Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/04/2015, à 07:59

ZEPITCH

dernier espoir avant mise au rebut-pb CG nvidia gtx 260m

Bonjour à toutes et tous,
J'ai installé UBUNTU version 12.04 jusqu'à 14.10 actuel avec toujours le même souci entraînant une réinstallation complète de chaque distribution.
Mon portable est un packard bell de 2008 Ipower gx intel core 2 quad core monté en dual boot avec fenetre7 ( deux changement de hdd depuis l'achat) 4 gb de memoire et le gros souci ,la cg nvidia gtx 260m.
Dans chaque cas, l’écran finit au bout d'un temps aléatoire, entre deux jours et six mois, par freezer et écran noir impossible à rectifier donc réinstallation.
Aucun pilote proprio n'est supporté y compris celui ci:NVIDIA-Linux-x86_64-340.32.run
Cela devient difficile car tout ce que je souhaite faire c'est musique et films, j'ai cessé d'essayer de faire tourner sketchup sous wine depuis longtemps, ceci freezant encore plus l'écran.
Si quelqu'un avait une idée pour prolonger la durée de vie de cet objet qui me sert en déplacement, ce serait plus que merveilleux.
Je n'ai pas de fichier dans x11 mais un Xorg0.log et un old aussi dans var:
merci de m'aider et je vous souhaite une bonne journée en attendant
Cordialement
[    20.146]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    20.146] X Protocol Version 11, Revision 0
[    20.146] Build Operating System: Linux 3.2.0-76-generic x86_64 Ubuntu
[    20.146] Current Operating System: Linux pitch-iPower-GX 3.13.0-49-generic #83-Ubuntu SMP Fri Apr 10 20:11:33 UTC 2015 x86_64
[    20.146] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-49-generic root=UUID=5e5fc5d1-8ebb-43a9-b2ef-192834a15e73 ro quiet splash vt.handoff=7
[    20.146] Build Date: 12 February 2015  02:49:29PM
[    20.146] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
[    20.146] Current version of pixman: 0.30.2
[    20.147]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    20.147] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.147] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 08:41:30 2015
[    20.163] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.163] (==) No Layout section.  Using the first Screen section.
[    20.163] (==) No screen section available. Using defaults.
[    20.163] (**) |-->Screen "Default Screen Section" (0)
[    20.163] (**) |   |-->Monitor "<default monitor>"
[    20.163] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    20.164] (==) Automatically adding devices
[    20.164] (==) Automatically enabling devices
[    20.164] (==) Automatically adding GPU devices
[    20.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.164]     Entry deleted from font path.
[    20.164] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.164]     Entry deleted from font path.
[    20.164] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.164]     Entry deleted from font path.
[    20.164] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.164]     Entry deleted from font path.
[    20.164] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.164]     Entry deleted from font path.
[    20.164] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    20.164] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.164] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.164] (II) Loader magic: 0x7f2afb5d6d40
[    20.164] (II) Module ABI versions:
[    20.164]     X.Org ANSI C Emulation: 0.4
[    20.164]     X.Org Video Driver: 15.0
[    20.164]     X.Org XInput driver : 20.0
[    20.164]     X.Org Server Extension : 8.0
[    20.164] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.166] (--) PCI:*(0:1:0:0) 10de:0618:1025:028e rev 162, Mem @ 0xf2000000/16777216, 0xd0000000/268435456, 0xf0000000/33554432, I/O @ 0x00002000/128
