#1 Le 30/04/2019, à 19:12
- Barbipède07
Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Bonjour à toutes et à tous,
J'utilise Ubuntu depuis 2ans environ, je ne m'y connais pas trop mais bon:
Je n'avais pas de problême de boot avec la version 16.04 puis j'ai installé la version 18.04. Depuis, quand je démarre après avoir sélectionné le disk (je suis en dual boot avec windows 7) il y a un écran violet, j’attends quelque secondes et le haut de l'écran se pixelise de toutes les couleurs et le pc plante, aucune touche ne répond! Alors je force le shut down, je reboot et ça passe en mode recovery et puis ça démarre normalement...
J'ai cherché des posts correspondant à ce problème en vain, essayé de désactiver Wayland, fait un Boot Repair USB : no way!
Il y a bien un rapport qui à été édité, sauf que je ne sais pas comment le coller dans le présent post!!......
Voilà! Merci d'avance pour votre aide
Dernière modification par Barbipède07 (Le 08/05/2019, à 21:04)
Hors ligne
#2 Le 30/04/2019, à 19:17
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Bonjour,
Lorsque tu démarres en recovery, ouvre un terminal et donne le retour de :
ubuntu-drivers devices
Hors ligne
#3 Le 30/04/2019, à 20:02
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Voici:
== /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0 ==
modalias : pci:v000014E4d00004727sv00001028sd00000010bc02sc80i00
vendor : Broadcom Limited
model : BCM4313 802.11bgn Wireless Network Adapter (Inspiron M5010 / XPS 8300)
driver : bcmwl-kernel-source - distro non-free
(J'ai fait un copié-collé du retour... tu peux me dire comment on colle une image dans la bulle de discussion au passage?..)
Hors ligne
#4 Le 01/05/2019, à 09:07
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Bon, je pensais à un problème de pilote graphique mais c’est pas ça.
Donne le retour de :
dmesg -l err
(J'ai fait un copié-collé du retour... tu peux me dire comment on colle une image dans la bulle de discussion au passage?..)
Pour les retours de commande.
Pour insérer une image.
Dernière modification par nany (Le 01/05/2019, à 10:35)
Hors ligne
#5 Le 01/05/2019, à 10:15
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Merci pour les infos.
Voici donc le retour demandé:
dmesg -l err
[ 1530.416685] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=91702 end=91703) time 1752 us, min 763, max 767, scanline start 750, end 42
Hors ligne
#6 Le 01/05/2019, à 10:33
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Et aussi le résultat du boot repair au passage:
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>........S.9...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 1611208 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/bootia32.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 208,844 208,782 7 NTFS / exFAT / HPFS
/dev/sda2 208,845 58,386,841 58,177,997 7 NTFS / exFAT / HPFS
/dev/sda3 58,388,478 976,771,071 918,382,594 5 Extended
/dev/sda5 58,388,480 836,628,479 778,240,000 83 Linux
/dev/sda6 968,628,224 976,771,071 8,142,848 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1.9 GiB, 2019557376 bytes, 3944448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 128 3,944,447 3,944,320 6 FAT16
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 A8562B9A562B6870 ntfs
/dev/sda2 00AA63EDAA63DE22 ntfs
/dev/sda5 a3092188-018b-4e19-8bb4-3babd4ae9a83 ext4
/dev/sda6 b4a2a18c-63fa-4670-8e69-7cc7e829db25 swap
/dev/sdb1 F082-ABCE vfat
/dev/zram0 e701e27a-8d5d-4f9c-9dcb-6d4c18e42fb5 swap
/dev/zram1 6416a4b4-7d51-4cac-b2ca-019a0ba303b5 swap
/dev/zram2 dc2eb309-967d-4f73-8012-ed3b6cdaadce swap
/dev/zram3 9721bec8-2721-47f4-bc73-66996e4b1e60 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Apr 30 17:00 ata-ST9500423AS_6WS05D2Q -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 30 17:00 ata-ST9500423AS_6WS05D2Q-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 30 17:00 ata-ST9500423AS_6WS05D2Q-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 30 17:00 ata-ST9500423AS_6WS05D2Q-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 30 17:00 ata-ST9500423AS_6WS05D2Q-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 30 17:00 ata-ST9500423AS_6WS05D2Q-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Apr 30 16:59 ata-TSSTcorp_DVD+_-RW_TS-U633J_R7216GVC401JEB -> ../../sr0
lrwxrwxrwx 1 root root 9 Apr 30 16:59 usb-JetFlash_Transcend_2GB_9NM4G0ZA-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 30 16:59 usb-JetFlash_Transcend_2GB_9NM4G0ZA-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Apr 30 17:00 wwn-0x5000c50045b4d794 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 30 17:00 wwn-0x5000c50045b4d794-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 30 17:00 wwn-0x5000c50045b4d794-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 30 17:00 wwn-0x5000c50045b4d794-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 30 17:00 wwn-0x5000c50045b4d794-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 30 17:00 wwn-0x5000c50045b4d794-part6 -> ../../sda6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 a3092188-018b-4e19-8bb4-3babd4ae9a83
else
search --no-floppy --fs-uuid --set=root a3092188-018b-4e19-8bb4-3babd4ae9a83
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=C
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a3092188-018b-4e19-8bb4-3babd4ae9a83' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 a3092188-018b-4e19-8bb4-3babd4ae9a83
else
search --no-floppy --fs-uuid --set=root a3092188-018b-4e19-8bb4-3babd4ae9a83
fi
linux /boot/vmlinuz-4.15.0-48-generic root=UUID=a3092188-018b-4e19-8bb4-3babd4ae9a83 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-48-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-a3092188-018b-4e19-8bb4-3babd4ae9a83' {
menuentry 'Ubuntu, with Linux 4.15.0-48-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-48-generic-advanced-a3092188-018b-4e19-8bb4-3babd4ae9a83' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 a3092188-018b-4e19-8bb4-3babd4ae9a83
else
search --no-floppy --fs-uuid --set=root a3092188-018b-4e19-8bb4-3babd4ae9a83
fi
echo 'Loading Linux 4.15.0-48-generic ...'
linux /boot/vmlinuz-4.15.0-48-generic root=UUID=a3092188-018b-4e19-8bb4-3babd4ae9a83 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-48-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-48-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-48-generic-recovery-a3092188-018b-4e19-8bb4-3babd4ae9a83' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 a3092188-018b-4e19-8bb4-3babd4ae9a83
else
search --no-floppy --fs-uuid --set=root a3092188-018b-4e19-8bb4-3babd4ae9a83
fi
echo 'Loading Linux 4.15.0-48-generic ...'
linux /boot/vmlinuz-4.15.0-48-generic root=UUID=a3092188-018b-4e19-8bb4-3babd4ae9a83 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-48-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 a3092188-018b-4e19-8bb4-3babd4ae9a83
else
search --no-floppy --fs-uuid --set=root a3092188-018b-4e19-8bb4-3babd4ae9a83
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 a3092188-018b-4e19-8bb4-3babd4ae9a83
else
search --no-floppy --fs-uuid --set=root a3092188-018b-4e19-8bb4-3babd4ae9a83
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-A8562B9A562B6870' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 A8562B9A562B6870
else
search --no-floppy --fs-uuid --set=root A8562B9A562B6870
fi
parttool ${root} hidden-
chainloader +1
}
menuentry 'Windows 7 (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-00AA63EDAA63DE22' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 00AA63EDAA63DE22
else
search --no-floppy --fs-uuid --set=root 00AA63EDAA63DE22
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=a3092188-018b-4e19-8bb4-3babd4ae9a83 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=b4a2a18c-63fa-4670-8e69-7cc7e829db25 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
347.967006683 = 373.626728448 boot/grub/grub.cfg 1
391.595825195 = 420.472815616 boot/grub/i386-pc/core.img 1
332.872283936 = 357.418893312 boot/vmlinuz-4.15.0-48-generic 1
332.872283936 = 357.418893312 vmlinuz 1
28.396480560 = 30.490488832 boot/initrd.img-4.15.0-48-generic 4
28.396480560 = 30.490488832 initrd.img 4
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Boot-Repair-Disk session" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^32bit session
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
label ubnentry2
menu label ^32bit session (failsafe)
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper noapic noapm nodma nomce nolapic nomodeset nosmp vga=normal --
label ubnentry3
menu label Boot-Repair-Disk session
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
ADDITIONAL INFORMATION :
=================== log of boot-repair 20190430_1659 ===================
boot-repair version : 4ppa62
boot-sav version : 4ppa62
boot-sav-extra version : 4ppa62
glade2script version : 3.2.3~ppa4
Partition 1 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
Partition 3 does not start on physical sector boundary.
boot-repair is executed in live-session (Boot-Repair-Disk 32bit 1oct2017, zesty, Ubuntu, i686)
CPU op-mode(s): 32-bit, 64-bit
initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda1:Windows 7:Windows:chain
/dev/sda5:Ubuntu 18.04.2 LTS (18.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="A8562B9A562B6870" TYPE="ntfs" PARTUUID="a7f9ee5f-01"
/dev/sda2: UUID="00AA63EDAA63DE22" TYPE="ntfs" PARTUUID="a7f9ee5f-02"
/dev/sda5: UUID="a3092188-018b-4e19-8bb4-3babd4ae9a83" TYPE="ext4" PARTUUID="a7f9ee5f-05"
/dev/sdb1: SEC_TYPE="msdos" UUID="F082-ABCE" TYPE="vfat" PARTUUID="0010eb76-01"
/dev/loop0: TYPE="squashfs"
/dev/sda6: UUID="b4a2a18c-63fa-4670-8e69-7cc7e829db25" TYPE="swap" PARTUUID="a7f9ee5f-06"
/dev/zram0: UUID="e701e27a-8d5d-4f9c-9dcb-6d4c18e42fb5" TYPE="swap"
/dev/zram1: UUID="6416a4b4-7d51-4cac-b2ca-019a0ba303b5" TYPE="swap"
/dev/zram2: UUID="dc2eb309-967d-4f73-8012-ed3b6cdaadce" TYPE="swap"
/dev/zram3: UUID="9721bec8-2721-47f4-bc73-66996e4b1e60" TYPE="swap"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda2.
Partition 1 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
Partition 3 does not start on physical sector boundary.
Partition 1 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
Partition 3 does not start on physical sector boundary.
=================== sda5/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Apr 26 13:34 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Mar 18 16:11 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12693 Mar 18 16:11 10_linux
-rwxr-xr-x 1 root root 11298 Mar 18 16:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Mar 18 16:11 30_os-prober
-rwxr-xr-x 1 root root 1418 Jan 13 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jan 13 2017 40_custom
-rwxr-xr-x 1 root root 216 Jan 13 2017 41_custom
-rw-r--r-- 1 root root 483 Jan 13 2017 README
=================== sda5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda5recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda5.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 63 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA ST9500423AS:;
1:32.3kB:107MB:107MB:ntfs::boot;
2:107MB:29.9GB:29.8GB:ntfs::;
3:29.9GB:500GB:470GB:::;
5:29.9GB:428GB:398GB:ext4::;
6:496GB:500GB:4169MB:linux-swap(v1)::;
BYT;
/dev/sdb:2020MB:scsi:512:512:msdos:JetFlash Transcend 2GB:;
1:65.5kB:2020MB:2019MB:fat16::boot;
BYT;
/dev/zram3:513MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:513MB:513MB:linux-swap(v1)::;
BYT;
/dev/zram1:513MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:513MB:513MB:linux-swap(v1)::;
BYT;
/dev/zram2:513MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:513MB:513MB:linux-swap(v1)::;
BYT;
/dev/zram0:513MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:513MB:513MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 642.9M
sda disk 465.8G
sda1 part ntfs 102M
sda2 part ntfs 27.8G
sda3 part 1K
sda5 part ext4 371.1G
sda6 part swap 3.9G
sdb disk 1.9G
sdb1 part vfat 1.9G
sr0 rom 1024M
zram0 disk 489.5M
zram1 disk 489.5M
zram2 disk 489.5M
zram3 disk 489.5M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda5 1 0 0 /mnt/boot-sav/sda5
sda6 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
zram0 0 0 0 [SWAP]
zram1 0 0 0 [SWAP]
zram2 0 0 0 [SWAP]
zram3 0 0 0 [SWAP]
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1979816k,nr_inodes=199519,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=401028k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=743)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=401024k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw,relatime,stripe=32748,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdc-wdm0 cdc-wdm1 cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 dvd dvdrw ecryptfs fb0 fd freefall full fuse gpiochip0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sdb sdb1 serial sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...|
00000020 00 00 00 00 80 00 80 00 88 2f 03 00 00 00 00 00 |........./......|
00000030 ee 15 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 70 68 2b 56 9a 2b 56 a8 |........ph+V.+V.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 cd 2f 03 00 |........?..../..|
00000020 00 00 00 00 80 00 80 00 c8 b9 77 03 00 00 00 00 |..........w.....|
00000030 88 f6 09 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 22 de 63 aa ed 63 aa 00 |........".c..c..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
Partition 1 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
Partition 3 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 392M 6.3M 386M 2% /run
/dev/sdb1 vfat 1.9G 787M 1.2G 41% /cdrom
/dev/loop0 squashfs 643M 643M 0 100% /rofs
/cow overlay 2.0G 4.0M 2.0G 1% /
tmpfs tmpfs 2.0G 0 2.0G 0% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs tmpfs 2.0G 4.0K 2.0G 1% /tmp
tmpfs tmpfs 392M 4.0K 392M 1% /run/user/999
/dev/sda1 fuseblk 102M 25M 78M 24% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 28G 25G 3.4G 88% /mnt/boot-sav/sda2
/dev/sda5 ext4 366G 294G 54G 85% /mnt/boot-sav/sda5
=================== fdisk -l:
Disk /dev/loop0: 642.9 MiB, 674103296 bytes, 1316608 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xa7f9ee5f
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 63 208844 208782 102M 7 HPFS/NTFS/exFAT
/dev/sda2 208845 58386841 58177997 27.8G 7 HPFS/NTFS/exFAT
/dev/sda3 58388478 976771071 918382594 437.9G 5 Extended
/dev/sda5 58388480 836628479 778240000 371.1G 83 Linux
/dev/sda6 968628224 976771071 8142848 3.9G 82 Linux swap / Solaris
Disk /dev/sdb: 1.9 GiB, 2019557376 bytes, 3944448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0010eb76
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 128 3944447 3944320 1.9G 6 FAT16
Disk /dev/zram0: 489.5 MiB, 513310720 bytes, 125320 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 489.5 MiB, 513310720 bytes, 125320 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 489.5 MiB, 513310720 bytes, 125320 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 489.5 MiB, 513310720 bytes, 125320 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
ping: google.com: Temporary failure in name resolution
=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub2 of sda5 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
Quantity of real Windows: 1
WinSE in sda2
Copied Win boot files from sda1 to sda2
lspci: Unable to load libkmod resources: error -12
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller [1028:0492]
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
*******
grub-install --version
grub-install (GRUB) 2.02-2ubuntu8.13,grub-install (GRUB) 2.
