[ABANDON] NFS non pris en charge au démarrage

Pympc · Le 04/04/2018, à 15:35

Bonjour à tous

Depuis quelques jours, mon NAS n'est plus accessible au démarrage d'Ubuntu. Il me faut systématiquement faire un sudo mount -a dans un terminal !

Pour infos ma lligne fstab est la suivante :

192.168.1.10:/volume1/music /home/DD/ServMusique nfs _netdev,defaults,user,auto,noatime,rsize=16384,wsize=16384 0 0

jusqu'ici Ubuntu était la seule distribution à fonctionner correctement, aujourd'hui c'est comme les autres.
L'un d'entre vous à t'il une idée de ce qu'il se passe.

merci

Dernière modification par Pympc (Le 24/06/2018, à 11:18)

?? · Le 04/04/2018, à 15:46

Pympc a écrit :

Bonjour à tous
Depuis quelques jours, mon NAS n'est plus accessible au démarrage d'Ubuntu. Il me faut systématiquement faire un sudo mount -a dans un terminal !
Pour infos ma lligne fstab est la suivante :
192.168.1.10:/volume1/music /home/DD/ServMusique nfs _netdev,defaults,user,auto,noatime,rsize=16384,wsize=16384 0 0
jusqu'ici Ubuntu était la seule distribution à fonctionner correctement, aujourd'hui c'est comme les autres.
L'un d'entre vous à t'il une idée de ce qu'il se passe.
merci

Bonjour
à tout hasard, on pourrait trouver une trace au démarrage.
Peux-tu donner les retours des deux commandes suivantes

dmesg | head -600

dmesg | head -1200 | tail -600

Pympc · Le 30/04/2018, à 10:00

Désolé de cette réponse tardive mais je n'ai pas reçu de notification comme quoi j'avais une réponse et que d'autres part, je fais un sudo mount -a à chaque fois que je veux utiliser mon NAS.

A noter que j'ai fait la mise à niveau vers 18.10 et que j'ai toujours le même problème.
pour infos

