#1 Le 08/03/2018, à 16:09
- luciolz
Bios et lancement ubuntu lent [RESOLU]
Bonjour,
J'ai monté mon ordinateur l'été dernier, carte mère asrock h110M itx/ac, processeur I3-6100, mémoire vive 4Go, SSD pour le système (Ubuntu 16) et un DD classique pour le stockage. Montage et installation sans soucis. Le tout démarré en 30 ou 40 sec (j'ai pas chronométré mais très rapide).
Mais soucis il y a quelques jours j'ai constaté un gros ralentissement (chronométré cette fois) plus de 3minutes avant qu'Ubuntu soit opérationnel. J'ai suivi plusieurs pistes trouvées sur divers forum mais sans succès, je me suis donc résolu à tout réinstaller (clear cmos, puis remise à jour du bios, réinstallation de Ubuntu sur le ssd) mais aucun changement.
J'ai donc suspecté que le soucis venait de mon SSD j'ai donc installé Ubuntu sur mon DD pour toujours aucune amélioration (essais fait avec Ubuntu 16 puis 14).
J'ai fait un boot info:
http://paste.ubuntu.com/p/n/79dSbw5vn/
J'ai également eu un message d'erreur après une installation de type:
ACPI error:....namespace lookup failure.....
ACPI exception:....during name
(bien que je ne sois pas sur que se soit lié)
Dernière modification par luciolz (Le 31/03/2018, à 17:24)
Hors ligne
#2 Le 08/03/2018, à 16:31
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Voici le message en question complet:
[0.018684] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespacelookup failure, AE_NOT_FOUND (20170531/dswload-210)
[0.018763] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
[0.018853] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170531/tbxf load-228)
[0.023960] ACPI Error: 1 tableload failures, 5 succesful (20170531/tbxfload-246)
BusyBox v1.22.1 (Ubuntu 1:1.22.0-15ubuntu1) built-in shell (ash)
(initramfs) Unable to find a medium containing a live file system
[70.143103] sd 4:0:0:0: [sdb] No Caching mode page found
[70.143128] sd 4:0:0:0: [sdb] Assuming drive cache: write through
Hors ligne
#3 Le 08/03/2018, à 18:21
- malbo
Re : Bios et lancement ubuntu lent [RESOLU]
J'ai rectifié le lien vers ton Boot-Info ( http://paste.ubuntu.com/p/n79dSbw5vn/ ) et je le colle ci-dessous :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> libparted MBR boot code is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.4 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.4 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 390,625,279 390,623,232 83 Linux
/dev/sda2 390,627,326 468,860,927 78,233,602 5 Extended
/dev/sda5 390,627,328 468,860,927 78,233,600 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 969,021,439 969,019,392 83 Linux
/dev/sdb2 969,023,486 976,771,071 7,747,586 5 Extended
/dev/sdb5 969,023,488 976,771,071 7,747,584 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 60c74b62-b215-440f-9e63-8f459b915d3e ext4
/dev/sda5 049f1b54-88d6-4cf1-95a3-7215dc5ce7bf swap
/dev/sdb1 1e953163-6a14-4915-9baf-f870275bedaf ext4
/dev/sdb5 bc599d4a-4d6f-465e-b4a9-6884c9c76ceb swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Mar 8 14:25 ata-KINGSTON_SUV400S37240G_50026B77740161D4 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 8 14:25 ata-KINGSTON_SUV400S37240G_50026B77740161D4-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 8 14:25 ata-KINGSTON_SUV400S37240G_50026B77740161D4-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 8 14:25 ata-KINGSTON_SUV400S37240G_50026B77740161D4-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Mar 8 14:25 ata-ST500DM002-1BD142_W3T3ZSPT -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 8 14:25 ata-ST500DM002-1BD142_W3T3ZSPT-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Mar 8 14:25 ata-ST500DM002-1BD142_W3T3ZSPT-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Mar 8 14:25 ata-ST500DM002-1BD142_W3T3ZSPT-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 9 Mar 8 14:25 wwn-0x5000c50072d5f282 -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 8 14:25 wwn-0x5000c50072d5f282-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Mar 8 14:25 wwn-0x5000c50072d5f282-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Mar 8 14:25 wwn-0x5000c50072d5f282-part5 -> ../../sdb5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 60c74b62-b215-440f-9e63-8f459b915d3e
else
search --no-floppy --fs-uuid --set=root 60c74b62-b215-440f-9e63-8f459b915d3e
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-60c74b62-b215-440f-9e63-8f459b915d3e' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 60c74b62-b215-440f-9e63-8f459b915d3e
else
search --no-floppy --fs-uuid --set=root 60c74b62-b215-440f-9e63-8f459b915d3e
fi
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=60c74b62-b215-440f-9e63-8f459b915d3e ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-36-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-60c74b62-b215-440f-9e63-8f459b915d3e' {
menuentry 'Ubuntu, avec Linux 4.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-advanced-60c74b62-b215-440f-9e63-8f459b915d3e' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 60c74b62-b215-440f-9e63-8f459b915d3e
else
search --no-floppy --fs-uuid --set=root 60c74b62-b215-440f-9e63-8f459b915d3e
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=60c74b62-b215-440f-9e63-8f459b915d3e ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-init-upstart-60c74b62-b215-440f-9e63-8f459b915d3e' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 60c74b62-b215-440f-9e63-8f459b915d3e
else
search --no-floppy --fs-uuid --set=root 60c74b62-b215-440f-9e63-8f459b915d3e
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=60c74b62-b215-440f-9e63-8f459b915d3e ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-recovery-60c74b62-b215-440f-9e63-8f459b915d3e' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 60c74b62-b215-440f-9e63-8f459b915d3e
else
search --no-floppy --fs-uuid --set=root 60c74b62-b215-440f-9e63-8f459b915d3e
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=60c74b62-b215-440f-9e63-8f459b915d3e ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 60c74b62-b215-440f-9e63-8f459b915d3e
else
search --no-floppy --fs-uuid --set=root 60c74b62-b215-440f-9e63-8f459b915d3e
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 60c74b62-b215-440f-9e63-8f459b915d3e
else
search --no-floppy --fs-uuid --set=root 60c74b62-b215-440f-9e63-8f459b915d3e
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04.4 LTS (16.04) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-1e953163-6a14-4915-9baf-f870275bedaf' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-36-generic
}
submenu 'Options avancées pour Ubuntu 16.04.4 LTS (16.04) (sur /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-1e953163-6a14-4915-9baf-f870275bedaf' {
menuentry 'Ubuntu (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.13.0-36-generic--1e953163-6a14-4915-9baf-f870275bedaf' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, avec Linux 4.13.0-36-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.13.0-36-generic--1e953163-6a14-4915-9baf-f870275bedaf' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (upstart) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.13.0-36-generic--1e953163-6a14-4915-9baf-f870275bedaf' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro quiet splash $vt_handoff init=/sbin/upstart
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.13.0-36-generic-root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro recovery nomodeset-1e953163-6a14-4915-9baf-f870275bedaf' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro recovery nomodeset
initrd /boot/initrd.img-4.13.0-36-generic
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=60c74b62-b215-440f-9e63-8f459b915d3e / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=049f1b54-88d6-4cf1-95a3-7215dc5ce7bf none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
48.235683441 = 51.792670720 boot/grub/grub.cfg 1
4.136054993 = 4.441055232 boot/grub/i386-pc/core.img 1
1.363624573 = 1.464180736 boot/vmlinuz-4.13.0-36-generic 1
1.363624573 = 1.464180736 vmlinuz 1
2.039257050 = 2.189635584 boot/initrd.img-4.13.0-36-generic 2
2.039257050 = 2.189635584 initrd.img 2
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1e953163-6a14-4915-9baf-f870275bedaf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-36-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-1e953163-6a14-4915-9baf-f870275bedaf' {
menuentry 'Ubuntu, avec Linux 4.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-advanced-1e953163-6a14-4915-9baf-f870275bedaf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-init-upstart-1e953163-6a14-4915-9baf-f870275bedaf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-recovery-1e953163-6a14-4915-9baf-f870275bedaf' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=1e953163-6a14-4915-9baf-f870275bedaf ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd2,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 1e953163-6a14-4915-9baf-f870275bedaf
else
search --no-floppy --fs-uuid --set=root 1e953163-6a14-4915-9baf-f870275bedaf
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04.4 LTS (16.04) (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-116-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.4.0-116-generic
}
submenu 'Options avancées pour Ubuntu 16.04.4 LTS (16.04) (sur /dev/mapper/ubuntu--vg-root)' $menuentry_id_option 'osprober-gnulinux-advanced-f895908a-0716-4162-bae9-e2cd50d4327b' {
menuentry 'Ubuntu (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.4.0-116-generic--f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-116-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.4.0-116-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-116-generic (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.4.0-116-generic--f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-116-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.4.0-116-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-116-generic (upstart) (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.4.0-116-generic--f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-116-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
initrd /initrd.img-4.4.0-116-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-116-generic (recovery mode) (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.4.0-116-generic-root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset-f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-116-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
initrd /initrd.img-4.4.0-116-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-31-generic (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.4.0-31-generic--f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-31-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart) (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.4.0-31-generic--f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-31-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
initrd /initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode) (sur /dev/mapper/ubuntu--vg-root)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.4.0-31-generic-root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset-f895908a-0716-4162-bae9-e2cd50d4327b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 547e791c-2467-4999-9e09-a2d575654f54
else
search --no-floppy --fs-uuid --set=root 547e791c-2467-4999-9e09-a2d575654f54
fi
linux /vmlinuz-4.4.0-31-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
initrd /initrd.img-4.4.0-31-generic
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdc1 during installation
UUID=1e953163-6a14-4915-9baf-f870275bedaf / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=bc599d4a-4d6f-465e-b4a9-6884c9c76ceb none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
40.132957458 = 43.092434944 boot/grub/grub.cfg 1
172.141712189 = 184.835756032 boot/grub/i386-pc/core.img 1
1.363624573 = 1.464180736 boot/vmlinuz-4.13.0-36-generic 1
1.363624573 = 1.464180736 vmlinuz 1
1.985347748 = 2.131750912 boot/initrd.img-4.13.0-36-generic 2
1.985347748 = 2.131750912 initrd.img 2
ADDITIONAL INFORMATION :
=================== log of boot-info 20180308_1425 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
boot-info is executed in installed-session (Ubuntu 16.04.4 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=60c74b62-b215-440f-9e63-8f459b915d3e ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.4 LTS CurrentSession:linux
/dev/sdb1:Ubuntu 16.04.4 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="60c74b62-b215-440f-9e63-8f459b915d3e" TYPE="ext4" PARTUUID="b9dc3ff3-01"
/dev/sda5: UUID="049f1b54-88d6-4cf1-95a3-7215dc5ce7bf" TYPE="swap" PARTUUID="b9dc3ff3-05"
/dev/sdb1: UUID="1e953163-6a14-4915-9baf-f870275bedaf" TYPE="ext4" PARTUUID="9aadf90e-01"
/dev/sdb5: UUID="bc599d4a-4d6f-465e-b4a9-6884c9c76ceb" TYPE="swap" PARTUUID="9aadf90e-05"
2 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 févr. 28 19:41 grub.d
total 80
-rwxr-xr-x 1 root root 9791 févr. 8 15:55 00_header
-rwxr-xr-x 1 root root 6258 janv. 24 22:21 05_debian_theme
-rwxr-xr-x 1 root root 12512 févr. 8 15:55 10_linux
-rwxr-xr-x 1 root root 11082 févr. 8 15:55 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 févr. 8 15:55 30_os-prober
-rwxr-xr-x 1 root root 1418 févr. 8 15:55 30_uefi-firmware
-rwxr-xr-x 1 root root 214 févr. 8 15:55 40_custom
-rwxr-xr-x 1 root root 216 févr. 8 15:55 41_custom
-rw-r--r-- 1 root root 483 févr. 8 15:55 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 févr. 28 19:41 grub.d
total 80
-rwxr-xr-x 1 root root 9791 févr. 8 15:55 00_header
-rwxr-xr-x 1 root root 6258 janv. 24 22:21 05_debian_theme
-rwxr-xr-x 1 root root 12512 févr. 8 15:55 10_linux
-rwxr-xr-x 1 root root 11082 févr. 8 15:55 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 févr. 8 15:55 30_os-prober
-rwxr-xr-x 1 root root 1418 févr. 8 15:55 30_uefi-firmware
-rwxr-xr-x 1 root root 214 févr. 8 15:55 40_custom
-rwxr-xr-x 1 root root 216 févr. 8 15:55 41_custom
-rw-r--r-- 1 root root 483 févr. 8 15:55 README
=================== sdb1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x0000000077F58228 000042 (v01 00000000 00000000)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sdb1 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:240GB:scsi:512:4096:msdos:ATA KINGSTON SUV400S:;
1:1049kB:200GB:200GB:ext4::boot;
2:200GB:240GB:40.1GB:::;
5:200GB:240GB:40.1GB:linux-swap(v1)::;
BYT;
/dev/sdb:500GB:scsi:512:4096:msdos:ATA ST500DM002-1BD14:;
1:1049kB:496GB:496GB:ext4::;
2:496GB:500GB:3967MB:::;
5:496GB:500GB:3967MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 465,8G
sdb2 part 1K
sdb5 part swap 3,7G
sdb1 part ext4 462,1G
sda disk 223,6G
sda2 part 1K
sda5 part swap 37,3G
sda1 part ext4 186,3G
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 1 0 0 running
sdb2 1 0 0
sdb5 1 0 0
sdb1 1 0 0 /mnt/boot-sav/sdb1
sda 0 0 0 running
sda2 0 0 0
sda5 0 0 0 [SWAP]
sda1 0 0 0 /
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1836328k,nr_inodes=459082,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=372536k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=22,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14810)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=372536k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb5 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sdb2 sdb5 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.8G 0 1.8G 0% /dev
tmpfs tmpfs 364M 6.1M 358M 2% /run
/dev/sda1 ext4 184G 4.4G 170G 3% /
tmpfs tmpfs 1.8G 23M 1.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.8G 0 1.8G 0% /sys/fs/cgroup
tmpfs tmpfs 364M 96K 364M 1% /run/user/1000
/dev/sdb1 ext4 455G 4.3G 428G 1% /mnt/boot-sav/sdb1
=================== fdisk -l:
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xb9dc3ff3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 390625279 390623232 186.3G 83 Linux
/dev/sda2 390627326 468860927 78233602 37.3G 5 Extended
/dev/sda5 390627328 468860927 78233600 37.3G 82 Linux swap / Solaris
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x9aadf90e
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 969021439 969019392 462.1G 83 Linux
/dev/sdb2 969023486 976771071 7747586 3.7G 5 Extended
/dev/sdb5 969023488 976771071 7747584 3.7G 82 Linux swap / Solaris
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
User choice: Est-ce que sda (ATA KINGSTON SUV400S) est un disque amovible ? no
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA KINGSTON SUV400S) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.4 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.Pour moi, il n'y a pas d'anomalie dans ce Boot-Info concernant ton install qui se trouve sur le SSD (celle depuis laquelle tu as fait le Boot-Info). Je suppose que tu souffres d'un problème graphique mais je n'en suis pas certain. Ce qui me fait supposer cela : primo, un pb graphique, ça ne peut pas se voir dans un Boot-Info. Secondo, le pb existe que tu installes sur SSD ou sur disque dur donc ce n'est pas un pb lié à un défaut de disque.
Dernière modification par malbo (Le 08/03/2018, à 18:43)
Hors ligne
#4 Le 08/03/2018, à 18:49
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Merci pour la rectification du lien et le collage. Un problème graphique pourrai engendrer une latence du lancement du bios?
Je n'ai pas de carte graphique, mon ordinateur est branché directement sur la télé en hdmi.
Y aurai-t-il d'autre test a faire?
Hors ligne
#5 Le 08/03/2018, à 19:20
- malbo
Re : Bios et lancement ubuntu lent [RESOLU]
luciolz a écrit :
Un problème graphique pourrai engendrer une latence du lancement du bios?
Qu'est-ce qui te permet de mentionner une "latence du lancement du bios" ?
Hors ligne
#6 Le 08/03/2018, à 19:52
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Latence n'est peut être pas le mot le plus approprié mais il y a un soucis sur le temps de lancement. Même ce n'est pas catastrophique mon ordinateur met a minima 8fois plus de temps à démarrer. Après un fois lancé je n'ai pas noté de dysfonctionnement particulier mais j'aimerai comprendre et si possible corriger.
Hors ligne
#7 Le 09/03/2018, à 08:21
- malbo
Re : Bios et lancement ubuntu lent [RESOLU]
Quand tu démarres l'ordi, ça met combien de temps pour arriver au menu Grub c'est à dire le menu qui te propose :
Ubuntu
Options avancées pour Ubuntu
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
etc...
Hors ligne
#8 Le 09/03/2018, à 16:25
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Je viens de chronométrer 1min20 du démarrage au grub et 1min10 du grub à l'apparition de la souris (sans compter les 10secondes ou la validation du grub biensur).
Hors ligne
#9 Le 09/03/2018, à 17:33
- moko138
Re : Bios et lancement ubuntu lent [RESOLU]
ton boot-info a écrit :
Partition 2 does not start on physical sector boundary.
fdisk -l:
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
/dev/sda2 390627326 468860927 78233602 37.3G 5 Extended
Or, 390627326 / 2048 = 190735,999023
alors que 390627328 / 2048 donnerait 190736
et sdb :
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x9aadf90eDevice Boot Start End Sectors Size Id Type
/dev/sdb1 2048 969021439 969019392 462.1G 83 Linux
/dev/sdb2 969023486 976771071 7747586 3.7G 5 Extended
Or 969023486 / 2048 = 473155,999023
alors que
969023488 / 2048 donnerait 473156
Alignement des partitions
L'alignement des partitions consiste à faire coïncider le début des partitions avec les blocs physiques du disque. Peu important sur un disque dur (sauf les 4K), il améliore les performances et la durée de vie sur les disques électroniques.
Je ne suis pas du tout sûr que réaligner tes deux partitions étendues (et les swap qu'elles contiennent) suffirait, d'autant moins sûr que tu dis que le ralentissement est apparu subitement ou progressivement :
il y a quelques jours j'ai constaté un gros ralentissement
mais je me pose la question.
- -
En tout cas, « 1min20 du démarrage au grub », ça veut dire problème de bios (détection du matériel ?) ou problème de grub ou les deux.
Nota : il n'y a pas inflation d'aucun des 2 /boot/grub/grub.cfg
- -
Autre piste :
Les UUID sont correctes dans les fstab, mais peux-tu montrer dans chaque S.E. :
cat /proc/swaps ; echo; grep UUID /etc/initramfs-tools/conf.d/resume%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#10 Le 09/03/2018, à 18:32
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Ok donc si je suis bien quand mon ordi démarre il pédale pour trouver le début des partitions qui a priori sont mal "positionnées" et/ou pas de la "taille" dont il s'attend? Mais il y aurait également autre chose?
J'ai détecté le soucis il y a quelques jours mais je ne peux pas dire si il venu progressivement ou d'un coup vu que c'est rarement moi qui l'allume. Bien que je soupçonne que ce soit venu subitement.