Reinstall the GRUB of sda5 into the MBR of sda
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
chroot /mnt/boot-sav/sda5 update-grub
Sourcing file `/etc/default/grub'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.15.0-48-generic
Found initrd image: /boot/initrd.img-4.15.0-48-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 on /dev/sda1
Found Windows 7 on /dev/sda2
Unhide GRUB boot menu in sda5/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
The boot files of [Ubuntu 18.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
Hors ligne
#7 Le 01/05/2019, à 18:04
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Ok. Une seule erreur mais ça nous met peut-être sur la bonne piste.
Donne le retour de :
grep "X_D" /etc/default/grub
Hors ligne
#8 Le 01/05/2019, à 19:41
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Ok la voici:
grep "X_D" /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
Hors ligne
#9 Le 01/05/2019, à 19:50
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Bien, on va essayer quelque chose.
Passe cette commande :
sudo sed -i 's/splash/splash i915.enable_psr=0/' /etc/default/grub && sudo update-grub
Puis redémarre et dis-nous comment ça se passe.
Hors ligne
#10 Le 01/05/2019, à 19:55
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
ayé!
sudo sed -i 's/splash/splash i915.enable_psr=0/' /etc/default/grub && sudo update-grub
[sudo] Mot de passe de tomevlann :
Sourcing file `/etc/default/grub'
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-48-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-48-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Windows 7 trouvé sur /dev/sda1
Windows 7 trouvé sur /dev/sda2
fait
Hors ligne
#11 Le 01/05/2019, à 19:58
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
ayé!
Tu as redémarré ? Tout s’est bien passé ?
Hors ligne
#12 Le 01/05/2019, à 20:01
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Non, idem...
Hors ligne
#13 Le 01/05/2019, à 20:07
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Arf !
À tout hasard, donne le retour de :
dmesg
Hors ligne
#14 Le 01/05/2019, à 20:18
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Voilà:
dmesg
[ 0.000000] Linux version 4.15.0-48-generic (buildd@lgw01-amd64-038) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #51-Ubuntu SMP Wed Apr 3 08:26:08 UTC 2019 (Ubuntu 4.15.0-48.51-generic 4.15.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000caa28fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caa29000-0x00000000caa6cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caa6d000-0x00000000cadb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Latitude E6320/055XK7, BIOS A08 10/18/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0C8000000 mask FFC000000 write-back
[ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 120000000 mask FF0000000 write-back
[ 0.000000] 7 base 12E000000 mask FFE000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 3984M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000f1af0-0x000f1aff] mapped at [(ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1d3fffff]
[ 0.000000] Base memory trampoline at [(ptrval)] 8d000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x1cfe2000, 0x1cfe2fff] PGTABLE
[ 0.000000] BRK [0x1cfe3000, 0x1cfe3fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33df5000-0x35ef1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000CAFFDE18 000074 (v01 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 0x00000000CAF87D98 0000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CAF66018 008461 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[ 0.000000] ACPI: FACS 0x00000000CAFE4E40 000040
[ 0.000000] ACPI: FACS 0x00000000CAFE4D40 000040
[ 0.000000] ACPI: APIC 0x00000000CAFFCF18 0000CC (v02 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x00000000CAFE5D18 000032 (v02 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CAF88A98 0002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
[ 0.000000] ACPI: MCFG 0x00000000CAFE5C98 00003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CAFE5C18 000038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
[ 0.000000] ACPI: BOOT 0x00000000CAFE5B98 000028 (v01 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CAF7D018 00094E (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
[ 0.000000] ACPI: SSDT 0x00000000CAF7C018 000996 (v01 PmRef CpuPm 00003000 INTL 20090903)
[ 0.000000] ACPI: SLIC 0x00000000CAF86C18 000176 (v03 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3946MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x1cfe4000, 0x1cfe4fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.000000] HighMem [mem 0x00000000375fe000-0x000000012dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000caa28fff]
[ 0.000000] node 0: [mem 0x00000000caa6d000-0x00000000cadb6fff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012dffffff]
[ 0.000000] Reserved but unavailable: 87804 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012dffffff]
[ 0.000000] On node 0 totalpages: 1018116
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] Normal zone: 2175 pages used for memmap
[ 0.000000] Normal zone: 222206 pages, LIFO batch:31
[ 0.000000] HighMem zone: 791926 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x00000000cba00000-0x00000000cf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x438 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93068 r0 d29812 u122880
[ 0.000000] pcpu-alloc: s93068 r0 d29812 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1015901
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-48-generic root=UUID=a3092188-018b-4e19-8bb4-3babd4ae9a83 ro quiet splash i915.enable_psr=0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0012e000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3974000K/4072464K available (8852K kernel code, 892K rwdata, 3480K rodata, 1096K init, 860K bss, 98464K reserved, 0K cma-reserved, 3167704K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xdcd04000 - 0xdce16000 (1096 kB)
.data : 0xdc8a52f8 - 0xdccf1180 (4399 kB)
.text : 0xdc000000 - 0xdc8a52f8 (8852 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ************************************************************
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ** **
[ 0.000000] ** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
[ 0.000000] ** Your performance will increase dramatically if you **
[ 0.000000] ** switch to a 64-bit kernel! **
[ 0.000000] ** **
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ************************************************************
[ 0.000000] ftrace: allocating 37912 entries in 75 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 2304, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 4718592 bytes of page_ext
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2195.187 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.37 BogoMIPS (lpj=8780748)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] mce: CPU supports 7 MCE banks
[ 0.028006] CPU0: Thermal monitoring enabled (TM1)
[ 0.028016] process: using mwait in idle threads
[ 0.028021] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.028022] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.028025] Spectre V2 : Mitigation: Full generic retpoline
[ 0.028025] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.028026] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028032] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.028033] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.028035] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.028192] Freeing SMP alternatives memory: 36K
[ 0.030233] TSC deadline timer enabled
[ 0.030236] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.030315] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.030340] ... version: 3
[ 0.030340] ... bit width: 48
[ 0.030341] ... generic registers: 4
[ 0.030342] ... value mask: 0000ffffffffffff
[ 0.030343] ... max period: 00007fffffffffff
[ 0.030344] ... fixed-purpose events: 3
[ 0.030344] ... event mask: 000000070000000f
[ 0.030389] Hierarchical SRCU implementation.
[ 0.031633] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.031653] smp: Bringing up secondary CPUs ...
[ 0.031756] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.031757] x86: Booting SMP configuration:
[ 0.031758] .... node #0, CPUs: #1
[ 0.004000] Initializing CPU#1
[ 0.032116] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.032117] #2
[ 0.004000] Initializing CPU#2
[ 0.034474] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.034474] #3
[ 0.004000] Initializing CPU#3
[ 0.036068] smp: Brought up 1 node, 4 CPUs
[ 0.036068] smpboot: Max logical packages: 2
[ 0.036068] smpboot: Total of 4 processors activated (17561.49 BogoMIPS)
[ 0.039528] devtmpfs: initialized
[ 0.040308] evm: security.selinux
[ 0.040309] evm: security.SMACK64
[ 0.040310] evm: security.SMACK64EXEC
[ 0.040310] evm: security.SMACK64TRANSMUTE
[ 0.040311] evm: security.SMACK64MMAP
[ 0.040311] evm: security.apparmor
[ 0.040312] evm: security.ima
[ 0.040313] evm: security.capability
[ 0.040330] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
[ 0.040330] reboot: Dell Latitude E6320 series board detected. Selecting PCI-method for reboots.
[ 0.040330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040330] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.040330] pinctrl core: initialized pinctrl subsystem
[ 0.040330] RTC time: 18:58:48, date: 05/01/19
[ 0.040330] NET: Registered protocol family 16
[ 0.040440] audit: initializing netlink subsys (disabled)
[ 0.040446] audit: type=2000 audit(1556737128.040:1): state=initialized audit_enabled=0 res=1
[ 0.040446] EISA bus registered
[ 0.040446] cpuidle: using governor ladder
[ 0.040446] cpuidle: using governor menu
[ 0.040446] Simple Boot Flag at 0xf3 set to 0x1
[ 0.040446] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040446] ACPI: bus type PCI registered
[ 0.040446] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040446] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040446] PCI: not using MMCONFIG
[ 0.040928] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.040933] PCI: PCI BIOS revision 2.10 entry at 0xfce72, last bus=10
[ 0.040934] PCI: Using configuration type 1 for base access
[ 0.041031] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.044006] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.044101] ACPI: Added _OSI(Module Device)
[ 0.044103] ACPI: Added _OSI(Processor Device)
[ 0.044104] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.044105] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.044106] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.044109] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.044110] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.049014] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.060435] ACPI: Dynamic OEM Table Load:
[ 0.060444] ACPI: SSDT 0x00000000F14ED800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 0.060840] ACPI: Dynamic OEM Table Load:
[ 0.060845] ACPI: SSDT 0x00000000F1B3A800 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 0.061136] ACPI: Dynamic OEM Table Load:
[ 0.061140] ACPI: SSDT 0x00000000F14CFA00 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 0.061975] ACPI: EC: EC started
[ 0.061976] ACPI: EC: interrupt blocked
[ 0.063125] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.063127] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.063129] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.063130] ACPI: Interpreter enabled
[ 0.063158] ACPI: (supports S0 S3 S4 S5)
[ 0.063159] ACPI: Using IOAPIC for interrupt routing
[ 0.063191] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.063656] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.063657] PCI: Using MMCONFIG for extended config space
[ 0.063663] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.063868] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.079358] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.079364] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.079407] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.079976] PCI host bridge to bus 0000:00
[ 0.079979] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.079981] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.079983] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.079985] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[ 0.079987] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.079989] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.079998] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.080112] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.080125] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.080131] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.080136] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.080261] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.080288] pci 0000:00:16.0: reg 0x10: [mem 0xe2eb0000-0xe2eb000f 64bit]
[ 0.080369] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.080461] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.080483] pci 0000:00:19.0: reg 0x10: [mem 0xe2e00000-0xe2e1ffff]
[ 0.080492] pci 0000:00:19.0: reg 0x14: [mem 0xe2e80000-0xe2e80fff]
[ 0.080501] pci 0000:00:19.0: reg 0x18: [io 0x4080-0x409f]
[ 0.080566] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.080658] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.080681] pci 0000:00:1a.0: reg 0x10: [mem 0xe2e70000-0xe2e703ff]
[ 0.080771] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.080863] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.080888] pci 0000:00:1b.0: reg 0x10: [mem 0xe2e60000-0xe2e63fff 64bit]
[ 0.080970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.081072] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.081212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.081323] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.081465] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.081577] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.081718] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.081828] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.081969] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.082081] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.082223] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.082333] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.082357] pci 0000:00:1d.0: reg 0x10: [mem 0xe2e50000-0xe2e503ff]
[ 0.082446] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.082541] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.082736] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.082756] pci 0000:00:1f.2: reg 0x10: [io 0x40d0-0x40d7]
[ 0.082764] pci 0000:00:1f.2: reg 0x14: [io 0x40c0-0x40c3]
[ 0.082772] pci 0000:00:1f.2: reg 0x18: [io 0x40b0-0x40b7]
[ 0.082781] pci 0000:00:1f.2: reg 0x1c: [io 0x40a0-0x40a3]
[ 0.082789] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.082798] pci 0000:00:1f.2: reg 0x24: [mem 0xe2e40000-0xe2e407ff]
[ 0.082843] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.082929] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.082949] pci 0000:00:1f.3: reg 0x10: [mem 0xe2e30000-0xe2e300ff 64bit]
[ 0.082972] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.083142] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.083288] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[ 0.083346] pci 0000:02:00.0: reg 0x10: [mem 0xe2d00000-0xe2d03fff 64bit]
[ 0.083447] pci 0000:02:00.0: enabling Extended Tags
[ 0.083569] pci 0000:02:00.0: supports D1 D2
[ 0.083571] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.092094] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.092100] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
[ 0.092195] acpiphp: Slot [1] registered
[ 0.092202] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 0.092207] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.092211] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
[ 0.092218] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 0.092276] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.092281] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.092284] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
[ 0.092291] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.094105] pci 0000:0a:00.0: [1217:8221] type 00 class 0x080501
[ 0.094183] pci 0000:0a:00.0: reg 0x10: [mem 0xe2c20000-0xe2c201ff]
[ 0.094539] pci 0000:0a:00.0: supports D1 D2
[ 0.094541] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105771] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 0.105779] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
[ 0.105829] pci_bus 0000:00: on NUMA node 0
[ 0.107441] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.107505] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.107567] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.107627] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.107687] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.107747] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.107808] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.107868] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.110009] ACPI: EC: interrupt unblocked
[ 0.110016] ACPI: EC: event unblocked
[ 0.110024] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.110026] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.110320] SCSI subsystem initialized
[ 0.110337] libata version 3.00 loaded.
