#1 Le 21/03/2017, à 12:56
- MissPP
lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Bonjour très chers Amis,
Je me permets de vous demander votre aide, en effet, j'étais depuis des années sur la version 12.04 de Xubuntu, bien évidement, je n'avais plus aucune mise à jour depuis des lustres, FB, outlook, mozilla plantaient mais je m'en foutais un peu, car c'était une vraie fusée ma bécane, moins d'une minute à l'allumage avec IE connecté SVP 
Bref, je me suis quand même décidée à passer à la version 16.04 LTS en achetant la clef et le CD, je voulais bien faire pour une fois, et bien quelle déception '( mon PC n'a jamais été aussi long, j'ai même pas calculé le temps, tellement que ça me fout hors de moi, 15 plombes à l'allumage, chaque clic sur icône lui demande 20 plombes de plus, une horreur !! sur internet n'en parlons même pas !
On a l'impression qu'on lui demande 15 trucs en même temps, en plus je suis complètement paumée sur cette interface, je ne retrouve plus rien, je trouve que la prise en main est difficile, j'ai suivi quelques liens ici et là, fait quelques manip dans le terminal, mais il n'y a rien à faire, c'est de pire en pire, est-ce que quelqu'un d’extrêmement serviable, pourrait me filer un petit coup de pouce ?? je préfère dire que je suis novice pour éviter certains jargons linuxiens que je ne comprends pas !! Je vous suis d’ores et déjà super reconnaissante, je vous fais un copier-coller de mon dmesg que je ne comprends pas le moins du monde !
dmesg
[ 0.000000] Linux version 4.8.0-42-generic (buildd@lgw01-48) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #45~16.04.1-Ubuntu SMP Thu Mar 9 14:10:58 UTC 2017 (Ubuntu 4.8.0-42.45~16.04.1-generic 4.8.17)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.8.0-42-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f686bff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f686c00-0x000000003f688bff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f688c00-0x000000003f68abff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f68ac00-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Dell Inc. OptiPlex GX620 /0FH884, BIOS A07 03/31/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3f686 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] total RAM covered: 1015M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff893c400fe710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff893c40099000] 99000 size 24576
[ 0.000000] BRK [0x1d03b000, 0x1d03bfff] PGTABLE
[ 0.000000] BRK [0x1d03c000, 0x1d03cfff] PGTABLE
[ 0.000000] BRK [0x1d03d000, 0x1d03dfff] PGTABLE
[ 0.000000] BRK [0x1d03e000, 0x1d03efff] PGTABLE
[ 0.000000] BRK [0x1d03f000, 0x1d03ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33134000-0x35891fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FEB00 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000000FD24F 00005C (v01 DELL GX620 00000007 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000000FD347 0000F4 (v03 DELL GX620 00000007 ASL 00000061)
[ 0.000000] ACPI: DSDT 0x00000000FFFD32F4 003D69 (v01 DELL dt_ex 00001000 INTL 20050309)
[ 0.000000] ACPI: FACS 0x000000003F686C00 000040
[ 0.000000] ACPI: FACS 0x000000003F686C00 000040
[ 0.000000] ACPI: SSDT 0x00000000FFFD717C 0000AA (v01 DELL st_ex 00001000 INTL 20050309)
[ 0.000000] ACPI: APIC 0x00000000000FD43B 000072 (v01 DELL GX620 00000007 ASL 00000061)
[ 0.000000] ACPI: BOOT 0x00000000000FD4AD 000028 (v01 DELL GX620 00000007 ASL 00000061)
[ 0.000000] ACPI: ASF! 0x00000000000FD4D5 000067 (v16 DELL GX620 00000007 ASL 00000061)
[ 0.000000] ACPI: MCFG 0x00000000000FD53C 00003E (v01 DELL GX620 00000007 ASL 00000061)
[ 0.000000] ACPI: HPET 0x00000000000FD57A 000038 (v01 DELL GX620 00000007 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003f685fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x3f681000-0x3f685fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003f685fff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003f685fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f685fff]
[ 0.000000] On node 0 totalpages: 259621
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3995 pages used for memmap
[ 0.000000] DMA32 zone: 255622 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000003f800000-0x000000003fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff893c7f400000 s107864 r8192 d31400 u524288
[ 0.000000] pcpu-alloc: s107864 r8192 d31400 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255540
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-42-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 962136K/1038484K available (8829K kernel code, 1441K rwdata, 3832K rodata, 1548K init, 1296K bss, 76348K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.138 MHz processor
[ 0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.27 BogoMIPS (lpj=11172552)
[ 0.004026] pid_max: default: 32768 minimum: 301
[ 0.004049] ACPI: Core revision 20160422
[ 0.050984] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.051046] Security Framework initialized
[ 0.051049] Yama: becoming mindful.
