Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/06/2018, à 01:07

cybereb

[résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Bonjour à la communauté. Je suis Eric, dev informatique de 45 ans, gamer à mes heures.

Je découvre Ubuntu. Depuis quelques jours, j'essaie d'installer une distribution 16.04 (j'ai aussi essayé 18.04, sans plus de succès) sur une clé USB 32Gb (sdd) depuis une clé USB live 16GB crée avec unetbootin (sdc), mais l'installation plante toujours sur l'étape d'installation de GRUB: "Le paquet grub-efi-amd64-signed n'a pas pu être installé dans /target/." (oui, "encore", je sais)

Mon but est de booter le PC soit sur Windows, soit sur Ubuntu quand la clé est présente, sans passer par un menu de boot (au pire je peux forcer le démarrage sur le support amovible en passant par le bios ).

Ma machine est basée sur une carte mère Asus Maximus VIII datant de 2015 et utilisant UEFI.
Le système lancé par défaut est windows 10 sur SSD 500Gb . J'ai également un disque dur de 1To divisé en trois partitions NTFS de données.

Pour le type d'installation, je choisi "autre", puis installer sur une partition ext2 en la formatant,  sur la clé de 32GB. Point de montage /. La partition d'amorçage est aussi positionnée sur la clé de 32Gb, évidemment.
Je ne sais pas trop si je dois gérer le login/password à l'étape 2 (installation de pilote tiers) pour le secureboot, j'ai essayé avec ou sans, avec le même résultat.

D'après ce que j'ai pu voir, ce genre d'erreur est souvent lié au secure boot  et au fast boot, que je pense avoir désactivé dans windows et dans les paramètre boot du bios, mais il semblerait seule la config complète de la machine permette d'identifier la panne. Je dois aussi avouer que les effets de la plupart des paramètres avancés du Bios Asus (CSM, secure boot...) sont encore un mystère pour moi.
J'aurais donc besoin qu'on me dise quoi tenter comme modif, parce que je tourne en rond autour de ce problème depuis quelques jours et c'est assez frustrant. Les "suggested repairs" du boot-info me laissent perplexe...

Voici donc le boot-info :

============================= Boot Info Summary: ===============================

 => Windows 7/8/2012 is installed in the MBR of /dev/sda.
 => Windows 7/8/2012 is installed in the MBR of /dev/sdb.
 => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdc.
 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdd.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sdb2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.03 2010-10-22 ........>..sr>..........9...0...~.....~...f...M.f.f....f..0~....>E}.u......
    Boot sector info:  Syslinux looks at sector 3284000 of /dev/sdc1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

sdd1: __________________________________________________________________________

    File system:       ext2
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1               2,048 1,034,242,047 1,034,240,000   7 NTFS / exFAT / HPFS
/dev/sda2       1,034,242,048 1,470,466,047   436,224,000   7 NTFS / exFAT / HPFS
/dev/sda3       1,470,466,048 1,953,519,615   483,053,568   7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048     1,126,399     1,124,352   7 NTFS / exFAT / HPFS
/dev/sdb2           1,126,400   976,771,071   975,644,672   7 NTFS / exFAT / HPFS


Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 14.7 GiB, 15733161984 bytes, 30728832 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *          8,064    30,728,831    30,720,768   c W95 FAT32 (LBA)


Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 29.3 GiB, 31406948352 bytes, 61341696 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdd1    *             32    61,341,695    61,341,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        C81E1A691E1A5134                       ntfs       Jeux
/dev/sda2        84EC371FEC370AC6                       ntfs       Downloads
/dev/sda3        EC4C850D4C84D42C                       ntfs       Stockage
/dev/sdb1        E8D2D856D2D82A98                       ntfs       Réservé au système
/dev/sdb2        F486DF1A86DEDC64                       ntfs       
/dev/sdc1        CE06-A3EC                              vfat       LINUXBOOT
/dev/sdd1        eace7120-2ce0-4e4d-affa-8073a71f54fd   ext2       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jun  9 00:57 ata-CT500MX500SSD1_1813E1348A9B -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun  9 00:57 ata-CT500MX500SSD1_1813E1348A9B-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jun  9 00:57 ata-CT500MX500SSD1_1813E1348A9B-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 Jun  9 00:40 ata-HL-DT-ST_DVDRAM_GH24NSC0_K1LF4BG4447 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jun  9 00:57 ata-WDC_WD10EARS-22Y5B1_WD-WCAV5P879386 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun  9 00:57 ata-WDC_WD10EARS-22Y5B1_WD-WCAV5P879386-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun  9 00:57 ata-WDC_WD10EARS-22Y5B1_WD-WCAV5P879386-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun  9 00:57 ata-WDC_WD10EARS-22Y5B1_WD-WCAV5P879386-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Jun  9 00:57 usb-Kingston_DataTraveler_2.0_001731F27C3CBF50894229CD-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jun  9 00:57 usb-Kingston_DataTraveler_2.0_001731F27C3CBF50894229CD-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Jun  9 00:57 usb-SanDisk_Cruzer_Fit_4C530001110109105080-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 10 Jun  9 00:57 usb-SanDisk_Cruzer_Fit_4C530001110109105080-0:0-part1 -> ../../sdd1
lrwxrwxrwx 1 root root  9 Jun  9 00:40 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jun  9 00:57 wwn-0x50014ee25af3ea86 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun  9 00:57 wwn-0x50014ee25af3ea86-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun  9 00:57 wwn-0x50014ee25af3ea86-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun  9 00:57 wwn-0x50014ee25af3ea86-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Jun  9 00:57 wwn-0x500a0751e1348a9b -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun  9 00:57 wwn-0x500a0751e1348a9b-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jun  9 00:57 wwn-0x500a0751e1348a9b-part2 -> ../../sdb2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdc1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sdc1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdc1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- persistent

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit  persistent

label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper  quiet splash --- persistent

label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity  quiet splash --- persistent

label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash --- persistent

label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit  persistent

label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit  persistent

label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- persistent

label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- persistent

label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --- persistent

label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --- persistent

--------------------------------------------------------------------------------

=================== sdc1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdc1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             menu.c32                                       1

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)

=========================== sdd1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd3,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
else
  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd3,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
	else
	  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
	fi
	linux	/boot/vmlinuz-4.13.0-43-generic.efi.signed root=UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.13.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
	menuentry 'Ubuntu, avec Linux 4.13.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-43-generic-advanced-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
		else
		  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
		fi
		echo	'Chargement de Linux 4.13.0-43-generic…'
		linux	/boot/vmlinuz-4.13.0-43-generic.efi.signed root=UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-43-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-43-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-43-generic-init-upstart-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
		else
		  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
		fi
		echo	'Chargement de Linux 4.13.0-43-generic…'
		linux	/boot/vmlinuz-4.13.0-43-generic.efi.signed root=UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-43-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-43-generic-recovery-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
		else
		  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
		fi
		echo	'Chargement de Linux 4.13.0-43-generic…'
		linux	/boot/vmlinuz-4.13.0-43-generic.efi.signed root=UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-43-generic
	}
	menuentry 'Ubuntu, avec Linux 4.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-advanced-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
		else
		  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
		fi
		echo	'Chargement de Linux 4.13.0-36-generic…'
		linux	/boot/vmlinuz-4.13.0-36-generic.efi.signed root=UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-init-upstart-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
		else
		  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
		fi
		echo	'Chargement de Linux 4.13.0-36-generic…'
		linux	/boot/vmlinuz-4.13.0-36-generic.efi.signed root=UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-recovery-eace7120-2ce0-4e4d-affa-8073a71f54fd' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  eace7120-2ce0-4e4d-affa-8073a71f54fd
		else
		  search --no-floppy --fs-uuid --set=root eace7120-2ce0-4e4d-affa-8073a71f54fd
		fi
		echo	'Chargement de Linux 4.13.0-36-generic…'
		linux	/boot/vmlinuz-4.13.0-36-generic.efi.signed root=UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-36-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdd1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdd1 during installation
UUID=eace7120-2ce0-4e4d-affa-8073a71f54fd /               ext2    errors=remount-ro 0       1
--------------------------------------------------------------------------------

