Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#826 Le 20/01/2015, à 23:08

alca94

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@ Alcatorda

D'ailleurs, pourquoi y a-t'il marqué « amd64 » alors que mon processeur est un Intel I7 ? Avec un chipset graphique Intel donc, et une carte graphique NVIDIA

cela devrait vous donner la réponse
https://fr.wikipedia.org/wiki/AMD64


POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#827 Le 20/01/2015, à 23:15

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@Alcatordia

sudo apt-get purge bumblebee-nvidia nvidia-304 nvidia-331 nvidia-settings
sudo apt-get install bumblebee-nvidia nvidia-346

Reboot, retry, et si ça marche pas, des logs. wink

Hors ligne

#828 Le 21/01/2015, à 01:31

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@ ArchangeGabriel : Le 346 fonctionne maintenant avec bumblebee (ce n'était pas le cas auparavant) et qu'amène-t-il ?

#829 Le 22/01/2015, à 00:44

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Hum, j’oublie toujours ce packaging stupide sous Ubuntu. Donc non, max 337 actuellement, sauf que celui-ci n’est dispo nulle part, donc 331 max, j’essaie de faire en sorte que 340, 343 et 346 soient ajoutés sous peu. Pour les changelogs, va voir sur le site de nvidia.

Du coup Alcatorda remplace 346 par 331 dans mon message.

Hors ligne

#830 Le 22/01/2015, à 04:54

Eccawchkup

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,
Suite à des problèmes graphiques que je n'ai pas su résoudre, j'ai décidé de faire une installation fraîche d'Ubuntu 14.04.1 LTS sur mon PC portable Asus UX50V. Seule la partition /home n'a pas été reformatée.
Ce PC est équipé de la technologie Optimus (2 chipsets graphiques Intel + Nvidia) – le début de cette techno puisque le PC date de 2009. J'ai donc tout naturellement installé Bumblebee en suivant la doc. Ensuite, j'ai parcouru ton topic sur le Forum.
Après différents tests et triturations dans tous les sens, je n'arrive pas à activer le GPU Nvidia. Avec la commande optirun Je tombe systématiquement sur le message d'erreur :

[ 7334.885317] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[ 7334.885372] [ERROR]Aborting because fallback start is disabled.

Ce n'est pas que je tiens particulièrement à lancer ce bousin; j'ai bien conscience que ce PC est trop vieux pour du 3D, mais je voudrais bien savoir pourquoi et où "ça coince"! Et si en plus ça peut aider au test/debug de Blumblebee et à d'autres personnes alors... Alors ton aide serait plus que la bienvenue.
Je précise que c'est mon premier post sur le Forum bien que je sois un habitué d'Ubuntu depuis 2009. Mais jusqu'ici, la doc m'a été amplement suffisante pour résoudre tous les problèmes rencontrés.
Autre chose: je ne suis pas informaticien, alors soit indulgent et cool avec mes éventuels  cafouillages.
Avec mes remerciements anticipés, je termine avec les quelques commandes qui te sont nécessaires à la compréhension du problème:

        Commande :  lsb_release -a

No LSB modules are available. 
Distributor ID:	Ubuntu 
Description:	Ubuntu 14.04.1 LTS 
Release:	14.04 
Codename:	trusty 

        Commande :  uname -r

3.13.0-44-generic
 

         Commande :  lspci -vnn | egrep 'VGA|3D'

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) 
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [GeForce G 105M] [10de:06f1] (rev ff) (prog-if ff) 

        Commande : dpkg -l | egrep "nvidia"

ii  bumblebee-nvidia                                      3.2.1-5                                             amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-331                                            331.113-0ubuntu0.0.4                                amd64        NVIDIA binary driver - version 331.113
ii  nvidia-331-uvm                                        331.113-0ubuntu0.0.4                                amd64        NVIDIA Unified Memory kernel module
ii  nvidia-libopencl1-331                                 331.113-0ubuntu0.0.4                                amd64        NVIDIA OpenCL Driver and ICD Loader library
ii  nvidia-opencl-icd-331                                 331.113-0ubuntu0.0.4                                amd64        NVIDIA OpenCL ICD
ii  nvidia-settings                                       331.20-0ubuntu8                                     amd64        Tool for configuring the NVIDIA graphics driver

        Commande : lsmod | grep nouveau

 (rien en retour de la commande)
adomin@mbi-ux50v:~$

         Commande : glxinfo | head

name of display: :0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_fbconfig_float, GLX_ARB_framebuffer_sRGB, GLX_ARB_multisample, 
    GLX_EXT_create_context_es2_profile, GLX_EXT_framebuffer_sRGB, 
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, 

        Commande :  glxspheres

glxspheres : commande introuvable

         Commande :  glxspheres64

Polygons in scene: 62464
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: Mesa DRI Mobile Intel® GM45 Express Chipset 
42.939189 frames/sec - 38.123130 Mpixels/sec
41.097312 frames/sec - 36.487837 Mpixels/sec

         Commande :  glxgears

Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
304 frames in 5.0 seconds = 60.733 FPS
302 frames in 5.0 seconds = 60.260 FPS
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 2225 requests (2225 known processed) with 0 events remaining.

Commande : optirun glxgears

[ 7334.885317] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[ 7334.885372] [ERROR]Aborting because fallback start is disabled.

J'ai bien entendu modifié et mis à jour (avec sudo update-grub) le fichier /etc/default/grub comme mentionné au Paragraphe 5.9 de la doc Bumblebee. Mais je butte toujours sur le même problème : Impossible d'allumer le GPU Nvidia !

Dernière modification par Eccawchkup (Le 23/01/2015, à 02:02)


PC Portable Asus UX50V - CPU : Intel® Core™2 Solo CPU U3500 @ 1.40GHz - RAM : 3,8 Gio - DD : 149,05 Gio
IGP+GPU --> Technologie Optimus de NVIDIA : IGP : Mobile Intel® GM45 Express Chipset, GPU: NVIDIA G98M [GeForce G 105M]
OS : Ubuntu 14.04.1 LTS (64bits) / Unity (install 20/01/15) - pas de dual boot

Hors ligne

#831 Le 22/01/2015, à 05:06

Eccawchkup

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Re-Bonjour,

Ooops! Erreur de débutant!
Dans message ci-dessus #833, bien sûr,  ne pas tenir compte des balises "["b"]" "["/b"]" qui entourent les commandes Linux. Moi qui croyait avoir de belles commandes bien grasses...


PC Portable Asus UX50V - CPU : Intel® Core™2 Solo CPU U3500 @ 1.40GHz - RAM : 3,8 Gio - DD : 149,05 Gio
IGP+GPU --> Technologie Optimus de NVIDIA : IGP : Mobile Intel® GM45 Express Chipset, GPU: NVIDIA G98M [GeForce G 105M]
OS : Ubuntu 14.04.1 LTS (64bits) / Unity (install 20/01/15) - pas de dual boot

Hors ligne

#832 Le 22/01/2015, à 23:27

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Tu peux éditer tes messages tu sais ? wink

Il faudrait que tu fasses les choses suivantes :

1. Redémarrer
2. optirun glxinfo → copier le résultat ici
3. dmesg → idem
4. Contenu du fichier /var/log/Xorg.8.log

Hors ligne

#833 Le 23/01/2015, à 03:00

Eccawchkup

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,
Merci de prendre en compte ce pb.
Préambule : merci pour le tuyau à propos de l'édition des msgs. J'avais pas vu le bouton "Modifier" en bas à droite. Comme je l'ai écrit, c'était mon 1er post et en plus je n'avais qu'une envie, celle de me pieuter (il était 5h du mat!). Voilà c'est corrigé pour la balises. Qu'est-ce que je fais du post #834: je le supprime (j'ai vu le bouton "Supprimer" yeah!) ou je le laisse tel quel? - Fin du Préambule

Bon alors, j'ai redémarré la machine et lancé les commandes que tu souhaites; voici les résultats :

       Commande :optirun glxinfo

adomin@mbi-ux50v:~$ optirun glxinfo
[  923.995895] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  923.995950] [ERROR]Aborting because fallback start is disabled.
adomin@mbi-ux50v:~$ 

