#1 Le 10/04/2019, à 08:37
- gotcha5832
[Résolu] Vérifier / Réparer Grub
Bonjour à tous,
Lors d'une mise à jour automatique le système à mis à jour Grub, puis m'a dis que le disque du Grub n'était pas présent et me proposait de le réinstalle sur le disque de mon choix.
N'ayant qu'un case possible, je n'avais pas de choix.
La cochant celà échouait à chaque fois, et je n'avais d'autre choix que de continuer sans installer Grub.
Du coup j'ai l'immense crainte, qu'au prochain redemarrage, le système ne démarre pas.
Comment pourrais vérifier, réparer le Grub?
Merci
Dernière modification par gotcha5832 (Le 11/04/2019, à 12:21)
Hors ligne
#2 Le 10/04/2019, à 09:01
- malbo
Re : [Résolu] Vérifier / Réparer Grub
Bonjour,
Pour qu'on en sache davantage, je te prie de faire un Boot-Info. Si tu peux faire ce Boot-Info depuis une session de ton Ubuntu installé, c'est préférable. Sinon, tu peux le faire depuis une session live de Ubuntu 16.04 ou Ubuntu 18.04. Tu donneras l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#3 Le 10/04/2019, à 12:27
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
@malbo
Je t'en remercie
Et voici
Boot-info
Hors ligne
#4 Le 10/04/2019, à 13:19
- malbo
Re : [Résolu] Vérifier / Réparer Grub
Bonjour,
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 929,740,799 929,738,752 83 Linux
/dev/sda2 929,742,846 937,701,375 7,958,530 5 Extended
/dev/sda5 929,742,848 937,701,375 7,958,528 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/mapper/veracrypt1 C84C-E8AC vfat
/dev/mapper/veracrypt7 ef90359b-eda1-44ae-b448-bf4f08672795 ext4
/dev/sda1 96dc168d-731f-4ab2-85fc-c9d433a061f5 ext4
/dev/sda5 e5dc05f6-92c8-4cb4-b6b5-e63c7f61088e swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Apr 10 12:26 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 9 08:25 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 9 08:25 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 9 08:25 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 10 12:26 dm-name-veracrypt1 -> ../../dm-1
lrwxrwxrwx 1 root root 10 Apr 10 12:26 dm-name-veracrypt7 -> ../../dm-0
lrwxrwxrwx 1 root root 9 Apr 10 12:25 usb-Generic-_Multi-Card_20071114173400000-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 9 Apr 10 12:26 wwn-0x50014ee60731ea81 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 9 08:25 wwn-0x50014ee60731ea81-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 9 08:25 wwn-0x50014ee60731ea81-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 9 08:25 wwn-0x50014ee60731ea81-part5 -> ../../sda5
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
veracrypt1
veracrypt7
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/mapper/veracrypt1 /home/gotcha/.filezilla vfat (rw,uid=1000,gid=1000,umask=077)
/dev/mapper/veracrypt7 /media/veracrypt7 ext4 (rw)
/dev/sda1 / ext4 (rw,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=2
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=2
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
linux /boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-144-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
menuentry 'Ubuntu, avec Linux 4.4.0-144-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-144-generic-advanced-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-144-generic…'
linux /boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-144-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-144-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-144-generic-recovery-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-144-generic…'
linux /boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-144-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-143-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-143-generic-advanced-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-143-generic…'
