#1 Le 18/08/2019, à 19:28
- mxm_novice
Blender ne supporte plus ma carte graphique Intel
Bonjour à tous,
Je suis sous Lubuntu 18.04 et aujourd'hui c'est la première fois que Blender m'affiche une erreur X11 au démarrage (qui échoue donc) :
~$ blender
/run/user/1000/snap.blender/gvfs/ non-existent directory
Received X11 Error:
error code: 179
request code: 155
minor code: 34
error text: GLXBadFBConfig
Error! Unsupported graphics card or driver.
A graphics card and driver with support for OpenGL 3.3 or higher is required.
The program will now close.Pour info, j'avais installé Blender via Logiciel et voici la carte graphique utilisée :
lshw -C display
*-display
description: VGA compatible controller
produit: Core Processor Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 02
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:31 mémoire:d0000000-d03fffff mémoire:c0000000-cfffffff portE/S:5058(taille=8) mémoire:c0000-dffffJe vous mets aussi le Xorg.0.log
[ 8.359]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 8.359] X Protocol Version 11, Revision 0
[ 8.359] Build Operating System: Linux 4.4.0-148-generic x86_64 Ubuntu
[ 8.359] Current Operating System: Linux mxm 5.0.0-25-generic #26~18.04.1-Ubuntu SMP Thu Aug 1 13:51:02 UTC 2019 x86_64
[ 8.359] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-25-generic root=UUID=a8c60c52-b04a-4c32-a2ee-8d97773b668c ro quiet splash vt.handoff=1
[ 8.359] Build Date: 03 June 2019 08:10:35AM
[ 8.359] xorg-server 2:1.19.6-1ubuntu4.3 (For technical support please see http://www.ubuntu.com/support)
[ 8.359] Current version of pixman: 0.34.0
[ 8.359] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.359] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.360] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 18 19:16:02 2019
[ 8.361] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.362] (==) No Layout section. Using the first Screen section.
[ 8.362] (==) No screen section available. Using defaults.
[ 8.362] (**) |-->Screen "Default Screen Section" (0)
[ 8.362] (**) | |-->Monitor "<default monitor>"
[ 8.362] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.362] (==) Automatically adding devices
[ 8.362] (==) Automatically enabling devices
[ 8.362] (==) Automatically adding GPU devices
[ 8.362] (==) Automatically binding GPU devices
[ 8.362] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.374] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 8.374] Entry deleted from font path.
[ 8.374] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 8.374] Entry deleted from font path.
[ 8.374] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 8.374] Entry deleted from font path.
[ 8.375] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 8.375] Entry deleted from font path.
[ 8.375] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 8.375] Entry deleted from font path.
[ 8.375] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 8.375] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.375] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.375] (II) Loader magic: 0x55b25009b020
[ 8.375] (II) Module ABI versions:
[ 8.375] X.Org ANSI C Emulation: 0.4
[ 8.375] X.Org Video Driver: 23.0
[ 8.375] X.Org XInput driver : 24.1
[ 8.375] X.Org Server Extension : 10.0
[ 8.376] (++) using VT number 7
[ 8.376] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.377] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.389] (--) PCI:*(0:0:2:0) 8086:0046:103c:172a rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005058/8, BIOS @ 0x????????/131072
[ 8.390] (II) LoadModule: "glx"
[ 8.390] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.408] (II) Module glx: vendor="X.Org Foundation"
[ 8.408] compiled for 1.19.6, module version = 1.0.0
[ 8.408] ABI class: X.Org Server Extension, version 10.0
[ 8.408] (==) Matched modesetting as autoconfigured driver 0
[ 8.408] (==) Matched fbdev as autoconfigured driver 1
[ 8.408] (==) Matched vesa as autoconfigured driver 2
[ 8.408] (==) Assigned the driver to the xf86ConfigLayout
[ 8.408] (II) LoadModule: "modesetting"
[ 8.408] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.408] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.408] compiled for 1.19.6, module version = 1.19.6
[ 8.408] Module class: X.Org Video Driver
[ 8.408] ABI class: X.Org Video Driver, version 23.0
[ 8.408] (II) LoadModule: "fbdev"
