Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#51 Le 17/05/2020, à 21:42

heronheronpetitpatapon

Re : Panne de disque dur [RESOLU]

Oui c'est fait j'ai tout réinstalé sur le petit SSD :

marco@marco-N14xWU:~$ sudo smartctl -H -i /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     WD Blue and Green SSDs
Device Model:     WDC WDS120G2G0B-00EPW0
Serial Number:    183168800794
LU WWN Device Id: 5 001b44 8b63dd2ec
Firmware Version: UI450000
User Capacity:    120040980480 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun May 17 22:41:55 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

marco@marco-N14xWU:~$ 

...Ubuntu Rocks....

Hors ligne

#52 Le 17/05/2020, à 21:52

heronheronpetitpatapon

Re : Panne de disque dur [RESOLU]

Résultat du teste fais sur /sdb (le SSD) sur lequel j'ai tout réinstallé :

marco@marco-N14xWU:~$ sudo smartctl -l selftest /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1090         -
# 2  Short offline       Completed without error       00%      1083         -
# 3  Extended offline    Completed without error       00%       479         -
# 4  Extended offline    Self-test routine in progress 30%       479         -
# 5  Extended offline    Self-test routine in progress 30%       479         -
# 6  Extended offline    Self-test routine in progress 30%       479         -
# 7  Extended offline    Self-test routine in progress 30%       479         -
# 8  Extended offline    Self-test routine in progress 30%       479         -
# 9  Extended offline    Self-test routine in progress 30%       479         -
#10  Extended offline    Self-test routine in progress 30%       479         -
#11  Extended offline    Self-test routine in progress 30%       479         -
#12  Extended offline    Self-test routine in progress 30%       479         -
#13  Extended offline    Self-test routine in progress 30%       479         -
#14  Extended offline    Self-test routine in progress 30%       479         -
#15  Extended offline    Self-test routine in progress 30%       479         -
#16  Extended offline    Self-test routine in progress 40%       479         -
#17  Extended offline    Self-test routine in progress 40%       479         -
#18  Extended offline    Self-test routine in progress 40%       479         -
#19  Extended offline    Self-test routine in progress 40%       479         -
#20  Extended offline    Self-test routine in progress 40%       479         -
#21  Extended offline    Self-test routine in progress 40%       479         -

marco@marco-N14xWU:~$ 
marco@marco-N14xWU:~$  sudo smartctl -s on -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     WD Blue and Green SSDs
Device Model:     WDC WDS120G2G0B-00EPW0
Serial Number:    183168800794
LU WWN Device Id: 5 001b44 8b63dd2ec
Firmware Version: UI450000
User Capacity:    120040980480 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun May 17 22:50:27 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x15) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Abort Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  21) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1090
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1272
165 Block_Erase_Count       0x0032   100   100   000    Old_age   Always       -       827
166 Minimum_PE_Cycles_TLC   0x0032   100   100   ---    Old_age   Always       -       9
167 Max_Bad_Blocks_per_Die  0x0032   100   100   ---    Old_age   Always       -       0
168 Maximum_PE_Cycles_TLC   0x0032   100   100   ---    Old_age   Always       -       14
169 Total_Bad_Blocks        0x0032   100   100   ---    Old_age   Always       -       131
170 Grown_Bad_Blocks        0x0032   100   100   ---    Old_age   Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
173 Average_PE_Cycles_TLC   0x0032   100   100   000    Old_age   Always       -       9
174 Unexpected_Power_Loss   0x0032   100   100   000    Old_age   Always       -       62
184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   ---    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   072   045   000    Old_age   Always       -       28 (Min/Max 10/45)
199 UDMA_CRC_Error_Count    0x0032   100   100   ---    Old_age   Always       -       0
230 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       0x022401500224
232 Available_Reservd_Space 0x0033   100   100   005    Pre-fail  Always       -       100
233 NAND_GB_Written_TLC     0x0032   100   100   ---    Old_age   Always       -       1070
234 NAND_GB_Written_SLC     0x0032   100   100   000    Old_age   Always       -       4606
241 Host_Writes_GiB         0x0030   100   100   000    Old_age   Offline      -       1803
242 Host_Reads_GiB          0x0030   100   100   000    Old_age   Offline      -       825
244 Temp_Throttle_Status    0x0032   000   100   ---    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1090         -
# 2  Short offline       Completed without error       00%      1083         -
# 3  Extended offline    Completed without error       00%       479         -
# 4  Extended offline    Self-test routine in progress 30%       479         -
# 5  Extended offline    Self-test routine in progress 30%       479         -
# 6  Extended offline    Self-test routine in progress 30%       479         -
# 7  Extended offline    Self-test routine in progress 30%       479         -
# 8  Extended offline    Self-test routine in progress 30%       479         -
# 9  Extended offline    Self-test routine in progress 30%       479         -
#10  Extended offline    Self-test routine in progress 30%       479         -
#11  Extended offline    Self-test routine in progress 30%       479         -
#12  Extended offline    Self-test routine in progress 30%       479         -
#13  Extended offline    Self-test routine in progress 30%       479         -
#14  Extended offline    Self-test routine in progress 30%       479         -
#15  Extended offline    Self-test routine in progress 30%       479         -
#16  Extended offline    Self-test routine in progress 40%       479         -
#17  Extended offline    Self-test routine in progress 40%       479         -
#18  Extended offline    Self-test routine in progress 40%       479         -
#19  Extended offline    Self-test routine in progress 40%       479         -
#20  Extended offline    Self-test routine in progress 40%       479         -
#21  Extended offline    Self-test routine in progress 40%       479         -