$ dmesg | head -600
[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x4ef with crng_init=0
[    0.000000] Linux version 4.13.0-38-generic (buildd@lgw01-amd64-042) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #43-Ubuntu SMP Wed Mar 14 15:20:44 UTC 2018 (Ubuntu 4.13.0-38.43-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=UUID=6614f0c0-6456-4228-9e11-09b79b2ae589 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000abf42fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000abf43000-0x00000000abf49fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000abf4a000-0x00000000ac3a9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ac3aa000-0x00000000ac81ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ac820000-0x00000000bda34fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bda35000-0x00000000bddc4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bddc5000-0x00000000bdde2fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bdde3000-0x00000000be30bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000be30c000-0x00000000beffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUS All Series/Z97-A, BIOS 2801 11/11/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 0400000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0420000000 mask 7FF0000000 write-back
[    0.000000]   3 base 0430000000 mask 7FF8000000 write-back
[    0.000000]   4 base 0438000000 mask 7FFC000000 write-back
[    0.000000]   5 base 043C000000 mask 7FFE000000 write-back
[    0.000000]   6 base 043E000000 mask 7FFF000000 write-back
[    0.000000]   7 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 16368M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd930-0x000fd93f] mapped at [ffff92d0000fd930]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff92d000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1b52e000, 0x1b52efff] PGTABLE
[    0.000000] BRK [0x1b52f000, 0x1b52ffff] PGTABLE
[    0.000000] BRK [0x1b530000, 0x1b530fff] PGTABLE
[    0.000000] BRK [0x1b531000, 0x1b531fff] PGTABLE
[    0.000000] BRK [0x1b532000, 0x1b532fff] PGTABLE
[    0.000000] BRK [0x1b533000, 0x1b533fff] PGTABLE
[    0.000000] BRK [0x1b534000, 0x1b534fff] PGTABLE
[    0.000000] BRK [0x1b535000, 0x1b535fff] PGTABLE
[    0.000000] BRK [0x1b536000, 0x1b536fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32143000-0x35098fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BDDCB080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BDDDADF0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BDDCB198 00FC58 (v02 ALASKA A M I    00000011 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000BE30BF80 000040
[    0.000000] ACPI: APIC 0x00000000BDDDAF00 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BDDDAF98 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BDDDAFE0 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000BDDDBC60 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000BDDDC1A0 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000BDDDCD18 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BDDDCD58 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000BDDDCD90 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000BDDDD100 005977 (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: UEFI 0x00000000BDDE2AD0 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43efd3000-0x43effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000abf42fff]
[    0.000000]   node   0: [mem 0x00000000abf4a000-0x00000000ac3a9fff]
[    0.000000]   node   0: [mem 0x00000000ac820000-0x00000000bda34fff]
[    0.000000]   node   0: [mem 0x00000000befff000-0x00000000beffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[    0.000000] On node 0 totalpages: 4179285
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12055 pages used for memmap
[    0.000000]   DMA32 zone: 771513 pages, LIFO batch:31
[    0.000000]   Normal zone: 53184 pages used for memmap
[    0.000000]   Normal zone: 3403776 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xabf43000-0xabf49fff]
[    0.000000] PM: Registered nosave memory: [mem 0xac3aa000-0xac81ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbda35000-0xbddc4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbddc5000-0xbdde2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdde3000-0xbe30bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe30c000-0xbeffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff92d43ec00000 s146520 r8192 d29608 u262144
[    0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4113961
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=UUID=6614f0c0-6456-4228-9e11-09b79b2ae589 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16312928K/16717140K available (12300K kernel code, 2482K rwdata, 4000K rodata, 2376K init, 2372K bss, 404212K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37838 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3498.182 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6996.36 BogoMIPS (lpj=13992728)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.014915] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.014931] Security Framework initialized
[    0.014932] Yama: becoming mindful.
[    0.014944] AppArmor: AppArmor initialized
[    0.016991] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.018006] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.018044] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018077] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018216] CPU: Physical Processor ID: 0
[    0.018216] CPU: Processor Core ID: 0
[    0.018220] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018220] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018221] FEATURE SPEC_CTRL Present
[    0.018224] mce: CPU supports 9 MCE banks
[    0.018230] CPU0: Thermal monitoring enabled (TM1)
[    0.018240] process: using mwait in idle threads
[    0.018242] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.018243] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.018244] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.018244] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.018245] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.018327] Freeing SMP alternatives memory: 36K
[    0.020044] smpboot: Max logical packages: 2
[    0.020359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.060695] TSC deadline timer enabled
[    0.060696] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.060736] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.060765] ... version:                3
[    0.060765] ... bit width:              48
[    0.060765] ... generic registers:      4
[    0.060766] ... value mask:             0000ffffffffffff
[    0.060766] ... max period:             00007fffffffffff
[    0.060766] ... fixed-purpose events:   3
[    0.060767] ... event mask:             000000070000000f
[    0.060789] Hierarchical SRCU implementation.
[    0.061422] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.061432] smp: Bringing up secondary CPUs ...
[    0.061475] x86: Booting SMP configuration:
[    0.061475] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.069230] smp: Brought up 1 node, 8 CPUs
[    0.069230] smpboot: Total of 8 processors activated (55970.91 BogoMIPS)
[    0.072352] devtmpfs: initialized
[    0.072352] x86/mm: Memory block size: 128MB
[    0.072799] evm: security.selinux
[    0.072799] evm: security.SMACK64
[    0.072800] evm: security.SMACK64EXEC
[    0.072800] evm: security.SMACK64TRANSMUTE
[    0.072800] evm: security.SMACK64MMAP
[    0.072801] evm: security.ima
[    0.072801] evm: security.capability
[    0.072810] PM: Registering ACPI NVS region [mem 0xabf43000-0xabf49fff] (28672 bytes)
[    0.072810] PM: Registering ACPI NVS region [mem 0xbdde3000-0xbe30bfff] (5410816 bytes)
[    0.072810] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.072810] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.072810] pinctrl core: initialized pinctrl subsystem
[    0.072810] RTC time:  8:39:16, date: 04/30/18
[    0.072810] NET: Registered protocol family 16
[    0.072810] cpuidle: using governor ladder
[    0.072810] cpuidle: using governor menu
[    0.072810] PCCT header not found.
[    0.072810] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.072810] ACPI: bus type PCI registered
[    0.072810] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.072810] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.072810] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.072810] PCI: Using configuration type 1 for base access
[    0.072810] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.072859] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.072859] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.072860] ACPI: Added _OSI(Module Device)
[    0.072860] ACPI: Added _OSI(Processor Device)
[    0.072860] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.072860] ACPI: Added _OSI(Processor Aggregator Device)
[    0.072860] ACPI: Executed 4 blocks of module-level executable AML code
[    0.076115] ACPI: Dynamic OEM Table Load:
[    0.076115] ACPI: SSDT 0xFFFF92D42BCCC400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.076207] ACPI: Dynamic OEM Table Load:
[    0.076207] ACPI: SSDT 0xFFFF92D42C1CC800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.080128] ACPI: Dynamic OEM Table Load:
[    0.080128] ACPI: SSDT 0xFFFF92D42BCA4400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.081068] ACPI: EC: EC started
[    0.081068] ACPI: EC: interrupt blocked
[    0.081078] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.081079] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.081080] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.081081] ACPI: Interpreter enabled
[    0.081107] ACPI: (supports S0 S3 S4 S5)
[    0.081107] ACPI: Using IOAPIC for interrupt routing