[ 0.051079] AppArmor: AppArmor initialized
[ 0.051282] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.051792] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.052117] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.052123] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.052646] CPU: Physical Processor ID: 0
[ 0.052647] CPU: Processor Core ID: 0
[ 0.052651] mce: CPU supports 4 MCE banks
[ 0.052662] CPU0: Thermal monitoring enabled (TM1)
[ 0.052672] process: using mwait in idle threads
[ 0.052679] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.052681] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ 0.053322] Freeing SMP alternatives memory: 32K (ffffffff98ced000 - ffffffff98cf5000)
[ 0.056435] ftrace: allocating 33450 entries in 131 pages
[ 0.072196] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.072198] smpboot: Max logical packages: 2
[ 0.072614] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.116000] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (family: 0xf, model: 0x4, stepping: 0x7)
[ 0.116000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.116000] ... version: 0
[ 0.116000] ... bit width: 40
[ 0.116000] ... generic registers: 18
[ 0.116000] ... value mask: 000000ffffffffff
[ 0.116000] ... max period: 0000007fffffffff
[ 0.116000] ... fixed-purpose events: 0
[ 0.116000] ... event mask: 000000000003ffff
[ 0.116000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.116000] x86: Booting SMP configuration:
[ 0.116000] .... node #0, CPUs: #1
[ 0.126736] x86: Booted up 1 node, 2 CPUs
[ 0.126736] smpboot: Total of 2 processors activated (11172.55 BogoMIPS)
[ 0.128160] devtmpfs: initialized
[ 0.128160] x86/mm: Memory block size: 128MB
[ 0.132736] evm: security.selinux
[ 0.132737] evm: security.SMACK64
[ 0.132738] evm: security.SMACK64EXEC
[ 0.132739] evm: security.SMACK64TRANSMUTE
[ 0.132740] evm: security.SMACK64MMAP
[ 0.132741] evm: security.ima
[ 0.132742] evm: security.capability
[ 0.132789] PM: Registering ACPI NVS region [mem 0x3f686c00-0x3f688bff] (8192 bytes)
[ 0.132789] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.132789] pinctrl core: initialized pinctrl subsystem
[ 0.132789] RTC time: 9:35:44, date: 03/21/17
[ 0.132789] NET: Registered protocol family 16
[ 0.144009] cpuidle: using governor ladder
[ 0.156008] cpuidle: using governor menu
[ 0.156010] PCCT header not found.
[ 0.156055] Simple Boot Flag at 0x7a set to 0x1
[ 0.156070] ACPI: bus type PCI registered
[ 0.156073] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.156202] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.156205] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.156217] PCI: Using configuration type 1 for base access
[ 0.168098] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.168168] ACPI: Added _OSI(Module Device)
[ 0.168170] ACPI: Added _OSI(Processor Device)
[ 0.168172] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.168173] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.186985] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.198173] ACPI: Interpreter enabled
[ 0.198209] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.198212] ACPI: Using IOAPIC for interrupt routing
[ 0.198298] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.204496] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.280740] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.280749] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.280757] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.280772] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.285698] PCI host bridge to bus 0000:00
[ 0.285703] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.285706] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.285709] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.285711] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window]
[ 0.285714] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.285716] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff window]
[ 0.285719] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfebfffff window]
[ 0.285721] pci_bus 0000:00: root bus resource [mem 0xffa80800-0xffa80bff window]
[ 0.285724] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.285738] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.286168] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.286232] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.286555] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.286641] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[ 0.286656] pci 0000:00:02.0: reg 0x10: [mem 0xfeb00000-0xfeb7ffff]
[ 0.286664] pci 0000:00:02.0: reg 0x14: [io 0xe898-0xe89f]
[ 0.286671] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
[ 0.286678] pci 0000:00:02.0: reg 0x1c: [mem 0xfeac0000-0xfeafffff]
[ 0.287093] pci 0000:00:02.1: [8086:2776] type 00 class 0x038000
[ 0.287105] pci 0000:00:02.1: reg 0x10: [mem 0xfeb80000-0xfebfffff]
[ 0.287559] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.287649] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.287972] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.288071] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.288161] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.288485] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.288580] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.288628] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
[ 0.288973] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.289058] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.289106] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
[ 0.289450] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.289537] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.289585] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
[ 0.289932] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.290017] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.290064] pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f]
[ 0.290413] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.290505] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.290526] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[ 0.290622] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.291013] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.291385] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.291477] pci 0000:00:1e.2: [8086:27de] type 00 class 0x040100
[ 0.291494] pci 0000:00:1e.2: reg 0x10: [io 0xec00-0xecff]
[ 0.291504] pci 0000:00:1e.2: reg 0x14: [io 0xe8c0-0xe8ff]
[ 0.291514] pci 0000:00:1e.2: reg 0x18: [mem 0xfeabfa00-0xfeabfbff]
[ 0.291523] pci 0000:00:1e.2: reg 0x1c: [mem 0xfeabf900-0xfeabf9ff]
[ 0.291577] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.291975] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.292076] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.292082] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.292087] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.292090] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[ 0.292504] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.292520] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.292531] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.292541] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.292551] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.292562] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.292584] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.292587] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.292589] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.292591] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.292986] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.293003] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 0.293012] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
[ 0.293021] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
[ 0.293030] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
[ 0.293040] pci 0000:00:1f.2: reg 0x20: [io 0xfea0-0xfeaf]
[ 0.293087] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.293476] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.293535] pci 0000:00:1f.3: reg 0x20: [io 0xe8a0-0xe8bf]
[ 0.294003] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.294010] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.294106] pci 0000:02:00.0: [14e4:1677] type 00 class 0x020000
[ 0.294137] pci 0000:02:00.0: reg 0x10: [mem 0xfe8f0000-0xfe8fffff 64bit]
[ 0.294284] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.294387] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.294399] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.294406] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.294485] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.294493] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.294603] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.294615] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.294618] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.294621] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.294623] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode)
[ 0.294626] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.294628] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff window] (subtractive decode)
[ 0.294631] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfebfffff window] (subtractive decode)
[ 0.294633] pci 0000:00:1e.0: bridge window [mem 0xffa80800-0xffa80bff window] (subtractive decode)
[ 0.309577] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.310110] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.310616] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.311179] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.311690] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.312408] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.312961] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.313465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.313658] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.314207] SCSI subsystem initialized
[ 0.314272] libata version 3.00 loaded.