linux /boot/vmlinuz-4.4.0-143-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-143-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-143-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-143-generic-recovery-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-143-generic…'
linux /boot/vmlinuz-4.4.0-143-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-143-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e5dc05f6-92c8-4cb4-b6b5-e63c7f61088e none swap sw 0 0
--------------------------------------------------------------------------------
====================== sda1/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
315.504348755 = 338.770214912 boot/grub/grub.cfg 1
438.863044739 = 471.225606144 boot/vmlinuz-4.4.0-143-generic 2
165.872066498 = 178.103775232 boot/vmlinuz-4.4.0-144-generic 2
165.872066498 = 178.103775232 vmlinuz 2
438.863044739 = 471.225606144 vmlinuz.old 2
441.898925781 = 474.485358592 boot/initrd.img-4.4.0-143-generic 2
184.929805756 = 198.566866944 boot/initrd.img-4.4.0-144-generic 4
184.929805756 = 198.566866944 initrd.img 4
441.898925781 = 474.485358592 initrd.img.old 2
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
288.130702972 = 309.377986560 boot/extlinux/extlinux.conf 1
179.168148041 = 192.380334080 boot/extlinux/chain.c32 1
============== sda1: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 07 7c 74 19 a0 41 8c be 15 b2 4a 21 0a aa d8 66 |.|t..A....J!...f|
00000010 c7 6f 71 fe 34 a7 68 24 95 93 3b 42 a7 cf 80 0e |.oq.4.h$..;B....|
00000020 7a 9f 5f ff 00 55 00 00 a9 62 cb bb 73 0c 31 7e |z._..U...b..s.1~|
00000030 79 f5 fa 53 cb e1 71 9d d9 1d 47 40 68 01 c0 36 |y..S..q...G@h..6|
00000040 e2 a2 44 53 c1 0a d9 f9 bd 87 bd 31 8e 72 33 80 |..DS.......1.r3.|
00000050 00 66 c1 39 1f fe ba 05 ad f6 24 c2 b1 56 09 2e |.f.9......$..V..|
00000060 dd 85 59 81 dc 41 ed e9 c5 0c 78 50 31 80 09 c6 |..Y..A....xP1...|
00000070 d0 0e 7e bd e8 18 a0 67 a1 cb 76 03 93 41 25 93 |..~....g..v..A%.|
00000080 60 2a c1 41 39 5c 82 3f 91 f4 a0 05 c0 45 8d 42 |`*.A9\.?.....E.B|
00000090 15 2a a0 95 27 24 9f 5e 69 4b 20 76 38 90 a9 1d |.*..'$.^iK v8...|
000000a0 f0 09 fc 39 c5 00 34 47 b8 48 c8 19 89 03 0d b8 |...9..4G.H......|
000000b0 90 0f 3d a8 3b 15 be 50 65 c2 03 f2 37 20 f7 1c |..=.;..Pe...7 ..|
000000c0 ff 00 9e 94 00 b9 ce 4f 7d bb 7a f3 4f 77 dc c5 |.......O}.z.Ow..|
000000d0 8a 80 42 00 02 e0 03 c6 3a 7a f7 e6 80 10 1c 1c |..B.....:z......|
000000e0 01 82 31 82 df 74 1f 7f 51 40 6c b6 e5 2a 5b 27 |..1..t..Q@l..*['|
000000f0 73 29 3b 49 fa 7e 74 07 98 31 6d ca 48 0c c3 a1 |s);I.~t..1m.H...|
00000100 da 31 4e 52 15 94 12 14 83 92 18 12 40 f5 3e a2 |.1NR........@.>.|
00000110 80 11 9a 2c 85 07 95 3b f2 70 18 7b 7d 3f cf 6a |...,...;.p.{}?.j|
00000120 92 56 56 de 0b 85 99 d4 13 18 42 a4 af ae 71 81 |.VV.......B...q.|
00000130 f5 a0 04 24 b1 21 96 44 00 1c 2b e0 f1 ff 00 d7 |...$.!.D..+.....|
00000140 a4 c1 1c a2 3a 05 c2 fc e7 3c d0 04 9b 15 58 48 |....:....<....XH|
00000150 e1 d8 91 b0 32 39 0a 7f 3e e3 34 d2 24 24 1c 23 |....29..>.4.$$.#|
00000160 2b 02 17 6e 01 07 b7 4e f4 00 d0 5c 0c 15 c6 78 |+..n...N...\...x|
00000170 24 81 c0 a7 31 6d b9 12 28 0a 40 db 83 9e 9f 96 |$...1m..(.@.....|
00000180 28 01 c3 6f 05 1b ef a1 39 1d fd 47 ff 00 ae 9e |(..o....9..G....|
00000190 e6 32 e0 41 13 aa 6c 50 62 2e 19 8b 7f 11 c8 03 |.2.A..lPb.......|
000001a0 82 7a 0e de f8 a0 04 56 61 81 1a f2 ff 00 20 de |.z.....Va..... .|
000001b0 a1 b2 7f cf a5 34 f7 62 1c b2 0f 90 46 71 00 cf |.....4.b....Fq..|
000001c0 bf 11 82 35 34 01 02 00 00 00 00 70 79 00 00 00 |...54......py...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
ADDITIONAL INFORMATION :
=================== log of boot-info 20190410_1225 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
(zenity:10169): Gtk-WARNING **: Theme parsing error: gtk.css:64:18: Not using units is deprecated. Assuming 'px'.