[    0.081133] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.081338] ACPI: Enabled 11 GPEs in block 00 to 3F
[    0.081959] ACPI: Power Resource [PG00] (on)
[    0.082151] ACPI: Power Resource [PG01] (on)
[    0.082331] ACPI: Power Resource [PG02] (on)
[    0.088222] ACPI: Power Resource [FN00] (off)
[    0.088268] ACPI: Power Resource [FN01] (off)
[    0.088312] ACPI: Power Resource [FN02] (off)
[    0.088356] ACPI: Power Resource [FN03] (off)
[    0.088398] ACPI: Power Resource [FN04] (off)
[    0.089134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.089138] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.089295] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.089391] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.089392] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.089962] PCI host bridge to bus 0000:00
[    0.089964] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.089965] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.089966] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.089967] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.089968] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.089968] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.089969] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.089970] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.089971] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.089972] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[    0.089973] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.089979] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.090041] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.090068] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.090137] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[    0.090163] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.090244] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.090261] pci 0000:00:14.0: reg 0x10: [mem 0xdf220000-0xdf22ffff 64bit]
[    0.090312] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.090358] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.090376] pci 0000:00:16.0: reg 0x10: [mem 0xdf23a000-0xdf23a00f 64bit]
[    0.090428] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.090488] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[    0.090503] pci 0000:00:19.0: reg 0x10: [mem 0xdf200000-0xdf21ffff]
[    0.090509] pci 0000:00:19.0: reg 0x14: [mem 0xdf238000-0xdf238fff]
[    0.090516] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
[    0.090564] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.090611] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.090629] pci 0000:00:1a.0: reg 0x10: [mem 0xdf237000-0xdf2373ff]
[    0.090701] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.090749] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.090765] pci 0000:00:1b.0: reg 0x10: [mem 0xdf230000-0xdf233fff 64bit]
[    0.090968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.091026] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.091083] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.091155] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[    0.091213] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.091284] pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
[    0.091341] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.091412] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.091430] pci 0000:00:1d.0: reg 0x10: [mem 0xdf236000-0xdf2363ff]
[    0.091502] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.091553] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.091688] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.091701] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
[    0.091706] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
[    0.091712] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
[    0.091717] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
[    0.091723] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.091728] pci 0000:00:1f.2: reg 0x24: [mem 0xdf235000-0xdf2357ff]
[    0.091757] pci 0000:00:1f.2: PME# supported from D3hot
[    0.091945] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.091959] pci 0000:00:1f.3: reg 0x10: [mem 0xdf234000-0xdf2340ff 64bit]
[    0.091975] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.092054] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.092083] pci 0000:02:00.0: [10de:1402] type 00 class 0x030000
[    0.092100] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.092109] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.092118] pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.092124] pci 0000:02:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.092130] pci 0000:02:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.092214] pci 0000:02:00.1: [10de:0fba] type 00 class 0x040300
[    0.092226] pci 0000:02:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[    0.092321] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.092323] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.092324] pci 0000:00:01.1:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.092327] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.092391] acpiphp: Slot [1] registered
[    0.092394] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.092442] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.092567] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[    0.092574] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.092575] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.092576] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.092576] pci 0000:00:1c.3:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.092577] pci 0000:00:1c.3:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.092578] pci 0000:00:1c.3:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.092579] pci 0000:00:1c.3:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.092580] pci 0000:00:1c.3:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.092581] pci 0000:00:1c.3:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.092582] pci 0000:00:1c.3:   bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[    0.092668] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.092685] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.092685] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.092686] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.092687] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.092688] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.092689] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.092690] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.092691] pci 0000:04:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.092691] pci 0000:04:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.092692] pci 0000:04:00.0:   bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[    0.092771] pci 0000:06:00.0: [1106:3483] type 00 class 0x0c0330
[    0.092940] pci 0000:06:00.0: reg 0x10: [mem 0xdf100000-0xdf100fff 64bit]
[    0.093025] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104025] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.104029] pci 0000:00:1c.6:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.104536] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.104570] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.104602] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.104633] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.104665] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.104697] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.104728] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.104759] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.104979] ACPI: EC: interrupt unblocked
[    0.104983] ACPI: EC: event unblocked
[    0.104988] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.104988] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.105118] SCSI subsystem initialized
[    0.105129] libata version 3.00 loaded.
[    0.105129] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.105129] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.105129] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.105129] vgaarb: loaded
[    0.105129] ACPI: bus type USB registered
[    0.105129] usbcore: registered new interface driver usbfs
[    0.105129] usbcore: registered new interface driver hub
[    0.105129] usbcore: registered new device driver usb
[    0.105129] EDAC MC: Ver: 3.0.0
[    0.105129] PCI: Using ACPI for IRQ routing
[    0.110381] PCI: pci_cache_line_size set to 64 bytes
[    0.110417] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.110417] e820: reserve RAM buffer [mem 0xabf43000-0xabffffff]
[    0.110418] e820: reserve RAM buffer [mem 0xac3aa000-0xafffffff]
[    0.110419] e820: reserve RAM buffer [mem 0xbda35000-0xbfffffff]
[    0.110420] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.110420] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[    0.110472] NetLabel: Initializing
[    0.110472] NetLabel:  domain hash size = 128
[    0.110472] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.110481] NetLabel:  unlabeled traffic allowed by default
[    0.110491] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.110491] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.112012] clocksource: Switched to clocksource hpet
[    0.118634] VFS: Disk quotas dquot_6.6.0
[    0.118646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.118712] AppArmor: AppArmor Filesystem Enabled
[    0.118738] pnp: PnP ACPI init