Selective Self-tests/Logging not supported

marco@marco-N14xWU:~$ 

teste sur /sda (le disque defectueux) que j'ai totalement vidé :

marco@marco-N14xWU:~$ sudo smartctl -l selftest /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%      4079         1400416392
# 2  Short offline       Completed: read failure       90%      4078         1400416392
# 3  Extended offline    Completed without error       00%      1809         -
# 4  Short offline       Completed without error       00%      1806         -

marco@marco-N14xWU:~$ 
marco@marco-N14xWU:~$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate FireCuda 2.5
Device Model:     ST1000LX015-1U7172
Serial Number:    WL1DK0PB
LU WWN Device Id: 5 000c50 0babc3293
Firmware Version: SDM1
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun May 17 22:52:11 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 164) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   050   050   006    Pre-fail  Always       -       214294155
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1300
  5 Reallocated_Sector_Ct   0x0033   090   090   036    Pre-fail  Always       -       6848
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       130712641
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4081 (88 19 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1271
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   051   051   000    Old_age   Always       -       49
188 Command_Timeout         0x0032   099   097   000    Old_age   Always       -       115966148639
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   067   055   040    Old_age   Always       -       33 (Min/Max 33/36)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       6
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       53
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1659
194 Temperature_Celsius     0x0022   033   045   000    Old_age   Always       -       33 (0 15 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       56
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       56
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4073h+34m+38.594s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       9170563748
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157770126
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 49 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 49 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:15:08.606  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.573  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.541  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.540  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.540  READ FPDMA QUEUED

Error 48 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      00:14:44.562  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.560  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.557  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.555  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.553  READ FPDMA QUEUED

Error 47 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 70 ff ff ff 4f 00      11:39:32.892  WRITE FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      11:39:32.890  READ FPDMA QUEUED
  61 00 20 ff ff ff 4f 00      11:39:32.890  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      11:39:32.889  WRITE FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      11:39:32.880  SET FEATURES [Enable SATA feature]

Error 46 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:39:31.805  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      11:39:30.137  FLUSH CACHE EXT
  61 00 08 ff ff ff 4f 00      11:39:30.137  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      11:39:30.135  FLUSH CACHE EXT
  61 00 38 ff ff ff 4f 00      11:39:30.135  WRITE FPDMA QUEUED

Error 45 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:39:29.205  READ FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      11:39:29.195  SET FEATURES [Enable SATA feature]
  ef 10 02 00 00 00 a0 00      11:39:29.185  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      11:39:29.159  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      11:39:29.115  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%      4079         1400416392
# 2  Short offline       Completed: read failure       90%      4078         1400416392
# 3  Extended offline    Completed without error       00%      1809         -
# 4  Short offline       Completed without error       00%      1806         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

marco@marco-N14xWU:~$ 

Vous en pensez quoi? faut-il que je pousse l'analyse, d'autres testes seraient utiles?
Merci de votre aide! j'ai appris bcp sur les disques sur et surtout à en avoir moins peur! :-)

Dernière modification par heronheronpetitpatapon (Le 17/05/2020, à 21:54)


...Ubuntu Rocks....

Hors ligne

#53 Le 18/05/2020, à 14:00

geole

Re : Panne de disque dur [RESOLU]

heronheronpetitpatapon a écrit :

Bon le teste de badblocks vient de se terminer :

kubuntu@kubuntu:~$ sudo badblocks -nvs /dev/sda
Pass completed, 976762584 bad blocks found. (976762584/0/0 errors)
kubuntu@kubuntu:~$   

Il est bel et bien mort je crois :-p j'ai pu qu'a acheter un nouveau disque, un SSD pour le coup quite à y mettre le prix!

Je suis très surpris de ce résultat
Vu la taille du disque, vu que l'outil  travaille en bloc de 1024 octets.   La conclusion serait que pas un seul secteur est en bon état!

J'ai beaucoup de mal à le croire.

Comme je comprends que ubuntu est disponible après réinstallation sur la totalité du SSD, tu devrais lancer gnome disque utility,
et reformater la  partition du disque dur avec contrôle de la qualité disque.
Une idée, supprimer toutes les partitions, en créer une de  50  Go,  La formater. Regarder et relever  le temps que cela prend.
Puis en créer une autre de 50 Go   ou plus grande en fonction du temps pris ... Regarder le temps que cela prend.
Cela te ferait 20 partitions à tester.  Normalement les 20 temps devraient être proches.   Si l'un ou deux explosent, Cela signifie que ces endroits sont à problèmes.
Tu refais un rapport smartctl et en fonction du résultat:  Disque à la déchetterie  ou suppression des 20 partitions et création en fonction de tes besoins.

AJOUT

Model Family:     Seagate FireCuda 2.5
Device Model:     ST1000LX015-1U7172
Firmware Version: SDM1
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical

===>    sudo badblocks -nvs  -b 4096 /dev/sda

Dernière modification par geole (Le 18/05/2020, à 14:08)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#54 Le 18/05/2020, à 14:34

heronheronpetitpatapon

Re : Panne de disque dur [RESOLU]

geole a écrit :

Comme je comprends que ubuntu est disponible après réinstallation sur la totalité du SSD, tu devrais lancer gnome disque utility,
et reformater la partition du disque dur avec contrôle de la qualité disque.

C'est lancé...4 à 5h d'attente...je réécris tout avec des zéro.


...Ubuntu Rocks....