[ 0.110337] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.110337] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.110337] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.110337] vgaarb: loaded
[ 0.110337] ACPI: bus type USB registered
[ 0.110337] usbcore: registered new interface driver usbfs
[ 0.110337] usbcore: registered new interface driver hub
[ 0.110337] usbcore: registered new device driver usb
[ 0.110337] EDAC MC: Ver: 3.0.0
[ 0.112042] PCI: Using ACPI for IRQ routing
[ 0.112304] PCI: pci_cache_line_size set to 64 bytes
[ 0.112397] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 0.112399] e820: reserve RAM buffer [mem 0xcaa29000-0xcbffffff]
[ 0.112401] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[ 0.112403] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.112404] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[ 0.112513] NetLabel: Initializing
[ 0.112514] NetLabel: domain hash size = 128
[ 0.112515] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.112529] NetLabel: unlabeled traffic allowed by default
[ 0.112549] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.112549] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.114570] clocksource: Switched to clocksource hpet
[ 0.125563] VFS: Disk quotas dquot_6.6.0
[ 0.125584] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.125696] AppArmor: AppArmor Filesystem Enabled
[ 0.125727] pnp: PnP ACPI init
[ 0.125910] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.125917] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.125972] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.125974] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.125976] system 00:01: [io 0xffff] has been reserved
[ 0.125978] system 00:01: [io 0xffff] has been reserved
[ 0.125980] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.125982] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.125984] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.125989] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126017] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.126046] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.126910] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.126937] pnp 00:05: Plug and Play ACPI device, IDs DLL0492 PNP0f13 (active)
[ 0.127134] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.127136] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.127138] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.127140] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.127143] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.127145] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.127147] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.127149] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.127151] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.127154] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.127159] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129782] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[ 0.129784] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[ 0.129790] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.129797] pnp: PnP ACPI: found 8 devices
[ 0.129800] PnPBIOS: Disabled by ACPI PNP
[ 0.166781] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.166846] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.166864] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.166871] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
[ 0.166884] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 0.166887] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.166894] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
[ 0.166899] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 0.166908] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.166911] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.166918] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
[ 0.166923] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.166931] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 0.166938] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
[ 0.166952] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.166954] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.166956] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.166957] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.166959] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.166961] pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
[ 0.166963] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.166965] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
[ 0.166967] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 0.166969] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.166970] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
[ 0.166972] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.166974] pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
[ 0.167066] NET: Registered protocol family 2
[ 0.167227] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.167245] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.167260] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.167289] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.167294] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.167341] NET: Registered protocol family 1
[ 0.167354] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.169590] PCI: CLS 64 bytes, default 64
[ 0.169632] Unpacking initramfs...
[ 0.791943] Freeing initrd memory: 33780K
[ 0.792258] Scanning for low memory corruption every 60 seconds
[ 0.793043] Initialise system trusted keyrings
[ 0.793054] Key type blacklist registered
[ 0.793100] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.794563] zbud: loaded
[ 0.794931] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.795127] fuse init (API version 7.26)
[ 0.797111] Key type asymmetric registered
[ 0.797112] Asymmetric key parser 'x509' registered
[ 0.797126] bounce: pool size: 64 pages
[ 0.797141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.797187] io scheduler noop registered
[ 0.797188] io scheduler deadline registered
[ 0.797246] io scheduler cfq registered (default)
[ 0.798372] intel_idle: MWAIT substates: 0x21120
[ 0.798373] intel_idle: v0.4.1 model 0x2A
[ 0.798568] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.799038] ACPI: AC Adapter [AC] (on-line)
[ 0.799105] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.799140] ACPI: Lid Switch [LID]
[ 0.799184] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.799211] ACPI: Power Button [PBTN]
[ 0.799250] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.799260] ACPI: Sleep Button [SBTN]
[ 0.799298] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.799323] ACPI: Power Button [PWRF]
[ 0.800312] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.800596] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.800598] ACPI: Thermal Zone [THM] (25 C)
[ 0.800756] isapnp: Scanning for PnP cards...
[ 0.800780] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.805040] Linux agpgart interface v0.103
[ 0.808649] loop: module loaded
[ 0.808953] libphy: Fixed MDIO Bus: probed
[ 0.808955] tun: Universal TUN/TAP device driver, 1.6
[ 0.809002] PPP generic driver version 2.4.2
[ 0.809069] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.809073] ehci-pci: EHCI PCI platform driver
[ 0.809426] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.809436] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.809454] ehci-pci 0000:00:1a.0: debug port 2
[ 0.813358] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.813381] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe2e70000
[ 0.815368] ACPI: Battery Slot [BAT0] (battery present)
[ 0.828039] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.828097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.828100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.828102] usb usb1: Product: EHCI Host Controller
[ 0.828104] usb usb1: Manufacturer: Linux 4.15.0-48-generic ehci_hcd
[ 0.828106] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.850343] hub 1-0:1.0: USB hub found
[ 0.850351] hub 1-0:1.0: 2 ports detected
[ 0.937626] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.937634] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.937647] ehci-pci 0000:00:1d.0: debug port 2
[ 0.941560] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.941574] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe2e50000
[ 0.956034] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.956083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.956085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956087] usb usb2: Product: EHCI Host Controller
[ 0.956089] usb usb2: Manufacturer: Linux 4.15.0-48-generic ehci_hcd
[ 0.956090] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.981077] hub 2-0:1.0: USB hub found
[ 0.981085] hub 2-0:1.0: 2 ports detected
[ 1.024515] ehci-platform: EHCI generic platform driver
[ 1.024534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.024538] ohci-pci: OHCI PCI platform driver
[ 1.024551] ohci-platform: OHCI generic platform driver
[ 1.024561] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.024649] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.024801] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.025069] i8042: Warning: Keylock active
[ 1.026356] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.026362] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.026602] mousedev: PS/2 mouse device common for all mice
[ 1.027020] rtc_cmos 00:02: RTC can wake from S4
[ 1.027183] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.027220] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.027230] i2c /dev entries driver
[ 1.027237] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 1.027366] device-mapper: uevent: version 1.0.3
[ 1.027449] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.027475] platform eisa.0: Probing EISA bus 0
[ 1.027478] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.027480] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.027483] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.027485] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.027487] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.027489] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.027491] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.027493] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.027495] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.027497] platform eisa.0: EISA: Detected 0 cards
[ 1.027502] cpufreq_nforce2: No nForce2 chipset
[ 1.027506] intel_pstate: Intel P-state driver initializing
[ 1.027837] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.111302] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.111569] NET: Registered protocol family 10
[ 1.117328] Segment Routing with IPv6
[ 1.117361] NET: Registered protocol family 17
[ 1.117407] Key type dns_resolver registered
[ 1.155019] isapnp: No Plug & Play device found
[ 1.155650] microcode: sig=0x206a7, pf=0x10, revision=0x2e
[ 1.155768] microcode: Microcode Update Driver: v2.2.
[ 1.155773] Using IPI No-Shortcut mode
[ 1.155784] sched_clock: Marking stable (1155752281, 0)->(1139659210, 16093071)
[ 1.156055] ACPI: Battery Slot [BAT2] (battery absent)
[ 1.156109] registered taskstats version 1
[ 1.156123] Loading compiled-in X.509 certificates
[ 1.162482] Loaded X.509 cert 'Build time autogenerated kernel key: 64ced6e07433240192e360796f30ec7e54995018'
[ 1.162504] zswap: loaded using pool lzo/zbud
[ 1.167938] Key type big_key registered
[ 1.167943] Key type trusted registered
[ 1.170557] Key type encrypted registered
[ 1.170561] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.170565] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.170572] ima: Allocated hash algorithm: sha1
[ 1.170588] evm: HMAC attrs: 0x1
[ 1.172710] Magic number: 3:420:998
[ 1.172742] system 00:00: hash matches
[ 1.172841] rtc_cmos 00:02: setting system clock to 2019-05-01 18:58:49 UTC (1556737129)
[ 1.172905] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.172906] EDD information not available.
[ 1.174220] Freeing unused kernel image memory: 1096K
[ 1.200236] Write protecting the kernel text: 8856k
[ 1.200300] Write protecting the kernel read-only data: 3504k
[ 1.200301] NX-protecting the kernel data: 7528k
[ 1.200428] x86/mm: PCI BIOS W+X mapping 96 pages
[ 1.200490] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.200527] x86/mm: Checking user space page tables
[ 1.200548] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.228032] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.325304] pps_core: LinuxPPS API ver. 1 registered
[ 1.325306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.328208] sdhci: Secure Digital Host Controller Interface driver
[ 1.328209] sdhci: Copyright(c) Pierre Ossman
[ 1.352560] PTP clock support registered
[ 1.352823] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
[ 1.354748] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.354925] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
[ 1.360094] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.363119] ahci 0000:00:1f.2: version 3.0
[ 1.363379] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.373043] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.373044] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.373491] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
[ 1.373496] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.388498] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.388501] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.388855] hub 1-1:1.0: USB hub found
[ 1.388903] hub 1-1:1.0: 6 ports detected
[ 1.421107] scsi host0: ahci
[ 1.421325] scsi host1: ahci
[ 1.421541] scsi host2: ahci
[ 1.421705] scsi host3: ahci
[ 1.421860] scsi host4: ahci
[ 1.422002] scsi host5: ahci
[ 1.422077] ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 24
[ 1.422080] ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 24
[ 1.422082] ata3: DUMMY
[ 1.422085] ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 24
[ 1.422088] ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 24
[ 1.422092] ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 24
[ 1.422348] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.522152] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.522155] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.522577] hub 2-1:1.0: USB hub found
[ 1.522649] hub 2-1:1.0: 8 ports detected
[ 1.532547] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.630468] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:2e:6e:43
[ 1.630471] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.630528] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 2041FF-0FF
[ 1.631857] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.736460] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.757859] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.768217] ata1.00: ATA-8: ST9500423AS, 0005DEM1, max UDMA/133
[ 1.768220] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.807931] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.808245] ata1.00: configured for UDMA/133
[ 1.808579] scsi 0:0:0:0: Direct-Access ATA ST9500423AS DEM1 PQ: 0 ANSI: 5
[ 1.809014] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.809016] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.809019] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.809030] sd 0:0:0:0: [sda] Write Protect is off
[ 1.809032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.809052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.812041] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[ 1.824081] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.824095] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[ 1.867771] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.868338] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.943764] usb 2-1.6: New USB device found, idVendor=413c, idProduct=818d
[ 1.943771] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.943776] usb 2-1.6: Product: DW5550
[ 1.943780] usb 2-1.6: Manufacturer: Dell
[ 1.943784] usb 2-1.6: SerialNumber: 0DA6B74145569D30
[ 2.064066] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[ 2.120723] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.132109] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633J, D800, max UDMA/100
[ 2.147017] ata2.00: configured for UDMA/100
[ 2.155865] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633J D800 PQ: 0 ANSI: 5
[ 2.197919] random: fast init done
[ 2.201486] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
[ 2.201489] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.201491] usb 2-1.8: Product: 5880
[ 2.201493] usb 2-1.8: Manufacturer: Broadcom Corp
[ 2.201494] usb 2-1.8: SerialNumber: 0123456789ABCD
[ 2.201709] usb 2-1.8: config 0 descriptor??