[    0.118817] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.118819] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.118883] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.118885] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.118898] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.118920] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.118922] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.118989] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.118990] system 00:04: [io  0x02a0-0x02af] has been reserved
[    0.118991] system 00:04: [io  0x0a00-0x0aff] has been reserved
[    0.118993] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119025] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.119027] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119179] pnp 00:06: [dma 0 disabled]
[    0.119209] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.119415] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.119416] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.119417] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.119418] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.119419] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.119420] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.119421] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.119422] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.119423] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.119424] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.119426] system 00:07: [mem 0xdffe0000-0xdffeffff] has been reserved
[    0.119427] system 00:07: [mem 0xdfff0000-0xdfffffff] has been reserved
[    0.119428] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119541] pnp: PnP ACPI: found 8 devices
[    0.125129] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.125163] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.125168] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.125169] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.125171] pci 0000:00:01.1:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.125173] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.125175] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.125183] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.125198] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.125206] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.125209] pci 0000:00:1c.6:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.125215] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.125216] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.125217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.125218] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.125218] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.125219] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.125220] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.125221] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.125222] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.125223] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfeafffff window]
[    0.125224] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.125225] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.125226] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.125227] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.125228] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.125229] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.125230] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.125231] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.125232] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.125233] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.125234] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.125235] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.125236] pci_bus 0000:04: resource 13 [mem 0xc0000000-0xfeafffff window]
[    0.125237] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.125237] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.125238] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.125239] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.125240] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.125241] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.125242] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.125243] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.125244] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.125245] pci_bus 0000:05: resource 13 [mem 0xc0000000-0xfeafffff window]
[    0.125246] pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.125317] NET: Registered protocol family 2
[    0.125428] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.125564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.125658] TCP: Hash tables configured (established 131072 bind 65536)
[    0.125685] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.125717] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.125767] NET: Registered protocol family 1
[    0.172086] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.172196] PCI: CLS 64 bytes, default 64
[    0.172221] Unpacking initramfs...
[    0.663818] Freeing initrd memory: 48472K
[    0.663831] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.663833] software IO TLB [mem 0xb9a35000-0xbda35000] (64MB) mapped at [ffff92d0b9a35000-ffff92d0bda34fff]
[    0.664070] Scanning for low memory corruption every 60 seconds
[    0.664277] audit: initializing netlink subsys (disabled)
[    0.664306] audit: type=2000 audit(1525077556.664:1): state=initialized audit_enabled=0 res=1
[    0.664539] Initialise system trusted keyrings
[    0.664545] Key type blacklist registered
[    0.664567] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.665277] zbud: loaded
[    0.665588] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.665670] fuse init (API version 7.26)
[    0.666487] Key type asymmetric registered
[    0.666488] Asymmetric key parser 'x509' registered
[    0.666507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.666529] io scheduler noop registered
[    0.666529] io scheduler deadline registered
[    0.666543] io scheduler cfq registered (default)
[    0.666993] intel_idle: MWAIT substates: 0x42120
[    0.666994] intel_idle: v0.4.1 model 0x3C
[    0.667173] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.667252] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.667259] ACPI: Power Button [PWRB]
[    0.667280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.667295] ACPI: Power Button [PWRF]
[    0.667728] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.667819] thermal LNXTHERM:00: registered as thermal_zone0
[    0.667819] ACPI: Thermal Zone [TZ00] (28 C)
[    0.667959] thermal LNXTHERM:01: registered as thermal_zone1
[    0.667959] ACPI: Thermal Zone [TZ01] (30 C)
[    0.667997] GHES: HEST is not enabled!
[    0.668054] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.688493] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.689319] Linux agpgart interface v0.103
[    0.690509] loop: module loaded
[    0.690604] libphy: Fixed MDIO Bus: probed
[    0.690605] tun: Universal TUN/TAP device driver, 1.6
[    0.690622] PPP generic driver version 2.4.2
[    0.690646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.690647] ehci-pci: EHCI PCI platform driver
[    0.690717] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.690720] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.690729] ehci-pci 0000:00:1a.0: debug port 2
[    0.694622] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.694630] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf237000
[    0.708031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.708054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.708055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.708056] usb usb1: Product: EHCI Host Controller
[    0.708057] usb usb1: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.708057] usb usb1: SerialNumber: 0000:00:1a.0
[    0.708201] hub 1-0:1.0: USB hub found
[    0.708204] hub 1-0:1.0: 2 ports detected
[    0.708335] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.708338] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.708346] ehci-pci 0000:00:1d.0: debug port 2
[    0.712231] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.712237] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf236000
[    0.728050] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.728073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.728074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728075] usb usb2: Product: EHCI Host Controller
[    0.728076] usb usb2: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.728077] usb usb2: SerialNumber: 0000:00:1d.0
[    0.728219] hub 2-0:1.0: USB hub found
[    0.728222] hub 2-0:1.0: 2 ports detected
[    0.728291] ehci-platform: EHCI generic platform driver
[    0.728297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.728299] ohci-pci: OHCI PCI platform driver
[    0.728303] ohci-platform: OHCI generic platform driver
[    0.728307] uhci_hcd: USB Universal Host Controller Interface driver
[    0.728383] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.728385] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.729447] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.729450] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.729499] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.729500] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.729501] usb usb3: Product: xHCI Host Controller
[    0.729502] usb usb3: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.729503] usb usb3: SerialNumber: 0000:00:14.0
[    0.729640] hub 3-0:1.0: USB hub found
[    0.729654] hub 3-0:1.0: 14 ports detected
[    0.729996] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.729998] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.730021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.730022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