       Commande : dmesg

adomin@mbi-ux50v:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-44-generic (buildd@lamiak) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=9e7a966a-6216-4d4c-9965-820b7dc26574 ro quiet splash rcutree.rcu_idle_gp_delay=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd6ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdd70000-0x00000000bdd7efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bdd7f000-0x00000000bdddffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: ASUSTeK Computer Inc.         UX50V               /UX50V     , BIOS 204     05/15/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0BDE00000 mask FFFE00000 uncachable
[    0.000000]   4 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] reg 3, base: 3038MB, range: 2MB, type UC
[    0.000000] reg 4, base: 3040MB, range: 32MB, type UC
[    0.000000] total RAM covered: 4062M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3038MB, range: 2MB, type UC
[    0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[    0.000000] reg 4, base: 4GB, range: 1GB, type WB
[    0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbdd70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbdd6ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbdbfffff] page 2M
[    0.000000]  [mem 0xbdc00000-0xbdd6ffff] page 4k
[    0.000000] RAMDISK: [mem 0x35b4e000-0x36d9efff]
[    0.000000] ACPI: RSDP 00000000000f93c0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000bdd70100 000094 (v01 _ASUS_ Notebook 20090515 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bdd70290 0000F4 (v03 051509 FACP1632 20090515 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bdd70680 00E06B (v01  UX50V UX50V204 00000204 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bdd7f000 000040
[    0.000000] ACPI: APIC 00000000bdd70390 00005C (v01 051509 APIC1632 20090515 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bdd70430 00003C (v01 051509 OEMMCFG  20090515 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000bdd70470 000176 (v01 _ASUS_ Notebook 20090515 MSFT 00000097)
[    0.000000] ACPI: ECDT 00000000bdd70620 000054 (v01 051509 OEMECDT  20090515 MSFT 00000097)
[    0.000000] ACPI: DBGP 00000000bdd703f0 000034 (v01 051509 DBGP1632 20090515 MSFT 00000097)
[    0.000000] ACPI: BOOT 00000000bdd705f0 000028 (v01 051509 BOOT1632 20090515 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bdd7f040 000071 (v01 051509 OEMB1632 20090515 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bdd7e6f0 000038 (v01 051509 OEMHPET  20090515 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000bdd7f0c0 002024 (v01 051509 GMCHSCI  20090515 MSFT 00000097)
[    0.000000] ACPI: ATKG 00000000bdd914f0 008024 (v01 022008  OEMATKG 20080220 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bdd99520 000206 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000bdd99730 000765 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000bdd99ea0 0002D7 (v01  PmRef   CpuPm1 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00096fff]
[    0.000000]   node   0: [mem 0x00100000-0xbdd6ffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1039622
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3990 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12086 pages used for memmap
[    0.000000]   DMA32 zone: 773488 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdd70000-0xbdd7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdd7f000-0xbdddffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdde0000-0xbddfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbde00000-0xbdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82304 r8192 d24192 u1048576
[    0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1023355
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=9e7a966a-6216-4d4c-9965-820b7dc26574 ro quiet splash rcutree.rcu_idle_gp_delay=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3991272K/4158488K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 167216K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1397.067 MHz processor
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.13 BogoMIPS (lpj=5588268)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004064] Security Framework initialized
[    0.004092] AppArmor: AppArmor initialized
[    0.004095] Yama: becoming mindful.
[    0.004733] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009309] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010421] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010435] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010845] Initializing cgroup subsys memory
[    0.010857] Initializing cgroup subsys devices
[    0.010861] Initializing cgroup subsys freezer
[    0.010864] Initializing cgroup subsys blkio
[    0.010867] Initializing cgroup subsys perf_event
[    0.010872] Initializing cgroup subsys hugetlb
[    0.010912] mce: CPU supports 6 MCE banks
[    0.010922] CPU0: Thermal monitoring handled by SMI
[    0.010934] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.010934] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.010934] tlb_flushall_shift: -1
[    0.027719] ACPI: Core revision 20131115
[    0.038143] ACPI: All ACPI Tables successfully acquired
[    0.040014] ftrace: allocating 28554 entries in 112 pages
[    0.056562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.098915] smpboot: CPU0: Intel(R) Core(TM)2 Solo CPU    U3500  @ 1.40GHz (fam: 06, model: 17, stepping: 0a)
[    0.100000] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
[    0.100000] APIC delta adjusted to PM-Timer: 1247425 (1446994)
[    0.100000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.100000] ... version:                2
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      2
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             000000007fffffff
[    0.100000] ... fixed-purpose events:   3
[    0.100000] ... event mask:             0000000700000003
[    0.100000] x86: Booted up 1 node, 1 CPUs
[    0.100000] smpboot: Total of 1 processors activated (2794.13 BogoMIPS)
[    0.100184] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100324] devtmpfs: initialized
[    0.106963] EVM: security.selinux
[    0.106966] EVM: security.SMACK64
[    0.106968] EVM: security.ima
[    0.106970] EVM: security.capability
[    0.107035] PM: Registering ACPI NVS region [mem 0xbdd7f000-0xbdddffff] (397312 bytes)
[    0.108674] pinctrl core: initialized pinctrl subsystem
[    0.108764] regulator-dummy: no parameters
[    0.108811] RTC time:  1:05:57, date: 01/23/15
[    0.108862] NET: Registered protocol family 16
[    0.109047] cpuidle: using governor ladder
[    0.109050] cpuidle: using governor menu
[    0.109104] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.109107] ACPI: bus type PCI registered
[    0.109110] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.109198] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.109202] PCI: not using MMCONFIG
[    0.109204] PCI: Using configuration type 1 for base access
[    0.110685] bio: create slab <bio-0> at 0
[    0.110894] ACPI: Added _OSI(Module Device)
[    0.110897] ACPI: Added _OSI(Processor Device)
[    0.110900] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.110902] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113203] ACPI : EC: EC description table is found, configuring boot EC
[    0.121989] ACPI: Executed 1 blocks of module-level executable AML code
[    0.125003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.126600] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x83, should be 0xE5 (20131115/tbprint-214)
[    0.127185] ACPI: Interpreter enabled
[    0.127197] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.127205] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.127230] ACPI: (supports S0 S3 S4 S5)
[    0.127232] ACPI: Using IOAPIC for interrupt routing
[    0.127270] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.128246] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.156473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.156766] ACPI: No dock devices found.
[    0.167305] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.167315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.167782] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.168253] PCI host bridge to bus 0000:00
[    0.168259] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.168263] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.168266] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.168270] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.168273] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.168276] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff]
[    0.168291] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.168319] DMAR: Forcing write-buffer flush capability
[    0.168321] DMAR: Disabling IOMMU for graphics on this chipset
[    0.168435] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.168494] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.168560] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.168607] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.168625] pci 0000:00:02.0: reg 0x10: [mem 0xf9c00000-0xf9ffffff 64bit]
[    0.168637] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.168645] pci 0000:00:02.0: reg 0x20: [io  0xbc00-0xbc07]
[    0.168817] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.168891] pci 0000:00:1a.0: reg 0x20: [io  0xb880-0xb89f]
[    0.169043] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.169101] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.169175] pci 0000:00:1a.1: reg 0x20: [io  0xb800-0xb81f]
[    0.169325] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.169378] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.169451] pci 0000:00:1a.2: reg 0x20: [io  0xb480-0xb49f]
[    0.169601] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.169666] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.169700] pci 0000:00:1a.7: reg 0x10: [mem 0xf9bfbc00-0xf9bfbfff]
[    0.169840] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.169967] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.170030] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.170058] pci 0000:00:1b.0: reg 0x10: [mem 0xf9bf4000-0xf9bf7fff 64bit]
[    0.170181] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.170256] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.170311] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.170427] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.170504] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.170558] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.170684] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.170761] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.170814] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.170941] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.171018] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.171071] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.171187] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.171267] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.171319] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.171435] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.171511] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.171566] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.171692] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.171767] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.171823] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.171896] pci 0000:00:1d.0: reg 0x20: [io  0xb400-0xb41f]
[    0.172053] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.172107] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.172180] pci 0000:00:1d.1: reg 0x20: [io  0xb080-0xb09f]
[    0.172330] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.172384] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.172457] pci 0000:00:1d.2: reg 0x20: [io  0xb000-0xb01f]
[    0.172607] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.172683] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.172717] pci 0000:00:1d.7: reg 0x10: [mem 0xf9bfb800-0xf9bfbbff]
[    0.172857] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.172985] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.173039] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.173183] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.173236] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.173497] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.173532] pci 0000:00:1f.2: reg 0x10: [io  0xac00-0xac07]
[    0.173547] pci 0000:00:1f.2: reg 0x14: [io  0xa880-0xa883]
[    0.173561] pci 0000:00:1f.2: reg 0x18: [io  0xa800-0xa807]
[    0.173576] pci 0000:00:1f.2: reg 0x1c: [io  0xa480-0xa483]
[    0.173591] pci 0000:00:1f.2: reg 0x20: [io  0xa400-0xa41f]
[    0.173605] pci 0000:00:1f.2: reg 0x24: [mem 0xf9bfb000-0xf9bfb7ff]
[    0.173692] pci 0000:00:1f.2: PME# supported from D3hot
[    0.173884] pci 0000:01:00.0: [10de:06f1] type 00 class 0x030000
[    0.173903] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
[    0.173922] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.173942] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[    0.173954] pci 0000:01:00.0: reg 0x24: [io  0xcc00-0xcc7f]
[    0.173967] pci 0000:01:00.0: reg 0x30: [mem 0xfdee0000-0xfdefffff pref]
[    0.180020] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.180025] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.180030] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdefffff]
[    0.180037] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.180124] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.180270] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[    0.180306] pci 0000:03:00.0: reg 0x10: [mem 0xfdff0000-0xfdffffff 64bit]