=================== sdd1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  15.802558899 = 16.967868416   boot/grub/grub.cfg                             3
  11.274581909 = 12.105990144   boot/vmlinuz-4.13.0-36-generic                 7
   9.944698334 = 10.678038528   boot/vmlinuz-4.13.0-36-generic.efi.signed      8
  12.023597717 = 12.910239744   boot/vmlinuz-4.13.0-43-generic                 6
  15.765636444 = 16.928223232   boot/vmlinuz-4.13.0-43-generic.efi.signed      9
  11.274581909 = 12.105990144   vmlinuz                                        7
  15.772800446 = 16.935915520   boot/initrd.img-4.13.0-36-generic              8
  15.788524628 = 16.952799232   boot/initrd.img-4.13.0-43-generic              8
  15.772800446 = 16.935915520   initrd.img                                     8
  15.772800446 = 16.935915520   initrd.img.old                                 8

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/9760/mounts) leaked on lvs invocation. Parent PID 21948: bash
File descriptor 63 (pipe:[188449]) leaked on lvs invocation. Parent PID 21948: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20180609_0057 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04.4 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
Windows is hibernated, refused to mount.
Failed to mount '/dev/sdb2': Operation not permitted
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option.
mount -t ntfs-3g -o remove_hiberfile /dev/sdb2 /mnt/boot-sav/sdb2

=================== os-prober:
/dev/sdd1:Ubuntu 16.04.4 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/sda1: LABEL="Jeux" UUID="C81E1A691E1A5134" TYPE="ntfs" PARTUUID="8bc2dd00-01"
/dev/sda2: LABEL="Downloads" UUID="84EC371FEC370AC6" TYPE="ntfs" PARTUUID="8bc2dd00-02"
/dev/sda3: LABEL="Stockage" UUID="EC4C850D4C84D42C" TYPE="ntfs" PARTUUID="8bc2dd00-03"
/dev/sdb1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="E8D2D856D2D82A98" TYPE="ntfs" PARTUUID="7119bd79-01"
/dev/sdb2: UUID="F486DF1A86DEDC64" TYPE="ntfs" PARTUUID="7119bd79-02"
/dev/sdc1: LABEL="LINUXBOOT" UUID="CE06-A3EC" TYPE="vfat" PARTUUID="d5490ed3-01"
/dev/sdd1: UUID="eace7120-2ce0-4e4d-affa-8073a71f54fd" TYPE="ext2" PARTUUID="b37ad71c-01"
/dev/loop0: TYPE="squashfs"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Windows not detected by os-prober on sdb2.

=================== sdd1/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Jun  9 00:39 grub.d
total 80
-rwxr-xr-x 1 root root  9791 Feb  8 15:55 00_header
-rwxr-xr-x 1 root root  6258 Jan 24 22:21 05_debian_theme
-rwxr-xr-x 1 root root 12512 Feb  8 15:55 10_linux
-rwxr-xr-x 1 root root 11082 Feb  8 15:55 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Feb  8 15:55 30_os-prober
-rwxr-xr-x 1 root root  1418 Feb  8 15:55 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Feb  8 15:55 40_custom
-rwxr-xr-x 1 root root   216 Feb  8 15:55 41_custom
-rw-r--r-- 1 root root   483 Feb  8 15:55 README




=================== sdd1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== efibootmgr -v
BootCurrent: 0005
Timeout: 1 seconds
BootOrder: 0005,0002,0006,0001,0003,0004
Boot0001  WDC WD10EARS-22Y5B1	BBS(HD,,0x0)..BO
Boot0002* CT500MX500SSD1	BBS(HD,,0x0)..BO
Boot0003  SanDisk	BBS(HD,,0x0)..BO
Boot0004  HL-DT-ST DVDRAM GH24NSC0	BBS(CDROM,,0x0)..BO
Boot0005* UEFI: KingstonDataTraveler 2.0PMAP, Partition 1	PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/HD(1,MBR,0x4294967251,0x1f80,0x1d4c300)..BO
Boot0006* KingstonDataTraveler 2.0PMAP	BBS(HD,,0x0)..BO