et

$ dmesg | head -1200 | tail -600
[    0.105118] SCSI subsystem initialized
[    0.105129] libata version 3.00 loaded.
[    0.105129] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.105129] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.105129] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.105129] vgaarb: loaded
[    0.105129] ACPI: bus type USB registered
[    0.105129] usbcore: registered new interface driver usbfs
[    0.105129] usbcore: registered new interface driver hub
[    0.105129] usbcore: registered new device driver usb
[    0.105129] EDAC MC: Ver: 3.0.0
[    0.105129] PCI: Using ACPI for IRQ routing
[    0.110381] PCI: pci_cache_line_size set to 64 bytes
[    0.110417] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.110417] e820: reserve RAM buffer [mem 0xabf43000-0xabffffff]
[    0.110418] e820: reserve RAM buffer [mem 0xac3aa000-0xafffffff]
[    0.110419] e820: reserve RAM buffer [mem 0xbda35000-0xbfffffff]
[    0.110420] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    0.110420] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[    0.110472] NetLabel: Initializing
[    0.110472] NetLabel:  domain hash size = 128
[    0.110472] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.110481] NetLabel:  unlabeled traffic allowed by default
[    0.110491] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.110491] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.112012] clocksource: Switched to clocksource hpet
[    0.118634] VFS: Disk quotas dquot_6.6.0
[    0.118646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.118712] AppArmor: AppArmor Filesystem Enabled
[    0.118738] pnp: PnP ACPI init
[    0.118817] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.118819] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.118883] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.118885] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.118898] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.118920] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.118922] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.118989] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.118990] system 00:04: [io  0x02a0-0x02af] has been reserved
[    0.118991] system 00:04: [io  0x0a00-0x0aff] has been reserved
[    0.118993] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119025] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.119027] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119179] pnp 00:06: [dma 0 disabled]
[    0.119209] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.119415] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.119416] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.119417] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.119418] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.119419] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.119420] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.119421] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.119422] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.119423] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.119424] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.119426] system 00:07: [mem 0xdffe0000-0xdffeffff] has been reserved
[    0.119427] system 00:07: [mem 0xdfff0000-0xdfffffff] has been reserved
[    0.119428] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119541] pnp: PnP ACPI: found 8 devices
[    0.125129] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.125163] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.125168] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.125169] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.125171] pci 0000:00:01.1:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.125173] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.125175] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.125183] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.125198] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.125206] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.125209] pci 0000:00:1c.6:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.125215] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.125216] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.125217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.125218] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.125218] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.125219] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.125220] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.125221] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.125222] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.125223] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfeafffff window]
[    0.125224] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.125225] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.125226] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.125227] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.125228] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.125229] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.125230] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.125231] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.125232] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.125233] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.125234] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.125235] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.125236] pci_bus 0000:04: resource 13 [mem 0xc0000000-0xfeafffff window]
[    0.125237] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.125237] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.125238] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.125239] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.125240] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.125241] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.125242] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.125243] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.125244] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.125245] pci_bus 0000:05: resource 13 [mem 0xc0000000-0xfeafffff window]
[    0.125246] pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.125317] NET: Registered protocol family 2
[    0.125428] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.125564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.125658] TCP: Hash tables configured (established 131072 bind 65536)
[    0.125685] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.125717] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.125767] NET: Registered protocol family 1
[    0.172086] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.172196] PCI: CLS 64 bytes, default 64
[    0.172221] Unpacking initramfs...
[    0.663818] Freeing initrd memory: 48472K
[    0.663831] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.663833] software IO TLB [mem 0xb9a35000-0xbda35000] (64MB) mapped at [ffff92d0b9a35000-ffff92d0bda34fff]
[    0.664070] Scanning for low memory corruption every 60 seconds
[    0.664277] audit: initializing netlink subsys (disabled)
[    0.664306] audit: type=2000 audit(1525077556.664:1): state=initialized audit_enabled=0 res=1
[    0.664539] Initialise system trusted keyrings
[    0.664545] Key type blacklist registered
[    0.664567] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.665277] zbud: loaded
[    0.665588] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.665670] fuse init (API version 7.26)
[    0.666487] Key type asymmetric registered
[    0.666488] Asymmetric key parser 'x509' registered
[    0.666507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.666529] io scheduler noop registered
[    0.666529] io scheduler deadline registered
[    0.666543] io scheduler cfq registered (default)
[    0.666993] intel_idle: MWAIT substates: 0x42120
[    0.666994] intel_idle: v0.4.1 model 0x3C
[    0.667173] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.667252] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.667259] ACPI: Power Button [PWRB]
[    0.667280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.667295] ACPI: Power Button [PWRF]
[    0.667728] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.667819] thermal LNXTHERM:00: registered as thermal_zone0
[    0.667819] ACPI: Thermal Zone [TZ00] (28 C)
[    0.667959] thermal LNXTHERM:01: registered as thermal_zone1
[    0.667959] ACPI: Thermal Zone [TZ01] (30 C)
[    0.667997] GHES: HEST is not enabled!
[    0.668054] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.688493] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.689319] Linux agpgart interface v0.103
[    0.690509] loop: module loaded
[    0.690604] libphy: Fixed MDIO Bus: probed
[    0.690605] tun: Universal TUN/TAP device driver, 1.6
[    0.690622] PPP generic driver version 2.4.2
[    0.690646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.690647] ehci-pci: EHCI PCI platform driver
[    0.690717] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.690720] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.690729] ehci-pci 0000:00:1a.0: debug port 2
[    0.694622] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.694630] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf237000
[    0.708031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.708054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.708055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.708056] usb usb1: Product: EHCI Host Controller
[    0.708057] usb usb1: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.708057] usb usb1: SerialNumber: 0000:00:1a.0
[    0.708201] hub 1-0:1.0: USB hub found
[    0.708204] hub 1-0:1.0: 2 ports detected