[ 2.201773] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.201797] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.201828] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.238191] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.238193] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.238446] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.238566] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.551837] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.761396] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[ 2.775233] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.848233] clocksource: Switched to clocksource tsc
[ 2.867945] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.183886] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.828678] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.440026] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.460856] random: crng init done
[ 6.460858] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.583321] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 6.600100] systemd[1]: Detected architecture x86.
[ 6.623049] systemd[1]: Set hostname to <tomevlann-Latitude-E6320>.
[ 8.462774] systemd[1]: Created slice System Slice.
[ 8.462938] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.463040] systemd[1]: Listening on udev Control Socket.
[ 8.463313] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.463336] systemd[1]: Reached target User and Group Name Lookups.
[ 8.463353] systemd[1]: Reached target Remote File Systems.
[ 8.463445] systemd[1]: Listening on Syslog Socket.
[ 9.075579] lp: driver loaded but no devices found
[ 9.137817] ppdev: user-space parallel port driver
[ 9.166787] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 9.274205] parport_pc 00:04: [io 0x0378-0x037b]
[ 9.276045] parport_pc 00:04: [irq 5]
[ 9.277552] parport_pc 00:04: activated
[ 9.277556] parport_pc 00:04: reported by Plug and Play ACPI
[ 9.530572] systemd-journald[267]: Received request to flush runtime journal from PID 1
[ 10.774257] systemd-journald[267]: File /var/log/journal/08f86f43a4fe4daf8279ffc4b5c6ad62/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 26.547157] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 26.562514] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.591873] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 26.591883] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.591886] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 26.591893] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.591894] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 26.591900] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.591901] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 26.591907] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.591908] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 26.604648] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 26.618245] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 26.733217] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 26.733219] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 26.733220] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 26.733221] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 26.848686] intel_rapl: Found RAPL domain package
[ 26.848688] intel_rapl: Found RAPL domain core
[ 26.848690] intel_rapl: Found RAPL domain uncore
[ 26.848696] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 26.915663] audit: type=1400 audit(1556737155.235:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=434 comm="apparmor_parser"
[ 26.915667] audit: type=1400 audit(1556737155.235:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=434 comm="apparmor_parser"
[ 26.915670] audit: type=1400 audit(1556737155.235:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=434 comm="apparmor_parser"
[ 26.915672] audit: type=1400 audit(1556737155.235:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=434 comm="apparmor_parser"
[ 27.323701] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 27.342686] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[ 27.384100] Setting dangerous option enable_psr - tainting kernel
[ 27.384856] [drm] Memory usable by graphics device = 2048M
[ 27.384858] [drm] Replacing VGA console driver
[ 27.385347] Console: switching to colour dummy device 80x25
[ 27.391330] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 27.391331] [drm] Driver supports precise vblank timestamp query.
[ 27.394191] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 27.437670] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 27.438936] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 27.445271] acpi device:39: registered as cooling_device5
[ 27.445662] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 27.509153] fbcon: inteldrmfb (fb0) is primary device
[ 27.587263] wl: loading out-of-tree module taints kernel.
[ 27.587267] wl: module license 'MIXED/Proprietary' taints kernel.
[ 27.587268] Disabling lock debugging due to kernel taint
[ 27.589960] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 27.712844] audit: type=1400 audit(1556737156.035:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=437 comm="apparmor_parser"
[ 27.712848] audit: type=1400 audit(1556737156.035:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=437 comm="apparmor_parser"
[ 27.712850] audit: type=1400 audit(1556737156.035:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=437 comm="apparmor_parser"
[ 27.719514] audit: type=1400 audit(1556737156.039:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=438 comm="apparmor_parser"
[ 27.725055] audit: type=1400 audit(1556737156.047:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=476 comm="apparmor_parser"
[ 27.727234] audit: type=1400 audit(1556737156.047:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=478 comm="apparmor_parser"
[ 27.738541] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 27.796942] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 28.409634] wl 0000:02:00.0 wlp2s0: renamed from wlan0
[ 28.423029] Console: switching to colour frame buffer device 170x48
[ 28.442404] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 28.466870] dell_laptop: Using i8042 filter function for receiving events
[ 28.525227] cdc_wdm 2-1.6:1.5: cdc-wdm0: USB WDM device
[ 28.525300] cdc_wdm 2-1.6:1.8: cdc-wdm1: USB WDM device
[ 28.525334] usbcore: registered new interface driver cdc_wdm
[ 28.578829] cdc_ncm 2-1.6:1.6: MAC-Address: 02:80:37:ec:02:00
[ 28.579947] cdc_ncm 2-1.6:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.6, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 28.580039] usbcore: registered new interface driver cdc_ncm
[ 28.582728] cdc_acm 2-1.6:1.1: ttyACM0: USB ACM device
[ 28.587751] cdc_acm 2-1.6:1.3: ttyACM1: USB ACM device
[ 28.590557] cdc_acm 2-1.6:1.9: ttyACM2: USB ACM device
[ 28.592283] usbcore: registered new interface driver cdc_acm
[ 28.592284] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 28.594376] usbcore: registered new interface driver cdc_mbim
[ 28.605914] cdc_ncm 2-1.6:1.6 wwp0s29u1u6i6: renamed from wwan0
[ 28.802536] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 28.834136] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD90BXX: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[ 28.834141] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 28.834145] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 28.834147] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 28.834149] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 28.834152] snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xf
[ 28.834154] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 28.834157] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 28.897006] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 28.897106] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 28.897200] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 28.897279] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 28.897346] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 28.897408] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 28.897468] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 31.957137] Adding 4071420k swap on /dev/sda6. Priority:-2 extents:1 across:4071420k FS
[ 37.786945] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 38.020664] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 38.028634] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 38.269756] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 61.952442] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 67.519918] rfkill: input handler disabled
Hors ligne
#15 Le 01/05/2019, à 20:37
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
[ 0.000000] ************************************************************
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ** **
[ 0.000000] ** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
[ 0.000000] ** Your performance will increase dramatically if you **
[ 0.000000] ** switch to a 64-bit kernel! **
[ 0.000000] ** **
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ************************************************************
J’ignore pour l’instant ce que signifient PTI et PCID (je vais chercher) mais il est clair qu’on a là un sérieux avertissement.
Donne les retours de :
uname -srmpi
dpkg -l | awk '/^rc/{next} ; / linux-(g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3"}' | column -t
sudo lshw -sanitize
Dernière modification par nany (Le 01/05/2019, à 20:40)
Hors ligne
#16 Le 01/05/2019, à 21:01
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Ok:
uname -srmpi
Linux 4.15.0-48-generic i686 i686 i686
dpkg -l | awk '/^rc/{next} ; / linux-(g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3"}' | column -t
ii linux-generic 4.15.0.48.50 i386
ii linux-headers-generic 4.15.0.48.50 i386
ii linux-image-generic 4.15.0.48.50 i386
ii linux-headers-4.15.0-48 4.15.0-48.51 all
ii linux-headers-4.15.0-48-generic 4.15.0-48.51 i386
ii linux-image-4.15.0-48-generic 4.15.0-48.51 i386
ii linux-modules-4.15.0-48-generic 4.15.0-48.51 i386
ii linux-modules-extra-4.15.0-48-generic 4.15.0-48.51 i386
ii linux-generic-hwe-16.04 4.15.0.48.69 i386
ii linux-headers-generic-hwe-16.04 4.15.0.48.69 i386
ii linux-image-generic-hwe-16.04 4.15.0.48.69 i386
et
[sudo] Mot de passe de tomevlann :
computer
description: Ordinateur portable
produit: Latitude E6320
fabriquant: Dell Inc.
version: 01
numéro de série: [REMOVED]
bits: 32 bits
fonctionnalités: smbios-2.6 dmi-2.6 smp-1.4 smp
configuration: boot=normal chassis=laptop cpus=2 uuid=[REMOVED]
*-core
description: Carte mère
produit: 055XK7
fabriquant: Dell Inc.
identifiant matériel: 0
version: A00
numéro de série: [REMOVED]
*-firmware
description: BIOS
fabriquant: Dell Inc.
identifiant matériel: 0
version: A08
date: 10/18/2011
taille: 64KiB
capacité: 1984KiB
fonctionnalités: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi biosbootspecification
*-cpu:0
description: CPU
produit: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: 6.10.7
numéro de série: [REMOVED]
emplacement: CPU 1
taille: 1010MHz
capacité: 4GHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm arat pln pts flush_l1d cpufreq
configuration: cores=2 enabledcores=2 id=1 threads=4
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1-Cache
taille: 32KiB
capacité: 32KiB
fonctionnalités: internal write-back unified
configuration: level=1
*-cache:1
description: L2 cache
identifiant matériel: 6
emplacement: L2-Cache
taille: 256KiB
capacité: 256KiB
fonctionnalités: internal varies unified
configuration: level=2
*-cache:2
description: L3 cache
identifiant matériel: 7
emplacement: L3-Cache
taille: 3MiB
capacité: 3MiB
fonctionnalités: internal varies unified
configuration: level=3
*-logicalcpu:0
description: CPU Logique
identifiant matériel: 1.1
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:1
description: CPU Logique
identifiant matériel: 1.2
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:2
description: CPU Logique
identifiant matériel: 1.3
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:3
description: CPU Logique
identifiant matériel: 1.4
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:4
description: CPU Logique
identifiant matériel: 1.5
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:5
description: CPU Logique
identifiant matériel: 1.6
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:6
description: CPU Logique
identifiant matériel: 1.7
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:7
description: CPU Logique
identifiant matériel: 1.8
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:8
description: CPU Logique
identifiant matériel: 1.9
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:9
description: CPU Logique
identifiant matériel: 1.a
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:10
description: CPU Logique
identifiant matériel: 1.b
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:11
description: CPU Logique
identifiant matériel: 1.c
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:12
description: CPU Logique
identifiant matériel: 1.d
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:13
description: CPU Logique
identifiant matériel: 1.e
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:14
description: CPU Logique
identifiant matériel: 1.f
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:15
description: CPU Logique
identifiant matériel: 1.10
bits: 64 bits
fonctionnalités: logical
*-memory
description: Mémoire Système
identifiant matériel: 41
emplacement: Carte mère
taille: 4GiB
*-bank:0
description: SODIMM DDR3 Synchrone 1333 MHz (0,8 ns)
produit: HMT351S6CFR8C-H9
fabriquant: Hynix/Hyundai
identifiant matériel: 0
numéro de série: [REMOVED]
emplacement: ChannelA-DIMM0
taille: 4GiB
bits: 64 bits
horloge: 1333MHz (0.8ns)
*-bank:1
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
produit: [Empty]
fabriquant: [Empty]
identifiant matériel: 1
numéro de série: [REMOVED]
emplacement: ChannelB-DIMM0
*-cpu:1
identifiant matériel: 1
information bus: cpu@1
version: 6.10.7
numéro de série: [REMOVED]
taille: 907MHz
capacité: 2200MHz
fonctionnalités: vmx ht cpufreq
configuration: id=1
*-logicalcpu:0
description: CPU Logique
identifiant matériel: 1.1
fonctionnalités: logical
*-logicalcpu:1
description: CPU Logique
identifiant matériel: 1.2
fonctionnalités: logical
*-logicalcpu:2
description: CPU Logique
identifiant matériel: 1.3
fonctionnalités: logical
*-logicalcpu:3
description: CPU Logique
identifiant matériel: 1.4
fonctionnalités: logical
*-logicalcpu:4
description: CPU Logique
identifiant matériel: 1.5
fonctionnalités: logical
*-logicalcpu:5
description: CPU Logique
identifiant matériel: 1.6
fonctionnalités: logical
*-logicalcpu:6
description: CPU Logique
identifiant matériel: 1.7
fonctionnalités: logical
*-logicalcpu:7
description: CPU Logique
identifiant matériel: 1.8
fonctionnalités: logical
*-logicalcpu:8
description: CPU Logique
identifiant matériel: 1.9
fonctionnalités: logical
*-logicalcpu:9
description: CPU Logique
identifiant matériel: 1.a
fonctionnalités: logical
*-logicalcpu:10
description: CPU Logique
identifiant matériel: 1.b
fonctionnalités: logical
*-logicalcpu:11
description: CPU Logique
identifiant matériel: 1.c
fonctionnalités: logical
*-logicalcpu:12
description: CPU Logique
identifiant matériel: 1.d
fonctionnalités: logical
*-logicalcpu:13
description: CPU Logique
identifiant matériel: 1.e
fonctionnalités: logical
*-logicalcpu:14
description: CPU Logique
identifiant matériel: 1.f
fonctionnalités: logical
*-logicalcpu:15
description: CPU Logique
identifiant matériel: 1.10
fonctionnalités: logical
*-pci
description: Host bridge
produit: 2nd Generation Core Processor Family DRAM Controller
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 09
bits: 32 bits
horloge: 33MHz
*-display
description: VGA compatible controller
produit: 2nd Generation Core Processor Family Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 09
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:27 mémoire:e1400000-e17fffff mémoire:d0000000-dfffffff portE/S:4000(taille=64) mémoire:c0000-dffff
*-communication
description: Communication controller
produit: 6 Series/C200 Series Chipset Family MEI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 04
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
ressources: irq:26 mémoire:e2eb0000-e2eb000f
*-network
description: Ethernet interface
produit: 82579LM Gigabit Network Connection (Lewisville)
fabriquant: Intel Corporation
identifiant matériel: 19
information bus: pci@0000:00:19.0
nom logique: eno1
version: 04
numéro de série: [REMOVED]
capacité: 1Gbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=0.13-3 latency=0 link=no multicast=yes port=twisted pair
ressources: irq:25 mémoire:e2e00000-e2e1ffff mémoire:e2e80000-e2e80fff portE/S:4080(taille=32)
*-usb:0
description: USB controller
produit: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 04
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:16 mémoire:e2e70000-e2e703ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.15.0-48-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: Integrated Rate Matching Hub
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@1:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-multimedia
description: Audio device
produit: 6 Series/C200 Series Chipset Family High Definition Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 04
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:28 mémoire:e2e60000-e2e63fff
*-pci:0
description: PCI bridge
produit: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: b4
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16
*-pci:1
description: PCI bridge
produit: 6 Series/C200 Series Chipset Family PCI Express Root Port 2
fabriquant: Intel Corporation
identifiant matériel: 1c.1
information bus: pci@0000:00:1c.1
version: b4
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:17 mémoire:e2d00000-e2dfffff
*-network
description: Interface réseau sans fil
produit: BCM4313 802.11bgn Wireless Network Adapter
fabriquant: Broadcom Inc. and subsidiaries
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlp2s0
version: 01
numéro de série: [REMOVED]
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=wl0 driverversion=6.30.223.271 (r587334) ip=[REMOVED] latency=0 multicast=yes wireless=IEEE 802.11
ressources: irq:17 mémoire:e2d00000-e2d03fff
*-pci:2
description: PCI bridge
produit: 6 Series/C200 Series Chipset Family PCI Express Root Port 3
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: b4
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:18 portE/S:3000(taille=4096) mémoire:e2200000-e2bfffff portE/S:e0a00000(taille=10485760)
*-pci:3
description: PCI bridge
produit: 6 Series/C200 Series Chipset Family PCI Express Root Port 4
fabriquant: Intel Corporation
identifiant matériel: 1c.3
information bus: pci@0000:00:1c.3
version: b4
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:19 portE/S:2000(taille=4096) mémoire:e1800000-e21fffff portE/S:e0000000(taille=10485760)
*-pci:4
description: PCI bridge
produit: 6 Series/C200 Series Chipset Family PCI Express Root Port 6
fabriquant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: b4
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:17 mémoire:e2c00000-e2cfffff
*-generic
description: SD Host controller
produit: OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller
fabriquant: O2 Micro, Inc.