Hors ligne

#55 Le 19/05/2020, à 10:17

heronheronpetitpatapon

Re : Panne de disque dur [RESOLU]

Bon la messe est dite après avoir effacté le disque totalement (réécrit avec des zéro) fait une vérification approfondie et réécrit une nouvelle table de partition (le tout à pris bien 24h), le disque est toujours moribond, enfin je peux l'ouvrir et y stocker des fichier si je veux, mais d'après les données ci-dessous, comment dire, je ne préfère pas, surtout ci ce sont mes fichiers à moi  smile :

marco@marco-N14xWU:~$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate FireCuda 2.5
Device Model:     ST1000LX015-1U7172
Serial Number:    WL1DK0PB
LU WWN Device Id: 5 000c50 0babc3293
Firmware Version: SDM1
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue May 19 11:11:28 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 164) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   083   050   006    Pre-fail  Always       -       219103530
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1301
  5 Reallocated_Sector_Ct   0x0033   089   089   036    Pre-fail  Always       -       6984
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       133625518
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4109 (94 50 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1272
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   051   051   000    Old_age   Always       -       49
188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       115966214176
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   066   055   040    Old_age   Always       -       34 (Min/Max 23/41)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       6
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       53
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1660
194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 15 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4100h+41m+04.215s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       11128344380
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157927137
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 49 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 49 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:15:08.606  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.573  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.541  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.540  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:15:08.540  READ FPDMA QUEUED

Error 48 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      00:14:44.562  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.560  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.557  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.555  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:14:44.553  READ FPDMA QUEUED

Error 47 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 70 ff ff ff 4f 00      11:39:32.892  WRITE FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      11:39:32.890  READ FPDMA QUEUED
  61 00 20 ff ff ff 4f 00      11:39:32.890  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00      11:39:32.889  WRITE FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      11:39:32.880  SET FEATURES [Enable SATA feature]

Error 46 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:39:31.805  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      11:39:30.137  FLUSH CACHE EXT
  61 00 08 ff ff ff 4f 00      11:39:30.137  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00      11:39:30.135  FLUSH CACHE EXT
  61 00 38 ff ff ff 4f 00      11:39:30.135  WRITE FPDMA QUEUED

Error 45 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:39:29.205  READ FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      11:39:29.195  SET FEATURES [Enable SATA feature]
  ef 10 02 00 00 00 a0 00      11:39:29.185  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      11:39:29.159  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      11:39:29.115  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4109         -
# 2  Short offline       Completed without error       00%      4108         -
# 3  Short offline       Completed: read failure       90%      4089         1400416392
# 4  Short offline       Completed: read failure       90%      4089         1400416392
# 5  Short offline       Completed: read failure       90%      4079         1400416392
# 6  Short offline       Completed: read failure       90%      4078         1400416392
# 7  Extended offline    Completed without error       00%      1809         -
# 8  Short offline       Completed without error       00%      1806         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

marco@marco-N14xWU:~$ 

Aller je vais le changer, la suite ici --> https://forum.ubuntu-fr.org/viewtopic.p … #p22287742 smile
merci à tous pour votre aide ça n'a aps été facile, mais j'ai appris bcp ces derniers jours sur les disques sdur et sur les testes SMART.

Dernière modification par heronheronpetitpatapon (Le 19/05/2020, à 10:21)


...Ubuntu Rocks....

Hors ligne

#56 Le 19/05/2020, à 11:14

geole

Re : Panne de disque dur [RESOLU]

Bonjour.
Quelque soit le disque, même s'il est un SSD, il peut toujours y avoir un ennui.
Tu peux toujours commettre une grosse erreur de manipulation supprimant toutes tes données.
Donc quel que soit l'état du disque, il est nécessaire de sécuriser le disque.

Après ces 24 heures non-stop, il me semble qu'au premier coup d'oeil le disque a très  bien supporté.
Il reste juste à guetter  l'arrivée du premier secteur défectueux irrécupérable.
Je suis tenté par l'écriture d'un script qui alerterait par émail de cette arrivée.

Pour le tableau récapitulatif,    j'ai repris les deux rapports en éliminant ce qui était identique.
la premier ligne est l'ancienne valeur,  la seconde ligne est la nouvelle valeur.
Les lignes suivantes sont mes commentaires lorsque j'ai pensé utile de le mettre.

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   051   051   006    Pre-fail  Always       -       181330119
  1 Raw_Read_Error_Rate     0x000f   083   050   006    Pre-fail  Always       -       219103530
                            indique le taux d’erreur matérielle lors de la lecture de la surface du disque
                            Le taux de réussite est actuellement meilleur à 83% au lieu de 51% 
                            Pendant la grosse réparation, il est descendu à 50%
     
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1295
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1301

  5 Reallocated_Sector_Ct   0x0033   090   090   036    Pre-fail  Always       -       6416
  5 Reallocated_Sector_Ct   0x0033   089   089   036    Pre-fail  Always       -       6984
                            On savait qu'il y avait 48 secteurs illisibles en  attente
                            D'autres ont été détectés pendant l'inspection soit pour un total de 568
                            Mais il y a encore de la réserve avant le failing-now (6984/(100-89)*(89-36)=33000
                            
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       130680578
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       133625518
                            Taux d’erreurs d’accès des têtes magnétiques:  Elles ont subit le choc avec succès.
                            Ceci est un point important. lorsque les têtes ne fonctionnent pas très bien, elles se dégradent de plus en plus vite.

  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4078 (190 57 0)
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4109 (94 50 0)
                            Donc 31 heures de fonctionnement intense.
  
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1269
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1272

188 Command_Timeout         0x0032   097   097   000    Old_age   Always       -       107376017436
188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       115966214176
                            Il n'y a plus de commandes qui ne fonctionnent pas 100% de bonnes

190 Airflow_Temperature_Cel 0x0022   071   055   040    Old_age   Always       -       29 (Min/Max 29/34)
190 Airflow_Temperature_Cel 0x0022   066   055   040    Old_age   Always       -       34 (Min/Max 23/41)
                            Les ventilateurs sont efficaces

193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1654
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1660

194 Temperature_Celsius     0x0022   029   045   000    Old_age   Always       -       29 (0 15 0 0 0)
194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 15 0 0 0)
                            Le disque a à peine chauffé de 5 degrés

197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       48
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       48
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
                            Le reformatage a été efficace. Il reste juste à surveiller ce compteur.
                            Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais.

