#1 Le 24/04/2019, à 17:13
- dutohubohu
Wifi + Airport Express
Bonjour à tous,
Je rencontre un problème pour me connecter en wifi sur une borne Apple AirPort Express 1ère génération (manuel). Je tape le mot de passe, la connexion tente de s'établir puis la fenêtre d'authentification réapparaît, me demandant encore et toujours le mot de passe.
Pour info il s'agit d'une carte Realtek rtl8723bu et j'avais installé le pilote grâce au github de lwfinger. Je n'ai jamais rencontré de problème de connexion jusque là. Ci-dessous le wificheck :
>> cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.2 LTS"
>> lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 093a:733a Pixart Imaging, Inc.
Bus 001 Device 003: ID 0bda:b720 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> lspci -k -nn | grep -A 3 -i net
>> sudo lshw -C network
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:7
logical name: wlx88835d6adea6
serial: 88:83:5d:6a:de:a6
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8723bu multicast=yes wireless=unassociated
>> lsmod | sort
8250_dw 16384 0
8723bu 876544 0
ac97_bus 16384 1 snd_soc_core
acpi_thermal_rel 16384 1 int3400_thermal
aesni_intel 188416 0
aes_x86_64 20480 1 aesni_intel
ahci 40960 2
autofs4 40960 2
bluetooth 548864 33 btrtl,btintel,btbcm,bnep,btusb,rfcomm
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrtl 16384 1 btusb
btusb 45056 0
cfg80211 622592 1 8723bu
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd 16384 1 aesni_intel
drm 401408 15 drm_kms_helper,i915
drm_kms_helper 167936 1 i915
ecdh_generic 24576 1 bluetooth
fb_sys_fops 16384 1 drm_kms_helper
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hid 118784 2 i2c_hid,hid_multitouch
hid_multitouch 20480 0
i2c_algo_bit 16384 1 i915
i2c_hid 20480 0
i915 1617920 20
idma64 20480 6
input_leds 16384 0
int3400_thermal 16384 0
int3403_thermal 16384 0
int340x_thermal_zone 16384 2 int3403_thermal,processor_thermal_device
intel_cstate 20480 0
intel_hid 16384 0
intel_lpss 16384 1 intel_lpss_pci
intel_lpss_pci 20480 0
intel_pmc_ipc 20480 1 intel_telemetry_pltdrv
intel_powerclamp 16384 0
intel_punit_ipc 16384 1 intel_telemetry_pltdrv
intel_rapl 20480 0
intel_rapl_perf 16384 0
intel_soc_dts_iosf 16384 1 processor_thermal_device
intel_telemetry_core 16384 1 intel_telemetry_pltdrv
intel_telemetry_pltdrv 20480 0
ip_tables 28672 0
irqbypass 16384 1 kvm
joydev 24576 0
kvm 598016 1 kvm_intel
kvm_intel 212992 0
libahci 32768 1 ahci
lp 20480 0
lpc_ich 24576 0
mac_hid 16384 0
media 40960 2 videodev,uvcvideo
mei 90112 1 mei_me
mei_me 40960 0
memstick 16384 1 rtsx_usb_ms
mmc_block 36864 3
Module Size Used by
nls_iso8859_1 16384 1
parport 49152 3 parport_pc,lp,ppdev
parport_pc 36864 0
pcbc 16384 0
pinctrl_broxton 40960 1
ppdev 20480 0
processor_thermal_device 16384 0
psmouse 147456 0
rfcomm 77824 4
rtsx_usb 20480 2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms 20480 0
rtsx_usb_sdmmc 28672 0
sch_fq_codel 20480 5
sdhci 49152 1 sdhci_pci
sdhci_pci 32768 0
serio_raw 16384 0
snd 81920 25 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
snd_compress 20480 1 snd_soc_core
snd_hda_codec 126976 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 106496 1
snd_hda_core 81920 7 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_soc_skl
snd_hda_ext_core 24576 1 snd_soc_skl
snd_hda_intel 40960 6
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 98304 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_core,snd_soc_skl,snd_hda_core,snd_pcm_dmaengine
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi,snd_seq_midi_event
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_soc_acpi 16384 1 snd_soc_skl
snd_soc_core 241664 1 snd_soc_skl
snd_soc_skl 90112 0
snd_soc_skl_ipc 65536 1 snd_soc_skl
snd_soc_sst_dsp 32768 1 snd_soc_skl_ipc
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 intel_hid
spi_pxa2xx_platform 24576 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
uvcvideo 86016 0
video 45056 1 i915
videobuf2_core 40960 2 videobuf2_v4l2,uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 184320 3 videobuf2_core,videobuf2_v4l2,uvcvideo
virt_dma 16384 1 idma64
x86_pkg_temp_thermal 16384 0
x_tables 40960 1 ip_tables>> iwconfig
wlx88835d6adea6 unassociated Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency=2.437 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>> ifconfig -a
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 863 bytes 62702 (62.7 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 863 bytes 62702 (62.7 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlx88835d6adea6: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 88:83:5d:6a:de:a6 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 15 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>> sudo iwlist scan
wlx88835d6adea6 Scan completed :
Cell 01 - Address: 30:46:9A:5D:82:6C
ESSID:"missroger"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:144 Mb/s
Extra:wpa_ie=dd1c0050f20101000050f20202000050f2040050f20201000050f2020c00
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:rsn_ie=30180100000fac020200000fac04000fac020100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD810050F204104A00011010440001021041000100103B00010310470010597A565A76DF1B3A9B3632338210CDBE1021000D4E4554474541522C20496E632E10230009574E5232303030763210240009574E523230303076321042000230311054000800060050F204000110110009574E52323030307632100800020084103C000101
Quality=88/100 Signal level=61/100
Extra:fm=0003
Cell 02 - Address: E0:88:5D:AE:F5:67
ESSID:"HOME-F561-2.4"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:144 Mb/s
Extra:wpa_ie=dd1a0050f20101000050f20202000050f2040050f20201000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:rsn_ie=30180100000fac020200000fac04000fac020100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD8C0050F204104A0001101044000102103B000103104700106A72D18F9695EB38B48ECB8ED71016D71021000B546563686E69636F6C6F721023000B546563686E69636F6C6F721024000631323334353610420007303030303030311054000800060050F20400011011000D546563686E69636F6C6F724150100800022008103C0001031049000600372A000120
Quality=41/100 Signal level=61/100
Extra:fm=0003
Cell 03 - Address: 00:25:4B:08:A0:F5
ESSID:"Caramba"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=72/100 Signal level=92/100
Extra:fm=0003
Cell 04 - Address: E0:22:03:F2:48:D9
ESSID:"ATT4Keu9s2"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD810050F204104A0001101044000102103B00010310470010000000000000000000000000000000001021000450616365102300063532363841431024000631323334353610420004313233341054000800060050F204000110110011506163652041636365737320506F696E7410080002200C103C0001011049000600372A000120
Quality=58/100 Signal level=64/100
Extra:fm=0003
Cell 05 - Address: 3C:37:86:9D:DA:73
ESSID:"CO2"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD830050F204104A0001101044000102103B00010310470010844D82685446307A6BA721443AB9956D102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000C43363235302D3130304E4153100800022008103C0001031049000600372A000120
Quality=58/100 Signal level=68/100
Extra:fm=0003
Cell 06 - Address: B0:7F:B9:D8:87:43
ESSID:"NETGEAR21"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:300 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD800050F204104A0001101044000102103B00010310470010B4941B8541BBAA8F52F6D6BCA8F4F328102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F2040001101100094E6574676561724150100800022008103C0001011049000600372A000120
Quality=54/100 Signal level=58/100
Extra:fm=0003
>> uname -r -m
4.15.0-47-generic x86_64
>> cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
>> nm-tool
>> nmcli dev wifi
IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY
Caramba Infra 6 130 Mbit/s 89 ▂▄▆█ WPA2
CO2 Infra 11 130 Mbit/s 60 ▂▄▆_ WPA2
ATT4Keu9s2 Infra 11 130 Mbit/s 59 ▂▄▆_ WPA2
HOME-F561-2.4 Infra 1 195 Mbit/s 57 ▂▄▆_ WPA1 WPA2
missroger Infra 1 130 Mbit/s 57 ▂▄▆_ WPA1 WPA2
NETGEAR21 Infra 11 270 Mbit/s 55 ▂▄__ WPA2
HotspotA274 Infra 11 65 Mbit/s 49 ▂▄__ WPA1 WPA2
>> nmcli connection list (< 15.04) ou nmcli connection show (>= 15.04)
NAME UUID TYPE DEVICE
03ca82 3ea737e6-abf8-47c6-888c-7acc94c4dccd wifi --
46EE6E 2b5cc905-18e7-4381-ad6a-a6fb1fc5a9bb wifi --
Bbox-CC339556 c968883b-748c-4988-b832-65f8eb51d520 wifi --
Caramba 0770f3f0-4f2f-4709-9550-bebfef54c346 wifi --
FlixBus 4492f5e6-afec-46a9-9349-9ca2a4c2403a wifi --
Livebox-A88C 715c06fe-f5b3-4b72-aa9c-8d04390dc8d5 wifi --
PANERA 10c79b79-c663-4cd5-bedf-50231cc988e1 wifi --
SFR-9158 3a96ea70-0701-4471-bee0-e58fc52c225d wifi --
Sweetwaters Downtown 68030c4f-beaa-4701-8b15-22ec7f673d9f wifi --
_SNCF_WIFI_INTERCITES dc1e22e9-5ee6-4da6-aa24-e0fb9bfdc3e6 wifi --
freebox_ADF3D3 2d9bc606-9bcb-4f74-bf8b-a633e08dc0f6 wifi --
iPhone ec93c341-e7af-4377-add4-f6819e9f168a wifi --
lag-public bdf36ae7-d8c7-4a74-9a9c-f38dcdb734e9 wifi --
wifi Ouibus 067a6402-ccdf-4fba-8456-0948dee0608a wifi --
>> nmcli connection status
>> sudo rfkill list
0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: noEst-ce quelqu'un aurait une idée du problème svp ? Merci beaucoup et bonne soirée
Hors ligne
#2 Le 24/04/2019, à 17:33
- xubu1957
Re : Wifi + Airport Express
Bonjour,
Une réponse avec :
sudo modprobe 8723bu?
_ _ _
Tu as mis un seul chiffrement WPA2, comme indiqué au § 1 > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier ?
_ _ _
Dans > {RESOLU] Wifi invisible et déconnexion intempestive
Le 05/03/2014, pnouvell a écrit :
(...)