identifiant matériel: 0
information bus: pci@0000:0a:00.0
version: 05
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=sdhci-pci latency=0
ressources: irq:17 mémoire:e2c20000-e2c201ff
*-usb:1
description: USB controller
produit: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 04
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:17 mémoire:e2e50000-e2e503ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.15.0-48-generic ehci_hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: Integrated Rate Matching Hub
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@2:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-usb:0
description: Souris
produit: Microsoft
fabriquant: Microsoft
identifiant matériel: 2
information bus: usb@2:1.2
version: 0.83
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
*-usb:1
description: Périphérique de communication
produit: DW5550
fabriquant: Dell
identifiant matériel: 6
information bus: usb@2:1.6
version: 0.00
numéro de série: [REMOVED]
fonctionnalités: usb-2.00
configuration: driver=cdc_acm speed=480Mbit/s
*-usb:2 NON-RÉCLAMÉ
description: Périphérique USB générique
produit: 5880
fabriquant: Broadcom Corp
identifiant matériel: 8
information bus: usb@2:1.8
version: 1.01
numéro de série: [REMOVED]
fonctionnalités: usb-1.10
configuration: maxpower=100mA speed=12Mbit/s
*-isa
description: ISA bridge
produit: QM67 Express Chipset LPC Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 04
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-storage
description: RAID bus controller
produit: 82801 Mobile SATA Controller [RAID mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 04
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:24 portE/S:40d0(taille=8) portE/S:40c0(taille=4) portE/S:40b0(taille=8) portE/S:40a0(taille=4) portE/S:4060(taille=32) mémoire:e2e40000-e2e407ff
*-serial NON-RÉCLAMÉ
description: SMBus
produit: 6 Series/C200 Series Chipset Family SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 04
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:e2e30000-e2e300ff portE/S:4040(taille=32)
*-scsi:0
identifiant matériel: 2
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: ST9500423AS
fabriquant: Seagate
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: DEM1
numéro de série: [REMOVED]
taille: 465GiB (500GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=a7f9ee5f
*-volume:0
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
version: 3.1
numéro de série: [REMOVED]
taille: 101MiB
capacité: 101MiB
fonctionnalités: primary bootable ntfs initialized
configuration: clustersize=4096 created=2017-02-21 01:40:58 filesystem=ntfs state=clean
*-volume:1
description: Windows NTFS volume
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
version: 3.1
numéro de série: [REMOVED]
taille: 27GiB
capacité: 27GiB
fonctionnalités: primary ntfs initialized
configuration: clustersize=4096 created=2017-02-21 01:42:31 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
*-volume:2
description: Extended partition
identifiant matériel: 3
information bus: scsi@0:0.0.0,3
nom logique: /dev/sda3
taille: 437GiB
capacité: 437GiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 5
nom logique: /dev/sda5
nom logique: /
version: 1.0
numéro de série: [REMOVED]
taille: 371GiB
capacité: 371GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2017-04-05 14:58:07 filesystem=ext4 lastmountpoint=/ modified=2019-05-01 20:58:52 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,stripe=32748,data=ordered mounted=2019-05-01 20:58:57 state=mounted
*-logicalvolume:1
description: Linux swap volume
identifiant matériel: 6
nom logique: /dev/sda6
version: 1
numéro de série: [REMOVED]
taille: 3976MiB
capacité: 3976MiB
fonctionnalités: nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-scsi:1
identifiant matériel: 3
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: DVD+-RW TS-U633J
fabriquant: TSSTcorp
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: D800
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-battery
produit: DELL FN3PT21
fabriquant: SMP
identifiant matériel: 1
version: 01/06/2014
numéro de série: [REMOVED]
emplacement: Sys. Battery Bay
capacité: 57720mWh
configuration: voltage=11,1V
*-network DÉSACTIVÉ
description: Ethernet interface
identifiant matériel: 2
nom logique: wwp0s29u1u6i6
numéro de série: [REMOVED]
fonctionnalités: ethernet physical
configuration: broadcast=yes driver=cdc_ncm driverversion=22-Aug-2005 firmware=Mobile Broadband Network Device link=no multicast=yes
Hors ligne
#17 Le 02/05/2019, à 12:20
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
J’ignore pour l’instant ce que signifient PTI et PCID (je vais chercher)
Bon, j’ai trouvé, c’est Page Tables Isolation et Process Context IDentifiers. Les explications sont très techniques donc difficiles à comprendre (surtout en anglais).
Quoiqu’il en soit, il y aurait bénéfice à passer en 64 bits.
Avant tout, pour clarifier la situation actuelle, donne le retour de :
lsb_release -sd ; printenv XDG_CURRENT_DESKTOP GDMSESSION
Hors ligne
#18 Le 02/05/2019, à 13:07
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Ok dac j'ai regardé oui c'est mieux quand t'as un pc en 64 bits je pense ^^
Voici:
lsb_release -sd ; printenv XDG_CURRENT_DESKTOP GDMSESSION
Ubuntu 18.04.2 LTS
ubuntu:GNOME
ubuntu
Hors ligne
#19 Le 02/05/2019, à 17:08
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Ok. Alors peux-tu faire une live_usb à partir de cette image iso ?
Une fois la clé faite, démarre dessus en choisissant Essayer sans installer (ou, peut-être en anglais : Try without install) et dis-nous comment se fait le démarrage.
Puis, dans cette session live, donne le retour de :
dmesg
Hors ligne
#20 Le 03/05/2019, à 09:30
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Alors le demarrage nickel avec le live USB!
et pour le retour de dmesg:
dmesg
[ 0.000000] Linux version 4.15.0-29-generic (buildd@lgw01-amd64-057) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #31-Ubuntu SMP Tue Jul 17 15:39:52 UTC 2018 (Ubuntu 4.15.0-29.31-generic 4.15.18)
[ 0.000000] Command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- BOOT_IMAGE=/casper/vmlinuz
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000caa28fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caa29000-0x00000000caa6cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caa6d000-0x00000000cadb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Latitude E6320/055XK7, BIOS A08 10/18/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0C8000000 mask FFC000000 write-back
[ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 120000000 mask FF0000000 write-back
[ 0.000000] 7 base 12E000000 mask FFE000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 3984M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f1af0-0x000f1aff] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 8b000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x12cd3f000, 0x12cd3ffff] PGTABLE
[ 0.000000] BRK [0x12cd40000, 0x12cd40fff] PGTABLE
[ 0.000000] BRK [0x12cd41000, 0x12cd41fff] PGTABLE
[ 0.000000] BRK [0x12cd42000, 0x12cd42fff] PGTABLE
[ 0.000000] BRK [0x12cd43000, 0x12cd43fff] PGTABLE
[ 0.000000] BRK [0x12cd44000, 0x12cd44fff] PGTABLE
[ 0.000000] BRK [0x12cd45000, 0x12cd45fff] PGTABLE
[ 0.000000] BRK [0x12cd46000, 0x12cd46fff] PGTABLE
[ 0.000000] BRK [0x12cd47000, 0x12cd47fff] PGTABLE
[ 0.000000] BRK [0x12cd48000, 0x12cd48fff] PGTABLE
[ 0.000000] BRK [0x12cd49000, 0x12cd49fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1dcd3000-0x1fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000CAFFDE18 000074 (v01 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 0x00000000CAF87D98 0000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CAF66018 008461 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[ 0.000000] ACPI: FACS 0x00000000CAFE4E40 000040
[ 0.000000] ACPI: FACS 0x00000000CAFE4D40 000040
[ 0.000000] ACPI: APIC 0x00000000CAFFCF18 0000CC (v02 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x00000000CAFE5D18 000032 (v02 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CAF88A98 0002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
[ 0.000000] ACPI: MCFG 0x00000000CAFE5C98 00003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CAFE5C18 000038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
[ 0.000000] ACPI: BOOT 0x00000000CAFE5B98 000028 (v01 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CAF7D018 00094E (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
[ 0.000000] ACPI: SSDT 0x00000000CAF7C018 000996 (v01 PmRef CpuPm 00003000 INTL 20090903)
[ 0.000000] ACPI: SLIC 0x00000000CAF86C18 000176 (v03 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012dffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12dfd5000-0x12dffffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012dffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000caa28fff]
[ 0.000000] node 0: [mem 0x00000000caa6d000-0x00000000cadb6fff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012dffffff]
[ 0.000000] On node 0 totalpages: 1018116
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 144 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12902 pages used for memmap
[ 0.000000] DMA32 zone: 825716 pages, LIFO batch:31
[ 0.000000] Normal zone: 2944 pages used for memmap
[ 0.000000] Normal zone: 188416 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 117 pages
[ 0.000000] Reserving Intel graphics memory at 0x00000000cba00000-0x00000000cf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaa29000-0xcaa6cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcadb7000-0xcade6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcade7000-0xcafe6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcafe7000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcba00000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffc1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc20000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1002062
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- BOOT_IMAGE=/casper/vmlinuz
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3873256K/4072464K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 199208K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39092 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] Switched APIC routing to physical flat.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2195.161 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.32 BogoMIPS (lpj=8780644)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.028554] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.029045] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.029074] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029092] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029374] CPU: Physical Processor ID: 0
[ 0.029375] CPU: Processor Core ID: 0
[ 0.029381] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.029382] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.029386] mce: CPU supports 7 MCE banks
[ 0.029395] CPU0: Thermal monitoring enabled (TM1)
[ 0.029404] process: using mwait in idle threads
[ 0.029407] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.029408] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.029410] Spectre V2 : Mitigation: Full generic retpoline
[ 0.029411] Speculative Store Bypass: Vulnerable
[ 0.029544] Freeing SMP alternatives memory: 36K
[ 0.031788] TSC deadline timer enabled
[ 0.031792] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.031871] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.031894] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.031896] ... version: 3
[ 0.031897] ... bit width: 48
[ 0.031897] ... generic registers: 4
[ 0.031898] ... value mask: 0000ffffffffffff
[ 0.031899] ... max period: 00007fffffffffff
[ 0.031900] ... fixed-purpose events: 3
[ 0.031900] ... event mask: 000000070000000f
[ 0.031944] Hierarchical SRCU implementation.
