#226 Le 11/05/2019, à 16:26
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Il y a de tout dans les dongles bluetooth. En fait, le truc c'est de savoir quelle puce se trouve dedans, c'est ce qui détermine si c'est compatible ou pas. Mais le problème, c'est que ce n'est jamais indiqué sur les emballages. Donc ça reste assez aléatoire en allant dans ce genre de magasins. Mais ça peut se tenter
Et il faut une enceinte bluetooth aussi pour faire ressortir le son.
Hors ligne
#227 Le 12/05/2019, à 12:33
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Bon, ben j'ai acheté le dongle, il fonctionne, enfin il scanne les applications BT (casque et enceinte) et le son fonctionne sur le BT.
C'est une très bonne nouvelle déja.
Enfin il me semble.
Hors ligne
#228 Le 12/05/2019, à 12:34
- xubu1957
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Bonjour,
Montre :
lsusbpour voir l'adaptateur Bluetooth.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#229 Le 12/05/2019, à 15:29
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Voila la réponse :
ben@ben-Selecline-notebook-10-1:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0911:2188 Philips Speech Processing
Bus 001 Device 004: ID 058f:5608 Alcor Micro Corp.
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ben@ben-Selecline-notebook-10-1:~$ Hors ligne
#230 Le 12/05/2019, à 15:32
- xubu1957
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)Il est dans la Doc > bluetooth_materiel-soutenu
Merci.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#231 Le 12/05/2019, à 16:13
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Oui, j'ai regardé hier, avant de l'acheter. Mais il est vendu sous la marque Connectland, qui est aussi sur https://doc.ubuntu-fr.org/bluetooth_materiel-soutenu.
Sans faire de pub, au cas où ça peut intéresser quelqu'un, sachez que ce dongle est compatible :
https://www.electrodepot.fr/cle-bluetoo … -9789.html
Dernière modification par kalimeth (Le 12/05/2019, à 16:18)
Hors ligne
#232 Le 25/05/2019, à 12:34
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Hello,
Tu peux donner
aplay -let brancher des écouteurs, et tenter
speaker-testet dire si tu as du bruit, tu peux arrêter avec ctrl+c
Hors ligne
#233 Le 25/05/2019, à 12:48
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Bonjour Naziel.
ben@ben-Selecline-notebook-10-1:~$ aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: Audio [Intel HDMI/DP LPE Audio], périphérique 0: HdmiLpeAudio [Intel HDMI/DP LPE Audio]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: Audio [Intel HDMI/DP LPE Audio], périphérique 1: HdmiLpeAudio [Intel HDMI/DP LPE Audio]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
ben@ben-Selecline-notebook-10-1:~$ ben@ben-Selecline-notebook-10-1:~$ speaker-test
speaker-test 1.1.3
Le périphérique de lecture est default
Les paramètres du flux sont 48000Hz, S16_LE, 1 canaux
Utilisation de 16 octaves de 'pink noise'
La fréquence est 48000Hz (demandée 48000Hz)
L'intervalle de la taille du tampon est de 192 à 2097152
L'intervalle de la taille de la période est de 64 à 699051
Taille max. de tampon 2097152 utilisée
Périodes = 4
La durée de la période à été définie= 524288
La taille du tampon à été définie = 2097152
0 - Avant Gauche
Temps par période = 0,818717
0 - Avant Gauche
Temps par période = 0,948138
0 - Avant Gauche
Temps par période = 1,053827
0 - Avant Gauche
Temps par période = 1,051485
0 - Avant Gauche
Temps par période = 0,984335
0 - Avant Gauche
Temps par période = 1,060829
0 - Avant Gauche
Temps par période = 0,981941
0 - Avant Gauche
Temps par période = 1,008421
0 - Avant Gauche
Temps par période = 1,185075
0 - Avant Gauche
Temps par période = 1,036826
0 - Avant Gauche
Temps par période = 1,035472
0 - Avant Gauche
Temps par période = 1,039879
0 - Avant Gauche
^CTemps par période = 0,893603
ben@ben-Selecline-notebook-10-1:~$ Et malheureusement, je n'ai pas de son.
Hors ligne
#234 Le 25/05/2019, à 13:24
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Bizarre, que donne
cat /etc/modprobe.d/blacklist_hdmi.confDans le cas où le fichier n'existe pas,
echo "blacklist snd_hdmi_lpe_audio" | sudo tee /etc/modprobe.d/blacklist_hdmi.confpuis tu peux redémarrer et retenter le #232
Hors ligne
#235 Le 25/05/2019, à 13:44
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
En effet, le fichier de config n'existait pas, je l'ai créé.
Du coup :
ben@ben-Selecline-notebook-10-1:~$ aplay -l
aplay: device_list:270: aucune carte son n'a été trouvée...
ben@ben-Selecline-notebook-10-1:~$et
ben@ben-Selecline-notebook-10-1:~$ speaker-test
speaker-test 1.1.3
Le périphérique de lecture est default
Les paramètres du flux sont 48000Hz, S16_LE, 1 canaux
Utilisation de 16 octaves de 'pink noise'
La fréquence est 48000Hz (demandée 48000Hz)
L'intervalle de la taille du tampon est de 192 à 2097152
L'intervalle de la taille de la période est de 64 à 699051
Taille max. de tampon 2097152 utilisée
Périodes = 4
La durée de la période à été définie= 524288
La taille du tampon à été définie = 2097152
0 - Avant Gauche
Temps par période = 12,451131
0 - Avant Gauche
^CTemps par période = 12,444553
ben@ben-Selecline-notebook-10-1:~$ Et le son ne fonctionne toujours pas 
Hors ligne
#236 Le 25/05/2019, à 13:45
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Tu peux donner
dmesgHors ligne
#237 Le 25/05/2019, à 13:55
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
ben@ben-Selecline-notebook-10-1:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[ 0.000000] Linux version 4.15.0-50-generic (buildd@lcy01-amd64-013) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #54-Ubuntu SMP Mon May 6 18:46:08 UTC 2019 (Ubuntu 4.15.0-50.54-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=UUID=12296bba-7e5e-42ce-acf2-5b4c16f70eed ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000024a6cfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000024a6d000-0x0000000024afffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000024b00000-0x000000003b6e4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003b6e5000-0x000000003b744fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000003b745000-0x000000003b964fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b965000-0x000000003b965fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003b966000-0x000000003b966fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b967000-0x000000003b968fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003b969000-0x000000003b969fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b96a000-0x000000003c7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003cc00000-0x000000003cc1dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003cc1e000-0x000000003cc45fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003cc46000-0x000000003ccb5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ccb6000-0x000000003ccf5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ccf6000-0x000000003ccfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff60000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x3ccf5014 ESRT=0x3b754f10 SMBIOS=0x3b91c000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Auchan - SNCOIA Selecline notebook 10,1"/Selecline notebook 10,1", BIOS SNCOIA.54450053.AUO.09 11/21/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3cd00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFF60000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03E000000 mask FFE000000 uncachable
[ 0.000000] 3 base 03D000000 mask FFF000000 uncachable
[ 0.000000] 4 base 03CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 03CD00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] esrt: Reserving ESRT space from 0x000000003b754f10 to 0x000000003b754f48.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] BRK [0x30941000, 0x30941fff] PGTABLE
[ 0.000000] BRK [0x30942000, 0x30942fff] PGTABLE
[ 0.000000] BRK [0x30943000, 0x30943fff] PGTABLE
[ 0.000000] BRK [0x30944000, 0x30944fff] PGTABLE
[ 0.000000] BRK [0x30945000, 0x30945fff] PGTABLE
[ 0.000000] BRK [0x30946000, 0x30946fff] PGTABLE
[ 0.000000] BRK [0x30947000, 0x30947fff] PGTABLE
[ 0.000000] BRK [0x30948000, 0x30948fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x335c9000-0x35adbfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003CCF5014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000003CCCD188 0000DC (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000003CCEE000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000003CCD9000 00F64B (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000003CCF4000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: TCPA 0x000000003CCF3000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000003CCF2000 000055 (v03 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000003CCF1000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: OEM0 0x000000003CCF0000 000084 (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x000000003CCEF000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000003CCED000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000003CCEC000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000003CCEB000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000003CCEA000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x000000003CCE9000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD8000 000603 (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD5000 0024BD (v01 INSYDE DptfTab 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD4000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD3000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD2000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x000000003CCD1000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD0000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCCF000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCCE000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000003CCCC000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x000000003CCCB000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ccfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x3b6ba000-0x3b6e4fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003ccfffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000024a6cfff]
[ 0.000000] node 0: [mem 0x0000000024b00000-0x000000003b6e4fff]
[ 0.000000] node 0: [mem 0x000000003b965000-0x000000003b965fff]
[ 0.000000] node 0: [mem 0x000000003b967000-0x000000003b968fff]
[ 0.000000] node 0: [mem 0x000000003b96a000-0x000000003c7fffff]
[ 0.000000] node 0: [mem 0x000000003cc00000-0x000000003cc1dfff]
[ 0.000000] node 0: [mem 0x000000003ccf6000-0x000000003ccfffff]
[ 0.000000] Reserved but unavailable: 15697 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ccfffff]
[ 0.000000] On node 0 totalpages: 246447
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3828 pages used for memmap
[ 0.000000] DMA32 zone: 242451 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics memory at 0x000000003cf00000-0x000000003eefffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x24a6d000-0x24afffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b6e5000-0x3b744fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b745000-0x3b964fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b966000-0x3b966fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b969000-0x3b969fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3c800000-0x3cbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3cc1e000-0x3cc45fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3cc46000-0x3ccb5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3ccb6000-0x3ccf5fff]
[ 0.000000] e820: [mem 0x3ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 242533
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=UUID=12296bba-7e5e-42ce-acf2-5b4c16f70eed ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 866160K/985788K available (12300K kernel code, 2474K rwdata, 4276K rodata, 2412K init, 2416K bss, 119628K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39233 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 0
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] tsc: Detected 1332.800 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.001408] Security Framework initialized
[ 0.001414] Yama: becoming mindful.