[    20.167] Initializing built-in extension Generic Event Extension
[    20.167] Initializing built-in extension SHAPE
[    20.167] Initializing built-in extension MIT-SHM
[    20.167] Initializing built-in extension XInputExtension
[    20.167] Initializing built-in extension XTEST
[    20.167] Initializing built-in extension BIG-REQUESTS
[    20.167] Initializing built-in extension SYNC
[    20.167] Initializing built-in extension XKEYBOARD
[    20.167] Initializing built-in extension XC-MISC
[    20.167] Initializing built-in extension SECURITY
[    20.167] Initializing built-in extension XINERAMA
[    20.167] Initializing built-in extension XFIXES
[    20.167] Initializing built-in extension RENDER
[    20.167] Initializing built-in extension RANDR
[    20.167] Initializing built-in extension COMPOSITE
[    20.167] Initializing built-in extension DAMAGE
[    20.167] Initializing built-in extension MIT-SCREEN-SAVER
[    20.167] Initializing built-in extension DOUBLE-BUFFER
[    20.167] Initializing built-in extension RECORD
[    20.167] Initializing built-in extension DPMS
[    20.167] Initializing built-in extension Present
[    20.167] Initializing built-in extension DRI3
[    20.167] Initializing built-in extension X-Resource
[    20.167] Initializing built-in extension XVideo
[    20.167] Initializing built-in extension XVideo-MotionCompensation
[    20.167] Initializing built-in extension SELinux
[    20.167] Initializing built-in extension XFree86-VidModeExtension
[    20.167] Initializing built-in extension XFree86-DGA
[    20.167] Initializing built-in extension XFree86-DRI
[    20.167] Initializing built-in extension DRI2
[    20.167] (II) LoadModule: "glx"
[    20.178] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.266] (II) Module glx: vendor="X.Org Foundation"
[    20.266]     compiled for 1.15.1, module version = 1.0.0
[    20.266]     ABI class: X.Org Server Extension, version 8.0
[    20.266] (==) AIGLX enabled
[    20.266] Loading extension GLX
[    20.266] (==) Matched nvidia as autoconfigured driver 0
[    20.266] (==) Matched nouveau as autoconfigured driver 1
[    20.266] (==) Matched nvidia as autoconfigured driver 2
[    20.266] (==) Matched nouveau as autoconfigured driver 3
[    20.266] (==) Matched modesetting as autoconfigured driver 4
[    20.266] (==) Matched fbdev as autoconfigured driver 5
[    20.266] (==) Matched vesa as autoconfigured driver 6
[    20.266] (==) Assigned the driver to the xf86ConfigLayout
[    20.266] (II) LoadModule: "nvidia"
[    20.266] (WW) Warning, couldn't open module nvidia
[    20.266] (II) UnloadModule: "nvidia"
[    20.266] (II) Unloading nvidia
[    20.267] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    20.267] (II) LoadModule: "nouveau"
[    20.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.276] (II) Module nouveau: vendor="X.Org Foundation"
[    20.276]     compiled for 1.15.0, module version = 1.0.10
[    20.276]     Module class: X.Org Video Driver
[    20.276]     ABI class: X.Org Video Driver, version 15.0
[    20.276] (II) LoadModule: "modesetting"
[    20.276] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.276] (II) Module modesetting: vendor="X.Org Foundation"
[    20.276]     compiled for 1.15.0, module version = 0.8.1
[    20.276]     Module class: X.Org Video Driver
[    20.276]     ABI class: X.Org Video Driver, version 15.0
[    20.276] (II) LoadModule: "fbdev"
[    20.276] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.276] (II) Module fbdev: vendor="X.Org Foundation"
[    20.276]     compiled for 1.15.0, module version = 0.4.4
[    20.276]     Module class: X.Org Video Driver
[    20.276]     ABI class: X.Org Video Driver, version 15.0
[    20.276] (II) LoadModule: "vesa"