240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4070h+11m+17.640s
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4100h+41m+04.215s

241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       9137893844
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       11128344380
                           Il a donc écrit en 31 heures, 22% des écritures précédentes

242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157475994
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157927137

254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

Error 49 occurred at disk power-on lifetime: 4078 hours   Error: UNC at LBA = 0x0fffffff = 268435455
Error 49 occurred at disk power-on lifetime: 4078 hours   Error: UNC at LBA = 0x0fffffff = 268435455
                       Donc pas de nouvelles erreurs pendant cette opération de remise en état 

Dernière modification par geole (Le 19/05/2020, à 12:35)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#57 Le 19/05/2020, à 12:05

heronheronpetitpatapon

Re : Panne de disque dur [RESOLU]

Merci pour ces infos, oui ce script peut-être une très bonne idée malheureusement, je ne sais pas en écrire !
Voila le rapport complet je crois (créé avec gsmartmontools) qui affiches les 20 dernières erreurs au lieu des cinq précdément :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate FireCuda 2.5
Device Model:     ST1000LX015-1U7172
Serial Number:    WL1DK0PB
LU WWN Device Id: 5 000c50 0babc3293
Firmware Version: SDM1
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue May 19 13:01:07 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 164) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   052   050   006    -    5827928
  3 Spin_Up_Time            PO----   099   099   000    -    0
  4 Start_Stop_Count        -O--CK   099   099   020    -    1301
  5 Reallocated_Sector_Ct   PO--CK   089   089   036    -    7128
  7 Seek_Error_Rate         POSR--   081   060   045    -    133641001
  9 Power_On_Hours          -O--CK   096   096   000    -    4110 (211 33 0)
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   099   099   020    -    1272
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   051   051   000    -    49
188 Command_Timeout         -O--CK   100   097   000    -    115966214176
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   067   055   040    -    33 (Min/Max 23/41)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    6
192 Power-Off_Retract_Count -O--CK   100   100   000    -    53
193 Load_Cycle_Count        -O--CK   100   100   000    -    1661
194 Temperature_Celsius     -O---K   033   045   000    -    33 (0 15 0 0 0)
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
240 Head_Flying_Hours       ------   100   253   000    -    4102h+30m+42.959s
241 Total_LBAs_Written      ------   100   253   000    -    11159208876
242 Total_LBAs_Read         ------   100   253   000    -    7157928227
254 Free_Fall_Sensor        -O--CK   100   100   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x24       GPL     R/O    512  Current Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      24  Device vendor specific log
0xa2       GPL     VS    6920  Device vendor specific log
0xa8       GPL,SL  VS     136  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    7680  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      16  Device vendor specific log
0xc2       GPL,SL  VS     240  Device vendor specific log
0xc3       GPL,SL  VS       8  Device vendor specific log
0xc4       GPL,SL  VS      24  Device vendor specific log
0xc9       GPL,SL  VS       1  Device vendor specific log
0xca       GPL,SL  VS      16  Device vendor specific log
0xd3       GPL     VS    1920  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 49 (device log contains only the most recent 20 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 49 [8] occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 78 a8 88 00 00  Error: UNC at LBA = 0x5378a888 = 1400416392

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 78 a8 88 40 00     00:15:08.606  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 78 a8 80 40 00     00:15:08.573  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 78 a8 78 40 00     00:15:08.541  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 78 a8 70 40 00     00:15:08.540  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 78 a8 68 40 00     00:15:08.540  READ FPDMA QUEUED

Error 48 [7] occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 78 a8 88 00 00  Error: UNC at LBA = 0x5378a888 = 1400416392

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 01 00 00 00 53 78 7c 38 40 00     00:14:44.562  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 78 7b 38 40 00     00:14:44.560  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 78 7a 38 40 00     00:14:44.557  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 78 79 38 40 00     00:14:44.555  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 78 78 38 40 00     00:14:44.553  READ FPDMA QUEUED

Error 47 [6] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: WP at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 70 00 00 3a 07 c3 80 40 00     11:39:32.892  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 98 40 00     11:39:32.890  READ FPDMA QUEUED
  61 00 00 00 20 00 00 48 cf a4 e0 40 00     11:39:32.890  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 48 cc 74 b0 40 00     11:39:32.889  WRITE FPDMA QUEUED
  ef 00 10 00 03 00 00 00 00 00 00 a0 00     11:39:32.880  SET FEATURES [Enable SATA feature]

Error 46 [5] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     11:39:31.805  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 a0 00     11:39:30.137  FLUSH CACHE EXT
  61 00 00 00 08 00 00 3a 07 c3 78 40 00     11:39:30.137  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 a0 00     11:39:30.135  FLUSH CACHE EXT
  61 00 00 00 38 00 00 3a 07 c3 40 40 00     11:39:30.135  WRITE FPDMA QUEUED

Error 45 [4] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     11:39:29.205  READ FPDMA QUEUED
  ef 00 10 00 03 00 00 00 00 00 00 a0 00     11:39:29.195  SET FEATURES [Enable SATA feature]
  ef 00 10 00 02 00 00 00 00 00 00 a0 00     11:39:29.185  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 00     11:39:29.159  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:39:29.115  IDENTIFY DEVICE