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda2.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda3.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb1.
sdb2	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb2.
sdd1	: sdd,	not-sepboot,	no-grubenv	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdd1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdd	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	usb-disk,	not-mmc, has-os,	32 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA WDC WD10EARS-22Y:;
1:1049kB:530GB:530GB:ntfs::;
2:530GB:753GB:223GB:ntfs::;
3:753GB:1000GB:247GB:ntfs::;

BYT;
/dev/sdb:500GB:scsi:512:512:msdos:ATA CT500MX500SSD1:;
1:1049kB:577MB:576MB:ntfs::boot;
2:577MB:500GB:500GB:ntfs::;

BYT;
/dev/sdc:15.7GB:scsi:512:512:msdos:Kingston DataTraveler 2.0:;
1:4129kB:15.7GB:15.7GB:fat32::boot, lba;

BYT;
/dev/sdd:31.4GB:scsi:512:512:msdos:SanDisk Cruzer Fit:;
1:16.4kB:31.4GB:31.4GB:ext2::boot;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
sdd   disk           29.3G
sdd1  part ext2      29.3G
sdb   disk          465.8G
sdb2  part ntfs     465.2G
sdb1  part ntfs       549M Réservé au système
sr0   rom            1024M
loop0 loop squashfs   1.5G
sdc   disk           14.7G
sdc1  part vfat      14.7G LINUXBOOT
sda   disk          931.5G
sda2  part ntfs       208G Downloads
sda3  part ntfs     230.3G Stockage
sda1  part ntfs     493.2G Jeux

KNAME ROTA RO RM STATE   MOUNTPOINT
sdd      1  0  1 running
sdd1     1  0  1         /mnt/boot-sav/sdd1
sdb      0  0  0 running
sdb2     0  0  0         /mnt/boot-sav/sdb2
sdb1     0  0  0         /mnt/boot-sav/sdb1
sr0      1  0  1 running
loop0    1  1  0         /rofs
sdc      1  0  1 running
sdc1     1  0  1         /cdrom
sda      1  0  0 running
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0         /mnt/boot-sav/sda3
sda1     1  0  0         /mnt/boot-sav/sda1