[    0.708335] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.708338] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.708346] ehci-pci 0000:00:1d.0: debug port 2
[    0.712231] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.712237] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf236000
[    0.728050] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.728073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.728074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728075] usb usb2: Product: EHCI Host Controller
[    0.728076] usb usb2: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.728077] usb usb2: SerialNumber: 0000:00:1d.0
[    0.728219] hub 2-0:1.0: USB hub found
[    0.728222] hub 2-0:1.0: 2 ports detected
[    0.728291] ehci-platform: EHCI generic platform driver
[    0.728297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.728299] ohci-pci: OHCI PCI platform driver
[    0.728303] ohci-platform: OHCI generic platform driver
[    0.728307] uhci_hcd: USB Universal Host Controller Interface driver
[    0.728383] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.728385] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.729447] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.729450] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.729499] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.729500] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.729501] usb usb3: Product: xHCI Host Controller
[    0.729502] usb usb3: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.729503] usb usb3: SerialNumber: 0000:00:14.0
[    0.729640] hub 3-0:1.0: USB hub found
[    0.729654] hub 3-0:1.0: 14 ports detected
[    0.729996] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.729998] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.730021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.730022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.730023] usb usb4: Product: xHCI Host Controller
[    0.730024] usb usb4: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.730025] usb usb4: SerialNumber: 0000:00:14.0
[    0.730162] hub 4-0:1.0: USB hub found
[    0.730171] hub 4-0:1.0: 6 ports detected
[    0.730482] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.730485] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    0.730576] xhci_hcd 0000:06:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[    0.730639] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.730640] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.730641] usb usb5: Product: xHCI Host Controller
[    0.730642] usb usb5: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.730643] usb usb5: SerialNumber: 0000:06:00.0
[    0.730774] hub 5-0:1.0: USB hub found
[    0.730778] hub 5-0:1.0: 1 port detected
[    0.730812] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.730814] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    0.730825] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.730838] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    0.730839] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.730840] usb usb6: Product: xHCI Host Controller
[    0.730841] usb usb6: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.730841] usb usb6: SerialNumber: 0000:06:00.0
[    0.730973] hub 6-0:1.0: USB hub found
[    0.730980] hub 6-0:1.0: 4 ports detected
[    0.731059] i8042: PNP: No PS/2 controller found.
[    0.731131] mousedev: PS/2 mouse device common for all mice
[    0.731258] rtc_cmos 00:02: RTC can wake from S4
[    0.731362] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.731383] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.731386] i2c /dev entries driver
[    0.731410] device-mapper: uevent: version 1.0.3
[    0.731456] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.731459] intel_pstate: Intel P-state driver initializing
[    0.731758] ledtrig-cpu: registered to indicate activity on CPUs
[    0.731996] NET: Registered protocol family 10
[    0.734686] Segment Routing with IPv6
[    0.734706] NET: Registered protocol family 17
[    0.734710] Key type dns_resolver registered
[    0.735093] RAS: Correctable Errors collector initialized.
[    0.735117] microcode: sig=0x306c3, pf=0x2, revision=0x24
[    0.735242] microcode: Microcode Update Driver: v2.2.
[    0.735325] sched_clock: Marking stable (735238681, 0)->(751929397, -16690716)
[    0.735456] registered taskstats version 1
[    0.735462] Loading compiled-in X.509 certificates
[    0.737066] Loaded X.509 cert 'Build time autogenerated kernel key: 4f0e518fe6e203292fbf35df5fac675bae7fc15a'
[    0.737078] zswap: loaded using pool lzo/zbud
[    0.739263] Key type big_key registered
[    0.739266] Key type trusted registered
[    0.740399] Key type encrypted registered
[    0.740401] AppArmor: AppArmor sha1 policy hashing enabled
[    0.740403] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.740414] evm: HMAC attrs: 0x1
[    0.740720]   Magic number: 14:222:676
[    0.740812] rtc_cmos 00:02: setting system clock to 2018-04-30 08:39:17 UTC (1525077557)
[    0.740849] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.740858] EDD information not available.
[    0.740893] PM: Hibernation image not present or could not be loaded.
[    0.742344] Freeing unused kernel memory: 2376K
[    0.742344] Write protecting the kernel read-only data: 18432k
[    0.742739] Freeing unused kernel memory: 2024K
[    0.742908] Freeing unused kernel memory: 96K
[    0.743889] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.743889] x86/mm: Checking user space page tables
[    0.744797] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.801971] pps_core: LinuxPPS API ver. 1 registered
[    0.801973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.802983] PTP clock support registered
[    0.805073] ahci 0000:00:1f.2: version 3.0
[    0.805257] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2b impl SATA mode
[    0.805260] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.806570] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.806571] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.844681] scsi host0: ahci
[    0.844820] scsi host1: ahci
[    0.844943] scsi host2: ahci
[    0.845034] scsi host3: ahci
[    0.845108] scsi host4: ahci
[    0.845181] scsi host5: ahci
[    0.845205] ata1: SATA max UDMA/133 abar m2048@0xdf235000 port 0xdf235100 irq 26
[    0.845207] ata2: SATA max UDMA/133 abar m2048@0xdf235000 port 0xdf235180 irq 26
[    0.845207] ata3: DUMMY
[    0.845208] ata4: SATA max UDMA/133 abar m2048@0xdf235000 port 0xdf235280 irq 26
[    0.845209] ata5: DUMMY
[    0.845210] ata6: SATA max UDMA/133 abar m2048@0xdf235000 port 0xdf235380 irq 26
[    0.845358] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.916958] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    0.952311] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[    0.985666] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:c3:7b:6b:8a:40
[    0.985667] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.985695] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    0.986192] e1000e 0000:00:19.0 eno1: renamed from eth0
[    1.036023] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.056020] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    1.056025] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.158960] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.158977] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.158989] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.159727] ata2.00: ATA-8: TOSHIBA HDWD105, MS1OA8J0, max UDMA/133
[    1.159729] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.159932] ata1.00: ATA-9: TS64GSSD370S, P1225CE, max UDMA/133
[    1.159933] ata1.00: 125045424 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[    1.160091] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.160149] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.160207] ata6.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[    1.160564] ata2.00: configured for UDMA/133
[    1.160651] ata1.00: configured for UDMA/133
[    1.160765] scsi 0:0:0:0: Direct-Access     ATA      TS64GSSD370S     5CE  PQ: 0 ANSI: 5
[    1.161521] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.161574] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.161631] ata6.00: configured for UDMA/133
[    1.184420] usb 1-1: New USB device found, idVendor=8087, idProduct=8009
[    1.184422] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.184661] hub 1-1:1.0: USB hub found
[    1.184765] hub 1-1:1.0: 6 ports detected
[    1.192130] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.192221] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.192262] sd 0:0:0:0: [sda] Write Protect is off
[    1.192263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.192282] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA HDWD105  A8J0 PQ: 0 ANSI: 5
[    1.192298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.192903]  sda: sda1
[    1.193255] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.200773] usb 3-3: New USB device found, idVendor=0a5c, idProduct=4500
[    1.200775] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.200776] usb 3-3: Product: BCM2046B1
[    1.200776] usb 3-3: Manufacturer: Broadcom
[    1.201030] hub 3-3:1.0: USB hub found
[    1.201116] hub 3-3:1.0: 3 ports detected
[    1.204672] usb 6-1: New USB device found, idVendor=2109, idProduct=0812
[    1.204683] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.204684] usb 6-1: Product: USB3.0 Hub             
[    1.204685] usb 6-1: Manufacturer: VIA Labs, Inc.         
[    1.205182] hub 6-1:1.0: USB hub found
[    1.205308] hub 6-1:1.0: 4 ports detected