Dans les première minute mon réseau WIFI (distribué par une airport express ) était visible je n'avais pas de souci puis il est devenu invisible donc pas de problème je me connecte dans les réseaux invisibles mais il se déconnecte de facon intempestive aux 5Min et je suis obligé de me reconnecter.
Le 05/03/2014, toutafai a écrit :
Bonsoir,
Ta box utilise un chiffrement a problème car à la fois du wpa1 et du wpa2.... Change cela pour soit que du wpa1 tkip, soit (et mieux) que du wpa2 AES. N'oublie pas d'enregistrer les changements sur ta box et de la rebooter. Une fois qu'elle aura rebooté (et qu'elle sera a nouveau prête), sur ton ubuntu déconnecte toi de ton réseau wifi , puis reconnecte toi.
Test si c'est mieux.
PS : au passage , ta box est sur le canal 1 ou il y a déjà d'autres box, ce qui peut générer des problèmes.. profite que tu sera dans l'interface d'administration de ta box, pour changer de canal (d’après tes retours, il y a personne sur le 8 qui me parait être un bon choix... a tester)
Dernière modification par xubu1957 (Le 24/04/2019, à 17:48)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 24/04/2019, à 17:56
- dutohubohu
Re : Wifi + Airport Express
Bonjour,
sudo modprobe 8723bune renvoie rien. En revanche :
sudo modprobe -v rtl8723bume renvoie
insmod /lib/modules/4.15.0-47-generic/updates/dkms/rtl8723bu.koTu as mis un seul chiffrement WPA2, comme indiqué au § 1 > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier ?
Oui l'Airport Express est configuré en WPA2 Personal.
Hors ligne
#4 Le 24/04/2019, à 18:01
- xubu1957
Re : Wifi + Airport Express
Que donne :
dkms status?
(Edit= messages regroupés)
_ _ _
Essaye aussi :
sudo ip link set wlx88835d6adea6 upDernière modification par xubu1957 (Le 24/04/2019, à 18:05)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 24/04/2019, à 18:05
- dutohubohu
Re : Wifi + Airport Express
xubu1957 a écrit :
Que donne :
dkms status?
Voici la réponse :
rtl8723bu, 4.3.6.11_12942.20141204_BTCOEX20140507-4E40, 4.15.0-46-generic, x86_64: installed
rtl8723bu, 4.3.6.11_12942.20141204_BTCOEX20140507-4E40, 4.15.0-47-generic, x86_64: installed---
(Edit)
La commande
sudo ip link set wlx88835d6adea6 upne renvoie rien mais la connexion est toujours impossible.
Dernière modification par dutohubohu (Le 24/04/2019, à 18:19)
Hors ligne
#6 Le 24/04/2019, à 18:08
- xubu1957
Re : Wifi + Airport Express
J'ai édité le post #4.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#7 Le 24/04/2019, à 18:20
- dutohubohu
Re : Wifi + Airport Express
J'ai édité le post #5 également 
Hors ligne
#8 Le 24/04/2019, à 18:26
- xubu1957
Re : Wifi + Airport Express
Tu avais regardé la Doc > se_connecterdeconnecter_a_un_reseau_detecte_deja_configure ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#9 Le 24/04/2019, à 19:59
- xubu1957
Re : Wifi + Airport Express
Regarde cette réponse :
Le 08/03/2015, Anonyme a écrit :
Bonsoir,
Je te suggère de configurer l'AE manuellement : pour cela, le mieux est de la connecter par Ethernet à la box.
Dans Utilitaire Airport (UA) :
Onglet Borne d'accès : tu crées un nom (pour la borne) et un mot de passe (d'accès à la configuration de l'AE)
Onglet Internet : Connexion : via DHCP
Onglet Sans-fil : "Accéder à un réseau sans fil", nom du réseau sans fil = la box, sélectionne la sécurité, et saisis le mot de passe (du réseau wifi de la box)Pour appliquer : "Mettre à jour"
Tu peux vérifier que la configuration est réussie en débranchant le câble Ethernet : le voyant doit rester vert, et la borne doit être disponible pour Airplay dans iTunes (si la case est cochée dans l'onglet Airplay de UA).
> forums.macg.co/threads/configuration-airport-express-802-11n-1re-generation
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#10 Le 25/04/2019, à 06:00
- dutohubohu
Re : Wifi + Airport Express
La borne Airport est configurée comme dans la réponse que tu as citée.
Je n'y ai pensé que tardivement mais l'ordinateur possède un dual boot et la connexion fonctionne normalement lorsque je démarre sous W10. Il s'agirait donc d'un problème du pilote Linux de la carte wifi ?
Bonne journée
Hors ligne
#11 Le 25/04/2019, à 06:49
- xubu1957
Re : Wifi + Airport Express
Bonjour,
J'avais conservé cette réponse :
Le 10/01/2017, Bougron a écrit :
Bonjour.
(...)
- Désactiver le démarrage rapide de windows. Sous windows
powercfg /hibernate off
- Ne jamais stopper windows avec la fonctionnalité ARRETER mais toujours avec la fonctionnalité REDEMARRER lorsqu'on est susceptible de lancer ubuntu et d'utiliser des périphériques utilisés par windows : Les partitions NTFS, le WIFI et probablement le bluetooth.
Ce fonctionnement est lié au démarrage rapide de windows qui verrouille (via le bios) les périphériques afin d'être sur de les retrouver à l'identique lors de son démarrage qui ne refait pas les séquences d'initialisation.
- De stopper windows avec ARRETER que lorsqu'on est absolument sur que le prochain démarrage qu'on choisira de faire sera windows.(...)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#12 Le 28/04/2019, à 01:25
- dutohubohu
Re : Wifi + Airport Express
Bonjour,
J'avais bien modifié le comportement par défaut de W10 pour éviter le problème que tu cites dans ton dernier message. Ci-dessous le log de dmesg, on peut voir que je tente une connexion à partir de l'index 362. Est-ce qu'à la lecture de ces lignes, tu aurais une idée d'où vient le problème ?
[ 0.000000] microcode: microcode updated early to revision 0x32, date = 2018-05-11
[ 0.000000] Linux version 4.15.0-47-generic (buildd@lgw01-amd64-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #50-Ubuntu SMP Wed Mar 13 10:44:52 UTC 2019 (Ubuntu 4.15.0-47.50-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-47-generic root=UUID=06f6f799-aeab-4069-ad9e-37f8d04356da ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x00000000768c3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000768c4000-0x0000000079a01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079a02000-0x0000000079a1dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079a1e000-0x0000000079a81fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079a82000-0x0000000079dd6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079dd7000-0x0000000079e2bfff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000079e2c000-0x000000007a1a3fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a1a4000-0x000000007a1a4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007a1a5000-0x000000007a1cefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a1cf000-0x000000007a762fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a763000-0x000000007a764fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a765000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI=0x79a07000 ACPI 2.0=0x79a07000 SMBIOS=0x79c8f000 SMBIOS 3.0=0x79c8e000 ESRT=0x73702f18
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LDLC Mercure MH/Mercure MH, BIOS HK-BI-14-Y116AR120-AA54V-02-H 12/08/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-6FFFF write-back
[ 0.000000] 70000-7FFFF uncachable
[ 0.000000] 80000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 4 base 00FF800000 mask 7FFF800000 write-combining
[ 0.000000] 5 base 0090000000 mask 7FF0000000 write-through
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x0000000073702f18 to 0x0000000073702f50.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x11473f000, 0x11473ffff] PGTABLE
[ 0.000000] BRK [0x114740000, 0x114740fff] PGTABLE
[ 0.000000] BRK [0x114741000, 0x114741fff] PGTABLE
[ 0.000000] BRK [0x114742000, 0x114742fff] PGTABLE
[ 0.000000] BRK [0x114743000, 0x114743fff] PGTABLE
[ 0.000000] BRK [0x114744000, 0x114744fff] PGTABLE
[ 0.000000] BRK [0x114745000, 0x114745fff] PGTABLE
[ 0.000000] BRK [0x114746000, 0x114746fff] PGTABLE
[ 0.000000] BRK [0x114747000, 0x114747fff] PGTABLE
[ 0.000000] BRK [0x114748000, 0x114748fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x337d3000-0x35be0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000079A07000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x0000000079A070C0 0000EC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000079A0FF40 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x0000000079A07250 008CF0 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000079A81080 000040
[ 0.000000] ACPI: FPDT 0x0000000079A10060 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000079A100B0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x0000000079A10150 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x0000000079A101B0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: DBG2 0x0000000079A101F0 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: DBGP 0x0000000079A10270 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: HPET 0x0000000079A102B0 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: LPIT 0x0000000079A102F0 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: APIC 0x0000000079A10350 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: NPKT 0x0000000079A103E0 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: PRAM 0x0000000079A10450 000030 (v01 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: WSMT 0x0000000079A10480 000028 (v01 INTEL EDK2 00000003 BRXT 0100000D)
[ 0.000000] ACPI: SSDT 0x0000000079A104B0 00414C (v02 INTEL DptfTab 00000003 BRXT 0100000D)
[ 0.000000] ACPI: SSDT 0x0000000079A14600 003621 (v02 INTEL RVPRtd3 00000003 BRXT 0100000D)
[ 0.000000] ACPI: SSDT 0x0000000079A17C30 00077D (v02 INTEL UsbCTabl 00000003 BRXT 0100000D)
[ 0.000000] ACPI: SSDT 0x0000000079A183B0 001611 (v01 Intel_ Platform 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000079A199D0 00039D (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000079A19D70 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000079A1A4A0 00032D (v02 PmRef Cpu0Tst 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000079A1A7D0 00017C (v02 PmRef ApTst 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000079A1A950 002760 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000079A1D0B0 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: TPM2 0x0000000079A1D100 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: WDAT 0x0000000079A1D140 000104 (v01 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000003efff]
[ 0.000000] node 0: [mem 0x0000000000040000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000012151000-0x00000000768c3fff]
[ 0.000000] node 0: [mem 0x0000000079e2c000-0x000000007a1a3fff]
[ 0.000000] node 0: [mem 0x000000007a1cf000-0x000000007a762fff]
[ 0.000000] node 0: [mem 0x000000007a765000-0x000000007affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Reserved but unavailable: 42826 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.000000] On node 0 totalpages: 1005750
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7461 pages used for memmap
[ 0.000000] DMA32 zone: 477466 pages, LIFO batch:31
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x768c4000-0x79a01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79a02000-0x79a1dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79a1e000-0x79a81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79a82000-0x79dd6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79dd7000-0x79e2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a1a4000-0x7a1a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a1a5000-0x7a1cefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a763000-0x7a764fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 990010
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-47-generic root=UUID=06f6f799-aeab-4069-ad9e-37f8d04356da ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3728972K/4023000K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 294028K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 39206 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: Fast TSC calibration using PIT
[ 0.032000] tsc: Detected 1094.400 MHz processor
[ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.036138] Security Framework initialized
[ 0.036142] Yama: becoming mindful.