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8163828k,nr_inodes=2040957,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1636312k,mode=755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
aufs on / type aufs (rw,noatime,si=a4b1a23809d11031)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=23,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13673)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=1636312k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdd1 on /mnt/boot-sav/sdd1 type ext2 (rw,relatime,block_validity,barrier,user_xattr,acl)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdd1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-19 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdb2 sdc sdc1 sdd sdd1 sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 3f a5 3d 00 00 00 00  |.........?.=....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  34 51 1a 1e 69 1a 1e c8  |........4Q..i...|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 45 72  |t.............Er|
00000190  72 65 75 72 20 6c 65 63  74 75 72 65 20 64 69 73  |reur lecture dis|
000001a0  71 75 65 00 0d 0a 42 4f  4f 54 4d 47 52 20 61 62  |que...BOOTMGR ab|
000001b0  73 65 6e 74 00 0d 0a 42  4f 4f 54 4d 47 52 20 63  |sent...BOOTMGR c|
000001c0  6f 6d 70 72 65 73 73 82  00 0d 0a 43 74 72 6c 2b  |ompress....Ctrl+|
000001d0  41 6c 74 2b 53 75 70 70  72 20 70 6f 75 72 20 72  |Alt+Suppr pour r|
000001e0  65 64 82 6d 61 72 72 65  72 0d 0a 00 6f 20 72 65  |ed.marrer...o re|
000001f0  73 74 61 72 74 0d 0a 00  8c a4 b5 c9 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 48 a5 3d  |........?....H.=|
00000020  00 00 00 00 80 00 80 00  ff 3f 00 1a 00 00 00 00  |.........?......|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  c6 0a 37 ec 1f 37 ec 84  |..........7..7..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 45 72  |t.............Er|
00000190  72 65 75 72 20 6c 65 63  74 75 72 65 20 64 69 73  |reur lecture dis|
000001a0  71 75 65 00 0d 0a 42 4f  4f 54 4d 47 52 20 61 62  |que...BOOTMGR ab|
000001b0  73 65 6e 74 00 0d 0a 42  4f 4f 54 4d 47 52 20 63  |sent...BOOTMGR c|
000001c0  6f 6d 70 72 65 73 73 82  00 0d 0a 43 74 72 6c 2b  |ompress....Ctrl+|
000001d0  41 6c 74 2b 53 75 70 70  72 20 70 6f 75 72 20 72  |Alt+Suppr pour r|
000001e0  65 64 82 6d 61 72 72 65  72 0d 0a 00 6f 20 72 65  |ed.marrer...o re|
000001f0  73 74 61 72 74 0d 0a 00  8c a4 b5 c9 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 a5 57  |........?......W|
00000020  00 00 00 00 80 00 80 00  ff cf ca 1c 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  2c d4 84 4c 0d 85 4c ec  |........,..L..L.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 45 72  |t.............Er|
00000190  72 65 75 72 20 6c 65 63  74 75 72 65 20 64 69 73  |reur lecture dis|
000001a0  71 75 65 00 0d 0a 42 4f  4f 54 4d 47 52 20 61 62  |que...BOOTMGR ab|
000001b0  73 65 6e 74 00 0d 0a 42  4f 4f 54 4d 47 52 20 63  |sent...BOOTMGR c|
000001c0  6f 6d 70 72 65 73 73 82  00 0d 0a 43 74 72 6c 2b  |ompress....Ctrl+|
000001d0  41 6c 74 2b 53 75 70 70  72 20 70 6f 75 72 20 72  |Alt+Suppr pour r|
000001e0  65 64 82 6d 61 72 72 65  72 0d 0a 00 6f 20 72 65  |ed.marrer...o re|
000001f0  73 74 61 72 74 0d 0a 00  8c a4 b5 c9 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 27 11 00 00 00 00 00  |.........'......|
00000030  00 b7 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  98 2a d8 d2 56 d8 d2 e8  |.........*..V...|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 30 11 00  |........?....0..|
00000020  00 00 00 00 80 00 80 00  ff 27 27 3a 00 00 00 00  |.........'':....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  64 dc de 86 1a df 86 f4  |........d.......|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.8G     0  7.8G   0% /dev
tmpfs          tmpfs     1.6G  9.6M  1.6G   1% /run
/dev/sdc1      vfat       15G  2.6G   13G  18% /cdrom
/dev/loop0     squashfs  1.5G  1.5G     0 100% /rofs
aufs           aufs      7.9G  162M  7.7G   3% /
tmpfs          tmpfs     7.9G   16M  7.8G   1% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
tmpfs          tmpfs     7.9G     0  7.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     7.9G  784K  7.9G   1% /tmp
tmpfs          tmpfs     1.6G   88K  1.6G   1% /run/user/999
/dev/sda1      fuseblk   494G  303G  191G  62% /mnt/boot-sav/sda1
/dev/sda2      fuseblk   209G  176G   33G  85% /mnt/boot-sav/sda2
/dev/sda3      fuseblk   231G   98G  134G  43% /mnt/boot-sav/sda3
/dev/sdb1      fuseblk   549M  395M  155M  72% /mnt/boot-sav/sdb1
/dev/sdb2      fuseblk   466G   43G  423G  10% /mnt/boot-sav/sdb2
/dev/sdd1      ext2       29G  5.0G   23G  19% /mnt/boot-sav/sdd1

=================== fdisk -l:
Disk /dev/loop0: 1.5 GiB, 1564921856 bytes, 3056488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x8bc2dd00

Device     Boot      Start        End    Sectors   Size Id Type
/dev/sda1             2048 1034242047 1034240000 493.2G  7 HPFS/NTFS/exFAT
/dev/sda2       1034242048 1470466047  436224000   208G  7 HPFS/NTFS/exFAT
/dev/sda3       1470466048 1953519615  483053568 230.3G  7 HPFS/NTFS/exFAT


Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7119bd79

Device     Boot   Start       End   Sectors   Size Id Type
/dev/sdb1  *       2048   1126399   1124352   549M  7 HPFS/NTFS/exFAT
/dev/sdb2       1126400 976771071 975644672 465.2G  7 HPFS/NTFS/exFAT


Disk /dev/sdc: 14.7 GiB, 15733161984 bytes, 30728832 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd5490ed3

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdc1  *     8064 30728831 30720768 14.7G  c W95 FAT32 (LBA)


Disk /dev/sdd: 29.3 GiB, 31406948352 bytes, 61341696 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xb37ad71c

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdd1  *       32 61341695 61341664 29.3G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub2 of sdd1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot


=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sdd (SanDisk Cruzer Fit) disk! Please disable SecureBoot in the BIOS.