[    1.208414] usb 2-1: New USB device found, idVendor=8087, idProduct=8001
[    1.208415] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.208670] hub 2-1:1.0: USB hub found
[    1.208769] hub 2-1:1.0: 8 ports detected
[    1.224104] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.224173] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.224175] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.224192] sd 1:0:0:0: [sdb] Write Protect is off
[    1.224193] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.224279] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.276013] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.284905]  sdb: sdb1 sdb2
[    1.285647] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.319992] usb 3-7: new high-speed USB device number 3 using xhci_hcd
[    1.319996] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    1.462159] usb 5-1: New USB device found, idVendor=2109, idProduct=3431
[    1.462161] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.462162] usb 5-1: Product: USB2.0 Hub
[    1.462734] hub 5-1:1.0: USB hub found
[    1.463034] hub 5-1:1.0: 4 ports detected
[    1.475347] usb 3-7: New USB device found, idVendor=05e3, idProduct=0745
[    1.475348] usb 3-7: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[    1.475349] usb 3-7: Product: USB Storage
[    1.475350] usb 3-7: SerialNumber: 000000000903
[    1.551993] usb 3-3.1: new full-speed USB device number 4 using xhci_hcd
[    1.608476] ata4.00: ATA-7: TOSHIBA MK6037GSX, DL330G, max UDMA/100
[    1.608477] ata4.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.609487] ata4.00: configured for UDMA/100
[    1.609657] scsi 3:0:0:0: Direct-Access     ATA      TOSHIBA MK6037GS 0G   PQ: 0 ANSI: 5
[    1.640072] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.640143] sd 3:0:0:0: [sdc] 117210240 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    1.640172] sd 3:0:0:0: [sdc] Write Protect is off
[    1.640173] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.640238] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.640865] scsi 5:0:0:0: CD-ROM            ASUS     DRW-24D5MT       1.00 PQ: 0 ANSI: 5
[    1.654317] usb 3-3.1: New USB device found, idVendor=0a5c, idProduct=4502
[    1.654319] usb 3-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.666952] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.666953] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.667047]  sdc: sdc1
[    1.667060] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.667109] sr 5:0:0:0: Attached scsi generic sg3 type 5
[    1.667545] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.692119] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[    1.692126] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[    1.755981] usb 5-1.1: new high-speed USB device number 3 using xhci_hcd
[    1.771979] usb 3-10: new high-speed USB device number 5 using xhci_hcd
[    1.857692] usb 5-1.1: New USB device found, idVendor=2109, idProduct=2812
[    1.857693] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.857695] usb 5-1.1: Product: USB2.0 Hub             
[    1.857695] usb 5-1.1: Manufacturer: VIA Labs, Inc.         
[    1.858271] hub 5-1.1:1.0: USB hub found
[    1.858649] hub 5-1.1:1.0: 4 ports detected
[    1.912252] usb 3-10: New USB device found, idVendor=058f, idProduct=6254
[    1.912253] usb 3-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.912254] usb 3-10: Product: USB2.0Hub
[    1.912588] hub 3-10:1.0: USB hub found
[    1.912663] hub 3-10:1.0: 4 ports detected
[    1.995977] usb 3-3.2: new full-speed USB device number 6 using xhci_hcd
[    2.098246] usb 3-3.2: New USB device found, idVendor=0a5c, idProduct=4503
[    2.098247] usb 3-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.215981] usb 3-13: new full-speed USB device number 7 using xhci_hcd
[    2.357819] usb 3-13: New USB device found, idVendor=062a, idProduct=5918
[    2.357820] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.357821] usb 3-13: Product: 2.4G Keyboard Mouse
[    2.357822] usb 3-13: Manufacturer: MOSART Semi.
[    2.435981] usb 3-3.3: new full-speed USB device number 8 using xhci_hcd
[    2.539239] usb 3-3.3: New USB device found, idVendor=050d, idProduct=0017
[    2.539240] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.539241] usb 3-3.3: Product: BLUETOOTH USB +EDR ADAPTER Class 1 v2.1 UHE
[    2.539242] usb 3-3.3: Manufacturer: Broadcom Corp
[    2.539243] usb 3-3.3: SerialNumber: 00190E0AE5E9
[    2.615981] usb 3-10.1: new full-speed USB device number 9 using xhci_hcd
[    2.716079] clocksource: Switched to clocksource tsc
[    2.717194] usb 3-10.1: New USB device found, idVendor=256c, idProduct=006e
[    2.717195] usb 3-10.1: New USB device strings: Mfr=5, Product=6, SerialNumber=0
[    2.717196] usb 3-10.1: Product: PenTablet
[    2.717197] usb 3-10.1: Manufacturer: HUION
[    2.835982] usb 3-14: new low-speed USB device number 10 using xhci_hcd
[    2.981093] usb 3-14: New USB device found, idVendor=1a2c, idProduct=2124
[    2.981095] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.981096] usb 3-14: Product: USB Keyboard
[    2.981096] usb 3-14: Manufacturer: SEM
[    2.984780] usb-storage 3-7:1.0: USB Mass Storage device detected
[    2.984979] hidraw: raw HID events driver (C) Jiri Kosina
[    2.986785] scsi host6: usb-storage 3-7:1.0
[    2.986871] usbcore: registered new interface driver usb-storage
[    2.987690] usbcore: registered new interface driver uas
[    2.998947] usbcore: registered new interface driver usbhid
[    2.998947] usbhid: USB HID core driver
[    3.000499] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/0003:0A5C:4502.0001/input/input2
[    3.059981] usb 3-10.4: new high-speed USB device number 11 using xhci_hcd
[    3.060137] hid-generic 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:14.0-3.1/input0
[    3.060223] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:0A5C:4503.0002/input/input3
[    3.060346] hid-generic 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:14.0-3.2/input0
[    3.060424] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:062A:5918.0003/input/input4
[    3.120091] hid-generic 0003:062A:5918.0003: input,hidraw2: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-13/input0
[    3.120246] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:062A:5918.0004/input/input5
[    3.161848] usb 3-10.4: New USB device found, idVendor=058f, idProduct=6366
[    3.161849] usb 3-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.161850] usb 3-10.4: Product: Mass Storage Device
[    3.161851] usb 3-10.4: Manufacturer: Generic
[    3.161852] usb 3-10.4: SerialNumber: 058F0O1111B1
[    3.162433] usb-storage 3-10.4:1.0: USB Mass Storage device detected
[    3.162624] scsi host7: usb-storage 3-10.4:1.0
[    3.180165] hid-generic 0003:062A:5918.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-13/input1
[    3.180237] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1A2C:2124.0008/input/input6
[    3.240110] hid-generic 0003:1A2C:2124.0008: input,hidraw4: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-14/input0
[    3.240206] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:1A2C:2124.0009/input/input7
[    3.300001] hid-generic 0003:1A2C:2124.0009: input,hidraw5: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-14/input1
[    3.997254] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[    3.997466] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    3.999585] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    4.188630] scsi 7:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
[    4.188859] sd 7:0:0:0: Attached scsi generic sg5 type 0
[    4.189734] sd 7:0:0:0: [sde] Attached SCSI removable disk
[   35.263713] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   35.496504] random: crng init done
[   37.694867] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.834566] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   37.852217] systemd[1]: Detected architecture x86-64.
[   37.864557] systemd[1]: Set hostname to <pymubuntu-All-Series>.
[   41.383993] systemd[1]: Created slice User and Session Slice.
[   41.384041] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   41.384128] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   41.384204] systemd[1]: Created slice System Slice.
[   41.384253] systemd[1]: Listening on Syslog Socket.
[   41.384278] systemd[1]: Listening on udev Kernel Socket.
[   41.384307] systemd[1]: Listening on fsck to fsckd communication Socket.
[   42.182719] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[   42.327206] lp: driver loaded but no devices found
[   42.405916] ppdev: user-space parallel port driver
[   42.898774] RPC: Registered named UNIX socket transport module.
[   42.898774] RPC: Registered udp transport module.
[   42.898775] RPC: Registered tcp transport module.
[   42.898775] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   43.640890] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   49.780322] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   49.780373] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247)
[   49.780378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   49.780380] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   49.780384] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170531/utaddress-247)
[   49.780386] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   49.780387] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[   49.780390] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   49.780393] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170531/utaddress-247)