[ 0.001491] AppArmor: AppArmor initialized
[ 0.002018] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002317] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.002366] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002381] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002965] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002969] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002986] mce: CPU supports 6 MCE banks
[ 0.002999] CPU0: Thermal monitoring enabled (TM1)
[ 0.003005] process: using mwait in idle threads
[ 0.003013] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.003016] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.003022] Spectre V2 : Mitigation: Full generic retpoline
[ 0.003024] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.003026] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.003044] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.003104] MDS: Mitigation: Clear CPU buffers
[ 0.003461] Freeing SMP alternatives memory: 36K
[ 0.004000] TSC deadline timer enabled
[ 0.004000] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735G @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[ 0.004000] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.004000] ... version: 3
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic registers: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 0000007fffffffff
[ 0.004000] ... fixed-purpose events: 3
[ 0.004000] ... event mask: 0000000700000003
[ 0.004000] Hierarchical SRCU implementation.
[ 0.004000] smp: Bringing up secondary CPUs ...
[ 0.004000] x86: Booting SMP configuration:
[ 0.004000] .... node #0, CPUs: #1
[ 0.005052] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.005579] #2 #3
[ 0.008554] smp: Brought up 1 node, 4 CPUs
[ 0.008554] smpboot: Max logical packages: 1
[ 0.008554] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[ 0.009150] devtmpfs: initialized
[ 0.009150] x86/mm: Memory block size: 128MB
[ 0.009150] evm: security.selinux
[ 0.009150] evm: security.SMACK64
[ 0.009150] evm: security.SMACK64EXEC
[ 0.009150] evm: security.SMACK64TRANSMUTE
[ 0.009150] evm: security.SMACK64MMAP
[ 0.009150] evm: security.apparmor
[ 0.009150] evm: security.ima
[ 0.009150] evm: security.capability
[ 0.009150] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.009150] PM: Registering ACPI NVS region [mem 0x3cc46000-0x3ccb5fff] (458752 bytes)
[ 0.009150] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.009150] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.009150] pinctrl core: initialized pinctrl subsystem
[ 0.009150] RTC time: 11:39:25, date: 05/25/19
[ 0.012199] NET: Registered protocol family 16
[ 0.012363] audit: initializing netlink subsys (disabled)
[ 0.012383] audit: type=2000 audit(1558784365.012:1): state=initialized audit_enabled=0 res=1
[ 0.012412] cpuidle: using governor ladder
[ 0.012412] cpuidle: using governor menu
[ 0.012412] ACPI: bus type PCI registered
[ 0.012412] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.012412] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.012412] PCI: not using MMCONFIG
[ 0.012412] PCI: Using configuration type 1 for base access
[ 0.017920] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.017920] ACPI: Added _OSI(Module Device)
[ 0.017920] ACPI: Added _OSI(Processor Device)
[ 0.017920] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.017920] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.017920] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.017920] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.017920] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.064296] ACPI: Dynamic OEM Table Load:
[ 0.064323] ACPI: SSDT 0xFFFF8C4A3C1BF000 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.065614] ACPI: Dynamic OEM Table Load:
[ 0.065635] ACPI: SSDT 0xFFFF8C4A3C1B9800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.068267] ACPI: Dynamic OEM Table Load:
[ 0.068287] ACPI: SSDT 0xFFFF8C4A3C29AC00 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.069395] ACPI: Dynamic OEM Table Load:
[ 0.069414] ACPI: SSDT 0xFFFF8C4A3C228000 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.076861] ACPI: Interpreter enabled
[ 0.076915] ACPI: (supports S0 S5)
[ 0.076919] ACPI: Using IOAPIC for interrupt routing
[ 0.077050] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.089159] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[ 0.089164] PCI: not using MMCONFIG
[ 0.089173] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.096837] ACPI: Power Resource [USBC] (on)
[ 0.098516] ACPI: Power Resource [WWPR] (off)
[ 0.112446] ACPI: Power Resource [PLPE] (on)
[ 0.126564] (null): Device [PWM1] is in always present list
[ 0.136155] ACPI: Power Resource [CLK0] (on)
[ 0.136328] ACPI: Power Resource [CLK1] (on)
[ 0.137601] ACPI: Power Resource [P28P] (off)
[ 0.137771] ACPI: Power Resource [P18P] (off)
[ 0.139174] ACPI: Power Resource [CLK0] (on)
[ 0.139340] ACPI: Power Resource [CLK1] (on)
[ 0.152308] ACPI: Power Resource [P28X] (off)
[ 0.152491] ACPI: Power Resource [P18X] (off)
[ 0.152681] ACPI: Power Resource [P28T] (off)
[ 0.152863] ACPI: Power Resource [P18T] (off)
[ 0.153048] ACPI: Power Resource [P1XT] (off)
[ 0.170397] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.170415] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.170662] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.170708] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.172030] PCI host bridge to bus 0000:00
[ 0.172038] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.172043] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.172048] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.172052] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.172056] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.172060] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.172064] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.172069] pci_bus 0000:00: root bus resource [mem 0x50c00000-0x50ffffff window]
[ 0.172073] pci_bus 0000:00: root bus resource [mem 0x3cf00001-0x3ef00000 window]
[ 0.172077] pci_bus 0000:00: root bus resource [mem 0x40000000-0x508ffffe window]
[ 0.172081] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[ 0.172086] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.172104] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.172350] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.172372] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x503fffff]
[ 0.172387] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[ 0.172401] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.172432] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.172663] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.172691] pci 0000:00:14.0: reg 0x10: [mem 0x50800000-0x5080ffff 64bit]
[ 0.172771] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.172974] pci 0000:00:15.0: [8086:0f28] type 00 class 0x040100
[ 0.173019] pci 0000:00:15.0: reg 0x10: [mem 0x50400000-0x505fffff]
[ 0.173040] pci 0000:00:15.0: reg 0x14: [mem 0x5082c000-0x5082cfff]
[ 0.173353] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.173383] pci 0000:00:1a.0: reg 0x10: [mem 0x50700000-0x507fffff]
[ 0.173397] pci 0000:00:1a.0: reg 0x14: [mem 0x50600000-0x506fffff]
[ 0.173498] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.173710] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.175657] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.176045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.176425] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.176804] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.177187] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.177572] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.177960] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.178356] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.181827] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.203393] SCSI subsystem initialized
[ 0.203440] libata version 3.00 loaded.