=================== User settings
The settings chosen by the user will not act on the boot.

Dernière modification par cybereb (Le 10/06/2018, à 09:12)

Hors ligne

#2 Le 09/06/2018, à 08:07

ikewdu

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Salut,

Je saisis mal ce que tu cherches à faire... Tu veux installer Ubuntu sur une clé usb (premier bof) sur un PC dont tous les disques sont au format dos, autrement dit qui fonctionne pour le reste en Legacy. Même la clé que tu as choisie est au format dos :

Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 29.3 GiB, 31406948352 bytes, 61341696 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
/dev/sdd1    *             32    61,341,695    61,341,664  83 Linux

Du coup, ton installation n'a pour possibilité de créer les fichiers de démarrage que l'autre clé usb, en fat32 (qui est en même temps la clé d'installation).

sdc1: __________________________________________________________________________
    File system:       vfat
    Boot sector type:  SYSLINUX 4.03 2010-10-22 ........>..sr>..........9...0...~.....~...f...M.f.f....f..0~....>E}.u......
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys


Bref, il faut que tu changes ta stratégie :

- Soit tu passes sdd au format gpt et tu tentes ton installation complète en UEFI sur cette clé (sans préjuger du fait que l'installateur qui pointe généralement automatiquement vers sda risque à nouveau de t'envoyer le même message. Si besoin, tu forces manuellement la création d'une petite partition fat32 avec le drapeau boot sur cette clé pour faire ensuite une réparation manuelle de grub si ça ne fonctionne pas automatiquement.

- Soit, tu installes en Legacy (comme le reste de tes OS, ce qui serait plus logique) et tu installes ton grub dans le mbr de la clé, ce qui te permettra d'avoir un dual-boot qui n'impactera en rien le fonctionnement du reste de ta machine.

- Compte tenu que tu veux une utilisation "occasionnelle" de ton Linux, je pense que tu gagnerais à créer une machine virtuelle avec vmware ou virtualbox et à installer ton Ubuntu directement sous Windows... Et quand tu juges que tu es prêt, tu ajoutes un HD et tu crées un dual-boot digne de ce nom.

Et pourquoi de l'ext2 ? En principe, on utilise l'ext4.

Dernière modification par ikewdu (Le 09/06/2018, à 08:15)

Hors ligne

#3 Le 09/06/2018, à 14:42

cybereb

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Merci pour ta réponse Ikewdu.

Alors, je vais essayer de répondre dans l'ordre au vu de mes maigres compétences en système et réseaux.

Je voulais dans un premier temps une installation qui me permette de ne pas investir dans du matériel, pour tester, et qui ne m'oblige pas à bidouiller mes partitions existantes.
Je comptais sur mes 16Gb de ram pour avoir un système à peu près performant (d'ailleurs ça semble fonctionner très bien sur la clé de boot). Et à long terme, me diriger sur une solution plus solide avec une partition SDD dédiée, effectivement.

La machine virtuelle sous windows... je trouve que c'est rajouter une couche de complexité sur quelque chose de relativement complexe à la base, et vu que je suis partisan des solutions les plus simples, si je peux éviter, j'éviterai. Après, s'il faut vraiment, il faudra que je m'y intéresse aussi.

Au vu de ce que tu m'écris, les fichiers de démarrage de la clé de boot ne peuvent pas être utilisés pour la clé définitive, pour cause d’incompatibilité FAT32/ext2, et c'est la raison de mon blocage.

En fait je suivais cette procédure, qui préconisait FAT32 de bout en bout :
https://www.digital-dynamics.fr/FR/info … e-usb.html

Mais à l'étape "type d'installation", je ne peux pas choisir FAT32. L'installateur annonce que ce type de partition ne peut pas faire booter Ubuntu, et c'est lui qui préconise ext2 à la place.

