Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 20/04/2017, à 17:16

Cyralien

Disque dur a jeter ?

Bonjour,

Suite a des dysfonctionnements ( error I/O ) je vous poste le retour d’un smartctl d’un ordinateur portable acheté il y a environ 3 mois.

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST2000LM015-2E8174
Serial Number:    WCC2K6RS
LU WWN Device Id: 5 000c50 09d46284e
Firmware Version: SDM1
User Capacity:    2 000 398 934 016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Apr 20 15:55:31 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 329) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   055   055   006    Pre-fail  Always       -       139840932
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       204
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       384
  7 Seek_Error_Rate         0x000f   072   060   045    Pre-fail  Always       -       8623626574
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       551 (140 117 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       192
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       12885098499
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   057   042   040    Old_age   Always       -       43 (Min/Max 27/43)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       81
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       61
193 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       5813
194 Temperature_Celsius     0x0022   043   058   000    Old_age   Always       -       43 (0 15 0 0 0)
197 Current_Pending_Sector  0x0012   091   091   000    Old_age   Always       -       768
198 Offline_Uncorrectable   0x0010   091   091   000    Old_age   Offline      -       768
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       538 (203 54 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       743748064
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       860941198
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk

1 - Le disque est-il bon pour la poubelle ? ( j’ai l’impression que oui )

2 - La valeur " G-Sense_Error_Rate " est a 81. Est-ce dû a un choc ?
      Si oui peut-elle remettre en cause la garantie ?

Merci d’avance pour vos réponses.

Hors ligne

#2 Le 20/04/2017, à 18:29

malbo

Re : Disque dur a jeter ?

Oui, tu peux le mettre en décharge sélective. Les lignes qui montrent qu'il est nase :

5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       384
197 Current_Pending_Sector  0x0012   091   091   000    Old_age   Always       -       768

Hors ligne

#3 Le 20/04/2017, à 20:41

Cyralien

Re : Disque dur a jeter ?

Merci, c’est bien ce qu’il me semblait.

Et qu’en est-il de la valeur 81 pour G-Sense_Error_Rate par rapport à la garantie ?

Hors ligne

#4 Le 21/04/2017, à 06:27

malbo

Re : Disque dur a jeter ?

Cyralien a écrit :

Et qu’en est-il de la valeur 81 pour G-Sense_Error_Rate par rapport à la garantie ?

Je ne suis pas familier de ce critère qui indique que le portable a été soumis à des chocs. Je ne sais pas si ça peut annuler ou pas la garantie.

Hors ligne