[ 0.203440] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.203440] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.203440] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.203440] vgaarb: loaded
[ 0.203440] ACPI: bus type USB registered
[ 0.203440] usbcore: registered new interface driver usbfs
[ 0.203440] usbcore: registered new interface driver hub
[ 0.203440] usbcore: registered new device driver usb
[ 0.373220] EDAC MC: Ver: 3.0.0
[ 0.373220] Registered efivars operations
[ 0.392107] PCI: Using ACPI for IRQ routing
[ 0.392113] PCI: pci_cache_line_size set to 64 bytes
[ 0.392147] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.392154] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.392157] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.392160] e820: reserve RAM buffer [mem 0x24a6d000-0x27ffffff]
[ 0.392163] e820: reserve RAM buffer [mem 0x3b6e5000-0x3bffffff]
[ 0.392166] e820: reserve RAM buffer [mem 0x3b966000-0x3bffffff]
[ 0.392169] e820: reserve RAM buffer [mem 0x3b969000-0x3bffffff]
[ 0.392172] e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff]
[ 0.392176] e820: reserve RAM buffer [mem 0x3cc1e000-0x3fffffff]
[ 0.392180] e820: reserve RAM buffer [mem 0x3cd00000-0x3fffffff]
[ 0.392476] NetLabel: Initializing
[ 0.392479] NetLabel: domain hash size = 128
[ 0.392480] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.392520] NetLabel: unlabeled traffic allowed by default
[ 0.393596] clocksource: Switched to clocksource refined-jiffies
[ 0.431946] VFS: Disk quotas dquot_6.6.0
[ 0.431992] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432313] AppArmor: AppArmor Filesystem Enabled
[ 0.432425] pnp: PnP ACPI init
[ 0.432608] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.432835] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.432841] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.432846] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.432851] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.432856] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.432872] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.433347] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.441348] pnp: PnP ACPI: found 3 devices
[ 0.444172] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.444178] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.444182] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.444187] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.444191] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.444196] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.444200] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.444205] pci_bus 0000:00: resource 11 [mem 0x50c00000-0x50ffffff window]
[ 0.444209] pci_bus 0000:00: resource 12 [mem 0x3cf00001-0x3ef00000 window]
[ 0.444213] pci_bus 0000:00: resource 13 [mem 0x40000000-0x508ffffe window]
[ 0.444218] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[ 0.444466] NET: Registered protocol family 2
[ 0.444995] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.445050] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.445111] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.445218] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.445237] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.448107] NET: Registered protocol family 1
[ 0.448146] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.448663] PCI: CLS 64 bytes, default 64
[ 0.448795] Unpacking initramfs...
[ 1.835361] Freeing initrd memory: 37964K
[ 1.835531] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[ 1.835574] clocksource: Switched to clocksource tsc
[ 1.835620] Scanning for low memory corruption every 60 seconds
[ 1.835620] Initialise system trusted keyrings
[ 1.835620] Key type blacklist registered
[ 1.835620] workingset: timestamp_bits=36 max_order=18 bucket_order=0
[ 1.838225] zbud: loaded
[ 1.839706] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.840257] fuse init (API version 7.26)
[ 1.844642] Key type asymmetric registered
[ 1.844646] Asymmetric key parser 'x509' registered
[ 1.844774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.844888] io scheduler noop registered
[ 1.844891] io scheduler deadline registered
[ 1.844978] io scheduler cfq registered (default)
[ 1.845575] efifb: probing for efifb
[ 1.845607] efifb: framebuffer at 0x40000000, using 2432k, total 2432k
[ 1.845610] efifb: mode is 1024x600x32, linelength=4096, pages=1
[ 1.845612] efifb: scrolling: redraw
[ 1.845616] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.845890] Console: switching to colour frame buffer device 128x37
[ 1.845930] fb0: EFI VGA frame buffer device
[ 1.845957] intel_idle: MWAIT substates: 0x33000020
[ 1.845961] intel_idle: v0.4.1 model 0x37
[ 1.846408] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.846473] ACPI: AC: found native INT33F4 PMIC, not loading
[ 1.846630] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.846682] ACPI: Lid Switch [LID]
[ 1.854520] [Firmware Bug]: No valid trip found
[ 1.855765] ACPI: Battery: found native INT33F4 PMIC, not loading
[ 1.855897] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.876172] 00:02: ttyS0 at I/O 0x3f8 (irq = 20, base_baud = 115200) is a 16550A
[ 1.917141] hpet: number irqs doesn't agree with number of timers
[ 1.917996] Linux agpgart interface v0.103
[ 1.971706] loop: module loaded
[ 1.972796] libphy: Fixed MDIO Bus: probed
[ 1.972799] tun: Universal TUN/TAP device driver, 1.6
[ 1.974305] PPP generic driver version 2.4.2
[ 1.975769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.975800] ehci-pci: EHCI PCI platform driver
[ 1.975883] ehci-platform: EHCI generic platform driver
[ 1.976053] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.976074] ohci-pci: OHCI PCI platform driver
[ 1.976140] ohci-platform: OHCI generic platform driver
[ 1.976209] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.977054] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.977071] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.978190] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.978198] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.978522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.978527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.978531] usb usb1: Product: xHCI Host Controller
[ 1.978535] usb usb1: Manufacturer: Linux 4.15.0-50-generic xhci-hcd
[ 1.978538] usb usb1: SerialNumber: 0000:00:14.0
[ 1.979444] hub 1-0:1.0: USB hub found
[ 1.979471] hub 1-0:1.0: 6 ports detected
[ 2.528503] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.528515] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.528525] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.528891] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.528896] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.528900] usb usb2: Product: xHCI Host Controller
[ 2.528904] usb usb2: Manufacturer: Linux 4.15.0-50-generic xhci-hcd
[ 2.528907] usb usb2: SerialNumber: 0000:00:14.0
[ 2.530480] hub 2-0:1.0: USB hub found
[ 2.530556] hub 2-0:1.0: 1 port detected
[ 2.531361] i8042: PNP: No PS/2 controller found.
[ 2.531860] mousedev: PS/2 mouse device common for all mice
[ 2.532511] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 2.532525] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[ 2.532547] i2c /dev entries driver
[ 2.533309] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 2.533580] device-mapper: uevent: version 1.0.3
[ 2.533790] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.533801] intel_pstate: Intel P-state driver initializing
[ 2.535758] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.535764] EFI Variables Facility v0.08 2004-May-17
[ 2.562440] NET: Registered protocol family 10
[ 2.580067] Segment Routing with IPv6
[ 2.580114] NET: Registered protocol family 17
[ 2.580753] Key type dns_resolver registered
[ 2.584395] RAS: Correctable Errors collector initialized.
[ 2.585206] microcode: sig=0x30678, pf=0x2, revision=0x838
[ 2.585993] microcode: Microcode Update Driver: v2.2.
[ 2.586016] sched_clock: Marking stable (2585979317, 0)->(2590317575, -4338258)
[ 2.588275] registered taskstats version 1
[ 2.588305] Loading compiled-in X.509 certificates
[ 2.597525] Loaded X.509 cert 'Build time autogenerated kernel key: 0d5cb4b7de8533fd8e7240d711ae9d354ea3dca1'
[ 2.597676] Couldn't get size: 0x800000000000000e
[ 2.597685] MODSIGN: Couldn't get UEFI db list
[ 2.597752] Couldn't get size: 0x800000000000000e
[ 2.597760] MODSIGN: Couldn't get UEFI MokListRT
[ 2.599487] zswap: loaded using pool lzo/zbud
[ 2.613930] Key type big_key registered
[ 2.613938] Key type trusted registered
[ 2.620021] Key type encrypted registered
[ 2.620026] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.626155] ima: Allocated hash algorithm: sha1
[ 2.686531] evm: HMAC attrs: 0x1
[ 2.712546] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[ 2.723824] Magic number: 3:172:682
[ 2.724505] rtc_cmos 00:00: setting system clock to 2019-05-25 11:39:27 UTC (1558784367)
[ 2.725584] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.725590] EDD information not available.