(zenity:10169): Gtk-WARNING **: Theme parsing error: gtk.css:64:20: Not using units is deprecated. Assuming 'px'.
Y a-t-il un RAID sur cet ordinateur ? no
Disk /dev/mapper/veracrypt7 doesn't contain a valid partition table
boot-info is executed in installed-session (Ubuntu 14.04.6 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash vt.handoff=7
Set sda as corresponding disk of mapper/veracrypt7
Set sda as corresponding disk of mapper/veracrypt1
Set sda as corresponding disk of mapper/veracrypt7
Set sda as corresponding disk of mapper/veracrypt1
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 14.04.6 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="96dc168d-731f-4ab2-85fc-c9d433a061f5" TYPE="ext4"
/dev/sda5: UUID="e5dc05f6-92c8-4cb4-b6b5-e63c7f61088e" TYPE="swap"
/dev/mapper/veracrypt7: UUID="ef90359b-eda1-44ae-b448-bf4f08672795" TYPE="ext4"
/dev/mapper/veracrypt1: UUID="C84C-E8AC" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 10 08:07 grub.d
total 76
-rwxr-xr-x 1 root root 9791 déc. 17 2015 00_header
-rwxr-xr-x 1 root root 6058 mai 13 2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin 26 2015 10_linux
-rwxr-xr-x 1 root root 10412 juin 26 2015 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 26 2015 30_os-prober
-rwxr-xr-x 1 root root 1418 août 2 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 2015 40_custom
-rwxr-xr-x 1 root root 216 juin 26 2015 41_custom
-rw-r--r-- 1 root root 483 juin 26 2015 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=2
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
mapper/veracrypt7 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /media/veracrypt7.
mapper/veracrypt1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home/gotcha/.filezilla.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA WDC WD5000LPLX-0;
1:1049kB:476GB:476GB:ext4::boot;
2:476GB:480GB:4075MB:::;
5:476GB:480GB:4075MB:linux-swap(v1)::;
BYT;
/dev/mapper/veracrypt1:262MB:dm:512:512:loop:Linux device-mapper (crypt);
1:0.00B:262MB:262MB:fat32::;
BYT;
/dev/mapper/veracrypt7:268MB:dm:512:512:loop:Linux device-mapper (crypt);
1:0.00B:268MB:268MB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 465,8G
sda1 part ext4 443,3G
sda2 part 1K
sda5 part swap 3,8G
loop0 loop 256M
dm-0 dm ext4 255,8M
loop1 loop 250M
dm-1 dm vfat 249,8M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
sda2 1 0 0
sda5 1 0 0 [SWAP]
loop0 1 0 0
dm-0 1 0 0 running /media/veracrypt7
loop1 1 0 0
dm-1 1 0 0 running /home/gotcha/.filezilla
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=gotcha)
veracrypt on /tmp/.veracrypt_aux_mnt1 type fuse.veracrypt (rw,nosuid,nodev,allow_other)
/dev/mapper/veracrypt7 on /media/veracrypt7 type ext4 (rw)
veracrypt on /tmp/.veracrypt_aux_mnt2 type fuse.veracrypt (rw,nosuid,nodev,allow_other)
/dev/mapper/veracrypt1 on /home/gotcha/.filezilla type vfat (rw,uid=1000,gid=1000,umask=077)
=================== ls:
/sys/block/dm-0 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-1 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dm-0 dm-1 dri drm_dp_aux0 ecryptfs fb0 fd freefall full fuse hidraw0 hidraw1 hidraw2 hpet hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom usb userio vboxdrv vboxdrvu vboxnetctl vboxusb vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control veracrypt1 veracrypt7
=================== hexdump -n512 -C /dev/mapper/veracrypt1
00000000 eb 3c 90 4d 53 44 4f 53 35 2e 30 00 02 02 24 00 |.<.MSDOS5.0...$.|
00000010 02 00 00 00 00 f8 00 00 01 00 01 00 00 00 00 00 |................|
