Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.04 LTS
Ubuntu-fr propose des clés USB de Ubuntu et toutes ses « saveurs » ainsi qu'un magnifique t-shirt pour cette toute nouvelle version d'Ubuntu !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 21/11/2015, à 22:44

mattis

Emuler un disque dur Mac sur ubuntu

Bonjour à tous, j'ai extrait un disque dur d'un Mac, j'aimerais l'emuler sur ubuntu.
Est ce possible ?

Faire une emulation de ce disque dur pour emuler mac sous ubuntu, afin de recuperer des données.

Merci de votre aide.

Hors ligne

#2 Le 22/11/2015, à 01:59

Bougron

Re : Emuler un disque dur Mac sur ubuntu

Bonsoir
Je pense que le logiciel est déjà intégré dans ubuntu  https://forum.ubuntu-fr.org/viewtopic.php?id=140139


Ubuntu  BASH 16.04.1 sous windows10  et ubuntu-17.04-beta2 avec le noyau 4.10.0-13 et la future 17.10 depuis le 10 juillet avec le noyau 4.10.0-26
Lubuntu 14.04.4 en 32 bits  et  Lubuntu 16.06.3 en 32 bits noyau 4.10.0-33 pour un vaio pcg-k215s
Ubuntu 16.04.2 avec le noyau 4.4.0-71 et  le noyau 4.8.0.36
Faites votre  auto-dépannage en lisant  https://doc.ubuntu-fr.org/diagnostic.

Hors ligne

#3 Le 29/11/2015, à 18:14

mattis

Re : Emuler un disque dur Mac sur ubuntu

Bonjour, j'ai essayer cette méthode, j'ai bien mon disque qui monte, mais je n'arrive pas à changer les droits ensuite, la commande
sudo chmod -Rv 777 DESTINATION


me renvois une longue série de  :

impossible de modifier le mode de «/media/gorzak/Macintosh HD1/usr/X11R6/lib/X11/fonts/Type1/fonts.scale» de 0644 (rw-r--r--) en 0777 (rwxrwxrwx)
ni le lien symbolique «/media/gorzak/Macintosh HD1/var» ni la référence n'ont été modifiés.
chmod: modification des permissions de «/media/gorzak/Macintosh HD1/Volumes»: Système de fichiers accessible en lecture seulement
impossible de modifier le mode de «/media/gorzak/Macintosh HD1/Volumes» de 1777 (rwxrwxrwt) en 0777 (rwxrwxrwx)
ni le lien symbolique «/media/gorzak/Macintosh HD1/Volumes/Macintosh HD» ni la référence n'ont été modifiés.

Merci de votre aide

Hors ligne

#4 Le 29/11/2015, à 18:52

Bougron

Re : Emuler un disque dur Mac sur ubuntu

Bonjour

La cause est là
chmod: modification des permissions de «/media/gorzak/Macintosh HD1/Volumes»: Système de fichiers accessible en lecture seulement

On va essayer de récupérer cette cause en faisant la commande

dmesg |  tail -300

Dont tu posteras le résultat.


Ubuntu  BASH 16.04.1 sous windows10  et ubuntu-17.04-beta2 avec le noyau 4.10.0-13 et la future 17.10 depuis le 10 juillet avec le noyau 4.10.0-26
Lubuntu 14.04.4 en 32 bits  et  Lubuntu 16.06.3 en 32 bits noyau 4.10.0-33 pour un vaio pcg-k215s
Ubuntu 16.04.2 avec le noyau 4.4.0-71 et  le noyau 4.8.0.36
Faites votre  auto-dépannage en lisant  https://doc.ubuntu-fr.org/diagnostic.