[ 2.749545] Freeing unused kernel image memory: 2412K
[ 2.764481] Write protecting the kernel read-only data: 20480k
[ 2.768778] Freeing unused kernel image memory: 2008K
[ 2.770945] Freeing unused kernel image memory: 1868K
[ 2.795298] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.795902] x86/mm: Checking user space page tables
[ 2.819010] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.868508] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 3.036541] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[ 3.036546] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.036549] usb 1-1: Product: CSR8510 A10
[ 3.137307] sdhci: Secure Digital Host Controller Interface driver
[ 3.137310] sdhci: Copyright(c) Pierre Ossman
[ 3.142145] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 3.164214] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.167823] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 3.194100] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[ 3.205378] mmc0: new high speed SDIO card at address 0001
[ 3.298189] mmc1: new HS200 MMC card at address 0001
[ 3.298793] mmcblk1: mmc1:0001 NCard 28.9 GiB
[ 3.299279] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
[ 3.299674] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
[ 3.299773] mmcblk1rpmb: mmc1:0001 NCard partition 3 4.00 MiB, chardev (244:0)
[ 3.308235] mmcblk1: p1 p2
[ 3.314103] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 3.314108] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.314112] usb 1-2: Product: USB2.0 Hub
[ 3.315509] hub 1-2:1.0: USB hub found
[ 3.315875] hub 1-2:1.0: 4 ports detected
[ 3.316586] usb: port power management may be unreliable
[ 3.340483] random: fast init done
[ 3.368871] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.368886] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.368929] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.512379] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.612044] usb 1-2.2: new high-speed USB device number 4 using xhci_hcd
[ 3.809761] usb 1-2.2: New USB device found, idVendor=058f, idProduct=5608
[ 3.809778] usb 1-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.809781] usb 1-2.2: Product: VGA Webcam
[ 3.809784] usb 1-2.2: Manufacturer: Alcor Micro, Corp.
[ 3.835775] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.878194] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.892481] usb 1-2.3: new low-speed USB device number 5 using xhci_hcd
[ 3.898146] systemd[1]: Detected architecture x86-64.
[ 3.906687] systemd[1]: Set hostname to <ben-Selecline-notebook-10-1>.
[ 4.000774] usb 1-2.3: New USB device found, idVendor=0911, idProduct=2188
[ 4.000780] usb 1-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.021590] systemd-gpt-auto-generator[243]: Failed to dissect: Input/output error
[ 4.025342] systemd[236]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 4.198352] systemd[1]: Created slice System Slice.
[ 4.198980] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.199370] systemd[1]: Listening on Journal Audit Socket.
[ 4.199576] systemd[1]: Listening on Syslog Socket.
[ 4.199850] systemd[1]: Listening on Journal Socket.
[ 4.202033] systemd[1]: Mounting Kernel Debug File System...
[ 4.265726] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[ 4.275241] lp: driver loaded but no devices found
[ 4.284888] ppdev: user-space parallel port driver
[ 4.451942] systemd-journald[271]: Received request to flush runtime journal from PID 1
[ 4.493612] Adding 1381704k swap on /swapfile. Priority:-2 extents:5 across:1414472k SSFS
[ 4.885313] 80860F0A:00: ttyS4 at MMIO 0x5091a000 (irq = 11, base_baud = 2764800) is a 16550A
[ 4.885557] serial serial0: tty port ttyS4 registered
[ 4.919336] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[ 4.932243] 80860F0A:01: ttyS5 at MMIO 0x5091c000 (irq = 12, base_baud = 2764800) is a 16550A
[ 4.992957] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.007672] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[ 5.024819] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.043816] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.044824] r8723bs: module verification failed: signature and/or required key missing - tainting kernel
[ 5.048616] RTL8723BS: module init start
[ 5.048621] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[ 5.048623] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[ 5.077951] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 5.116488] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 5.136795] pnetdev = (ptrval)
[ 5.190127] [drm] Memory usable by graphics device = 2048M
[ 5.190189] checking generic (40000000 260000) vs hw (40000000 10000000)
[ 5.190191] fb: switching to inteldrmfb from EFI VGA
[ 5.190547] Console: switching to colour dummy device 80x25
[ 5.192582] [drm] Replacing VGA console driver
[ 5.194537] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.194551] [drm] Driver supports precise vblank timestamp query.
[ 5.205102] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.213133] media: Linux media interface: v0.10
[ 5.230717] Linux video capture interface: v2.00
[ 5.232028] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.233772] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 5.246640] Bluetooth: Core ver 2.22
[ 5.246686] NET: Registered protocol family 31
[ 5.246689] Bluetooth: HCI device and connection manager initialized
[ 5.246699] Bluetooth: HCI socket layer initialized
[ 5.246704] Bluetooth: L2CAP socket layer initialized
[ 5.246719] Bluetooth: SCO socket layer initialized
[ 5.248935] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.250006] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 5.254228] [drm] HDaudio controller not detected, using LPE audio instead
[ 5.258196] RTL8723BS: rtw_ndev_init(wlan0)
[ 5.260458] RTL8723BS: module init ret =0
[ 5.272366] usbcore: registered new interface driver usbhid
[ 5.272369] usbhid: USB HID core driver
[ 5.338663] usbcore: registered new interface driver btusb
[ 5.428120] SSE version of gcm_enc/dec engaged.
[ 5.471564] uvcvideo: Found UVC 1.00 device VGA Webcam (058f:5608)
[ 5.479493] uvcvideo 1-2.2:1.0: Entity type for entity Extension 6 was not initialized!
[ 5.479500] uvcvideo 1-2.2:1.0: Entity type for entity Processing 5 was not initialized!
[ 5.479505] uvcvideo 1-2.2:1.0: Entity type for entity Selector 4 was not initialized!
[ 5.479508] uvcvideo 1-2.2:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.479715] input: VGA Webcam: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input2
[ 5.479912] usbcore: registered new interface driver uvcvideo
[ 5.479914] USB Video Class driver (1.1.1)
[ 5.579225] fbcon: inteldrmfb (fb0) is primary device
[ 5.579434] Console: switching to colour frame buffer device 128x37
[ 5.579476] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.748651] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.748782] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.748874] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 5.766787] intel_rapl: Found RAPL domain package
[ 5.766792] intel_rapl: Found RAPL domain core
[ 5.807592] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input3
[ 5.808352] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input4
[ 5.921408] audit: type=1400 audit(1558784370.691:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=444 comm="apparmor_parser"
[ 5.921419] audit: type=1400 audit(1558784370.691:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=444 comm="apparmor_parser"
[ 5.923786] audit: type=1400 audit(1558784370.691:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=448 comm="apparmor_parser"
[ 5.923801] audit: type=1400 audit(1558784370.691:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=448 comm="apparmor_parser"
[ 5.923808] audit: type=1400 audit(1558784370.691:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=448 comm="apparmor_parser"
[ 5.927930] audit: type=1400 audit(1558784370.695:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=445 comm="apparmor_parser"
[ 5.927941] audit: type=1400 audit(1558784370.695:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=445 comm="apparmor_parser"
[ 5.927948] audit: type=1400 audit(1558784370.695:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=445 comm="apparmor_parser"
[ 5.927954] audit: type=1400 audit(1558784370.695:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser"
[ 5.937447] audit: type=1400 audit(1558784370.707:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=462 comm="apparmor_parser"
[ 6.074020] input: HID 0911:2188 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0911:2188.0001/input/input6
[ 6.111585] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input5
[ 6.136941] hid-generic 0003:0911:2188.0001: input,hidraw0: USB HID v1.01 Keyboard [HID 0911:2188] on usb-0000:00:14.0-2.3/input0
[ 6.138475] input: HID 0911:2188 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0911:2188.0002/input/input7
[ 6.209817] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 16 -> VIRQ 41
[ 6.218753] hid-generic 0003:0911:2188.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [HID 0911:2188] on usb-0000:00:14.0-2.3/input1
[ 6.238414] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 17 -> VIRQ 42
[ 6.278484] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 18 -> VIRQ 43
[ 6.332426] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 19 -> VIRQ 44
[ 6.360846] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 24 -> VIRQ 49
[ 6.400248] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 25 -> VIRQ 50
[ 6.402623] axp288_fuel_gauge axp288_fuel_gauge: ADC charge current read failed:-19
[ 6.404354] axp288_fuel_gauge axp288_fuel_gauge: ADC charge current read failed:-19
[ 6.548125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.548128] Bluetooth: BNEP filters: protocol multicast
[ 6.548137] Bluetooth: BNEP socket layer initialized
[ 7.031488] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.040367] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[ 8.405785] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.537886] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.422023] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008
[ 11.349080] Bluetooth: RFCOMM TTY layer initialized
[ 11.349090] Bluetooth: RFCOMM socket layer initialized
[ 11.349107] Bluetooth: RFCOMM ver 1.11
[ 18.134125] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008
[ 18.168350] RTL8723BS: start auth
[ 18.170969] RTL8723BS: auth success, start assoc
[ 18.175068] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[ 18.175083] RTL8723BS: assoc success
[ 18.182979] RTL8723BS: send eapol packet
[ 18.192709] RTL8723BS: send eapol packet
[ 18.193023] RTL8723BS: set pairwise key camid:4, addr:5c:33:8e:c1:d4:a0, kid:0, type:AES
[ 18.193297] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 18.202999] RTL8723BS: set group key camid:5, addr:5c:33:8e:c1:d4:a0, kid:2, type:AES
[ 29.174696] random: crng init done
[ 29.174869] random: 7 urandom warning(s) missed due to ratelimiting
[ 485.384733] ACPI: button: The lid device is not compliant to SW_LID.