[ 0.314272] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.314272] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.314272] vgaarb: loaded
[ 0.314272] vgaarb: bridge control possible 0000:00:02.0
[ 0.314272] ACPI: bus type USB registered
[ 0.314272] usbcore: registered new interface driver usbfs
[ 0.314272] usbcore: registered new interface driver hub
[ 0.314272] usbcore: registered new device driver usb
[ 0.314272] PCI: Using ACPI for IRQ routing
[ 0.316515] PCI: pci_cache_line_size set to 64 bytes
[ 0.316579] e820: reserve RAM buffer [mem 0x3f686c00-0x3fffffff]
[ 0.316799] NetLabel: Initializing
[ 0.316801] NetLabel: domain hash size = 128
[ 0.316802] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.316823] NetLabel: unlabeled traffic allowed by default
[ 0.316865] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.316865] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316865] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.318143] clocksource: Switched to clocksource hpet
[ 0.334049] VFS: Disk quotas dquot_6.6.0
[ 0.334087] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.334294] AppArmor: AppArmor Filesystem Enabled
[ 0.334404] pnp: PnP ACPI init
[ 0.337281] pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.337284] pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.337353] system 00:00: [io 0x0c00-0x0c7f] has been reserved
[ 0.337362] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.337576] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.346145] pnp 00:02: [dma 0 disabled]
[ 0.347218] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.350329] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.362518] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.362522] system 00:04: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.362525] system 00:04: [mem 0x01000000-0x3f686bff] could not be reserved
[ 0.362528] system 00:04: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.362531] system 00:04: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.362534] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.362537] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.362540] system 00:04: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.362543] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.362546] system 00:04: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.362552] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.365810] system 00:05: [io 0x0100-0x01fe] could not be reserved
[ 0.365813] system 00:05: [io 0x0200-0x0277] has been reserved
[ 0.365816] system 00:05: [io 0x0280-0x02e7] has been reserved
[ 0.365819] system 00:05: [io 0x02f0-0x02f7] has been reserved
[ 0.365822] system 00:05: [io 0x0300-0x0377] could not be reserved
[ 0.365824] system 00:05: [io 0x0380-0x03bb] has been reserved
[ 0.365827] system 00:05: [io 0x03c0-0x03e7] has been reserved
[ 0.365830] system 00:05: [io 0x03f6-0x03f7] could not be reserved
[ 0.365833] system 00:05: [io 0x0400-0x04cf] has been reserved
[ 0.365836] system 00:05: [io 0x04d2-0x057f] has been reserved
[ 0.365838] system 00:05: [io 0x0580-0x0677] has been reserved
[ 0.365841] system 00:05: [io 0x0680-0x0777] has been reserved
[ 0.365844] system 00:05: [io 0x0780-0x07bb] has been reserved
[ 0.365847] system 00:05: [io 0x07c0-0x07ff] has been reserved
[ 0.365850] system 00:05: [io 0x08e0-0x08ff] has been reserved
[ 0.365853] system 00:05: [io 0x0900-0x09fe] has been reserved
[ 0.365855] system 00:05: [io 0x0a00-0x0afe] has been reserved
[ 0.365858] system 00:05: [io 0x0b00-0x0bfe] has been reserved
[ 0.365861] system 00:05: [io 0x0c80-0x0caf] has been reserved
[ 0.365864] system 00:05: [io 0x0cb0-0x0cbf] has been reserved
[ 0.365867] system 00:05: [io 0x0cc0-0x0cf7] has been reserved
[ 0.365870] system 00:05: [io 0x0d00-0x0dfe] has been reserved
[ 0.365873] system 00:05: [io 0x0e00-0x0efe] has been reserved
[ 0.365875] system 00:05: [io 0x0f00-0x0ffe] has been reserved
[ 0.365878] system 00:05: [io 0x2000-0x20fe] has been reserved
[ 0.365881] system 00:05: [io 0x2100-0x21fe] has been reserved
[ 0.365884] system 00:05: [io 0x2200-0x22fe] has been reserved
[ 0.365887] system 00:05: [io 0x2300-0x23fe] has been reserved
[ 0.365890] system 00:05: [io 0x2400-0x24fe] has been reserved
[ 0.365893] system 00:05: [io 0x2500-0x25fe] has been reserved
[ 0.365896] system 00:05: [io 0x2600-0x26fe] has been reserved
[ 0.365898] system 00:05: [io 0x2700-0x27fe] has been reserved
[ 0.365901] system 00:05: [io 0x2800-0x28fe] has been reserved
[ 0.365904] system 00:05: [io 0x2900-0x29fe] has been reserved
[ 0.365907] system 00:05: [io 0x2a00-0x2afe] has been reserved
[ 0.365910] system 00:05: [io 0x2b00-0x2bfe] has been reserved
[ 0.365913] system 00:05: [io 0x2c00-0x2cfe] has been reserved
[ 0.365916] system 00:05: [io 0x2d00-0x2dfe] has been reserved
[ 0.365919] system 00:05: [io 0x2e00-0x2efe] has been reserved
[ 0.365922] system 00:05: [io 0x2f00-0x2ffe] has been reserved
[ 0.365924] system 00:05: [io 0x5000-0x50fe] has been reserved
[ 0.365927] system 00:05: [io 0x5100-0x51fe] has been reserved
[ 0.365930] system 00:05: [io 0x5200-0x52fe] has been reserved
[ 0.365933] system 00:05: [io 0x5300-0x53fe] has been reserved
[ 0.365936] system 00:05: [io 0x5400-0x54fe] has been reserved
[ 0.365939] system 00:05: [io 0x5500-0x55fe] has been reserved
[ 0.365942] system 00:05: [io 0x5600-0x56fe] has been reserved
[ 0.365945] system 00:05: [io 0x5700-0x57fe] has been reserved
[ 0.365948] system 00:05: [io 0x5800-0x58fe] has been reserved
[ 0.365951] system 00:05: [io 0x5900-0x59fe] has been reserved
[ 0.365955] system 00:05: [io 0x5a00-0x5afe] has been reserved
[ 0.365958] system 00:05: [io 0x5b00-0x5bfe] has been reserved
[ 0.365961] system 00:05: [io 0x5c00-0x5cfe] has been reserved
[ 0.365964] system 00:05: [io 0x5d00-0x5dfe] has been reserved
[ 0.365967] system 00:05: [io 0x5e00-0x5efe] has been reserved
[ 0.365970] system 00:05: [io 0x5f00-0x5ffe] has been reserved
