Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/03/2017, à 20:46

tawguyz

manette xbox micromania non reconnu

Je dispose d'une manette xbox de chez micromania, cette dernière n'est pas reconnu sur ubuntu 16.04 alors que toutes mes autres manettes xbox (qui elles ne sont pas de chez micromania) fonctionnent. Voilà ce que j'ai essayé :

le logiciel antimicro ou qjoypad ne la reconnaît pas.

N'est pas reconnu avec le kernel 4.8 comme avec le 4.4

Installation du paquet xbodrv et chargement du module : nada.

Installation du paquet steamos-xpad-dkms via ppa:mdeslaur/steamos : rien non plus

Si vous avez une solution ?

Hors ligne

#2 Le 15/03/2017, à 23:29

foustala

Re : manette xbox micromania non reconnu

hello,

que donnent les commandes suivantes juste avant et juste après avoir branché la manette

lsusb -t
dmesg | tail

Hors ligne

#3 Le 17/03/2017, à 12:31

tawguyz

Re : manette xbox micromania non reconnu

 lsusb -t
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M
    |__ Port 3: Dev 2, If 0, Class=Hub, Driver=hub/4p, 12M
        |__ Port 1: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 2: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 6, If 2, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 5: Dev 7, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 5: Dev 7, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 7: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M



dmesg | tail
[54010.002425] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:8c:10:d4:81:85:64:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2 
[54050.004067] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:8c:10:d4:81:85:64:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2 
[54051.485110] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:fb:40:f0:2f:cb:f2:1d:08:00 SRC=192.168.1.18 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=6414 PROTO=2 
[54090.006225] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:8c:10:d4:81:85:64:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2 
[54090.989254] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:fb:40:f0:2f:cb:f2:1d:08:00 SRC=192.168.1.18 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=6417 PROTO=2 
[54130.006980] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:8c:10:d4:81:85:64:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2 
[54131.495868] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:40:f0:2f:cb:f2:1d:08:00 SRC=192.168.1.18 DST=239.255.255.250 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=2000 PROTO=2 
[54138.998018] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:fb:40:f0:2f:cb:f2:1d:08:00 SRC=192.168.1.18 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=6423 PROTO=2                        
[54170.008379] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:8c:10:d4:81:85:64:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2                           
[54177.878393] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:fb:8c:10:d4:81:85:64:08:00 SRC=192.168.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2 



Après branchement


~$ dmesg | tail
[54303.652357]  [<ffffffffb6111d8f>] SYSC_finit_module+0xdf/0x110
[54303.653520]  [<ffffffffb6111dde>] SyS_finit_module+0xe/0x10
[54303.654650]  [<ffffffffb689a7f6>] entry_SYSCALL_64_fastpath+0x1e/0xa8
[54303.655775] Code: 41 8b 9e cc 00 00 00 8d 53 fd 83 fa 01 0f 97 c2 0f b6 d2 48 8d 34 95 00 00 00 00 48 01 f2 8b 37 48 c1 e2 04 48 03 51 18 c1 e6 08 <0f> b6 4a 06 0f b6 52 02 48 89 78 48 4c 89 40 68 c7 80 88 00 00 
[54303.658213] RIP  [<ffffffffc0c20b8b>] xpad_probe+0x21b/0x5d5 [xpad]
[54303.659389]  RSP <ffff9aedff3bfac0>
[54303.660580] CR2: 0000000000000056
[54303.665579] ---[ end trace 819abbb313d8bdb6 ]---
[54314.830064] usb 2-2: USB disconnect, device number 32
[54330.016613] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:8c:10:d4:81:85:64:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2 

La commande lsusb -t bug après branchement aucun retour, j'ai essayé alors cette commande


dmesg | grep -i usb

[54303.400398] usb 2-2: new full-speed USB device number 32 using xhci_hcd
[54303.541504] usb 2-2: New USB device found, idVendor=0e6f, idProduct=015c
[54303.541507] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[54303.541509] usb 2-2: Product: Wired Controller for Xbox One
[54303.541510] usb 2-2: Manufacturer: Performance Designed Products
[54303.541511] usb 2-2: SerialNumber: 00003F6CA87B3FE4
[54303.591328] input: Generic X-Box pad as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/input/input26
[54303.591962] Modules linked in: xpad(OE+) ff_memless uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev media ccm pci_stub rfcomm vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) bnep binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp acer_wmi sparse_keymap coretemp kvm_intel kvm irqbypass crct10dif_pclmul arc4 crc32_pclmul ghash_clmulni_intel ath3k btusb aesni_intel snd_soc_rt5640 btrtl btbcm ath9k btintel ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 ath9k_common snd_soc_rl6231 bluetooth aes_x86_64 xt_hl ip6t_rt snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic nf_conntrack_ipv6 nf_defrag_ipv6 lrw ath9k_hw snd_soc_core snd_hda_intel snd_hda_codec snd_hda_core hid_multitouch glue_helper snd_compress ac97_bus ablk_helper cryptd ath
[54303.592543]  snd_pcm_dmaengine snd_hwdep intel_cstate ipt_REJECT nf_reject_ipv4 snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq mac80211 nf_log_ipv4 nf_log_common snd_seq_device joydev input_leds serio_raw snd_timer xt_LOG snd intel_rapl_perf cfg80211 lpc_ich xt_multiport snd_soc_sst_acpi soundcore shpchp snd_soc_sst_match mei_me mei spi_pxa2xx_platform elan_i2c xt_limit dw_dmac i2c_designware_platform i2c_designware_core soc_button_array dw_dmac_core xt_tcpudp 8250_dw mac_hid xt_addrtype nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables cuse parport_pc ppdev lp parport autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid amdkfd
[54303.602105]  [<ffffffffb666e9d3>] usb_probe_interface+0x153/0x2f0
[54303.640294]  [<ffffffffb666d354>] usb_register_driver+0x84/0x140
[54314.830064] usb 2-2: USB disconnect, device number 32 

Hors ligne

#4 Le 22/03/2017, à 18:07

tawguyz

Re : manette xbox micromania non reconnu

personne ne sait d'où ça vient alors? smile

Hors ligne