00000020 00 ce 07 00 ce 07 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 01 29 ac e8 4c c8 4e 4f 20 4e 41 4d 45 20 20 |..)..L.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 00 00 00 00 00 00 | FAT32 ......|
00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Disk /dev/mapper/veracrypt7 doesn't contain a valid partition table
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 12K 3.8G 1% /dev
tmpfs tmpfs 778M 1.5M 777M 1% /run
/dev/sda1 ext4 437G 347G 68G 84% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.8G 316M 3.5G 9% /run/shm
none tmpfs 100M 108K 100M 1% /run/user
/dev/mapper/veracrypt7 ext4 244M 129M 99M 57% /media/veracrypt7
/dev/mapper/veracrypt1 vfat 248M 140K 248M 1% /home/gotcha/.filezilla
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000ed98c
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 929740799 464869376 83 Linux
/dev/sda2 929742846 937701375 3979265 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 929742848 937701375 3979264 82 Linux swap / Solaris
Disk /dev/mapper/veracrypt7: 268 MB, 268173312 bytes
255 heads, 63 sectors/track, 32 cylinders, total 523776 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/veracrypt1: 261 MB, 261881856 bytes
255 heads, 63 sectors/track, 31 cylinders, total 511488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Advice in case of suggested repair
Vous souhaiterez peut-être ré-essayer après avoir déchiffré vos partitions. (http://doc.ubuntu-fr.org/ecryptfs)
Voulez-vous continuer ?
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.6 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
On y voit la mention "veracrypt" et je constate que c'est un logiciel de chiffrement dans cette doc : https://doc.ubuntu-fr.org/veracrypt
Est-ce que tu utilises actuellement le chiffrement pour ton installation de Ubuntu ?
Hors ligne
#5 Le 10/04/2019, à 13:31
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
Effectivement j'ai un petit contener chiffré via veracrypt, mais toute l'installation n'est pas crypt
Je l'ai relancé sans:
http://paste.ubuntu.com/p/zvTShndtNy/
Hors ligne
#6 Le 10/04/2019, à 13:46
- malbo
Re : [Résolu] Vérifier / Réparer Grub
Ton dernier Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 929,740,799 929,738,752 83 Linux
/dev/sda2 929,742,846 937,701,375 7,958,530 5 Extended
/dev/sda5 929,742,848 937,701,375 7,958,528 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 96dc168d-731f-4ab2-85fc-c9d433a061f5 ext4
/dev/sda5 e5dc05f6-92c8-4cb4-b6b5-e63c7f61088e swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Apr 10 13:29 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 9 08:25 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 9 08:25 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 9 08:25 ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Apr 10 13:28 usb-Generic-_Multi-Card_20071114173400000-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 9 Apr 10 13:29 wwn-0x50014ee60731ea81 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 9 08:25 wwn-0x50014ee60731ea81-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 9 08:25 wwn-0x50014ee60731ea81-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 9 08:25 wwn-0x50014ee60731ea81-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=2
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=2
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
linux /boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-144-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