[ 8.408] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 8.408] (II) Module fbdev: vendor="X.Org Foundation"
[ 8.408] compiled for 1.19.3, module version = 0.4.4
[ 8.408] Module class: X.Org Video Driver
[ 8.408] ABI class: X.Org Video Driver, version 23.0
[ 8.409] (II) LoadModule: "vesa"
[ 8.409] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.409] (II) Module vesa: vendor="X.Org Foundation"
[ 8.409] compiled for 1.19.3, module version = 2.3.4
[ 8.409] Module class: X.Org Video Driver
[ 8.409] ABI class: X.Org Video Driver, version 23.0
[ 8.409] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.409] (II) FBDEV: driver for framebuffer: fbdev
[ 8.409] (II) VESA: driver for VESA chipsets: vesa
[ 8.456] (II) modeset(0): using drv /dev/dri/card0
[ 8.456] (WW) Falling back to old probe method for fbdev
[ 8.456] (II) Loading sub module "fbdevhw"
[ 8.456] (II) LoadModule: "fbdevhw"
[ 8.456] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 8.456] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 8.456] compiled for 1.19.6, module version = 0.0.2
[ 8.456] ABI class: X.Org Video Driver, version 23.0
[ 8.456] (WW) Falling back to old probe method for vesa
[ 8.456] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.456] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 8.456] (==) modeset(0): RGB weight 888
[ 8.456] (==) modeset(0): Default visual is TrueColor
[ 8.456] (II) Loading sub module "glamoregl"
[ 8.456] (II) LoadModule: "glamoregl"
[ 8.456] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 8.471] (II) Module glamoregl: vendor="X.Org Foundation"
[ 8.471] compiled for 1.19.6, module version = 1.0.0
[ 8.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.471] (II) glamor: OpenGL accelerated X.org driver based.
[ 8.536] (II) glamor: EGL version 1.4:
[ 8.546] (II) modeset(0): glamor initialized
[ 8.550] (II) modeset(0): Output eDP-1 has no monitor section
[ 8.554] (II) modeset(0): Output VGA-1 has no monitor section
[ 8.555] (II) modeset(0): Output HDMI-1 has no monitor section
[ 8.556] (II) modeset(0): Output DP-1 has no monitor section
[ 8.557] (II) modeset(0): Output HDMI-2 has no monitor section
[ 8.562] (II) modeset(0): Output HDMI-3 has no monitor section
[ 8.562] (II) modeset(0): Output DP-2 has no monitor section
[ 8.562] (II) modeset(0): Output DP-3 has no monitor section
[ 8.566] (II) modeset(0): EDID for output eDP-1
[ 8.566] (II) modeset(0): Manufacturer: CMO Model: 1463 Serial#: 0
[ 8.566] (II) modeset(0): Year: 2009 Week: 41
[ 8.566] (II) modeset(0): EDID Version: 1.4
[ 8.566] (II) modeset(0): Digital Display Input
[ 8.566] (II) modeset(0): 6 bits per channel
[ 8.566] (II) modeset(0): Digital interface is DisplayPort
[ 8.566] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 8.566] (II) modeset(0): Gamma: 2.20
[ 8.566] (II) modeset(0): No DPMS capabilities specified
[ 8.566] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 8.566] (II) modeset(0): First detailed timing is preferred mode
[ 8.566] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 8.566] (II) modeset(0): redX: 0.575 redY: 0.360 greenX: 0.350 greenY: 0.575
[ 8.566] (II) modeset(0): blueX: 0.155 blueY: 0.111 whiteX: 0.313 whiteY: 0.329
[ 8.566] (II) modeset(0): Manufacturer's mask: 0
[ 8.566] (II) modeset(0): Supported detailed timing:
[ 8.566] (II) modeset(0): clock: 69.3 MHz Image Size: 309 x 174 mm
[ 8.566] (II) modeset(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1480 h_border: 0
[ 8.566] (II) modeset(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 780 v_border: 0
[ 8.566] (II) modeset(0): Supported detailed timing:
[ 8.566] (II) modeset(0): clock: 46.3 MHz Image Size: 309 x 174 mm
[ 8.566] (II) modeset(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1480 h_border: 0
[ 8.566] (II) modeset(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 780 v_border: 0
[ 8.566] (II) modeset(0): Unknown vendor-specific block 2
[ 8.566] (II) modeset(0): EDID (in hex):
[ 8.566] (II) modeset(0): 00ffffffffffff000daf631400000000
[ 8.566] (II) modeset(0): 29130104951f11780a59e5935c599327
[ 8.566] (II) modeset(0): 1c505400000001010101010101010101
[ 8.566] (II) modeset(0): 010101010101121b567250000c301022
[ 8.566] (II) modeset(0): 260035ae1000001a1312567250000c30
[ 8.566] (II) modeset(0): 1022260035ae1000001a000000000000
[ 8.566] (II) modeset(0): 00000000000000000000000000000002