[    20.277] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.277] (II) Module vesa: vendor="X.Org Foundation"
[    20.277]     compiled for 1.15.0, module version = 2.3.3
[    20.277]     Module class: X.Org Video Driver
[    20.277]     ABI class: X.Org Video Driver, version 15.0
[    20.277] (==) Matched nvidia as autoconfigured driver 0
[    20.277] (==) Matched nouveau as autoconfigured driver 1
[    20.277] (==) Matched nvidia as autoconfigured driver 2
[    20.277] (==) Matched nouveau as autoconfigured driver 3
[    20.277] (==) Matched modesetting as autoconfigured driver 4
[    20.277] (==) Matched fbdev as autoconfigured driver 5
[    20.277] (==) Matched vesa as autoconfigured driver 6
[    20.277] (==) Assigned the driver to the xf86ConfigLayout
[    20.277] (II) LoadModule: "nvidia"
[    20.277] (WW) Warning, couldn't open module nvidia
[    20.277] (II) UnloadModule: "nvidia"
[    20.277] (II) Unloading nvidia
[    20.278] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    20.278] (II) LoadModule: "nouveau"
[    20.278] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.278] (II) Module nouveau: vendor="X.Org Foundation"
[    20.278]     compiled for 1.15.0, module version = 1.0.10
[    20.278]     Module class: X.Org Video Driver
[    20.278]     ABI class: X.Org Video Driver, version 15.0
[    20.278] (II) UnloadModule: "nouveau"
[    20.278] (II) Unloading nouveau
[    20.278] (II) Failed to load module "nouveau" (already loaded, 0)
[    20.278] (II) LoadModule: "modesetting"
[    20.278] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.278] (II) Module modesetting: vendor="X.Org Foundation"
[    20.278]     compiled for 1.15.0, module version = 0.8.1
[    20.278]     Module class: X.Org Video Driver
[    20.278]     ABI class: X.Org Video Driver, version 15.0
[    20.278] (II) UnloadModule: "modesetting"
[    20.278] (II) Unloading modesetting
[    20.278] (II) Failed to load module "modesetting" (already loaded, 0)
[    20.278] (II) LoadModule: "fbdev"
[    20.278] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.278] (II) Module fbdev: vendor="X.Org Foundation"
[    20.279]     compiled for 1.15.0, module version = 0.4.4
[    20.279]     Module class: X.Org Video Driver
[    20.279]     ABI class: X.Org Video Driver, version 15.0
[    20.279] (II) UnloadModule: "fbdev"
[    20.279] (II) Unloading fbdev
[    20.279] (II) Failed to load module "fbdev" (already loaded, 0)
[    20.279] (II) LoadModule: "vesa"
[    20.279] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.279] (II) Module vesa: vendor="X.Org Foundation"
[    20.279]     compiled for 1.15.0, module version = 2.3.3
[    20.279]     Module class: X.Org Video Driver
[    20.279]     ABI class: X.Org Video Driver, version 15.0
[    20.279] (II) UnloadModule: "vesa"
[    20.279] (II) Unloading vesa
[    20.279] (II) Failed to load module "vesa" (already loaded, 0)
[    20.279] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    20.279] (II) NOUVEAU driver for NVIDIA chipset families :
[    20.279]     RIVA TNT        (NV04)
[    20.279]     RIVA TNT2       (NV05)
[    20.279]     GeForce 256     (NV10)
[    20.279]     GeForce 2       (NV11, NV15)
[    20.279]     GeForce 4MX     (NV17, NV18)
[    20.279]     GeForce 3       (NV20)
[    20.279]     GeForce 4Ti     (NV25, NV28)
[    20.279]     GeForce FX      (NV3x)
[    20.279]     GeForce 6       (NV4x)
[    20.279]     GeForce 7       (G7x)
[    20.279]     GeForce 8       (G8x)
[    20.280]     GeForce GTX 200 (NVA0)
[    20.280]     GeForce GTX 400 (NVC0)
[    20.280] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.280] (II) FBDEV: driver for framebuffer: fbdev
[    20.280] (II) VESA: driver for VESA chipsets: vesa
[    20.280] (++) using VT number 7