menuentry 'Ubuntu, avec Linux 4.4.0-144-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-144-generic-advanced-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-144-generic…'
linux /boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-144-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-144-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-144-generic-recovery-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-144-generic…'
linux /boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-144-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-143-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-143-generic-advanced-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-143-generic…'
linux /boot/vmlinuz-4.4.0-143-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-143-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-143-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-143-generic-recovery-96dc168d-731f-4ab2-85fc-c9d433a061f5' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
echo 'Chargement de Linux 4.4.0-143-generic…'
linux /boot/vmlinuz-4.4.0-143-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-143-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 96dc168d-731f-4ab2-85fc-c9d433a061f5
else
search --no-floppy --fs-uuid --set=root 96dc168d-731f-4ab2-85fc-c9d433a061f5
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e5dc05f6-92c8-4cb4-b6b5-e63c7f61088e none swap sw 0 0
--------------------------------------------------------------------------------
====================== sda1/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
315.504348755 = 338.770214912 boot/grub/grub.cfg 1
438.863044739 = 471.225606144 boot/vmlinuz-4.4.0-143-generic 2
165.872066498 = 178.103775232 boot/vmlinuz-4.4.0-144-generic 2
165.872066498 = 178.103775232 vmlinuz 2
438.863044739 = 471.225606144 vmlinuz.old 2
441.898925781 = 474.485358592 boot/initrd.img-4.4.0-143-generic 2
184.929805756 = 198.566866944 boot/initrd.img-4.4.0-144-generic 4
184.929805756 = 198.566866944 initrd.img 4
441.898925781 = 474.485358592 initrd.img.old 2
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
288.130702972 = 309.377986560 boot/extlinux/extlinux.conf 1
179.168148041 = 192.380334080 boot/extlinux/chain.c32 1
============== sda1: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 07 7c 74 19 a0 41 8c be 15 b2 4a 21 0a aa d8 66 |.|t..A....J!...f|
00000010 c7 6f 71 fe 34 a7 68 24 95 93 3b 42 a7 cf 80 0e |.oq.4.h$..;B....|
00000020 7a 9f 5f ff 00 55 00 00 a9 62 cb bb 73 0c 31 7e |z._..U...b..s.1~|
00000030 79 f5 fa 53 cb e1 71 9d d9 1d 47 40 68 01 c0 36 |y..S..q...G@h..6|
00000040 e2 a2 44 53 c1 0a d9 f9 bd 87 bd 31 8e 72 33 80 |..DS.......1.r3.|
00000050 00 66 c1 39 1f fe ba 05 ad f6 24 c2 b1 56 09 2e |.f.9......$..V..|
00000060 dd 85 59 81 dc 41 ed e9 c5 0c 78 50 31 80 09 c6 |..Y..A....xP1...|
00000070 d0 0e 7e bd e8 18 a0 67 a1 cb 76 03 93 41 25 93 |..~....g..v..A%.|
00000080 60 2a c1 41 39 5c 82 3f 91 f4 a0 05 c0 45 8d 42 |`*.A9\.?.....E.B|
00000090 15 2a a0 95 27 24 9f 5e 69 4b 20 76 38 90 a9 1d |.*..'$.^iK v8...|
000000a0 f0 09 fc 39 c5 00 34 47 b8 48 c8 19 89 03 0d b8 |...9..4G.H......|
000000b0 90 0f 3d a8 3b 15 be 50 65 c2 03 f2 37 20 f7 1c |..=.;..Pe...7 ..|
000000c0 ff 00 9e 94 00 b9 ce 4f 7d bb 7a f3 4f 77 dc c5 |.......O}.z.Ow..|
000000d0 8a 80 42 00 02 e0 03 c6 3a 7a f7 e6 80 10 1c 1c |..B.....:z......|
000000e0 01 82 31 82 df 74 1f 7f 51 40 6c b6 e5 2a 5b 27 |..1..t..Q@l..*['|
000000f0 73 29 3b 49 fa 7e 74 07 98 31 6d ca 48 0c c3 a1 |s);I.~t..1m.H...|