J'ai fait la commande indiquée et la colle en bas, en espérant que cela fonctionne (c'est mon 1er poste et forum donc pas habitué ni certain de maîtriser les balise etc... malgré mes quelques lectures)
ciol@ciol-desktop:~$ cat /proc/swaps ; echo; grep UUID /etc/initramfs-tools/conf.d/resume
Filename Type Size Used Priority
/dev/sda5 partition 39116796 0 -1
RESUME=UUID=049f1b54-88d6-4cf1-95a3-7215dc5ce7bfHors ligne
#11 Le 09/03/2018, à 19:06
- moko138
Re : Bios et lancement ubuntu lent [RESOLU]
Pour la forme, c'est presque parfait ! 
Il manque juste le retour du prompt final ("ciol@ciol-desktop:~$ ") qui généralement (mais pas ici) donne, lui aussi, de précieuses indications.
Pour le S.E. installé dans sda, c'est bon ; et pour l'autre, le retour... ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#12 Le 09/03/2018, à 19:37
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Je mettrai le prompt final la prochaine fois. Pour l'autre S.E. (swap exchange je présume) qui doit être celui sur sdb (je présume aussi) je crains que ce soit au delà de mes compétence actuel.
C'est à dire que je ne sais pas quelle commande rentrée dans le terminal pour avoir ce résultat.
Hors ligne
#13 Le 09/03/2018, à 20:10
- moko138
Re : Bios et lancement ubuntu lent [RESOLU]
Il suffit de lancer la même commande mais depuis l'autre Système d'Exploitation (S.E.).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 09/03/2018, à 20:28
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Désolé j'ai mal présumé.
ciols@ciols-desktop:~$ cat /proc/swaps ; echo; grep UUID /etc/initramfs-tools/conf.d/resume
Filename Type Size Used Priority
/dev/sdb5 partition 3873788 0 -1
RESUME=UUID=bc599d4a-4d6f-465e-b4a9-6884c9c76ceb
ciols@ciols-desktop:~$Hors ligne
#15 Le 10/03/2018, à 00:08
- moko138
Re : Bios et lancement ubuntu lent [RESOLU]
Bon, les initramfs et /proc/swaps sont cohérents avec les fstab et blkid.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 10/03/2018, à 10:43
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Du coup je pense faire une réinstallation complète, à savoir sda=ssd=ubuntu et sdb=dd= données, espérant que cela élimine le problème d’alignement/dimensionnement des partitions. Je pense que je vais devoir passer par les tables les partions plutôt que laisser faire l'installateur automatique afin supprimer/formater mon dd (qui à actuellement un ubuntu aussi).
En revanche je ne sais pas si je fait un clear cmos et remise à jour du bios avant installation ou si je laisse tel quel? Ceci n'étant pas prévu avant quelques jours je suis preneur de tout conseils pour éviter les mêmes erreurs ou en éviter d'autres...
Hors ligne
#17 Le 16/03/2018, à 19:56
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Je donne suite.
J'ai fait une réinstallation complète Ubuntu uniquement sur mon ssd et formatage du mon HDD juste pour stockage. A priori réinstallé en uefi. Le problème est toujours présent. Les temps mesurés sont identiques. Au lancement il ne passe plus par le grub (ce qui me va très bien). Toujours une ligne d'erreur au lancement du système mais trop rapide pour que je lise.
J'ai refait un bootinfo.
http://paste.ubuntu.com/p/8J9nZJsKTb/Ainsi que l'autre commande:
ciol@ciol-desktop:~$ cat /proc/swaps ; echo; grep UUID /etc/initramfs-tools/conf.d/resume
Filename Type Size Used Priority
/dev/sda5 partition 3873788 0 -1
RESUME=UUID=13882119-6b58-42e4-8c64-6f6768a80b1e
ciol@ciol-desktop:~$Si vous avez d'autres pistes ou tests je suis preneur.
Hors ligne
#18 Le 16/03/2018, à 20:06
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.4 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 461,111,295 461,109,248 83 Linux
/dev/sda2 461,113,342 468,860,927 7,747,586 5 Extended
/dev/sda5 461,113,344 468,860,927 7,747,584 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 976,771,071 976,769,024 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ext4
/dev/sda5 13882119-6b58-42e4-8c64-6f6768a80b1e swap
/dev/sdb1 52448f4a-bc47-4323-ab21-b1d285b12613 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Mar 16 18:40 ata-KINGSTON_SUV400S37240G_50026B77740161D4 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 16 18:40 ata-KINGSTON_SUV400S37240G_50026B77740161D4-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 16 18:40 ata-KINGSTON_SUV400S37240G_50026B77740161D4-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 16 18:40 ata-KINGSTON_SUV400S37240G_50026B77740161D4-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Mar 16 18:40 ata-ST500DM002-1BD142_W3T3ZSPT -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 16 18:40 ata-ST500DM002-1BD142_W3T3ZSPT-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Mar 16 18:31 usb-Verbatim_STORE_N_GO_900067CB13279828-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 Mar 16 18:40 wwn-0x5000c50072d5f282 -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 16 18:40 wwn-0x5000c50072d5f282-part1 -> ../../sdb1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
linux /boot/vmlinuz-4.13.0-37-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-37-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
menuentry 'Ubuntu, avec Linux 4.13.0-37-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-37-generic-advanced-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
echo 'Chargement de Linux 4.13.0-37-generic…'
linux /boot/vmlinuz-4.13.0-37-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-37-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-37-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-37-generic-init-upstart-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
echo 'Chargement de Linux 4.13.0-37-generic…'
linux /boot/vmlinuz-4.13.0-37-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-37-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-37-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-37-generic-recovery-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
echo 'Chargement de Linux 4.13.0-37-generic…'
linux /boot/vmlinuz-4.13.0-37-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-37-generic
}
menuentry 'Ubuntu, avec Linux 4.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-advanced-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-init-upstart-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-36-generic-recovery-a1e66182-3aa6-47ac-a5cf-33d2b0538ab3' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
echo 'Chargement de Linux 4.13.0-36-generic…'
linux /boot/vmlinuz-4.13.0-36-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-36-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
else
search --no-floppy --fs-uuid --set=root a1e66182-3aa6-47ac-a5cf-33d2b0538ab3
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=13882119-6b58-42e4-8c64-6f6768a80b1e none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
54.173175812 = 58.168004608 boot/grub/grub.cfg 1
32.130252838 = 34.499596288 boot/grub/i386-pc/core.img 1
1.430030823 = 1.535483904 boot/vmlinuz-4.13.0-36-generic 1
2.258155823 = 2.424676352 boot/vmlinuz-4.13.0-37-generic 1
2.258155823 = 2.424676352 vmlinuz 1
1.430030823 = 1.535483904 vmlinuz.old 1
32.398506165 = 34.787631104 boot/initrd.img-4.13.0-36-generic 1
32.765499115 = 35.181686784 boot/initrd.img-4.13.0-37-generic 2
32.765499115 = 35.181686784 initrd.img 2
32.398506165 = 34.787631104 initrd.img.old 1
========= Devices which don't seem to have a corresponding hard drive: =========
sdc
ADDITIONAL INFORMATION :
=================== log of boot-info 20180316_1840 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
Partition 2 does not start on physical sector boundary.
boot-info is executed in installed-session (Ubuntu 16.04.4 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.13.0-37-generic root=UUID=a1e66182-3aa6-47ac-a5cf-33d2b0538ab3 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.4 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="a1e66182-3aa6-47ac-a5cf-33d2b0538ab3" TYPE="ext4" PARTUUID="9e6ca929-01"
/dev/sda5: UUID="13882119-6b58-42e4-8c64-6f6768a80b1e" TYPE="swap" PARTUUID="9e6ca929-05"
/dev/sdb1: UUID="52448f4a-bc47-4323-ab21-b1d285b12613" TYPE="ext4" PARTUUID="6a59a08f-3a5f-4052-b34e-b62e12d7b5ed"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 févr. 28 19:41 grub.d
total 80
-rwxr-xr-x 1 root root 9791 févr. 8 15:55 00_header
-rwxr-xr-x 1 root root 6258 janv. 24 22:21 05_debian_theme
-rwxr-xr-x 1 root root 12512 févr. 8 15:55 10_linux
-rwxr-xr-x 1 root root 11082 févr. 8 15:55 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 févr. 8 15:55 30_os-prober
-rwxr-xr-x 1 root root 1418 févr. 8 15:55 30_uefi-firmware
-rwxr-xr-x 1 root root 214 févr. 8 15:55 40_custom
-rwxr-xr-x 1 root root 216 févr. 8 15:55 41_custom
-rw-r--r-- 1 root root 483 févr. 8 15:55 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x0000000077F58228 000042 (v01 00000000 00000000)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sdb1 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:240GB:scsi:512:4096:msdos:ATA KINGSTON SUV400S:;
1:1049kB:236GB:236GB:ext4::boot;
2:236GB:240GB:3967MB:::;
5:236GB:240GB:3967MB:linux-swap(v1)::;
BYT;
/dev/sdb:500GB:scsi:512:4096:gpt:ATA ST500DM002-1BD14:;
1:1049kB:500GB:500GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 465,8G
sdb1 part ext4 465,8G
sda disk 223,6G
sda2 part 1K
sda5 part swap 3,7G
sda1 part ext4 219,9G
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sda 0 0 0 running
sda2 0 0 0
sda5 0 0 0 [SWAP]
sda1 0 0 0 /
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1836328k,nr_inodes=459082,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=372536k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=33,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12101)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=372536k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sdc sg0 sg1 sg2 shm snapshot snd stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
Partition 2 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.8G 0 1.8G 0% /dev
tmpfs tmpfs 364M 6.1M 358M 2% /run
/dev/sda1 ext4 217G 5.0G 201G 3% /
tmpfs tmpfs 1.8G 23M 1.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.8G 0 1.8G 0% /sys/fs/cgroup
tmpfs tmpfs 364M 52K 364M 1% /run/user/1000
/dev/sdb1 ext4 459G 70M 435G 1% /mnt/boot-sav/sdb1
=================== fdisk -l:
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x9e6ca929
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 461111295 461109248 219.9G 83 Linux
/dev/sda2 461113342 468860927 7747586 3.7G 5 Extended
/dev/sda5 461113344 468860927 7747584 3.7G 82 Linux swap / Solaris
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 3BE143D7-BF9C-4290-8822-E3DC3AAE2E79
Device Start End Sectors Size Type
/dev/sdb1 2048 976771071 976769024 465.8G Linux filesystem
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA KINGSTON SUV400S) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.4 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.Désolé j'ai loupé mon 1er bootinfo. J'espère que ça ira mieux.
Hors ligne
#19 Le 28/03/2018, à 17:41
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
Après plusieurs tentatives infructueuses de réinstallations j'ai simplement réussi à revenir à l'état antérieur. A savoir SSD:ubuntu
et 2 HDD de données mais aucune améliorations du temps de démarrage. La dernière installation faite par l'assistant d'installation. Je suspect un soucis de disque (format ou autre) le ssd et le 1 HDD étant en msdos et le 3 en GPT semble-t-il. Bien que je ne comprenne pas pourquoi. Le bios s'est "bloqué" 2 fois lors d'un changement d'ordre de boot et également plusieurs lancement en live usb ont fini sur "pas d'image de lancement trouvé".
Hors ligne
#20 Le 28/03/2018, à 18:43
- ??
Re : Bios et lancement ubuntu lent [RESOLU]
Bonjour
Au vu du passé, donnes directement le début du suivi de la mise en route en copier/coller que tu obtiendras à l'écran via les commandes suivantes
dmesg | head -750dmesg | head -1500 | tail -750Donnes aussi le retour de ces commandes
systemd-analyze blame | head -25
systemd-analyze critical-chainDernière modification par ?? (Le 28/03/2018, à 19:38)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#21 Le 28/03/2018, à 19:33
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
ciol@ciol-desktop:~$ dmesg | head 750
head: impossible d'ouvrir '750' en lecture: Aucun fichier ou dossier de ce type
ciol@ciol-desktop:~$ dmesg | head 1500 | tail 750
head: impossible d'ouvrir '1500' en lecture: Aucun fichier ou dossier de ce type
tail: impossible d'ouvrir '750' en lecture: Aucun fichier ou dossier de ce type
ciol@ciol-desktop:~$ systemd-analyze blame | head -25
52.546s fwupd.service
7.714s NetworkManager-wait-online.service
513ms plymouth-start.service
400ms dev-mapper-ubuntu\x2d\x2dvg\x2droot.device
359ms apparmor.service
325ms plymouth-read-write.service
321ms lvm2-monitor.service
154ms lightdm.service
120ms snapd.service
105ms networking.service
85ms NetworkManager.service
80ms accounts-daemon.service
72ms systemd-logind.service
66ms systemd-rfkill.service
64ms thermald.service
61ms console-setup.service
61ms upower.service
60ms keyboard-setup.service
60ms irqbalance.service
48ms grub-common.service
46ms ondemand.service
43ms apport.service
42ms speech-dispatcher.service
38ms systemd-journald.service
37ms systemd-udev-trigger.service
ciol@ciol-desktop:~$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @8.737s
└─multi-user.target @8.737s
└─getty.target @8.737s
└─getty@tty1.service @8.737s
└─rc-local.service @8.732s +1ms
└─network-online.target @8.731s
└─NetworkManager-wait-online.service @1.017s +7.714s
└─NetworkManager.service @930ms +85ms
└─dbus.service @919ms
└─basic.target @903ms
└─sockets.target @903ms
└─snapd.socket @901ms +1ms
└─sysinit.target @901ms
└─apparmor.service @541ms +359ms
└─local-fs.target @539ms
└─run-user-1000-gvfs.mount @2.594s
└─run-user-1000.mount @2.356s
└─local-fs-pre.target @407ms
└─lvm2-monitor.service @86ms +321ms
└─lvm2-lvmetad.service @118ms
lines 1-23Comme vous le voyez pas r2ponse pour les 2 premières commandes et à l'issu de la dernière pas de retour à "ciol@ciol-desktop".
Je comprend pas tout, loin de là d'ailleurs... mais "52.546s fwupd.service" ça a l'air de faire beaucoup.
Hors ligne
#22 Le 28/03/2018, à 19:39
- ??
Re : Bios et lancement ubuntu lent [RESOLU]
J'ai rectifié pour les deux premières commandes
Je tiens à te dire que le temps de démarrage actuel me semble correct et n'est pas de 3 minutes
Il va juste falloir comprendre pourquoi il est nécessaire de recharger des firmware.
Dernière modification par ?? (Le 28/03/2018, à 19:48)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#23 Le 28/03/2018, à 19:46
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
ciol@ciol-desktop:~$ dmesg | head -750
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
[ 0.000000] Linux version 4.13.0-37-generic (buildd@lcy01-amd64-012) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #42~16.04.1-Ubuntu SMP Wed Mar 7 16:03:28 UTC 2018 (Ubuntu 4.13.0-37.42~16.04.1-generic 4.13.13)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007238bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007238c000-0x000000007238cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007238d000-0x00000000723b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000723b7000-0x0000000072408fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000072409000-0x0000000072985fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000072986000-0x0000000076e59fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076e5a000-0x00000000777b2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000777b3000-0x0000000077f99fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077f9a000-0x0000000077ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000175ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H110M-ITX/ac, BIOS P7.20 03/01/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x176000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0079000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0078800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fc600-0x000fc60f] mapped at [ffff9d04800fc600]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9d0480096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2412a000, 0x2412afff] PGTABLE
[ 0.000000] BRK [0x2412b000, 0x2412bfff] PGTABLE
[ 0.000000] BRK [0x2412c000, 0x2412cfff] PGTABLE
[ 0.000000] BRK [0x2412d000, 0x2412dfff] PGTABLE
[ 0.000000] BRK [0x2412e000, 0x2412efff] PGTABLE
[ 0.000000] BRK [0x2412f000, 0x2412ffff] PGTABLE
[ 0.000000] BRK [0x24130000, 0x24130fff] PGTABLE
[ 0.000000] BRK [0x24131000, 0x24131fff] PGTABLE
[ 0.000000] BRK [0x24132000, 0x24132fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31f5a000-0x34fa4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x0000000077F31098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000077F52020 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x0000000077F311D8 020E46 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000077F99F80 000040
[ 0.000000] ACPI: APIC 0x0000000077F52130 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000077F521B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000077F52200 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x0000000077F522A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000077F522E0 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x0000000077F52318 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x0000000077F52688 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000077F52720 00002B (v02 INTEL UsbCTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x0000000077F52750 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x0000000077F52788 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000077F527E0 0005EF (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.000000] ACPI: AAFT 0x0000000077F52DD0 00023D (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x0000000077F53010 005212 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000077F58228 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x0000000077F58270 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x0000000077F590C8 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000175ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x175fd3000-0x175ffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000175ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007238bfff]
[ 0.000000] node 0: [mem 0x00000000723b7000-0x0000000072408fff]
[ 0.000000] node 0: [mem 0x0000000072986000-0x0000000076e59fff]
[ 0.000000] node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000175ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000175ffffff]
[ 0.000000] On node 0 totalpages: 968782
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7523 pages used for memmap
[ 0.000000] DMA32 zone: 481459 pages, LIFO batch:31
[ 0.000000] Normal zone: 7552 pages used for memmap
[ 0.000000] Normal zone: 483328 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x0000000088ffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7238c000-0x7238cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7238d000-0x723b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x72409000-0x72985fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76e5a000-0x777b2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x777b3000-0x77f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77f9a000-0x77ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79000000-0x88ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x89000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff9d05f5c00000 s146520 r8192 d29608 u524288
[ 0.000000] pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 953622
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3671376K/3875128K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 203752K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37832 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Detected 3700.000 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=14784000)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.018935] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
[ 0.018939] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
[ 0.018959] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170531/tbxfload-228)
[ 0.024264] ACPI Error: 1 table load failures, 5 successful (20170531/tbxfload-246)
[ 0.024280] Security Framework initialized
[ 0.024281] Yama: becoming mindful.
[ 0.024293] AppArmor: AppArmor initialized
[ 0.024935] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.025250] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.025263] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.025275] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.025407] CPU: Physical Processor ID: 0
[ 0.025408] CPU: Processor Core ID: 0
[ 0.025412] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.025412] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025414] FEATURE SPEC_CTRL Present
[ 0.025421] mce: CPU supports 8 MCE banks
[ 0.025431] CPU0: Thermal monitoring enabled (TM1)
[ 0.025440] process: using mwait in idle threads
[ 0.025442] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.025442] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.025443] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.025443] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[ 0.025444] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled
[ 0.025444] Spectre V2 mitigation: Filling RSB on context switch
[ 0.025506] Freeing SMP alternatives memory: 36K
[ 0.026432] smpboot: Max logical packages: 2
[ 0.026436] DMAR: Host address width 39
[ 0.026437] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.026441] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.026441] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.026444] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.026444] DMAR: RMRR base: 0x00000077555000 end: 0x00000077574fff
[ 0.026448] DMAR: RMRR base: 0x00000078800000 end: 0x00000088ffffff
[ 0.026454] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.026455] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.026455] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.026455] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.027841] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.027842] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.031818] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071539] TSC deadline timer enabled
[ 0.071544] smpboot: CPU0: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.071588] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.071607] ... version: 4
[ 0.071608] ... bit width: 48
[ 0.071608] ... generic registers: 4
[ 0.071608] ... value mask: 0000ffffffffffff
[ 0.071609] ... max period: 00007fffffffffff
[ 0.071609] ... fixed-purpose events: 3
[ 0.071609] ... event mask: 000000070000000f
[ 0.071636] Hierarchical SRCU implementation.
[ 0.072000] smp: Bringing up secondary CPUs ...