Error 44 [3] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     11:39:28.317  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 90 40 00     11:39:28.316  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 88 40 00     11:39:28.316  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 80 40 00     11:39:28.314  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 78 40 00     11:39:28.314  READ FPDMA QUEUED

Error 43 [2] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 01 00 00 00 53 9e 37 f0 40 00     11:39:27.318  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9e 36 f0 40 00     11:39:27.315  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9e 35 f0 40 00     11:39:27.311  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9e 34 f0 40 00     11:39:27.307  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9e 33 f0 40 00     11:39:27.303  READ FPDMA QUEUED

Error 42 [1] occurred at disk power-on lifetime: 3805 hours (158 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     02:37:53.410  READ FPDMA QUEUED
  ef 00 10 00 03 00 00 00 00 00 00 a0 00     02:37:53.401  SET FEATURES [Enable SATA feature]
  ef 00 10 00 02 00 00 00 00 00 00 a0 00     02:37:53.391  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 00     02:37:53.365  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 00     02:37:53.321  IDENTIFY DEVICE

Error 41 [0] occurred at disk power-on lifetime: 3805 hours (158 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     02:37:52.419  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 90 40 00     02:37:52.418  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 88 40 00     02:37:52.418  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 80 40 00     02:37:52.418  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 78 40 00     02:37:52.418  READ FPDMA QUEUED

Error 40 [19] occurred at disk power-on lifetime: 3805 hours (158 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 01 00 00 00 53 9e 01 e0 40 00     02:37:51.780  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9e 00 e0 40 00     02:37:51.779  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9d ff e0 40 00     02:37:51.778  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9d fe e0 40 00     02:37:51.776  READ FPDMA QUEUED
  60 00 00 01 00 00 00 53 9d fd e0 40 00     02:37:51.775  READ FPDMA QUEUED

Error 39 [18] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: WP at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 18 00 00 53 10 04 80 40 00     01:46:30.187  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 48 c8 d5 28 40 00     01:46:30.184  WRITE FPDMA QUEUED
  61 00 00 00 10 00 00 53 14 05 c8 40 00     01:46:30.183  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 98 40 00     01:46:30.182  READ FPDMA QUEUED
  61 00 00 00 08 00 00 48 c8 fb a0 40 00     01:46:30.182  WRITE FPDMA QUEUED

Error 38 [17] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     01:46:27.756  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 a0 00     01:46:27.473  FLUSH CACHE EXT
  61 00 00 00 08 00 00 3a 08 a4 98 40 00     01:46:27.472  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 a0 00     01:46:27.471  FLUSH CACHE EXT
  61 00 00 00 20 00 00 3a 08 a4 78 40 00     01:46:27.471  WRITE FPDMA QUEUED

Error 37 [16] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     01:46:02.688  READ FPDMA QUEUED
  61 00 00 02 28 00 00 5a c7 79 d8 40 00     01:46:02.676  WRITE FPDMA QUEUED
  61 00 00 02 20 00 00 5a c7 6a 68 40 00     01:46:02.676  WRITE FPDMA QUEUED
  61 00 00 01 78 00 00 5a c6 cf 80 40 00     01:46:02.676  WRITE FPDMA QUEUED
  61 00 00 01 58 00 00 5a c6 bd 70 40 00     01:46:02.676  WRITE FPDMA QUEUED

Error 36 [15] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: WP at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 38 00 00 5a 94 bb d8 40 00     01:46:02.134  WRITE FPDMA QUEUED
  61 00 00 00 38 00 00 5a 94 a5 90 40 00     01:46:02.134  WRITE FPDMA QUEUED
  61 00 00 00 38 00 00 5a 94 9d 10 40 00     01:46:02.134  WRITE FPDMA QUEUED
  61 00 00 00 38 00 00 5a 94 71 a0 40 00     01:46:02.134  WRITE FPDMA QUEUED
  61 00 00 00 38 00 00 5a 94 5b 10 40 00     01:46:02.134  WRITE FPDMA QUEUED

Error 35 [14] occurred at disk power-on lifetime: 3731 hours (155 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: WP at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 90 00 00 3a 04 8a 88 40 00     14:09:34.760  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 98 40 00     14:09:34.760  READ FPDMA QUEUED
  61 00 00 00 08 00 00 4e 87 15 88 40 00     14:09:34.759  WRITE FPDMA QUEUED
  ef 00 10 00 02 00 00 00 00 00 00 a0 00     14:09:34.750  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 00     14:09:34.723  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 34 [13] occurred at disk power-on lifetime: 3731 hours (155 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     14:09:34.512  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 a0 00     14:09:34.149  FLUSH CACHE EXT
  61 00 00 00 08 00 00 3a 04 8a 80 40 00     14:09:34.148  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 a0 00     14:09:34.147  FLUSH CACHE EXT
  61 00 00 00 40 00 00 3a 04 8a 40 40 00     14:09:34.147  WRITE FPDMA QUEUED

Error 33 [12] occurred at disk power-on lifetime: 3717 hours (154 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: WP at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 04 48 00 00 00 48 c0 00 40 00     00:37:52.412  WRITE FPDMA QUEUED
  61 00 00 00 a8 00 00 48 d2 5e 30 40 00     00:37:52.412  WRITE FPDMA QUEUED
  61 00 00 00 30 00 00 48 d2 5d e0 40 00     00:37:52.412  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 98 40 00     00:37:52.412  READ FPDMA QUEUED
  61 00 00 04 58 00 00 57 c4 4b 58 40 00     00:37:52.412  WRITE FPDMA QUEUED