[    0.180467] pci 0000:03:00.0: supports D1
[    0.180470] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.180519] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.188022] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.188032] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.188167] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.188174] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.188181] pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfeafffff]
[    0.188192] pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf8ffffff 64bit pref]
[    0.188280] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.188384] pci 0000:00:1c.4: PCI bridge to [bus 07]
[    0.188523] pci 0000:08:00.0: [1969:1063] type 00 class 0x020000
[    0.188559] pci 0000:08:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[    0.188578] pci 0000:08:00.0: reg 0x18: [io  0xec00-0xec7f]
[    0.188734] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188782] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.196024] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    0.196031] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.196038] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.196155] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[    0.196173] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.196176] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.196180] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.196184] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.196187] pci 0000:00:1e.0:   bridge window [mem 0xbde00000-0xffffffff] (subtractive decode)
[    0.196253] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.197193] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[    0.197278] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[    0.197359] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[    0.197437] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[    0.197518] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[    0.197598] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[    0.197678] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[    0.197759] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[    0.198096] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.198106] ACPI: \_SB_.PCI0: notify handler is installed
[    0.198175] Found 1 acpi root devices
[    0.198273] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[    0.198409] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.198413] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.198420] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.198422] vgaarb: loaded
[    0.198424] vgaarb: bridge control possible 0000:01:00.0
[    0.198426] vgaarb: no bridge control possible 0000:00:02.0
[    0.198703] SCSI subsystem initialized
[    0.198761] libata version 3.00 loaded.
[    0.198791] ACPI: bus type USB registered
[    0.198819] usbcore: registered new interface driver usbfs
[    0.198832] usbcore: registered new interface driver hub
[    0.198862] usbcore: registered new device driver usb
[    0.199004] PCI: Using ACPI for IRQ routing
[    0.210936] PCI: pci_cache_line_size set to 64 bytes
[    0.211029] e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff]
[    0.211032] e820: reserve RAM buffer [mem 0xbdd70000-0xbfffffff]
[    0.211155] NetLabel: Initializing
[    0.211158] NetLabel:  domain hash size = 128
[    0.211160] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.211183] NetLabel:  unlabeled traffic allowed by default
[    0.211263] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.211271] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.211277] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.213074] Switched to clocksource hpet
[    0.220245] AppArmor: AppArmor Filesystem Enabled
[    0.220304] pnp: PnP ACPI init
[    0.220325] ACPI: bus type PNP registered
[    0.220444] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.220450] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.220509] pnp 00:01: [dma 4]
[    0.220540] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.220596] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.220675] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.220769] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.220812] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.220855] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.221127] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.221132] system 00:07: [io  0x04c0-0x04cf] has been reserved
[    0.221136] system 00:07: [io  0x04d2-0x04ff] has been reserved
[    0.221140] system 00:07: [io  0x0800-0x087f] could not be reserved
[    0.221144] system 00:07: [io  0x0400-0x041f] has been reserved
[    0.221148] system 00:07: [io  0x0500-0x057f] has been reserved
[    0.221153] system 00:07: [mem 0xf9bfac00-0xf9bfacff window] has been reserved
[    0.221157] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.221161] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.221165] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.221169] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved
[    0.221173] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved
[    0.221177] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[    0.221181] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved
[    0.221189] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.221193] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.221198] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221304] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.221407] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[    0.221412] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[    0.221417] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221511] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.221517] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221616] system 00:0b: [io  0x0250-0x0253] has been reserved
[    0.221621] system 00:0b: [io  0x0256-0x025f] has been reserved
[    0.221625] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.221630] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.221634] system 00:0b: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.221638] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[    0.221642] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.221777] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.221783] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.222232] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.222238] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.222242] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.222246] system 00:0d: [mem 0x00100000-0xbddfffff] could not be reserved
[    0.222251] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.222445] pnp: PnP ACPI: found 14 devices
[    0.222448] ACPI: bus type PNP unregistered
[    0.229272] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.229278] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.229284] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdefffff]
[    0.229290] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.229296] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.229314] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.229322] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.229336] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.229341] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.229349] pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfeafffff]
[    0.229356] pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf8ffffff 64bit pref]
[    0.229366] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.229384] pci 0000:00:1c.4: PCI bridge to [bus 07]
[    0.229402] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    0.229406] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.229415] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.229428] pci 0000:00:1e.0: PCI bridge to [bus 09]
[    0.229447] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.229451] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.229454] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.229458] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.229461] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff]
[    0.229465] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.229468] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
[    0.229472] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.229476] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.229479] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.229483] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfeafffff]
[    0.229486] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf8ffffff 64bit pref]
[    0.229490] pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
[    0.229493] pci_bus 0000:08: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.229497] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
[    0.229500] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
[    0.229504] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[    0.229507] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000dffff]
[    0.229511] pci_bus 0000:09: resource 8 [mem 0xbde00000-0xffffffff]
[    0.229559] NET: Registered protocol family 2
[    0.229859] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.230027] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.230267] TCP: Hash tables configured (established 32768 bind 32768)
[    0.230325] TCP: reno registered
[    0.230337] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.230376] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.230482] NET: Registered protocol family 1
[    0.230504] pci 0000:00:02.0: Video device with shadowed ROM
[    0.231902] PCI: CLS 32 bytes, default 64
[    0.231989] Trying to unpack rootfs image as initramfs...
[    0.793241] Freeing initrd memory: 18756K (ffff880035b4e000 - ffff880036d9f000)
[    0.793251] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.793255] software IO TLB [mem 0xb9d70000-0xbdd70000] (64MB) mapped at [ffff8800b9d70000-ffff8800bdd6ffff]
[    0.793355] Simple Boot Flag at 0x51 set to 0x1
[    0.793502] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[    0.793579] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.793583] Scanning for low memory corruption every 60 seconds
[    0.793900] Initialise system trusted keyring
[    0.793978] audit: initializing netlink socket (disabled)
[    0.793999] type=2000 audit(1421975157.792:1): initialized
[    0.843655] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.845480] zbud: loaded
[    0.845677] VFS: Disk quotas dquot_6.5.2
[    0.845739] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.846396] fuse init (API version 7.22)
[    0.846501] msgmni has been set to 7832
[    0.846585] Key type big_key registered
[    0.846948] Key type asymmetric registered
[    0.846951] Asymmetric key parser 'x509' registered
[    0.846999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.847037] io scheduler noop registered
[    0.847040] io scheduler deadline registered (default)
[    0.847083] io scheduler cfq registered
[    0.847335] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.847534] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.847750] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.847965] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.848217] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.848424] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    0.848635] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    0.848773] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.848777] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.848782] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.848811] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.848818] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.848848] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.848852] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.848858] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.848886] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.848893] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.848921] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.848928] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.848958] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.848965] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.848996] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.848999] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    0.849006] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.849024] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.849090] pciehp 0000:00:01.0:pcie04: HPC vendor_id 8086 device_id 2a41 ss_vid 1043 ss_did 19c7
[    0.849133] pciehp 0000:00:01.0:pcie04: service driver pciehp loaded
[    0.849156] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 8086 ss_did 2944
[    0.849189] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    0.849197] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.849261] intel_idle: does not run on family 6 model 23
[    0.849270] ipmi message handler version 39.2
[    0.849341] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.849419] ACPI: AC Adapter [AC0] (on-line)
[    0.849569] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    0.849577] ACPI: Sleep Button [SLPB]
[    0.849630] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.853314] ACPI: Lid Switch [LID]
[    0.853371] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.853376] ACPI: Power Button [PWRF]
[    0.853815] Monitor-Mwait will be used to enter C-1 state