[ 0.032000] smp: Bringing up secondary CPUs ...
[ 0.032000] x86: Booting SMP configuration:
[ 0.032000] .... node #0, CPUs: #1
[ 0.032476] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.032498] #2 #3
[ 0.036062] smp: Brought up 1 node, 4 CPUs
[ 0.036062] smpboot: Max logical packages: 4
[ 0.036062] smpboot: Total of 4 processors activated (17561.28 BogoMIPS)
[ 0.039199] devtmpfs: initialized
[ 0.039199] x86/mm: Memory block size: 128MB
[ 0.040193] evm: security.selinux
[ 0.040194] evm: security.SMACK64
[ 0.040194] evm: security.SMACK64EXEC
[ 0.040195] evm: security.SMACK64TRANSMUTE
[ 0.040195] evm: security.SMACK64MMAP
[ 0.040196] evm: security.apparmor
[ 0.040197] evm: security.ima
[ 0.040197] evm: security.capability
[ 0.040217] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
[ 0.040217] reboot: Dell Latitude E6320 series board detected. Selecting PCI-method for reboots.
[ 0.040217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040217] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.040217] pinctrl core: initialized pinctrl subsystem
[ 0.040222] RTC time: 8:10:04, date: 05/03/19
[ 0.040343] NET: Registered protocol family 16
[ 0.040440] audit: initializing netlink subsys (disabled)
[ 0.040448] audit: type=2000 audit(1556871004.040:1): state=initialized audit_enabled=0 res=1
[ 0.040448] cpuidle: using governor ladder
[ 0.040448] cpuidle: using governor menu
[ 0.040448] Simple Boot Flag at 0xf3 set to 0x1
[ 0.040448] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040448] ACPI: bus type PCI registered
[ 0.040448] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040448] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040448] PCI: not using MMCONFIG
[ 0.040448] PCI: Using configuration type 1 for base access
[ 0.040448] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.041386] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.041386] ACPI: Added _OSI(Module Device)
[ 0.041386] ACPI: Added _OSI(Processor Device)
[ 0.041386] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.041386] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.041386] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.048002] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.060657] ACPI: Dynamic OEM Table Load:
[ 0.060666] ACPI: SSDT 0xFFFF8BFD2635B800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 0.060848] ACPI: Dynamic OEM Table Load:
[ 0.060848] ACPI: SSDT 0xFFFF8BFD25DD5400 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 0.060848] ACPI: Dynamic OEM Table Load:
[ 0.060848] ACPI: SSDT 0xFFFF8BFD25D55C00 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 0.061055] ACPI: EC: EC started
[ 0.061056] ACPI: EC: interrupt blocked
[ 0.064463] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.064465] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.064467] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.064468] ACPI: Interpreter enabled
[ 0.064494] ACPI: (supports S0 S3 S4 S5)
[ 0.064495] ACPI: Using IOAPIC for interrupt routing
[ 0.064532] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.065169] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.065180] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.065428] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.085445] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.085452] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.085516] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.086359] PCI host bridge to bus 0000:00
[ 0.086362] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.086364] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.086366] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.086367] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[ 0.086369] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.086371] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.086380] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.086498] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.086510] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.086517] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.086521] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.086655] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.086683] pci 0000:00:16.0: reg 0x10: [mem 0xe2eb0000-0xe2eb000f 64bit]
[ 0.086763] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.086867] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.086888] pci 0000:00:19.0: reg 0x10: [mem 0xe2e00000-0xe2e1ffff]
[ 0.086897] pci 0000:00:19.0: reg 0x14: [mem 0xe2e80000-0xe2e80fff]
[ 0.086907] pci 0000:00:19.0: reg 0x18: [io 0x4080-0x409f]
[ 0.086972] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.087073] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.087097] pci 0000:00:1a.0: reg 0x10: [mem 0xe2e70000-0xe2e703ff]
[ 0.087186] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.087289] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.087311] pci 0000:00:1b.0: reg 0x10: [mem 0xe2e60000-0xe2e63fff 64bit]
[ 0.087393] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.087506] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.087650] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.087768] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.087909] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.088031] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.088173] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.088290] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.088432] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.088552] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.088695] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.088813] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.088837] pci 0000:00:1d.0: reg 0x10: [mem 0xe2e50000-0xe2e503ff]
[ 0.088927] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.089035] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.089241] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.089262] pci 0000:00:1f.2: reg 0x10: [io 0x40d0-0x40d7]
[ 0.089270] pci 0000:00:1f.2: reg 0x14: [io 0x40c0-0x40c3]
[ 0.089279] pci 0000:00:1f.2: reg 0x18: [io 0x40b0-0x40b7]
[ 0.089287] pci 0000:00:1f.2: reg 0x1c: [io 0x40a0-0x40a3]
[ 0.089296] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.089304] pci 0000:00:1f.2: reg 0x24: [mem 0xe2e40000-0xe2e407ff]
[ 0.089349] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.089447] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.089468] pci 0000:00:1f.3: reg 0x10: [mem 0xe2e30000-0xe2e300ff 64bit]
[ 0.089490] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.089678] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.089824] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[ 0.089871] pci 0000:02:00.0: reg 0x10: [mem 0xe2d00000-0xe2d03fff 64bit]
[ 0.089950] pci 0000:02:00.0: enabling Extended Tags
[ 0.090056] pci 0000:02:00.0: supports D1 D2
[ 0.090057] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.100093] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.100099] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
[ 0.100203] acpiphp: Slot [1] registered
[ 0.100211] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 0.100215] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.100219] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
[ 0.100226] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 0.100288] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.100292] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.100297] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
[ 0.100303] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.102129] pci 0000:0a:00.0: [1217:8221] type 00 class 0x080501
[ 0.102202] pci 0000:0a:00.0: reg 0x10: [mem 0xe2c20000-0xe2c201ff]
[ 0.102552] pci 0000:0a:00.0: supports D1 D2
[ 0.102554] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113764] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 0.113771] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
[ 0.115893] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.115983] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.116077] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.116166] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.116253] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.116340] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.116428] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.116514] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.119407] ACPI: EC: interrupt unblocked
[ 0.119414] ACPI: EC: event unblocked
[ 0.119422] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.119424] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.119685] SCSI subsystem initialized
[ 0.119702] libata version 3.00 loaded.
[ 0.119702] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.119702] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.119702] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.119702] vgaarb: loaded
[ 0.119702] ACPI: bus type USB registered
[ 0.119702] usbcore: registered new interface driver usbfs
[ 0.119702] usbcore: registered new interface driver hub
[ 0.119702] usbcore: registered new device driver usb
[ 0.119702] EDAC MC: Ver: 3.0.0
[ 0.121742] PCI: Using ACPI for IRQ routing
[ 0.121742] PCI: pci_cache_line_size set to 64 bytes
[ 0.124069] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 0.124070] e820: reserve RAM buffer [mem 0xcaa29000-0xcbffffff]
[ 0.124072] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[ 0.124073] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.124075] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[ 0.124184] NetLabel: Initializing
[ 0.124185] NetLabel: domain hash size = 128
[ 0.124186] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.124203] NetLabel: unlabeled traffic allowed by default
[ 0.124218] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.124218] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.126091] clocksource: Switched to clocksource hpet
[ 0.136817] VFS: Disk quotas dquot_6.6.0
[ 0.136843] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.136958] AppArmor: AppArmor Filesystem Enabled
[ 0.136990] pnp: PnP ACPI init
[ 0.137227] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.137234] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.137293] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.137296] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.137298] system 00:01: [io 0xffff] has been reserved
[ 0.137300] system 00:01: [io 0xffff] has been reserved
[ 0.137301] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.137303] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.137305] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.137310] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.137341] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.137369] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.138486] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.138513] pnp 00:05: Plug and Play ACPI device, IDs DLL0492 PNP0f13 (active)
[ 0.138784] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.138786] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.138788] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.138790] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.138792] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.138794] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.138796] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.138798] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.138800] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.138802] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.138808] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.142204] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[ 0.142207] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[ 0.142212] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.142224] pnp: PnP ACPI: found 8 devices
[ 0.148878] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.148943] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.148961] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.148968] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
[ 0.148980] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 0.148984] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.148990] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
[ 0.148995] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 0.149003] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.149006] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.149013] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
[ 0.149018] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.149026] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 0.149034] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
[ 0.149046] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.149048] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.149050] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.149051] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[ 0.149053] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.149055] pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
[ 0.149057] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.149058] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
[ 0.149060] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 0.149062] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.149063] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
[ 0.149065] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[ 0.149066] pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
[ 0.149183] NET: Registered protocol family 2
[ 0.149416] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.149490] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.149579] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.149628] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.149644] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.149710] NET: Registered protocol family 1
[ 0.149724] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.152025] PCI: CLS 64 bytes, default 64
[ 0.152074] Unpacking initramfs...
[ 8.282028] Freeing initrd memory: 36016K
[ 8.282057] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 8.282060] software IO TLB [mem 0xc6a29000-0xcaa29000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 8.282314] Scanning for low memory corruption every 60 seconds
[ 8.283159] Initialise system trusted keyrings
[ 8.283170] Key type blacklist registered
[ 8.283212] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 8.284484] zbud: loaded
[ 8.285024] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.285179] fuse init (API version 7.26)
[ 8.286642] Key type asymmetric registered
[ 8.286643] Asymmetric key parser 'x509' registered
[ 8.286676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 8.286715] io scheduler noop registered
[ 8.286716] io scheduler deadline registered
[ 8.286761] io scheduler cfq registered (default)
[ 8.287883] intel_idle: MWAIT substates: 0x21120
[ 8.287885] intel_idle: v0.4.1 model 0x2A
[ 8.288058] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 8.288614] ACPI: AC Adapter [AC] (on-line)
[ 8.288681] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 8.288714] ACPI: Lid Switch [LID]
[ 8.288755] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 8.288779] ACPI: Power Button [PBTN]
[ 8.288814] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 8.288823] ACPI: Sleep Button [SBTN]
[ 8.288856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.288877] ACPI: Power Button [PWRF]
[ 8.289899] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 8.290227] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.290228] ACPI: Thermal Zone [THM] (25 C)
[ 8.290427] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 8.293936] Linux agpgart interface v0.103
[ 8.296424] loop: module loaded
[ 8.296610] libphy: Fixed MDIO Bus: probed
[ 8.296611] tun: Universal TUN/TAP device driver, 1.6
[ 8.296651] PPP generic driver version 2.4.2
[ 8.296698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.296701] ehci-pci: EHCI PCI platform driver
[ 8.296971] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 8.296982] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 8.296996] ehci-pci 0000:00:1a.0: debug port 2
[ 8.300905] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 8.300921] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe2e70000
[ 8.306708] ACPI: Battery Slot [BAT0] (battery present)
[ 8.307814] ACPI: Battery Slot [BAT1] (battery absent)
[ 8.308926] ACPI: Battery Slot [BAT2] (battery absent)
[ 8.316078] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 8.316146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.316148] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.316150] usb usb1: Product: EHCI Host Controller
[ 8.316152] usb usb1: Manufacturer: Linux 4.15.0-29-generic ehci_hcd
[ 8.316153] usb usb1: SerialNumber: 0000:00:1a.0
[ 8.316290] hub 1-0:1.0: USB hub found
[ 8.316297] hub 1-0:1.0: 2 ports detected
[ 8.316536] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 8.316542] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.316555] ehci-pci 0000:00:1d.0: debug port 2
[ 8.320468] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 8.320480] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe2e50000
[ 8.336122] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 8.336187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.336189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.336191] usb usb2: Product: EHCI Host Controller
[ 8.336193] usb usb2: Manufacturer: Linux 4.15.0-29-generic ehci_hcd
[ 8.336194] usb usb2: SerialNumber: 0000:00:1d.0
[ 8.336366] hub 2-0:1.0: USB hub found
[ 8.336373] hub 2-0:1.0: 2 ports detected
[ 8.336494] ehci-platform: EHCI generic platform driver
[ 8.336513] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.336516] ohci-pci: OHCI PCI platform driver
[ 8.336526] ohci-platform: OHCI generic platform driver
[ 8.336534] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.336597] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.336981] i8042: Warning: Keylock active
[ 8.338270] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.338275] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.338424] mousedev: PS/2 mouse device common for all mice
[ 8.338661] rtc_cmos 00:02: RTC can wake from S4
[ 8.338820] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 8.338848] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 8.338855] i2c /dev entries driver
[ 8.338919] device-mapper: uevent: version 1.0.3
[ 8.338992] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 8.338998] intel_pstate: Intel P-state driver initializing
[ 8.339226] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.339648] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 8.339676] NET: Registered protocol family 10
[ 8.343894] Segment Routing with IPv6
[ 8.343915] NET: Registered protocol family 17
[ 8.343959] Key type dns_resolver registered
[ 8.344324] RAS: Correctable Errors collector initialized.