Hors ligne

#5 Le 29/11/2015, à 19:05

mattis

Re : Emuler un disque dur Mac sur ubuntu

[    1.645775] usb 1-1: New USB device found, idVendor=050d, idProduct=1102
[    1.645784] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.645789] usb 1-1: Product: 802.11n WLAN Adapter
[    1.645792] usb 1-1: Manufacturer: Realtek
[    1.645795] usb 1-1: SerialNumber: 00e04c000001
[    1.656485] ata3.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
[    1.672353] ata3.00: configured for UDMA/33
[    1.688043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.776025] tsc: Refined TSC clocksource calibration: 1599.817 MHz
[    1.812022] usb 1-5: new high-speed USB device number 4 using ehci-pci
[    1.900767] ata1.00: ATA-7: MAXTOR STM380215AS, 4.AAB, max UDMA/133
[    1.900774] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.922218] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    1.945867] usb 1-5: New USB device found, idVendor=04a9, idProduct=1752
[    1.945872] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.945875] usb 1-5: Product: MG3100 series
[    1.945878] usb 1-5: Manufacturer: Canon
[    1.945882] usb 1-5: SerialNumber: B2AE6F
[    1.967418] ata1.00: configured for UDMA/133
[    1.967636] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM380215 4.AA PQ: 0 ANSI: 5
[    1.968057] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.968135] sd 0:0:0:0: [sda] Write Protect is off
[    1.968139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.968172] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.968490] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.035757]  sda: sda1 sda2 < sda5 sda6 >
[    2.036359] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.056029] usb 1-7: new high-speed USB device number 5 using ehci-pci
[    2.172023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.202359] usb 1-7: New USB device found, idVendor=058f, idProduct=6362
[    2.202363] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.202367] usb 1-7: Product: Mass Storage Device
[    2.202370] usb 1-7: Manufacturer: Generic
[    2.202373] usb 1-7: SerialNumber: 058F312D81B
[    2.220579] usb-storage 1-7:1.0: USB Mass Storage device detected
[    2.220704] scsi4 : usb-storage 1-7:1.0
[    2.221294] usbcore: registered new interface driver usb-storage
[    2.392677] ata2.00: ATA-6: ST380013AS, 5.06, max UDMA/133
[    2.392685] ata2.00: 156301488 sectors, multi 1: LBA48 
[    2.408650] ata2.00: configured for UDMA/133
[    2.408842] scsi 1:0:0:0: Direct-Access     ATA      ST380013AS       5.06 PQ: 0 ANSI: 5
[    2.409181] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.409259] sd 1:0:0:0: [sdb] Write Protect is off
[    2.409264] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.409297] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.409742] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.411330] scsi 2:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.05 PQ: 0 ANSI: 5
[    2.413011] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.413019] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.413215] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.413404] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.416768]  sdb: [mac] sdb1 sdb2 sdb3 sdb4
[    2.417334] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.440028] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.611602] usb 3-2: New USB device found, idVendor=04f3, idProduct=0210
[    2.611611] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.611615] usb 3-2: Product: PS/2+USB Mouse
[    2.635612] hidraw: raw HID events driver (C) Jiri Kosina
[    2.662406] usbcore: registered new interface driver usbhid
[    2.662412] usbhid: USB HID core driver
[    2.671636] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input5
[    2.674978] hid-generic 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:10.1-2/input0
[    2.676627] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    2.779263] Switched to clocksource tsc
[    3.220862] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    3.221467] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    3.222089] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    3.222587] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    3.223009] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.223283] sd 4:0:0:1: Attached scsi generic sg4 type 0
[    3.223536] sd 4:0:0:2: Attached scsi generic sg5 type 0
[    3.224175] sd 4:0:0:3: Attached scsi generic sg6 type 0
[    3.230501] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    3.231253] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    3.232003] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    3.232868] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    3.620746] random: nonblocking pool is initialized
[    3.878311] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    3.878320] EXT4-fs (sda1): write access will be enabled during recovery
[    5.672178] EXT4-fs (sda1): orphan cleanup on readonly fs
[    5.672386] EXT4-fs (sda1): 3 orphan inodes deleted
[    5.672390] EXT4-fs (sda1): recovery complete
[    5.838031] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.617808] init: plymouth-upstart-bridge main process (153) terminated with status 1
[    7.617837] init: plymouth-upstart-bridge main process ended, respawning
[    7.628212] init: plymouth-upstart-bridge main process (164) terminated with status 1
[    7.628242] init: plymouth-upstart-bridge main process ended, respawning