[    0.853823] Monitor-Mwait will be used to enter C-3 state
[    0.853834] tsc: Marking TSC unstable due to TSC halts in idle
[    0.853840] ACPI: acpi_idle registered with cpuidle
[    0.858543] thermal LNXTHERM:00: registered as thermal_zone0
[    0.858547] ACPI: Thermal Zone [THRM] (41 C)
[    0.858603] GHES: HEST is not enabled!
[    0.858704] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.860618] Linux agpgart interface v0.103
[    0.860689] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    0.860768] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.861621] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.861761] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    0.864844] brd: module loaded
[    0.867065] loop: module loaded
[    0.867612] libphy: Fixed MDIO Bus: probed
[    0.867750] tun: Universal TUN/TAP device driver, 1.6
[    0.867752] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.867810] PPP generic driver version 2.4.2
[    0.867860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.867865] ehci-pci: EHCI PCI platform driver
[    0.868022] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.868043] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.868063] ehci-pci 0000:00:1a.7: debug port 1
[    0.871966] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.872017] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9bfbc00
[    0.884097] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.884171] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.884175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.884179] usb usb1: Product: EHCI Host Controller
[    0.884182] usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
[    0.884185] usb usb1: SerialNumber: 0000:00:1a.7
[    0.884387] hub 1-0:1.0: USB hub found
[    0.884399] hub 1-0:1.0: 6 ports detected
[    0.884680] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.884689] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.884707] ehci-pci 0000:00:1d.7: debug port 1
[    0.888628] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.888683] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9bfb800
[    0.900100] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.900170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.900174] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.900177] usb usb2: Product: EHCI Host Controller
[    0.900181] usb usb2: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
[    0.900184] usb usb2: SerialNumber: 0000:00:1d.7
[    0.900314] hub 2-0:1.0: USB hub found
[    0.900325] hub 2-0:1.0: 6 ports detected
[    0.900853] ehci-platform: EHCI generic platform driver
[    0.900865] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.900868] ohci-pci: OHCI PCI platform driver
[    0.900880] ohci-platform: OHCI generic platform driver
[    0.900889] uhci_hcd: USB Universal Host Controller Interface driver
[    0.901045] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.901054] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.901183] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880
[    0.901330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.901335] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.901338] usb usb3: Product: UHCI Host Controller
[    0.901341] usb usb3: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[    0.901344] usb usb3: SerialNumber: 0000:00:1a.0
[    0.901582] hub 3-0:1.0: USB hub found
[    0.901593] hub 3-0:1.0: 2 ports detected
[    0.901838] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.901846] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.901968] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800
[    0.902108] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.902112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.902115] usb usb4: Product: UHCI Host Controller
[    0.902118] usb usb4: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[    0.902122] usb usb4: SerialNumber: 0000:00:1a.1
[    0.902352] hub 4-0:1.0: USB hub found
[    0.902364] hub 4-0:1.0: 2 ports detected
[    0.902622] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.902631] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.902760] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b480
[    0.902903] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.902907] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.902910] usb usb5: Product: UHCI Host Controller
[    0.902914] usb usb5: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[    0.902917] usb usb5: SerialNumber: 0000:00:1a.2
[    0.903134] hub 5-0:1.0: USB hub found
[    0.903145] hub 5-0:1.0: 2 ports detected
[    0.903340] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.903349] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.903429] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[    0.903567] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.903572] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.903575] usb usb6: Product: UHCI Host Controller
[    0.903578] usb usb6: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[    0.903614] usb usb6: SerialNumber: 0000:00:1d.0
[    0.903897] hub 6-0:1.0: USB hub found
[    0.903908] hub 6-0:1.0: 2 ports detected
[    0.904130] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.904142] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.904222] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080
[    0.904364] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.904368] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.904371] usb usb7: Product: UHCI Host Controller
[    0.904375] usb usb7: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[    0.904378] usb usb7: SerialNumber: 0000:00:1d.1
[    0.905242] hub 7-0:1.0: USB hub found
[    0.905256] hub 7-0:1.0: 2 ports detected
[    0.905454] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.905463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.905494] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
[    0.905556] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.905560] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.905563] usb usb8: Product: UHCI Host Controller
[    0.905567] usb usb8: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[    0.905570] usb usb8: SerialNumber: 0000:00:1d.2
[    0.905692] hub 8-0:1.0: USB hub found
[    0.905702] hub 8-0:1.0: 2 ports detected
[    0.906072] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.913309] i8042: Detected active multiplexing controller, rev 1.1
[    0.918261] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.918280] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.918312] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.918343] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.918451] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.918725] mousedev: PS/2 mouse device common for all mice
[    0.918912] rtc_cmos 00:02: RTC can wake from S4
[    0.919158] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.919242] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.919536] device-mapper: uevent: version 1.0.3
[    0.919626] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.919634] ledtrig-cpu: registered to indicate activity on CPUs
[    0.919788] TCP: cubic registered
[    0.919931] NET: Registered protocol family 10
[    0.920225] NET: Registered protocol family 17
[    0.920244] Key type dns_resolver registered
[    0.920470] Loading compiled-in X.509 certificates
[    0.922329] Loaded X.509 cert 'Magrathea: Glacier signing key: 508c3b4bf108ed36b6062f812782f77c37b98537'
[    0.922353] registered taskstats version 1
[    0.925548] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.925557] ACPI: Battery Slot [BAT0] (battery present)
[    0.927318] Key type trusted registered
[    0.930092] Key type encrypted registered
[    0.932873] AppArmor: AppArmor sha1 policy hashing enabled
[    0.932878] IMA: No TPM chip found, activating TPM-bypass!
[    0.933429] regulator-dummy: disabling
[    0.933481]   Magic number: 15:312:54
[    0.933618] rtc_cmos 00:02: setting system clock to 2015-01-23 01:05:58 UTC (1421975158)
[    0.934120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.934123] EDD information not available.
[    0.934160] PM: Hibernation image not present or could not be loaded.
[    0.936609] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    0.936612] Write protecting the kernel read-only data: 12288k
[    0.940535] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[    0.943796] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[    0.962473] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.962940] systemd-udevd[94]: starting version 204
[    1.075585] atl1c 0000:08:00.0: version 1.0.1.1-NAPI
[    1.076958] ahci 0000:00:1f.2: version 3.0
[    1.077134] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    1.077186] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.077220] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.077226] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs 
[    1.087601] scsi0 : ahci
[    1.090806] scsi1 : ahci
[    1.094077] scsi2 : ahci
[    1.097281] scsi3 : ahci
[    1.097348] ata1: SATA max UDMA/133 abar m2048@0xf9bfb000 port 0xf9bfb100 irq 47
[    1.097353] ata2: SATA max UDMA/133 abar m2048@0xf9bfb000 port 0xf9bfb180 irq 47
[    1.097355] ata3: DUMMY
[    1.097358] ata4: DUMMY
[    1.416116] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.417930] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.418099] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.418312] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    1.716103] usb 2-5: new high-speed USB device number 3 using ehci-pci
[    1.893120] usb 2-5: New USB device found, idVendor=04f2, idProduct=b16e
[    1.893125] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.893129] usb 2-5: Product: CKF8157
[    1.893132] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[    2.025151] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528992
[    2.066739] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[    2.136148] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    2.306829] usb 5-1: New USB device found, idVendor=0b05, idProduct=1751
[    2.306835] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.306838] usb 5-1: Product: BT-253
[    2.306841] usb 5-1: Manufacturer: Broadcom Corp
[    2.306845] usb 5-1: SerialNumber: 002243C72F49
[    2.346946] ata1.00: ACPI cmd ef/41:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.350792] ata1.00: ATA-8: FUJITSU MJA2160BH FFS G1, 00810020, max UDMA/100
[    2.350796] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.354079] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.399311] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.400776] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    2.548102] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    2.725533] usb 6-1: New USB device found, idVendor=046d, idProduct=c52f
[    2.725537] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.725541] usb 6-1: Product: USB Receiver
[    2.725544] usb 6-1: Manufacturer: Logitech
[    2.735935] hidraw: raw HID events driver (C) Jiri Kosina
[    2.748172] usbcore: registered new interface driver usbhid
[    2.748176] usbhid: USB HID core driver
[    2.753829] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input12
[    2.754857] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[    2.758179] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input13
[    2.759244] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[    3.325009] ata1.00: ACPI cmd ef/41:00:00:00:00:a0 (SET FEATURES) succeeded
[    3.366259] ata1.00: configured for UDMA/100
[    3.366403] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MJA2160B 0081 PQ: 0 ANSI: 5
[    3.366652] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    3.366732] sd 0:0:0:0: [sda] Write Protect is off
[    3.366737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.366772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.366985] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.415762]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    3.416242] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.684112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.689345] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.693055] ata2.00: ATAPI: HL-DT-ST DVDRAM GS20N, AS01, max UDMA/133
[    3.699070] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.702782] ata2.00: configured for UDMA/133
[    3.708333] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GS20N     AS01 PQ: 0 ANSI: 5
[    3.713274] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[    3.713278] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.713394] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.713466] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.362418] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    4.362424] EXT4-fs (sda1): write access will be enabled during recovery
[    4.669192] EXT4-fs (sda1): recovery complete
[    4.680379] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.932899] random: nonblocking pool is initialized
[    6.167789] init: plymouth-upstart-bridge main process (154) terminated with status 1
[    6.167809] init: plymouth-upstart-bridge main process ended, respawning
[    6.172929] init: plymouth-upstart-bridge main process (165) terminated with status 1
[    6.172948] init: plymouth-upstart-bridge main process ended, respawning
[    6.177995] init: plymouth-upstart-bridge main process (167) terminated with status 1
[    6.178014] init: plymouth-upstart-bridge main process ended, respawning
[    6.182963] init: plymouth-upstart-bridge main process (169) terminated with status 1