[ 8.344389] microcode: sig=0x206a7, pf=0x10, revision=0x23
[ 8.344525] microcode: Microcode Update Driver: v2.2.
[ 8.344535] sched_clock: Marking stable (8344518824, 0)->(8326228698, 18290126)
[ 8.344768] registered taskstats version 1
[ 8.344777] Loading compiled-in X.509 certificates
[ 8.347636] Loaded X.509 cert 'Build time autogenerated kernel key: 1cc37f41791529df57507d3747a6804ab53f482b'
[ 8.347661] zswap: loaded using pool lzo/zbud
[ 8.351218] Key type big_key registered
[ 8.351222] Key type trusted registered
[ 8.352980] Key type encrypted registered
[ 8.352983] AppArmor: AppArmor sha1 policy hashing enabled
[ 8.352986] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 8.353006] evm: HMAC attrs: 0x1
[ 8.355069] Magic number: 3:680:168
[ 8.355116] acpi device:31: hash matches
[ 8.355181] rtc_cmos 00:02: setting system clock to 2019-05-03 08:10:12 UTC (1556871012)
[ 8.355240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.355241] EDD information not available.
[ 8.359041] Freeing unused kernel memory: 2408K
[ 8.384115] Write protecting the kernel read-only data: 20480k
[ 8.384756] Freeing unused kernel memory: 2008K
[ 8.389743] Freeing unused kernel memory: 1904K
[ 8.398095] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 8.398096] x86/mm: Checking user space page tables
[ 8.406264] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 8.499807] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 8.500355] pps_core: LinuxPPS API ver. 1 registered
[ 8.500357] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 8.502716] PTP clock support registered
[ 8.504512] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 8.504544] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 8.504572] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 8.504625] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 8.505717] sdhci: Secure Digital Host Controller Interface driver
[ 8.505718] sdhci: Copyright(c) Pierre Ossman
[ 8.508703] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
[ 8.510654] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 8.514823] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
[ 8.524315] bcma: bus0: Bus registered
[ 8.545589] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 8.545590] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 8.545885] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 8.652074] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 8.654828] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 8.672095] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 8.752948] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:2e:6e:43
[ 8.752951] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 8.752993] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 2041FF-0FF
[ 8.753050] ahci 0000:00:1f.2: version 3.0
[ 8.753355] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 8.754039] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 8.763550] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
[ 8.763554] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 8.808439] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 8.808444] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.808730] hub 1-1:1.0: USB hub found
[ 8.808807] hub 1-1:1.0: 6 ports detected
[ 8.808914] scsi host0: ahci
[ 8.809385] scsi host1: ahci
[ 8.809536] scsi host2: ahci
[ 8.809682] scsi host3: ahci
[ 8.809845] scsi host4: ahci
[ 8.809972] scsi host5: ahci
[ 8.810037] ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 25
[ 8.810041] ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 25
[ 8.810050] ata3: DUMMY
[ 8.810053] ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 25
[ 8.810055] ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 25
[ 8.810058] ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 25
[ 8.810764] [drm] Memory usable by graphics device = 2048M
[ 8.810767] [drm] Replacing VGA console driver
[ 8.811232] Console: switching to colour dummy device 80x25
[ 8.816684] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.816685] [drm] Driver supports precise vblank timestamp query.
[ 8.819496] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.830266] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 8.830280] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.831150] hub 2-1:1.0: USB hub found
[ 8.831423] hub 2-1:1.0: 8 ports detected
[ 8.864079] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 8.865205] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 8.872591] acpi device:39: registered as cooling_device4
[ 8.873055] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 8.927357] random: fast init done
[ 8.934945] fbcon: inteldrmfb (fb0) is primary device
[ 8.935023] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 8.935048] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 8.935051] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 8.935099] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 8.935109] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 8.935113] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 8.935195] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 9.120061] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[ 9.124138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.145510] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9.239420] usb 2-1.2: New USB device found, idVendor=045e, idProduct=076c
[ 9.239422] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.239424] usb 2-1.2: Product: Microsoft® Comfort Mouse 4500
[ 9.239426] usb 2-1.2: Manufacturer: Microsoft
[ 9.239686] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 9.239697] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 9.239722] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 9.244157] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.259623] usbcore: registered new interface driver usbhid
[ 9.259624] usbhid: USB HID core driver
[ 9.262377] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:076C.0001/input/input8
[ 9.308031] tsc: Refined TSC clocksource calibration: 2195.016 MHz
[ 9.308046] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cea2188, max_idle_ns: 440795264005 ns
[ 9.320056] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[ 9.322086] microsoft 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1d.0-1.2/input0
[ 9.431743] usb 2-1.3: New USB device found, idVendor=058f, idProduct=6366
[ 9.431749] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.431763] usb 2-1.3: Product: Mass Storage Device
[ 9.431765] usb 2-1.3: Manufacturer: Generic
[ 9.431766] usb 2-1.3: SerialNumber: 058F63666433
[ 9.435975] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 9.436107] scsi host6: usb-storage 2-1.3:1.0
[ 9.436213] usbcore: registered new interface driver usb-storage
[ 9.437964] usbcore: registered new interface driver uas
[ 9.455225] ata1.00: ATA-8: ST9500423AS, 0005DEM1, max UDMA/133
[ 9.455231] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 9.457761] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9.458032] ata1.00: configured for UDMA/133
[ 9.458399] scsi 0:0:0:0: Direct-Access ATA ST9500423AS DEM1 PQ: 0 ANSI: 5
[ 9.458768] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.458832] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 9.458834] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 9.458880] sd 0:0:0:0: [sda] Write Protect is off
[ 9.458882] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.458921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.511141] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 9.511869] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.511961] usb 2-1.6: new high-speed USB device number 5 using ehci-pci
[ 9.643327] usb 2-1.6: New USB device found, idVendor=413c, idProduct=818d
[ 9.643333] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.643338] usb 2-1.6: Product: DW5550
[ 9.643350] usb 2-1.6: Manufacturer: Dell
[ 9.643351] usb 2-1.6: SerialNumber: 0DA6B74145569D30
[ 9.760009] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
[ 9.772490] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.783913] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633J, D800, max UDMA/100
[ 9.796519] ata2.00: configured for UDMA/100
[ 9.802162] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633J D800 PQ: 0 ANSI: 5
[ 9.829640] Console: switching to colour frame buffer device 170x48
[ 9.849138] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.870258] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.870261] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.870481] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.870589] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.896976] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
[ 9.896979] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.896982] usb 2-1.8: Product: 5880
[ 9.896984] usb 2-1.8: Manufacturer: Broadcom Corp
[ 9.896988] usb 2-1.8: SerialNumber: 0123456789ABCD
[ 9.897198] usb 2-1.8: config 0 descriptor??
[ 9.960637] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input9
[ 9.973847] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[ 10.183937] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.332195] clocksource: Switched to clocksource tsc
[ 10.499865] ata5: SATA link down (SStatus 0 SControl 300)
[ 10.592579] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 10.593033] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 10.815649] ata6: SATA link down (SStatus 0 SControl 300)
[ 11.303254] sd 6:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
[ 11.304347] sd 6:0:0:0: [sdb] Write Protect is off
[ 11.304350] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 11.305497] sd 6:0:0:0: [sdb] No Caching mode page found
[ 11.305544] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 11.323851] sdb: sdb1
[ 11.327537] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 13.222921] random: crng init done
[ 13.263727] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 17.556151] Adding 4071420k swap on /dev/sda6. Priority:-2 extents:1 across:4071420k FS
[ 24.353084] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.360341] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 24.380258] systemd[1]: Detected architecture x86-64.
[ 24.382680] systemd[1]: Set hostname to <ubuntu>.
[ 24.382905] systemd[1]: Initializing machine ID from random generator.
[ 24.573517] systemd[1]: Unnecessary job for /dev/loop0 was removed.
[ 24.573901] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 24.573942] systemd[1]: Reached target User and Group Name Lookups.
[ 24.574141] systemd[1]: Created slice User and Session Slice.
[ 24.574156] systemd[1]: Reached target Remote File Systems.