[ 8.566] (II) modeset(0): 000c44f20a3c64130f1b6900000000e3
[ 8.567] (II) modeset(0): Printing probed modes for output eDP-1
[ 8.567] (II) modeset(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1480 768 770 776 780 +hsync -vsync (46.8 kHz eP)
[ 8.567] (II) modeset(0): Modeline "1366x768"x40.1 46.27 1366 1382 1416 1480 768 770 776 780 +hsync -vsync (31.3 kHz e)
[ 8.567] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 8.567] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 8.567] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 8.567] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 8.567] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 8.567] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 8.567] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 8.567] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 8.567] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 8.567] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 8.567] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 8.567] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 8.567] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 8.567] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 8.567] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 8.567] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 8.567] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 8.567] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 8.567] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 8.567] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 8.567] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 8.567] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 8.567] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 8.567] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 8.567] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 8.567] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 8.567] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 8.567] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 8.567] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 8.567] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 8.567] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 8.567] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 8.567] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 8.568] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 8.568] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 8.568] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 8.568] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 8.568] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 8.568] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 8.568] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 8.568] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 8.568] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 8.568] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 8.568] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 8.568] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 8.568] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 8.568] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 8.568] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 8.568] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 8.568] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 8.568] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 8.568] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 8.568] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 8.568] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 8.568] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 8.568] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 8.568] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 8.569] (II) modeset(0): EDID for output VGA-1
[ 8.571] (II) modeset(0): EDID for output HDMI-1
[ 8.571] (II) modeset(0): EDID for output DP-1
[ 8.572] (II) modeset(0): EDID for output HDMI-2
[ 8.581] (II) modeset(0): EDID for output HDMI-3
[ 8.581] (II) modeset(0): EDID for output DP-2
[ 8.581] (II) modeset(0): EDID for output DP-3
[ 8.581] (II) modeset(0): Output eDP-1 connected
[ 8.581] (II) modeset(0): Output VGA-1 disconnected
[ 8.581] (II) modeset(0): Output HDMI-1 disconnected
[ 8.581] (II) modeset(0): Output DP-1 disconnected
[ 8.581] (II) modeset(0): Output HDMI-2 disconnected