[    6.182982] init: plymouth-upstart-bridge main process ended, respawning
[    6.188508] init: plymouth-upstart-bridge main process (171) terminated with status 1
[    6.188528] init: plymouth-upstart-bridge main process ended, respawning
[    6.193749] init: plymouth-upstart-bridge main process (173) terminated with status 1
[    6.193768] init: plymouth-upstart-bridge main process ended, respawning
[    6.198780] init: plymouth-upstart-bridge main process (176) terminated with status 1
[    6.198798] init: plymouth-upstart-bridge main process ended, respawning
[    6.203872] init: plymouth-upstart-bridge main process (178) terminated with status 1
[    6.203891] init: plymouth-upstart-bridge main process ended, respawning
[    6.208768] init: plymouth-upstart-bridge main process (180) terminated with status 1
[    6.208787] init: plymouth-upstart-bridge main process ended, respawning
[    6.213547] init: plymouth-upstart-bridge main process (182) terminated with status 1
[    6.213565] init: plymouth-upstart-bridge main process ended, respawning
[    6.219775] init: plymouth-upstart-bridge main process (184) terminated with status 1
[    6.219793] init: plymouth-upstart-bridge respawning too fast, stopped
[   14.541745] Adding 6384636k swap on /dev/sda5.  Priority:-1 extents:1 across:6384636k FS
[   14.580959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.664817] systemd-udevd[288]: starting version 204
[   14.821615] lp: driver loaded but no devices found
[   14.846284] ppdev: user-space parallel port driver
[   14.951024] asus_laptop: Asus Laptop Support version 0.42
[   14.951222] asus_laptop:   UX50V model detected
[   14.964346] wmi: Mapper loaded
[   15.016295] asus_laptop: Backlight controlled by ACPI video driver
[   15.016410] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
[   15.058530] [drm] Initialized drm 1.1.0 20060810
[   15.223750] Bluetooth: Core ver 2.17
[   15.223827] NET: Registered protocol family 31
[   15.223830] Bluetooth: HCI device and connection manager initialized
[   15.223842] Bluetooth: HCI socket layer initialized
[   15.223846] Bluetooth: L2CAP socket layer initialized
[   15.223853] Bluetooth: SCO socket layer initialized
[   15.238333] cfg80211: Calling CRDA to update world regulatory domain
[   15.258734] type=1400 audit(1421975172.819:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=345 comm="apparmor_parser"
[   15.258745] type=1400 audit(1421975172.819:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=345 comm="apparmor_parser"
[   15.258753] type=1400 audit(1421975172.819:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=345 comm="apparmor_parser"
[   15.259530] type=1400 audit(1421975172.819:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=345 comm="apparmor_parser"
[   15.259539] type=1400 audit(1421975172.819:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=345 comm="apparmor_parser"
[   15.259941] type=1400 audit(1421975172.819:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=345 comm="apparmor_parser"
[   15.267890] type=1400 audit(1421975172.827:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=350 comm="apparmor_parser"
[   15.295784] usbcore: registered new interface driver btusb
[   15.305173] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   15.305184] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.305190] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   15.305196] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.305198] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   15.305203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.305206] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.371496] [drm] Memory usable by graphics device = 2048M
[   15.424323] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[   15.424365] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.424368] [drm] Driver supports precise vblank timestamp query.
[   15.424536] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[   15.520443] Linux video capture interface: v2.00
[   15.579724] fbcon: inteldrmfb (fb0) is primary device
[   15.668431] ath: phy0: Enable LNA combining
[   15.681523] ath: EEPROM regdomain: 0x60
[   15.681524] ath: EEPROM indicates we should expect a direct regpair map
[   15.681526] ath: Country alpha2 being used: 00
[   15.681527] ath: Regpair used: 0x60
[   15.716827] Console: switching to colour frame buffer device 170x48
[   15.721487] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.721491] i915 0000:00:02.0: registered panic notifier
[   15.737883] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.750660] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010820000, irq=17
[   15.761042] uvcvideo: Found UVC 1.00 device CKF8157 (04f2:b16e)
[   15.761623] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.779713] input: CKF8157 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input15
[   15.779876] usbcore: registered new interface driver uvcvideo
[   15.779879] USB Video Class driver (1.1.1)
[   15.791320] acpi device:1a: registered as cooling_device1
[   15.791476] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
[   15.791661] ACPI: Video Device [VGA1] (multi-head: yes  rom: yes  post: no)
[   15.799418] acpi device:1d: registered as cooling_device2
[   15.800637] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/LNXVIDEO:01/input/input17
[   15.800801] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   16.506711] cfg80211: World regulatory domain updated:
[   16.506757] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.506761] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.506764] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.506767] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.506770] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.506773] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.515328] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   16.546610] SKU: Nid=0x1d sku_cfg=0x40138205
[   16.546614] SKU: port_connectivity=0x1
[   16.546616] SKU: enable_pcbeep=0x1
[   16.546618] SKU: check_sum=0x00000003
[   16.546620] SKU: customization=0x00000082
[   16.546622] SKU: external_amp=0x0
[   16.546624] SKU: platform_type=0x1
[   16.546626] SKU: swap=0x0
[   16.546628] SKU: override=0x1
[   16.546982] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   16.546985]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.546987]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   16.546989]    mono: mono_out=0x0
[   16.546991]    dig-out=0x1e/0x0
[   16.546993]    inputs:
[   16.546996]      Mic=0x18
[   16.546998]      Internal Mic=0x12
[   16.547000] realtek: No valid SSID, checking pincfg 0x40138205 for NID 0x1d
[   16.547003] realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269
[   16.552244] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   16.552502] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   17.315282] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   18.277690] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   19.468144] init: failsafe main process (598) killed by TERM signal
[   19.919388] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.919393] Bluetooth: BNEP filters: protocol multicast
[   19.919406] Bluetooth: BNEP socket layer initialized
[   19.966338] Bluetooth: RFCOMM TTY layer initialized
[   19.966355] Bluetooth: RFCOMM socket layer initialized
[   19.966363] Bluetooth: RFCOMM ver 1.11
[   20.032000] type=1400 audit(1421975177.591:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=723 comm="apparmor_parser"
[   20.032035] type=1400 audit(1421975177.595:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=723 comm="apparmor_parser"
[   20.053694] type=1400 audit(1421975177.615:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=723 comm="apparmor_parser"
[   20.480734] type=1400 audit(1421975178.043:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=832 comm="apparmor_parser"
[   20.480747] type=1400 audit(1421975178.043:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
[   20.481227] type=1400 audit(1421975178.043:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
[   20.487211] type=1400 audit(1421975178.047:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=833 comm="apparmor_parser"
[   20.487223] type=1400 audit(1421975178.047:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
[   20.487231] type=1400 audit(1421975178.047:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
[   20.488043] type=1400 audit(1421975178.047:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
[   20.488052] type=1400 audit(1421975178.051:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
[   20.488593] type=1400 audit(1421975178.051:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
[   20.506798] type=1400 audit(1421975178.067:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=834 comm="apparmor_parser"
[   20.663193] init: cups main process (734) killed by HUP signal
[   20.663212] init: cups main process ended, respawning
[   21.020821] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.033716] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.068288] atl1c 0000:08:00.0: irq 50 for MSI/MSI-X
[   21.068403] atl1c 0000:08:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   25.902124] bbswitch: module verification failed: signature and/or  required key missing - tainting kernel
[   25.912144] bbswitch: version 0.7
[   25.912156] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VGA_
[   25.912164] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.P0P1.VGA_
[   25.912178] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   25.912231] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   25.912334] bbswitch: detected a nVidia _DSM function
[   25.912354] pci 0000:01:00.0: enabling device (0000 -> 0003)
[   25.912403] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   25.920288] bbswitch: disabling discrete graphics
[   25.936096] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   25.936751] pciehp 0000:00:01.0:pcie04: Card not present on Slot(16)
[   35.911980] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory
[   50.187396] audit_printk_skb: 126 callbacks suppressed
[   50.187402] type=1400 audit(1421975207.746:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2182 comm="apparmor_parser"
[   50.187413] type=1400 audit(1421975207.746:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2182 comm="apparmor_parser"
[   50.188506] type=1400 audit(1421975207.750:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2182 comm="apparmor_parser"
[  829.609886] bbswitch: enabling discrete graphics
[  829.609903] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  829.922872] pciehp 0000:00:01.0:pcie04: Card present on Slot(16)
[  830.292618] nvidia: module license 'NVIDIA' taints kernel.
[  830.292625] Disabling lock debugging due to kernel taint
[  830.318832] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[  830.326191] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[  830.326205] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.113  Mon Dec  1 21:08:13 PST 2014
[  831.796421] nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
[  831.802746] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.802801] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.802909] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.802941] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.802970] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.802999] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.803027] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.803056] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  831.818881] NVRM: failed to copy vbios to system memory.
[  831.819154] NVRM: RmInitAdapter failed! (0x30:0xffffffff:747)
[  831.819163] NVRM: rm_init_adapter failed for device bearing minor number 0
[  831.819193] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
[  923.964601] nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
[  923.971064] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.971120] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.971316] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.971350] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.971380] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.971410] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.971439] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.971469] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  923.987640] NVRM: failed to copy vbios to system memory.
[  923.987976] NVRM: RmInitAdapter failed! (0x30:0xffffffff:747)
[  923.987985] NVRM: rm_init_adapter failed for device bearing minor number 0
[  923.988238] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
[  978.049699] perf samples too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1213.678984] systemd-hostnamed[2613]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1258.498550] nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
[ 1258.505078] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.505132] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.505238] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.505271] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.505300] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.505329] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.505358] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.505387] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 1258.522384] NVRM: failed to copy vbios to system memory.
[ 1258.522679] NVRM: RmInitAdapter failed! (0x30:0xffffffff:747)
[ 1258.522688] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 1258.522720] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
adomin@mbi-ux50v:~$ 