[ 0.036215] AppArmor: AppArmor initialized
[ 0.037875] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.038694] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.038772] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.038800] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.039438] mce: CPU supports 7 MCE banks
[ 0.039482] CPU0: Thermal monitoring enabled (TM1)
[ 0.039580] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.039582] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.039587] Spectre V2 : Mitigation: Full generic retpoline
[ 0.039588] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.039590] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.039591] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.059298] Freeing SMP alternatives memory: 36K
[ 0.069428] TSC deadline timer enabled
[ 0.069440] smpboot: CPU0: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[ 0.069705] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.069746] ... version: 4
[ 0.069747] ... bit width: 48
[ 0.069749] ... generic registers: 4
[ 0.069751] ... value mask: 0000ffffffffffff
[ 0.069753] ... max period: 00007fffffffffff
[ 0.069755] ... fixed-purpose events: 3
[ 0.069756] ... event mask: 000000070000000f
[ 0.069861] Hierarchical SRCU implementation.
[ 0.072000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.072000] smp: Bringing up secondary CPUs ...
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1 #2 #3
[ 0.076870] smp: Brought up 1 node, 4 CPUs
[ 0.076870] smpboot: Max logical packages: 1
[ 0.076870] smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
[ 0.080695] devtmpfs: initialized
[ 0.080695] x86/mm: Memory block size: 128MB
[ 0.081373] evm: security.selinux
[ 0.081375] evm: security.SMACK64
[ 0.081377] evm: security.SMACK64EXEC
[ 0.081378] evm: security.SMACK64TRANSMUTE
[ 0.081379] evm: security.SMACK64MMAP
[ 0.081381] evm: security.apparmor
[ 0.081382] evm: security.ima
[ 0.081384] evm: security.capability
[ 0.081430] PM: Registering ACPI NVS region [mem 0x79a1e000-0x79a81fff] (409600 bytes)
[ 0.081430] PM: Registering ACPI NVS region [mem 0x7a1a4000-0x7a1a4fff] (4096 bytes)
[ 0.081430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.081430] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.081430] pinctrl core: initialized pinctrl subsystem
[ 0.081430] RTC time: 23:00:55, date: 04/27/19
[ 0.085974] NET: Registered protocol family 16
[ 0.086220] audit: initializing netlink subsys (disabled)
[ 0.086237] audit: type=2000 audit(1556406054.084:1): state=initialized audit_enabled=0 res=1
[ 0.086237] cpuidle: using governor ladder
[ 0.086237] cpuidle: using governor menu
[ 0.086237] ACPI: bus type PCI registered
[ 0.086237] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086237] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.086237] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.086237] PCI: Using configuration type 1 for base access
[ 0.090849] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.090849] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.092028] ACPI: Added _OSI(Module Device)
[ 0.092028] ACPI: Added _OSI(Processor Device)
[ 0.092028] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092028] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.092028] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.092028] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.092028] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.092028] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.125714] ACPI: Dynamic OEM Table Load:
[ 0.125735] ACPI: SSDT 0xFFFF9AB2FA78FA00 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.127437] ACPI: Dynamic OEM Table Load:
[ 0.127452] ACPI: SSDT 0xFFFF9AB2FA78FC00 00015F (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.128407] ACPI: Dynamic OEM Table Load:
[ 0.128421] ACPI: SSDT 0xFFFF9AB2FA7766C0 00008D (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.132524] ACPI: EC: EC started
[ 0.132526] ACPI: EC: interrupt blocked
[ 0.240281] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as first EC
[ 0.240286] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.240291] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions
[ 0.240292] ACPI: Interpreter enabled
[ 0.240364] ACPI: (supports S0 S3 S4 S5)
[ 0.240368] ACPI: Using IOAPIC for interrupt routing
[ 0.240477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.241783] ACPI: GPE 0x0F active on init
[ 0.241861] ACPI: GPE 0x2C active on init
[ 0.241930] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.254108] ACPI: Power Resource [SPPR] (on)
[ 0.254761] ACPI: Power Resource [SPPR] (on)
[ 0.255708] ACPI: Power Resource [UPPR] (on)
[ 0.256371] ACPI: Power Resource [PX03] (on)
[ 0.257729] ACPI: Power Resource [UPPR] (on)
[ 0.258204] ACPI: Power Resource [UPPR] (on)
[ 0.259278] ACPI: Power Resource [UPPR] (on)
[ 0.259868] ACPI: Power Resource [UPPR] (on)
[ 0.260338] ACPI: Power Resource [UPPR] (on)
[ 0.260991] ACPI: Power Resource [USBC] (on)
[ 0.261402] ACPI: Power Resource [LSPR] (on)
[ 0.270798] ACPI: Power Resource [SDPR] (on)
[ 0.293400] ACPI: Power Resource [PXP] (on)
[ 0.438101] ACPI: Power Resource [PXP] (on)
[ 0.581201] ACPI: Power Resource [PXP] (off)
[ 0.583302] ACPI: Power Resource [PXP] (off)
[ 0.585431] ACPI: Power Resource [PAUD] (on)
[ 0.596875] ACPI: Power Resource [FN00] (on)
[ 0.599725] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.599743] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.602848] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.605778] PCI host bridge to bus 0000:00
[ 0.605784] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.605789] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.605793] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.605797] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.605801] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.605804] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[ 0.605808] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[ 0.605812] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.605816] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.605841] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[ 0.606831] pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000
[ 0.606884] pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
[ 0.607904] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[ 0.607932] pci 0000:00:02.0: reg 0x10: [mem 0x81000000-0x81ffffff 64bit]
[ 0.607947] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.607958] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.607998] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.609021] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
[ 0.609056] pci 0000:00:0e.0: reg 0x10: [mem 0x82110000-0x82113fff 64bit]
[ 0.609089] pci 0000:00:0e.0: reg 0x20: [mem 0x82000000-0x820fffff 64bit]
[ 0.609186] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.610232] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[ 0.610287] pci 0000:00:0f.0: reg 0x10: [mem 0x82139000-0x82139fff 64bit]
[ 0.610463] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.611350] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[ 0.611385] pci 0000:00:12.0: reg 0x10: [mem 0x82114000-0x82115fff]
[ 0.611397] pci 0000:00:12.0: reg 0x14: [mem 0x82136000-0x821360ff]
[ 0.611410] pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097]
[ 0.611422] pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.611434] pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.611448] pci 0000:00:12.0: reg 0x24: [mem 0x82135000-0x821357ff]
[ 0.611532] pci 0000:00:12.0: PME# supported from D3hot
[ 0.612482] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[ 0.612520] pci 0000:00:15.0: reg 0x10: [mem 0x82100000-0x8210ffff 64bit]
[ 0.612644] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.613533] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
[ 0.613573] pci 0000:00:16.0: reg 0x10: [mem 0x82134000-0x82134fff 64bit]
[ 0.613593] pci 0000:00:16.0: reg 0x18: [mem 0x82133000-0x82133fff 64bit]
[ 0.614530] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000
[ 0.614569] pci 0000:00:16.1: reg 0x10: [mem 0x82132000-0x82132fff 64bit]
[ 0.614588] pci 0000:00:16.1: reg 0x18: [mem 0x82131000-0x82131fff 64bit]
[ 0.615516] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
[ 0.615555] pci 0000:00:16.2: reg 0x10: [mem 0x82130000-0x82130fff 64bit]
[ 0.615575] pci 0000:00:16.2: reg 0x18: [mem 0x8212f000-0x8212ffff 64bit]
[ 0.616498] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000
[ 0.616539] pci 0000:00:16.3: reg 0x10: [mem 0x8212e000-0x8212efff 64bit]
[ 0.616577] pci 0000:00:16.3: reg 0x18: [mem 0x8212d000-0x8212dfff 64bit]
[ 0.617511] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
[ 0.617550] pci 0000:00:17.0: reg 0x10: [mem 0x8212c000-0x8212cfff 64bit]
[ 0.617569] pci 0000:00:17.0: reg 0x18: [mem 0x8212b000-0x8212bfff 64bit]
[ 0.618506] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000
[ 0.618544] pci 0000:00:17.1: reg 0x10: [mem 0x8212a000-0x8212afff 64bit]
[ 0.618563] pci 0000:00:17.1: reg 0x18: [mem 0x82129000-0x82129fff 64bit]
[ 0.619482] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000
[ 0.619533] pci 0000:00:17.2: reg 0x10: [mem 0x82128000-0x82128fff 64bit]
[ 0.619551] pci 0000:00:17.2: reg 0x18: [mem 0x82127000-0x82127fff 64bit]
[ 0.620473] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000
[ 0.620513] pci 0000:00:17.3: reg 0x10: [mem 0x82126000-0x82126fff 64bit]
[ 0.620532] pci 0000:00:17.3: reg 0x18: [mem 0x82125000-0x82125fff 64bit]
[ 0.621490] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
[ 0.621529] pci 0000:00:18.0: reg 0x10: [mem 0x82124000-0x82124fff 64bit]
[ 0.621548] pci 0000:00:18.0: reg 0x18: [mem 0x82123000-0x82123fff 64bit]
[ 0.622487] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
[ 0.622526] pci 0000:00:18.1: reg 0x10: [mem 0x82122000-0x82122fff 64bit]
[ 0.622544] pci 0000:00:18.1: reg 0x18: [mem 0x82121000-0x82121fff 64bit]
[ 0.623478] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
[ 0.623518] pci 0000:00:18.2: reg 0x10: [mem 0xfea10000-0xfea10fff 64bit]
[ 0.623538] pci 0000:00:18.2: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 0.624472] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
[ 0.624512] pci 0000:00:18.3: reg 0x10: [mem 0x82120000-0x82120fff 64bit]
[ 0.624531] pci 0000:00:18.3: reg 0x18: [mem 0x8211f000-0x8211ffff 64bit]
[ 0.625482] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
[ 0.625520] pci 0000:00:19.0: reg 0x10: [mem 0x8211e000-0x8211efff 64bit]
[ 0.625539] pci 0000:00:19.0: reg 0x18: [mem 0x8211d000-0x8211dfff 64bit]
[ 0.626452] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
[ 0.626490] pci 0000:00:19.1: reg 0x10: [mem 0x8211c000-0x8211cfff 64bit]
[ 0.626508] pci 0000:00:19.1: reg 0x18: [mem 0x8211b000-0x8211bfff 64bit]
[ 0.627450] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
[ 0.627488] pci 0000:00:19.2: reg 0x10: [mem 0x8211a000-0x8211afff 64bit]
[ 0.627507] pci 0000:00:19.2: reg 0x18: [mem 0x82119000-0x82119fff 64bit]
[ 0.628480] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
[ 0.628519] pci 0000:00:1c.0: reg 0x10: [mem 0x82118000-0x82118fff 64bit]
[ 0.628537] pci 0000:00:1c.0: reg 0x18: [mem 0x82117000-0x82117fff 64bit]
[ 0.629544] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[ 0.630601] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[ 0.630677] pci 0000:00:1f.1: reg 0x10: [mem 0x82116000-0x821160ff 64bit]
[ 0.630759] pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f]
[ 0.637372] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.637658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.637948] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.638222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.638494] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.638767] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.639042] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.639320] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.642795] ACPI Warning: GPE type mismatch (level/edge) (20170831/evxface-826)
[ 0.642804] ACPI: EC: interrupt unblocked
[ 0.642857] ACPI: EC: event unblocked
[ 0.642905] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.642909] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions and events
[ 0.643705] SCSI subsystem initialized
[ 0.643750] libata version 3.00 loaded.