[    20.280] (II) [drm] nouveau interface version: 1.1.2
[    20.280] (WW) Falling back to old probe method for modesetting
[    20.280] (WW) Falling back to old probe method for fbdev
[    20.280] (II) Loading sub module "fbdevhw"
[    20.280] (II) LoadModule: "fbdevhw"
[    20.280] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    20.281] (II) Module fbdevhw: vendor="X.Org Foundation"
[    20.281]     compiled for 1.15.1, module version = 0.0.2
[    20.281]     ABI class: X.Org Video Driver, version 15.0
[    20.281] (WW) Falling back to old probe method for vesa
[    20.281] (II) Loading sub module "dri2"
[    20.281] (II) LoadModule: "dri2"
[    20.281] (II) Module "dri2" already built-in
[    20.281] (--) NOUVEAU(0): Chipset: "NVIDIA NV92"
[    20.281] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    20.281] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    20.281] (==) NOUVEAU(0): RGB weight 888
[    20.281] (==) NOUVEAU(0): Default visual is TrueColor
[    20.281] (==) NOUVEAU(0): Using HW cursor
[    20.281] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    20.281] (==) NOUVEAU(0): Page flipping enabled
[    20.281] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    20.330] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[    20.351] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    20.353] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    20.386] (II) NOUVEAU(0): EDID for output LVDS-1
[    20.386] (II) NOUVEAU(0): Manufacturer: AUO  Model: 6287  Serial#: 0
[    20.386] (II) NOUVEAU(0): Year: 2007  Week: 1
[    20.386] (II) NOUVEAU(0): EDID Version: 1.3
[    20.386] (II) NOUVEAU(0): Digital Display Input
[    20.386] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[    20.386] (II) NOUVEAU(0): Gamma: 2.20
[    20.386] (II) NOUVEAU(0): No DPMS capabilities specified
[    20.386] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    20.386] (II) NOUVEAU(0): First detailed timing is preferred mode
[    20.386] (II) NOUVEAU(0): redX: 0.590 redY: 0.345   greenX: 0.315 greenY: 0.555
[    20.386] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    20.386] (II) NOUVEAU(0): Manufacturer's mask: 0
[    20.386] (II) NOUVEAU(0): Supported detailed timing:
[    20.386] (II) NOUVEAU(0): clock: 96.3 MHz   Image Size:  367 x 229 mm
[    20.386] (II) NOUVEAU(0): h_active: 1440  h_sync: 1648  h_sync_end 1680 h_blank_end 1760 h_border: 0
[    20.386] (II) NOUVEAU(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 912 v_border: 0
[    20.386] (II) NOUVEAU(0): Unknown vendor-specific block f
[    20.386] (II) NOUVEAU(0):  AUO
[    20.386] (II) NOUVEAU(0):  B170PW06 V2
[    20.386] (II) NOUVEAU(0): EDID (in hex):
[    20.386] (II) NOUVEAU(0):     00ffffffffffff0006af876200000000
[    20.386] (II) NOUVEAU(0):     01110103802517780a1cf59758508e27
[    20.386] (II) NOUVEAU(0):     27505400000001010101010101010101
[    20.386] (II) NOUVEAU(0):     0101010101019e25a04051840c30d020
[    20.386] (II) NOUVEAU(0):     36006fe5100000180000000f00000000
[    20.386] (II) NOUVEAU(0):     00000000000000000020000000fe0041
[    20.386] (II) NOUVEAU(0):     554f0a200020202020202020000000fe
[    20.386] (II) NOUVEAU(0):     004231373050573036205632200a000b
[    20.386] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[    20.386] (II) NOUVEAU(0): Modeline "1440x900"x60.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)
[    20.386] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.75  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz e)
[    20.386] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[    20.386] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[    20.386] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[    20.386] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[    20.386] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[    20.386] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[    20.407] (II) NOUVEAU(0): EDID for output VGA-1
[    20.409] (II) NOUVEAU(0): EDID for output HDMI-1
[    20.409] (II) NOUVEAU(0): Output LVDS-1 connected
[    20.409] (II) NOUVEAU(0): Output VGA-1 disconnected
[    20.409] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    20.409] (II) NOUVEAU(0): Using exact sizes for initial modes
[    20.409] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1440x900
[    20.409] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.409] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[    20.409] (**) NOUVEAU(0):  Driver mode "1440x900": 96.3 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
[    20.409] (II) NOUVEAU(0): Modeline "1440x900"x60.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)
[    20.409] (**) NOUVEAU(0):  Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[    20.409] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.75  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz e)