       Contenu du fichier /var/log/Xorg.8.log

adomin@mbi-ux50v:~$ cat /var/log/Xorg.8.log
[  1258.451] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[  1258.451] X Protocol Version 11, Revision 0
[  1258.451] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[  1258.451] Current Operating System: Linux mbi-ux50v 3.13.0-44-generic #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 x86_64
[  1258.451] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=9e7a966a-6216-4d4c-9965-820b7dc26574 ro quiet splash rcutree.rcu_idle_gp_delay=1
[  1258.451] Build Date: 10 December 2014  06:15:52PM
[  1258.451] xorg-server 2:1.15.1-0ubuntu2.6 (For technical support please see http://www.ubuntu.com/support) 
[  1258.451] Current version of pixman: 0.30.2
[  1258.451] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1258.451] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1258.451] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jan 23 02:26:56 2015
[  1258.451] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[  1258.451] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[  1258.451] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1258.452] (==) ServerLayout "Layout0"
[  1258.452] (==) No screen section available. Using defaults.
[  1258.452] (**) |-->Screen "Default Screen Section" (0)
[  1258.452] (**) |   |-->Monitor "<default monitor>"
[  1258.452] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  1258.452] (**) |   |-->Device "DiscreteNvidia"
[  1258.452] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1258.452] (**) Option "AutoAddDevices" "false"
[  1258.452] (**) Option "AutoAddGPU" "false"
[  1258.452] (**) Not automatically adding devices
[  1258.452] (==) Automatically enabling devices
[  1258.452] (**) Not automatically adding GPU devices
[  1258.452] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1258.452] 	Entry deleted from font path.
[  1258.452] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  1258.452] 	Entry deleted from font path.
[  1258.452] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  1258.452] 	Entry deleted from font path.
[  1258.452] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  1258.452] 	Entry deleted from font path.
[  1258.452] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  1258.452] 	Entry deleted from font path.
[  1258.452] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[  1258.452] (++) ModulePath set to "/usr/lib/nvidia-331/xorg,/usr/lib/xorg/modules"
[  1258.453] (==) |-->Input Device "<default pointer>"
[  1258.453] (==) |-->Input Device "<default keyboard>"
[  1258.453] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[  1258.453] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[  1258.453] (II) Loader magic: 0x7fd05a27dd40
[  1258.453] (II) Module ABI versions:
[  1258.453] 	X.Org ANSI C Emulation: 0.4
[  1258.453] 	X.Org Video Driver: 15.0
[  1258.453] 	X.Org XInput driver : 20.0
[  1258.453] 	X.Org Server Extension : 8.0
[  1258.458] (II) xfree86: Adding drm device (/dev/dri/card1)
[  1258.458] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1258.461] (--) PCI: (0:1:0:0) 10de:06f1:1043:1ab2 rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[  1258.461] Initializing built-in extension Generic Event Extension
[  1258.461] Initializing built-in extension SHAPE
[  1258.461] Initializing built-in extension MIT-SHM
[  1258.461] Initializing built-in extension XInputExtension
[  1258.461] Initializing built-in extension XTEST
[  1258.461] Initializing built-in extension BIG-REQUESTS
[  1258.461] Initializing built-in extension SYNC
[  1258.461] Initializing built-in extension XKEYBOARD
[  1258.461] Initializing built-in extension XC-MISC
[  1258.461] Initializing built-in extension SECURITY
[  1258.461] Initializing built-in extension XINERAMA
[  1258.461] Initializing built-in extension XFIXES
[  1258.461] Initializing built-in extension RENDER
[  1258.461] Initializing built-in extension RANDR
[  1258.461] Initializing built-in extension COMPOSITE
[  1258.461] Initializing built-in extension DAMAGE
[  1258.461] Initializing built-in extension MIT-SCREEN-SAVER
[  1258.461] Initializing built-in extension DOUBLE-BUFFER
[  1258.461] Initializing built-in extension RECORD
[  1258.461] Initializing built-in extension DPMS
[  1258.461] Initializing built-in extension Present
[  1258.461] Initializing built-in extension DRI3
[  1258.461] Initializing built-in extension X-Resource
[  1258.461] Initializing built-in extension XVideo
[  1258.461] Initializing built-in extension XVideo-MotionCompensation
[  1258.461] Initializing built-in extension SELinux
[  1258.461] Initializing built-in extension XFree86-VidModeExtension
[  1258.461] Initializing built-in extension XFree86-DGA
[  1258.461] Initializing built-in extension XFree86-DRI
[  1258.461] Initializing built-in extension DRI2
[  1258.461] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[  1258.462] (II) "glx" will be loaded by default.
[  1258.462] (WW) "xmir" is not to be loaded by default. Skipping.
[  1258.462] (II) LoadModule: "glx"
[  1258.462] (II) Loading /usr/lib/nvidia-331/xorg/libglx.so
[  1258.490] (II) Module glx: vendor="NVIDIA Corporation"
[  1258.490] 	compiled for 4.0.2, module version = 1.0.0
[  1258.490] 	Module class: X.Org Server Extension
[  1258.490] (II) NVIDIA GLX Module  331.113  Mon Dec  1 20:24:35 PST 2014
[  1258.490] Loading extension GLX
[  1258.490] (II) LoadModule: "nvidia"
[  1258.490] (II) Loading /usr/lib/nvidia-331/xorg/nvidia_drv.so
[  1258.491] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1258.491] 	compiled for 4.0.2, module version = 1.0.0
[  1258.491] 	Module class: X.Org Video Driver
[  1258.491] (II) LoadModule: "mouse"
[  1258.491] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  1258.491] (II) Module mouse: vendor="X.Org Foundation"
[  1258.491] 	compiled for 1.15.0, module version = 1.9.0
[  1258.491] 	Module class: X.Org XInput Driver
[  1258.491] 	ABI class: X.Org XInput driver, version 20.0
[  1258.491] (II) LoadModule: "kbd"
[  1258.492] (WW) Warning, couldn't open module kbd
[  1258.492] (II) UnloadModule: "kbd"
[  1258.492] (II) Unloading kbd
[  1258.492] (EE) Failed to load module "kbd" (module does not exist, 0)
[  1258.492] (II) NVIDIA dlloader X Driver  331.113  Mon Dec  1 20:01:51 PST 2014
[  1258.492] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1258.492] (--) using VT number 7