[    7.638214] init: plymouth-upstart-bridge main process (166) terminated with status 1
[    7.638240] init: plymouth-upstart-bridge main process ended, respawning
[    7.650553] init: plymouth-upstart-bridge main process (168) terminated with status 1
[    7.650580] init: plymouth-upstart-bridge main process ended, respawning
[    7.665746] init: plymouth-upstart-bridge main process (170) terminated with status 1
[    7.665773] init: plymouth-upstart-bridge main process ended, respawning
[    7.675222] init: plymouth-upstart-bridge main process (173) terminated with status 1
[    7.675252] init: plymouth-upstart-bridge main process ended, respawning
[    7.684289] init: plymouth-upstart-bridge main process (175) terminated with status 1
[    7.684315] init: plymouth-upstart-bridge main process ended, respawning
[    7.693452] init: plymouth-upstart-bridge main process (177) terminated with status 1
[    7.693480] init: plymouth-upstart-bridge main process ended, respawning
[    7.702378] init: plymouth-upstart-bridge main process (179) terminated with status 1
[    7.702405] init: plymouth-upstart-bridge main process ended, respawning
[    7.712419] init: plymouth-upstart-bridge main process (181) terminated with status 1
[    7.712445] init: plymouth-upstart-bridge main process ended, respawning
[    7.722591] init: plymouth-upstart-bridge main process (184) terminated with status 1
[    7.722616] init: plymouth-upstart-bridge respawning too fast, stopped
[   24.675714] Adding 1047548k swap on /dev/sda5.  Priority:-1 extents:1 across:1047548k FS
[   24.873551] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.158918] systemd-udevd[287]: starting version 204
[   25.472790] lp: driver loaded but no devices found
[   25.596868] ppdev: user-space parallel port driver
[   25.622604] parport_pc 00:0a: reported by Plug and Play ACPI
[   25.622663] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   25.716768] lp0: using parport0 (interrupt-driven).
[   25.830270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   26.044395] [drm] Initialized drm 1.1.0 20060810
[   26.047857] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   26.368260] wmi: Mapper loaded
[   26.579808] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   26.579816] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   26.579860] Console: switching to colour dummy device 80x25
[   26.583940] [drm] hdmi device  not found 1 0 1
[   26.584116] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x043000a4
[   26.584121] nouveau  [  DEVICE][0000:01:00.0] Chipset: NV43 (NV43)
[   26.584124] nouveau  [  DEVICE][0000:01:00.0] Family : NV40
[   26.585264] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   26.762627] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   26.762634] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[   26.762901] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   26.762907] nouveau  [   VBIOS][0000:01:00.0] version 05.43.02.66.00
[   26.805684] type=1400 audit(1448813351.011:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=407 comm="apparmor_parser"
[   26.805700] type=1400 audit(1448813351.011:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
[   26.805709] type=1400 audit(1448813351.011:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
[   26.806615] type=1400 audit(1448813351.011:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
[   26.806629] type=1400 audit(1448813351.011:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
[   26.807067] type=1400 audit(1448813351.011:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
[   26.849936] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR3
[   26.849944] nouveau  [     PFB][0000:01:00.0] RAM size: 128 MiB
[   26.849947] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 378880 tags
[   26.953849] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 1300000uv
[   26.995604] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.032816] WARNING! power/level is deprecated; use power/control instead
[   27.050535] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   27.194753] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   27.327157] nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
[   27.327185] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   27.327191] nouveau  [  PTHERM][0000:01:00.0] internal sensor: no
[   27.347194] nouveau  [     CLK][0000:01:00.0] 20: core 300 MHz shader 300 MHz memory 900 MHz
[   27.347204] nouveau  [     CLK][0000:01:00.0] 21: core 500 MHz shader 500 MHz memory 900 MHz
[   27.347223] nouveau  [     CLK][0000:01:00.0] --: core 100 MHz shader 100 MHz memory 598 MHz
[   27.347279] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[   27.347294] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[   27.347301] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[   27.347363] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[   27.354001] [TTM] Zone  kernel: Available graphics memory: 442848 kiB
[   27.354008] [TTM] Zone highmem: Available graphics memory: 772548 kiB
[   27.354011] [TTM] Initializing pool allocator
[   27.354018] [TTM] Initializing DMA pool allocator
[   27.354045] nouveau  [     DRM] VRAM: 124 MiB
[   27.354048] nouveau  [     DRM] GART: 128 MiB
[   27.354057] nouveau  [     DRM] TMDS table version 1.1
[   27.354061] nouveau  [     DRM] DCB version 3.0
[   27.354066] nouveau  [     DRM] DCB outp 00: 01000300 00000028
[   27.354070] nouveau  [     DRM] DCB outp 01: 04011312 00000000
[   27.354074] nouveau  [     DRM] DCB outp 02: 04011310 00000028