ben@ben-Selecline-notebook-10-1:~$ Hors ligne
#238 Le 25/05/2019, à 14:11
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Je ne trouve aucune sortie audio dans le dmesg ... A part
[ 5.254228] [drm] HDaudio controller not detected, using LPE audio insteadHors ligne
#239 Le 25/05/2019, à 14:45
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
J'ai vérifié, dans le BIOS, le son était réglé sur "LPE Audio PCI mode", du coup, je l'ai mis sur "LPE Audio ACPI mode", pour voir :
ben@ben-Selecline-notebook-10-1:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[ 0.000000] Linux version 4.15.0-50-generic (buildd@lcy01-amd64-013) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #54-Ubuntu SMP Mon May 6 18:46:08 UTC 2019 (Ubuntu 4.15.0-50.54-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=UUID=12296bba-7e5e-42ce-acf2-5b4c16f70eed ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000024a6cfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000024a6d000-0x0000000024afffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000024b00000-0x000000003b6e4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003b6e5000-0x000000003b744fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000003b745000-0x000000003b964fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b965000-0x000000003b965fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003b966000-0x000000003b966fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b967000-0x000000003b968fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003b969000-0x000000003b969fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b96a000-0x000000003c7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003cc00000-0x000000003cc1dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003cc1e000-0x000000003cc45fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003cc46000-0x000000003ccb5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ccb6000-0x000000003ccf5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ccf6000-0x000000003ccfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff60000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x3ccf5014 ESRT=0x3b754f10 SMBIOS=0x3b91c000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Auchan - SNCOIA Selecline notebook 10,1"/Selecline notebook 10,1", BIOS SNCOIA.54450053.AUO.09 11/21/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3cd00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFF60000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03E000000 mask FFE000000 uncachable
[ 0.000000] 3 base 03D000000 mask FFF000000 uncachable
[ 0.000000] 4 base 03CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 03CD00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] esrt: Reserving ESRT space from 0x000000003b754f10 to 0x000000003b754f48.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] BRK [0x31f41000, 0x31f41fff] PGTABLE
[ 0.000000] BRK [0x31f42000, 0x31f42fff] PGTABLE
[ 0.000000] BRK [0x31f43000, 0x31f43fff] PGTABLE
[ 0.000000] BRK [0x31f44000, 0x31f44fff] PGTABLE
[ 0.000000] BRK [0x31f45000, 0x31f45fff] PGTABLE
[ 0.000000] BRK [0x31f46000, 0x31f46fff] PGTABLE
[ 0.000000] BRK [0x31f47000, 0x31f47fff] PGTABLE
[ 0.000000] BRK [0x31f48000, 0x31f48fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x335c9000-0x35adbfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003CCF5014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000003CCCD188 0000DC (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000003CCEE000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000003CCD9000 00F64B (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000003CCF4000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: TCPA 0x000000003CCF3000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000003CCF2000 000055 (v03 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000003CCF1000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: OEM0 0x000000003CCF0000 000084 (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x000000003CCEF000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000003CCED000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000003CCEC000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000003CCEB000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000003CCEA000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x000000003CCE9000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD8000 000603 (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD5000 0024BD (v01 INSYDE DptfTab 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD4000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD3000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD2000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x000000003CCD1000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD0000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCCF000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCCE000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000003CCCC000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x000000003CCCB000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ccfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x3b6ba000-0x3b6e4fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003ccfffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000024a6cfff]
[ 0.000000] node 0: [mem 0x0000000024b00000-0x000000003b6e4fff]
[ 0.000000] node 0: [mem 0x000000003b965000-0x000000003b965fff]
[ 0.000000] node 0: [mem 0x000000003b967000-0x000000003b968fff]
[ 0.000000] node 0: [mem 0x000000003b96a000-0x000000003c7fffff]
[ 0.000000] node 0: [mem 0x000000003cc00000-0x000000003cc1dfff]
[ 0.000000] node 0: [mem 0x000000003ccf6000-0x000000003ccfffff]
[ 0.000000] Reserved but unavailable: 15697 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ccfffff]
[ 0.000000] On node 0 totalpages: 246447
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3828 pages used for memmap
[ 0.000000] DMA32 zone: 242451 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics memory at 0x000000003cf00000-0x000000003eefffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x24a6d000-0x24afffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b6e5000-0x3b744fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b745000-0x3b964fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b966000-0x3b966fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3b969000-0x3b969fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3c800000-0x3cbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3cc1e000-0x3cc45fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3cc46000-0x3ccb5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3ccb6000-0x3ccf5fff]
[ 0.000000] e820: [mem 0x3ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 242533
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=UUID=12296bba-7e5e-42ce-acf2-5b4c16f70eed ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 866160K/985788K available (12300K kernel code, 2474K rwdata, 4276K rodata, 2412K init, 2416K bss, 119628K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39233 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 0
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] tsc: Detected 1332.800 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.001535] Security Framework initialized
[ 0.001541] Yama: becoming mindful.
[ 0.001618] AppArmor: AppArmor initialized
[ 0.002144] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002451] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.002501] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002516] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.003100] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003104] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003121] mce: CPU supports 6 MCE banks
[ 0.003133] CPU0: Thermal monitoring enabled (TM1)
[ 0.003140] process: using mwait in idle threads
[ 0.003148] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.003151] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.003156] Spectre V2 : Mitigation: Full generic retpoline
[ 0.003158] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.003160] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.003178] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.003238] MDS: Mitigation: Clear CPU buffers
[ 0.003593] Freeing SMP alternatives memory: 36K
[ 0.004000] TSC deadline timer enabled
[ 0.004000] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735G @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[ 0.004000] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.004000] ... version: 3
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic registers: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 0000007fffffffff
[ 0.004000] ... fixed-purpose events: 3
[ 0.004000] ... event mask: 0000000700000003
[ 0.004000] Hierarchical SRCU implementation.
[ 0.004000] smp: Bringing up secondary CPUs ...