[  1258.492] (II) Loading sub module "fb"
[  1258.492] (II) LoadModule: "fb"
[  1258.492] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1258.492] (II) Module fb: vendor="X.Org Foundation"
[  1258.492] 	compiled for 1.15.1, module version = 1.0.0
[  1258.493] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1258.493] (WW) Unresolved symbol: fbGetGCPrivateKey
[  1258.493] (II) Loading sub module "wfb"
[  1258.493] (II) LoadModule: "wfb"
[  1258.493] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1258.493] (II) Module wfb: vendor="X.Org Foundation"
[  1258.493] 	compiled for 1.15.1, module version = 1.0.0
[  1258.493] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1258.493] (II) Loading sub module "ramdac"
[  1258.493] (II) LoadModule: "ramdac"
[  1258.493] (II) Module "ramdac" already built-in
[  1258.493] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1258.493] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1258.494] (==) NVIDIA(0): RGB weight 888
[  1258.494] (==) NVIDIA(0): Default visual is TrueColor
[  1258.494] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1258.494] (**) NVIDIA(0): Option "NoLogo" "true"
[  1258.494] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[  1258.494] (**) NVIDIA(0): Option "UseEDID" "false"
[  1258.494] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[  1258.494] (**) NVIDIA(0): Enabling 2D acceleration
[  1258.494] (**) NVIDIA(0): Ignoring EDIDs
[  1258.494] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[  1258.494] (**) NVIDIA(0):     mode
[  1258.523] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[  1258.523] (EE) NVIDIA(GPU-0):     check your system's kernel log for additional error
[  1258.523] (EE) NVIDIA(GPU-0):     messages and refer to Chapter 8: Common Problems in the
[  1258.523] (EE) NVIDIA(GPU-0):     README for additional information.
[  1258.523] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[  1258.523] (EE) NVIDIA(0): Failing initialization of X screen 0
[  1258.523] (II) UnloadModule: "nvidia"
[  1258.523] (II) UnloadSubModule: "wfb"
[  1258.523] (II) UnloadSubModule: "fb"
[  1258.523] (EE) Screen(s) found, but none have a usable configuration.
[  1258.523] (EE) 
Fatal server error:
[  1258.523] (EE) no screens found(EE) 
[  1258.523] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1258.523] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1258.523] (EE) 
[  1258.523] (EE) Server terminated with error (1). Closing log file.
adomin@mbi-ux50v:~$ 

Voilà pour les infos demandées.
À noter quand même que quand je reboote le PC une fois sur deux le graphique part en carafe - c'est à dire que l'écran devient complètement "fuzzy"; plus que flou même comme si toute la synchro du moniteur était partie aux îles Marquises voir la ceinture de corail. C'est beau comme du Cousteau mais côté pratique c'est quand même autre chose.
Est-ce que ça te serait utile que je poste une vidéo de l'amorçage?


PC Portable Asus UX50V - CPU : Intel® Core™2 Solo CPU U3500 @ 1.40GHz - RAM : 3,8 Gio - DD : 149,05 Gio
IGP+GPU --> Technologie Optimus de NVIDIA : IGP : Mobile Intel® GM45 Express Chipset, GPU: NVIDIA G98M [GeForce G 105M]
OS : Ubuntu 14.04.1 LTS (64bits) / Unity (install 20/01/15) - pas de dual boot

Hors ligne

#834 Le 23/01/2015, à 13:04

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@Eccawchkup: OK, c’est embêtant, je suspecte une régression au niveau gestion de l’ACPI par le noyau. Tu l’as déjà fait fonctionner avant sur une version plus vieille d’Ubuntu ? Si oui laquelle ? Tu parles anglais couramment ? Une fois que tu auras répondu, on va partir sur un autre thread dont l’emplacement dépendra de tes réponses.

Hors ligne

#835 Le 23/01/2015, à 18:27

Eccawchkup

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Hi there,
Oui, avant d'installer Ubuntu 14.04.1 LTS, j'ai fait fonctionné cette machine avec :
Ubuntu 14.04 LTS Trusty Tahr
             12.04 LTS Precise Pangolin
             10.04 LTS Lucid Lynx
et - mais je ne me rappelle plus vraiment - des versions intermédiaires entre Lucid et Precise
Je sais qu'avec la 9.10 Karmic Koala, j'ai eu beaucoup de mal à installer l'OS car l'IHM d'install ne se lançait pas du tout. Comme j'étais novice à l'époque, je m'étais rendu à l'Ubuntu Party à la Cité des Sciences avec le PC sous le bras mais les Ubunteros n'avaient pas plus réussi que moi à installer l'OS. Alors, j'ai mis de côté cette machine et j'ai réessayé au fur et à mesure des sorties de versions d'Ubuntu.
Je ne me rappelle plus laquelle a fonctionné en premier 10.10? 11.04? 11.10?
Remarques: 1)  Entre Precise et Trusty je n'ai pas installé les versions intermédiaires.
                     2) J'ai retiré la batterie du PC le 9/07/11  (je sais "ça se fait pas" mais je l'ai fait quand même!). Depuis je l'ai toujours fait fonctionner sur secteur sans problème. J'ai remis la batterie depuis des fois que ça résolve quelque chose.

Quant à l'anglais vas-y tu peux envoyer les threads; j'ai travaillé 15 ans avec stés d'Outre-Manche/Atlantique donc No Problemo ou presque.

Dernière modification par Eccawchkup (Le 23/01/2015, à 18:30)


PC Portable Asus UX50V - CPU : Intel® Core™2 Solo CPU U3500 @ 1.40GHz - RAM : 3,8 Gio - DD : 149,05 Gio
IGP+GPU --> Technologie Optimus de NVIDIA : IGP : Mobile Intel® GM45 Express Chipset, GPU: NVIDIA G98M [GeForce G 105M]
OS : Ubuntu 14.04.1 LTS (64bits) / Unity (install 20/01/15) - pas de dual boot

Hors ligne

#836 Le 23/01/2015, à 20:16

Alcatorda

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@ArchangeGabriel : toujours le même message d'erreur, aucune évolution.
Je vais tenter une réinstallation propre, je te tiens au courant. smile

Hors ligne

#837 Le 24/01/2015, à 00:35

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@Alcatorda : Ben j’avais demandé les mêmes logs que d’hab si ça marche pas car je pense toujours que la réinstallation n’est pas forcément nécessaire, mais tant pis. Je reste plus ou moins dispo pour la suite.

@Eccawchkup : OK, ça part ici alors (il faut un compte GitHub) : https://github.com/Bumblebee-Project/Bu … issues/628

Hors ligne

#838 Le 26/01/2015, à 11:32

donjimmy

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,

je n'arrive pas à faire fonctionner bumblenee sur mon portable (GP60 2PE Leopard -x625FR kubuntu 14.04.1 LTS)

lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 14.04.1 LTS
Release:        14.04
Codename:       trusty
# lspci -vnn | egrep 'VGA|3D'
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller])
01:00.0 3D controller [0302]: NVIDIA Corporation GM108M [GeForce 840M] [10de:1341] (rev a2)

J'ai suivi la doc et voilà le résultat :

optirun -b none nvidia-settings -c :8
[  251.210894] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[  251.210968] [ERROR]Aborting because fallback start is disabled.