[    20.409] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[    20.409] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[    20.409] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[    20.410] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[    20.410] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[    20.410] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[    20.410] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[    20.410] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[    20.410] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[    20.410] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[    20.410] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[    20.410] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[    20.410] (==) NOUVEAU(0): DPI set to (96, 96)
[    20.410] (II) Loading sub module "fb"
[    20.410] (II) LoadModule: "fb"
[    20.410] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.410] (II) Module fb: vendor="X.Org Foundation"
[    20.410]     compiled for 1.15.1, module version = 1.0.0
[    20.410]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.410] (II) Loading sub module "exa"
[    20.410] (II) LoadModule: "exa"
[    20.410] (II) Loading /usr/lib/xorg/modules/libexa.so
[    20.410] (II) Module exa: vendor="X.Org Foundation"
[    20.410]     compiled for 1.15.1, module version = 2.6.0
[    20.410]     ABI class: X.Org Video Driver, version 15.0
[    20.410] (II) Loading sub module "shadowfb"
[    20.410] (II) LoadModule: "shadowfb"
[    20.411] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    20.411] (II) Module shadowfb: vendor="X.Org Foundation"
[    20.411]     compiled for 1.15.1, module version = 1.0.0
[    20.411]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.411] (II) UnloadModule: "modesetting"
[    20.411] (II) Unloading modesetting
[    20.411] (II) UnloadModule: "fbdev"
[    20.411] (II) Unloading fbdev
[    20.411] (II) UnloadSubModule: "fbdevhw"
[    20.411] (II) Unloading fbdevhw
[    20.411] (II) UnloadModule: "vesa"
[    20.411] (II) Unloading vesa
[    20.411] (--) Depth 24 pixmap format is 32 bpp
[    20.412] (II) NOUVEAU(0): Opened GPU channel 0
[    20.418] (II) NOUVEAU(0): [DRI2] Setup complete
[    20.418] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    20.418] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    20.419] (II) EXA(0): Driver allocated offscreen pixmaps
[    20.419] (II) EXA(0): Driver registered support for the following operations:
[    20.419] (II)         Solid
[    20.419] (II)         Copy
[    20.419] (II)         Composite (RENDER acceleration)
[    20.419] (II)         UploadToScreen
[    20.419] (II)         DownloadFromScreen
[    20.419] (==) NOUVEAU(0): Backing store enabled
[    20.419] (==) NOUVEAU(0): Silken mouse enabled
[    20.419] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    20.419] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    20.419] (==) NOUVEAU(0): DPMS enabled
[    20.419] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.419] (--) RandR disabled
[    20.425] (II) SELinux: Disabled on system
[    20.492] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.492] (II) AIGLX: enabled GLX_ARB_create_context
[    20.492] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    20.492] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    20.492] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.492] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.492] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    20.492] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    20.492] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.492] (II) AIGLX: Loaded and initialized nouveau
[    20.492] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.495] (II) NOUVEAU(0): NVEnterVT is called.
[    20.522] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[    20.522] resize called 1440 900
[    20.533] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    20.537] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    20.537] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.537] (II) LoadModule: "evdev"
[    20.537] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.553] (II) Module evdev: vendor="X.Org Foundation"
[    20.553]     compiled for 1.15.0, module version = 2.8.2
[    20.553]     Module class: X.Org XInput Driver
[    20.553]     ABI class: X.Org XInput driver, version 20.0
[    20.553] (II) Using input driver 'evdev' for 'Power Button'
[    20.553] (**) Power Button: always reports core events
[    20.553] (**) evdev: Power Button: Device: "/dev/input/event2"
[    20.553] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.553] (--) evdev: Power Button: Found keys
[    20.553] (II) evdev: Power Button: Configuring as keyboard
[    20.553] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    20.553] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.553] (**) Option "xkb_rules" "evdev"
[    20.553] (**) Option "xkb_model" "pc105"
[    20.553] (**) Option "xkb_layout" "fr"
[    20.553] (**) Option "xkb_variant" "latin9"
[    20.556] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[    20.557] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    20.557] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.557] (II) Using input driver 'evdev' for 'Video Bus'
[    20.557] (**) Video Bus: always reports core events
[    20.557] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    20.557] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    20.557] (--) evdev: Video Bus: Found keys