[   49.780396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   49.780396] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[   49.780399] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   49.780402] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170531/utaddress-247)
[   49.780405] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   49.780405] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   49.786750] ipmi message handler version 39.2
[   49.787784] ipmi device interface
[   49.808753] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   49.808754] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   49.808755] RAPL PMU: hw unit of domain package 2^-14 Joules
[   49.808755] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   49.808755] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   49.815991] AVX2 version of gcm_enc/dec engaged.
[   49.815992] AES CTR mode by8 optimization enabled
[   49.844967] intel_rapl: Found RAPL domain package
[   49.844969] intel_rapl: Found RAPL domain core
[   49.844970] intel_rapl: Found RAPL domain dram
[   50.081312] Bluetooth: Core ver 2.22
[   50.081323] NET: Registered protocol family 31
[   50.081323] Bluetooth: HCI device and connection manager initialized
[   50.081325] Bluetooth: HCI socket layer initialized
[   50.081327] Bluetooth: L2CAP socket layer initialized
[   50.081331] Bluetooth: SCO socket layer initialized
[   50.086179] usbcore: registered new interface driver btusb
[   50.357687] snd_hda_intel 0000:02:00.1: Disabling MSI
[   50.357690] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[   50.369452] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   50.369453] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   50.369454] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   50.369455] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   50.369456] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   50.369456] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   50.369458] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   50.369459] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   50.369459] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   50.381234] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   50.381262] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   50.381287] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   50.381311] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   50.381337] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   50.381361] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   50.381385] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   50.446459] asus_wmi: ASUS WMI generic driver loaded
[   50.447380] asus_wmi: Initialization: 0x0
[   50.447403] asus_wmi: BIOS WMI version: 0.9
[   50.447436] asus_wmi: SFUN value: 0x0
[   50.447753] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
[   50.447819] asus_wmi: Number of fans: 1
[   51.112376] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input16
[   51.112408] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input17
[   51.112437] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input18
[   51.112465] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input19
[   52.028337] nvidia: loading out-of-tree module taints kernel.
[   52.028340] nvidia: module license 'NVIDIA' taints kernel.
[   52.028350] Disabling lock debugging due to kernel taint
[   52.031618] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   52.037280] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[   52.037498] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   52.037547] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.48  Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[   52.054652] input: HUION PenTablet Pen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.0/0003:256C:006E.0005/input/input20
[   52.054715] input: HUION PenTablet Pad as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.0/0003:256C:006E.0005/input/input21
[   52.054751] uclogic 0003:256C:006E.0005: input,hidraw6: USB HID v1.11 Keypad [HUION PenTablet] on usb-0000:00:14.0-10.1/input0
[   52.054887] input: HUION PenTablet Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.1/0003:256C:006E.0006/input/input22
[   52.054953] uclogic 0003:256C:006E.0006: input,hiddev1,hidraw7: USB HID v1.11 Mouse [HUION PenTablet] on usb-0000:00:14.0-10.1/input1
[   52.055082] input: HUION PenTablet Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.2/0003:256C:006E.0007/input/input24
[   52.112057] input: HUION PenTablet Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.2/0003:256C:006E.0007/input/input25
[   52.112096] input: HUION PenTablet System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.2/0003:256C:006E.0007/input/input26
[   52.112134] uclogic 0003:256C:006E.0007: input,hidraw8: USB HID v1.11 Keyboard [HUION PenTablet] on usb-0000:00:14.0-10.1/input2
[   52.174974] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.48  Wed Mar 21 23:48:34 PDT 2018
[   52.175856] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[   52.175857] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0
[   52.179430] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
[   54.519826] systemd-journald[362]: Received request to flush runtime journal from PID 1
[   54.593723] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   54.814828] audit: type=1400 audit(1525077611.574:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1041 comm="apparmor_parser"
[   54.814861] audit: type=1400 audit(1525077611.574:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=1034 comm="apparmor_parser"
[   54.814863] audit: type=1400 audit(1525077611.574:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1034 comm="apparmor_parser"
[   54.814882] audit: type=1400 audit(1525077611.574:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1038 comm="apparmor_parser"
[   54.815183] audit: type=1400 audit(1525077611.574:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1037 comm="apparmor_parser"
[   54.815186] audit: type=1400 audit(1525077611.574:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1037 comm="apparmor_parser"
[   54.815188] audit: type=1400 audit(1525077611.574:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1037 comm="apparmor_parser"
[   54.815843] audit: type=1400 audit(1525077611.575:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1043 comm="apparmor_parser"
[   54.816061] audit: type=1400 audit(1525077611.575:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1045 comm="apparmor_parser"
[   54.816316] audit: type=1400 audit(1525077611.575:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1042 comm="apparmor_parser"
[   67.853764] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   67.853765] Bluetooth: BNEP filters: protocol multicast
[   67.853768] Bluetooth: BNEP socket layer initialized
[   69.747221] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   69.932099] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   70.748288] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   70.873744] NFSD: starting 90-second grace period (net ffffffffb69edd80)
[   75.996390] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   75.996421] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   76.001135] FS-Cache: Loaded
[   76.006274] FS-Cache: Netfs 'nfs' registered for caching
[   76.013891] NFS: Registering the id_resolver key type
[   76.013895] Key type id_resolver registered
[   76.013896] Key type id_legacy registered
[   89.887750] nvidia-modeset: Allocated GPU:0 (GPU-82c8f2c1-62d7-aa79-b149-c731d90f1145) @ PCI:0000:02:00.0
[  108.543973] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
[  113.918254] Bluetooth: RFCOMM TTY layer initialized
[  113.918257] Bluetooth: RFCOMM socket layer initialized
[  113.918260] Bluetooth: RFCOMM ver 1.11
[  134.727858] rfkill: input handler disabled
[  428.397828] systemd: 24 output lines suppressed due to ratelimiting
[  428.401363] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  428.420811] systemd[1]: Detected architecture x86-64.
[  428.570661] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  428.570852] systemd[1]: Detected architecture x86-64.
[  428.614387] systemd[1]: Started ACPI event daemon.
[  428.745734] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  428.746078] systemd[1]: Detected architecture x86-64.
[  428.789555] systemd[1]: Started ACPI event daemon.
[  428.789680] systemd[1]: Started CUPS Scheduler.
[  428.909540] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  428.909822] systemd[1]: Detected architecture x86-64.
[  428.952949] systemd[1]: Started CUPS Scheduler.
[  429.077528] systemd[1]: Started CUPS Scheduler.

Sinon à quoi sert ces commandes. Je sais pour dsmeg (affichage) mais pourquoi ?

merci d'éclairer ma lanterne

Pympc · Le 04/05/2018, à 16:45

Pour infos, aujourd'hui cela refonctionne... Allez y comprendre quelque chose !

A noter que j'ai mis une ligne avec cifs et les autres avec nfs, histoire de voir si ce sont les deux type de protocole qui débloquent ou un seul des deux.

Pympc · Le 24/06/2018, à 11:17

Je laisse tombé NFS, trop long dans les échanges entre mon NAS et mes PC surtout pour des grosses quantités de données (photos, vidéos...)

J'ai tout basculé sur cifs et je ne regrette pas pour le moment.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 04/04/2018, à 15:35

[ABANDON] NFS non pris en charge au démarrage

#2 Le 04/04/2018, à 15:46

Re : [ABANDON] NFS non pris en charge au démarrage

#3 Le 30/04/2018, à 10:00

Re : [ABANDON] NFS non pris en charge au démarrage

#4 Le 04/05/2018, à 16:45

Re : [ABANDON] NFS non pris en charge au démarrage

#5 Le 24/06/2018, à 11:17

Re : [ABANDON] NFS non pris en charge au démarrage

Pied de page des forums