[ 0.643750] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.643750] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.643750] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.643750] vgaarb: loaded
[ 0.644055] ACPI: bus type USB registered
[ 0.644094] usbcore: registered new interface driver usbfs
[ 0.644119] usbcore: registered new interface driver hub
[ 0.644162] usbcore: registered new device driver usb
[ 0.644282] EDAC MC: Ver: 3.0.0
[ 0.644282] Registered efivars operations
[ 0.669612] PCI: Using ACPI for IRQ routing
[ 0.700217] PCI: pci_cache_line_size set to 64 bytes
[ 0.700306] pci 0000:00:18.2: can't claim BAR 0 [mem 0xfea10000-0xfea10fff 64bit]: no compatible bridge window
[ 0.700401] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[ 0.700404] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.700406] e820: reserve RAM buffer [mem 0x768c4000-0x77ffffff]
[ 0.700409] e820: reserve RAM buffer [mem 0x7a1a4000-0x7bffffff]
[ 0.700412] e820: reserve RAM buffer [mem 0x7a763000-0x7bffffff]
[ 0.700414] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.700682] NetLabel: Initializing
[ 0.700684] NetLabel: domain hash size = 128
[ 0.700686] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.700729] NetLabel: unlabeled traffic allowed by default
[ 0.701197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.701216] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.704104] clocksource: Switched to clocksource hpet
[ 0.738968] VFS: Disk quotas dquot_6.6.0
[ 0.739013] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.739333] AppArmor: AppArmor Filesystem Enabled
[ 0.739424] pnp: PnP ACPI init
[ 0.739998] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.740069] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.740073] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.740077] system 00:00: [io 0x0600-0x061f] has been reserved
[ 0.740083] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.740100] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.742585] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.742591] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.742595] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.742600] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.742604] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.742608] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.742613] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.742617] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.742622] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.742635] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.742805] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.742903] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.743469] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.744851] pnp: PnP ACPI: found 5 devices
[ 0.757733] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.757780] pci 0000:00:18.2: BAR 0: assigned [mem 0x80008000-0x80008fff 64bit]
[ 0.757806] pci 0000:00:18.2: BAR 2: assigned [mem 0x80009000-0x80009fff 64bit]
[ 0.757826] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.757831] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.757834] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.757838] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.757842] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
[ 0.757846] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window]
[ 0.757850] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
[ 0.757854] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
[ 0.758297] NET: Registered protocol family 2
[ 0.758765] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.759030] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.759382] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.759499] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.759574] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.759762] NET: Registered protocol family 1
[ 0.759809] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.760721] PCI: CLS 0 bytes, default 64
[ 0.760842] Unpacking initramfs...
[ 2.168916] Freeing initrd memory: 36920K
[ 2.168925] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.168932] software IO TLB [mem 0x6d8d2000-0x718d2000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 2.169095] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 2.169163] clocksource: Switched to clocksource tsc
[ 2.169411] Scanning for low memory corruption every 60 seconds
[ 2.170993] Initialise system trusted keyrings
[ 2.171023] Key type blacklist registered
[ 2.171111] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 2.174410] zbud: loaded
[ 2.175791] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.176284] fuse init (API version 7.26)
[ 2.180398] Key type asymmetric registered
[ 2.180402] Asymmetric key parser 'x509' registered
[ 2.180517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 2.180626] io scheduler noop registered
[ 2.180629] io scheduler deadline registered
[ 2.180704] io scheduler cfq registered (default)
[ 2.181227] efifb: probing for efifb
[ 2.181265] efifb: framebuffer at 0x90000000, using 8128k, total 8128k
[ 2.181268] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 2.181269] efifb: scrolling: redraw
[ 2.181273] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.181562] Console: switching to colour frame buffer device 240x67
[ 2.181644] fb0: EFI VGA frame buffer device
[ 2.181676] intel_idle: MWAIT substates: 0x11242020
[ 2.181679] intel_idle: v0.4.1 model 0x5C
[ 2.182207] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.183123] ACPI: AC Adapter [ADP1] (on-line)
[ 2.183301] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/PNP0C09:00/PNP0C0D:00/input/input0
[ 2.183360] ACPI: Lid Switch [LID0]
[ 2.183478] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.183497] ACPI: Power Button [PWRB]
[ 2.189080] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.191392] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.191395] ACPI: Thermal Zone [TZ01] (40 C)
[ 2.191924] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.203501] Linux agpgart interface v0.103
[ 2.214086] ACPI: Battery Slot [BAT0] (battery present)
[ 2.217413] tpm tpm0: A TPM error (378) occurred get tpm pcr allocation
[ 2.222419] loop: module loaded
[ 2.222920] libphy: Fixed MDIO Bus: probed
[ 2.222923] tun: Universal TUN/TAP device driver, 1.6
[ 2.223058] PPP generic driver version 2.4.2
[ 2.223213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.223221] ehci-pci: EHCI PCI platform driver
[ 2.223247] ehci-platform: EHCI generic platform driver
[ 2.223281] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.223286] ohci-pci: OHCI PCI platform driver
[ 2.223306] ohci-platform: OHCI generic platform driver
[ 2.223323] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.223859] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.223876] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 2.225013] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 2.225026] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 2.225358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.225363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.225367] usb usb1: Product: xHCI Host Controller
[ 2.225370] usb usb1: Manufacturer: Linux 4.15.0-47-generic xhci-hcd
[ 2.225374] usb usb1: SerialNumber: 0000:00:15.0
[ 2.225727] hub 1-0:1.0: USB hub found
[ 2.225756] hub 1-0:1.0: 8 ports detected
[ 2.227838] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.227849] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 2.227859] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 2.227954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.227958] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.227962] usb usb2: Product: xHCI Host Controller
[ 2.227965] usb usb2: Manufacturer: Linux 4.15.0-47-generic xhci-hcd
[ 2.227969] usb usb2: SerialNumber: 0000:00:15.0
[ 2.228300] hub 2-0:1.0: USB hub found
[ 2.228327] hub 2-0:1.0: 7 ports detected
[ 2.230431] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.239902] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.239916] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.240345] mousedev: PS/2 mouse device common for all mice
[ 2.240829] rtc_cmos 00:04: RTC can wake from S4
[ 2.241383] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.241507] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.241524] i2c /dev entries driver
[ 2.241539] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 2.241758] device-mapper: uevent: version 1.0.3
[ 2.241965] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.241982] intel_pstate: Intel P-state driver initializing
[ 2.242875] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.242880] EFI Variables Facility v0.08 2004-May-17
[ 2.251788] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.272429] NET: Registered protocol family 10
[ 2.281637] Segment Routing with IPv6
[ 2.281680] NET: Registered protocol family 17
[ 2.281978] Key type dns_resolver registered
[ 2.283245] intel_rdt: Intel RDT L2 allocation detected
[ 2.283286] RAS: Correctable Errors collector initialized.
[ 2.283392] microcode: sig=0x506c9, pf=0x1, revision=0x32
[ 2.283634] microcode: Microcode Update Driver: v2.2.
[ 2.283659] sched_clock: Marking stable (2283621664, 0)->(2255542385, 28079279)
[ 2.284081] registered taskstats version 1
[ 2.284097] Loading compiled-in X.509 certificates
[ 2.288693] Loaded X.509 cert 'Build time autogenerated kernel key: 7211859d1298c08a101905a3cb814e8c7b4bf4a4'
[ 2.290250] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 2.290287] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 2.290792] Couldn't get size: 0x800000000000000e
[ 2.290797] MODSIGN: Couldn't get UEFI MokListRT
[ 2.292434] zswap: loaded using pool lzo/zbud
[ 2.299487] Key type big_key registered
[ 2.299494] Key type trusted registered
[ 2.303115] Key type encrypted registered
[ 2.303123] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.303128] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 2.303146] ima: Allocated hash algorithm: sha1
[ 2.303178] evm: HMAC attrs: 0x1
[ 2.303952] Magic number: 15:419:50
[ 2.304294] rtc_cmos 00:04: setting system clock to 2019-04-27 23:00:57 UTC (1556406057)
[ 2.304614] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.304616] EDD information not available.