[    20.557] (II) evdev: Video Bus: Configuring as keyboard
[    20.557] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input12/event5"
[    20.557] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    20.557] (**) Option "xkb_rules" "evdev"
[    20.557] (**) Option "xkb_model" "pc105"
[    20.557] (**) Option "xkb_layout" "fr"
[    20.557] (**) Option "xkb_variant" "latin9"
[    20.558] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    20.558] (II) No input driver specified, ignoring this device.
[    20.558] (II) This device may have been added with another device file.
[    20.558] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    20.558] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.558] (II) Using input driver 'evdev' for 'Sleep Button'
[    20.558] (**) Sleep Button: always reports core events
[    20.558] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    20.558] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    20.558] (--) evdev: Sleep Button: Found keys
[    20.558] (II) evdev: Sleep Button: Configuring as keyboard
[    20.558] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    20.558] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    20.558] (**) Option "xkb_rules" "evdev"
[    20.558] (**) Option "xkb_model" "pc105"
[    20.558] (**) Option "xkb_layout" "fr"
[    20.558] (**) Option "xkb_variant" "latin9"
[    20.559] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    20.559] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    20.559] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event9)
[    20.559] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    20.560] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[    20.560] (**) USB 2.0 Camera: always reports core events
[    20.560] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event9"
[    20.560] (--) evdev: USB 2.0 Camera: Vendor 0x4f2 Product 0xb027
[    20.560] (--) evdev: USB 2.0 Camera: Found keys
[    20.560] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[    20.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input16/event9"
[    20.560] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[    20.560] (**) Option "xkb_rules" "evdev"
[    20.560] (**) Option "xkb_model" "pc105"
[    20.560] (**) Option "xkb_layout" "fr"
[    20.560] (**) Option "xkb_variant" "latin9"
[    20.560] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    20.560] (II) No input driver specified, ignoring this device.
[    20.560] (II) This device may have been added with another device file.
[    20.561] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    20.561] (II) No input driver specified, ignoring this device.
[    20.561] (II) This device may have been added with another device file.
[    20.561] (II) config/udev: Adding input device Primax Kensington Eagle Trackball (/dev/input/event10)
[    20.561] (**) Primax Kensington Eagle Trackball: Applying InputClass "evdev pointer catchall"
[    20.561] (II) Using input driver 'evdev' for 'Primax Kensington Eagle Trackball'
[    20.561] (**) Primax Kensington Eagle Trackball: always reports core events
[    20.561] (**) evdev: Primax Kensington Eagle Trackball: Device: "/dev/input/event10"
[    20.561] (--) evdev: Primax Kensington Eagle Trackball: Vendor 0x47d Product 0x2048
[    20.561] (--) evdev: Primax Kensington Eagle Trackball: Found 3 mouse buttons
[    20.561] (--) evdev: Primax Kensington Eagle Trackball: Found scroll wheel(s)
[    20.561] (--) evdev: Primax Kensington Eagle Trackball: Found relative axes
[    20.561] (--) evdev: Primax Kensington Eagle Trackball: Found x and y relative axes
[    20.561] (--) evdev: Primax Kensington Eagle Trackball: Found absolute axes
[    20.561] (II) evdev: Primax Kensington Eagle Trackball: Forcing absolute x/y axes to exist.
[    20.561] (II) evdev: Primax Kensington Eagle Trackball: Configuring as mouse
[    20.561] (II) evdev: Primax Kensington Eagle Trackball: Adding scrollwheel support
[    20.561] (**) evdev: Primax Kensington Eagle Trackball: YAxisMapping: buttons 4 and 5
[    20.561] (**) evdev: Primax Kensington Eagle Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.562] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input17/event10"
[    20.562] (II) XINPUT: Adding extended input device "Primax Kensington Eagle Trackball" (type: MOUSE, id 10)
[    20.562] (II) evdev: Primax Kensington Eagle Trackball: initialized for relative axes.
[    20.562] (WW) evdev: Primax Kensington Eagle Trackball: ignoring absolute axes.
[    20.562] (**) Primax Kensington Eagle Trackball: (accel) keeping acceleration scheme 1
[    20.562] (**) Primax Kensington Eagle Trackball: (accel) acceleration profile 0
[    20.562] (**) Primax Kensington Eagle Trackball: (accel) acceleration factor: 2.000
[    20.562] (**) Primax Kensington Eagle Trackball: (accel) acceleration threshold: 4
[    20.562] (II) config/udev: Adding input device Primax Kensington Eagle Trackball (/dev/input/mouse1)
[    20.562] (II) No input driver specified, ignoring this device.
[    20.562] (II) This device may have been added with another device file.