[ 0.365973] system 00:05: [io 0x6000-0x60fe] has been reserved
[ 0.365976] system 00:05: [io 0x6100-0x61fe] has been reserved
[ 0.365979] system 00:05: [io 0x6200-0x62fe] has been reserved
[ 0.365983] system 00:05: [io 0x6300-0x63fe] has been reserved
[ 0.365986] system 00:05: [io 0x6400-0x64fe] has been reserved
[ 0.365989] system 00:05: [io 0x6500-0x65fe] has been reserved
[ 0.365996] system 00:05: [io 0x6600-0x66fe] has been reserved
[ 0.366000] system 00:05: [io 0x6700-0x67fe] has been reserved
[ 0.366003] system 00:05: [io 0x6800-0x68fe] has been reserved
[ 0.366006] system 00:05: [io 0x6900-0x69fe] has been reserved
[ 0.366010] system 00:05: [io 0x6a00-0x6afe] has been reserved
[ 0.366013] system 00:05: [io 0x6b00-0x6bfe] has been reserved
[ 0.366016] system 00:05: [io 0x6c00-0x6cfe] has been reserved
[ 0.366020] system 00:05: [io 0x6d00-0x6dfe] has been reserved
[ 0.366023] system 00:05: [io 0x6e00-0x6efe] has been reserved
[ 0.366027] system 00:05: [io 0x6f00-0x6ffe] has been reserved
[ 0.366030] system 00:05: [io 0xa000-0xa0fe] has been reserved
[ 0.366033] system 00:05: [io 0xa100-0xa1fe] has been reserved
[ 0.366037] system 00:05: [io 0xa200-0xa2fe] has been reserved
[ 0.366041] system 00:05: [io 0xa300-0xa3fe] has been reserved
[ 0.366044] system 00:05: [io 0xa400-0xa4fe] has been reserved
[ 0.366048] system 00:05: [io 0xa500-0xa5fe] has been reserved
[ 0.366051] system 00:05: [io 0xa600-0xa6fe] has been reserved
[ 0.366055] system 00:05: [io 0xa700-0xa7fe] has been reserved
[ 0.366059] system 00:05: [io 0xa800-0xa8fe] has been reserved
[ 0.366062] system 00:05: [io 0xa900-0xa9fe] has been reserved
[ 0.366066] system 00:05: [io 0xaa00-0xaafe] has been reserved
[ 0.366069] system 00:05: [io 0xab00-0xabfe] has been reserved
[ 0.366073] system 00:05: [io 0xac00-0xacfe] has been reserved
[ 0.366077] system 00:05: [io 0xad00-0xadfe] has been reserved
[ 0.366081] system 00:05: [io 0xae00-0xaefe] has been reserved
[ 0.366085] system 00:05: [io 0xaf00-0xaffe] has been reserved
[ 0.366088] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.366091] system 00:05: [mem 0xfeda0000-0xfedacfff] has been reserved
[ 0.366097] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.366105] pnp: PnP ACPI: found 6 devices
[ 0.375015] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.375045] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.375049] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.375059] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.375062] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.375082] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.375085] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.375088] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.375091] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.375093] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.375096] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.375098] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.375101] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.375115] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.375122] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.375127] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.375131] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.375137] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.375143] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.375150] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.375154] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.375159] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.375164] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.375170] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.375174] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.375179] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.375183] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.375190] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.375204] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.375207] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.375209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.375212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[ 0.375214] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[ 0.375217] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff window]
[ 0.375219] pci_bus 0000:00: resource 10 [mem 0xf4000000-0xfebfffff window]
[ 0.375221] pci_bus 0000:00: resource 11 [mem 0xffa80800-0xffa80bff window]
[ 0.375224] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.375227] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.375229] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.375231] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.375234] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.375236] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.375239] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.375241] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.375244] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.375246] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.375249] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff window]
[ 0.375251] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff window]
[ 0.375254] pci_bus 0000:04: resource 9 [mem 0x80000000-0xefffffff window]
[ 0.375256] pci_bus 0000:04: resource 10 [mem 0xf4000000-0xfebfffff window]
[ 0.375259] pci_bus 0000:04: resource 11 [mem 0xffa80800-0xffa80bff window]
[ 0.375321] NET: Registered protocol family 2
[ 0.375670] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.375707] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.375754] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.375824] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.375834] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.375912] NET: Registered protocol family 1
[ 0.375939] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.378976] PCI: CLS 64 bytes, default 64
[ 0.379080] Unpacking initramfs...