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072000] #2 #3
[ 0.072000] smp: Brought up 1 node, 4 CPUs
[ 0.072000] smpboot: Total of 4 processors activated (29568.00 BogoMIPS)
[ 0.072161] devtmpfs: initialized
[ 0.072161] x86/mm: Memory block size: 128MB
[ 0.072228] evm: security.selinux
[ 0.072228] evm: security.SMACK64
[ 0.072229] evm: security.SMACK64EXEC
[ 0.072229] evm: security.SMACK64TRANSMUTE
[ 0.072229] evm: security.SMACK64MMAP
[ 0.072230] evm: security.ima
[ 0.072230] evm: security.capability
[ 0.072237] PM: Registering ACPI NVS region [mem 0x7238c000-0x7238cfff] (4096 bytes)
[ 0.072237] PM: Registering ACPI NVS region [mem 0x777b3000-0x77f99fff] (8286208 bytes)
[ 0.072237] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072237] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.072237] pinctrl core: initialized pinctrl subsystem
[ 0.072271] RTC time: 15:02:11, date: 03/28/18
[ 0.072318] NET: Registered protocol family 16
[ 0.072419] cpuidle: using governor ladder
[ 0.072419] cpuidle: using governor menu
[ 0.072419] PCCT header not found.
[ 0.072419] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.072419] ACPI: bus type PCI registered
[ 0.072419] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.072419] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.072419] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.072419] PCI: Using configuration type 1 for base access
[ 0.072576] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072576] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072576] ACPI: Added _OSI(Module Device)
[ 0.072576] ACPI: Added _OSI(Processor Device)
[ 0.072576] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072576] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072596] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.081134] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.083482] ACPI: Dynamic OEM Table Load:
[ 0.083491] ACPI: SSDT 0xFFFF9D05F05D7000 000726 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.083701] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.084756] ACPI: Dynamic OEM Table Load:
[ 0.084759] ACPI: SSDT 0xFFFF9D05F06A0C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.085408] ACPI: Dynamic OEM Table Load:
[ 0.085411] ACPI: SSDT 0xFFFF9D05F05D0000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.085780] ACPI: Dynamic OEM Table Load:
[ 0.085782] ACPI: SSDT 0xFFFF9D05F069D000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.087914] ACPI: Interpreter enabled
[ 0.087940] ACPI: (supports S0 S3 S4 S5)
[ 0.087941] ACPI: Using IOAPIC for interrupt routing
[ 0.087994] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.088551] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.091780] ACPI: Power Resource [WRST] (off)
[ 0.092009] ACPI: Power Resource [WRST] (off)
[ 0.092221] ACPI: Power Resource [WRST] (off)
[ 0.092437] ACPI: Power Resource [WRST] (off)
[ 0.092648] ACPI: Power Resource [WRST] (off)
[ 0.092861] ACPI: Power Resource [WRST] (off)
[ 0.093075] ACPI: Power Resource [WRST] (off)
[ 0.093288] ACPI: Power Resource [WRST] (off)
[ 0.093500] ACPI: Power Resource [WRST] (off)
[ 0.093712] ACPI: Power Resource [WRST] (off)
[ 0.093920] ACPI: Power Resource [WRST] (off)
[ 0.094130] ACPI: Power Resource [WRST] (off)
[ 0.094339] ACPI: Power Resource [WRST] (off)
[ 0.094549] ACPI: Power Resource [WRST] (off)
[ 0.094757] ACPI: Power Resource [WRST] (off)
[ 0.094968] ACPI: Power Resource [WRST] (off)
[ 0.095181] ACPI: Power Resource [WRST] (off)
[ 0.095397] ACPI: Power Resource [WRST] (off)
[ 0.095609] ACPI: Power Resource [WRST] (off)
[ 0.095818] ACPI: Power Resource [WRST] (off)
[ 0.104210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.104214] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.105364] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.105365] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.105825] PCI host bridge to bus 0000:00
[ 0.105826] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.105827] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.105828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.105829] pci_bus 0000:00: root bus resource [mem 0x89000000-0xdfffffff window]
[ 0.105830] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.105831] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.105837] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[ 0.106063] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.106071] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.106075] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.106078] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.106221] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.106241] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
[ 0.106300] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.106389] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.106408] pci 0000:00:14.2: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
[ 0.106540] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.106564] pci 0000:00:16.0: reg 0x10: [mem 0xdf14d000-0xdf14dfff 64bit]
[ 0.106628] pci 0000:00:16.0: PME# supported from D3hot
[ 0.106731] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.106747] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
[ 0.106753] pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
[ 0.106759] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.106766] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.106772] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.106779] pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
[ 0.106814] pci 0000:00:17.0: PME# supported from D3hot
[ 0.106909] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.106972] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.107096] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.107153] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.107277] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[ 0.107459] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.107473] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
[ 0.107603] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.107629] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[ 0.107659] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[ 0.107704] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.107831] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.107890] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
[ 0.107959] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.108115] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.108141] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
[ 0.108245] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.108362] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.108429] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
[ 0.108484] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
[ 0.108661] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.108783] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.108786] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.110008] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.110077] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110145] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110179] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110213] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110246] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110558] SCSI subsystem initialized
[ 0.110578] libata version 3.00 loaded.
[ 0.110578] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.110578] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.110578] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.110578] vgaarb: loaded
[ 0.110578] ACPI: bus type USB registered
[ 0.110578] usbcore: registered new interface driver usbfs
[ 0.110578] usbcore: registered new interface driver hub
[ 0.110578] usbcore: registered new device driver usb
[ 0.110578] EDAC MC: Ver: 3.0.0
[ 0.110578] PCI: Using ACPI for IRQ routing
[ 0.138789] PCI: pci_cache_line_size set to 64 bytes
[ 0.138827] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.138828] e820: reserve RAM buffer [mem 0x7238c000-0x73ffffff]
[ 0.138829] e820: reserve RAM buffer [mem 0x72409000-0x73ffffff]
[ 0.138829] e820: reserve RAM buffer [mem 0x76e5a000-0x77ffffff]
[ 0.138830] e820: reserve RAM buffer [mem 0x176000000-0x177ffffff]
[ 0.138877] NetLabel: Initializing
[ 0.138878] NetLabel: domain hash size = 128
[ 0.138878] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.138886] NetLabel: unlabeled traffic allowed by default
[ 0.138893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.138893] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.140014] clocksource: Switched to clocksource hpet
[ 0.145869] VFS: Disk quotas dquot_6.6.0
[ 0.145879] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.145950] AppArmor: AppArmor Filesystem Enabled
[ 0.145974] pnp: PnP ACPI init
[ 0.146200] system 00:00: [io 0x0280-0x028f] has been reserved
[ 0.146201] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.146201] system 00:00: [io 0x02a0-0x02af] has been reserved
[ 0.146202] system 00:00: [io 0x02b0-0x02bf] has been reserved
[ 0.146205] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146307] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.146309] system 00:01: [io 0xffff] has been reserved
[ 0.146310] system 00:01: [io 0xffff] has been reserved
[ 0.146310] system 00:01: [io 0xffff] has been reserved
[ 0.146311] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.146312] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.146314] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146369] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.146370] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146383] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146402] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.146403] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.146541] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.146542] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.146544] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.146545] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.146546] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.146547] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.146548] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.146549] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.146550] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.146551] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.146553] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146575] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.146576] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.146577] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.146578] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.146579] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.146580] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.146581] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.146582] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146766] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.146768] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147477] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.147478] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.147478] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.147480] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148042] pnp: PnP ACPI: found 9 devices
[ 0.155523] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.155538] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.155546] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.155549] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.155555] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.155556] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.155557] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.155558] pci_bus 0000:00: resource 7 [mem 0x89000000-0xdfffffff window]
[ 0.155558] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.155559] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[ 0.155649] NET: Registered protocol family 2
[ 0.155735] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.155783] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.155866] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.155885] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155923] NET: Registered protocol family 1
[ 0.155931] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.156675] PCI: CLS 0 bytes, default 64
[ 0.156697] Unpacking initramfs...
[ 0.639049] Freeing initrd memory: 49452K
[ 0.639097] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.639099] software IO TLB [mem 0x72e5a000-0x76e5a000] (64MB) mapped at [ffff9d04f2e5a000-ffff9d04f6e59fff]
[ 0.639269] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[ 0.639363] Scanning for low memory corruption every 60 seconds
[ 0.639612] audit: initializing netlink subsys (disabled)
[ 0.639658] audit: type=2000 audit(1522249331.639:1): state=initialized audit_enabled=0 res=1
[ 0.639883] Initialise system trusted keyrings
[ 0.639889] Key type blacklist registered
[ 0.639947] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.640618] zbud: loaded
[ 0.640941] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.641096] fuse init (API version 7.26)
[ 0.644386] Key type asymmetric registered
[ 0.644386] Asymmetric key parser 'x509' registered
[ 0.644402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.644454] io scheduler noop registered
[ 0.644455] io scheduler deadline registered
[ 0.644468] io scheduler cfq registered (default)
[ 0.644900] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.644912] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 0.644944] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.644944] vesafb: scrolling: redraw
[ 0.644945] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.644952] vesafb: framebuffer at 0xc0000000, mapped to 0xffffb33341000000, using 5632k, total 5632k
[ 0.645021] Console: switching to colour frame buffer device 200x56
[ 0.645032] fb0: VESA VGA frame buffer device
[ 0.645039] intel_idle: MWAIT substates: 0x142120
[ 0.645040] intel_idle: v0.4.1 model 0x5E
[ 0.645209] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.645287] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.645295] ACPI: Sleep Button [SLPB]
[ 0.645311] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.645318] ACPI: Power Button [PWRB]
[ 0.645334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.645395] ACPI: Power Button [PWRF]
[ 0.645545] GHES: HEST is not enabled!
[ 0.645622] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.647485] Linux agpgart interface v0.103
[ 0.648709] loop: module loaded
[ 0.648793] libphy: Fixed MDIO Bus: probed
[ 0.648794] tun: Universal TUN/TAP device driver, 1.6
[ 0.648844] PPP generic driver version 2.4.2
[ 0.648897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.648898] ehci-pci: EHCI PCI platform driver
[ 0.648903] ehci-platform: EHCI generic platform driver
[ 0.648907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.648907] ohci-pci: OHCI PCI platform driver
[ 0.648911] ohci-platform: OHCI generic platform driver
[ 0.648915] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.649019] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.649022] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.650106] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.650110] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.650169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.650170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.650171] usb usb1: Product: xHCI Host Controller
[ 0.650172] usb usb1: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.650173] usb usb1: SerialNumber: 0000:00:14.0
[ 0.650257] hub 1-0:1.0: USB hub found
[ 0.650268] hub 1-0:1.0: 10 ports detected
[ 0.650392] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.650393] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.650415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.650415] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.650416] usb usb2: Product: xHCI Host Controller
[ 0.650417] usb usb2: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.650418] usb usb2: SerialNumber: 0000:00:14.0
[ 0.650494] hub 2-0:1.0: USB hub found
[ 0.650501] hub 2-0:1.0: 4 ports detected
[ 0.650627] i8042: PNP: No PS/2 controller found.
[ 0.650759] mousedev: PS/2 mouse device common for all mice
[ 0.650959] rtc_cmos 00:03: RTC can wake from S4
[ 0.651341] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.651421] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.651424] i2c /dev entries driver
[ 0.651451] device-mapper: uevent: version 1.0.3
[ 0.651551] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.651553] intel_pstate: Intel P-state driver initializing
[ 0.651953] intel_pstate: HWP enabled
[ 0.652120] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.652679] NET: Registered protocol family 10
[ 0.655335] Segment Routing with IPv6
[ 0.655346] NET: Registered protocol family 17
[ 0.655351] Key type dns_resolver registered
[ 0.655618] RAS: Correctable Errors collector initialized.
[ 0.655637] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[ 0.655744] microcode: Microcode Update Driver: v2.2.
[ 0.655851] sched_clock: Marking stable (655741688, 0)->(656477146, -735458)
[ 0.656143] registered taskstats version 1
[ 0.656148] Loading compiled-in X.509 certificates
[ 0.657593] Loaded X.509 cert 'Build time autogenerated kernel key: 039842e4c5826cfde4aee35bb7ba969e0b39b60f'
[ 0.657604] zswap: loaded using pool lzo/zbud
[ 0.659748] Key type big_key registered
[ 0.659750] Key type trusted registered
[ 0.660811] Key type encrypted registered
[ 0.660815] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.660825] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.660848] evm: HMAC attrs: 0x1
[ 0.661321] Magic number: 10:637:33
[ 0.661503] rtc_cmos 00:03: setting system clock to 2018-03-28 15:02:11 UTC (1522249331)
[ 0.661572] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.661573] EDD information not available.
[ 0.661597] PM: Hibernation image not present or could not be loaded.
[ 0.662794] Freeing unused kernel memory: 2364K
[ 0.662795] Write protecting the kernel read-only data: 18432k
[ 0.663085] Freeing unused kernel memory: 2024K
[ 0.663207] Freeing unused kernel memory: 88K
[ 0.664327] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.664327] x86/mm: Checking user space page tables
[ 0.665345] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.700359] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.737270] ahci 0000:00:17.0: version 3.0
[ 0.737616] pps_core: LinuxPPS API ver. 1 registered
[ 0.737617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.739184] PTP clock support registered
[ 0.743219] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.743220] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.747541] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 0.747544] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.780455] scsi host0: ahci
[ 0.780592] scsi host1: ahci
[ 0.780723] scsi host2: ahci
[ 0.780854] scsi host3: ahci
[ 0.780884] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 125
[ 0.780888] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 125
[ 0.780892] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 125
[ 0.780897] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 125
[ 0.781122] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.976139] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 0.983328] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.051284] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:3c:25:99
[ 1.051285] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.051360] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.051802] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.054066] [drm] Memory usable by graphics device = 4096M
[ 1.054067] checking generic (c0000000 580000) vs hw (c0000000 10000000)
[ 1.054068] fb: switching to inteldrmfb from VESA VGA
[ 1.054082] Console: switching to colour dummy device 80x25
[ 1.054254] [drm] Replacing VGA console driver
[ 1.060173] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.060174] [drm] Driver supports precise vblank timestamp query.
[ 1.066442] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.066600] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.067787] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 1.068927] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.069301] acpi device:0f: registered as cooling_device4
[ 1.069357] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.096711] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.096734] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.096756] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.096780] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.097302] ata1.00: ATA-11: KINGSTON SUV400S37240G, 0C3G37R5, max UDMA/133
[ 1.097303] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.097850] ata2.00: ATA-7: Hitachi HDT725050VLA380, V56OA73A, max UDMA/133
[ 1.097851] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.098009] ata1.00: configured for UDMA/133
[ 1.098099] ata3.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
[ 1.098101] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.098304] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S 37R5 PQ: 0 ANSI: 5
[ 1.099398] ata2.00: configured for UDMA/133
[ 1.099749] ata3.00: configured for UDMA/133
[ 1.117595] usb 1-2: New USB device found, idVendor=8087, idProduct=07dc
[ 1.117597] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.136311] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.136495] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.136496] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.136510] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72505 A73A PQ: 0 ANSI: 5
[ 1.136511] sd 0:0:0:0: [sda] Write Protect is off
[ 1.136512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.136554] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.137416] sda: sda1 sda2 < sda5 >
[ 1.137927] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.176299] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.176399] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.176433] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.176434] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.176492] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.176524] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
[ 1.191217] sdb: sdb1
[ 1.191618] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.216128] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.216229] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.216230] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.216261] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.216263] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.216311] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.236025] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 1.259211] sdc: sdc1
[ 1.259659] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.660107] clocksource: Switched to clocksource tsc
[ 1.852924] fbcon: inteldrmfb (fb0) is primary device
[ 1.852958] Console: switching to colour frame buffer device 200x56
[ 1.852970] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.780449] [drm] RC6 on
[ 6.484135] usb 1-3: device descriptor read/64, error -110
[ 7.204541] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.295965] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.296073] systemd[1]: Detected architecture x86-64.
[ 7.296233] systemd[1]: Set hostname to <ciol-desktop>.
[ 7.352741] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.352792] systemd[1]: Listening on Journal Socket.
[ 7.352822] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.352839] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.352844] systemd[1]: Reached target User and Group Name Lookups.
[ 7.352858] systemd[1]: Listening on udev Kernel Socket.
[ 7.352877] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.374961] lp: driver loaded but no devices found
[ 7.378386] ppdev: user-space parallel port driver
[ 7.431151] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.436913] systemd-journald[275]: Received request to flush runtime journal from PID 1
[ 7.522200] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.528601] random: crng init done
[ 7.531880] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 7.535342] Bluetooth: Core ver 2.22
[ 7.535352] NET: Registered protocol family 31
[ 7.535352] Bluetooth: HCI device and connection manager initialized
[ 7.535354] Bluetooth: HCI socket layer initialized
[ 7.535356] Bluetooth: L2CAP socket layer initialized
[ 7.535359] Bluetooth: SCO socket layer initialized
[ 7.545361] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.547557] Bluetooth: HCI UART driver ver 2.3
[ 7.547561] Bluetooth: HCI UART protocol H4 registered
[ 7.547562] Bluetooth: HCI UART protocol BCSP registered
[ 7.547574] Bluetooth: HCI UART protocol LL registered
[ 7.547574] Bluetooth: HCI UART protocol ATH3K registered
[ 7.547575] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 7.547593] Bluetooth: HCI UART protocol Intel registered
[ 7.547601] Bluetooth: HCI UART protocol Broadcom registered
[ 7.547601] Bluetooth: HCI UART protocol QCA registered
[ 7.547602] Bluetooth: HCI UART protocol AG6XX registered
[ 7.547602] Bluetooth: HCI UART protocol Marvell registered
[ 7.577662] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 7.577663] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 7.577663] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 7.577664] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 7.577664] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 7.577665] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 7.589007] AVX2 version of gcm_enc/dec engaged.
[ 7.589008] AES CTR mode by8 optimization enabled
[ 7.590318] Intel(R) Wireless WiFi driver for Linux
[ 7.590319] Copyright(c) 2003- 2015 Intel Corporation
[ 7.614924] iwlwifi 0000:02:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
[ 7.656103] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 7.662206] intel_rapl: Found RAPL domain package
[ 7.662207] intel_rapl: Found RAPL domain core
[ 7.662208] intel_rapl: Found RAPL domain uncore
[ 7.662209] intel_rapl: Found RAPL domain dram
[ 7.674258] iwlwifi 0000:02:00.0: base HW address: f4:06:69:f1:23:04
[ 7.798393] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.799542] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.806505] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 7.810909] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 7.857974] Adding 3874812k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:3874812k SSFS
[ 7.902141] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.927501] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.927503] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.927504] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.927505] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.927505] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.927506] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.927507] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.927508] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.944394] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 7.944438] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 7.944477] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 7.944516] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 7.944556] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 7.944593] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 7.944629] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 7.944668] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 7.944702] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 7.944738] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 8.047501] WARN_ON(crtc->config->scaler_state.scaler_id < 0)
ciol@ciol-desktop:~$ dmesg | head -1500 | tail -750
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff9d05f5c00000 s146520 r8192 d29608 u524288
[ 0.000000] pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 953622
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3671376K/3875128K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 203752K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37832 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Detected 3700.000 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=14784000)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.018935] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
[ 0.018939] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
[ 0.018959] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170531/tbxfload-228)
[ 0.024264] ACPI Error: 1 table load failures, 5 successful (20170531/tbxfload-246)
[ 0.024280] Security Framework initialized
[ 0.024281] Yama: becoming mindful.