[ 2.560134] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 2.708630] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129
[ 2.708634] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.708636] usb 1-4: Product: USB2.0-CRW
[ 2.708638] usb 1-4: Manufacturer: Generic
[ 2.708640] usb 1-4: SerialNumber: 20100201396000000
[ 2.836131] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 2.963885] Freeing unused kernel memory: 2408K
[ 2.980339] Write protecting the kernel read-only data: 20480k
[ 2.982867] Freeing unused kernel memory: 2008K
[ 2.985059] usb 1-7: New USB device found, idVendor=0bda, idProduct=b720
[ 2.985063] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.985065] usb 1-7: Product: 802.11n WLAN Adapter
[ 2.985067] usb 1-7: Manufacturer: Realtek
[ 2.985069] usb 1-7: SerialNumber: 00e04c000001
[ 2.989520] Freeing unused kernel memory: 1892K
[ 3.001755] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.120046] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[ 3.156688] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.167496] ahci 0000:00:12.0: version 3.0
[ 3.169447] sdhci: Secure Digital Host Controller Interface driver
[ 3.169449] sdhci: Copyright(c) Pierre Ossman
[ 3.177973] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 3.177980] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
[ 3.179542] scsi host0: ahci
[ 3.184344] scsi host1: ahci
[ 3.184471] ata1: SATA max UDMA/133 abar m2048@0x82135000 port 0x82135100 irq 121
[ 3.184475] ata2: SATA max UDMA/133 abar m2048@0x82135000 port 0x82135180 irq 121
[ 3.184560] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b)
[ 3.188799] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[ 3.293028] usb 1-8: New USB device found, idVendor=093a, idProduct=733a
[ 3.293033] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.293035] usb 1-8: Product: VGA Webcam
[ 3.293038] usb 1-8: Manufacturer: VGA Webcam
[ 3.296794] mmc0: new HS400 MMC card at address 0001
[ 3.300738] mmcblk0: mmc0:0001 DF4064 58.2 GiB
[ 3.300992] mmcblk0boot0: mmc0:0001 DF4064 partition 1 4.00 MiB
[ 3.302334] mmcblk0boot1: mmc0:0001 DF4064 partition 2 4.00 MiB
[ 3.303078] mmcblk0rpmb: mmc0:0001 DF4064 partition 3 4.00 MiB, chardev (243:0)
[ 3.305484] random: fast init done
[ 3.306555] mmcblk0: p1 p2 p3 p4
[ 3.306725] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.306758] usbcore: registered new interface driver rtsx_usb
[ 3.306795] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.306802] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.499463] ata1: SATA link down (SStatus 4 SControl 300)
[ 3.660324] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.661792] ata2.00: ATA-9: SanDisk SSD PLUS 120 GB, UE3600RL, max UDMA/133
[ 3.661799] ata2.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.667573] ata2.00: configured for UDMA/133
[ 3.668173] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 3.668890] sd 1:0:0:0: [sda] 234455040 512-byte logical blocks: (120 GB/112 GiB)
[ 3.668911] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.668913] sd 1:0:0:0: [sda] Write Protect is off
[ 3.668916] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.668945] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.672846] sda: sda1 sda2
[ 3.673795] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.778959] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.120632] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.206123] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.224778] systemd[1]: Detected architecture x86-64.
[ 4.230346] systemd[1]: Set hostname to <raphpc>.
[ 4.702845] systemd[1]: Created slice System Slice.
[ 4.703081] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.703190] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.703319] systemd[1]: Listening on Journal Socket.
[ 4.704684] systemd[1]: Starting Uncomplicated firewall...
[ 4.706187] systemd[1]: Mounting Kernel Debug File System...
[ 4.707954] systemd[1]: Starting Set the console keyboard layout...
[ 4.734753] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 4.789519] lp: driver loaded but no devices found
[ 4.801832] ppdev: user-space parallel port driver
[ 4.832534] Adding 902668k swap on /swapfile. Priority:-2 extents:4 across:927244k SSFS
[ 4.867624] systemd-journald[258]: Received request to flush runtime journal from PID 1
[ 5.657991] input: Intel HID events as /devices/platform/INT33D5:00/input/input5
[ 5.658113] intel-hid INT33D5:00: platform supports 5 button array
[ 5.658169] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input6
[ 5.666956] int3403 thermal: probe of INT3403:05 failed with error -22
[ 5.742733] random: crng init done
[ 5.742736] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.752216] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.759571] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.766159] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 5.770823] i2c_hid i2c-SYNA3602:00: i2c-SYNA3602:00 supply vdd not found, using dummy regulator
[ 5.899890] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 5.911623] idma64 idma64.4: Found Intel integrated DMA 64-bit
[ 5.920249] [drm] Memory usable by graphics device = 4096M
[ 5.920256] checking generic (90000000 7f0000) vs hw (90000000 10000000)
[ 5.920257] fb: switching to inteldrmfb from EFI VGA
[ 5.920325] Console: switching to colour dummy device 80x25
[ 5.920490] [drm] Replacing VGA console driver
[ 5.920683] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.920684] [drm] Driver supports precise vblank timestamp query.
[ 5.920852] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.923132] media: Linux media interface: v0.10
[ 5.928758] Bluetooth: Core ver 2.22
[ 5.928792] NET: Registered protocol family 31
[ 5.928793] Bluetooth: HCI device and connection manager initialized
[ 5.928799] Bluetooth: HCI socket layer initialized
[ 5.928803] Bluetooth: L2CAP socket layer initialized
[ 5.928810] Bluetooth: SCO socket layer initialized
[ 5.937785] usbcore: registered new interface driver btusb
[ 5.940086] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 5.940513] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 5.940517] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 5.942831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.943454] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 5.947166] Linux video capture interface: v2.00
[ 5.949072] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 5.962369] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.963099] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 5.966366] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.969696] idma64 idma64.7: Found Intel integrated DMA 64-bit
[ 5.976133] idma64 idma64.8: Found Intel integrated DMA 64-bit
[ 5.976761] idma64 idma64.9: Found Intel integrated DMA 64-bit
[ 5.977934] idma64 idma64.12: Found Intel integrated DMA 64-bit
[ 5.978404] idma64 idma64.13: Found Intel integrated DMA 64-bit
[ 5.978810] idma64 idma64.14: Found Intel integrated DMA 64-bit
[ 5.979779] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 5.979787] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 6.002398] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
[ 6.010301] Bluetooth: hci0: rom_version status=0 version=1
[ 6.010322] Bluetooth: hci0: cfg_sz 0, total size 22496
[ 6.016409] PKCS#7 signature not signed with a trusted key
[ 6.016441] 8723bu: loading out-of-tree module taints kernel.
[ 6.017353] 8723bu: module verification failed: signature and/or required key missing - tainting kernel
[ 6.038748] RTL871X: module init start
[ 6.038752] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
[ 6.038753] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
[ 6.049329] uvcvideo: Found UVC 1.00 device VGA Webcam (093a:733a)
[ 6.068510] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 6.068515] uvcvideo 1-8:1.0: Entity type for entity Processing 3 was not initialized!
[ 6.068517] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 6.068646] input: VGA Webcam: VGA Webcam as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/input/input8
[ 6.068812] usbcore: registered new interface driver uvcvideo
[ 6.068814] USB Video Class driver (1.1.1)
[ 6.092665] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.092668] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.092669] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.092670] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.092671] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.123011] SSE version of gcm_enc/dec engaged.
[ 6.130566] RTL871X: rtw_ndev_init(wlan0)
[ 6.131009] usbcore: registered new interface driver rtl8723bu
[ 6.131011] RTL871X: module init ret=0
[ 6.309317] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[ 6.309359] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[ 6.309400] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
[ 6.309441] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[ 6.309482] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[ 6.309522] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[ 6.309563] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[ 6.309645] EDAC pnd2: b_cr_slice_channel_hash=80000dbc00000244 ret=0
[ 6.309686] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[ 6.309728] EDAC pnd2: d_cr_drp0=01048c0a1 ret=0
[ 6.309769] EDAC pnd2: d_cr_drp0=01048c0a1 ret=0
[ 6.309810] EDAC pnd2: d_cr_drp0=01048c0a1 ret=0
[ 6.309852] EDAC pnd2: d_cr_drp0=01048c0a1 ret=0
[ 6.309853] EDAC pnd2: Unsupported DIMM in channel 0
[ 6.309854] EDAC pnd2: Unsupported DIMM in channel 1
[ 6.309855] EDAC pnd2: Unsupported DIMM in channel 2
[ 6.309856] EDAC pnd2: Unsupported DIMM in channel 3
[ 6.309857] EDAC pnd2: Failed to register device with error -22.