[   27.354077] nouveau  [     DRM] DCB outp 03: 020223f1 0004c080
[   27.354081] nouveau  [     DRM] DCB conn 00: 0000
[   27.354085] nouveau  [     DRM] DCB conn 01: 2130
[   27.354088] nouveau  [     DRM] DCB conn 02: 0210
[   27.354091] nouveau  [     DRM] DCB conn 03: 0211
[   27.354094] nouveau  [     DRM] DCB conn 04: 0213
[   27.384511] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   27.384522] [drm] No driver support for vblank timestamp query.
[   27.384597] nouveau  [     DRM] 0xD576: Parsing digital output script table
[   27.503694] nouveau  [     DRM] MM: using M2MF for buffer copies
[   27.503715] nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
[   27.696090] nouveau  [     DRM] Load detected on output B
[   27.696652] nouveau  [     DRM] allocated 1440x900 fb: 0x9000, bo e2421600
[   27.699682] fbcon: nouveaufb (fb0) is primary device
[   27.843729] nouveau  [     DRM] Setting dpms mode 0 on TV encoder (output 3)
[   27.843745] nouveau  [     DRM] Output TV-1 is running on CRTC 1 using output B
[   27.877885] Console: switching to colour frame buffer device 90x36
[   27.878480] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   27.878482] nouveau 0000:01:00.0: registered panic notifier
[   27.891594] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[   28.345899] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   29.497178] cfg80211: Calling CRDA to update world regulatory domain
[   29.996070] nouveau  [     DRM] Load detected on output B
[   30.236442] rtl8192cu: Chip version 0x10
[   30.351306] rtl8192cu: MAC address: 08:86:3b:6a:c0:1f
[   30.351319] rtl8192cu: Board Type 0
[   30.351549] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   30.351614] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   30.354397] usbcore: registered new interface driver rtl8192cu
[   30.506403] cfg80211: World regulatory domain updated:
[   30.506414] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   30.506418] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.506422] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.506425] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   30.506427] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.506430] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.955464] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   30.961316] rtlwifi: wireless switch is on
[   31.403580] usblp 1-5:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1752
[   31.406172] usbcore: registered new interface driver usblp
[   34.724144] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   36.392245] init: failsafe main process (817) killed by TERM signal
[   37.383913] Bluetooth: Core ver 2.17
[   37.383986] NET: Registered protocol family 31
[   37.383989] Bluetooth: HCI device and connection manager initialized
[   37.411776] Bluetooth: HCI socket layer initialized
[   37.411789] Bluetooth: L2CAP socket layer initialized
[   37.411810] Bluetooth: SCO socket layer initialized
[   37.478929] Bluetooth: RFCOMM TTY layer initialized
[   37.478954] Bluetooth: RFCOMM socket layer initialized
[   37.478979] Bluetooth: RFCOMM ver 1.11
[   37.480287] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.480294] Bluetooth: BNEP filters: protocol multicast
[   37.480314] Bluetooth: BNEP socket layer initialized
[   37.627020] type=1400 audit(1448813361.831:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=956 comm="apparmor_parser"
[   37.627041] type=1400 audit(1448813361.831:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=956 comm="apparmor_parser"
[   37.627941] type=1400 audit(1448813361.831:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=956 comm="apparmor_parser"
[   38.036209] type=1400 audit(1448813362.243:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1010 comm="apparmor_parser"
[   38.036227] type=1400 audit(1448813362.243:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1010 comm="apparmor_parser"
[   38.036778] type=1400 audit(1448813362.243:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=1010 comm="apparmor_parser"
[   38.044794] type=1400 audit(1448813362.251:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1011 comm="apparmor_parser"
[   38.044815] type=1400 audit(1448813362.251:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
[   38.044823] type=1400 audit(1448813362.251:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
[   38.045728] type=1400 audit(1448813362.251:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
[   38.161090] init: cups main process (961) killed by HUP signal
[   38.161119] init: cups main process ended, respawning
[   39.068101] rtl8192cu: MAC auto ON okay!
[   39.115275] rtl8192cu: Tx queue select: 0x05
[   39.593897] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.594850] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.631616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   39.635384] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   40.267669] init: samba-ad-dc main process (1039) terminated with status 1
[   41.493278] wlan0: authenticate with 00:24:d4:97:7f:e4
[   41.562489] wlan0: send auth to 00:24:d4:97:7f:e4 (try 1/3)
[   41.566869] wlan0: authenticated
[   41.572078] wlan0: associate with 00:24:d4:97:7f:e4 (try 1/3)
[   41.577077] wlan0: RX AssocResp from 00:24:d4:97:7f:e4 (capab=0x411 status=0 aid=2)
[   41.577147] wlan0: associated
[   41.577222] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   42.101590] wlan0: deauthenticating from 00:24:d4:97:7f:e4 by local choice (reason=2)