[ 1.503139] Freeing initrd memory: 40312K (ffff893c73134000 - ffff893c75892000)
[ 1.503370] Scanning for low memory corruption every 60 seconds
[ 1.503966] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.504035] audit: initializing netlink subsys (disabled)
[ 1.504085] audit: type=2000 audit(1490088945.504:1): initialized
[ 1.504604] Initialise system trusted keyrings
[ 1.504770] workingset: timestamp_bits=40 max_order=18 bucket_order=0
[ 1.508986] zbud: loaded
[ 1.509959] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.510311] fuse init (API version 7.25)
[ 1.510619] Allocating IMA blacklist keyring.
[ 1.512646] Key type asymmetric registered
[ 1.512648] Asymmetric key parser 'x509' registered
[ 1.512744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.512797] io scheduler noop registered
[ 1.512799] io scheduler deadline registered (default)
[ 1.512820] io scheduler cfq registered
[ 1.514339] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.514352] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.514422] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.514424] vesafb: scrolling: redraw
[ 1.514426] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.514449] vesafb: framebuffer at 0xe0000000, mapped to 0xffffa5bec0400000, using 3072k, total 3072k
[ 1.514646] Console: switching to colour frame buffer device 128x48
[ 1.514668] fb0: VESA VGA frame buffer device
[ 1.514826] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.514832] ACPI: Power Button [VBTN]
[ 1.514926] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.514929] ACPI: Power Button [PWRF]
[ 1.515241] GHES: HEST is not enabled!
[ 1.515385] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.535904] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.539001] Linux agpgart interface v0.103
[ 1.542203] loop: module loaded
[ 1.542481] ata_piix 0000:00:1f.1: version 2.13
[ 1.543758] scsi host0: ata_piix
[ 1.543943] scsi host1: ata_piix
[ 1.544067] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.544069] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.544330] ata2: port disabled--ignoring
[ 1.544444] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.704704] scsi host2: ata_piix
[ 1.704883] scsi host3: ata_piix
[ 1.704974] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
[ 1.704976] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
[ 1.705169] libphy: Fixed MDIO Bus: probed
[ 1.705171] tun: Universal TUN/TAP device driver, 1.6
[ 1.705173] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.705265] PPP generic driver version 2.4.2
[ 1.705359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.705365] ehci-pci: EHCI PCI platform driver
[ 1.705756] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.705768] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.705783] ehci-pci 0000:00:1d.7: debug port 1
[ 1.706763] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GWA4164B, D108, max UDMA/33
[ 1.709702] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.709724] ehci-pci 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 1.711490] ata1.00: configured for UDMA/33
[ 1.714602] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GWA4164B D108 PQ: 0 ANSI: 5
[ 1.724022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.724119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.724122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.724124] usb usb1: Product: EHCI Host Controller
[ 1.724127] usb usb1: Manufacturer: Linux 4.8.0-42-generic ehci_hcd
[ 1.724129] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.724382] hub 1-0:1.0: USB hub found
[ 1.724395] hub 1-0:1.0: 8 ports detected
[ 1.724825] ehci-platform: EHCI generic platform driver
[ 1.724849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.724854] ohci-pci: OHCI PCI platform driver
[ 1.724876] ohci-platform: OHCI generic platform driver
[ 1.724890] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.725259] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.725272] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.725281] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.725305] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 1.725399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.725402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.725404] usb usb2: Product: UHCI Host Controller
[ 1.725406] usb usb2: Manufacturer: Linux 4.8.0-42-generic uhci_hcd
[ 1.725408] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.725626] hub 2-0:1.0: USB hub found
[ 1.725638] hub 2-0:1.0: 2 ports detected
[ 1.726152] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.726160] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.726169] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.726202] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 1.726293] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.726296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.726298] usb usb3: Product: UHCI Host Controller
[ 1.726300] usb usb3: Manufacturer: Linux 4.8.0-42-generic uhci_hcd
[ 1.726302] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.726504] hub 3-0:1.0: USB hub found
[ 1.726514] hub 3-0:1.0: 2 ports detected
[ 1.726805] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.726809] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.727020] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.727034] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.727046] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.727079] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.727087] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.727162] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.727165] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.727167] usb usb4: Product: UHCI Host Controller
[ 1.727169] usb usb4: Manufacturer: Linux 4.8.0-42-generic uhci_hcd
[ 1.727171] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.727208] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.727528] hub 4-0:1.0: USB hub found
[ 1.727540] hub 4-0:1.0: 2 ports detected