00000100 da 31 4e 52 15 94 12 14 83 92 18 12 40 f5 3e a2 |.1NR........@.>.|
00000110 80 11 9a 2c 85 07 95 3b f2 70 18 7b 7d 3f cf 6a |...,...;.p.{}?.j|
00000120 92 56 56 de 0b 85 99 d4 13 18 42 a4 af ae 71 81 |.VV.......B...q.|
00000130 f5 a0 04 24 b1 21 96 44 00 1c 2b e0 f1 ff 00 d7 |...$.!.D..+.....|
00000140 a4 c1 1c a2 3a 05 c2 fc e7 3c d0 04 9b 15 58 48 |....:....<....XH|
00000150 e1 d8 91 b0 32 39 0a 7f 3e e3 34 d2 24 24 1c 23 |....29..>.4.$$.#|
00000160 2b 02 17 6e 01 07 b7 4e f4 00 d0 5c 0c 15 c6 78 |+..n...N...\...x|
00000170 24 81 c0 a7 31 6d b9 12 28 0a 40 db 83 9e 9f 96 |$...1m..(.@.....|
00000180 28 01 c3 6f 05 1b ef a1 39 1d fd 47 ff 00 ae 9e |(..o....9..G....|
00000190 e6 32 e0 41 13 aa 6c 50 62 2e 19 8b 7f 11 c8 03 |.2.A..lPb.......|
000001a0 82 7a 0e de f8 a0 04 56 61 81 1a f2 ff 00 20 de |.z.....Va..... .|
000001b0 a1 b2 7f cf a5 34 f7 62 1c b2 0f 90 46 71 00 cf |.....4.b....Fq..|
000001c0 bf 11 82 35 34 01 02 00 00 00 00 70 79 00 00 00 |...54......py...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
ADDITIONAL INFORMATION :
=================== log of boot-info 20190410_1329 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 14.04.6 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-144-generic root=UUID=96dc168d-731f-4ab2-85fc-c9d433a061f5 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 14.04.6 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="96dc168d-731f-4ab2-85fc-c9d433a061f5" TYPE="ext4"
/dev/sda5: UUID="e5dc05f6-92c8-4cb4-b6b5-e63c7f61088e" TYPE="swap"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 10 08:07 grub.d
total 76
-rwxr-xr-x 1 root root 9791 déc. 17 2015 00_header
-rwxr-xr-x 1 root root 6058 mai 13 2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin 26 2015 10_linux
-rwxr-xr-x 1 root root 10412 juin 26 2015 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 26 2015 30_os-prober
-rwxr-xr-x 1 root root 1418 août 2 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 2015 40_custom
-rwxr-xr-x 1 root root 216 juin 26 2015 41_custom
-rw-r--r-- 1 root root 483 juin 26 2015 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=2
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA WDC WD5000LPLX-0;
1:1049kB:476GB:476GB:ext4::boot;
2:476GB:480GB:4075MB:::;
5:476GB:480GB:4075MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 465,8G
sda1 part ext4 443,3G
sda2 part 1K
sda5 part swap 3,8G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
sda2 1 0 0
sda5 1 0 0 [SWAP]
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=gotcha)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd freefall full fuse hidraw0 hidraw1 hidraw2 hpet hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom usb userio vboxdrv vboxdrvu vboxnetctl vboxusb vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 12K 3.8G 1% /dev
tmpfs tmpfs 778M 1.5M 777M 1% /run
/dev/sda1 ext4 437G 347G 68G 84% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.8G 244M 3.6G 7% /run/shm
none tmpfs 100M 108K 100M 1% /run/user
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000ed98c
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 929740799 464869376 83 Linux
/dev/sda2 929742846 937701375 3979265 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 929742848 937701375 3979264 82 Linux swap / Solaris
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.6 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Si j'avais regardé plus attentivement le Boot-Info que j'ai collé dans le post #4, j'aurais vu dans la partie "Mount points" les preuves que tu utilisais bien veracrypt.