[ 6.331566] intel_telemetry_core Init
[ 6.375098] intel_rapl: Found RAPL domain package
[ 6.375103] intel_rapl: Found RAPL domain core
[ 6.375106] intel_rapl: Found RAPL domain uncore
[ 6.375108] intel_rapl: Found RAPL domain dram
[ 6.527646] fbcon: inteldrmfb (fb0) is primary device
[ 6.527791] Console: switching to colour frame buffer device 240x67
[ 6.527841] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.531930] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.616151] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.616156] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.616158] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 6.616160] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.616161] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.616164] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 6.616166] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 6.641260] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[ 6.641350] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[ 6.641435] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[ 6.641523] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[ 6.641606] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
[ 6.641679] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
[ 6.641758] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
[ 6.675980] input: SYNA3602:00 0911:5288 Touchpad as /devices/pci0000:00/0000:00:16.2/i2c_designware.2/i2c-2/i2c-SYNA3602:00/0018:0911:5288.0001/input/input17
[ 6.676666] hid-multitouch 0018:0911:5288.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA3602:00 0911:5288] on i2c-SYNA3602:00
[ 6.778989] rtl8723bu 1-7:1.2 wlx88835d6adea6: renamed from wlan0
[ 6.828333] dw-apb-uart.8: ttyS4 at MMIO 0x82124000 (irq = 4, base_baud = 115200) is a 16550A
[ 6.956411] dw-apb-uart.9: ttyS5 at MMIO 0x82122000 (irq = 5, base_baud = 115200) is a 16550A
[ 7.084485] dw-apb-uart.10: ttyS6 at MMIO 0x80008000 (irq = 6, base_baud = 115200) is a 16550A
[ 7.212532] dw-apb-uart.11: ttyS7 at MMIO 0x82120000 (irq = 7, base_baud = 115200) is a 16550A
[ 7.808310] [drm] RC6 on
[ 8.851974] audit: type=1400 audit(1556406064.039:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=747 comm="apparmor_parser"
[ 8.851983] audit: type=1400 audit(1556406064.039:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=747 comm="apparmor_parser"
[ 8.851986] audit: type=1400 audit(1556406064.039:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=747 comm="apparmor_parser"
[ 8.852659] audit: type=1400 audit(1556406064.043:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=748 comm="apparmor_parser"
[ 8.853703] audit: type=1400 audit(1556406064.043:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=749 comm="apparmor_parser"
[ 8.853930] audit: type=1400 audit(1556406064.043:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=744 comm="apparmor_parser"
[ 8.853935] audit: type=1400 audit(1556406064.043:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=744 comm="apparmor_parser"
[ 8.853939] audit: type=1400 audit(1556406064.043:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=744 comm="apparmor_parser"
[ 8.853943] audit: type=1400 audit(1556406064.043:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=744 comm="apparmor_parser"
[ 8.855726] audit: type=1400 audit(1556406064.043:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=751 comm="apparmor_parser"
[ 9.126940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.126943] Bluetooth: BNEP filters: protocol multicast
[ 9.126950] Bluetooth: BNEP socket layer initialized
[ 9.826018] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 10.496090] RTL871X: RTW_ADAPTIVITY_EN_
[ 10.496096] AUTO, chplan:0x20, Regulation:0,0
[ 10.496097] RTL871X: RTW_ADAPTIVITY_MODE_
[ 10.496098] NORMAL
[ 11.045347] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 11.216807] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 13.873378] RTL871X: nolinked power save enter
[ 14.662470] RTL871X: RTW_ADAPTIVITY_EN_
[ 14.662476] AUTO, chplan:0x20, Regulation:0,0
[ 14.662477] RTL871X: RTW_ADAPTIVITY_MODE_
[ 14.662478] NORMAL
[ 15.217053] RTL871X: nolinked power save leave
[ 17.305508] RTL871X: nolinked power save enter
[ 37.691162] RTL871X: RTW_ADAPTIVITY_EN_
[ 37.691168] AUTO, chplan:0x20, Regulation:0,0
[ 37.691169] RTL871X: RTW_ADAPTIVITY_MODE_
[ 37.691170] NORMAL
[ 38.204942] RTL871X: nolinked power save leave
[ 40.293532] RTL871X: nolinked power save enter
[ 56.066176] Bluetooth: RFCOMM TTY layer initialized
[ 56.066185] Bluetooth: RFCOMM socket layer initialized
[ 56.066198] Bluetooth: RFCOMM ver 1.11
[ 58.767915] rfkill: input handler disabled
[ 70.690313] RTL871X: RTW_ADAPTIVITY_EN_
[ 70.690319] AUTO, chplan:0x20, Regulation:0,0
[ 70.690319] RTL871X: RTW_ADAPTIVITY_MODE_
[ 70.690320] NORMAL
[ 71.312813] RTL871X: nolinked power save leave
[ 73.402415] RTL871X: nolinked power save enter
[ 113.690453] RTL871X: RTW_ADAPTIVITY_EN_
[ 113.690459] AUTO, chplan:0x20, Regulation:0,0
[ 113.690460] RTL871X: RTW_ADAPTIVITY_MODE_
[ 113.690461] NORMAL
[ 114.289206] RTL871X: nolinked power save leave
[ 116.377385] RTL871X: nolinked power save enter
[ 166.698315] RTL871X: RTW_ADAPTIVITY_EN_
[ 166.698321] AUTO, chplan:0x20, Regulation:0,0
[ 166.698322] RTL871X: RTW_ADAPTIVITY_MODE_
[ 166.698322] NORMAL
[ 167.296813] RTL871X: nolinked power save leave
[ 169.176634] RTL871X: nolinked power save enter
[ 229.682329] RTL871X: RTW_ADAPTIVITY_EN_
[ 229.682335] AUTO, chplan:0x20, Regulation:0,0
[ 229.682336] RTL871X: RTW_ADAPTIVITY_MODE_
[ 229.682337] NORMAL
[ 230.260835] RTL871X: nolinked power save leave
[ 232.360763] RTL871X: nolinked power save enter
[ 292.718288] RTL871X: RTW_ADAPTIVITY_EN_
[ 292.718294] AUTO, chplan:0x20, Regulation:0,0
[ 292.718295] RTL871X: RTW_ADAPTIVITY_MODE_
[ 292.718295] NORMAL
[ 293.228814] RTL871X: nolinked power save leave
[ 295.364625] RTL871X: nolinked power save enter
[ 355.658658] RTL871X: RTW_ADAPTIVITY_EN_
[ 355.658664] AUTO, chplan:0x20, Regulation:0,0
[ 355.658665] RTL871X: RTW_ADAPTIVITY_MODE_
[ 355.658666] NORMAL
[ 356.237360] RTL871X: nolinked power save leave
[ 358.329424] RTL871X: nolinked power save enter
[ 362.165930] RTL871X: RTW_ADAPTIVITY_EN_
[ 362.165937] AUTO, chplan:0x20, Regulation:0,0
[ 362.165937] RTL871X: RTW_ADAPTIVITY_MODE_
[ 362.165938] NORMAL
[ 362.750183] RTL871X: nolinked power save leave
[ 362.958945] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 363.061792] RTL871X: start auth
[ 363.063519] RTL871X: auth success, start assoc
[ 366.392985] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 366.645606] RTL871X: start auth
[ 366.647405] RTL871X: auth success, start assoc
[ 370.256603] RTL871X: nolinked power save enter
[ 370.922228] RTL871X: RTW_ADAPTIVITY_EN_
[ 370.922234] AUTO, chplan:0x20, Regulation:0,0
[ 370.922235] RTL871X: RTW_ADAPTIVITY_MODE_
[ 370.922235] NORMAL
[ 371.520896] RTL871X: nolinked power save leave
[ 371.730173] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 371.765591] RTL871X: start auth
[ 371.767739] RTL871X: auth success, start assoc
[ 375.970181] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 376.271210] RTL871X: start auth
[ 376.272949] RTL871X: auth success, start assoc
[ 382.239385] RTL871X: nolinked power save enter
[ 383.538252] RTL871X: RTW_ADAPTIVITY_EN_
[ 383.538258] AUTO, chplan:0x20, Regulation:0,0
[ 383.538258] RTL871X: RTW_ADAPTIVITY_MODE_
[ 383.538259] NORMAL
[ 384.160816] RTL871X: nolinked power save leave
[ 386.041103] RTL871X: nolinked power save enter
[ 392.571134] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 393.230431] RTL871X: RTW_ADAPTIVITY_EN_
[ 393.230436] AUTO, chplan:0x20, Regulation:0,0
[ 393.230437] RTL871X: RTW_ADAPTIVITY_MODE_
[ 393.230438] NORMAL
[ 393.852873] RTL871X: nolinked power save leave
[ 395.941642] RTL871X: nolinked power save enter
[ 396.650433] RTL871X: RTW_ADAPTIVITY_EN_
[ 396.650439] AUTO, chplan:0x20, Regulation:0,0
[ 396.650440] RTL871X: RTW_ADAPTIVITY_MODE_
[ 396.650441] NORMAL
[ 397.160817] RTL871X: nolinked power save leave
[ 399.257413] RTL871X: nolinked power save enter
[ 419.658313] RTL871X: RTW_ADAPTIVITY_EN_
[ 419.658319] AUTO, chplan:0x20, Regulation:0,0
[ 419.658320] RTL871X: RTW_ADAPTIVITY_MODE_
[ 419.658321] NORMAL
[ 420.281246] RTL871X: nolinked power save leave
[ 422.369664] RTL871X: nolinked power save enterMerci!
Hors ligne
#13 Le 28/04/2019, à 07:04
- xubu1957
Re : Wifi + Airport Express
Bonjour,
Bien avant, on voit une recherche de l'IPv6 :
[ 9.826018] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 10.496090] RTL871X: RTW_ADAPTIVITY_EN_
[ 10.496096] AUTO, chplan:0x20, Regulation:0,0
[ 10.496097] RTL871X: RTW_ADAPTIVITY_MODE_
[ 10.496098] NORMAL
[ 11.045347] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 11.216807] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not readyIl faudrait aussi fouiller dans les discussions > github.com/lwfinger/rtl8723bu/issues
_ _ _
[ 10.496090] RTL871X: RTW_ADAPTIVITY_EN_
[ 10.496096] AUTO, chplan:0x20, Regulation:0,0
[ 10.496097] RTL871X: RTW_ADAPTIVITY_MODE_
[ 10.496098] NORMAL
[ 11.045347] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 11.216807] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 13.873378] RTL871X: nolinked power save enter
[ 14.662470] RTL871X: RTW_ADAPTIVITY_EN_
[ 14.662476] AUTO, chplan:0x20, Regulation:0,0
[ 14.662477] RTL871X: RTW_ADAPTIVITY_MODE_
[ 14.662478] NORMAL
[ 15.217053] RTL871X: nolinked power save leave
[ 17.305508] RTL871X: nolinked power save enter
[ 37.691162] RTL871X: RTW_ADAPTIVITY_EN_
[ 37.691168] AUTO, chplan:0x20, Regulation:0,0
[ 37.691169] RTL871X: RTW_ADAPTIVITY_MODE_
[ 37.691170] NORMAL
[ 38.204942] RTL871X: nolinked power save leave
[ 40.293532] RTL871X: nolinked power save enter
[ 56.066176] Bluetooth: RFCOMM TTY layer initialized
[ 56.066185] Bluetooth: RFCOMM socket layer initialized
[ 56.066198] Bluetooth: RFCOMM ver 1.11
[ 58.767915] rfkill: input handler disabled
[ 70.690313] RTL871X: RTW_ADAPTIVITY_EN_
[ 70.690319] AUTO, chplan:0x20, Regulation:0,0
[ 70.690319] RTL871X: RTW_ADAPTIVITY_MODE_
[ 70.690320] NORMAL
[ 71.312813] RTL871X: nolinked power save leave
[ 73.402415] RTL871X: nolinked power save enter
[ 113.690453] RTL871X: RTW_ADAPTIVITY_EN_
[ 113.690459] AUTO, chplan:0x20, Regulation:0,0
[ 113.690460] RTL871X: RTW_ADAPTIVITY_MODE_
[ 113.690461] NORMAL
[ 114.289206] RTL871X: nolinked power save leave
[ 116.377385] RTL871X: nolinked power save enter
[ 166.698315] RTL871X: RTW_ADAPTIVITY_EN_
[ 166.698321] AUTO, chplan:0x20, Regulation:0,0
[ 166.698322] RTL871X: RTW_ADAPTIVITY_MODE_
[ 166.698322] NORMAL
[ 167.296813] RTL871X: nolinked power save leave
[ 169.176634] RTL871X: nolinked power save enter
[ 229.682329] RTL871X: RTW_ADAPTIVITY_EN_
[ 229.682335] AUTO, chplan:0x20, Regulation:0,0
[ 229.682336] RTL871X: RTW_ADAPTIVITY_MODE_
[ 229.682337] NORMAL