[ 0.024293] AppArmor: AppArmor initialized
[ 0.024935] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.025250] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.025263] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.025275] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.025407] CPU: Physical Processor ID: 0
[ 0.025408] CPU: Processor Core ID: 0
[ 0.025412] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.025412] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025414] FEATURE SPEC_CTRL Present
[ 0.025421] mce: CPU supports 8 MCE banks
[ 0.025431] CPU0: Thermal monitoring enabled (TM1)
[ 0.025440] process: using mwait in idle threads
[ 0.025442] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.025442] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.025443] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.025443] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[ 0.025444] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled
[ 0.025444] Spectre V2 mitigation: Filling RSB on context switch
[ 0.025506] Freeing SMP alternatives memory: 36K
[ 0.026432] smpboot: Max logical packages: 2
[ 0.026436] DMAR: Host address width 39
[ 0.026437] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.026441] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.026441] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.026444] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.026444] DMAR: RMRR base: 0x00000077555000 end: 0x00000077574fff
[ 0.026448] DMAR: RMRR base: 0x00000078800000 end: 0x00000088ffffff
[ 0.026454] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.026455] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.026455] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.026455] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.027841] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.027842] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.031818] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071539] TSC deadline timer enabled
[ 0.071544] smpboot: CPU0: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.071588] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.071607] ... version: 4
[ 0.071608] ... bit width: 48
[ 0.071608] ... generic registers: 4
[ 0.071608] ... value mask: 0000ffffffffffff
[ 0.071609] ... max period: 00007fffffffffff
[ 0.071609] ... fixed-purpose events: 3
[ 0.071609] ... event mask: 000000070000000f
[ 0.071636] Hierarchical SRCU implementation.
[ 0.072000] smp: Bringing up secondary CPUs ...
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072000] #2 #3
[ 0.072000] smp: Brought up 1 node, 4 CPUs
[ 0.072000] smpboot: Total of 4 processors activated (29568.00 BogoMIPS)
[ 0.072161] devtmpfs: initialized
[ 0.072161] x86/mm: Memory block size: 128MB
[ 0.072228] evm: security.selinux
[ 0.072228] evm: security.SMACK64
[ 0.072229] evm: security.SMACK64EXEC
[ 0.072229] evm: security.SMACK64TRANSMUTE
[ 0.072229] evm: security.SMACK64MMAP
[ 0.072230] evm: security.ima
[ 0.072230] evm: security.capability
[ 0.072237] PM: Registering ACPI NVS region [mem 0x7238c000-0x7238cfff] (4096 bytes)
[ 0.072237] PM: Registering ACPI NVS region [mem 0x777b3000-0x77f99fff] (8286208 bytes)
[ 0.072237] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072237] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.072237] pinctrl core: initialized pinctrl subsystem
[ 0.072271] RTC time: 15:02:11, date: 03/28/18
[ 0.072318] NET: Registered protocol family 16
[ 0.072419] cpuidle: using governor ladder
[ 0.072419] cpuidle: using governor menu
[ 0.072419] PCCT header not found.
[ 0.072419] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.072419] ACPI: bus type PCI registered
[ 0.072419] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.072419] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.072419] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.072419] PCI: Using configuration type 1 for base access
[ 0.072576] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072576] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072576] ACPI: Added _OSI(Module Device)
[ 0.072576] ACPI: Added _OSI(Processor Device)
[ 0.072576] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072576] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072596] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.081134] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.083482] ACPI: Dynamic OEM Table Load:
[ 0.083491] ACPI: SSDT 0xFFFF9D05F05D7000 000726 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.083701] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.084756] ACPI: Dynamic OEM Table Load:
[ 0.084759] ACPI: SSDT 0xFFFF9D05F06A0C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.085408] ACPI: Dynamic OEM Table Load:
[ 0.085411] ACPI: SSDT 0xFFFF9D05F05D0000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.085780] ACPI: Dynamic OEM Table Load:
[ 0.085782] ACPI: SSDT 0xFFFF9D05F069D000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.087914] ACPI: Interpreter enabled
[ 0.087940] ACPI: (supports S0 S3 S4 S5)
[ 0.087941] ACPI: Using IOAPIC for interrupt routing
[ 0.087994] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.088551] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.091780] ACPI: Power Resource [WRST] (off)
[ 0.092009] ACPI: Power Resource [WRST] (off)
[ 0.092221] ACPI: Power Resource [WRST] (off)
[ 0.092437] ACPI: Power Resource [WRST] (off)
[ 0.092648] ACPI: Power Resource [WRST] (off)
[ 0.092861] ACPI: Power Resource [WRST] (off)
[ 0.093075] ACPI: Power Resource [WRST] (off)
[ 0.093288] ACPI: Power Resource [WRST] (off)
[ 0.093500] ACPI: Power Resource [WRST] (off)
[ 0.093712] ACPI: Power Resource [WRST] (off)
[ 0.093920] ACPI: Power Resource [WRST] (off)
[ 0.094130] ACPI: Power Resource [WRST] (off)
[ 0.094339] ACPI: Power Resource [WRST] (off)
[ 0.094549] ACPI: Power Resource [WRST] (off)
[ 0.094757] ACPI: Power Resource [WRST] (off)
[ 0.094968] ACPI: Power Resource [WRST] (off)
[ 0.095181] ACPI: Power Resource [WRST] (off)
[ 0.095397] ACPI: Power Resource [WRST] (off)
[ 0.095609] ACPI: Power Resource [WRST] (off)
[ 0.095818] ACPI: Power Resource [WRST] (off)
[ 0.104210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.104214] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.105364] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.105365] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.105825] PCI host bridge to bus 0000:00
[ 0.105826] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.105827] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.105828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.105829] pci_bus 0000:00: root bus resource [mem 0x89000000-0xdfffffff window]
[ 0.105830] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.105831] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.105837] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[ 0.106063] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.106071] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.106075] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.106078] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.106221] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.106241] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
[ 0.106300] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.106389] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.106408] pci 0000:00:14.2: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
[ 0.106540] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.106564] pci 0000:00:16.0: reg 0x10: [mem 0xdf14d000-0xdf14dfff 64bit]
[ 0.106628] pci 0000:00:16.0: PME# supported from D3hot
[ 0.106731] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.106747] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
[ 0.106753] pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
[ 0.106759] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.106766] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.106772] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.106779] pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
[ 0.106814] pci 0000:00:17.0: PME# supported from D3hot
[ 0.106909] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.106972] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.107096] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.107153] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.107277] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[ 0.107459] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.107473] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
[ 0.107603] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.107629] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[ 0.107659] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[ 0.107704] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.107831] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.107890] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
[ 0.107959] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.108115] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.108141] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
[ 0.108245] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.108362] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.108429] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
[ 0.108484] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
[ 0.108661] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.108783] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.108786] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.110008] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.110077] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110145] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110179] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110213] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110246] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110558] SCSI subsystem initialized
[ 0.110578] libata version 3.00 loaded.
[ 0.110578] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.110578] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.110578] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.110578] vgaarb: loaded
[ 0.110578] ACPI: bus type USB registered
[ 0.110578] usbcore: registered new interface driver usbfs
[ 0.110578] usbcore: registered new interface driver hub
[ 0.110578] usbcore: registered new device driver usb
[ 0.110578] EDAC MC: Ver: 3.0.0
[ 0.110578] PCI: Using ACPI for IRQ routing
[ 0.138789] PCI: pci_cache_line_size set to 64 bytes
[ 0.138827] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.138828] e820: reserve RAM buffer [mem 0x7238c000-0x73ffffff]
[ 0.138829] e820: reserve RAM buffer [mem 0x72409000-0x73ffffff]
[ 0.138829] e820: reserve RAM buffer [mem 0x76e5a000-0x77ffffff]
[ 0.138830] e820: reserve RAM buffer [mem 0x176000000-0x177ffffff]
[ 0.138877] NetLabel: Initializing
[ 0.138878] NetLabel: domain hash size = 128
[ 0.138878] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.138886] NetLabel: unlabeled traffic allowed by default
[ 0.138893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.138893] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.140014] clocksource: Switched to clocksource hpet
[ 0.145869] VFS: Disk quotas dquot_6.6.0
[ 0.145879] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.145950] AppArmor: AppArmor Filesystem Enabled
[ 0.145974] pnp: PnP ACPI init
[ 0.146200] system 00:00: [io 0x0280-0x028f] has been reserved
[ 0.146201] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.146201] system 00:00: [io 0x02a0-0x02af] has been reserved
[ 0.146202] system 00:00: [io 0x02b0-0x02bf] has been reserved
[ 0.146205] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146307] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.146309] system 00:01: [io 0xffff] has been reserved
[ 0.146310] system 00:01: [io 0xffff] has been reserved
[ 0.146310] system 00:01: [io 0xffff] has been reserved
[ 0.146311] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.146312] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.146314] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146369] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.146370] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146383] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146402] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.146403] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.146541] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.146542] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.146544] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.146545] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.146546] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.146547] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.146548] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.146549] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.146550] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.146551] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.146553] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146575] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.146576] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.146577] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.146578] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.146579] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.146580] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.146581] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.146582] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146766] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.146768] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147477] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.147478] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.147478] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.147480] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148042] pnp: PnP ACPI: found 9 devices
[ 0.155523] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.155538] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.155546] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.155549] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.155555] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.155556] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.155557] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.155558] pci_bus 0000:00: resource 7 [mem 0x89000000-0xdfffffff window]
[ 0.155558] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.155559] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[ 0.155649] NET: Registered protocol family 2
[ 0.155735] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.155783] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.155866] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.155885] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155923] NET: Registered protocol family 1
[ 0.155931] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.156675] PCI: CLS 0 bytes, default 64
[ 0.156697] Unpacking initramfs...
[ 0.639049] Freeing initrd memory: 49452K
[ 0.639097] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.639099] software IO TLB [mem 0x72e5a000-0x76e5a000] (64MB) mapped at [ffff9d04f2e5a000-ffff9d04f6e59fff]
[ 0.639269] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[ 0.639363] Scanning for low memory corruption every 60 seconds
[ 0.639612] audit: initializing netlink subsys (disabled)
[ 0.639658] audit: type=2000 audit(1522249331.639:1): state=initialized audit_enabled=0 res=1
[ 0.639883] Initialise system trusted keyrings
[ 0.639889] Key type blacklist registered
[ 0.639947] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.640618] zbud: loaded
[ 0.640941] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.641096] fuse init (API version 7.26)
[ 0.644386] Key type asymmetric registered
[ 0.644386] Asymmetric key parser 'x509' registered
[ 0.644402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.644454] io scheduler noop registered
[ 0.644455] io scheduler deadline registered
[ 0.644468] io scheduler cfq registered (default)
[ 0.644900] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.644912] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 0.644944] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.644944] vesafb: scrolling: redraw
[ 0.644945] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.644952] vesafb: framebuffer at 0xc0000000, mapped to 0xffffb33341000000, using 5632k, total 5632k
[ 0.645021] Console: switching to colour frame buffer device 200x56
[ 0.645032] fb0: VESA VGA frame buffer device
[ 0.645039] intel_idle: MWAIT substates: 0x142120
[ 0.645040] intel_idle: v0.4.1 model 0x5E
[ 0.645209] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.645287] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.645295] ACPI: Sleep Button [SLPB]
[ 0.645311] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.645318] ACPI: Power Button [PWRB]
[ 0.645334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.645395] ACPI: Power Button [PWRF]
[ 0.645545] GHES: HEST is not enabled!
[ 0.645622] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.647485] Linux agpgart interface v0.103
[ 0.648709] loop: module loaded
[ 0.648793] libphy: Fixed MDIO Bus: probed
[ 0.648794] tun: Universal TUN/TAP device driver, 1.6
[ 0.648844] PPP generic driver version 2.4.2
[ 0.648897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.648898] ehci-pci: EHCI PCI platform driver
[ 0.648903] ehci-platform: EHCI generic platform driver
[ 0.648907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.648907] ohci-pci: OHCI PCI platform driver
[ 0.648911] ohci-platform: OHCI generic platform driver
[ 0.648915] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.649019] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.649022] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.650106] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.650110] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.650169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.650170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.650171] usb usb1: Product: xHCI Host Controller
[ 0.650172] usb usb1: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.650173] usb usb1: SerialNumber: 0000:00:14.0
[ 0.650257] hub 1-0:1.0: USB hub found
[ 0.650268] hub 1-0:1.0: 10 ports detected
[ 0.650392] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.650393] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.650415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.650415] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.650416] usb usb2: Product: xHCI Host Controller
[ 0.650417] usb usb2: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.650418] usb usb2: SerialNumber: 0000:00:14.0
[ 0.650494] hub 2-0:1.0: USB hub found
[ 0.650501] hub 2-0:1.0: 4 ports detected
[ 0.650627] i8042: PNP: No PS/2 controller found.
[ 0.650759] mousedev: PS/2 mouse device common for all mice
[ 0.650959] rtc_cmos 00:03: RTC can wake from S4
[ 0.651341] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.651421] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.651424] i2c /dev entries driver
[ 0.651451] device-mapper: uevent: version 1.0.3
[ 0.651551] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.651553] intel_pstate: Intel P-state driver initializing
[ 0.651953] intel_pstate: HWP enabled
[ 0.652120] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.652679] NET: Registered protocol family 10
[ 0.655335] Segment Routing with IPv6
[ 0.655346] NET: Registered protocol family 17
[ 0.655351] Key type dns_resolver registered
[ 0.655618] RAS: Correctable Errors collector initialized.
[ 0.655637] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[ 0.655744] microcode: Microcode Update Driver: v2.2.
[ 0.655851] sched_clock: Marking stable (655741688, 0)->(656477146, -735458)
[ 0.656143] registered taskstats version 1
[ 0.656148] Loading compiled-in X.509 certificates
[ 0.657593] Loaded X.509 cert 'Build time autogenerated kernel key: 039842e4c5826cfde4aee35bb7ba969e0b39b60f'
[ 0.657604] zswap: loaded using pool lzo/zbud
[ 0.659748] Key type big_key registered
[ 0.659750] Key type trusted registered
[ 0.660811] Key type encrypted registered
[ 0.660815] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.660825] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.660848] evm: HMAC attrs: 0x1
[ 0.661321] Magic number: 10:637:33
[ 0.661503] rtc_cmos 00:03: setting system clock to 2018-03-28 15:02:11 UTC (1522249331)
[ 0.661572] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.661573] EDD information not available.
[ 0.661597] PM: Hibernation image not present or could not be loaded.
[ 0.662794] Freeing unused kernel memory: 2364K
[ 0.662795] Write protecting the kernel read-only data: 18432k
[ 0.663085] Freeing unused kernel memory: 2024K
[ 0.663207] Freeing unused kernel memory: 88K
[ 0.664327] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.664327] x86/mm: Checking user space page tables
[ 0.665345] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.700359] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.737270] ahci 0000:00:17.0: version 3.0
[ 0.737616] pps_core: LinuxPPS API ver. 1 registered
[ 0.737617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.739184] PTP clock support registered
[ 0.743219] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.743220] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.747541] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 0.747544] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.780455] scsi host0: ahci
[ 0.780592] scsi host1: ahci
[ 0.780723] scsi host2: ahci
[ 0.780854] scsi host3: ahci
[ 0.780884] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 125
[ 0.780888] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 125
[ 0.780892] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 125
[ 0.780897] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 125
[ 0.781122] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.976139] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 0.983328] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.051284] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:3c:25:99
[ 1.051285] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.051360] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.051802] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.054066] [drm] Memory usable by graphics device = 4096M
[ 1.054067] checking generic (c0000000 580000) vs hw (c0000000 10000000)
[ 1.054068] fb: switching to inteldrmfb from VESA VGA
[ 1.054082] Console: switching to colour dummy device 80x25
[ 1.054254] [drm] Replacing VGA console driver
[ 1.060173] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.060174] [drm] Driver supports precise vblank timestamp query.
[ 1.066442] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.066600] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.067787] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 1.068927] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.069301] acpi device:0f: registered as cooling_device4
[ 1.069357] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.096711] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.096734] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.096756] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.096780] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.097302] ata1.00: ATA-11: KINGSTON SUV400S37240G, 0C3G37R5, max UDMA/133
[ 1.097303] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.097850] ata2.00: ATA-7: Hitachi HDT725050VLA380, V56OA73A, max UDMA/133
[ 1.097851] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.098009] ata1.00: configured for UDMA/133
[ 1.098099] ata3.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
[ 1.098101] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.098304] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S 37R5 PQ: 0 ANSI: 5
[ 1.099398] ata2.00: configured for UDMA/133
[ 1.099749] ata3.00: configured for UDMA/133
[ 1.117595] usb 1-2: New USB device found, idVendor=8087, idProduct=07dc
[ 1.117597] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.136311] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.136495] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.136496] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.136510] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72505 A73A PQ: 0 ANSI: 5
[ 1.136511] sd 0:0:0:0: [sda] Write Protect is off
[ 1.136512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.136554] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.137416] sda: sda1 sda2 < sda5 >
[ 1.137927] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.176299] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.176399] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.176433] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.176434] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.176492] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.176524] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
[ 1.191217] sdb: sdb1
[ 1.191618] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.216128] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.216229] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.216230] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.216261] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.216263] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.216311] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.236025] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 1.259211] sdc: sdc1
[ 1.259659] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.660107] clocksource: Switched to clocksource tsc
[ 1.852924] fbcon: inteldrmfb (fb0) is primary device
[ 1.852958] Console: switching to colour frame buffer device 200x56
[ 1.852970] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.780449] [drm] RC6 on
[ 6.484135] usb 1-3: device descriptor read/64, error -110
[ 7.204541] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.295965] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.296073] systemd[1]: Detected architecture x86-64.
[ 7.296233] systemd[1]: Set hostname to <ciol-desktop>.
[ 7.352741] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.352792] systemd[1]: Listening on Journal Socket.
[ 7.352822] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.352839] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.352844] systemd[1]: Reached target User and Group Name Lookups.
[ 7.352858] systemd[1]: Listening on udev Kernel Socket.
[ 7.352877] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.374961] lp: driver loaded but no devices found
[ 7.378386] ppdev: user-space parallel port driver
[ 7.431151] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.436913] systemd-journald[275]: Received request to flush runtime journal from PID 1
[ 7.522200] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.528601] random: crng init done
[ 7.531880] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 7.535342] Bluetooth: Core ver 2.22
[ 7.535352] NET: Registered protocol family 31
[ 7.535352] Bluetooth: HCI device and connection manager initialized
[ 7.535354] Bluetooth: HCI socket layer initialized
[ 7.535356] Bluetooth: L2CAP socket layer initialized
[ 7.535359] Bluetooth: SCO socket layer initialized
[ 7.545361] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.547557] Bluetooth: HCI UART driver ver 2.3
[ 7.547561] Bluetooth: HCI UART protocol H4 registered
[ 7.547562] Bluetooth: HCI UART protocol BCSP registered
[ 7.547574] Bluetooth: HCI UART protocol LL registered
[ 7.547574] Bluetooth: HCI UART protocol ATH3K registered
[ 7.547575] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 7.547593] Bluetooth: HCI UART protocol Intel registered
[ 7.547601] Bluetooth: HCI UART protocol Broadcom registered
[ 7.547601] Bluetooth: HCI UART protocol QCA registered
[ 7.547602] Bluetooth: HCI UART protocol AG6XX registered
[ 7.547602] Bluetooth: HCI UART protocol Marvell registered
[ 7.577662] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 7.577663] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 7.577663] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 7.577664] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 7.577664] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 7.577665] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 7.589007] AVX2 version of gcm_enc/dec engaged.
[ 7.589008] AES CTR mode by8 optimization enabled
[ 7.590318] Intel(R) Wireless WiFi driver for Linux
[ 7.590319] Copyright(c) 2003- 2015 Intel Corporation
[ 7.614924] iwlwifi 0000:02:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
[ 7.656103] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 7.662206] intel_rapl: Found RAPL domain package
[ 7.662207] intel_rapl: Found RAPL domain core
[ 7.662208] intel_rapl: Found RAPL domain uncore
[ 7.662209] intel_rapl: Found RAPL domain dram
[ 7.674258] iwlwifi 0000:02:00.0: base HW address: f4:06:69:f1:23:04
[ 7.798393] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.799542] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.806505] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 7.810909] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 7.857974] Adding 3874812k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:3874812k SSFS
[ 7.902141] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.927501] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.927503] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.927504] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.927505] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.927505] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.927506] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.927507] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.927508] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.944394] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 7.944438] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 7.944477] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 7.944516] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 7.944556] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 7.944593] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 7.944629] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 7.944668] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 7.944702] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 7.944738] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 8.047501] WARN_ON(crtc->config->scaler_state.scaler_id < 0)
[ 8.047520] ------------[ cut here ]------------
[ 8.047549] WARNING: CPU: 2 PID: 340 at /build/linux-hwe-qx9Tq0/linux-hwe-4.13.0/drivers/gpu/drm/i915/intel_display.c:4755 skylake_pfit_enable+0xe7/0xf0 [i915]
[ 8.047549] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic arc4 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp iwlmvm kvm_intel mac80211 kvm snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel pcbc snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer iwlwifi aesni_intel aes_x86_64 crypto_simd glue_helper cryptd intel_cstate cfg80211 intel_rapl_perf snd hci_uart soundcore shpchp btbcm serdev btqca btintel bluetooth mei_me mei intel_pch_thermal ecdh_generic intel_lpss_acpi intel_lpss mac_hid acpi_als kfifo_buf acpi_pad industrialio parport_pc ppdev lp parport autofs4 i915 i2c_algo_bit drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm pps_core
[ 8.047573] ahci libahci video pinctrl_sunrisepoint pinctrl_intel i2c_hid hid
[ 8.047576] CPU: 2 PID: 340 Comm: plymouthd Not tainted 4.13.0-37-generic #42~16.04.1-Ubuntu
[ 8.047577] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./H110M-ITX/ac, BIOS P7.20 03/01/2018
[ 8.047578] task: ffff9d05ee33af80 task.stack: ffffb33340edc000
[ 8.047594] RIP: 0010:skylake_pfit_enable+0xe7/0xf0 [i915]
[ 8.047595] RSP: 0018:ffffb33340edf910 EFLAGS: 00010282
[ 8.047596] RAX: 0000000000000031 RBX: ffff9d05f0580000 RCX: ffffffffa4e611c8
[ 8.047596] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000202
[ 8.047597] RBP: ffffb33340edf930 R08: 0000000000000031 R09: 00000000000002ed
[ 8.047597] R10: ffffffffc0308ae0 R11: 0000000000000031 R12: ffff9d05ec9af800
[ 8.047598] R13: ffff9d05e5b28000 R14: ffff9d05e5b28000 R15: ffff9d05ee808000
[ 8.047599] FS: 00007f26b429d740(0000) GS:ffff9d05f5d00000(0000) knlGS:0000000000000000
[ 8.047599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8.047600] CR2: 0000562800cdfb50 CR3: 000000016cfd8005 CR4: 00000000003606e0
[ 8.047601] Call Trace:
[ 8.047618] haswell_crtc_enable+0x2b4/0x820 [i915]
[ 8.047621] ? finish_wait+0x56/0x70
[ 8.047636] intel_update_crtc+0x5a/0xf0 [i915]
[ 8.047651] skl_update_crtcs+0x17d/0x200 [i915]
[ 8.047665] intel_atomic_commit_tail+0x333/0x10b0 [i915]
[ 8.047667] ? __schedule+0x3de/0x8b0
[ 8.047680] intel_atomic_commit+0x413/0x4b0 [i915]
[ 8.047690] ? drm_atomic_check_only+0x3d0/0x580 [drm]
[ 8.047696] ? handle_conflicting_encoders+0x28e/0x2a0 [drm_kms_helper]
[ 8.047702] drm_atomic_commit+0x51/0x60 [drm]
[ 8.047705] drm_atomic_helper_set_config+0x63/0xa0 [drm_kms_helper]
[ 8.047711] __drm_mode_set_config_internal+0x6b/0x120 [drm]
[ 8.047717] drm_mode_setcrtc+0x4f6/0x640 [drm]
[ 8.047719] ? ww_mutex_unlock+0x26/0x30
[ 8.047723] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.047728] drm_ioctl_kernel+0x6b/0xb0 [drm]
[ 8.047733] drm_ioctl+0x3e4/0x450 [drm]
[ 8.047738] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.047740] ? new_sync_read+0xe2/0x130
[ 8.047742] do_vfs_ioctl+0xa4/0x600
[ 8.047744] SyS_ioctl+0x79/0x90
[ 8.047745] entry_SYSCALL_64_fastpath+0x24/0xab
[ 8.047746] RIP: 0033:0x7f26b39baf47
[ 8.047747] RSP: 002b:00007fff5c28fee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 8.047748] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f26b39baf47
[ 8.047748] RDX: 00007fff5c28ff20 RSI: 00000000c06864a2 RDI: 0000000000000009
[ 8.047749] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000001f5ae80
[ 8.047749] R10: 0000000001f5a790 R11: 0000000000000246 R12: 0000000000000000
[ 8.047750] R13: 0000000001fe0990 R14: 0000000000000000 R15: 0000000000000000
[ 8.047750] Code: 4c 89 e7 8b 92 20 03 00 00 e8 96 91 59 e4 5b 41 5c 41 5d 41 5e 5d f3 c3 48 c7 c6 f0 97 34 c0 48 c7 c7 31 67 33 c0 e8 6a df a7 e3 <0f> ff eb df 0f 1f 44 00 00 0f 1f 44 00 00 55 48 83 8f 30 37 00
[ 8.047769] ---[ end trace 5a6ab86b817651f7 ]---
[ 8.074540] [drm:pipe_config_err [i915]] *ERROR* mismatch in output_types (expected 0x00000400, found 0x00000040)
[ 8.074558] [drm:pipe_config_err [i915]] *ERROR* mismatch in pch_pfit.enabled (expected 1, found 0)
[ 8.074574] [drm:pipe_config_err [i915]] *ERROR* mismatch in pch_pfit.size (expected 0x06400384, found 0x00000000)
[ 8.074575] pipe state doesn't match!
[ 8.074596] ------------[ cut here ]------------
[ 8.074612] WARNING: CPU: 2 PID: 340 at /build/linux-hwe-qx9Tq0/linux-hwe-4.13.0/drivers/gpu/drm/i915/intel_display.c:12277 intel_atomic_commit_tail+0xdc5/0x10b0 [i915]
[ 8.074613] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic arc4 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp iwlmvm kvm_intel mac80211 kvm snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel pcbc snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer iwlwifi aesni_intel aes_x86_64 crypto_simd glue_helper cryptd intel_cstate cfg80211 intel_rapl_perf snd hci_uart soundcore shpchp btbcm serdev btqca btintel bluetooth mei_me mei intel_pch_thermal ecdh_generic intel_lpss_acpi intel_lpss mac_hid acpi_als kfifo_buf acpi_pad industrialio parport_pc ppdev lp parport autofs4 i915 i2c_algo_bit drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm pps_core
[ 8.074635] ahci libahci video pinctrl_sunrisepoint pinctrl_intel i2c_hid hid
[ 8.074639] CPU: 2 PID: 340 Comm: plymouthd Tainted: G W 4.13.0-37-generic #42~16.04.1-Ubuntu
[ 8.074639] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./H110M-ITX/ac, BIOS P7.20 03/01/2018
[ 8.074640] task: ffff9d05ee33af80 task.stack: ffffb33340edc000
[ 8.074655] RIP: 0010:intel_atomic_commit_tail+0xdc5/0x10b0 [i915]
[ 8.074655] RSP: 0018:ffffb33340edfa88 EFLAGS: 00010282
[ 8.074656] RAX: 0000000000000019 RBX: ffff9d05e5b28308 RCX: 0000000000000006
[ 8.074657] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff9d05f5d16570
[ 8.074657] RBP: ffffb33340edfb40 R08: 0000000000000001 R09: 0000000000000323
[ 8.074658] R10: ffff9d05e5b28000 R11: 0000000000000323 R12: ffff9d05f0580000
[ 8.074659] R13: ffff9d05e66e6000 R14: ffff9d05e5b28310 R15: ffff9d05ec9af800
[ 8.074659] FS: 00007f26b429d740(0000) GS:ffff9d05f5d00000(0000) knlGS:0000000000000000
[ 8.074660] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8.074661] CR2: 00007ff7b2db6000 CR3: 000000016cfd8005 CR4: 00000000003606e0
[ 8.074661] Call Trace:
[ 8.074665] ? wait_woken+0x80/0x80
[ 8.074679] intel_atomic_commit+0x413/0x4b0 [i915]
[ 8.074691] ? drm_atomic_check_only+0x3d0/0x580 [drm]
[ 8.074697] ? handle_conflicting_encoders+0x28e/0x2a0 [drm_kms_helper]
[ 8.074703] drm_atomic_commit+0x51/0x60 [drm]
[ 8.074707] drm_atomic_helper_set_config+0x63/0xa0 [drm_kms_helper]
[ 8.074713] __drm_mode_set_config_internal+0x6b/0x120 [drm]
[ 8.074719] drm_mode_setcrtc+0x4f6/0x640 [drm]
[ 8.074720] ? ww_mutex_unlock+0x26/0x30
[ 8.074725] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.074730] drm_ioctl_kernel+0x6b/0xb0 [drm]
[ 8.074735] drm_ioctl+0x3e4/0x450 [drm]
[ 8.074740] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.074742] ? new_sync_read+0xe2/0x130
[ 8.074744] do_vfs_ioctl+0xa4/0x600
[ 8.074746] SyS_ioctl+0x79/0x90
[ 8.074747] entry_SYSCALL_64_fastpath+0x24/0xab
[ 8.074748] RIP: 0033:0x7f26b39baf47
[ 8.074748] RSP: 002b:00007fff5c28fee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 8.074749] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f26b39baf47
[ 8.074750] RDX: 00007fff5c28ff20 RSI: 00000000c06864a2 RDI: 0000000000000009
[ 8.074750] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000001f5ae80
[ 8.074751] R10: 0000000001f5a790 R11: 0000000000000246 R12: 0000000000000000
[ 8.074751] R13: 0000000001fe0990 R14: 0000000000000000 R15: 0000000000000000
[ 8.074752] Code: b6 d0 0f b6 f1 48 c7 c7 c0 b7 34 c0 e8 56 d8 a6 e3 0f ff 4c 8b 95 50 ff ff ff e9 47 f8 ff ff 48 c7 c7 54 6f 33 c0 e8 3c d8 a6 e3 <0f> ff e9 dd f8 ff ff 80 3d 6f 8a 0f 00 00 0f 85 23 02 00 00 48
[ 8.074771] ---[ end trace 5a6ab86b817651f8 ]---
[ 8.164097] audit: type=1400 audit(1522249339.002:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=768 comm="apparmor_parser"
[ 8.164105] audit: type=1400 audit(1522249339.002:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=768 comm="apparmor_parser"
[ 8.164111] audit: type=1400 audit(1522249339.002:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=768 comm="apparmor_parser"
[ 8.164113] audit: type=1400 audit(1522249339.002:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=768 comm="apparmor_parser"
[ 8.164536] audit: type=1400 audit(1522249339.003:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=767 comm="apparmor_parser"
[ 8.164538] audit: type=1400 audit(1522249339.003:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=767 comm="apparmor_parser"
[ 8.165745] audit: type=1400 audit(1522249339.004:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=773 comm="apparmor_parser"
[ 8.166211] audit: type=1400 audit(1522249339.004:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=771 comm="apparmor_parser"
[ 8.166213] audit: type=1400 audit(1522249339.004:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=771 comm="apparmor_parser"
[ 8.166281] audit: type=1400 audit(1522249339.004:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=772 comm="apparmor_parser"
[ 8.321127] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.468820] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.471391] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 8.656132] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 8.733649] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.319670] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.319673] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 10.319721] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 12.192350] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.192352] Bluetooth: BNEP filters: protocol multicast
[ 12.192355] Bluetooth: BNEP socket layer initialized
[ 22.100201] usb 1-3: device descriptor read/64, error -110
[ 22.328126] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ 27.476201] usb 1-3: device descriptor read/64, error -110
[ 42.981451] usb 1-3: device descriptor read/64, error -110
[ 43.205757] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 48.169181] usb 1-3: device descriptor read/8, error -110
[ 53.513423] usb 1-3: device descriptor read/8, error -110
[ 53.740074] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[ 58.873836] usb 1-3: device descriptor read/8, error -110
[ 64.241681] usb 1-3: device descriptor read/8, error -110
[ 64.349249] usb usb1-port3: unable to enumerate USB device
[ 64.469137] usb 1-7: new low-speed USB device number 7 using xhci_hcd
[ 64.614575] usb 1-7: New USB device found, idVendor=0461, idProduct=0010
[ 64.614576] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 64.614589] usb 1-7: Product: USB Keyboard
[ 64.614590] usb 1-7: Manufacturer: NOVATEK
[ 64.732884] usb 1-8: new low-speed USB device number 8 using xhci_hcd
[ 64.876090] usb 1-8: New USB device found, idVendor=0461, idProduct=4d20
[ 64.876091] usb 1-8: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 64.876105] usb 1-8: Product: USB Optical Mouse
[ 64.996676] usb 1-9: new full-speed USB device number 9 using xhci_hcd
[ 65.140467] usb 1-9: New USB device found, idVendor=046d, idProduct=c52b
[ 65.140468] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 65.140481] usb 1-9: Product: USB Receiver
[ 65.140482] usb 1-9: Manufacturer: Logitech
[ 65.157630] usbcore: registered new interface driver btusb
[ 65.170934] Bluetooth: hci0: read Intel version: 3707100100012d0d25
[ 65.170935] Bluetooth: hci0: Intel device is already patched. patch num: 25
[ 65.171867] usbcore: registered new interface driver usbhid
[ 65.171868] usbhid: USB HID core driver
[ 65.174647] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:0461:0010.0001/input/input14
[ 65.181268] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9/input2
[ 65.223752] Bluetooth: RFCOMM TTY layer initialized
[ 65.223756] Bluetooth: RFCOMM socket layer initialized
[ 65.223759] Bluetooth: RFCOMM ver 1.11
[ 65.232487] hid-generic 0003:0461:0010.0001: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-7/input0
[ 65.232583] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:0461:0010.0002/input/input15
[ 65.292465] hid-generic 0003:0461:0010.0002: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-7/input1
[ 65.292547] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:0461:4D20.0003/input/input16
[ 65.292613] hid-generic 0003:0461:4D20.0003: input,hidraw3: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-8/input0
[ 65.324082] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:046D:C52B.0006/0003:046D:404D.0007/input/input17
[ 65.324396] logitech-hidpp-device 0003:046D:404D.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-9:1
[ 856.863901] sdb: sdb1
[ 904.401583] sdb: sdb1
[ 904.429967] sdc: sdc1
[ 1012.431351] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 7278.122391] sdc: sdc1
ciol@ciol-desktop:~$ Effectivement elles parlent beaucoup plus que tout à l'heure! Mais honnêtement moi pas comprendre grand chose...
Hors ligne
#24 Le 28/03/2018, à 20:00
- ??
Re : Bios et lancement ubuntu lent [RESOLU]
Peut-être que le problème est là
[ 12.192355] Bluetooth: BNEP socket layer initialized
[ 22.100201] usb 1-3: device descriptor read/64, error -110
[ 22.328126] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ 27.476201] usb 1-3: device descriptor read/64, error -110
[ 42.981451] usb 1-3: device descriptor read/64, error -110
[ 43.205757] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 48.169181] usb 1-3: device descriptor read/8, error -110
[ 53.513423] usb 1-3: device descriptor read/8, error -110
[ 53.740074] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[ 58.873836] usb 1-3: device descriptor read/8, error -110
[ 64.241681] usb 1-3: device descriptor read/8, error -110
[ 64.349249] usb usb1-port3: unable to enumerate USB device
[ 64.469137] usb 1-7: new low-speed USB device number 7 using xhci_hcd
[ 64.614575] usb 1-7: New USB device found, idVendor=0461, idProduct=0010
[ 64.614576] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 64.614589] usb 1-7: Product: USB Keyboard
[ 64.614590] usb 1-7: Manufacturer: NOVATEKSi tu bootais sans la clé USB connectée????
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#25 Le 28/03/2018, à 20:32
- luciolz
Re : Bios et lancement ubuntu lent [RESOLU]
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
ciol@ciol-desktop:~$ dmesg | head -750
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
[ 0.000000] Linux version 4.13.0-37-generic (buildd@lcy01-amd64-012) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #42~16.04.1-Ubuntu SMP Wed Mar 7 16:03:28 UTC 2018 (Ubuntu 4.13.0-37.42~16.04.1-generic 4.13.13)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007238bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007238c000-0x000000007238cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007238d000-0x00000000723b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000723b7000-0x0000000072408fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000072409000-0x0000000072985fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000072986000-0x0000000076e59fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076e5a000-0x00000000777b2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000777b3000-0x0000000077f99fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077f9a000-0x0000000077ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000175ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H110M-ITX/ac, BIOS P7.20 03/01/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x176000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0079000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0078800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fc600-0x000fc60f] mapped at [ffff9276000fc600]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff927600096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x12fd2a000, 0x12fd2afff] PGTABLE
[ 0.000000] BRK [0x12fd2b000, 0x12fd2bfff] PGTABLE
[ 0.000000] BRK [0x12fd2c000, 0x12fd2cfff] PGTABLE
[ 0.000000] BRK [0x12fd2d000, 0x12fd2dfff] PGTABLE
[ 0.000000] BRK [0x12fd2e000, 0x12fd2efff] PGTABLE
[ 0.000000] BRK [0x12fd2f000, 0x12fd2ffff] PGTABLE
[ 0.000000] BRK [0x12fd30000, 0x12fd30fff] PGTABLE
[ 0.000000] BRK [0x12fd31000, 0x12fd31fff] PGTABLE
[ 0.000000] BRK [0x12fd32000, 0x12fd32fff] PGTABLE
[ 0.000000] BRK [0x12fd33000, 0x12fd33fff] PGTABLE
[ 0.000000] BRK [0x12fd34000, 0x12fd34fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31f5a000-0x34fa4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x0000000077F31098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000077F52020 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x0000000077F311D8 020E46 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000077F99F80 000040
[ 0.000000] ACPI: APIC 0x0000000077F52130 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000077F521B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000077F52200 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x0000000077F522A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000077F522E0 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x0000000077F52318 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x0000000077F52688 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000077F52720 00002B (v02 INTEL UsbCTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x0000000077F52750 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x0000000077F52788 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000077F527E0 0005EF (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.000000] ACPI: AAFT 0x0000000077F52DD0 00023D (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x0000000077F53010 005212 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000077F58228 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x0000000077F58270 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x0000000077F590C8 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000175ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x175fd5000-0x175ffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000175ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007238bfff]
[ 0.000000] node 0: [mem 0x00000000723b7000-0x0000000072408fff]
[ 0.000000] node 0: [mem 0x0000000072986000-0x0000000076e59fff]
[ 0.000000] node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000175ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000175ffffff]
[ 0.000000] On node 0 totalpages: 968782
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7523 pages used for memmap
[ 0.000000] DMA32 zone: 481459 pages, LIFO batch:31
[ 0.000000] Normal zone: 7552 pages used for memmap
[ 0.000000] Normal zone: 483328 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x0000000088ffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7238c000-0x7238cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7238d000-0x723b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x72409000-0x72985fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76e5a000-0x777b2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x777b3000-0x77f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77f9a000-0x77ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79000000-0x88ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x89000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff927775c00000 s146520 r8192 d29608 u524288
[ 0.000000] pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 953622
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3671384K/3875128K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 203744K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37832 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Detected 3700.000 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=14784000)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.018732] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
[ 0.018736] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
[ 0.018756] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170531/tbxfload-228)
[ 0.023747] ACPI Error: 1 table load failures, 5 successful (20170531/tbxfload-246)
[ 0.023763] Security Framework initialized
[ 0.023764] Yama: becoming mindful.
[ 0.023775] AppArmor: AppArmor initialized
[ 0.024470] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024798] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024812] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024823] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024946] CPU: Physical Processor ID: 0
[ 0.024946] CPU: Processor Core ID: 0
[ 0.024950] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024950] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024952] FEATURE SPEC_CTRL Present
[ 0.024954] mce: CPU supports 8 MCE banks
[ 0.024959] CPU0: Thermal monitoring enabled (TM1)
[ 0.024969] process: using mwait in idle threads
[ 0.024971] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.024971] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.024972] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.024972] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[ 0.024973] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled
[ 0.024973] Spectre V2 mitigation: Filling RSB on context switch
[ 0.025403] Freeing SMP alternatives memory: 36K
[ 0.026332] smpboot: Max logical packages: 2
[ 0.026335] DMAR: Host address width 39
[ 0.026336] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.026341] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.026341] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.026344] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.026344] DMAR: RMRR base: 0x00000077555000 end: 0x00000077574fff
[ 0.026345] DMAR: RMRR base: 0x00000078800000 end: 0x00000088ffffff
[ 0.026347] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.026347] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.026348] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.026348] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.027751] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.027752] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.031749] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071468] TSC deadline timer enabled
[ 0.071473] smpboot: CPU0: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.071517] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.071537] ... version: 4
[ 0.071537] ... bit width: 48
[ 0.071537] ... generic registers: 4
[ 0.071538] ... value mask: 0000ffffffffffff
[ 0.071538] ... max period: 00007fffffffffff
[ 0.071538] ... fixed-purpose events: 3
[ 0.071539] ... event mask: 000000070000000f
[ 0.071566] Hierarchical SRCU implementation.
[ 0.072000] smp: Bringing up secondary CPUs ...
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072000] #2 #3
[ 0.072000] smp: Brought up 1 node, 4 CPUs
[ 0.072000] smpboot: Total of 4 processors activated (29568.00 BogoMIPS)
[ 0.072155] devtmpfs: initialized
[ 0.072155] x86/mm: Memory block size: 128MB
[ 0.072236] evm: security.selinux
[ 0.072236] evm: security.SMACK64
[ 0.072237] evm: security.SMACK64EXEC
[ 0.072237] evm: security.SMACK64TRANSMUTE
[ 0.072237] evm: security.SMACK64MMAP
[ 0.072238] evm: security.ima
[ 0.072238] evm: security.capability
[ 0.072245] PM: Registering ACPI NVS region [mem 0x7238c000-0x7238cfff] (4096 bytes)
[ 0.072245] PM: Registering ACPI NVS region [mem 0x777b3000-0x77f99fff] (8286208 bytes)
[ 0.072245] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072245] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.072245] pinctrl core: initialized pinctrl subsystem
[ 0.072271] RTC time: 18:23:10, date: 03/28/18
[ 0.072319] NET: Registered protocol family 16
[ 0.072430] cpuidle: using governor ladder
[ 0.072430] cpuidle: using governor menu
[ 0.072430] PCCT header not found.
[ 0.072430] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.072430] ACPI: bus type PCI registered
[ 0.072430] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.072430] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.072430] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.072430] PCI: Using configuration type 1 for base access
[ 0.072557] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072557] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072557] ACPI: Added _OSI(Module Device)
[ 0.072557] ACPI: Added _OSI(Processor Device)
[ 0.072557] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072557] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072577] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.081041] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.083353] ACPI: Dynamic OEM Table Load:
[ 0.083362] ACPI: SSDT 0xFFFF9277705D2000 000726 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.083570] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.084618] ACPI: Dynamic OEM Table Load:
[ 0.084621] ACPI: SSDT 0xFFFF9277706A3400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.085266] ACPI: Dynamic OEM Table Load:
[ 0.085269] ACPI: SSDT 0xFFFF9277705D3800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.085634] ACPI: Dynamic OEM Table Load:
[ 0.085636] ACPI: SSDT 0xFFFF92777069D400 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.087751] ACPI: Interpreter enabled
[ 0.087777] ACPI: (supports S0 S3 S4 S5)
[ 0.087777] ACPI: Using IOAPIC for interrupt routing
[ 0.087829] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.088384] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.091568] ACPI: Power Resource [WRST] (off)
[ 0.091793] ACPI: Power Resource [WRST] (off)
[ 0.092000] ACPI: Power Resource [WRST] (off)
[ 0.092214] ACPI: Power Resource [WRST] (off)
[ 0.092422] ACPI: Power Resource [WRST] (off)
[ 0.092633] ACPI: Power Resource [WRST] (off)
[ 0.092844] ACPI: Power Resource [WRST] (off)
[ 0.093051] ACPI: Power Resource [WRST] (off)
[ 0.093263] ACPI: Power Resource [WRST] (off)
[ 0.093472] ACPI: Power Resource [WRST] (off)
[ 0.093678] ACPI: Power Resource [WRST] (off)
[ 0.093887] ACPI: Power Resource [WRST] (off)
[ 0.094092] ACPI: Power Resource [WRST] (off)
[ 0.094300] ACPI: Power Resource [WRST] (off)
[ 0.094506] ACPI: Power Resource [WRST] (off)
[ 0.094714] ACPI: Power Resource [WRST] (off)
[ 0.094924] ACPI: Power Resource [WRST] (off)
[ 0.095137] ACPI: Power Resource [WRST] (off)
[ 0.095345] ACPI: Power Resource [WRST] (off)
[ 0.095552] ACPI: Power Resource [WRST] (off)
[ 0.103855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.103859] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.105007] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.105007] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.105468] PCI host bridge to bus 0000:00
[ 0.105469] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.105470] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.105471] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.105472] pci_bus 0000:00: root bus resource [mem 0x89000000-0xdfffffff window]
[ 0.105473] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.105474] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.105479] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[ 0.105695] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.105702] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.105706] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.105709] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.105851] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.105871] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
[ 0.105931] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.106021] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.106041] pci 0000:00:14.2: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
[ 0.106172] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.106195] pci 0000:00:16.0: reg 0x10: [mem 0xdf14d000-0xdf14dfff 64bit]
[ 0.106259] pci 0000:00:16.0: PME# supported from D3hot
[ 0.106362] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.106377] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
[ 0.106384] pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
[ 0.106390] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.106397] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.106403] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.106410] pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
[ 0.106445] pci 0000:00:17.0: PME# supported from D3hot
[ 0.106540] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.106603] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.106727] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.106784] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.106907] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[ 0.107089] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.107104] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
[ 0.107233] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.107259] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[ 0.107289] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[ 0.107334] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.107460] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.107519] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
[ 0.107588] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.107745] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.107771] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
[ 0.107875] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.107991] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.108058] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
[ 0.108113] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
[ 0.108291] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.108412] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.108416] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.109601] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109636] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.109671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109704] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109772] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109806] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109839] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110148] SCSI subsystem initialized
[ 0.110155] libata version 3.00 loaded.
[ 0.110155] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.110155] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.110155] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.110155] vgaarb: loaded
[ 0.110155] ACPI: bus type USB registered
[ 0.110155] usbcore: registered new interface driver usbfs
[ 0.110155] usbcore: registered new interface driver hub
[ 0.110155] usbcore: registered new device driver usb
[ 0.110155] EDAC MC: Ver: 3.0.0
[ 0.110155] PCI: Using ACPI for IRQ routing
[ 0.137249] PCI: pci_cache_line_size set to 64 bytes
[ 0.137286] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.137287] e820: reserve RAM buffer [mem 0x7238c000-0x73ffffff]
[ 0.137288] e820: reserve RAM buffer [mem 0x72409000-0x73ffffff]
[ 0.137288] e820: reserve RAM buffer [mem 0x76e5a000-0x77ffffff]
[ 0.137289] e820: reserve RAM buffer [mem 0x176000000-0x177ffffff]
[ 0.137337] NetLabel: Initializing
[ 0.137337] NetLabel: domain hash size = 128
[ 0.137337] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.137345] NetLabel: unlabeled traffic allowed by default
[ 0.137352] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.137352] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.140004] clocksource: Switched to clocksource hpet
[ 0.145829] VFS: Disk quotas dquot_6.6.0
[ 0.145839] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.145898] AppArmor: AppArmor Filesystem Enabled
[ 0.145921] pnp: PnP ACPI init
[ 0.146155] system 00:00: [io 0x0280-0x028f] has been reserved
[ 0.146156] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.146157] system 00:00: [io 0x02a0-0x02af] has been reserved
[ 0.146158] system 00:00: [io 0x02b0-0x02bf] has been reserved
[ 0.146160] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146262] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.146263] system 00:01: [io 0xffff] has been reserved
[ 0.146264] system 00:01: [io 0xffff] has been reserved
[ 0.146265] system 00:01: [io 0xffff] has been reserved
[ 0.146266] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.146267] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.146269] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146321] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.146323] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146336] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146355] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.146356] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.146505] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.146506] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.146507] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.146508] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.146509] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.146510] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.146511] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.146512] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.146513] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.146514] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.146516] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146539] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.146540] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.146541] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.146542] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.146543] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.146544] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.146545] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.146546] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146730] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.146731] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147428] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.147429] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.147430] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.147431] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147959] pnp: PnP ACPI: found 9 devices
[ 0.155101] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.155115] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.155124] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.155127] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.155132] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.155133] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.155134] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.155135] pci_bus 0000:00: resource 7 [mem 0x89000000-0xdfffffff window]
[ 0.155136] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.155137] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[ 0.155225] NET: Registered protocol family 2
[ 0.155311] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.155359] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.155429] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.155449] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155459] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155487] NET: Registered protocol family 1
[ 0.155494] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.156101] PCI: CLS 0 bytes, default 64
[ 0.156121] Unpacking initramfs...
[ 0.638839] Freeing initrd memory: 49452K
[ 0.638902] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.638904] software IO TLB [mem 0x72e5a000-0x76e5a000] (64MB) mapped at [ffff927672e5a000-ffff927676e59fff]
[ 0.639062] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[ 0.639153] Scanning for low memory corruption every 60 seconds
[ 0.639391] audit: initializing netlink subsys (disabled)
[ 0.639441] audit: type=2000 audit(1522261390.639:1): state=initialized audit_enabled=0 res=1
[ 0.639666] Initialise system trusted keyrings
[ 0.639672] Key type blacklist registered
[ 0.639721] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.640388] zbud: loaded
[ 0.640703] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.640845] fuse init (API version 7.26)
[ 0.643065] Key type asymmetric registered
[ 0.643066] Asymmetric key parser 'x509' registered
[ 0.643085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.643126] io scheduler noop registered
[ 0.643126] io scheduler deadline registered
[ 0.643141] io scheduler cfq registered (default)
[ 0.643557] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.643569] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 0.643606] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.643606] vesafb: scrolling: redraw
[ 0.643607] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.643613] vesafb: framebuffer at 0xc0000000, mapped to 0xffffa93541000000, using 5632k, total 5632k
[ 0.643675] Console: switching to colour frame buffer device 200x56
[ 0.643686] fb0: VESA VGA frame buffer device
[ 0.643692] intel_idle: MWAIT substates: 0x142120
[ 0.643693] intel_idle: v0.4.1 model 0x5E
[ 0.643821] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.643903] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.643911] ACPI: Sleep Button [SLPB]
[ 0.643928] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.643935] ACPI: Power Button [PWRB]
[ 0.643951] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.644022] ACPI: Power Button [PWRF]
[ 0.644163] GHES: HEST is not enabled!
[ 0.644232] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.645785] Linux agpgart interface v0.103
[ 0.646822] loop: module loaded
[ 0.646907] libphy: Fixed MDIO Bus: probed
[ 0.646908] tun: Universal TUN/TAP device driver, 1.6
[ 0.646946] PPP generic driver version 2.4.2
[ 0.646998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.646999] ehci-pci: EHCI PCI platform driver
[ 0.647004] ehci-platform: EHCI generic platform driver
[ 0.647009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.647009] ohci-pci: OHCI PCI platform driver
[ 0.647013] ohci-platform: OHCI generic platform driver
[ 0.647016] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.647121] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.647124] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.648209] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.648213] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.648284] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.648285] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648286] usb usb1: Product: xHCI Host Controller
[ 0.648287] usb usb1: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.648287] usb usb1: SerialNumber: 0000:00:14.0
[ 0.648393] hub 1-0:1.0: USB hub found
[ 0.648404] hub 1-0:1.0: 10 ports detected
[ 0.648531] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.648533] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.648552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.648553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648554] usb usb2: Product: xHCI Host Controller
[ 0.648555] usb usb2: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.648555] usb usb2: SerialNumber: 0000:00:14.0
[ 0.648651] hub 2-0:1.0: USB hub found
[ 0.648657] hub 2-0:1.0: 4 ports detected
[ 0.648774] i8042: PNP: No PS/2 controller found.
[ 0.648909] mousedev: PS/2 mouse device common for all mice
[ 0.649203] rtc_cmos 00:03: RTC can wake from S4
[ 0.649599] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.649679] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.649681] i2c /dev entries driver
[ 0.649706] device-mapper: uevent: version 1.0.3
[ 0.649786] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.649788] intel_pstate: Intel P-state driver initializing
[ 0.650168] intel_pstate: HWP enabled
[ 0.650274] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.650708] NET: Registered protocol family 10
[ 0.654054] Segment Routing with IPv6
[ 0.654066] NET: Registered protocol family 17
[ 0.654071] Key type dns_resolver registered
[ 0.654607] RAS: Correctable Errors collector initialized.
[ 0.654664] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[ 0.654794] microcode: Microcode Update Driver: v2.2.
[ 0.654913] sched_clock: Marking stable (654792646, 0)->(655040117, -247471)
[ 0.655174] registered taskstats version 1
[ 0.655179] Loading compiled-in X.509 certificates
[ 0.656629] Loaded X.509 cert 'Build time autogenerated kernel key: 039842e4c5826cfde4aee35bb7ba969e0b39b60f'
[ 0.656640] zswap: loaded using pool lzo/zbud
[ 0.658771] Key type big_key registered
[ 0.658773] Key type trusted registered
[ 0.659713] Key type encrypted registered
[ 0.659715] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.659717] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.659730] evm: HMAC attrs: 0x1
[ 0.660228] Magic number: 10:817:393
[ 0.660431] rtc_cmos 00:03: setting system clock to 2018-03-28 18:23:11 UTC (1522261391)
[ 0.660487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.660488] EDD information not available.
[ 0.660512] PM: Hibernation image not present or could not be loaded.
[ 0.661762] Freeing unused kernel memory: 2364K
[ 0.661762] Write protecting the kernel read-only data: 18432k
[ 0.662126] Freeing unused kernel memory: 2024K
[ 0.662275] Freeing unused kernel memory: 88K
[ 0.663355] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.663355] x86/mm: Checking user space page tables
[ 0.664385] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.701497] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.737304] ahci 0000:00:17.0: version 3.0
[ 0.737480] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 0.737482] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.737774] pps_core: LinuxPPS API ver. 1 registered
[ 0.737775] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.738981] PTP clock support registered
[ 0.741614] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.741615] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.776351] scsi host0: ahci
[ 0.776437] scsi host1: ahci
[ 0.776523] scsi host2: ahci
[ 0.776611] scsi host3: ahci
[ 0.776638] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 125
[ 0.776642] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 125
[ 0.776646] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 125
[ 0.776651] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 125
[ 0.776863] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.976058] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 0.979256] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.047284] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:3c:25:99
[ 1.047286] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.047360] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.047800] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.050060] [drm] Memory usable by graphics device = 4096M
[ 1.050061] checking generic (c0000000 580000) vs hw (c0000000 10000000)
[ 1.050062] fb: switching to inteldrmfb from VESA VGA
[ 1.050076] Console: switching to colour dummy device 80x25
[ 1.050261] [drm] Replacing VGA console driver
[ 1.055676] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.055677] [drm] Driver supports precise vblank timestamp query.
[ 1.062108] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.063025] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.064211] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 1.065328] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.065696] acpi device:0f: registered as cooling_device4
[ 1.065755] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.092716] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.092736] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.092754] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.092775] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.093158] ata1.00: ATA-11: KINGSTON SUV400S37240G, 0C3G37R5, max UDMA/133
[ 1.093160] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.093961] ata1.00: configured for UDMA/133
[ 1.094043] ata2.00: ATA-7: Hitachi HDT725050VLA380, V56OA73A, max UDMA/133
[ 1.094044] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.094085] ata3.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
[ 1.094086] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.094213] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S 37R5 PQ: 0 ANSI: 5
[ 1.095515] ata2.00: configured for UDMA/133
[ 1.095739] ata3.00: configured for UDMA/133
[ 1.117819] usb 1-2: New USB device found, idVendor=8087, idProduct=07dc
[ 1.117820] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.132411] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.132608] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.132609] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.132622] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72505 A73A PQ: 0 ANSI: 5
[ 1.132624] sd 0:0:0:0: [sda] Write Protect is off
[ 1.132626] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.132658] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.133343] sda: sda1 sda2 < sda5 >
[ 1.133833] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.164248] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.164344] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.164361] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.164362] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.164403] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.164468] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
[ 1.180265] sdb: sdb1
[ 1.180667] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.200134] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.200219] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.200220] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.200249] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.200250] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.200291] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.236027] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 1.250794] sdc: sdc1
[ 1.251244] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.660105] clocksource: Switched to clocksource tsc
[ 1.841010] fbcon: inteldrmfb (fb0) is primary device
[ 1.841063] Console: switching to colour frame buffer device 200x56
[ 1.841076] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.812441] [drm] RC6 on
[ 6.484131] usb 1-3: device descriptor read/64, error -110
[ 7.193784] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.284791] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.284891] systemd[1]: Detected architecture x86-64.
[ 7.285054] systemd[1]: Set hostname to <ciol-desktop>.
[ 7.340245] systemd[1]: Created slice User and Session Slice.
[ 7.340303] systemd[1]: Listening on Journal Socket.
[ 7.340314] systemd[1]: Reached target User and Group Name Lookups.
[ 7.340356] systemd[1]: Listening on Journal Audit Socket.
[ 7.340369] systemd[1]: Listening on Syslog Socket.
[ 7.340390] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.340404] systemd[1]: Listening on udev Kernel Socket.
[ 7.372699] lp: driver loaded but no devices found
[ 7.375858] ppdev: user-space parallel port driver
[ 7.417203] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.424338] systemd-journald[268]: Received request to flush runtime journal from PID 1
[ 7.514696] Bluetooth: Core ver 2.22
[ 7.514704] NET: Registered protocol family 31
[ 7.514704] Bluetooth: HCI device and connection manager initialized
[ 7.514707] Bluetooth: HCI socket layer initialized
[ 7.514708] Bluetooth: L2CAP socket layer initialized
[ 7.514711] Bluetooth: SCO socket layer initialized
[ 7.520822] Bluetooth: HCI UART driver ver 2.3
[ 7.520824] Bluetooth: HCI UART protocol H4 registered
[ 7.520824] Bluetooth: HCI UART protocol BCSP registered
[ 7.520841] Bluetooth: HCI UART protocol LL registered
[ 7.520842] Bluetooth: HCI UART protocol ATH3K registered
[ 7.520842] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 7.520860] Bluetooth: HCI UART protocol Intel registered
[ 7.520869] Bluetooth: HCI UART protocol Broadcom registered
[ 7.520870] Bluetooth: HCI UART protocol QCA registered
[ 7.520870] Bluetooth: HCI UART protocol AG6XX registered
[ 7.520871] Bluetooth: HCI UART protocol Marvell registered
[ 7.521785] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.524584] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 7.525839] random: crng init done
[ 7.537870] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.560459] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 7.560461] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 7.560461] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 7.560462] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 7.560462] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 7.560463] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 7.571581] AVX2 version of gcm_enc/dec engaged.
[ 7.571582] AES CTR mode by8 optimization enabled
[ 7.580766] Intel(R) Wireless WiFi driver for Linux
[ 7.580767] Copyright(c) 2003- 2015 Intel Corporation
[ 7.594006] iwlwifi 0000:02:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
[ 7.628052] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 7.631276] intel_rapl: Found RAPL domain package
[ 7.631277] intel_rapl: Found RAPL domain core
[ 7.631278] intel_rapl: Found RAPL domain uncore
[ 7.631279] intel_rapl: Found RAPL domain dram
[ 7.645433] iwlwifi 0000:02:00.0: base HW address: f4:06:69:f1:23:04
[ 7.761399] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.762377] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.792055] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 7.795595] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 7.846689] Adding 3874812k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:3874812k SSFS
[ 7.881394] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.914686] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.914688] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.914689] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.914690] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.914690] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.914691] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.914692] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.914693] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.931257] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 7.931301] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 7.931347] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 7.931389] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 7.931430] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 7.931467] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 7.931509] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 7.931548] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 7.931588] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
ciol@ciol-desktop:~$ dmesg | head -1500 | tail -750
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x89000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff927775c00000 s146520 r8192 d29608 u524288
[ 0.000000] pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 953622
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3671384K/3875128K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 203744K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37832 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Detected 3700.000 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=14784000)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.018732] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
[ 0.018736] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
[ 0.018756] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170531/tbxfload-228)
[ 0.023747] ACPI Error: 1 table load failures, 5 successful (20170531/tbxfload-246)
[ 0.023763] Security Framework initialized
[ 0.023764] Yama: becoming mindful.
[ 0.023775] AppArmor: AppArmor initialized
[ 0.024470] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024798] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024812] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024823] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024946] CPU: Physical Processor ID: 0
[ 0.024946] CPU: Processor Core ID: 0
[ 0.024950] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024950] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024952] FEATURE SPEC_CTRL Present
[ 0.024954] mce: CPU supports 8 MCE banks
[ 0.024959] CPU0: Thermal monitoring enabled (TM1)
[ 0.024969] process: using mwait in idle threads
[ 0.024971] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.024971] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.024972] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.024972] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[ 0.024973] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled
[ 0.024973] Spectre V2 mitigation: Filling RSB on context switch
[ 0.025403] Freeing SMP alternatives memory: 36K
[ 0.026332] smpboot: Max logical packages: 2
[ 0.026335] DMAR: Host address width 39
[ 0.026336] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.026341] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.026341] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.026344] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.026344] DMAR: RMRR base: 0x00000077555000 end: 0x00000077574fff
[ 0.026345] DMAR: RMRR base: 0x00000078800000 end: 0x00000088ffffff
[ 0.026347] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.026347] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.026348] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.026348] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.027751] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.027752] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.031749] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071468] TSC deadline timer enabled
[ 0.071473] smpboot: CPU0: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.071517] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.071537] ... version: 4
[ 0.071537] ... bit width: 48
[ 0.071537] ... generic registers: 4
[ 0.071538] ... value mask: 0000ffffffffffff
[ 0.071538] ... max period: 00007fffffffffff
[ 0.071538] ... fixed-purpose events: 3
[ 0.071539] ... event mask: 000000070000000f
[ 0.071566] Hierarchical SRCU implementation.
[ 0.072000] smp: Bringing up secondary CPUs ...
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072000] #2 #3
[ 0.072000] smp: Brought up 1 node, 4 CPUs
[ 0.072000] smpboot: Total of 4 processors activated (29568.00 BogoMIPS)
[ 0.072155] devtmpfs: initialized
[ 0.072155] x86/mm: Memory block size: 128MB
[ 0.072236] evm: security.selinux
[ 0.072236] evm: security.SMACK64
[ 0.072237] evm: security.SMACK64EXEC
[ 0.072237] evm: security.SMACK64TRANSMUTE
[ 0.072237] evm: security.SMACK64MMAP
[ 0.072238] evm: security.ima
[ 0.072238] evm: security.capability
[ 0.072245] PM: Registering ACPI NVS region [mem 0x7238c000-0x7238cfff] (4096 bytes)
[ 0.072245] PM: Registering ACPI NVS region [mem 0x777b3000-0x77f99fff] (8286208 bytes)
[ 0.072245] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072245] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.072245] pinctrl core: initialized pinctrl subsystem
[ 0.072271] RTC time: 18:23:10, date: 03/28/18
[ 0.072319] NET: Registered protocol family 16
[ 0.072430] cpuidle: using governor ladder
[ 0.072430] cpuidle: using governor menu
[ 0.072430] PCCT header not found.
[ 0.072430] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.072430] ACPI: bus type PCI registered
[ 0.072430] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.072430] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.072430] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.072430] PCI: Using configuration type 1 for base access
[ 0.072557] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.072557] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.072557] ACPI: Added _OSI(Module Device)
[ 0.072557] ACPI: Added _OSI(Processor Device)
[ 0.072557] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072557] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072577] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.081041] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.083353] ACPI: Dynamic OEM Table Load:
[ 0.083362] ACPI: SSDT 0xFFFF9277705D2000 000726 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.083570] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.084618] ACPI: Dynamic OEM Table Load:
[ 0.084621] ACPI: SSDT 0xFFFF9277706A3400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.085266] ACPI: Dynamic OEM Table Load:
[ 0.085269] ACPI: SSDT 0xFFFF9277705D3800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.085634] ACPI: Dynamic OEM Table Load:
[ 0.085636] ACPI: SSDT 0xFFFF92777069D400 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.087751] ACPI: Interpreter enabled
[ 0.087777] ACPI: (supports S0 S3 S4 S5)
[ 0.087777] ACPI: Using IOAPIC for interrupt routing
[ 0.087829] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.088384] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.091568] ACPI: Power Resource [WRST] (off)
[ 0.091793] ACPI: Power Resource [WRST] (off)
[ 0.092000] ACPI: Power Resource [WRST] (off)
[ 0.092214] ACPI: Power Resource [WRST] (off)
[ 0.092422] ACPI: Power Resource [WRST] (off)
[ 0.092633] ACPI: Power Resource [WRST] (off)
[ 0.092844] ACPI: Power Resource [WRST] (off)
[ 0.093051] ACPI: Power Resource [WRST] (off)
[ 0.093263] ACPI: Power Resource [WRST] (off)
[ 0.093472] ACPI: Power Resource [WRST] (off)
[ 0.093678] ACPI: Power Resource [WRST] (off)
[ 0.093887] ACPI: Power Resource [WRST] (off)
[ 0.094092] ACPI: Power Resource [WRST] (off)
[ 0.094300] ACPI: Power Resource [WRST] (off)
[ 0.094506] ACPI: Power Resource [WRST] (off)
[ 0.094714] ACPI: Power Resource [WRST] (off)
[ 0.094924] ACPI: Power Resource [WRST] (off)
[ 0.095137] ACPI: Power Resource [WRST] (off)
[ 0.095345] ACPI: Power Resource [WRST] (off)
[ 0.095552] ACPI: Power Resource [WRST] (off)
[ 0.103855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.103859] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.105007] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.105007] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.105468] PCI host bridge to bus 0000:00
[ 0.105469] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.105470] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.105471] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.105472] pci_bus 0000:00: root bus resource [mem 0x89000000-0xdfffffff window]
[ 0.105473] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.105474] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.105479] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[ 0.105695] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.105702] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.105706] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.105709] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.105851] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.105871] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
[ 0.105931] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.106021] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.106041] pci 0000:00:14.2: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
[ 0.106172] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.106195] pci 0000:00:16.0: reg 0x10: [mem 0xdf14d000-0xdf14dfff 64bit]
[ 0.106259] pci 0000:00:16.0: PME# supported from D3hot
[ 0.106362] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.106377] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
[ 0.106384] pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
[ 0.106390] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.106397] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.106403] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.106410] pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
[ 0.106445] pci 0000:00:17.0: PME# supported from D3hot
[ 0.106540] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.106603] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.106727] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.106784] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.106907] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[ 0.107089] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.107104] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
[ 0.107233] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.107259] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[ 0.107289] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[ 0.107334] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.107460] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.107519] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
[ 0.107588] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.107745] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.107771] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
[ 0.107875] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.107991] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.108058] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
[ 0.108113] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
[ 0.108291] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.108412] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.108416] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.109601] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109636] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.109671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109704] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109772] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109806] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.109839] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.110148] SCSI subsystem initialized
[ 0.110155] libata version 3.00 loaded.
[ 0.110155] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.110155] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.110155] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.110155] vgaarb: loaded
[ 0.110155] ACPI: bus type USB registered
[ 0.110155] usbcore: registered new interface driver usbfs
[ 0.110155] usbcore: registered new interface driver hub
[ 0.110155] usbcore: registered new device driver usb
[ 0.110155] EDAC MC: Ver: 3.0.0
[ 0.110155] PCI: Using ACPI for IRQ routing
[ 0.137249] PCI: pci_cache_line_size set to 64 bytes
[ 0.137286] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.137287] e820: reserve RAM buffer [mem 0x7238c000-0x73ffffff]
[ 0.137288] e820: reserve RAM buffer [mem 0x72409000-0x73ffffff]
[ 0.137288] e820: reserve RAM buffer [mem 0x76e5a000-0x77ffffff]
[ 0.137289] e820: reserve RAM buffer [mem 0x176000000-0x177ffffff]
[ 0.137337] NetLabel: Initializing
[ 0.137337] NetLabel: domain hash size = 128
[ 0.137337] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.137345] NetLabel: unlabeled traffic allowed by default
[ 0.137352] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.137352] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.140004] clocksource: Switched to clocksource hpet
[ 0.145829] VFS: Disk quotas dquot_6.6.0
[ 0.145839] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.145898] AppArmor: AppArmor Filesystem Enabled
[ 0.145921] pnp: PnP ACPI init
[ 0.146155] system 00:00: [io 0x0280-0x028f] has been reserved
[ 0.146156] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.146157] system 00:00: [io 0x02a0-0x02af] has been reserved
[ 0.146158] system 00:00: [io 0x02b0-0x02bf] has been reserved
[ 0.146160] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146262] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.146263] system 00:01: [io 0xffff] has been reserved
[ 0.146264] system 00:01: [io 0xffff] has been reserved
[ 0.146265] system 00:01: [io 0xffff] has been reserved
[ 0.146266] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.146267] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.146269] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146321] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.146323] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146336] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146355] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.146356] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.146505] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.146506] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.146507] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.146508] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.146509] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.146510] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.146511] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.146512] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.146513] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.146514] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.146516] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146539] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.146540] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.146541] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.146542] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.146543] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.146544] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.146545] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.146546] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146730] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.146731] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147428] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.147429] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.147430] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.147431] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.147959] pnp: PnP ACPI: found 9 devices
[ 0.155101] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.155115] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.155124] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.155127] pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.155132] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.155133] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.155134] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.155135] pci_bus 0000:00: resource 7 [mem 0x89000000-0xdfffffff window]
[ 0.155136] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.155137] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[ 0.155225] NET: Registered protocol family 2
[ 0.155311] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.155359] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.155429] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.155449] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155459] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.155487] NET: Registered protocol family 1
[ 0.155494] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.156101] PCI: CLS 0 bytes, default 64
[ 0.156121] Unpacking initramfs...
[ 0.638839] Freeing initrd memory: 49452K
[ 0.638902] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.638904] software IO TLB [mem 0x72e5a000-0x76e5a000] (64MB) mapped at [ffff927672e5a000-ffff927676e59fff]
[ 0.639062] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[ 0.639153] Scanning for low memory corruption every 60 seconds
[ 0.639391] audit: initializing netlink subsys (disabled)
[ 0.639441] audit: type=2000 audit(1522261390.639:1): state=initialized audit_enabled=0 res=1
[ 0.639666] Initialise system trusted keyrings
[ 0.639672] Key type blacklist registered
[ 0.639721] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.640388] zbud: loaded
[ 0.640703] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.640845] fuse init (API version 7.26)
[ 0.643065] Key type asymmetric registered
[ 0.643066] Asymmetric key parser 'x509' registered
[ 0.643085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.643126] io scheduler noop registered
[ 0.643126] io scheduler deadline registered
[ 0.643141] io scheduler cfq registered (default)
[ 0.643557] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.643569] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 0.643606] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.643606] vesafb: scrolling: redraw
[ 0.643607] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.643613] vesafb: framebuffer at 0xc0000000, mapped to 0xffffa93541000000, using 5632k, total 5632k
[ 0.643675] Console: switching to colour frame buffer device 200x56
[ 0.643686] fb0: VESA VGA frame buffer device
[ 0.643692] intel_idle: MWAIT substates: 0x142120
[ 0.643693] intel_idle: v0.4.1 model 0x5E
[ 0.643821] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.643903] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.643911] ACPI: Sleep Button [SLPB]
[ 0.643928] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.643935] ACPI: Power Button [PWRB]
[ 0.643951] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.644022] ACPI: Power Button [PWRF]
[ 0.644163] GHES: HEST is not enabled!
[ 0.644232] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.645785] Linux agpgart interface v0.103
[ 0.646822] loop: module loaded
[ 0.646907] libphy: Fixed MDIO Bus: probed
[ 0.646908] tun: Universal TUN/TAP device driver, 1.6
[ 0.646946] PPP generic driver version 2.4.2
[ 0.646998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.646999] ehci-pci: EHCI PCI platform driver
[ 0.647004] ehci-platform: EHCI generic platform driver
[ 0.647009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.647009] ohci-pci: OHCI PCI platform driver
[ 0.647013] ohci-platform: OHCI generic platform driver
[ 0.647016] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.647121] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.647124] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.648209] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.648213] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.648284] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.648285] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648286] usb usb1: Product: xHCI Host Controller
[ 0.648287] usb usb1: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.648287] usb usb1: SerialNumber: 0000:00:14.0
[ 0.648393] hub 1-0:1.0: USB hub found
[ 0.648404] hub 1-0:1.0: 10 ports detected
[ 0.648531] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.648533] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.648552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.648553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648554] usb usb2: Product: xHCI Host Controller
[ 0.648555] usb usb2: Manufacturer: Linux 4.13.0-37-generic xhci-hcd
[ 0.648555] usb usb2: SerialNumber: 0000:00:14.0
[ 0.648651] hub 2-0:1.0: USB hub found
[ 0.648657] hub 2-0:1.0: 4 ports detected
[ 0.648774] i8042: PNP: No PS/2 controller found.
[ 0.648909] mousedev: PS/2 mouse device common for all mice
[ 0.649203] rtc_cmos 00:03: RTC can wake from S4
[ 0.649599] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.649679] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.649681] i2c /dev entries driver
[ 0.649706] device-mapper: uevent: version 1.0.3
[ 0.649786] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.649788] intel_pstate: Intel P-state driver initializing
[ 0.650168] intel_pstate: HWP enabled
[ 0.650274] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.650708] NET: Registered protocol family 10
[ 0.654054] Segment Routing with IPv6
[ 0.654066] NET: Registered protocol family 17
[ 0.654071] Key type dns_resolver registered
[ 0.654607] RAS: Correctable Errors collector initialized.
[ 0.654664] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[ 0.654794] microcode: Microcode Update Driver: v2.2.
[ 0.654913] sched_clock: Marking stable (654792646, 0)->(655040117, -247471)
[ 0.655174] registered taskstats version 1
[ 0.655179] Loading compiled-in X.509 certificates
[ 0.656629] Loaded X.509 cert 'Build time autogenerated kernel key: 039842e4c5826cfde4aee35bb7ba969e0b39b60f'
[ 0.656640] zswap: loaded using pool lzo/zbud
[ 0.658771] Key type big_key registered
[ 0.658773] Key type trusted registered
[ 0.659713] Key type encrypted registered
[ 0.659715] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.659717] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.659730] evm: HMAC attrs: 0x1
[ 0.660228] Magic number: 10:817:393
[ 0.660431] rtc_cmos 00:03: setting system clock to 2018-03-28 18:23:11 UTC (1522261391)
[ 0.660487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.660488] EDD information not available.
[ 0.660512] PM: Hibernation image not present or could not be loaded.
[ 0.661762] Freeing unused kernel memory: 2364K
[ 0.661762] Write protecting the kernel read-only data: 18432k
[ 0.662126] Freeing unused kernel memory: 2024K
[ 0.662275] Freeing unused kernel memory: 88K
[ 0.663355] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.663355] x86/mm: Checking user space page tables
[ 0.664385] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.701497] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.737304] ahci 0000:00:17.0: version 3.0
[ 0.737480] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 0.737482] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.737774] pps_core: LinuxPPS API ver. 1 registered
[ 0.737775] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.738981] PTP clock support registered
[ 0.741614] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.741615] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.776351] scsi host0: ahci
[ 0.776437] scsi host1: ahci
[ 0.776523] scsi host2: ahci
[ 0.776611] scsi host3: ahci
[ 0.776638] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 125
[ 0.776642] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 125
[ 0.776646] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 125
[ 0.776651] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 125
[ 0.776863] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.976058] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 0.979256] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.047284] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 70:85:c2:3c:25:99
[ 1.047286] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.047360] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.047800] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.050060] [drm] Memory usable by graphics device = 4096M
[ 1.050061] checking generic (c0000000 580000) vs hw (c0000000 10000000)
[ 1.050062] fb: switching to inteldrmfb from VESA VGA
[ 1.050076] Console: switching to colour dummy device 80x25
[ 1.050261] [drm] Replacing VGA console driver
[ 1.055676] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.055677] [drm] Driver supports precise vblank timestamp query.
[ 1.062108] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.063025] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.064211] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 1.065328] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.065696] acpi device:0f: registered as cooling_device4
[ 1.065755] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.092716] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.092736] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.092754] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.092775] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.093158] ata1.00: ATA-11: KINGSTON SUV400S37240G, 0C3G37R5, max UDMA/133
[ 1.093160] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.093961] ata1.00: configured for UDMA/133
[ 1.094043] ata2.00: ATA-7: Hitachi HDT725050VLA380, V56OA73A, max UDMA/133
[ 1.094044] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.094085] ata3.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
[ 1.094086] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.094213] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S 37R5 PQ: 0 ANSI: 5
[ 1.095515] ata2.00: configured for UDMA/133
[ 1.095739] ata3.00: configured for UDMA/133
[ 1.117819] usb 1-2: New USB device found, idVendor=8087, idProduct=07dc
[ 1.117820] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.132411] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.132608] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.132609] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.132622] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72505 A73A PQ: 0 ANSI: 5
[ 1.132624] sd 0:0:0:0: [sda] Write Protect is off
[ 1.132626] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.132658] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.133343] sda: sda1 sda2 < sda5 >
[ 1.133833] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.164248] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.164344] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.164361] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.164362] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.164403] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.164468] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
[ 1.180265] sdb: sdb1
[ 1.180667] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.200134] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.200219] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.200220] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.200249] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.200250] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.200291] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.236027] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 1.250794] sdc: sdc1
[ 1.251244] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.660105] clocksource: Switched to clocksource tsc
[ 1.841010] fbcon: inteldrmfb (fb0) is primary device
[ 1.841063] Console: switching to colour frame buffer device 200x56
[ 1.841076] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.812441] [drm] RC6 on
[ 6.484131] usb 1-3: device descriptor read/64, error -110
[ 7.193784] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.284791] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.284891] systemd[1]: Detected architecture x86-64.
[ 7.285054] systemd[1]: Set hostname to <ciol-desktop>.
[ 7.340245] systemd[1]: Created slice User and Session Slice.
[ 7.340303] systemd[1]: Listening on Journal Socket.
[ 7.340314] systemd[1]: Reached target User and Group Name Lookups.
[ 7.340356] systemd[1]: Listening on Journal Audit Socket.
[ 7.340369] systemd[1]: Listening on Syslog Socket.
[ 7.340390] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.340404] systemd[1]: Listening on udev Kernel Socket.
[ 7.372699] lp: driver loaded but no devices found
[ 7.375858] ppdev: user-space parallel port driver
[ 7.417203] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.424338] systemd-journald[268]: Received request to flush runtime journal from PID 1
[ 7.514696] Bluetooth: Core ver 2.22
[ 7.514704] NET: Registered protocol family 31
[ 7.514704] Bluetooth: HCI device and connection manager initialized
[ 7.514707] Bluetooth: HCI socket layer initialized
[ 7.514708] Bluetooth: L2CAP socket layer initialized
[ 7.514711] Bluetooth: SCO socket layer initialized
[ 7.520822] Bluetooth: HCI UART driver ver 2.3
[ 7.520824] Bluetooth: HCI UART protocol H4 registered
[ 7.520824] Bluetooth: HCI UART protocol BCSP registered
[ 7.520841] Bluetooth: HCI UART protocol LL registered
[ 7.520842] Bluetooth: HCI UART protocol ATH3K registered
[ 7.520842] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 7.520860] Bluetooth: HCI UART protocol Intel registered
[ 7.520869] Bluetooth: HCI UART protocol Broadcom registered
[ 7.520870] Bluetooth: HCI UART protocol QCA registered
[ 7.520870] Bluetooth: HCI UART protocol AG6XX registered
[ 7.520871] Bluetooth: HCI UART protocol Marvell registered
[ 7.521785] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.524584] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 7.525839] random: crng init done
[ 7.537870] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.560459] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 7.560461] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 7.560461] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 7.560462] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 7.560462] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 7.560463] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 7.571581] AVX2 version of gcm_enc/dec engaged.
[ 7.571582] AES CTR mode by8 optimization enabled
[ 7.580766] Intel(R) Wireless WiFi driver for Linux
[ 7.580767] Copyright(c) 2003- 2015 Intel Corporation
[ 7.594006] iwlwifi 0000:02:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
[ 7.628052] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[ 7.631276] intel_rapl: Found RAPL domain package
[ 7.631277] intel_rapl: Found RAPL domain core
[ 7.631278] intel_rapl: Found RAPL domain uncore
[ 7.631279] intel_rapl: Found RAPL domain dram
[ 7.645433] iwlwifi 0000:02:00.0: base HW address: f4:06:69:f1:23:04
[ 7.761399] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.762377] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.792055] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 7.795595] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 7.846689] Adding 3874812k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:3874812k SSFS
[ 7.881394] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.914686] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.914688] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.914689] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.914690] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.914690] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.914691] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.914692] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.914693] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.931257] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 7.931301] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 7.931347] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 7.931389] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 7.931430] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 7.931467] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 7.931509] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 7.931548] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 7.931588] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 7.931624] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 8.033641] WARN_ON(crtc->config->scaler_state.scaler_id < 0)
[ 8.033660] ------------[ cut here ]------------
[ 8.033689] WARNING: CPU: 2 PID: 340 at /build/linux-hwe-qx9Tq0/linux-hwe-4.13.0/drivers/gpu/drm/i915/intel_display.c:4755 skylake_pfit_enable+0xe7/0xf0 [i915]
[ 8.033689] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic arc4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm intel_rapl x86_pkg_temp_thermal intel_powerclamp iwlmvm coretemp snd_seq_midi snd_seq_midi_event mac80211 kvm_intel snd_rawmidi kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_seq snd_seq_device snd_timer iwlwifi aesni_intel aes_x86_64 crypto_simd glue_helper cryptd cfg80211 intel_cstate intel_rapl_perf snd soundcore mei_me shpchp mei intel_pch_thermal hci_uart btbcm serdev btqca btintel bluetooth ecdh_generic intel_lpss_acpi intel_lpss mac_hid acpi_pad acpi_als kfifo_buf industrialio parport_pc ppdev lp parport autofs4 i915 i2c_algo_bit drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ptp pps_core
[ 8.033712] drm ahci libahci video pinctrl_sunrisepoint pinctrl_intel i2c_hid hid
[ 8.033716] CPU: 2 PID: 340 Comm: plymouthd Not tainted 4.13.0-37-generic #42~16.04.1-Ubuntu
[ 8.033717] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./H110M-ITX/ac, BIOS P7.20 03/01/2018
[ 8.033717] task: ffff92776c82af80 task.stack: ffffa93540b14000
[ 8.033734] RIP: 0010:skylake_pfit_enable+0xe7/0xf0 [i915]
[ 8.033735] RSP: 0018:ffffa93540b17910 EFLAGS: 00010282
[ 8.033736] RAX: 0000000000000031 RBX: ffff927765ccd000 RCX: ffffffffbf4611c8
[ 8.033736] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000202
[ 8.033737] RBP: ffffa93540b17930 R08: 0000000000000031 R09: 00000000000002ef
[ 8.033737] R10: ffffffffc0545ae0 R11: 0000000000000031 R12: ffff92776586f000
[ 8.033738] R13: ffff927765af8000 R14: ffff927765af8000 R15: ffff92776c5c9800
[ 8.033739] FS: 00007f2ba9e8f740(0000) GS:ffff927775d00000(0000) knlGS:0000000000000000
[ 8.033739] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8.033740] CR2: 0000560b4b8e7b50 CR3: 000000016c5b4003 CR4: 00000000003606e0
[ 8.033740] Call Trace:
[ 8.033758] haswell_crtc_enable+0x2b4/0x820 [i915]
[ 8.033761] ? finish_wait+0x56/0x70
[ 8.033776] intel_update_crtc+0x5a/0xf0 [i915]
[ 8.033791] skl_update_crtcs+0x17d/0x200 [i915]
[ 8.033804] intel_atomic_commit_tail+0x333/0x10b0 [i915]
[ 8.033806] ? __schedule+0x3de/0x8b0
[ 8.033820] intel_atomic_commit+0x413/0x4b0 [i915]
[ 8.033829] ? drm_atomic_check_only+0x3d0/0x580 [drm]
[ 8.033835] ? handle_conflicting_encoders+0x28e/0x2a0 [drm_kms_helper]
[ 8.033841] drm_atomic_commit+0x51/0x60 [drm]
[ 8.033845] drm_atomic_helper_set_config+0x63/0xa0 [drm_kms_helper]
[ 8.033851] __drm_mode_set_config_internal+0x6b/0x120 [drm]
[ 8.033856] drm_mode_setcrtc+0x4f6/0x640 [drm]
[ 8.033858] ? ww_mutex_unlock+0x26/0x30
[ 8.033863] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.033868] drm_ioctl_kernel+0x6b/0xb0 [drm]
[ 8.033873] drm_ioctl+0x3e4/0x450 [drm]
[ 8.033877] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.033879] ? new_sync_read+0xe2/0x130
[ 8.033881] do_vfs_ioctl+0xa4/0x600
[ 8.033883] SyS_ioctl+0x79/0x90
[ 8.033884] entry_SYSCALL_64_fastpath+0x24/0xab
[ 8.033885] RIP: 0033:0x7f2ba95acf47
[ 8.033886] RSP: 002b:00007fffee1cd1c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 8.033887] RAX: ffffffffffffffda RBX: 00007f2ba9874b20 RCX: 00007f2ba95acf47
[ 8.033887] RDX: 00007fffee1cd200 RSI: 00000000c06864a2 RDI: 0000000000000009
[ 8.033888] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000001bbff20
[ 8.033889] R10: 0000000001bbf830 R11: 0000000000000246 R12: 0000000000000000
[ 8.033889] R13: 0000000001cd0a40 R14: 0000000001c45b80 R15: 0000000000000000
[ 8.033890] Code: 4c 89 e7 8b 92 20 03 00 00 e8 96 c1 95 fe 5b 41 5c 41 5d 41 5e 5d f3 c3 48 c7 c6 f0 67 58 c0 48 c7 c7 31 37 57 c0 e8 6a 0f e4 fd <0f> ff eb df 0f 1f 44 00 00 0f 1f 44 00 00 55 48 83 8f 30 37 00
[ 8.033908] ---[ end trace bb4cf30e0df32708 ]---
[ 8.060680] [drm:pipe_config_err [i915]] *ERROR* mismatch in output_types (expected 0x00000400, found 0x00000040)
[ 8.060698] [drm:pipe_config_err [i915]] *ERROR* mismatch in pch_pfit.enabled (expected 1, found 0)
[ 8.060713] [drm:pipe_config_err [i915]] *ERROR* mismatch in pch_pfit.size (expected 0x06400384, found 0x00000000)
[ 8.060714] pipe state doesn't match!
[ 8.060734] ------------[ cut here ]------------
[ 8.060751] WARNING: CPU: 2 PID: 340 at /build/linux-hwe-qx9Tq0/linux-hwe-4.13.0/drivers/gpu/drm/i915/intel_display.c:12277 intel_atomic_commit_tail+0xdc5/0x10b0 [i915]
[ 8.060751] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic arc4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm intel_rapl x86_pkg_temp_thermal intel_powerclamp iwlmvm coretemp snd_seq_midi snd_seq_midi_event mac80211 kvm_intel snd_rawmidi kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_seq snd_seq_device snd_timer iwlwifi aesni_intel aes_x86_64 crypto_simd glue_helper cryptd cfg80211 intel_cstate intel_rapl_perf snd soundcore mei_me shpchp mei intel_pch_thermal hci_uart btbcm serdev btqca btintel bluetooth ecdh_generic intel_lpss_acpi intel_lpss mac_hid acpi_pad acpi_als kfifo_buf industrialio parport_pc ppdev lp parport autofs4 i915 i2c_algo_bit drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ptp pps_core
[ 8.060773] drm ahci libahci video pinctrl_sunrisepoint pinctrl_intel i2c_hid hid
[ 8.060777] CPU: 2 PID: 340 Comm: plymouthd Tainted: G W 4.13.0-37-generic #42~16.04.1-Ubuntu
[ 8.060777] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./H110M-ITX/ac, BIOS P7.20 03/01/2018
[ 8.060778] task: ffff92776c82af80 task.stack: ffffa93540b14000
[ 8.060793] RIP: 0010:intel_atomic_commit_tail+0xdc5/0x10b0 [i915]
[ 8.060794] RSP: 0018:ffffa93540b17a88 EFLAGS: 00010282
[ 8.060795] RAX: 0000000000000019 RBX: ffff927765af8308 RCX: 0000000000000006
[ 8.060795] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff927775d16570
[ 8.060796] RBP: ffffa93540b17b40 R08: 0000000000000001 R09: 0000000000000325
[ 8.060796] R10: ffff927765af8000 R11: 0000000000000325 R12: ffff927765ccd000
[ 8.060797] R13: ffff927765d9c000 R14: ffff927765af8310 R15: ffff92776586f000
[ 8.060798] FS: 00007f2ba9e8f740(0000) GS:ffff927775d00000(0000) knlGS:0000000000000000
[ 8.060798] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8.060799] CR2: 00007f910e308000 CR3: 000000016c5b4003 CR4: 00000000003606e0
[ 8.060799] Call Trace:
[ 8.060803] ? wait_woken+0x80/0x80
[ 8.060818] intel_atomic_commit+0x413/0x4b0 [i915]
[ 8.060828] ? drm_atomic_check_only+0x3d0/0x580 [drm]
[ 8.060834] ? handle_conflicting_encoders+0x28e/0x2a0 [drm_kms_helper]
[ 8.060841] drm_atomic_commit+0x51/0x60 [drm]
[ 8.060844] drm_atomic_helper_set_config+0x63/0xa0 [drm_kms_helper]
[ 8.060850] __drm_mode_set_config_internal+0x6b/0x120 [drm]
[ 8.060855] drm_mode_setcrtc+0x4f6/0x640 [drm]
[ 8.060857] ? ww_mutex_unlock+0x26/0x30
[ 8.060862] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.060867] drm_ioctl_kernel+0x6b/0xb0 [drm]
[ 8.060872] drm_ioctl+0x3e4/0x450 [drm]
[ 8.060876] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 8.060878] ? new_sync_read+0xe2/0x130
[ 8.060880] do_vfs_ioctl+0xa4/0x600
[ 8.060882] SyS_ioctl+0x79/0x90
[ 8.060883] entry_SYSCALL_64_fastpath+0x24/0xab
[ 8.060884] RIP: 0033:0x7f2ba95acf47
[ 8.060884] RSP: 002b:00007fffee1cd1c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 8.060885] RAX: ffffffffffffffda RBX: 00007f2ba9874b20 RCX: 00007f2ba95acf47
[ 8.060886] RDX: 00007fffee1cd200 RSI: 00000000c06864a2 RDI: 0000000000000009
[ 8.060886] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000001bbff20
[ 8.060887] R10: 0000000001bbf830 R11: 0000000000000246 R12: 0000000000000000
[ 8.060888] R13: 0000000001cd0a40 R14: 0000000001c45b80 R15: 0000000000000000
[ 8.060888] Code: b6 d0 0f b6 f1 48 c7 c7 c0 87 58 c0 e8 56 08 e3 fd 0f ff 4c 8b 95 50 ff ff ff e9 47 f8 ff ff 48 c7 c7 54 3f 57 c0 e8 3c 08 e3 fd <0f> ff e9 dd f8 ff ff 80 3d 6f 8a 0f 00 00 0f 85 23 02 00 00 48
[ 8.060907] ---[ end trace bb4cf30e0df32709 ]---
[ 8.150869] audit: type=1400 audit(1522261398.990:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=777 comm="apparmor_parser"
[ 8.150872] audit: type=1400 audit(1522261398.990:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=777 comm="apparmor_parser"
[ 8.150874] audit: type=1400 audit(1522261398.990:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=777 comm="apparmor_parser"
[ 8.150875] audit: type=1400 audit(1522261398.990:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=777 comm="apparmor_parser"
[ 8.151010] audit: type=1400 audit(1522261398.990:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=776 comm="apparmor_parser"
[ 8.151012] audit: type=1400 audit(1522261398.990:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=776 comm="apparmor_parser"
[ 8.151921] audit: type=1400 audit(1522261398.991:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=782 comm="apparmor_parser"
[ 8.152802] audit: type=1400 audit(1522261398.992:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=781 comm="apparmor_parser"
[ 8.152804] audit: type=1400 audit(1522261398.992:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=781 comm="apparmor_parser"
[ 8.152806] audit: type=1400 audit(1522261398.992:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=781 comm="apparmor_parser"
[ 8.303390] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.456930] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.459673] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 8.644146] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 8.709743] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.179672] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.179675] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 10.179722] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 12.217033] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.217035] Bluetooth: BNEP filters: protocol multicast
[ 12.217038] Bluetooth: BNEP socket layer initialized
[ 22.100133] usb 1-3: device descriptor read/64, error -110
[ 22.328128] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ 27.476133] usb 1-3: device descriptor read/64, error -110
[ 43.115167] usb 1-3: device descriptor read/64, error -110
[ 43.344211] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 48.388711] usb 1-3: device descriptor read/8, error -110
[ 53.773642] usb 1-3: device descriptor read/8, error -110
[ 54.001725] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[ 59.153832] usb 1-3: device descriptor read/8, error -110
[ 64.531984] usb 1-3: device descriptor read/8, error -110
[ 64.639893] usb usb1-port3: unable to enumerate USB device
[ 64.759941] usb 1-7: new low-speed USB device number 7 using xhci_hcd
[ 64.905494] usb 1-7: New USB device found, idVendor=0461, idProduct=0010
[ 64.905495] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 64.905496] usb 1-7: Product: USB Keyboard
[ 64.905497] usb 1-7: Manufacturer: NOVATEK
[ 65.024013] usb 1-8: new low-speed USB device number 8 using xhci_hcd
[ 65.167169] usb 1-8: New USB device found, idVendor=0461, idProduct=4d20
[ 65.167170] usb 1-8: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 65.167171] usb 1-8: Product: USB Optical Mouse
[ 65.432108] usb 1-9: new full-speed USB device number 9 using xhci_hcd
[ 65.576023] usb 1-9: New USB device found, idVendor=046d, idProduct=c52b
[ 65.576024] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 65.576031] usb 1-9: Product: USB Receiver
[ 65.576032] usb 1-9: Manufacturer: Logitech
[ 65.590834] usbcore: registered new interface driver btusb
[ 65.607103] Bluetooth: hci0: read Intel version: 3707100100012d0d25
[ 65.607104] Bluetooth: hci0: Intel device is already patched. patch num: 25
[ 65.611588] usbcore: registered new interface driver usbhid
[ 65.611590] usbhid: USB HID core driver
[ 65.614475] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:0461:0010.0001/input/input14
[ 65.618379] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9/input2
[ 65.660797] Bluetooth: RFCOMM TTY layer initialized
[ 65.660800] Bluetooth: RFCOMM socket layer initialized
[ 65.660803] Bluetooth: RFCOMM ver 1.11
[ 65.672182] hid-generic 0003:0461:0010.0001: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-7/input0
[ 65.672284] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:0461:0010.0003/input/input15
[ 65.732289] hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-7/input1
[ 65.732355] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:0461:4D20.0004/input/input16
[ 65.792337] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:046D:C52B.0006/0003:046D:404D.0007/input/input17
[ 65.792387] hid-generic 0003:0461:4D20.0004: input,hidraw3: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-8/input0
[ 65.792531] logitech-hidpp-device 0003:046D:404D.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-9:1
ciol@ciol-desktop:~$ Je viens de rebooter avec uniquement mon clavier et souris branché en usb, même symptômes. Et refait les 2 commandes. (J'ai également débranché mon deuxième clavier sans fils pour le boot);
Hors ligne