A présent que ce point est éclairci, je te prie de passer la commande suivante depuis une session de ton Ubuntu :
sudo debconf-show grub-pc
Tu donneras le retour utilisable de cette commande dans ta réponse.
Hors ligne
#7 Le 10/04/2019, à 15:07
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
Le voici
gotcha@prbook:/boot/grub$ sudo debconf-show grub-pc
[sudo] password for gotcha:
grub2/linux_cmdline_default: quiet splash
grub-pc/mixed_legacy_and_grub2: true
grub2/update_nvram: true
* grub-pc/install_devices:
grub-pc/partition_description:
grub2/device_map_regenerated:
grub-pc/postrm_purge_boot_grub: false
grub2/kfreebsd_cmdline:
grub2/linux_cmdline:
* grub-pc/install_devices_disks_changed:
* grub-pc/install_devices_empty: true
grub-pc/hidden_timeout: false
grub-pc/chainload_from_menu.lst: true
grub2/kfreebsd_cmdline_default: quiet splash
grub-pc/install_devices_failed: false
grub-pc/kopt_extracted: false
grub-pc/timeout: 2
grub-pc/disk_description:
grub-pc/install_devices_failed_upgrade: true
Hors ligne
#8 Le 10/04/2019, à 15:12
- malbo
Re : [Résolu] Vérifier / Réparer Grub
Effectivement, il n'y a rien d'enregistré. Je te suggère de t'appuyer sur ce tuto pour réparer cette anomalie : https://forum.ubuntu-fr.org/viewtopic.php?id=440159
Tu vas commencer le tuto à l'étape "2) MISE A JOUR DE GRUB-PC"
Hors ligne
#9 Le 10/04/2019, à 16:11
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
Merci pour ton aide,
J'ai bien tenté de réparer le grub à partir de l'étape 2)
J'ai bien eu l'étape 1 et 2, puis la fenetre s'est fermé
gotcha@prbook:/boot/grub$ sudo dpkg-reconfigure grub-pc
[sudo] password for gotcha:
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.4.0-144-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-144-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-143-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-143-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
gotcha@prbook:/boot/grub$ sudo debconf-show grub-pc
grub2/update_nvram: true
* grub-pc/install_devices_empty: true
* grub-pc/install_devices:
grub-pc/disk_description:
grub-pc/kopt_extracted: false
grub2/device_map_regenerated:
grub-pc/install_devices_failed: false
grub-pc/postrm_purge_boot_grub: false
grub-pc/partition_description:
grub-pc/timeout: 2
* grub2/linux_cmdline_default: quiet splash
grub-pc/mixed_legacy_and_grub2: true
grub2/kfreebsd_cmdline_default: quiet splash
* grub-pc/install_devices_disks_changed:
grub-pc/install_devices_failed_upgrade: true
grub-pc/hidden_timeout: false
grub2/kfreebsd_cmdline:
* grub2/linux_cmdline:
grub-pc/chainload_from_menu.lst: true
Si je décrypte bien le debconf-show le problème est toujours là!?
Hors ligne
#10 Le 10/04/2019, à 16:35
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
Pour info, je suis en single boot, mono disk
Hors ligne
#11 Le 10/04/2019, à 17:07
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
Je suis passé par grub-install
gotcha@prbook:/boot/grub$ sudo os-prober
gotcha@prbook:/boot/grub$ sudo update-grub
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.4.0-144-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-144-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-143-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-143-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
gotcha@prbook:/boot/grub$ sudo grub-install /dev/sda
Installation pour la plate-forme i386-pc
Installation terminée, sans erreur.
