#1 Le 15/02/2019, à 20:51
- bilounoir
[Résolu ]Erreurs au boot, parfois blocage de Grub en UEFI 18.04
Bonjour
Mon ordi de bureau core i3 2120- 4go de ram acheté le 17/03/2014
acheté sans os installé, a toujours tourné sur Linux en UEFI depuis son achat
j'ai utilisé Ubuntu ,Debian
a l'heure actuelle tourne seulement avec Xubuntu 18.04
""
depuis un moment il me fait des misères ,parfois , il se bloque au démarrage le Grub n'apparait pas
obliger d'employer la manière forte , (l'intérupteur ) cela arrive rarement
'''
puis au boot il me fait pas mal d’erreurs pour se stabiliser ensuite
""
comme j'ai quand même fait pas mal d'installations dessus ,je me demande si son HDD de 500 GO ne serait pas a remplacer ?
mais comme je suis très peu matériel je ne sais pas trop ?
Si vous avez des conseils a me donner ou des manips a faire
je vous remercies a l'avance
Dernière modification par bilounoir (Le 17/02/2019, à 13:27)
#2 Le 15/02/2019, à 22:32
- ylag
Re : [Résolu ]Erreurs au boot, parfois blocage de Grub en UEFI 18.04
Salut,
Serait peut-être bon que tu fournisses un rapport smart pour ce disque ?
Voir la doc de smartmontools à ce sujet.
Avant toute chose, assure-toi d'avoir une sauvegarde récente de tes données qui seraient sur ce disque.
A+
Dernière modification par ylag (Le 15/02/2019, à 22:33)
Hors ligne
#3 Le 15/02/2019, à 22:39
- bilounoir
Re : [Résolu ]Erreurs au boot, parfois blocage de Grub en UEFI 18.04
entendu je vois cela , je commence par étudier la doc
Merci pour la réponse
#4 Le 15/02/2019, à 23:21
- bilounoir
Re : [Résolu ]Erreurs au boot, parfois blocage de Grub en UEFI 18.04
vola
sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-45-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Offline Testing Enabled every four hours.
"""
sudo smartctl -H -i /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-45-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST500DM002-1BD142
Serial Number: Z3TPSJEY
LU WWN Device Id: 5 000c50 064932539
Firmware Version: KC45
User Capacity: 500107862016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 15 22:03:24 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
"""
sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-45-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST500DM002-1BD142
Serial Number: Z3TPSJEY
LU WWN Device Id: 5 000c50 064932539
Firmware Version: KC45
User Capacity: 500107862016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 15 22:04:13 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 86) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 9279720
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 39
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 437255
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 92
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2386
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 073 070 045 Old_age Always - 27 (Min/Max 19/27)
194 Temperature_Celsius 0x0022 027 040 000 Old_age Always - 27 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 050 045 000 Old_age Always - 9279720
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 22h+35m+31.679s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2991976131
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1956932850
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
""
sudo smartctl -t short /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-45-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Fri Feb 15 22:07:08 2019
Use smartctl -X to abort test.
"""
sudo smartctl -l selftest /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-45-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 92 -
Dernière modification par bilounoir (Le 16/02/2019, à 08:36)
#5 Le 16/02/2019, à 09:05
- bilounoir
Re : [Résolu ]Erreurs au boot, parfois blocage de Grub en UEFI 18.04
bonjour
je ne m'y connaît guère dans cela
quelqu'un a une idée d'avance Merci
#6 Le 16/02/2019, à 20:41
- dartan
Re : [Résolu ]Erreurs au boot, parfois blocage de Grub en UEFI 18.04
bonsoir
il y a pas pal de détails qui sembles montrer un disque dur
avec beaucoup d’erreurs
utile aussi de bien connaitre l'anglais pour tout déchiffrer
Hors ligne