[ 0.004000] x86: Booting SMP configuration:
[ 0.004000] .... node #0, CPUs: #1
[ 0.005046] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.005571] #2 #3
[ 0.008553] smp: Brought up 1 node, 4 CPUs
[ 0.008553] smpboot: Max logical packages: 1
[ 0.008553] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[ 0.009148] devtmpfs: initialized
[ 0.009148] x86/mm: Memory block size: 128MB
[ 0.009148] evm: security.selinux
[ 0.009148] evm: security.SMACK64
[ 0.009148] evm: security.SMACK64EXEC
[ 0.009148] evm: security.SMACK64TRANSMUTE
[ 0.009148] evm: security.SMACK64MMAP
[ 0.009148] evm: security.apparmor
[ 0.009148] evm: security.ima
[ 0.009148] evm: security.capability
[ 0.009148] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.009148] PM: Registering ACPI NVS region [mem 0x3cc46000-0x3ccb5fff] (458752 bytes)
[ 0.009148] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.009148] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.009148] pinctrl core: initialized pinctrl subsystem
[ 0.009148] RTC time: 12:41:26, date: 05/25/19
[ 0.012209] NET: Registered protocol family 16
[ 0.012374] audit: initializing netlink subsys (disabled)
[ 0.012394] audit: type=2000 audit(1558788086.012:1): state=initialized audit_enabled=0 res=1
[ 0.012413] cpuidle: using governor ladder
[ 0.012413] cpuidle: using governor menu
[ 0.012413] ACPI: bus type PCI registered
[ 0.012413] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.012413] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.012413] PCI: not using MMCONFIG
[ 0.012413] PCI: Using configuration type 1 for base access
[ 0.017936] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.017936] ACPI: Added _OSI(Module Device)
[ 0.017936] ACPI: Added _OSI(Processor Device)
[ 0.017936] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.017936] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.017936] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.017936] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.017936] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.064320] ACPI: Dynamic OEM Table Load:
[ 0.064346] ACPI: SSDT 0xFFFF8C4ABC1BA800 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.065627] ACPI: Dynamic OEM Table Load:
[ 0.065648] ACPI: SSDT 0xFFFF8C4ABC1B9000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.068271] ACPI: Dynamic OEM Table Load:
[ 0.068291] ACPI: SSDT 0xFFFF8C4ABC29A200 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.069396] ACPI: Dynamic OEM Table Load:
[ 0.069414] ACPI: SSDT 0xFFFF8C4ABC228300 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.076865] ACPI: Interpreter enabled
[ 0.076916] ACPI: (supports S0 S5)
[ 0.076920] ACPI: Using IOAPIC for interrupt routing
[ 0.077049] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.089176] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[ 0.089181] PCI: not using MMCONFIG
[ 0.089191] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.096834] ACPI: Power Resource [USBC] (on)
[ 0.098516] ACPI: Power Resource [WWPR] (off)
[ 0.112457] ACPI: Power Resource [PLPE] (on)
[ 0.126729] (null): Device [PWM1] is in always present list
[ 0.136323] ACPI: Power Resource [CLK0] (on)
[ 0.136496] ACPI: Power Resource [CLK1] (on)
[ 0.137771] ACPI: Power Resource [P28P] (off)
[ 0.137942] ACPI: Power Resource [P18P] (off)
[ 0.139345] ACPI: Power Resource [CLK0] (on)
[ 0.139510] ACPI: Power Resource [CLK1] (on)
[ 0.152500] ACPI: Power Resource [P28X] (off)
[ 0.152682] ACPI: Power Resource [P18X] (off)
[ 0.152873] ACPI: Power Resource [P28T] (off)
[ 0.153052] ACPI: Power Resource [P18T] (off)
[ 0.153236] ACPI: Power Resource [P1XT] (off)
[ 0.170602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.170619] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.170866] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.170912] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.172232] PCI host bridge to bus 0000:00
[ 0.172239] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.172244] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.172249] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.172253] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.172258] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.172262] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.172266] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.172270] pci_bus 0000:00: root bus resource [mem 0x50c00000-0x50ffffff window]
[ 0.172274] pci_bus 0000:00: root bus resource [mem 0x3cf00001-0x3ef00000 window]
[ 0.172278] pci_bus 0000:00: root bus resource [mem 0x40000000-0x508ffffe window]
[ 0.172282] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[ 0.172287] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.172305] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.172551] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.172573] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x503fffff]
[ 0.172588] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[ 0.172602] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.172633] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.172864] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.172893] pci 0000:00:14.0: reg 0x10: [mem 0x50800000-0x5080ffff 64bit]
[ 0.172973] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.173178] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.173209] pci 0000:00:1a.0: reg 0x10: [mem 0x50700000-0x507fffff]
[ 0.173223] pci 0000:00:1a.0: reg 0x14: [mem 0x50600000-0x506fffff]
[ 0.173323] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.173527] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.175477] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.175858] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.176242] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.176619] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.177003] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.177388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.177777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.178173] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.184278] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.203913] SCSI subsystem initialized
[ 0.204059] libata version 3.00 loaded.
[ 0.204110] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.204110] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.204110] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.204110] vgaarb: loaded
[ 0.204110] ACPI: bus type USB registered
[ 0.204151] usbcore: registered new interface driver usbfs
[ 0.204182] usbcore: registered new interface driver hub
[ 0.204238] usbcore: registered new device driver usb
[ 0.377236] EDAC MC: Ver: 3.0.0
[ 0.377236] Registered efivars operations
[ 0.396108] PCI: Using ACPI for IRQ routing
[ 0.396114] PCI: pci_cache_line_size set to 64 bytes
[ 0.396141] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.396148] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.396152] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.396155] e820: reserve RAM buffer [mem 0x24a6d000-0x27ffffff]
[ 0.396158] e820: reserve RAM buffer [mem 0x3b6e5000-0x3bffffff]
[ 0.396161] e820: reserve RAM buffer [mem 0x3b966000-0x3bffffff]
[ 0.396164] e820: reserve RAM buffer [mem 0x3b969000-0x3bffffff]
[ 0.396167] e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff]
[ 0.396171] e820: reserve RAM buffer [mem 0x3cc1e000-0x3fffffff]
[ 0.396175] e820: reserve RAM buffer [mem 0x3cd00000-0x3fffffff]
[ 0.396470] NetLabel: Initializing
[ 0.396473] NetLabel: domain hash size = 128
[ 0.396474] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.396514] NetLabel: unlabeled traffic allowed by default
[ 0.400407] clocksource: Switched to clocksource refined-jiffies
[ 0.437369] VFS: Disk quotas dquot_6.6.0
[ 0.437417] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.437737] AppArmor: AppArmor Filesystem Enabled
[ 0.437851] pnp: PnP ACPI init
[ 0.438034] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.438257] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.438263] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.438268] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.438273] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.438278] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.438294] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.438765] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.446934] pnp: PnP ACPI: found 3 devices
[ 0.452170] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.452177] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.452182] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.452186] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.452190] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.452195] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.452199] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.452204] pci_bus 0000:00: resource 11 [mem 0x50c00000-0x50ffffff window]
[ 0.452208] pci_bus 0000:00: resource 12 [mem 0x3cf00001-0x3ef00000 window]
[ 0.452212] pci_bus 0000:00: resource 13 [mem 0x40000000-0x508ffffe window]
[ 0.452216] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[ 0.452471] NET: Registered protocol family 2
[ 0.452989] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.453044] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.453105] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.453212] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.453231] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.453353] NET: Registered protocol family 1
[ 0.453390] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.453905] PCI: CLS 64 bytes, default 64
[ 0.454038] Unpacking initramfs...
[ 1.842351] Freeing initrd memory: 37964K
[ 1.842380] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[ 1.842431] clocksource: Switched to clocksource tsc
[ 1.842431] Scanning for low memory corruption every 60 seconds
[ 1.842431] Initialise system trusted keyrings
[ 1.842431] Key type blacklist registered
[ 1.842431] workingset: timestamp_bits=36 max_order=18 bucket_order=0
[ 1.846130] zbud: loaded
[ 1.847601] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.848147] fuse init (API version 7.26)
[ 1.852548] Key type asymmetric registered
[ 1.852551] Asymmetric key parser 'x509' registered
[ 1.852674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.852784] io scheduler noop registered
[ 1.852787] io scheduler deadline registered
[ 1.852881] io scheduler cfq registered (default)
[ 1.853498] efifb: probing for efifb
[ 1.853531] efifb: framebuffer at 0x40000000, using 2432k, total 2432k
[ 1.853535] efifb: mode is 1024x600x32, linelength=4096, pages=1
[ 1.853536] efifb: scrolling: redraw
[ 1.853540] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.853823] Console: switching to colour frame buffer device 128x37
[ 1.853862] fb0: EFI VGA frame buffer device
[ 1.853891] intel_idle: MWAIT substates: 0x33000020
[ 1.853894] intel_idle: v0.4.1 model 0x37
[ 1.854340] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.854403] ACPI: AC: found native INT33F4 PMIC, not loading
[ 1.854559] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.854664] ACPI: Lid Switch [LID]
[ 1.862879] [Firmware Bug]: No valid trip found
[ 1.864781] ACPI: Battery: found native INT33F4 PMIC, not loading
[ 1.865399] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.885813] 00:02: ttyS0 at I/O 0x3f8 (irq = 26, base_baud = 115200) is a 16550A
[ 1.931300] hpet: number irqs doesn't agree with number of timers
[ 1.932189] Linux agpgart interface v0.103
[ 1.984939] loop: module loaded
[ 1.985552] libphy: Fixed MDIO Bus: probed
[ 1.985555] tun: Universal TUN/TAP device driver, 1.6
[ 1.987110] PPP generic driver version 2.4.2
[ 1.988952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.988983] ehci-pci: EHCI PCI platform driver
[ 1.989064] ehci-platform: EHCI generic platform driver
[ 1.989188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.989206] ohci-pci: OHCI PCI platform driver
[ 1.989285] ohci-platform: OHCI generic platform driver
[ 1.989356] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.990005] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.990028] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.991148] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.991156] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.991451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.991456] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.991460] usb usb1: Product: xHCI Host Controller
[ 1.991463] usb usb1: Manufacturer: Linux 4.15.0-50-generic xhci-hcd
[ 1.991467] usb usb1: SerialNumber: 0000:00:14.0
[ 1.993157] hub 1-0:1.0: USB hub found
[ 1.993224] hub 1-0:1.0: 6 ports detected
[ 2.529311] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.529342] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.529367] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.530160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.530165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.530169] usb usb2: Product: xHCI Host Controller
[ 2.530172] usb usb2: Manufacturer: Linux 4.15.0-50-generic xhci-hcd
[ 2.530176] usb usb2: SerialNumber: 0000:00:14.0
[ 2.532148] hub 2-0:1.0: USB hub found
[ 2.532211] hub 2-0:1.0: 1 port detected
[ 2.533518] i8042: PNP: No PS/2 controller found.