[    20.563] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    20.563] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.563] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.563] (**) AT Translated Set 2 keyboard: always reports core events
[    20.563] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    20.563] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.563] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.563] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.563] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    20.563] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    20.563] (**) Option "xkb_rules" "evdev"
[    20.563] (**) Option "xkb_model" "pc105"
[    20.563] (**) Option "xkb_layout" "fr"
[    20.563] (**) Option "xkb_variant" "latin9"
[    20.564] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[    20.564] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    20.564] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    20.564] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    20.564] (II) LoadModule: "synaptics"
[    20.564] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.564] (II) Module synaptics: vendor="X.Org Foundation"
[    20.564]     compiled for 1.15.0, module version = 1.7.4
[    20.564]     Module class: X.Org XInput Driver
[    20.564]     ABI class: X.Org XInput driver, version 20.0
[    20.564] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    20.564] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.564] (**) Option "Device" "/dev/input/event4"
[    20.596] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 65)
[    20.596] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 108)
[    20.596] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    20.596] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    20.596] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
[    20.596] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    20.596] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    20.596] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.608] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event4"
[    20.608] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    20.608] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    20.608] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    20.608] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[    20.608] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    20.608] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    20.608] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    20.608] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    20.608] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    20.608] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    20.608] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    20.611] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
[    20.611] (II) No input driver specified, ignoring this device.
[    20.611] (II) This device may have been added with another device file.
[    20.611] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    20.611] (II) No input driver specified, ignoring this device.
[    20.611] (II) This device may have been added with another device file.
[    24.372] (II) NOUVEAU(0): EDID vendor "AUO", prod id 25223
[    24.372] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    24.372] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)
[    25.073] (II) NOUVEAU(0): EDID vendor "AUO", prod id 25223
[    25.073] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    25.073] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)
[    25.097] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    25.250] resize called 1440 900
[    26.131] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[    26.172] (II) NOUVEAU(0): EDID vendor "AUO", prod id 25223
[    26.172] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    26.172] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)
[    26.241] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[    26.296] (II) NOUVEAU(0): EDID vendor "AUO", prod id 25223
[    26.296] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    26.296] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)
[    26.588] (II) NOUVEAU(0): EDID vendor "AUO", prod id 25223
[    26.588] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    26.588] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)
[    28.866] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[    42.409] (II) NOUVEAU(0): EDID vendor "AUO", prod id 25223
[    42.409] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    42.409] (II) NOUVEAU(0): Modeline "1440x900"x0.0   96.30  1440 1648 1680 1760  900 903 909 912 -hsync -vsync (54.7 kHz eP)

Hors ligne

#2 Le 15/04/2015, à 09:12

Caribou22

Re : dernier espoir avant mise au rebut-pb CG nvidia gtx 260m

Bonjour,
A moins que ce soit une incroyable coïncidence, tu as crée un autre fil à ce sujet ici : http://forum.ubuntu-fr.org/viewtopic.php?id=1820191
Et des réponses ont d'ailleurs été apportées. Dans l'attente de tes retours smile

Hors ligne

#3 Le 15/04/2015, à 09:35

grim7reaper

Re : dernier espoir avant mise au rebut-pb CG nvidia gtx 260m

Doublon. Merci de continuer la discussion ici.

Hors ligne