[ 8.581] (II) modeset(0): Output HDMI-3 disconnected
[ 8.581] (II) modeset(0): Output DP-2 disconnected
[ 8.581] (II) modeset(0): Output DP-3 disconnected
[ 8.581] (II) modeset(0): Using exact sizes for initial modes
[ 8.581] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[ 8.581] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.581] (==) modeset(0): DPI set to (96, 96)
[ 8.581] (II) Loading sub module "fb"
[ 8.581] (II) LoadModule: "fb"
[ 8.581] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.583] (II) Module fb: vendor="X.Org Foundation"
[ 8.583] compiled for 1.19.6, module version = 1.0.0
[ 8.583] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.583] (II) UnloadModule: "fbdev"
[ 8.583] (II) Unloading fbdev
[ 8.583] (II) UnloadSubModule: "fbdevhw"
[ 8.583] (II) Unloading fbdevhw
[ 8.583] (II) UnloadModule: "vesa"
[ 8.583] (II) Unloading vesa
[ 8.583] (==) Depth 24 pixmap format is 32 bpp
[ 8.620] (==) modeset(0): Backing store enabled
[ 8.620] (==) modeset(0): Silken mouse enabled
[ 8.620] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 8.690] (==) modeset(0): DPMS enabled
[ 8.690] (II) modeset(0): [DRI2] Setup complete
[ 8.690] (II) modeset(0): [DRI2] DRI driver: i965
[ 8.690] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 8.690] (--) RandR disabled
[ 8.695] (II) SELinux: Disabled on system
[ 8.714] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 8.714] (II) AIGLX: enabled GLX_ARB_create_context
[ 8.714] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 8.714] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 8.714] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 8.714] (II) AIGLX: enabled GLX_SGI_swap_control
[ 8.714] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 8.714] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 8.714] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 8.714] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 8.715] (II) AIGLX: Loaded and initialized i965
[ 8.715] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.728] (II) modeset(0): Damage tracking initialized
[ 8.728] (II) modeset(0): Setting screen physical size to 361 x 203
[ 8.796] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 8.797] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.797] (II) LoadModule: "libinput"
[ 8.797] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 8.803] (II) Module libinput: vendor="X.Org Foundation"
[ 8.803] compiled for 1.19.6, module version = 0.27.1
[ 8.803] Module class: X.Org XInput Driver
[ 8.803] ABI class: X.Org XInput driver, version 24.1
[ 8.803] (II) Using input driver 'libinput' for 'Power Button'
[ 8.803] (**) Power Button: always reports core events
[ 8.803] (**) Option "Device" "/dev/input/event2"
[ 8.803] (**) Option "_source" "server/udev"
[ 8.804] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.804] (II) event2 - Power Button: device is a keyboard
[ 8.804] (II) event2 - Power Button: device removed
[ 8.841] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 8.841] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.841] (**) Option "xkb_model" "pc105"
[ 8.841] (**) Option "xkb_layout" "fr"
[ 8.841] (**) Option "xkb_variant" "azerty"
[ 8.876] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.876] (II) event2 - Power Button: device is a keyboard
[ 8.877] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 8.877] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.877] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.877] (**) Video Bus: always reports core events
[ 8.877] (**) Option "Device" "/dev/input/event9"
[ 8.877] (**) Option "_source" "server/udev"
[ 8.878] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 8.878] (II) event9 - Video Bus: device is a keyboard
[ 8.878] (II) event9 - Video Bus: device removed
[ 8.897] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16/event9"
[ 8.897] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 8.897] (**) Option "xkb_model" "pc105"
[ 8.897] (**) Option "xkb_layout" "fr"
[ 8.898] (**) Option "xkb_variant" "azerty"
[ 8.898] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 8.898] (II) event9 - Video Bus: device is a keyboard
[ 8.899] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 8.899] (II) No input driver specified, ignoring this device.
[ 8.899] (II) This device may have been added with another device file.