J'ai fait les modifications dans /etc/bumblebee/bumblebee.conf en mettant KernelDriver=nvidia-current et dans le /etc/default/grub ça fonctionne pas non plus.

Voilà mon dpkg -l

ii  bumblebee-nvidia                            3.2.1-5+xedgers14.04.1                                 amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-304                                  304.125-0ubuntu1~xedgers14.04.1                        amd64        NVIDIA legacy binary driver - version 304.125
rc  nvidia-346                                  346.35-0ubuntu1~xedgers14.04.1                         amd64        NVIDIA binary driver - version 346.35
ii  nvidia-current                              304.125-0ubuntu1~xedgers14.04.1                        amd64        Transitional package for nvidia-current
ii  nvidia-opencl-icd-304                       304.125-0ubuntu1~xedgers14.04.1                        amd64        NVIDIA OpenCL ICD
rc  nvidia-opencl-icd-346                       346.35-0ubuntu1~xedgers14.04.1                         amd64        NVIDIA OpenCL ICD
ii  nvidia-settings

J'ai essayé en installant ses drivers là :

sudo apt-get purge bumblebee-nvidia nvidia-304 nvidia-331 nvidia-settings
sudo apt-get install bumblebee-nvidia nvidia-346

Mais au démarrage je me retrouve avec un écran noir et plus d'interface graphique.
J'ai donc supprimé les paquets.

Je vous avoue que je suis un peu perdu sur ce coup quelqu'un peut il m'aider SVP.


Macbook pro retina 2013 15'
Kubuntu 16.04.3 LTS

Hors ligne

#839 Le 26/01/2015, à 11:48

alca94

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@ donjimmy

sudo apt-get install bumblebee-nvidia nvidia-346

avez vous lu le post ci dessus (832)
http://forum.ubuntu-fr.org/viewtopic.ph … #p19054901


POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#840 Le 28/01/2015, à 19:21

manu___

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour à vous,

Voilà avant toute chose, je souhaite dire que j'ai déjà utilisé bumblebee avant l'existence des drivers Optimus de Nvidia...
Mon problème se situe dans l'utilisation d'un jeu vidéo : Xcom Enemy Unknown pour STEAM linux... Le jeu ne se lance pas.
Le logo apparaît, le disque dur semble tourner un temps, mais après plus rien.

Voilà les données ont été présentées.

Maintenant je souhaite savoir si l'utilisation de bumblebee peut régler ce soucis? Sachant que le jeu ne se lance pas ni avec la carte Intel, ni avec la carte Nvidia...
Et que mon système est stable et que je ne souhaite pas trop mettre les mains à nouveau dans le cambouis...

merci beaucoup à vous.

ps. Il se peut que je ne reçoive pas correctement les notifications de réponse du forum.

Hors ligne

#841 Le 29/01/2015, à 11:54

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@donjimmy: Supprime le dossier /etc/bumblebee. Réinstalle les paquets de Bumblebee avec nvidia-331 plutôt que 346 et dit nous ce que ça donne.

@manu___: Si le jeu ne se lance pas avec Intel et NVIDIA avec nvidia-prime, bug du jeu, Bumblebee n’y changera rien.

Hors ligne

#842 Le 29/01/2015, à 12:18

manu___

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Merc à toi, ArchangeGabriel !

Hors ligne

#843 Le 31/01/2015, à 21:53

nans1906

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,

J'ai un problème au niveau de mon affichage sous ubuntu. J'ai un ordi avec deux cartes vidéos (intel et nvidia) et j'ai des couleurs toutes crades à l'écran, avec une ubuntu 14-04. Est ce que ce problème sera réglé sous vivid ? Sinon, est-ce que vous connaissez une astuce ?


Lenovo Thnkpad X201 avec Ubuntu Studio 16.04 Asus avec freebsd 11 et rasPI avec Recalbox et OSMC

Hors ligne

#844 Le 01/02/2015, à 23:10

ArchangeGabriel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Hum non, jamais vu ce genre de problème. Probablement pas lié selon moi.

Hors ligne

#845 Le 02/02/2015, à 05:50

nans1906

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

ArchangeGabriel a écrit :

Hum non, jamais vu ce genre de problème. Probablement pas lié selon moi.


Et c'est pour quelle raison selon toi ?

J'attend avec impatience le mois d'avril, en espérant que le problème soit réglé. Sinon, j'ai essayé avec d'autres distrib linux (mint, mais bon ça sert à rien), sous Fedora, y'a un bug d'affichage au niveau du menu, sous suse les couleurs sont aussi dégradées. Sous mandriva, idem.

Dernière modification par nans1906 (Le 02/02/2015, à 05:53)


Lenovo Thnkpad X201 avec Ubuntu Studio 16.04 Asus avec freebsd 11 et rasPI avec Recalbox et OSMC

Hors ligne

#846 Le 02/02/2015, à 07:33

PPdM

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

nans1906 a écrit :

Bonjour,

J'ai un problème au niveau de mon affichage sous ubuntu. J'ai un ordi avec deux cartes vidéos (intel et nvidia) et j'ai des couleurs toutes crades à l'écran, avec une ubuntu 14-04. Est ce que ce problème sera réglé sous vivid ? Sinon, est-ce que vous connaissez une astuce ?

Sans plus de détail ton souci est connu,c'est une panne classique, bien que pas très fréquente, sur les carte vidéo, a première vue cela ressemble a de la ram video défectueuse, essaye de désactiver la Nvidia pour voir si cela améliore les choses


La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#847 Le 02/02/2015, à 07:51

nans1906

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Ok mais je peut pas désactiver la carte nvidia dans le bios. Sous windows, elle fonctionne sans problème, enfin, je pense car je ne joue pas à des jeux vidéos qui demande une carte graphique puissante.

Donc ma question est : comment désactiver ma carte nvidia qui pose problème ?

D'ailleurs, il y a une personne qui a le même problème que moi sur le même modèle de portable :

http://forum.ubuntu-fr.org/viewtopic.php?id=1623751

Dernière modification par nans1906 (Le 02/02/2015, à 08:07)


Lenovo Thnkpad X201 avec Ubuntu Studio 16.04 Asus avec freebsd 11 et rasPI avec Recalbox et OSMC

Hors ligne

#848 Le 02/02/2015, à 13:29

PPdM

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Désolé mais je n'ai pas la réponse, je n'ai pas de portable avec cette conf mais de ce que j'ai lu il est possible de la désactiver, peut être que Archange a la réponse.
Mais pour le problème de ram, tout dépend comment les ressource de la CG sont utilisés, donc le phénomène peut ne pas être systématique mais se manifester seulement dans des config particulières, liées au pilotes ou aux applis, les pannes qui ne sont pas franches sont toujours une galère ( comme le femmes big_smile )


La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#849 Le 02/02/2015, à 17:30

nans1906

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

PPdM a écrit :

Désolé mais je n'ai pas la réponse, je n'ai pas de portable avec cette conf mais de ce que j'ai lu il est possible de la désactiver, peut être que Archange a la réponse.
Mais pour le problème de ram, tout dépend comment les ressource de la CG sont utilisés, donc le phénomène peut ne pas être systématique mais se manifester seulement dans des config particulières, liées au pilotes ou aux applis, les pannes qui ne sont pas franches sont toujours une galère ( comme le femmes big_smile )



Oui, lol. smile

Je n'ai plus qu'à attendre une intervention du ciel. wink


Lenovo Thnkpad X201 avec Ubuntu Studio 16.04 Asus avec freebsd 11 et rasPI avec Recalbox et OSMC

Hors ligne

#850 Le 03/02/2015, à 12:36

PengouinPdt

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@archangel: Bon, aujourd'hui, bien obligé de revenir vers toi.
Suite à une mise-à-jour système, ... le laptop en question redémarre, mais je n'ai plus de session graphique.
Donc, je dois essayer de le dépanner en mode console ...

Dans un premier temps, j'ai supprimé tous les paquets bumblebee-nvidia, nvidia-* et libcuda-* installés.
Puis, j'ai réinstallé bumblebee-nvidia, et nvidia-331 ... informé des problèmes avec les màj ...

----

En fait, c'était le gestionnaire de connexion qui était parti aux champs !
Y'a des fois, je te dis moi ... tsss

Désolé du bruit !

Dernière modification par PengouinPdt (Le 04/02/2015, à 20:09)


Ego ~
YUP.py :: Yet Uploader Pixxie.py :: script python : post d'images sur forum !

Hors ligne