[ 230.260835] RTL871X: nolinked power save leave
[ 232.360763] RTL871X: nolinked power save enter
[ 292.718288] RTL871X: RTW_ADAPTIVITY_EN_
[ 292.718294] AUTO, chplan:0x20, Regulation:0,0
[ 292.718295] RTL871X: RTW_ADAPTIVITY_MODE_
[ 292.718295] NORMAL
[ 293.228814] RTL871X: nolinked power save leave
[ 295.364625] RTL871X: nolinked power save enter
[ 355.658658] RTL871X: RTW_ADAPTIVITY_EN_
[ 355.658664] AUTO, chplan:0x20, Regulation:0,0
[ 355.658665] RTL871X: RTW_ADAPTIVITY_MODE_
[ 355.658666] NORMAL
[ 356.237360] RTL871X: nolinked power save leave
[ 358.329424] RTL871X: nolinked power save enter
[ 362.165930] RTL871X: RTW_ADAPTIVITY_EN_
[ 362.165937] AUTO, chplan:0x20, Regulation:0,0
[ 362.165937] RTL871X: RTW_ADAPTIVITY_MODE_
[ 362.165938] NORMAL
[ 362.750183] RTL871X: nolinked power save leave
[ 362.958945] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 363.061792] RTL871X: start auth
[ 363.063519] RTL871X: auth success, start assoc
[ 366.392985] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 366.645606] RTL871X: start auth
[ 366.647405] RTL871X: auth success, start assoc
[ 370.256603] RTL871X: nolinked power save enter
[ 370.922228] RTL871X: RTW_ADAPTIVITY_EN_
[ 370.922234] AUTO, chplan:0x20, Regulation:0,0
[ 370.922235] RTL871X: RTW_ADAPTIVITY_MODE_
[ 370.922235] NORMAL
[ 371.520896] RTL871X: nolinked power save leave
[ 371.730173] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 371.765591] RTL871X: start auth
[ 371.767739] RTL871X: auth success, start assoc
[ 375.970181] RTL871X: rtw_set_802_11_connect(wlx88835d6adea6) fw_state=0x00000008
[ 376.271210] RTL871X: start auth
[ 376.272949] RTL871X: auth success, start assoc
[ 382.239385] RTL871X: nolinked power save enter
[ 383.538252] RTL871X: RTW_ADAPTIVITY_EN_
[ 383.538258] AUTO, chplan:0x20, Regulation:0,0
[ 383.538258] RTL871X: RTW_ADAPTIVITY_MODE_
[ 383.538259] NORMAL
[ 384.160816] RTL871X: nolinked power save leave
[ 386.041103] RTL871X: nolinked power save enter
[ 392.571134] IPv6: ADDRCONF(NETDEV_UP): wlx88835d6adea6: link is not ready
[ 393.230431] RTL871X: RTW_ADAPTIVITY_EN_
[ 393.230436] AUTO, chplan:0x20, Regulation:0,0
[ 393.230437] RTL871X: RTW_ADAPTIVITY_MODE_
[ 393.230438] NORMAL
[ 393.852873] RTL871X: nolinked power save leave
[ 395.941642] RTL871X: nolinked power save enter
[ 396.650433] RTL871X: RTW_ADAPTIVITY_EN_
[ 396.650439] AUTO, chplan:0x20, Regulation:0,0
[ 396.650440] RTL871X: RTW_ADAPTIVITY_MODE_
[ 396.650441] NORMAL
[ 397.160817] RTL871X: nolinked power save leave
[ 399.257413] RTL871X: nolinked power save enter
[ 419.658313] RTL871X: RTW_ADAPTIVITY_EN_
[ 419.658319] AUTO, chplan:0x20, Regulation:0,0
[ 419.658320] RTL871X: RTW_ADAPTIVITY_MODE_
[ 419.658321] NORMAL
[ 420.281246] RTL871X: nolinked power save leave
[ 422.369664] RTL871X: nolinked power save enterAutre piste :
Le 23/10/2017, Toobuntu a écrit :
@ Coeur Noir
blacklister rtl8xxxu et RTL871X a résolu le probleme , merci
> Dongle usb bluetooth + wifi 0bda:b720 realtek
Dernière modification par xubu1957 (Le 28/04/2019, à 07:14)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#14 Le 01/05/2019, à 02:24
- dutohubohu
Re : Wifi + Airport Express
Bonjour,
Merci pour les liens. Je n'ai pas encore lu toutes les issues sur le GitHub. En revanche j'ai tenté de blacklister le RTL871X dans /etc/modprobe.d/blacklist.conf sans effet sur le problème. Pour info je peux me connecter à l'Airport Express par l'intermédiaire d'un autre ordinateur qui joue le rôle de hotspot. Mais toujours pas de connexion directement à l'AE donc.
J'ai lancé le script wireless-info, voici le retour ci-dessous :
########## wireless info START ##########
Report from: 30 Apr 2019 15:13 EDT -0400
Booted last: 30 Apr 2019 00:00 EDT -0400
Script from: 22 Oct 2018 03:34 UTC +0000
##### release ###########################
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic
##### kernel ############################
Linux 4.15.0-47-generic #50-Ubuntu SMP Wed Mar 13 10:44:52 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
##### desktop ###########################
Ubuntu
##### lspci #############################
##### lsusb #############################
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 093a:733a Pixart Imaging, Inc.
Bus 001 Device 003: ID 0bda:b720 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
##### secure boot #######################
SecureBoot disabled
##### lsmod #############################
cfg80211 622592 1 8723bu
##### interfaces ########################
[/etc/network/interfaces]
auto lo
iface lo inet loopback
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlx<IF from MAC [IF1]>: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether <MAC 'wlx<IF from MAC [IF1]>' [IF1]> brd <MAC address>
##### iwconfig ##########################
lo no wireless extensions.
wlx<IF from MAC [IF1]> unassociated Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency=2.437 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
##### route #############################
##### resolv.conf #######################
[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']
nameserver 127.0.0.53
options edns0
##### network managers ##################
Installed:
NetworkManager
Running:
root 846 1 1 15:10 ? 00:00:01 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: wlx<IF from MAC [IF1]>
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Realtek
GENERAL.PRODUCT: 802.11n WLAN Adapter
GENERAL.DRIVER: rtl8723bu
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR: <MAC 'wlx<IF from MAC [IF1]>' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 30 (disconnected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.2/net/wlx<IF from MAC [IF1]>
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: yes
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{13}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: 620bf623-2e2b-461c-adf3-011cd7812846 | Caramba
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
Caramba <MAC 'Caramba' [AC5]> Infra 6 2437 MHz 130 Mbit/s 92 ▂▄▆█ WPA2 no
CO2 <MAC 'CO2' [AC4]> Infra 6 2437 MHz 130 Mbit/s 87 ▂▄▆█ WPA2 no
NETGEAR21 <MAC 'NETGEAR21' [AC8]> Infra 11 2462 MHz 270 Mbit/s 67 ▂▄▆_ WPA2 no
missroger <MAC 'missroger' [AC1]> Infra 1 2412 MHz 130 Mbit/s 65 ▂▄▆_ WPA1 WPA2 no
ATT4Keu9s2 <MAC 'ATT4Keu9s2' [AC7]> Infra 11 2462 MHz 130 Mbit/s 65 ▂▄▆_ WPA2 no
NETGEAR51 <MAC 'NETGEAR51' [AC2]> Infra 1 2412 MHz 195 Mbit/s 57 ▂▄▆_ WPA2 no
HOME-F561-2.4 <MAC 'HOME-F561-2.4' [AC6]> Infra 6 2437 MHz 195 Mbit/s 57 ▂▄▆_ WPA1 WPA2 no
SalonSanJoy-Guest <MAC 'SalonSanJoy-Guest' [AC3]> Infra 1 2412 MHz 195 Mbit/s 49 ▂▄__ WPA1 WPA2 no
2020WWRoam <MAC '2020WWRoam' [AN9]> Infra 6 2437 MHz 54 Mbit/s 49 ▂▄__ -- no
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager config #############
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/03ca82]] (600 root)
[connection] id=03ca82 | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=03ca82
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/iPhone]] (600 root)
[connection] id=iPhone | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=iPhone
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/FlixBus]] (600 root)
[connection] id=FlixBus | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=FlixBus
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/_SNCF_WIFI_INTERCITES]] (600 root)
[connection] id=_SNCF_WIFI_INTERCITES | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=_SNCF_WIFI_INTERCITES
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/lag-public]] (600 root)
[connection] id=lag-public | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=lag-public
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Bbox-CC339556]] (600 root)
[connection] id=Bbox-CC339556 | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=Bbox-CC339556
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/wifi Ouibus]] (600 root)
[connection] id=wifi Ouibus | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=wifi Ouibus
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Caramba]] (600 root)
[connection] id=Caramba | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=Caramba
[ipv4] method=auto
[ipv6] method=ignore
[[/etc/NetworkManager/system-connections/46EE6E]] (600 root)
[connection] id=46EE6E | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=46EE6E
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ifyouregonnaaskitsthisone]] (600 root)
[connection] id=ifyouregonnaaskitsthisone | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=ifyouregonnaaskitsthisone
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/freebox_ADF3D3]] (600 root)
[connection] id=freebox_ADF3D3 | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=freebox_ADF3D3
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/SFR-9158]] (600 root)
[connection] id=SFR-9158 | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=SFR-9158
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Teaspressa Guest]] (600 root)
[connection] id=Teaspressa Guest | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=Teaspressa Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ERC COLD BREW ROCKS Secure]] (600 root)
[connection] id=ERC COLD BREW ROCKS Secure | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=ERC COLD BREW ROCKS Secure
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/DESKTOP-8FS5E46 1834]] (600 root)
[connection] id=DESKTOP-8FS5E46 1834 | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=DESKTOP-8FS5E46 1834
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ERC COLD BREW ROCKS ]] (600 root)
[connection] id=ERC COLD BREW ROCKS | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=ERC COLD BREW ROCKS
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/teabiz]] (600 root)
[connection] id=teabiz | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=teabiz
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Sweetwaters Downtown]] (600 root)
[connection] id=Sweetwaters Downtown | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=Sweetwaters Downtown
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Livebox-A88C]] (600 root)
[connection] id=Livebox-A88C | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=Livebox-A88C
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/PANERA]] (600 root)
[connection] id=PANERA | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=PANERA
[ipv4] method=auto
[ipv6] method=auto
##### Netplan config ####################
[/etc/netplan/01-network-manager-all.yaml]
network:
version: 2
renderer: NetworkManager
##### iw reg get ########################
Region: America/New_York (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
wlx<IF from MAC [IF1]> 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Current Frequency:2.437 GHz (Channel 6)
##### iwlist scan #######################
lo Interface doesn't support scanning.