[ 2.535896] mousedev: PS/2 mouse device common for all mice
[ 2.539164] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 2.539180] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[ 2.539205] i2c /dev entries driver
[ 2.542602] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 2.543124] device-mapper: uevent: version 1.0.3
[ 2.543840] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.543852] intel_pstate: Intel P-state driver initializing
[ 2.546949] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.546955] EFI Variables Facility v0.08 2004-May-17
[ 2.578197] NET: Registered protocol family 10
[ 2.599782] Segment Routing with IPv6
[ 2.599913] NET: Registered protocol family 17
[ 2.601343] Key type dns_resolver registered
[ 2.604514] RAS: Correctable Errors collector initialized.
[ 2.604591] microcode: sig=0x30678, pf=0x2, revision=0x838
[ 2.606206] microcode: Microcode Update Driver: v2.2.
[ 2.606282] sched_clock: Marking stable (2606129785, 0)->(2609621657, -3491872)
[ 2.608817] registered taskstats version 1
[ 2.608837] Loading compiled-in X.509 certificates
[ 2.620155] Loaded X.509 cert 'Build time autogenerated kernel key: 0d5cb4b7de8533fd8e7240d711ae9d354ea3dca1'
[ 2.620541] Couldn't get size: 0x800000000000000e
[ 2.620550] MODSIGN: Couldn't get UEFI db list
[ 2.620620] Couldn't get size: 0x800000000000000e
[ 2.620628] MODSIGN: Couldn't get UEFI MokListRT
[ 2.622333] zswap: loaded using pool lzo/zbud
[ 2.639029] Key type big_key registered
[ 2.639055] Key type trusted registered
[ 2.647505] Key type encrypted registered
[ 2.647526] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.654383] ima: Allocated hash algorithm: sha1
[ 2.713356] evm: HMAC attrs: 0x1
[ 2.740105] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[ 2.752890] Magic number: 3:278:684
[ 2.752960] mem full: hash matches
[ 2.753529] rtc_cmos 00:00: setting system clock to 2019-05-25 12:41:29 UTC (1558788089)
[ 2.754620] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.754627] EDD information not available.
[ 2.779349] Freeing unused kernel image memory: 2412K
[ 2.792520] Write protecting the kernel read-only data: 20480k
[ 2.796839] Freeing unused kernel image memory: 2008K
[ 2.799271] Freeing unused kernel image memory: 1868K
[ 2.823467] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.824073] x86/mm: Checking user space page tables
[ 2.847146] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.868812] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 3.033679] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[ 3.033685] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.033688] usb 1-1: Product: CSR8510 A10
[ 3.160060] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.165477] sdhci: Secure Digital Host Controller Interface driver
[ 3.165479] sdhci: Copyright(c) Pierre Ossman
[ 3.172842] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 3.193264] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 3.215066] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[ 3.232452] mmc0: new high speed SDIO card at address 0001
[ 3.311598] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 3.311613] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.311623] usb 1-2: Product: USB2.0 Hub
[ 3.313587] hub 1-2:1.0: USB hub found
[ 3.313892] hub 1-2:1.0: 4 ports detected
[ 3.315107] usb: port power management may be unreliable
[ 3.323870] mmc1: new HS200 MMC card at address 0001
[ 3.324350] mmcblk1: mmc1:0001 NCard 28.9 GiB
[ 3.324665] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
[ 3.324972] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
[ 3.325227] mmcblk1rpmb: mmc1:0001 NCard partition 3 4.00 MiB, chardev (244:0)
[ 3.328193] mmcblk1: p1 p2
[ 3.358465] random: fast init done
[ 3.384246] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.384298] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.384651] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.529505] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.616147] usb 1-2.2: new high-speed USB device number 4 using xhci_hcd
[ 3.823653] usb 1-2.2: New USB device found, idVendor=058f, idProduct=5608
[ 3.823658] usb 1-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.823661] usb 1-2.2: Product: VGA Webcam
[ 3.823664] usb 1-2.2: Manufacturer: Alcor Micro, Corp.
[ 3.891622] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.915071] usb 1-2.3: new low-speed USB device number 5 using xhci_hcd
[ 3.939509] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.961785] systemd[1]: Detected architecture x86-64.
[ 3.970835] systemd[1]: Set hostname to <ben-Selecline-notebook-10-1>.
[ 4.020580] usb 1-2.3: New USB device found, idVendor=0911, idProduct=2188
[ 4.020586] usb 1-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.100497] systemd-gpt-auto-generator[236]: Failed to dissect: Input/output error
[ 4.103275] systemd[229]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 4.250778] systemd[1]: Reached target Remote File Systems.
[ 4.251557] systemd[1]: Created slice System Slice.
[ 4.251833] systemd[1]: Listening on udev Control Socket.
[ 4.252306] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.252868] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.253067] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.318380] lp: driver loaded but no devices found
[ 4.329990] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[ 4.351742] ppdev: user-space parallel port driver
[ 4.519157] systemd-journald[257]: Received request to flush runtime journal from PID 1
[ 4.536527] Adding 1381704k swap on /swapfile. Priority:-2 extents:5 across:1414472k SSFS
[ 4.864445] 80860F0A:00: ttyS4 at MMIO 0x5091b000 (irq = 17, base_baud = 2764800) is a 16550A
[ 4.864687] serial serial0: tty port ttyS4 registered
[ 4.911120] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[ 4.916351] 80860F0A:01: ttyS5 at MMIO 0x5091d000 (irq = 18, base_baud = 2764800) is a 16550A
[ 5.009957] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[ 5.024109] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.024650] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 5.036239] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.055123] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.056581] r8723bs: module verification failed: signature and/or required key missing - tainting kernel
[ 5.059952] RTL8723BS: module init start
[ 5.059956] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[ 5.059958] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[ 5.064718] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 5.142988] pnetdev = (ptrval)
[ 5.163196] intel_sst_acpi 80860F28:00: No matching machine driver found
[ 5.194873] Bluetooth: Core ver 2.22
[ 5.194919] NET: Registered protocol family 31
[ 5.194921] Bluetooth: HCI device and connection manager initialized
[ 5.194929] Bluetooth: HCI socket layer initialized
[ 5.194934] Bluetooth: L2CAP socket layer initialized
[ 5.194948] Bluetooth: SCO socket layer initialized
[ 5.212206] RTL8723BS: rtw_ndev_init(wlan0)
[ 5.213483] RTL8723BS: module init ret =0
[ 5.268522] usbcore: registered new interface driver btusb
[ 5.274784] media: Linux media interface: v0.10
[ 5.284550] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.291181] Linux video capture interface: v2.00
[ 5.304363] usbcore: registered new interface driver usbhid
[ 5.304367] usbhid: USB HID core driver
[ 5.368389] uvcvideo: Found UVC 1.00 device VGA Webcam (058f:5608)
[ 5.376381] [drm] Memory usable by graphics device = 2048M
[ 5.376388] checking generic (40000000 260000) vs hw (40000000 10000000)
[ 5.376390] fb: switching to inteldrmfb from EFI VGA
[ 5.376471] Console: switching to colour dummy device 80x25
[ 5.376715] [drm] Replacing VGA console driver
[ 5.376906] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.376908] [drm] Driver supports precise vblank timestamp query.
[ 5.378352] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.381019] uvcvideo 1-2.2:1.0: Entity type for entity Extension 6 was not initialized!