gotcha@prbook:/boot/grub$ sudo debconf-show grub-pc
* grub-pc/install_devices:
grub-pc/install_devices_failed_upgrade: true
grub-pc/kopt_extracted: false
grub2/device_map_regenerated:
grub-pc/postrm_purge_boot_grub: false
grub-pc/disk_description:
grub2/update_nvram: true
grub-pc/mixed_legacy_and_grub2: true
grub-pc/chainload_from_menu.lst: true
grub-pc/timeout: 2
* grub-pc/install_devices_empty: true
* grub2/linux_cmdline_default: quiet splash
* grub-pc/install_devices_disks_changed:
grub-pc/hidden_timeout: false
grub-pc/partition_description:
grub2/kfreebsd_cmdline_default: quiet splash
grub-pc/install_devices_failed: false
grub2/kfreebsd_cmdline:
* grub2/linux_cmdline:
Mais la ligne * grub-pc/install_devices: reste définitivement vide
Dernière modification par gotcha5832 (Le 10/04/2019, à 17:15)
Hors ligne
#12 Le 10/04/2019, à 18:51
- malbo
Re : [Résolu] Vérifier / Réparer Grub
J'ai comparé par rapport à mon Ubuntu 14.04 et chez moi, j'ai :
grub-pc/install_devices_empty: false
(mais moi j'ai une ligne "grub-pc/install_devices:" qui n'est pas vide)
Alors que chez toi, c'est :
grub-pc/install_devices_empty: true
Les autres lignes sont les mêmes que les tiennes.
Je ne sais pas trop quoi te conseiller là. Il faudrait sans doute purger Grub et le réinstaller.
Dernière modification par malbo (Le 10/04/2019, à 18:54)
Hors ligne
#13 Le 10/04/2019, à 19:13
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
Je te remercie et je t'avoue que je suis un peu inquiet du prochain redemarrage.
Ce qui me suprend c'est que os-prober ne me remonte rien
D'un autre coté grub.cfg semble bien avoir les entrés
pour la purge tu parle de :
apt-get install --reinstall grub-pc grub-common
Hors ligne
#14 Le 10/04/2019, à 19:52
- malbo
Re : [Résolu] Vérifier / Réparer Grub
Je ne suis pas certain que cette commande unique soit suffisante. Moi j'aurais purgé avec la commande :
sudo apt-get purge grub-pc grub-common
Puis réinstallé Grub avec :
sudo apt-get install grub-pc
Hors ligne
#15 Le 10/04/2019, à 20:13
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
Je pense que c'est bon
/$ sudo debconf-show grub-pc
grub-pc/hidden_timeout: true
grub2/device_map_regenerated:
grub2/linux_cmdline_default: quiet splash
grub-pc/install_devices_empty: false
grub-pc/partition_description:
grub2/linux_cmdline:
grub-pc/mixed_legacy_and_grub2: true
grub-pc/postrm_purge_boot_grub: false
grub-pc/kopt_extracted: false
grub-pc/timeout: 10
grub-pc/chainload_from_menu.lst: true
grub-pc/install_devices_disks_changed:
grub-pc/install_devices_failed_upgrade: true
* grub-pc/install_devices: /dev/disk/by-id/ata-WDC_WD5000LPLX-00ZNTT0_WD-WXV1E364V8K5
grub-pc/disk_description:
grub2/update_nvram: true
grub-pc/install_devices_failed: false
grub2/kfreebsd_cmdline_default: quiet splash
grub2/kfreebsd_cmdline:
Hors ligne
#16 Le 10/04/2019, à 20:39
- malbo
Re : [Résolu] Vérifier / Réparer Grub
Bravo. C'est bien réparé.
Je te prie de passer la discussion en statut "résolu" en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :
[Résolu] Vérifier / Réparer Grub
Hors ligne
#17 Le 10/04/2019, à 20:51
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
J'y manquerais pas dès que j'aurai redemarré
Hors ligne
#18 Le 11/04/2019, à 13:45
- gotcha5832
Re : [Résolu] Vérifier / Réparer Grub
@malbo merci pour ton aide
Hors ligne