[ 8.900] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 8.900] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 8.900] (II) Using input driver 'libinput' for 'Sleep Button'
[ 8.900] (**) Sleep Button: always reports core events
[ 8.900] (**) Option "Device" "/dev/input/event0"
[ 8.900] (**) Option "_source" "server/udev"
[ 8.900] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.900] (II) event0 - Sleep Button: device is a keyboard
[ 8.900] (II) event0 - Sleep Button: device removed
[ 8.942] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 8.942] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 8.942] (**) Option "xkb_model" "pc105"
[ 8.942] (**) Option "xkb_layout" "fr"
[ 8.942] (**) Option "xkb_variant" "azerty"
[ 8.943] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.943] (II) event0 - Sleep Button: device is a keyboard
[ 8.944] (II) config/udev: Adding input device HP Webcam [2 MP Macro]: HP Webc (/dev/input/event17)
[ 8.944] (**) HP Webcam [2 MP Macro]: HP Webc: Applying InputClass "libinput keyboard catchall"
[ 8.944] (II) Using input driver 'libinput' for 'HP Webcam [2 MP Macro]: HP Webc'
[ 8.944] (**) HP Webcam [2 MP Macro]: HP Webc: always reports core events
[ 8.944] (**) Option "Device" "/dev/input/event17"
[ 8.944] (**) Option "_source" "server/udev"
[ 8.945] (II) event17 - HP Webcam [2 MP Macro]: HP Webc: is tagged by udev as: Keyboard
[ 8.945] (II) event17 - HP Webcam [2 MP Macro]: HP Webc: device is a keyboard
[ 8.945] (II) event17 - HP Webcam [2 MP Macro]: HP Webc: device removed
[ 9.001] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input24/event17"
[ 9.001] (II) XINPUT: Adding extended input device "HP Webcam [2 MP Macro]: HP Webc" (type: KEYBOARD, id 9)
[ 9.001] (**) Option "xkb_model" "pc105"
[ 9.001] (**) Option "xkb_layout" "fr"
[ 9.001] (**) Option "xkb_variant" "azerty"
[ 9.002] (II) event17 - HP Webcam [2 MP Macro]: HP Webc: is tagged by udev as: Keyboard
[ 9.002] (II) event17 - HP Webcam [2 MP Macro]: HP Webc: device is a keyboard
[ 9.003] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10)
[ 9.003] (II) No input driver specified, ignoring this device.
[ 9.003] (II) This device may have been added with another device file.
[ 9.003] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event11)
[ 9.003] (II) No input driver specified, ignoring this device.
[ 9.003] (II) This device may have been added with another device file.
[ 9.004] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event12)
[ 9.004] (II) No input driver specified, ignoring this device.
[ 9.004] (II) This device may have been added with another device file.
[ 9.004] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event13)
[ 9.004] (II) No input driver specified, ignoring this device.
[ 9.004] (II) This device may have been added with another device file.
[ 9.005] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event14)
[ 9.005] (II) No input driver specified, ignoring this device.
[ 9.005] (II) This device may have been added with another device file.
[ 9.005] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event15)
[ 9.007] (II) No input driver specified, ignoring this device.
[ 9.007] (II) This device may have been added with another device file.
[ 9.007] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event16)
[ 9.007] (II) No input driver specified, ignoring this device.
[ 9.007] (II) This device may have been added with another device file.
[ 9.008] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event4)
[ 9.008] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[ 9.008] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'
[ 9.008] (**) SIGMACHIP Usb Mouse: always reports core events
[ 9.008] (**) Option "Device" "/dev/input/event4"
[ 9.008] (**) Option "_source" "server/udev"
[ 9.066] (II) event4 - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 9.066] (II) event4 - SIGMACHIP Usb Mouse: device is a pointer
[ 9.066] (II) event4 - SIGMACHIP Usb Mouse: device removed
[ 9.101] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1C4F:0034.0002/input/input13/event4"
[ 9.101] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 10)
[ 9.101] (**) Option "AccelerationScheme" "none"
[ 9.101] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0
[ 9.101] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[ 9.101] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[ 9.162] (II) event4 - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 9.162] (II) event4 - SIGMACHIP Usb Mouse: device is a pointer
[ 9.162] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse0)
[ 9.163] (II) No input driver specified, ignoring this device.
[ 9.163] (II) This device may have been added with another device file.
[ 9.163] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 9.163] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.163] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 9.163] (**) AT Translated Set 2 keyboard: always reports core events
[ 9.163] (**) Option "Device" "/dev/input/event3"
[ 9.163] (**) Option "_source" "server/udev"
[ 9.164] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 9.164] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 9.164] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 9.201] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 9.201] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 9.201] (**) Option "xkb_model" "pc105"
[ 9.201] (**) Option "xkb_layout" "fr"
[ 9.201] (**) Option "xkb_variant" "azerty"
[ 9.202] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 9.202] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 9.203] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event5)
[ 9.203] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[ 9.203] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[ 9.203] (**) PS/2 Generic Mouse: always reports core events
[ 9.203] (**) Option "Device" "/dev/input/event5"
[ 9.203] (**) Option "_source" "server/udev"
[ 9.203] (II) event5 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 9.203] (II) event5 - PS/2 Generic Mouse: device is a pointer
[ 9.203] (II) event5 - PS/2 Generic Mouse: device removed
[ 9.253] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event5"
[ 9.253] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 12)
[ 9.253] (**) Option "AccelerationScheme" "none"
[ 9.253] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[ 9.253] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 9.253] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 9.254] (II) event5 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[ 9.254] (II) event5 - PS/2 Generic Mouse: device is a pointer
[ 9.255] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 9.255] (II) No input driver specified, ignoring this device.