Error 32 [11] occurred at disk power-on lifetime: 3717 hours (154 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: WP at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 20 00 00 57 df aa 30 40 00     00:37:52.110  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 57 de e7 c8 40 00     00:37:52.109  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 57 dc 09 70 40 00     00:37:52.108  WRITE FPDMA QUEUED
  61 00 00 01 a8 00 00 3a 17 f5 f8 40 00     00:37:52.106  WRITE FPDMA QUEUED
  61 00 00 00 10 00 00 4e 9a 25 c0 40 00     00:37:52.106  WRITE FPDMA QUEUED

Error 31 [10] occurred at disk power-on lifetime: 3717 hours (154 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 18 00 00 54 f4 42 48 40 00     00:37:20.514  READ FPDMA QUEUED
  60 00 00 00 20 00 00 54 f4 42 20 40 00     00:37:20.514  READ FPDMA QUEUED
  60 00 00 00 08 00 00 54 f4 42 40 40 00     00:37:20.509  READ FPDMA QUEUED
  60 00 00 00 08 00 00 53 9e 37 98 40 00     00:37:20.493  READ FPDMA QUEUED
  60 00 00 00 20 00 00 54 f4 42 00 40 00     00:37:20.482  READ FPDMA QUEUED

Error 30 [9] occurred at disk power-on lifetime: 3710 hours (154 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 53 9e 37 98 00 00  Error: UNC at LBA = 0x539e3798 = 1402877848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 53 9e 37 98 40 00     09:07:22.763  READ FPDMA QUEUED
  ef 00 10 00 03 00 00 00 00 00 00 a0 00     09:07:22.753  SET FEATURES [Enable SATA feature]
  ef 00 10 00 02 00 00 00 00 00 00 a0 00     09:07:22.744  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 00     09:07:22.717  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 00     09:07:22.673  IDENTIFY DEVICE

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4109         -
# 2  Short offline       Completed without error       00%      4108         -
# 3  Short offline       Completed: read failure       90%      4089         1400416392
# 4  Short offline       Completed: read failure       90%      4089         1400416392
# 5  Short offline       Completed: read failure       90%      4079         1400416392
# 6  Short offline       Completed: read failure       90%      4078         1400416392
# 7  Extended offline    Completed without error       00%      1809         -
# 8  Short offline       Completed without error       00%      1806         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    33 Celsius
Power Cycle Min/Max Temperature:     23/41 Celsius
Lifetime    Min/Max Temperature:     15/47 Celsius
Specified Max Operating Temperature:    34 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        30 minutes
Min/Max recommended Temperature:     14/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (71)

Index    Estimated Time   Temperature Celsius
  72    2020-05-16 21:30    36  *****************
  73    2020-05-16 22:00     ?  -
  74    2020-05-16 22:30    25  ******
  75    2020-05-16 23:00    23  ****
  76    2020-05-16 23:30    31  ************
  77    2020-05-17 00:00    32  *************
  78    2020-05-17 00:30    33  **************
  79    2020-05-17 01:00     ?  -
  80    2020-05-17 01:30    25  ******
  81    2020-05-17 02:00    25  ******
  82    2020-05-17 02:30    33  **************
  83    2020-05-17 03:00    34  ***************
 ...    ..(  3 skipped).    ..  ***************
  87    2020-05-17 05:00    34  ***************
  88    2020-05-17 05:30    35  ****************
  89    2020-05-17 06:00     ?  -
  90    2020-05-17 06:30    25  ******
  91    2020-05-17 07:00    34  ***************
  92    2020-05-17 07:30    34  ***************
  93    2020-05-17 08:00    33  **************
  94    2020-05-17 08:30    37  ******************
  95    2020-05-17 09:00    38  *******************
  96    2020-05-17 09:30    38  *******************
  97    2020-05-17 10:00    37  ******************
  98    2020-05-17 10:30     ?  -
  99    2020-05-17 11:00    25  ******
 100    2020-05-17 11:30    37  ******************
 101    2020-05-17 12:00    37  ******************
 102    2020-05-17 12:30    31  ************
 ...    ..(  2 skipped).    ..  ************
 105    2020-05-17 14:00    31  ************
 106    2020-05-17 14:30    30  ***********
 107    2020-05-17 15:00     ?  -
 108    2020-05-17 15:30    25  ******
 109    2020-05-17 16:00    25  ******
 110    2020-05-17 16:30     ?  -
 111    2020-05-17 17:00    25  ******
 112    2020-05-17 17:30    23  ****
 113    2020-05-17 18:00     ?  -
 114    2020-05-17 18:30    25  ******
 115    2020-05-17 19:00    34  ***************
 116    2020-05-17 19:30    31  ************
 117    2020-05-17 20:00    29  **********
 118    2020-05-17 20:30     ?  -
 119    2020-05-17 21:00    25  ******
 120    2020-05-17 21:30    26  *******
 121    2020-05-17 22:00    27  ********
 122    2020-05-17 22:30    34  ***************
 ...    ..(  9 skipped).    ..  ***************
   4    2020-05-18 03:30    34  ***************
   5    2020-05-18 04:00     ?  -
   6    2020-05-18 04:30    25  ******
   7    2020-05-18 05:00    36  *****************
   8    2020-05-18 05:30    35  ****************
   9    2020-05-18 06:00    36  *****************
  10    2020-05-18 06:30    33  **************
  11    2020-05-18 07:00    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  14    2020-05-18 08:30    34  ***************
  15    2020-05-18 09:00    35  ****************
  16    2020-05-18 09:30     ?  -
  17    2020-05-18 10:00    25  ******
  18    2020-05-18 10:30    23  ****
  19    2020-05-18 11:00    31  ************
  20    2020-05-18 11:30    33  **************
  21    2020-05-18 12:00    34  ***************
 ...    ..(  3 skipped).    ..  ***************
  25    2020-05-18 14:00    34  ***************
  26    2020-05-18 14:30    33  **************
  27    2020-05-18 15:00    34  ***************
  28    2020-05-18 15:30    35  ****************
  29    2020-05-18 16:00    38  *******************
  30    2020-05-18 16:30    38  *******************
  31    2020-05-18 17:00    39  ********************
  32    2020-05-18 17:30    40  *********************
 ...    ..(  7 skipped).    ..  *********************
  40    2020-05-18 21:30    40  *********************
  41    2020-05-18 22:00    39  ********************
  42    2020-05-18 22:30    40  *********************
 ...    ..(  5 skipped).    ..  *********************
  48    2020-05-19 01:30    40  *********************
  49    2020-05-19 02:00    39  ********************
 ...    ..( 12 skipped).    ..  ********************
  62    2020-05-19 08:30    39  ********************
  63    2020-05-19 09:00    35  ****************
  64    2020-05-19 09:30    34  ***************
 ...    ..(  4 skipped).    ..  ***************
  69    2020-05-19 12:00    34  ***************
  70    2020-05-19 12:30    33  **************
  71    2020-05-19 13:00    33  **************

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4            1272  ---  Lifetime Power-On Resets
0x01  0x010  4            4110  ---  Power-on Hours
0x01  0x018  6     11165168484  ---  Logical Sectors Written
0x01  0x020  6        67405541  ---  Number of Write Commands
0x01  0x028  6      7158283421  ---  Logical Sectors Read
0x01  0x030  6        27187659  ---  Number of Read Commands
0x01  0x038  6               -  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4            4104  ---  Spindle Motor Power-on Hours
0x03  0x010  4            3989  ---  Head Flying Hours
0x03  0x018  4            1661  ---  Head Load Events
0x03  0x020  4            7128  ---  Number of Reallocated Logical Sectors
0x03  0x028  4              44  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x03  0x038  4               0  ---  Number of Realloc. Candidate Logical Sectors
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4             689  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4              32  ---  Resets Between Cmd Acceptance and Completion
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               0  ---  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            9  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

...Ubuntu Rocks....

Hors ligne

#58 Le 19/05/2020, à 12:42

geole

Re : Panne de disque dur [RESOLU]

Bonjour.
Quel que soit le disque, même s'il est un SSD, il peut toujours y avoir un ennui.
Tu peux toujours commettre une grosse erreur de manipulation supprimant toutes tes données.
Donc quel que soit l'état du disque, il est nécessaire de sécuriser le disque.

Après ces 24 heures non-stop, il me semble qu'au premier coup d'oeil le disque a très  bien supporté.
Il reste juste à guetter  l'arrivée du premier secteur défectueux irrécupérable.
Je suis tenté par l'écriture d'un script qui alerterait par émail de cette arrivée.

Pour le tableau récapitulatif,    j'ai repris les deux rapports en éliminant ce qui était identique.
la premiere ligne est l'ancienne valeur,  la seconde ligne est la nouvelle valeur.
Les lignes suivantes sont mes commentaires lorsque j'ai pensé utile de le mettre.

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   051   051   006    Pre-fail  Always       -       181330119
  1 Raw_Read_Error_Rate     0x000f   083   050   006    Pre-fail  Always       -       219103530
                            indique le taux d’erreur matérielle lors de la lecture de la surface du disque
                            Le taux de réussite est actuellement meilleur à 83% au lieu de 51% 
                            Pendant la grosse réparation, il est descendu à 50%
     
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1295
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1301

  5 Reallocated_Sector_Ct   0x0033   090   090   036    Pre-fail  Always       -       6416
  5 Reallocated_Sector_Ct   0x0033   089   089   036    Pre-fail  Always       -       6984
                            On savait qu'il y avait 48 secteurs illisibles en  attente
                            D'autres ont été détectés pendant l'inspection soit pour un total de 568
                            Mais il y a encore de la réserve avant le failing-now (6984/(100-89)*(89-36)=33000
                            
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       130680578
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       133625518
                            Taux d’erreurs d’accès des têtes magnétiques:  Elles ont subit le choc avec succès.
                            Ceci est un point important. lorsque les têtes ne fonctionnent pas très bien, elles se dégradent de plus en plus vite.

  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4078 (190 57 0)
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4109 (94 50 0)
                            Donc 31 heures de fonctionnement intense.
  
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1269
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1272

188 Command_Timeout         0x0032   097   097   000    Old_age   Always       -       107376017436
188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       115966214176
                            Il n'y a plus de commandes qui ne fonctionnent pas. 100% de bonnes

190 Airflow_Temperature_Cel 0x0022   071   055   040    Old_age   Always       -       29 (Min/Max 29/34)
190 Airflow_Temperature_Cel 0x0022   066   055   040    Old_age   Always       -       34 (Min/Max 23/41)
                            Les ventilateurs sont efficaces

193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1654
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1660

194 Temperature_Celsius     0x0022   029   045   000    Old_age   Always       -       29 (0 15 0 0 0)
194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 15 0 0 0)
                            Le disque a à peine chauffé de 5 degrés

197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       48
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       48
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
                            Le reformatage a été efficace. Il reste juste à surveiller ces compteurs.
                            Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais.

240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4070h+11m+17.640s
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4100h+41m+04.215s

241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       9137893844
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       11128344380
                           Il a donc écrit en 31 heures, 22% des écritures précédentes

242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157475994
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157927137

Error 49 occurred at disk power-on lifetime: 4078 hours   Error: UNC at LBA = 0x0fffffff = 268435455
Error 49 occurred at disk power-on lifetime: 4078 hours   Error: UNC at LBA = 0x0fffffff = 268435455
                       Donc pas de nouvelles erreurs pendant cette opération de remise en état 

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#59 Le 19/05/2020, à 14:07

heronheronpetitpatapon

Re : Panne de disque dur [RESOLU]

geole a écrit :

Bonjour.
Quel que soit le disque, même s'il est un SSD, il peut toujours y avoir un ennui.
Tu peux toujours commettre une grosse erreur de manipulation supprimant toutes tes données.
Donc quel que soit l'état du disque, il est nécessaire de sécuriser le disque.

Après ces 24 heures non-stop, il me semble qu'au premier coup d'oeil le disque a très  bien supporté.
Il reste juste à guetter  l'arrivée du premier secteur défectueux irrécupérable.
Je suis tenté par l'écriture d'un script qui alerterait par émail de cette arrivée.

Pour le tableau récapitulatif,    j'ai repris les deux rapports en éliminant ce qui était identique.
la premiere ligne est l'ancienne valeur,  la seconde ligne est la nouvelle valeur.
Les lignes suivantes sont mes commentaires lorsque j'ai pensé utile de le mettre.

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   051   051   006    Pre-fail  Always       -       181330119
  1 Raw_Read_Error_Rate     0x000f   083   050   006    Pre-fail  Always       -       219103530
                            indique le taux d’erreur matérielle lors de la lecture de la surface du disque
                            Le taux de réussite est actuellement meilleur à 83% au lieu de 51% 
                            Pendant la grosse réparation, il est descendu à 50%
     
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1295
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1301

  5 Reallocated_Sector_Ct   0x0033   090   090   036    Pre-fail  Always       -       6416
  5 Reallocated_Sector_Ct   0x0033   089   089   036    Pre-fail  Always       -       6984
                            On savait qu'il y avait 48 secteurs illisibles en  attente
                            D'autres ont été détectés pendant l'inspection soit pour un total de 568
                            Mais il y a encore de la réserve avant le failing-now (6984/(100-89)*(89-36)=33000
                            
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       130680578
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       133625518
                            Taux d’erreurs d’accès des têtes magnétiques:  Elles ont subit le choc avec succès.
                            Ceci est un point important. lorsque les têtes ne fonctionnent pas très bien, elles se dégradent de plus en plus vite.

  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4078 (190 57 0)
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       4109 (94 50 0)
                            Donc 31 heures de fonctionnement intense.
  
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1269
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1272

188 Command_Timeout         0x0032   097   097   000    Old_age   Always       -       107376017436
188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       115966214176
                            Il n'y a plus de commandes qui ne fonctionnent pas. 100% de bonnes

190 Airflow_Temperature_Cel 0x0022   071   055   040    Old_age   Always       -       29 (Min/Max 29/34)
190 Airflow_Temperature_Cel 0x0022   066   055   040    Old_age   Always       -       34 (Min/Max 23/41)
                            Les ventilateurs sont efficaces

193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1654
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1660

194 Temperature_Celsius     0x0022   029   045   000    Old_age   Always       -       29 (0 15 0 0 0)
194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 15 0 0 0)
                            Le disque a à peine chauffé de 5 degrés

197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       48
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       48
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
                            Le reformatage a été efficace. Il reste juste à surveiller ces compteurs.
                            Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais.

240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4070h+11m+17.640s
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       4100h+41m+04.215s

241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       9137893844
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       11128344380
                           Il a donc écrit en 31 heures, 22% des écritures précédentes

242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157475994
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7157927137

Error 49 occurred at disk power-on lifetime: 4078 hours   Error: UNC at LBA = 0x0fffffff = 268435455
Error 49 occurred at disk power-on lifetime: 4078 hours   Error: UNC at LBA = 0x0fffffff = 268435455
                       Donc pas de nouvelles erreurs pendant cette opération de remise en état 

Waaahhhooouuu quelle analyse, je suis bleuffé! Merci beaucoup! Ok donc si je comprend bien, d'parès ce que tu décris ici :

Geole a écrit :

197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       48
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       48
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
                            Le reformatage a été efficace. Il reste juste à surveiller ces compteurs.
                            Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais.

Si dans quelques semaines je refais un teste et qu'il me sort 70 erreurs au lieu des 48 actuellement présentent, le disque ne doit alors plus être considéré comme fiable!
mais est-ce qu'il y'a un moyen d'isoler ces 48 secteurs de les regroupers dans un zone spécifique pour que j'évite d'écrire des données dessus, quite à perdre de l'espace ?
Bon je vais quand même me commander un gros SSD Barracuda de 2 To de chez Seagate, je serais tranquille!


...Ubuntu Rocks....

Hors ligne

#60 Le 19/05/2020, à 14:39

geole

Re : Panne de disque dur [RESOLU]

Dans le passé il y avait 48 secteurs illisibles donc potentiellement 48 fichiers illisibles , l'opération de formatage les a expédiés dans une zone dédiée au secours avec les autres qui y étaient arrivés par précaution.. Actuellement il y a zéro secteur  illisible (La seconde ligne des compteurs)

Dernière modification par geole (Le 19/05/2020, à 14:41)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#61 Le 19/05/2020, à 14:43

heronheronpetitpatapon

Re : Panne de disque dur [RESOLU]

geole a écrit :

Dans le passé il y avait 48 secteurs illisibles donc potentiellement 48 fichiers illisibles , l'opération de formatage les a expédiés dans une zone dédiée au secours avec les autres qui y étaient arrivés par précaution.. Actuellement il y a zéro secteur  illisible (La seconde ligne des compteurs)

Super j'avais du mal à comprendre merci!


...Ubuntu Rocks....

Hors ligne