#1 Le 24/03/2017, à 12:00
- Bratock
proftpd qui ne demarre plus ! [resolu]
Bonjour
J'ai installé et configuré proftpd et proftpdadmin en suivant ce tutoriel :Tuto proftpd
Le probleme est que le serveur ftp ne veut plus démarrer.
J'ai cet erreur dans syslog :
Starting ftp server: proftpd2017-03-24 10:53:59,088 ns1.xxxxx.net proftpd[22072]: fatal: <IfModule>: unclosed <IfModule> context on line 255 of '/etc/proftpd/proftpd.conf'
Mar 24 10:53:59 ns1 proftpd[22065]: failed!
Mar 24 10:53:59 ns1 systemd[1]: proftpd.service: control process exited, code=exited status=1
Mar 24 10:53:59 ns1 systemd[1]: Failed to start LSB: Starts ProFTPD daemon.
Mar 24 10:53:59 ns1 systemd[1]: Unit proftpd.service entered failed state.
Voici mon fichier de config de proftpd.conf
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes, reload proftpd after modifications, if
# it runs in daemon mode. It is not required in inetd/xinetd mode.
#
# Includes DSO modules
Include /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
IdentLookups off
ServerName "Debian"
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"
DenyFilter \*.*/
DefaultRoot ~
RootLogin off
# Use this to jail all users in their homes
# DefaultRoot ~
# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off
# Port 21 is the standard FTP port.
Port 21
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534
# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4
# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User proftpd
Group nogroup
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off
TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log
# Logging onto /var/log/lastlog is enabled but set to off by default
#UseLastlog on
# In order to keep log file dates consistent after chroot, use timezone info
# from /etc/localtime. If this is not set, and proftpd is configured to
# chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight
# savings timezone regardless of whether DST is in effect.
#SetEnv TZ :/etc/localtime
<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>
<IfModule mod_ratio.c>
Ratios off
</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in
# http://www.securityfocus.com/bid/11430/discuss
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
Include /etc/proftpd/sql.conf
#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf
#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.conf
# A basic anonymous configuration, no upload directories.
# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>
MaxLoginAttempts 3
MaxClientsPerHost 3
ListOptions "" strict
<Directory />
HideFiles ^\..*
<Limit ALL>
IgnoreHidden On
</Limit>
</Directory>
RequireValidShell off
PassivePorts 53000 54000
# Include other custom configuration files
<IfModule mod_dynmasq.c>
DynMasqRefresh 28800
</IfModule>
MaxInstances 30
Umask 022 022
AllowRetrieveRestart on
AllowStoreRestart on
PathAllowFilter "[a-zA-Z0-9]"
#AllowFilter "^[a-zA-Z0-9@~ /,_.-]*$" DenyFilter "%"
IdentLookups on
<IfModule mod_sql.c>
SQLBackend mysql
</IfModule>
<IfModule mod_quotatab.c> QuotaEngine on </IfModule>
<IfModule mod_ratio.c> Ratios off </IfModule>
<IfModule mod_delay.c> DelayEngine on </IfModule>
<IfModule mod_ctrls.c> ControlsEngine on ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule>
<IfModule mod_ctrls_admin.c> AdminControlsEngine on </IfModule>
<IfModule>
SQLAuthTypes Crypt SQLAuthenticate users* groups*
Include /etc/proftpd/sql.conf
Include /etc/proftpd/tls.conf
Include /etc/proftpd/virtuals.conf
</IfModule>
SQLConnectInfo proftpd@localhost proftpd uobcrt8l
SQLUserInfo ftpuser userid passwd uid gid homedir shell SQLUserWhereClause "LoginAllowed = 'true'"
SQLGroupInfo ftpgroup groupname gid members
CreateHome on
SQLLog PASS updatecount SQLNamedQuery updatecount UPDATE "count=count+1, accessed=now() WHERE userid='%u'" ftpuser
SQLLog STOR,RETR modified SQLNamedQuery modified UPDATE "modified=now() WHERE userid='%u'" ftpuser
QuotaEngine on QuotaDirectoryTally on QuotaDisplayUnits Mb QuotaShowQuotas on
SQLNamedQuery get-quota-limit SELECT "name, quota_type, par_session, limit_type, bytes_up_limit, bytes_down_limit, bytes_transfer_limit, files_up_limit, files_down_limit, files_transfer_limit FROM ftpquotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_up_total, bytes_down_total, bytes_transfer_total, files_up_total, files_down_total, files_transfer_total FROM ftpquotatotal WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_up_total = bytes_up_total + %{0}, bytes_down_total = bytes_down_total + %{1}, bytes_transfer_total = bytes_transfer_total + %{2}, files_up_total = files_up_total + %{3}, files_down_total = files_down_total + %{4}, files_transfer_total = files_transfer_total + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" ftpquotatotal
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" ftpquotatotal
QuotaLimitTable sql:/get-quota-limit QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
SQLLogFile /var/log/proftpd/mysql.log
LogFormat auth "%v [%P] %h %t \"%r\" %s" ExtendedLog /var/log/proftpd/auth.log AUTH auth
LogFormat write "%h %l %u %t \"%r\" %s %b" ExtendedLog /var/log/proftpd/access.log WRITE,READ write
</IfModule>
Include /etc/proftpd/conf.d/
Merci pour votre aide
Cordialement
Dernière modification par Bratock (Le 24/03/2017, à 20:57)
Cordialement
Bratock
Hors ligne
#2 Le 24/03/2017, à 19:15
- Bratock
Re : proftpd qui ne demarre plus ! [resolu]
J'ai tenté une autree config et je me trouve avec un autre probleme
J'ai pas de mod_sql_mysql.c dans mes library proftpd . J'ai verifié et j'ai pas la library mod_sql_mysql.c dans /usr/lib/proftpd
et j'ai donc une erreur comme ceci :
proftpd[9267]: fatal: LoadModule: error loading module 'mod_sql_mysql.c': Aucun fichier ou dossier de ce type on line 35 of '/etc/proftpd/modules.conf'
Mar 24 18:11:05 ns1 proftpd[9260]: failed!
J'ai decommenté les lignes du module.conf:
LoadModule mod_sql.c
LoadModule mod_sql_mysql.c
Comme dit dans le tuto
Comment installer la library qui me manque ?
Merci à vous
Cordialement
Bratock
Hors ligne
#3 Le 24/03/2017, à 19:20
- Bratock
Re : proftpd qui ne demarre plus ! [resolu]
J'ai trouvé
Il suffisait d'installer le packet proftpd-mod-mysql
apt-get install proftpd-mod-mysql
Voila
Merci
Cordialement
Bratock
Hors ligne