[ 1.728088] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.728097] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.728104] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.728139] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 1.728217] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.728220] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.728222] usb usb5: Product: UHCI Host Controller
[ 1.728224] usb usb5: Manufacturer: Linux 4.8.0-42-generic uhci_hcd
[ 1.728226] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.728439] hub 5-0:1.0: USB hub found
[ 1.728458] hub 5-0:1.0: 2 ports detected
[ 1.728742] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.731707] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.731714] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.731996] mousedev: PS/2 mouse device common for all mice
[ 1.732292] rtc_cmos 00:01: RTC can wake from S4
[ 1.732463] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.732492] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.732504] i2c /dev entries driver
[ 1.732630] device-mapper: uevent: version 1.0.3
[ 1.732772] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.732806] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.733378] NET: Registered protocol family 10
[ 1.733802] NET: Registered protocol family 17
[ 1.733815] Key type dns_resolver registered
[ 1.734178] microcode: sig=0xf47, pf=0x10, revision=0x3
[ 1.734263] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.734532] registered taskstats version 1
[ 1.734540] Loading compiled-in X.509 certificates
[ 1.740295] Loaded X.509 cert 'Build time autogenerated kernel key: 636a06f854df4b3e5c70b0d6b1ef5516b00d0858'
[ 1.740328] zswap: loaded using pool lzo/zbud
[ 1.769647] Key type big_key registered
[ 1.773355] Key type trusted registered
[ 1.776996] Key type encrypted registered
[ 1.777002] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.777006] ima: No TPM chip found, activating TPM-bypass!
[ 1.777047] evm: HMAC attrs: 0x1
[ 1.777403] Magic number: 9:541:576
[ 1.777536] rtc_cmos 00:01: setting system clock to 2017-03-21 09:35:46 UTC (1490088946)
[ 1.777695] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.777696] EDD information not available.
[ 1.777789] PM: Hibernation image not present or could not be loaded.
[ 1.941256] ata3.00: ATA-7: ST3808110AS, 3.ADH, max UDMA/133
[ 1.941261] ata3.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 2.016218] ata3.00: configured for UDMA/133
[ 2.016423] scsi 2:0:0:0: Direct-Access ATA ST3808110AS H PQ: 0 ANSI: 5
[ 2.048318] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.048371] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.048408] sd 2:0:0:0: [sda] Write Protect is off
[ 2.048412] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.048453] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.108398] sda: sda1 sda2 < sda5 >
[ 2.108959] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.188025] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 2.528026] tsc: Refined TSC clocksource calibration: 2793.072 MHz
[ 2.528032] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2842b05730a, max_idle_ns: 440795313549 ns
[ 2.582044] usb 3-2: New USB device found, idVendor=413c, idProduct=2005
[ 2.582048] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.582050] usb 3-2: Product: DELL USB Keyboard
[ 2.582052] usb 3-2: Manufacturer: DELL
[ 2.796018] usb 1-7: new high-speed USB device number 3 using ehci-pci
[ 3.089771] usb 1-7: New USB device found, idVendor=174c, idProduct=55aa
[ 3.089774] usb 1-7: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.089776] usb 1-7: Product: USB 3.0 device
[ 3.089778] usb 1-7: Manufacturer: Intenso
[ 3.089780] usb 1-7: SerialNumber: 90600000000000000D35
[ 3.404018] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 3.552110] clocksource: Switched to clocksource tsc
[ 3.598039] usb 5-2: New USB device found, idVendor=046d, idProduct=c52f
[ 3.598042] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.598045] usb 5-2: Product: USB Receiver
[ 3.598047] usb 5-2: Manufacturer: Logitech
[ 5.955002] Freeing unused kernel memory: 1548K (ffffffff98b6a000 - ffffffff98ced000)
[ 5.955004] Write protecting the kernel read-only data: 14336k
[ 5.956204] Freeing unused kernel memory: 1396K (ffff893c5c6a3000 - ffff893c5c800000)
[ 5.957434] Freeing unused kernel memory: 264K (ffff893c5cbbe000 - ffff893c5cc00000)
[ 5.969571] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.993605] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.993787] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.993816] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.993851] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 5.995402] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.995476] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.997785] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.997918] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.998599] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.998728] random: udevadm: uninitialized urandom read (16 bytes read)
[ 6.072339] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 6.073262] [drm] Initialized drm 1.1.0 20060810
[ 6.106329] pps_core: LinuxPPS API ver. 1 registered
[ 6.106332] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.115265] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.128508] usbcore: registered new interface driver usb-storage
[ 6.137650] PTP clock support registered
[ 6.152797] tg3.c:v3.137 (May 11, 2014)
[ 6.153778] pci 0000:00:00.0: Intel 945G Chipset
[ 6.153799] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 6.154197] pci 0000:00:00.0: detected 8192K stolen memory
[ 6.154254] [drm] Memory usable by graphics device = 256M
[ 6.154259] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 6.154261] fb: switching to inteldrmfb from VESA VGA
[ 6.154325] Console: switching to colour dummy device 80x25
[ 6.154535] scsi host4: uas
[ 6.154763] usbcore: registered new interface driver uas
[ 6.154875] [drm] Replacing VGA console driver
[ 6.154918] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.154919] [drm] Driver supports precise vblank timestamp query.