Channel occupancy:
3 APs on Frequency:2.412 GHz (Channel 1)
3 APs on Frequency:2.437 GHz (Channel 6)
2 APs on Frequency:2.462 GHz (Channel 11)
wlx<IF from MAC [IF1]> Scan completed :
Cell 01 - Address: <MAC 'missroger' [AC1]>
ESSID:"missroger"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:144 Mb/s
Extra:wpa_ie=dd1c0050f20101000050f20202000050f2040050f20201000050f2020c00
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:rsn_ie=30180100000fac020200000fac04000fac020100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Quality=100/100 Signal level=68/100
Extra:fm=0003
Cell 02 - Address: <MAC 'NETGEAR51' [AC2]>
ESSID:"NETGEAR51"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=48/100 Signal level=55/100
Extra:fm=0001
Cell 03 - Address: <MAC 'SalonSanJoy-Guest' [AC3]>
ESSID:"SalonSanJoy-Guest"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:144 Mb/s
Extra:wpa_ie=dd1a0050f20101000050f20202000050f2040050f20201000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:rsn_ie=30180100000fac020200000fac04000fac020100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Quality=55/100 Signal level=47/100
Extra:fm=0001
Cell 04 - Address: <MAC 'CO2' [AC4]>
ESSID:"CO2"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=66/100 Signal level=94/100
Extra:fm=0003
Cell 05 - Address: <MAC 'Caramba' [AC5]>
ESSID:"Caramba"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=72/100 Signal level=100/100
Extra:fm=0003
Cell 06 - Address: <MAC 'HOME-F561-2.4' [AC6]>
ESSID:"HOME-F561-2.4"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:144 Mb/s
Extra:wpa_ie=dd1a0050f20101000050f20202000050f2040050f20201000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:rsn_ie=30180100000fac020200000fac04000fac020100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Quality=52/100 Signal level=57/100
Extra:fm=0003
Cell 07 - Address: <MAC 'ATT4Keu9s2' [AC7]>
ESSID:"ATT4Keu9s2"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=48/100 Signal level=69/100
Extra:fm=0003
Cell 08 - Address: <MAC 'NETGEAR21' [AC8]>
ESSID:"NETGEAR21"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:300 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=58/100 Signal level=70/100
Extra:fm=0003
##### module infos ######################
[cfg80211]
filename: /lib/modules/4.15.0-47-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: 62FD05DCC5AEEA290640C3D
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 4.15.0-47-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
blacklist rtl8xxxu
blacklist RTL871X
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 9.859123] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF1]>: link is not ready (repeated 3 times)
[ 123.618546] RTL871X: rtw_set_802_11_connect(wlx<IF from MAC [IF1]>) fw_state=0x00000008 (repeated 4 times)
[ 148.414242] IPv6: ADDRCONF(NETDEV_UP): wlx<IF from MAC [IF1]>: link is not ready
########## wireless info END ############On peut notamment voir ces lignes concernant le réseau "Caramba" auquel je tente de me connecter sans succès :
[[/etc/NetworkManager/system-connections/Caramba]] (600 root)
[connection] id=Caramba | type=wifi | permissions=
[wifi] mac-address=<MAC 'wlx<IF from MAC [IF1]>' [IF1]> | mac-address-blacklist= | ssid=Caramba
[ipv4] method=auto
[ipv6] method=ignoreOn dirait qu'il y a un problème avec l'IPV6. Je vais continuer sur cette voie + les issues de lwfinger.
Enfin une question qui peut paraître idiote concernant modprobe et le driver (rtl)8723bu :
Je dois lancer cette commande pour avoir une réponse :
sudo modprobe rtl8723buAlors que sur la page de Larry Finger il est mentionné :
sudo modprobe 8723buCa ne pose pas de problème particulier n'est-ce pas ?
Merci d'avance
Hors ligne
#15 Le 01/05/2019, à 10:22
- xubu1957
Re : Wifi + Airport Express
Bonjour,
dutohubohu a écrit :
Enfin une question qui peut paraître idiote concernant modprobe et le driver (rtl)8723bu :
Je dois lancer cette commande pour avoir une réponse :
sudo modprobe rtl8723buAlors que sur la page de Larry Finger il est mentionné :
sudo modprobe 8723buCa ne pose pas de problème particulier n'est-ce pas ?
Merci d'avance
Dans le post #1 :
sudo lshw -C network
*-network
description: Wireless interface
logical name: wlx88835d6adea6
configuration: broadcast=yes driver=rtl8723bu multicast=yes wireless=unassociatedIl ressort driver=rtl8723bu
_ _ _
Montre :
modinfo rtl8723bulsmod | grep rtldmesg | grep rtlConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#16 Le 01/05/2019, à 16:19
- dutohubohu
Re : Wifi + Airport Express
Bonjour,
modinfo rtl8723bu
filename: /lib/modules/4.15.0-47-generic/updates/dkms/rtl8723bu.ko
version: v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
author: Realtek Semiconductor Corp.
description: Realtek Wireless Lan Driver
license: GPL
srcversion: AF4160402707AF59600E87B
alias: usb:v7392pA611d*dc*dsc*dp*icFFiscFFipFFin*
alias: usb:v0BDApB720d*dc*dsc*dp*icFFiscFFipFFin*
depends: cfg80211
retpoline: Y
name: 8723bu
vermagic: 4.15.0-47-generic SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: rtw_ips_mode:The default IPS mode (int)
parm: rtw_usb_rxagg_mode:int
parm: rtw_btcoex_enable:Enable BT co-existence mechanism (int)
parm: rtw_ant_num:Antenna number setting (int)
parm: rtw_qos_opt_enable:int
parm: ifname:The default name to allocate for first interface (charp)
parm: if2name:The default name to allocate for second interface (charp)
parm: rtw_initmac:charp
parm: rtw_channel_plan:int
parm: rtw_special_rf_path:int
parm: rtw_chip_version:int
parm: rtw_rfintfs:int
parm: rtw_lbkmode:int
parm: rtw_network_mode:int
parm: rtw_channel:int
parm: rtw_mp_mode:int
parm: rtw_wmm_enable:int
parm: rtw_vrtl_carrier_sense:int
parm: rtw_vcs_type:int
parm: rtw_busy_thresh:int
parm: rtw_ht_enable:int
parm: rtw_bw_mode:int
parm: rtw_ampdu_enable:int
parm: rtw_rx_stbc:int
parm: rtw_ampdu_amsdu:int
parm: rtw_lowrate_two_xmit:int
parm: rtw_rf_config:int
parm: rtw_power_mgnt:int
parm: rtw_smart_ps:int
parm: rtw_low_power:int
parm: rtw_wifi_spec:int
parm: rtw_antdiv_cfg:int
parm: rtw_antdiv_type:int
parm: rtw_enusbss:int
parm: rtw_hwpdn_mode:int
parm: rtw_hwpwrp_detect:int
parm: rtw_hw_wps_pbc:int
parm: rtw_max_roaming_times:The max roaming times to try (uint)
parm: rtw_mc2u_disable:int
parm: rtw_80211d:Enable 802.11d mechanism (int)
parm: rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint)
parm: rtw_hiq_filter:0:allow all, 1:allow special, 2:deny all (uint)
parm: rtw_adaptivity_en:0:disable, 1:enable, 2:auto (uint)
parm: rtw_adaptivity_mode:0:normal, 1:carrier sense (uint)
parm: rtw_tx_pwr_lmt_enable:0:Disable, 1:Enable, 2: Depend on efuse (int)
parm: rtw_tx_pwr_by_rate:0:Disable, 1:Enable, 2: Depend on efuse (int)
parm: rtw_phy_file_path:The path of phy parameter (charp)
parm: rtw_load_phy_file:PHY File Bit Map (int)
parm: rtw_decrypt_phy_file:Enable Decrypt PHY File (int)dmesg | grep rtl
[ 5.860867] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 5.860873] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 5.862171] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 5.862179] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 6.031039] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
[ 6.031040] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
[ 6.122689] usbcore: registered new interface driver rtl8723bu
[ 6.651733] rtl8723bu 1-7:1.2 wlx88835d6adea6: renamed from wlan0lsmod | grep rtl
btrtl 16384 1 btusb
bluetooth 548864 33 btrtl,btintel,btbcm,bnep,btusb,rfcommJe donne également :
lsmod | grep 8723bu
8723bu 876544 0
cfg80211 622592 1 8723buDernière modification par dutohubohu (Le 01/05/2019, à 16:22)
Hors ligne
#17 Le 01/05/2019, à 16:24
- xubu1957
Re : Wifi + Airport Express
[ 6.031040] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40Le Bluetooth fonctionne t-il ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#18 Le 01/05/2019, à 16:33
- dutohubohu
Re : Wifi + Airport Express
Oui le Bluetooth fonctionne.
Hors ligne
#19 Le 01/05/2019, à 16:45
- xubu1957
Re : Wifi + Airport Express
Comme j'ai vu RTL871X que Toobuntu avait blacklisté.
Je n'ai pas d'autre piste de recherche.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#20 Le 01/05/2019, à 19:44
- dutohubohu
Re : Wifi + Airport Express
Ok merci encore de t'être penché sur ce problème.
Hors ligne
#21 Le 02/05/2019, à 08:08
- xubu1957
Re : Wifi + Airport Express
Bonjour,
Et si tu soumettais ton problème à Larry Finger ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#22 Le 08/05/2019, à 06:18
- dutohubohu
Re : Wifi + Airport Express
xubu1957 a écrit :
Bonjour,
Et si tu soumettais ton problème à Larry Finger ?
Bonjour,
Oui c'est ce que je vais finir par faire très certainement. Je cherche un peu partout, sur les forums anglophones, je me suis penché sur les logs, wpa_cli et wpa_supplicant mais je dois avouer que ça dépasse mes compétences.
Bonne journée
Hors ligne
#23 Le 08/05/2019, à 07:56
- moko138
Re : Wifi + Airport Express
En #16 :
dmesg [ 6.031039] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40lsmod | grep 8723bu 8723bu 876544 0 cfg80211 622592 1 8723bu
Donc il y a bien deux modules distincts, 8723bu et rtl8723bu.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#24 Le 08/05/2019, à 08:10
- xubu1957
Re : Wifi + Airport Express
@moko138
Salut,
Dans > github.com/lwfinger/rtl8723bu
git clone https://github.com/lwfinger/rtl8723bu.git -b v4.3.16Installation du rtl8723bu
make
sudo make install
sudo modprobe -v 8723buA quoi sert la commande sudo modprobe -v 8723bu ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#25 Le 08/05/2019, à 08:17
- moko138
Re : Wifi + Airport Express
man modprobe
-v --verbose
Print messages about what the program is doing. Usually mod‐
probe only prints messages if something goes wrong.
This option is passed through install or remove com‐
mands to other modprobe commands in the MODPROBE_OPTIONS
environment variable.%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne