Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 15/02/2020, à 13:24

Benamoul

[Résolu] Installation scanner en wifi pour Epson XP-3100

Bonjour,
Je viens d'installer la partie imprimante sans problème d'une Epson CX-3100 configurée en réseau avec IP fixe.
Là où, ça coince, c'est la partie scanner. J'ai bien installé Image Scan pour Linux grâce à l'install.sh fourni dans le bundle du site officiel.
Mais je ne trouve pas le fichier /etc/sane.d/epkowa.conf pour signaler l'ip (manip que j'ai réussi sans problème pour une autre Epson sur un autre ordinateur). En essayant avec Simple Scan, XSane ou Image Scan, le scanner reste introuvable.
Mon pare-feu est inactif
Merci à toute la communauté Ubuntu pour votre soutien

Dernière modification par Benamoul (Le 16/02/2020, à 13:36)

Hors ligne

#2 Le 15/02/2020, à 13:28

xubu1957

Re : [Résolu] Installation scanner en wifi pour Epson XP-3100


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 15/02/2020, à 22:04

Benamoul

Re : [Résolu] Installation scanner en wifi pour Epson XP-3100

Désolé pour cette précipitation. Voici la réponse à la commande

 cat /etc/lsb-release && uname -i && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.6 LTS"
x86_64
adm cdrom sudo dip plugdev lpadmin sambashare
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Voici la réponse à la commande

dpkg -l | grep sane
ii  libsane:amd64                               1.0.25+git20150528-1ubuntu2.16.04.1             amd64        API library for scanners
ii  libsane-common                              1.0.25+git20150528-1ubuntu2.16.04.1             all          API library for scanners -- documentation and support files
ii  libsane-dev                                 1.0.25+git20150528-1ubuntu2.16.04.1             amd64        API development library for scanners [development files]
ii  libsane-extras:amd64                        1.0.22.3ubuntu1                                 amd64        API library for scanners -- extra backends
ii  libsane-extras-common                       1.0.22.3ubuntu1                                 amd64        API library for scanners -- documentation and support files
rc  libsane-hpaio:amd64                         3.16.3+repack0-1                                amd64        HP SANE backend for multi-function peripherals
ii  sane-utils                                  1.0.25+git20150528-1ubuntu2.16.04.1             amd64        API library for scanners -- utilities
ii  xsane                                       0.999-3ubuntu1                                  amd64        featureful graphical frontend for SANE (Scanner Access Now Easy)
ii  xsane-common                                0.999-3ubuntu1                                  all          xsane architecture independent files

Voici la réponse à la commande

sane-find-scanner
  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x058f/0x6362 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x0bda/0x8189 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 002:001: Access denied (insufficient permissions)
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

Voici la réponse à la commande

sudo sane-find-scanner
  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Overflow
found USB scanner (vendor=0x0bda, product=0x8189 [RTL8187B_WLAN_Adapter]) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

Voici la réponse à la commande

scanimage -L
device `epson2:net:192.168.0.16' is a Epson PID flatbed scanner

Voici la réponse à la commande

ls /etc/sane.d/
abaton.conf          canon_dr.conf   dell1600n_net.conf  fujitsu.conf    hpsj5s.conf     matsushita.conf  pie.conf         sceptre.conf   teco2.conf
agfafocus.conf       canon_pp.conf   dll.conf            genesys.conf    hs2p.conf       microtek2.conf   pixma.conf       sharp.conf     teco3.conf
apple.conf           cardscan.conf   dll.conf.dpkg-old   geniusvp2.conf  ibm.conf        microtek.conf    plustek.conf     sm3840.conf    test.conf
artec.conf           coolscan2.conf  dll.d               gphoto2.conf    kodakaio.conf   mustek.conf      plustek_pp.conf  snapscan.conf  u12.conf
artec_eplus48u.conf  coolscan3.conf  dmc.conf            gt68xx.conf     kodak.conf      mustek_pp.conf   qcam.conf        sp15c.conf     umax1220u.conf
avision.conf         coolscan.conf   epjitsu.conf        hp3900.conf     leo.conf        mustek_usb.conf  ricoh.conf       st400.conf     umax.conf
bh.conf              dc210.conf      epson2.conf         hp4200.conf     lexmark.conf    nec.conf         rts8891.conf     stv680.conf    umax_pp.conf
canon630u.conf       dc240.conf      epson.conf          hp5400.conf     ma1509.conf     net.conf         s9036.conf       tamarack.conf  v4l.conf
canon.conf           dc25.conf       epsonds.conf        hp.conf         magicolor.conf  p5.conf          saned.conf       teco1.conf     xerox_mfp.conf

Voici la réponse à la commande

cat /etc/sane.d/dll.conf
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#

# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
epson
epkowa
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
hpaio

Voici la réponse à la commande

ls  /lib/udev/rules.d | grep libsane
60-libsane.rules

Merci pour votre aide

Hors ligne

#4 Le 15/02/2020, à 22:38

ylag

Re : [Résolu] Installation scanner en wifi pour Epson XP-3100

Bonsoir,

Sous toute réserve, d'après le retour de scanimage -L:

device `epson2:net:192.168.0.16' is a Epson PID flatbed scanner

Peut-être essayer de modifier le fichier /etc/sane.d/epson2.conf de façon à déclarer spécifiquement l'adresse IP de la machine sur ton réseau?
Il faudrait y commenter la ligne net autodiscovery pour qu'elle devienne:

# net autodiscovery

...puis ajouter au-dessous la ligne:

net 192.168.0.16

Si ça ne marche pas, restaurer simplement le fichier à l'état original.

A+

Dernière modification par ylag (Le 15/02/2020, à 22:40)

Hors ligne

#5 Le 16/02/2020, à 13:13

Benamoul

Re : [Résolu] Installation scanner en wifi pour Epson XP-3100

Merci pour cette proposition.
Après avoir réalisé la modification du fichier /etc/sane.d/epson2.conf avec les droits d'administration, mon problème n'est toujours pas résolu : ni Simple Scan, ni XSane et ni Image Scan ne détecte le scanner.
Doit ont aller voir du côté de /etc/imagescan/imagescan.conf ?

# /etc/imagescan/imagescan.conf -- Image Scan configuration
# Refer to the documentation for details on the configuration options
# for the software.  Plugins should come with their own documentation
# if they have configuration options.
#
# Lines starting with a # or a ; are comments.  Comments must be on a
# line of their own.  End-of-line comments are not supported.

[devices]

; myscanner.udi    = esci:networkscan://192.168.0.2:1865
; myscanner.vendor = Epson
; myscanner.model  = DS-5500

Merci

Hors ligne

#6 Le 16/02/2020, à 13:18

ylag

Re : [Résolu] Installation scanner en wifi pour Epson XP-3100

Bonjour,

Benamoul a écrit :

Après avoir réalisé la modification du fichier /etc/sane.d/epson2.conf avec les droits d'administration, mon problème n'est toujours pas résolu

Dans ce cas, n'oublie pas de remettre ce fichier à son état initial.


Doit ont aller voir du côté de /etc/imagescan/imagescan.conf ?

Je ne sais pas, désolé...

A+

Dernière modification par ylag (Le 16/02/2020, à 13:18)

Hors ligne

#7 Le 16/02/2020, à 13:27

Benamoul

Re : [Résolu] Installation scanner en wifi pour Epson XP-3100

Problème résolu par moi-même en modifiant le fichier /etc/imagescan/imagescan.conf.

ATTENTION ! Seul Image Scan est utilisable avec cette méthode

On supprime les ; après la ligne [devices] et on insère la bonne adresse ip (les lignes suivantes sont optionnelles pour renseigner la marque et le modèle de l'imprimante utilisée). Solution trouvée sur le site officiel d'Epson.

# /etc/imagescan/imagescan.conf -- Image Scan configuration
# Refer to the documentation for details on the configuration options
# for the software.  Plugins should come with their own documentation
# if they have configuration options.
#
# Lines starting with a # or a ; are comments.  Comments must be on a
# line of their own.  End-of-line comments are not supported.

[devices]

myscanner.udi    = esci:networkscan://192.168.0.16:1865
myscanner.vendor = Epson
myscanner.model  = DS-5500

Merci pour votre contribution

Dernière modification par Benamoul (Le 16/02/2020, à 13:39)

Hors ligne

#8 Le 16/02/2020, à 13:29

Benamoul

Re : [Résolu] Installation scanner en wifi pour Epson XP-3100

Solution Scanner Epson

Hors ligne