[ 6.156002] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.156171] scsi 4:0:0:0: Direct-Access Intenso USB 3.0 device 0 PQ: 0 ANSI: 6
[ 6.162805] usbcore: registered new interface driver usbhid
[ 6.162808] usbhid: USB HID core driver
[ 6.179574] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001] (PCI Express) MAC address 00:13:72:90:ad:48
[ 6.179579] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 6.179582] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 6.179585] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 6.180933] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.181411] sd 4:0:0:0: [sdb] Spinning up disk...
[ 6.188722] [drm] RC6 disabled, disabling runtime PM support
[ 6.188755] [drm] initialized overlay support
[ 6.197810] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[ 6.233861] tg3 0000:02:00.0 enp2s0: renamed from eth0
[ 6.234862] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:413C:2005.0001/input/input5
[ 6.292233] hid-generic 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 6.292536] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:046D:C52F.0002/input/input6
[ 6.292753] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
[ 6.296275] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:046D:C52F.0003/input/input7
[ 6.356262] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
[ 6.377803] fbcon: inteldrmfb (fb0) is primary device
[ 6.377927] Console: switching to colour frame buffer device 180x56
[ 6.377961] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.200019] ..ready
[ 8.225913] sd 4:0:0:0: [sdb] 488378646 4096-byte logical blocks: (2.00 TB/1.82 TiB)
[ 8.227276] sd 4:0:0:0: [sdb] Write Protect is off
[ 8.227280] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 8.228027] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.231262] random: fast init done
[ 8.243058] sdb: sdb1
[ 8.246025] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 9.184043] floppy0: no floppy controllers found
[ 15.519669] random: crng init done
[ 18.919804] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 21.478224] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 21.478485] systemd[1]: Detected architecture x86-64.
[ 21.528149] systemd[1]: Set hostname to <pp-OptiPlex-GX620>.
[ 24.379456] systemd[1]: Listening on Journal Socket.
[ 24.379602] systemd[1]: Reached target Encrypted Volumes.
[ 24.379672] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 24.379741] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 24.379839] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 24.379925] systemd[1]: Listening on udev Control Socket.
[ 24.379971] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 26.492338] lp: driver loaded but no devices found
[ 26.577864] ppdev: user-space parallel port driver
[ 26.696645] parport_pc 00:02: reported by Plug and Play ACPI
[ 26.696733] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[ 26.792201] lp0: using parport0 (interrupt-driven).
[ 26.876162] systemd[1]: Started Load Kernel Modules.
[ 26.896239] systemd[1]: Mounting FUSE Control File System...
[ 26.897636] systemd[1]: Starting Apply Kernel Variables...
[ 26.906217] systemd[1]: Mounted FUSE Control File System.
[ 26.936424] systemd[1]: Started Journal Service.
[ 34.793009] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 35.553790] systemd-journald[267]: Received request to flush runtime journal from PID 1
[ 36.728037] intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 36.741499] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 37.242910] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\GIC3) (20160422/utaddress-255)
[ 37.242920] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082B-0x000000000000082B (\GIC2) (20160422/utaddress-255)
[ 37.242927] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20160422/utaddress-255)
[ 37.242933] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20160422/utaddress-255)
[ 37.242938] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20160422/utaddress-255)
[ 37.242944] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 37.242948] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008B8 (\GHI0) (20160422/utaddress-255)
[ 37.242953] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 37.242955] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088E-0x000000000000088E (\GIC1) (20160422/utaddress-255)
[ 37.242961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 37.242962] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 37.449744] leds_ss4200: no LED devices found
[ 39.156946] snd_intel8x0 0000:00:1e.2: white list rate for 1028:01ad is 48000
[ 39.904087] floppy0: no floppy controllers found
[ 40.122892] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 54.404406] Adding 1040380k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:1040380k FS
[ 74.464234] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 74.525306] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 84.441960] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 84.475410] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 86.082145] tg3 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex
[ 86.082158] tg3 0000:02:00.0 enp2s0: Flow control is on for TX and on for RX
[ 86.082188] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 127.884925] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 21/03/2017, à 12:59)
Hors ligne
#2 Le 21/03/2017, à 13:16
- erresse
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Bonjour,
Je compatis à ta déception, mais j'ai lu que tu utilisais Xubuntu 12.04 et que tu aurais acheté (et installé, donc) la version de Ubuntu 16.04 ?
Si tel est le cas, en effet, tu dois être déroutée par l'interface Unity qui n'a rien à voir avec celle de Xubuntu, et tu ne peux ignorer que la variante Xubuntu est recommandée pour sa légèreté en comparaison d'Ubuntu, on en parle souvent sur le forum...