[ 9.255] (II) This device may have been added with another device file.
[ 9.255] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 9.255] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 9.255] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 9.255] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 9.255] (**) Option "Device" "/dev/input/event6"
[ 9.255] (**) Option "_source" "server/udev"
[ 9.256] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 9.256] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 9.256] (II) event6 - SynPS/2 Synaptics TouchPad: device removed
[ 9.305] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event6"
[ 9.305] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 9.305] (**) Option "AccelerationScheme" "none"
[ 9.306] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 9.306] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 9.306] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 9.306] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 9.306] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 9.307] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 9.307] (II) No input driver specified, ignoring this device.
[ 9.307] (II) This device may have been added with another device file.
[ 9.308] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 9.308] (II) No input driver specified, ignoring this device.
[ 9.308] (II) This device may have been added with another device file.
[ 9.308] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 9.308] (II) No input driver specified, ignoring this device.
[ 9.308] (II) This device may have been added with another device file.
[ 9.311] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[ 9.311] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 9.311] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 9.311] (**) HP WMI hotkeys: always reports core events
[ 9.311] (**) Option "Device" "/dev/input/event8"
[ 9.311] (**) Option "_source" "server/udev"
[ 9.312] (II) event8 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 9.312] (II) event8 - HP WMI hotkeys: device is a keyboard
[ 9.312] (II) event8 - HP WMI hotkeys: device is a switch device
[ 9.312] (II) event8 - HP WMI hotkeys: device removed
[ 9.348] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event8"
[ 9.348] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 9.348] (**) Option "xkb_model" "pc105"
[ 9.348] (**) Option "xkb_layout" "fr"
[ 9.348] (**) Option "xkb_variant" "azerty"
[ 9.349] (II) event8 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 9.349] (II) event8 - HP WMI hotkeys: device is a keyboard
[ 9.349] (II) event8 - HP WMI hotkeys: device is a switch device
[ 83.403] (II) event4 - SIGMACHIP Usb Mouse: Enabling spurious button debouncing, see https://wayland.freedesktop.org/libinput/doc/1.10.4/button_debouncing.html for detailsJ'ai l'impression que la solution est assez simple mais étant encore novice... Si quelqu'un pouvait m'éclairer 
Je vous remercie, bonne soirée.
Dernière modification par mxm_novice (Le 22/08/2019, à 11:37)
Hors ligne
#2 Le 18/08/2019, à 19:31
- michel_04
Re : Blender ne supporte plus ma carte graphique Intel
Bonjour.
Tu peux donner le retour de :
snap listA+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#3 Le 18/08/2019, à 19:33
- mxm_novice
Re : Blender ne supporte plus ma carte graphique Intel
~$ snap list
Nom Version Révision Suivi Éditeur Notes
blender 2.80 33 stable blenderfoundation✓ classicHors ligne
#4 Le 18/08/2019, à 20:05
- michel_04
Re : Blender ne supporte plus ma carte graphique Intel
Tu m'étonnes.
On supprime ce snap :
sudo snap remove blenderPuis on installe le paquet deb blender des dépôts :
sudo apt install blenderSi tu veux installer une version plus récente, passe par le site de Blender ou par le ppa:thomas-schiex/blender (voir la page blender de la doc).
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#5 Le 18/08/2019, à 20:36
- mxm_novice
Re : Blender ne supporte plus ma carte graphique Intel
Problème résolu. Merci beaucoup !
Hors ligne