[ 24.574367] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 24.763763] systemd-journald[1006]: Received request to flush runtime journal from PID 1
[ 24.882866] lp: driver loaded but no devices found
[ 24.888300] ppdev: user-space parallel port driver
[ 24.907858] parport_pc 00:04: [io 0x0378-0x037b]
[ 24.909730] parport_pc 00:04: [irq 5]
[ 24.915696] parport_pc 00:04: activated
[ 24.915701] parport_pc 00:04: reported by Plug and Play ACPI
[ 25.158848] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.215225] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 25.215235] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.215240] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 25.215247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.215249] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 25.215255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.215257] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 25.215264] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.215265] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 25.984826] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[ 25.986062] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[ 26.005715] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 26.005717] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 26.005719] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 26.005720] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 26.008472] cdc_acm 2-1.6:1.1: ttyACM0: USB ACM device
[ 26.012089] cdc_wdm 2-1.6:1.5: cdc-wdm0: USB WDM device
[ 26.012154] cdc_wdm 2-1.6:1.8: cdc-wdm1: USB WDM device
[ 26.012185] usbcore: registered new interface driver cdc_wdm
[ 26.012234] cdc_acm 2-1.6:1.3: ttyACM1: USB ACM device
[ 26.012780] cdc_acm 2-1.6:1.9: ttyACM2: USB ACM device
[ 26.013178] usbcore: registered new interface driver cdc_acm
[ 26.013179] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 26.351909] cdc_ncm 2-1.6:1.6: MAC-Address: 02:80:37:ec:02:00
[ 26.354191] cdc_ncm 2-1.6:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.6, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 26.354353] usbcore: registered new interface driver cdc_ncm
[ 26.368431] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 26.372863] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 26.437695] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 26.648980] usbcore: registered new interface driver cdc_mbim
[ 26.857531] cdc_ncm 2-1.6:1.6 wwp0s29u1u6i6: renamed from wwan0
[ 26.876501] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 26.892105] dell_laptop: Using i8042 filter function for receiving events
[ 27.045210] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD90BXX: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[ 27.045213] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 27.045216] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 27.045217] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 27.045218] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 27.045220] snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xf
[ 27.045222] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 27.045224] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 27.180562] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 27.180657] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 27.180727] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 27.180800] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 27.180869] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 27.180942] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 27.181008] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 27.777378] intel_rapl: Found RAPL domain package
[ 27.777380] intel_rapl: Found RAPL domain core
[ 27.777381] intel_rapl: Found RAPL domain uncore
[ 27.777388] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 28.034963] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 28.034972] b43: probe of bcma0:1 failed with error -524
[ 28.034994] Broadcom 43xx driver loaded [ Features: PNL ]
[ 28.474164] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
[ 28.515699] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.516167] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
[ 28.518520] brcmsmac bcma0:1 wlp2s0b1: renamed from wlan0
[ 29.856732] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 30.109110] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 30.114174] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 30.228937] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 30.228951] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 30.229207] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 30.354797] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 30.417882] audit: type=1400 audit(1556871034.557:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1441 comm="apparmor_parser"
[ 30.418212] audit: type=1400 audit(1556871034.557:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1441 comm="apparmor_parser"
[ 45.797567] rfkill: input handler disabled
[ 65.189505] audit: type=1400 audit(1556871069.329:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=2286 comm="apparmor_parser"
[ 65.280010] audit: type=1400 audit(1556871069.421:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=2288 comm="apparmor_parser"
[ 67.480442] audit: type=1400 audit(1556871071.621:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=2395 comm="apparmor_parser"
[ 67.480655] audit: type=1400 audit(1556871071.621:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2395 comm="apparmor_parser"
[ 67.488183] audit: type=1400 audit(1556871071.629:8): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2399 comm="apparmor_parser"
[ 67.610487] audit: type=1400 audit(1556871071.749:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=2401 comm="apparmor_parser"
[ 67.657982] audit: type=1400 audit(1556871071.797:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=2409 comm="apparmor_parser"
[ 67.672168] audit: type=1400 audit(1556871071.813:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2409 comm="apparmor_parser"
[ 67.679226] audit: type=1400 audit(1556871071.817:12): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2411 comm="apparmor_parser"
[ 67.690326] audit: type=1400 audit(1556871071.829:13): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=2413 comm="apparmor_parser"
[ 78.829464] wlp2s0b1: authenticate with 44:d4:e0:98:a8:b4
[ 78.833063] wlp2s0b1: send auth to 44:d4:e0:98:a8:b4 (try 1/3)
[ 78.834644] wlp2s0b1: authenticated
[ 78.835986] wlp2s0b1: associate with 44:d4:e0:98:a8:b4 (try 1/3)
[ 78.846957] wlp2s0b1: RX AssocResp from 44:d4:e0:98:a8:b4 (capab=0x8431 status=0 aid=2)
[ 78.847503] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 78.847510] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 78.847521] wlp2s0b1: associated
[ 78.856243] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
[ 79.856564] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
[ 80.857535] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
[ 81.857291] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
[ 82.857844] wlp2s0b1: deauthenticated from 44:d4:e0:98:a8:b4 (Reason: 19=INVALID_PAIRWISE_CIPHER)
[ 82.888208] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 82.888228] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 103.240860] wlp2s0b1: authenticate with 44:d4:e0:98:a8:b4
[ 103.241014] wlp2s0b1: send auth to 44:d4:e0:98:a8:b4 (try 1/3)
[ 103.243760] wlp2s0b1: authenticated
[ 103.248016] wlp2s0b1: associate with 44:d4:e0:98:a8:b4 (try 1/3)
[ 103.258798] wlp2s0b1: RX AssocResp from 44:d4:e0:98:a8:b4 (capab=0x8431 status=0 aid=3)
[ 103.259338] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 103.259344] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 103.259355] wlp2s0b1: associated
[ 103.264061] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 159/256 dur 1778/1504
[ 103.272351] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504
[ 103.306030] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 103.489501] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 130.201416] audit: type=1400 audit(1556871135.064:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=2734 comm="apparmor_parser"
[ 130.310832] audit: type=1400 audit(1556871135.172:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=2736 comm="apparmor_parser"
[ 130.650298] audit: type=1400 audit(1556871135.512:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=2745 comm="apparmor_parser"
[ 130.756922] audit: type=1400 audit(1556871135.620:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=2747 comm="apparmor_parser"
[ 130.970486] audit: type=1400 audit(1556871135.832:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=2755 comm="apparmor_parser"
[ 131.074606] audit: type=1400 audit(1556871135.936:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=2757 comm="apparmor_parser"
[ 131.152766] audit: type=1400 audit(1556871136.016:20): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=2765 comm="apparmor_parser"
[ 131.152775] audit: type=1400 audit(1556871136.016:21): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2765 comm="apparmor_parser"
[ 131.161526] audit: type=1400 audit(1556871136.024:22): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2767 comm="apparmor_parser"
[ 131.167659] audit: type=1400 audit(1556871136.028:23): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=2769 comm="apparmor_parser"
[ 135.259020] kauditd_printk_skb: 34 callbacks suppressed
[ 135.259022] audit: type=1400 audit(1556871140.120:58): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=2907 comm="apparmor_parser"
[ 135.625442] audit: type=1400 audit(1556871140.488:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=2909 comm="apparmor_parser"
[ 136.297392] audit: type=1400 audit(1556871141.160:60): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=2988 comm="apparmor_parser"
[ 136.397818] audit: type=1400 audit(1556871141.260:61): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=2990 comm="apparmor_parser"
[ 136.810258] audit: type=1400 audit(1556871141.672:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=2999 comm="apparmor_parser"
[ 136.945902] audit: type=1400 audit(1556871141.808:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=3002 comm="apparmor_parser"
[ 137.031418] audit: type=1400 audit(1556871141.892:64): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3010 comm="apparmor_parser"
[ 137.031428] audit: type=1400 audit(1556871141.892:65): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3010 comm="apparmor_parser"
[ 137.037220] audit: type=1400 audit(1556871141.900:66): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3012 comm="apparmor_parser"
[ 137.045535] audit: type=1400 audit(1556871141.908:67): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3014 comm="apparmor_parser"
[ 140.410068] kauditd_printk_skb: 29 callbacks suppressed
[ 140.410071] audit: type=1400 audit(1556871145.272:97): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=3132 comm="apparmor_parser"
[ 140.786343] audit: type=1400 audit(1556871145.648:98): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=3140 comm="apparmor_parser"
[ 141.075598] audit: type=1400 audit(1556871145.936:99): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=3142 comm="apparmor_parser"
[ 141.166135] audit: type=1400 audit(1556871146.028:100): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3150 comm="apparmor_parser"
[ 141.166146] audit: type=1400 audit(1556871146.028:101): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3150 comm="apparmor_parser"
[ 141.173255] audit: type=1400 audit(1556871146.036:102): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3152 comm="apparmor_parser"
[ 141.179537] audit: type=1400 audit(1556871146.040:103): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3154 comm="apparmor_parser"
[ 141.484393] audit: type=1400 audit(1556871146.348:104): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=3163 comm="apparmor_parser"
[ 141.803070] audit: type=1400 audit(1556871146.664:105): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=3165 comm="apparmor_parser"
[ 141.896676] audit: type=1400 audit(1556871146.760:106): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3174 comm="apparmor_parser"
[ 145.619511] kauditd_printk_skb: 32 callbacks suppressed
[ 145.619513] audit: type=1400 audit(1556871150.480:139): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=3364 comm="apparmor_parser"
[ 145.722384] audit: type=1400 audit(1556871150.584:140): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3372 comm="apparmor_parser"
[ 145.722391] audit: type=1400 audit(1556871150.584:141): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3372 comm="apparmor_parser"
[ 145.729435] audit: type=1400 audit(1556871150.592:142): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3374 comm="apparmor_parser"
[ 145.737846] audit: type=1400 audit(1556871150.600:143): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3376 comm="apparmor_parser"
[ 145.812738] audit: type=1400 audit(1556871150.676:144): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=3384 comm="apparmor_parser"
[ 146.110836] audit: type=1400 audit(1556871150.972:145): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=3386 comm="apparmor_parser"
[ 146.277462] audit: type=1400 audit(1556871151.140:146): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=3394 comm="apparmor_parser"
[ 146.575825] audit: type=1400 audit(1556871151.436:147): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=3396 comm="apparmor_parser"
[ 146.851778] audit: type=1400 audit(1556871151.712:148): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=3404 comm="apparmor_parser"
[ 150.883757] kauditd_printk_skb: 21 callbacks suppressed
[ 150.883758] audit: type=1400 audit(1556871155.744:170): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=3556 comm="apparmor_parser"
[ 150.995212] audit: type=1400 audit(1556871155.856:171): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=3558 comm="apparmor_parser"
[ 151.274009] audit: type=1400 audit(1556871156.133:172): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3567 comm="apparmor_parser"
[ 151.274016] audit: type=1400 audit(1556871156.133:173): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3567 comm="apparmor_parser"
[ 151.281397] audit: type=1400 audit(1556871156.141:174): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3569 comm="apparmor_parser"
[ 151.287853] audit: type=1400 audit(1556871156.148:175): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3571 comm="apparmor_parser"
[ 151.423171] audit: type=1400 audit(1556871156.278:176): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=3579 comm="apparmor_parser"
[ 151.551815] audit: type=1400 audit(1556871156.403:177): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=3581 comm="apparmor_parser"
[ 151.774883] audit: type=1400 audit(1556871156.622:178): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3589 comm="apparmor_parser"
[ 151.774890] audit: type=1400 audit(1556871156.622:179): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3589 comm="apparmor_parser"
[ 156.210942] kauditd_printk_skb: 39 callbacks suppressed
[ 156.210944] audit: type=1400 audit(1556871160.987:219): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=3742 comm="apparmor_parser"
[ 156.324445] audit: type=1400 audit(1556871161.098:220): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3751 comm="apparmor_parser"
[ 156.324452] audit: type=1400 audit(1556871161.098:221): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3751 comm="apparmor_parser"
[ 156.332734] audit: type=1400 audit(1556871161.106:222): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3753 comm="apparmor_parser"
[ 156.339842] audit: type=1400 audit(1556871161.114:223): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=3755 comm="apparmor_parser"
[ 156.572437] audit: type=1400 audit(1556871161.347:224): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=3763 comm="apparmor_parser"
[ 157.019104] audit: type=1400 audit(1556871161.786:225): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=3765 comm="apparmor_parser"
[ 157.138664] audit: type=1400 audit(1556871161.909:226): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=3773 comm="apparmor_parser"
[ 157.138670] audit: type=1400 audit(1556871161.909:227): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3773 comm="apparmor_parser"
[ 157.146622] audit: type=1400 audit(1556871161.917:228): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=3775 comm="apparmor_parser"
Hors ligne
#21 Le 03/05/2019, à 13:16
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39092 entries in 153 pages
Il n’y a plus d’avertissement qui saute aux yeux.
Alors le demarrage nickel avec le live USB!
C’est parfait.
Alors conserve la clé pour pouvoir procéder à la réinstallation en 64 bits.
Mais avant, démarre sur ta session installée pour donner les retours de :
sudo fdisk -l
sudo parted -l
df -Th
Puis (toujours depuis la session installée) procède à la sauvegarde de tes données.
Hors ligne
#22 Le 04/05/2019, à 09:39
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Yes:
~$ sudo fdisk -l
[sudo] Mot de passe de tomevlann :
Disque /dev/loop0 : 85,6 MiB, 89735168 octets, 175264 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop1 : 35,3 MiB, 37027840 octets, 72320 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/loop2 : 85,7 MiB, 89800704 octets, 175392 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xa7f9ee5f
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sda1 * 63 208844 208782 102M 7 HPFS/NTFS/exFAT
/dev/sda2 208845 58386841 58177997 27,8G 7 HPFS/NTFS/exFAT
/dev/sda3 58388478 976771071 918382594 437,9G 5 Étendue
/dev/sda5 58388480 836628479 778240000 371,1G 83 Linux
/dev/sda6 968628224 976771071 8142848 3,9G 82 partition d'échang
La partition 1 ne commence pas sur une frontière de cylindre physique.
La partition 2 ne commence pas sur une frontière de cylindre physique.
La partition 3 ne commence pas sur une frontière de cylindre physique.
sudo parted -l
Modèle: ATA ST9500423AS (scsi)
Disque /dev/sda : 500GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : msdos
Disk Flags:
Numéro Début Fin Taille Type Système de fichiers Fanions
1 32,3kB 107MB 107MB primary ntfs démarrage
2 107MB 29,9GB 29,8GB primary ntfs
3 29,9GB 500GB 470GB extended
5 29,9GB 428GB 398GB logical ext4
6 496GB 500GB 4169MB logical linux-swap(v1)
df -Th
Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
udev devtmpfs 1,9G 0 1,9G 0% /dev
tmpfs tmpfs 392M 1,9M 390M 1% /run
/dev/sda5 ext4 366G 296G 52G 86% /
tmpfs tmpfs 2,0G 44M 1,9G 3% /dev/shm
tmpfs tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs tmpfs 2,0G 0 2,0G 0% /sys/fs/cgroup
/dev/loop0 squashfs 86M 86M 0 100% /snap/core/6675
/dev/loop1 squashfs 36M 36M 0 100% /snap/gtk-common-themes/1198
/dev/loop2 squashfs 86M 86M 0 100% /snap/core/6813
tmpfs tmpfs 392M 16K 392M 1% /run/user/122
tmpfs tmpfs 392M 36K 392M 1% /run/user/1000
Hors ligne
#23 Le 04/05/2019, à 10:16
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Puis (toujours depuis la session installée) procède à la sauvegarde de tes données.
As-tu sauvegardé TOUTES tes données ?
C’est très important car ce que je vais te proposer va réinstaller en écrasant tous les fichiers.
Hors ligne
#24 Le 06/05/2019, à 09:15
- Barbipède07
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Back up effectué!
Hors ligne
#25 Le 06/05/2019, à 15:57
- nany
Re : Pb boot après installation Ubuntu 18.04.2 LTS sur la 16.04 [Résolu]
Parfait. As-tu aussi sauvegardé les paramètres de Firefox et de Thunderbird ?
Si oui, allons-y. Démarre sur la clé en session live (essayer sans installer) puis lance l’installation, choisi le français, le clavier français (variante), puis poste une capture d’écran de l’étape suivante.
Hors ligne