[ 5.381025] uvcvideo 1-2.2:1.0: Entity type for entity Processing 5 was not initialized!
[ 5.381029] uvcvideo 1-2.2:1.0: Entity type for entity Selector 4 was not initialized!
[ 5.381033] uvcvideo 1-2.2:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.381212] input: VGA Webcam: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1
[ 5.381402] usbcore: registered new interface driver uvcvideo
[ 5.381404] USB Video Class driver (1.1.1)
[ 5.405562] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 5.418676] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.422621] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 5.422940] [drm] HDaudio controller not detected, using LPE audio instead
[ 5.472913] SSE version of gcm_enc/dec engaged.
[ 5.741174] fbcon: inteldrmfb (fb0) is primary device
[ 5.741467] Console: switching to colour frame buffer device 128x37
[ 5.741521] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.759527] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.759662] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.759752] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 5.763755] intel_rapl: Found RAPL domain package
[ 5.763759] intel_rapl: Found RAPL domain core
[ 5.784627] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input3
[ 5.787060] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input4
[ 5.943491] input: HID 0911:2188 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0911:2188.0001/input/input5
[ 6.000484] hid-generic 0003:0911:2188.0001: input,hidraw0: USB HID v1.01 Keyboard [HID 0911:2188] on usb-0000:00:14.0-2.3/input0
[ 6.001145] input: HID 0911:2188 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0911:2188.0002/input/input7
[ 6.018556] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input6
[ 6.060602] hid-generic 0003:0911:2188.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [HID 0911:2188] on usb-0000:00:14.0-2.3/input1
[ 6.436410] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 16 -> VIRQ 47
[ 6.465465] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 17 -> VIRQ 48
[ 6.490305] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 18 -> VIRQ 49
[ 6.512181] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 19 -> VIRQ 50
[ 6.535395] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 24 -> VIRQ 55
[ 6.558900] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 25 -> VIRQ 56
[ 8.306220] audit: type=1400 audit(1558788095.047:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=513 comm="apparmor_parser"
[ 8.306233] audit: type=1400 audit(1558788095.047:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=513 comm="apparmor_parser"
[ 8.306241] audit: type=1400 audit(1558788095.047:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=513 comm="apparmor_parser"
[ 8.307449] audit: type=1400 audit(1558788095.047:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=510 comm="apparmor_parser"
[ 8.307461] audit: type=1400 audit(1558788095.047:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=510 comm="apparmor_parser"
[ 8.307468] audit: type=1400 audit(1558788095.047:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=510 comm="apparmor_parser"
[ 8.307474] audit: type=1400 audit(1558788095.047:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=510 comm="apparmor_parser"
[ 8.309355] audit: type=1400 audit(1558788095.051:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=509 comm="apparmor_parser"
[ 8.309367] audit: type=1400 audit(1558788095.051:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=509 comm="apparmor_parser"
[ 8.310902] audit: type=1400 audit(1558788095.051:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=514 comm="apparmor_parser"
[ 8.404415] random: crng init done
[ 8.404422] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.635024] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.635028] Bluetooth: BNEP filters: protocol multicast
[ 8.635038] Bluetooth: BNEP socket layer initialized
[ 9.046679] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.058036] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[ 10.449171] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.585354] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.655642] Bluetooth: RFCOMM TTY layer initialized
[ 11.655658] Bluetooth: RFCOMM socket layer initialized
[ 11.655670] Bluetooth: RFCOMM ver 1.11
[ 12.533787] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008
ben@ben-Selecline-notebook-10-1:~$ Vu que ça ne change pas grand chose, je l'ai remis sur " LPE Audio PCI mde".
Dernière modification par kalimeth (Le 25/05/2019, à 14:58)
Hors ligne
#240 Le 25/05/2019, à 15:06
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Je ne trouve rien non plus. Tu n'aurais pas par hasard les pilotes windows pour cette fameuse carte son?
Hors ligne
#241 Le 25/05/2019, à 19:50
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Alors, là, je ne sais pas trop comment les retrouver. Pour pouvoir installer ubuntu, j'ai été obligé d'écraser windows.
Il me propose encore un "recovery" sur grub mais ça ne donne rien quand je le sélectionne.
Hors ligne
#242 Le 25/05/2019, à 20:14
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Pas de cd avec le pc? Si non, tu peux tenter de contacter selecline pour avoir
1) une maj du bios (parce que ça peut être un bug dans le bios)
2) le pilote windows pour l'audio (on ne sait au final pas ce que c'est comme carte son)
Hors ligne
#243 Le 25/05/2019, à 21:23
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Je vais essayer de faire ça, mais honnêtement, j'y crois pas trop. Ils vont vouloir faire jouer le SAV, mais vu que j'ai viré leur windows ...
Sinon, non, pas de cd (de toute façon, y a pas de lecteur 
).
Hors ligne
#244 Le 25/05/2019, à 21:30
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Bah dis que tu as encore windows (avec le sav hp, j'avais pas dit que j'étais sur linux, j'ai improvisé et j'ai eu l'info que je cherchais )
Hors ligne
#245 Le 25/05/2019, à 21:40
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Oui, de toute façon, je e leur dirais pas que je suis sur linux.
Après, j'ai pas beaucoup d'espoir quand aux capacités du SAV informatique de Selecline (Auchan).
Hors ligne
#246 Le 25/05/2019, à 23:12
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
En gros, ce qu'il faudrait, c'est qu'ils puissent au moins t'indiquer la carte son du pc, parce qu'on est pas sûr que ce soit une rt5651
Hors ligne
#247 Le 25/05/2019, à 23:47
- kalimeth
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Et en ouvrant le PC, ça peut être écrit en toutes lettres quelque part à ton avis ?
Hors ligne
#248 Le 25/05/2019, à 23:57
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Honnêtement je sais pas, mais ça me paraît risqué de démonter cette bête là
Hors ligne
#249 Le 26/05/2019, à 07:00
- xubu1957
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Bonjour,
Au #3, il ressortait un chipset es8316.
Il y a un commentaire dans cette page > devops.norris.hu/2017/08/23/drivers-for-cheap-intel-based-intel-atom-z3735f-tablet-with-windows
Le 29/07/2018, zetgor 2000 a écrit :
I found that Selecline is the brand of a french discount-mall network, Auchan. Nobody can expect from a grocery store to support their devices, however a basic homepage and working links for the drivers is essential.
Thís driver was worked for me (more or less) on another Selecline model, namely the cw10q3 / 876890. I found audio issue, and then “multimedia controller” driver trouble. The audio driver was solved via installing the Atom Z3700 series platform driver, and also the es1386 (or similar, i do not remember the exact type) audio device.. The Multimedia controller, however was resolved via a chipset driver, and it works well via a “2nd gen. Core Memory controller”… Interesting, but the yellow exclamation mark was disappear in the device manager.
But i do not recommend this notebook… it is a crap. It is “new”, but for a laptop it is small, and you cannot use as a tablet because the built in keyboard, and the ports. It is slow (in 2018), my android phone runs fluently, and it is older. I know there is a difference between android and windows… So, this is a waste of electric parts, and the designer of this laptop could have a better job.
_ _ _
Un démontage > Problema downgrade a w7 desde w10 vía usb
et un commentaire :
Le 01/10/2016, MasaQre a écrit :
Indagando por internet..
La marca Selecline es francesa, se vende en los hipermercados "Auchan", (Alcampo en España)Más que un netbook, parece un hibrido entre Tablet/Netbook.
El procesador es un Intel Bay Trail CR (Intel Atom Z3700 series) según la web de Intel.Dudo mucho que le puedas poner Windows 7 en ese Tablet, por el procesador que lleva. Sería una versión Starter, Embedded o vete a saber, luego a ver si hay drivers.
He encontrado en YouTube la misma BIOS que pones tu, y es de una Tablet Chuwi (https://www.youtube.com/watch?v=FHKjiyj7dlc)
Efectivamente el usb bootable se hace con el programa RUFUS.Así que por ahí van los tiros..
Dernière modification par xubu1957 (Le 26/05/2019, à 07:18)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#250 Le 26/05/2019, à 09:30
- Nuliel
Re : Problème de son avec Lubuntu sur AUCHAN SELECLINE 10,1
Oui, mais ça c'est les enceintes il me semble. Mais il est peut être plus probable qu'on réussira à faire fonctionner les enceintes avant les écouteurs.
Je vais regarder ça
Hors ligne