Donc je suppose qu'il y a un moyen de le forcer à utiliser le formatage et l'installation en FAT32 à ce moment ? comment procéder ?

Hors ligne

#4 Le 09/06/2018, à 15:11

ikewdu

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Re,

Je voulais dans un premier temps une installation qui me permette de ne pas investir dans du matériel, pour tester, et qui ne m'oblige pas à bidouiller mes partitions existantes. Je comptais sur mes 16Gb de ram pour avoir un système à peu près performant

Tu as donc plutôt intérêt à utiliser plutôt un PC virtuel... Avec 16 Go, ça tournera bien. Car, en usb , ce n'est pas la ram qui va coincer, mais l'usb (même l'usb3 freine sérieusement un OS). Et si tu ne maîtrises pas, contrairement à ce que tu penses, c'est beaucoup plus prudent.

Quant à ton lien, il ne parle nullement d'installation en uefi, et pour être honnête, c'est la première fois que je vois proposer d'installer la racine d'un Linux sur une partition fat32... Quelqu'un confirmera peut-être cette possibilité, mais j'avoue être très sceptique. Si tu veux vraiment faire une installation sur clé usb, démarre ton live-usb en mode Legacy,  formate ta clé de destination en ext4, et installe grub dans le mbr de cette clé. Mais ne te plante pas, car par défaut, l'installateur voudra coller grub sur le disque dur. Pour avoir ensuite un message d'erreur grub rescue> il n'y a pas mieux.

Hors ligne

#5 Le 09/06/2018, à 15:12

malbo

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Extrait de ton post #1 :

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.

Il faut que tu modifies le paramétrage de ton système UEFI afin d'imposer le mode de démarrage en mode Bios classique (non-EFI) alors qu'actuellement le mode de démarrage est en mode EFI. Quand ce sera fait, le démarrage sur ta liveUSB de 16 Go se fera en mode non-EFI et tu pourras faire une installation en mode non-EFI.

Justification : pour un multiboot, tous les OS doivent être installés dans le même mode (voir mon tuto) : soit tout le monde en mode EFI, soit tout le monde en mode non-EFI. Dans ton cas, comme tu as Windows 10 déjà installé en mode non-EFI, il faut installer Ubuntu en mode non-EFI également.

Dernière modification par malbo (Le 09/06/2018, à 15:18)

Hors ligne

#6 Le 09/06/2018, à 15:41

ikewdu

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Salut,

Note que c'est ce que j'ai dit dans mes deux réponses. Je rappelle mon avertissement sur le choix de l'emplacement de grub, pour ne pas avoir de surprise lors du débranchement de la clé.

Hors ligne

#7 Le 09/06/2018, à 16:20

malbo

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Exact, c'est ce que tu as proposé. Et tu as insisté fort justement sur l'emplacement du chargeur d'amorçage de Grub :

ikewdu a écrit :

installe grub dans le mbr de cette clé. Mais ne te plante pas, car par défaut, l'installateur voudra coller grub sur le disque dur. Pour avoir ensuite un message d'erreur grub rescue> il n'y a pas mieux.

Hors ligne

#8 Le 09/06/2018, à 23:55

cybereb

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Merci pour vos messages.

Ce que j'ai fait :
- j'ai changé, dans le firmware UEFI , le paramètre -> boot -> CSM ->Boot device Control à "OPROM ONLY"
- j'ai changé le paramètre -> boot -> secure boot -> OS Type à "OTHER TYPE".

Puis  à l'installation, j'ai choisi le type ext4 pour la partition de destination.
Et l'installation s'est faite sans problème. La clé créée avec Ubuntu boote bien.

Petite frayeur en revenant sur  Windows : j'ai eu une tentative de réparation, visiblement il y a eu un truc pété dans la manip. Cette réparation a d'ailleurs échoué.
Mais au deuxième redémarrage, ça re-fonctionnait normalement, ouf.

Je vais aussi m'intéresser aux machines virtuelles, ça n'a pas l'air bien compliqué de faire tourner ubuntu dessus..