[   42.102727] cfg80211: Calling CRDA to update world regulatory domain
[   42.106844] wlan0: authenticate with 00:24:d4:97:7f:e4
[   42.108762] wlan0: send auth to 00:24:d4:97:7f:e4 (try 1/3)
[   42.119597] cfg80211: World regulatory domain updated:
[   42.119608] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   42.119612] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   42.119616] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   42.119618] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   42.119621] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   42.119624] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   42.121099] wlan0: authenticated
[   42.124732] wlan0: associate with 00:24:d4:97:7f:e4 (try 1/3)
[   42.147975] wlan0: RX AssocResp from 00:24:d4:97:7f:e4 (capab=0x411 status=0 aid=2)
[   42.148050] wlan0: associated
[   43.879724] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37861 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[   45.630378] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   46.056886] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37862 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[   47.646994] Non-volatile memory driver v1.3
[   47.653872] nouveau  [     DRM] Load detected on output B
[   49.468074] nouveau  [     DRM] Load detected on output B
[   49.632119] nouveau  [     DRM] Load detected on output B
[   50.040276] nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
[   50.066239] nouveau  [     DRM] Setting dpms mode 0 on TV encoder (output 3)
[   50.066266] nouveau  [     DRM] Output TV-1 is running on CRTC 1 using output B
[   50.432188] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37863 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[   55.788082] nouveau  [     DRM] Load detected on output B
[   57.196083] nouveau  [     DRM] Load detected on output B
[   58.392091] nouveau  [     DRM] Load detected on output B
[   59.152219] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37864 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[   68.125911] audit_printk_skb: 93 callbacks suppressed
[   68.125922] type=1400 audit(1448813395.133:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2385 comm="apparmor_parser"
[   68.125941] type=1400 audit(1448813395.133:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2385 comm="apparmor_parser"
[   68.132113] type=1400 audit(1448813395.141:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2385 comm="apparmor_parser"
[   76.607832] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37865 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[   79.777855] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=192.168.0.254 DST=192.168.0.14 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=13206 DF PROTO=UDP SPT=1900 DPT=60725 LEN=238 
[   79.778678] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=192.168.0.254 DST=192.168.0.14 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=13207 DF PROTO=UDP SPT=1900 DPT=1900 LEN=238 
[   79.779423] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=192.168.0.254 DST=192.168.0.14 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=13208 DF PROTO=UDP SPT=1900 DPT=1900 LEN=238 
[   79.839096] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=192.168.0.254 DST=192.168.0.14 LEN=362 TOS=0x00 PREC=0x00 TTL=64 ID=13211 DF PROTO=UDP SPT=1900 DPT=1900 LEN=342 
[   79.984123] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:f4:ca:e5:61:f4:e0:08:00 SRC=192.168.0.28 DST=192.168.0.14 LEN=295 TOS=0x00 PREC=0x00 TTL=64 ID=38691 DF PROTO=UDP SPT=1900 DPT=60725 LEN=275 
[   79.987464] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:f4:ca:e5:61:f4:e0:08:00 SRC=192.168.0.28 DST=192.168.0.14 LEN=359 TOS=0x00 PREC=0x00 TTL=64 ID=38692 DF PROTO=UDP SPT=1900 DPT=1900 LEN=339 
[   83.911458] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=192.168.0.254 DST=192.168.0.14 LEN=305 TOS=0x00 PREC=0x00 TTL=64 ID=13271 DF PROTO=UDP SPT=1900 DPT=1900 LEN=285 
[   87.130822] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
[  111.552687] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37866 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[  181.314727] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37867 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[  301.639794] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37868 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[  421.966538] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37869 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[  542.272470] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37870 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[  662.605811] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37871 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[  782.906641] [UFW BLOCK] IN=wlan0 OUT= MAC=08:86:3b:6a:c0:1f:00:24:d4:a0:4e:51:08:00 SRC=178.62.108.151 DST=192.168.0.14 LEN=595 TOS=0x00 PREC=0x00 TTL=50 ID=37872 DF PROTO=TCP SPT=443 DPT=50942 WINDOW=185 RES=0x00 ACK PSH URGP=0 
[ 1984.242989] nouveau  [     DRM] Setting dpms mode 1 on TV encoder (output 3)
[ 2284.258126] nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 2673.880165] nouveau  [     DRM] Setting dpms mode 0 on TV encoder (output 3)
[ 3273.891514] nouveau  [     DRM] Setting dpms mode 1 on TV encoder (output 3)
[ 3275.127228] nouveau  [     DRM] Setting dpms mode 0 on TV encoder (output 3)
[ 3341.201392] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.

Hors ligne

#6 Le 29/11/2015, à 20:04

Bougron

Re : Emuler un disque dur Mac sur ubuntu

la cause est indiquée

[ 3341.201392] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.

Il y a eu un mauvais démontage du disque    de l'autre machine

Les commandes devraient être   (Je viens d'ajouter sudo apt-get install hfsprogs !!!!!)

sudo umount  /dev/sdX
sudo apt-get install hfsprogs
sudo fsck.hfsplus  -f   /dev/sdXN

avec X à la bonne valeur  certainement  b
avec N à la bonne valeur  certainement 1

Dernière modification par Bougron (Le 29/11/2015, à 22:10)


Ubuntu  BASH 16.04.1 sous windows10  et ubuntu-17.04-beta2 avec le noyau 4.10.0-13 et la future 17.10 depuis le 10 juillet avec le noyau 4.10.0-26
Lubuntu 14.04.4 en 32 bits  et  Lubuntu 16.06.3 en 32 bits noyau 4.10.0-33 pour un vaio pcg-k215s
Ubuntu 16.04.2 avec le noyau 4.4.0-71 et  le noyau 4.8.0.36
Faites votre  auto-dépannage en lisant  https://doc.ubuntu-fr.org/diagnostic.

Hors ligne

#7 Le 29/11/2015, à 21:20

mattis

Re : Emuler un disque dur Mac sur ubuntu

Je n'y arrive pas, voilà ce que ça me retourne, merci de ton aide

gorzak@Flash:~$ sudo umount /dev/sdb
umount : /dev/sdb : n'est pas monté
gorzak@Flash:~$ sudo fsck.hfsplus -fv /dev/sdb
sudo: fsck.hfsplus: command not found
gorzak@Flash:~$ sudo fsck.hfsplus -fv /dev/sdb1
sudo: fsck.hfsplus: command not found
gorzak@Flash:~$ 

Hors ligne

#8 Le 29/11/2015, à 22:07

Bougron

Re : Emuler un disque dur Mac sur ubuntu

Désolé
fais

sudo umount  /dev/sdX
sudo apt-get install hfsprogs
sudo fsck.hfsplus  -f   /dev/sdXN

Dernière modification par Bougron (Le 29/11/2015, à 22:10)


Ubuntu  BASH 16.04.1 sous windows10  et ubuntu-17.04-beta2 avec le noyau 4.10.0-13 et la future 17.10 depuis le 10 juillet avec le noyau 4.10.0-26
Lubuntu 14.04.4 en 32 bits  et  Lubuntu 16.06.3 en 32 bits noyau 4.10.0-33 pour un vaio pcg-k215s
Ubuntu 16.04.2 avec le noyau 4.4.0-71 et  le noyau 4.8.0.36
Faites votre  auto-dépannage en lisant  https://doc.ubuntu-fr.org/diagnostic.

Hors ligne