Il est possible que ta nouvelle installation se traîne parce-que la distribution n'est pas adaptée pour ton matériel (en-dehors d'un problème que révélera peut-être le journal que tu as joint).
Pourquoi n'avoir pas poursuivi avec la variante Xubuntu dont tu avais l'habitude et qui semblait bien convenir à ton matériel ?
Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.
Hors ligne
#3 Le 21/03/2017, à 13:28
- MissPP
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Bonjour Erresse
Merci pour ta compréhension et pour te répondre, c'est que sur le site, il n'y a que cette version de ubuntu 16.04 LTS qui est en vente, car sinon, pour être sincère, j'aurais probablement campé sur mes vieilles habitudes !! et en effet Xubuntu, c'est de la balle !! je le regrette déjà 
Hors ligne
#4 Le 21/03/2017, à 13:45
- cqfd93
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Bonjour,
Il n'est pas trop tard pour télécharger Xubuntu et te faire une clé USB live pour l'installer à la place d'Ubuntu.
− cqfd93 −
Hors ligne
#5 Le 21/03/2017, à 15:08
- Watael
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
salut MissPP,
quel est ce site qui vend Ubuntu ?
les mecs sont gonflés, ils vendent un truc gratuit !
Connected \o/
Welcome to sHell. · eval is evil.
Hors ligne
#6 Le 21/03/2017, à 15:17
- michel_04
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Bonjour,
Watael a écrit :
quel est ce site qui vend Ubuntu ?
les mecs sont gonflés, ils vendent un truc gratuit !
Hum! 
Accueil du sit Ubuntu-fr (Communauté francophone d'utilisateurs d'Ubuntu) : Commander Ubuntu en DVD ou clé USB
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#7 Le 21/03/2017, à 15:18
- lepetit
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
ben ils vendent la clé usb, et le fait de mettre le programme dessus (oui bon je sais 
)
l'open source n'interdit pas de se faire de l'argent dessus. La license le permet normalement.
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#8 Le 21/03/2017, à 17:08
- MissPP
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Bonjour à tous et merci pour votre intervention, alors dans l'ordre, il ne m'a pas fallu longtemps pour comprendre grâce à l'intervention de Erresse que le problème résidait dans la version et comme le précise cqfd93, je n'avais plus qu'à me faire ma propre clef amorçable avec Xubuntu 16.04, pour répondre à Watael, oui, je sais que c'est gratuit, et c'est bien le site que michel_04 met en lien, on va dire que c'était ma petite contribution au monde linuxien, mais plus de 20 € pour une version que je n'utiliserai plus jamais, ça fout un peu les boules, bon, j'ai gagné une clef 16 Go, soit dit en passant, si j'avais su que cette version était aussi lourde, j'aurai bien sûr évité cette dépense inutile
Merci à tous pour votre intérêt à mon problème, qui est résolu à présent, car XUBUNTU 16.04 c'est la dynamite en PC !! 300 km/h sur le réseau, ça déménage , j'ai enfin retrouvé ma fusée, merci encore à tous, et bonne soirée
Hors ligne
#9 Le 21/03/2017, à 17:09
- erresse
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Bah, je suis surpris quand même que cette "offre" d'acheter un DVD ou une clé "tout faits" ne propose QUE Ubuntu ?
Les autres variantes ne sont pas disponibles sous cette forme ?
(En même temps, j'ai toujours, comme la plupart d'entre nous, téléchargé et gravé ou fait une clé moi-même sur ma machine, je ne suis donc pas au courant des autres options...)
Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.
Hors ligne
#10 Le 21/03/2017, à 17:24
- MissPP
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
bah oui, moi aussi à vrai dire, sachant que l'on a ce que l'on veut en guise de versions téléchargeables directement sur le site pour faire son propre système d'installation, sincère, j'ai du me dire à un instant que ça devait être génial d'avoir une vraie version de ubuntu, sans défaut, sans fichiers manquants, labellisé et tout, et tout !! tanpis pour moi, ça m'apprendra à pas faire confiance au feeling, bizarrement, j'ai mis une plombe à me décider !! en tous cas, merci encore Erresse pour ton petit message de ce matin qui m'a permis de comprendre l'essentiel de mon problème, Bonne fin d'après-midi à toi et à tantôt !
Hors ligne
#11 Le 21/03/2017, à 18:23
- nam1962
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
MissPP a écrit :
(...)
Merci à tous pour votre intérêt à mon problème, qui est résolu à présent, car XUBUNTU 16.04 c'est la dynamite en PC !! 300 km/h sur le réseau, ça déménage , j'ai enfin retrouvé ma fusée, (...)
..fusée que tu peux encore améliorer avec quelques réglages d'optimisation, dont la swappiness.
Quelles sont les caractéristiques de ton ordi ?
[ Modéré ]
Hors ligne
#12 Le 22/03/2017, à 00:03
- chinois02
Re : lenteur extrême après l'achat et l'installation de ubuntu 16.04 LTS
Ça sent le netbook sous atom n230
Peux-tu faire un:
sudo lshw?
N'importe qui peut voir ce que tu sembles être; quelques rares seulement peuvent tâter ce que tu est. Et ces derniers n'osent contredire l'opinion du grand nombre, renforcés par toute la majesté de l'État. Machiavel-Le Prince.
Hors ligne