Merci à vous pour l'aide.

Hors ligne

#9 Le 10/06/2018, à 06:05

malbo

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

cybereb a écrit :

Ce que j'ai fait :
- j'ai changé, dans le firmware UEFI , le paramètre -> boot -> CSM ->Boot device Control à "OPROM ONLY"

C'est à peu près ça : l'examen du manuel de ta carte-mère (ici) explique que le paramètre "Launch CSM" doit être réglée sur [Enabled] et ce faisant on peut avoir accès au paramètre "Boot Devices Control" qui peut être positionné sur l'un des 3 choix :
[UEFI and Legacy OpROM]
[Legacy OpROM only]
[UEFI only]
C'est [Legacy OpROM only] que tu as sélectionné et c'est bien ce qu'il convenait de faire pour imposer le démarrage en mode non-EFI en excluant toute possibilité de démarrage en mode EFI

cybereb a écrit :

- j'ai changé le paramètre -> boot -> secure boot -> OS Type à "OTHER TYPE".

Le manuel indique deux choix possibles pour le paramètre "OS Type" :
[Windows UEFI Mode] (le manuel précise que ça active "Secure Boot").
[Other OS]
Tu as sélectionné [Other OS] ce qui veut dire que tu as désactivé "Secure Boot". C'est peut-être pour ça que ton Windows a râlé au premier démarrage qui a suivi : il a dû détecter que "Secure Boot" avait été désactivé.

Dernière modification par malbo (Le 10/06/2018, à 06:24)

Hors ligne

#10 Le 10/06/2018, à 09:19

cybereb

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

Oui, ça devait être ça, à une heure du matin, ma mémoire commençait à avoir des ratés ^^

Problème d'installation initial réglé pour moi.

Question subsidiaire : Ubuntu est-il capable de s'upgrader tout seul en version 18.04, si on lui fournit un Iso, ou faut-il recréer une clé d'installation ?

Hors ligne

#11 Le 10/06/2018, à 09:49

moko138

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

@ ikewdu,
l'ext2 est un choix justifié pour une installation véritable (non live) sur la mémoire d'une clef usb.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#12 Le 10/06/2018, à 11:05

malbo

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

cybereb a écrit :

Question subsidiaire : Ubuntu est-il capable de s'upgrader tout seul en version 18.04

La mise à niveau vers 18.04 te sera proposée fin juillet/début Août 2018 par le Gestionnaire de mise à jour. Il faudra que tu valides cette proposition pour que la mise à niveau se fasse (la mise à niveau 16.04 vers 18.04 ne se fera pas automatiquement sans que tu fasses cette validation). J'espère que d'ici là tu auras apprécié Ubuntu et que tu te décideras à faire une installation en cohabitation avec Windows sur ton SSD au lieu de l'install actuelle sur clé USB.

Dernière modification par malbo (Le 10/06/2018, à 11:08)

Hors ligne

#13 Le 10/06/2018, à 22:24

ikewdu

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

moko138 a écrit :

@ ikewdu,
l'ext2 est un choix justifié pour une installation véritable (non live) sur la mémoire d'une clef usb.

Salut,

Quel est le bénéfice par rapport à l'ext4 (pour ma culture personnelle) ?

Hors ligne

#14 Le 11/06/2018, à 07:13

moko138

Re : [résolu]Problème d'installation paquet Grub -Ubuntu 16.04 sur clé USB

ikewdu a écrit :
moko138 a écrit :

@ ikewdu,
l'ext2 est un choix justifié pour une installation véritable (non live) sur la mémoire d'une clef usb.

Quel est le bénéfice par rapport à l'ext4 (pour ma culture personnelle) ?

Salut,
L'absence de journalisation de l'ext2 présente :
     un inconvénient
en ceci que la récupération est plus difficile en cas de pépin (coupure de courant, gel du système, débranchement accidentel) ;

     un avantage
en ceci qu'il y a moins d'écritures, ce qui limite l'usure de de la clef.
Il est alors cohérent de mettre /var/log en RAM, tout en sachant que cela rendra les dépannages moins aisés.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne