Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 29/01/2018, à 13:57

Mhilay

[ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Bonjour!Encore moi...Après avoir tout correctement installé mon dual-boot Grub2 ubuntu/win10, j'ai du faire une mauvaise manip' en voulant installer un second disque disque lors de la création de son point de montage.
Du coup,arrivé au Grub ubuntu ne démarrait plus (aucun soucis pour win10).
Quand je dis ne démarrait plus, c’est pas tout à fait ça...il me proposait 4 choix de noyaux dont deux debug...
Toute façon je les ai tous essayé sans autre résultat que Alt/Ctrl/Sup pour rebooter...
Du coup je prend ma clé ubuntu et fait une réinstallation partielle histoire de garder mon bureau et récupérer ma sauvegarde.
Mais le problème n'est pas résolu vu la difficulté qu'il à a démarrer.
Une fois sur la session aucun soucis, tout est normal
Je n'y entant pas grand chose dans le boot-info que je joints

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v2.00) is installed in the boot sector of sda1 
                       and looks at sector 63247744 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       for (,msdos1)/boot/grub. It also embeds following 
                       components:
                       
                       modules
                       -------------------------------------------------------
                       fshelp ext2 part_msdos biosdisk
                       -------------------------------------------------------
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1               2,048   288,894,626   288,892,579  83 Linux
/dev/sda2    *    288,894,976   290,019,327     1,124,352   7 NTFS / exFAT / HPFS
/dev/sda3         290,019,328   484,206,591   194,187,264   7 NTFS / exFAT / HPFS
/dev/sda4         484,208,638   488,396,799     4,188,162   5 Extended
/dev/sda5         484,208,640   488,396,799     4,188,160  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/sda1        a98e2b41-d1e4-46ef-bae7-6b23a6f6f000   ext4       
/dev/sda2        FA3E28A13E285941                       ntfs       Réservé au système
/dev/sda3        0CDE2CD8DE2CBC38                       ntfs       
/dev/sda5        efea27bb-c046-4765-ab52-bce0d58a7fe5   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 29 12:55 ata-SONY_DVD_RW_DW-G120A -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan 29 13:10 ata-ST3250824AS_5ND3QRTK -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 29 13:10 ata-ST3250824AS_5ND3QRTK-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 29 13:11 ata-ST3250824AS_5ND3QRTK-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 29 13:11 ata-ST3250824AS_5ND3QRTK-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 29 13:10 ata-ST3250824AS_5ND3QRTK-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan 29 13:10 ata-ST3250824AS_5ND3QRTK-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Jan 29 12:55 usb-Generic_Flash_HS-CF_000022272228-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 Jan 29 12:55 usb-Generic_Flash_HS-MS_SD_000022272228-0:1 -> ../../sdc
lrwxrwxrwx 1 root root  9 Jan 29 12:55 usb-Generic_Flash_HS-SM_000022272228-0:2 -> ../../sdd

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
else
  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
	else
	  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
	fi
        linux	/boot/vmlinuz-4.13.0-32-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.13.0-32-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
	menuentry 'Ubuntu, avec Linux 4.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-32-generic-advanced-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.13.0-32-generic…'
	        linux	/boot/vmlinuz-4.13.0-32-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-32-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-32-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-32-generic-init-upstart-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.13.0-32-generic…'
	        linux	/boot/vmlinuz-4.13.0-32-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-32-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-32-generic-recovery-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.13.0-32-generic…'
	        linux	/boot/vmlinuz-4.13.0-32-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-32-generic
	}
	menuentry 'Ubuntu, avec Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-112-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-112-generic-advanced-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.4.0-112-generic…'
	        linux	/boot/vmlinuz-4.4.0-112-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-112-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-112-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-112-generic-init-upstart-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.4.0-112-generic…'
	        linux	/boot/vmlinuz-4.4.0-112-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-112-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-112-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-112-generic-recovery-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.4.0-112-generic…'
	        linux	/boot/vmlinuz-4.4.0-112-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-112-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-a98e2b41-d1e4-46ef-bae7-6b23a6f6f000' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		else
		  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
	else
	  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
	else
	  search --no-floppy --fs-uuid --set=root a98e2b41-d1e4-46ef-bae7-6b23a6f6f000
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-FA3E28A13E285941' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  FA3E28A13E285941
	else
	  search --no-floppy --fs-uuid --set=root FA3E28A13E285941
	fi
	parttool ${root} hidden-
	drivemap -s (hd0) ${root}
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=efea27bb-c046-4765-ab52-bce0d58a7fe5 none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  30.155147552 = 32.378843136   boot/grub/grub.cfg                             1
  30.161483765 = 32.385646592   boot/grub/i386-pc/core.img                     1
  30.257545471 = 32.488792064   boot/vmlinuz-4.10.0-28-generic                 1
  14.445251465 = 15.510470656   boot/vmlinuz-4.13.0-32-generic                 1
   8.569854736 = 9.201811456    boot/vmlinuz-4.4.0-112-generic                 1
  30.139232635 = 32.361754624   boot/vmlinuz-4.4.0-21-generic                  1
  14.445251465 = 15.510470656   vmlinuz                                        1
  30.257545471 = 32.488792064   vmlinuz.old                                    1
  14.686893463 = 15.769931776   boot/initrd.img-4.10.0-28-generic              1
  14.881237030 = 15.978606592   boot/initrd.img-4.13.0-32-generic              3
  30.159046173 = 32.383029248   boot/initrd.img-4.4.0-112-generic              5
   7.451839447 = 8.001351680    boot/initrd.img-4.4.0-21-generic               2
  14.881237030 = 15.978606592   initrd.img                                     3
  14.686893463 = 15.769931776   initrd.img.old                                 1

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda4

00000000  65 61 73 65 20 65 6e 74  65 72 20 61 6e 20 48 54  |ease enter an HT|
00000010  54 50 20 73 65 72 76 65  72 20 64 69 72 65 63 74  |TP server direct|
00000020  6f 72 79 2e 00 50 6c 65  61 73 65 20 65 6e 74 65  |ory..Please ente|
00000030  72 20 61 6e 20 48 54 54  50 20 73 65 72 76 65 72  |r an HTTP server|
00000040  2e 00 50 6c 65 61 73 65  20 65 6e 74 65 72 20 61  |..Please enter a|
00000050  6e 20 4e 46 53 20 64 69  72 65 63 74 6f 72 79 2e  |n NFS directory.|
00000060  00 50 6c 65 61 73 65 20  65 6e 74 65 72 20 61 6e  |.Please enter an|
00000070  20 4e 46 53 20 73 65 72  76 65 72 2e 00 50 6c 65  | NFS server..Ple|
00000080  61 73 65 20 66 69 6c 6c  20 69 6e 20 74 68 65 20  |ase fill in the |
00000090  6e 65 74 77 6f 72 6b 20  69 6e 66 6f 72 6d 61 74  |network informat|
000000a0  69 6f 6e 00 50 6c 65 61  73 65 20 6d 61 6b 65 20  |ion.Please make |
000000b0  73 75 72 65 20 74 68 65  20 63 6f 6d 70 73 20 70  |sure the comps p|
000000c0  61 63 6b 61 67 65 20 69  73 20 69 6e 73 74 61 6c  |ackage is instal|
000000d0  6c 65 64 2e 00 50 6c 65  61 73 65 20 73 65 6c 65  |led..Please sele|
000000e0  63 74 20 61 20 70 61 72  74 69 74 69 6f 6e 20 66  |ct a partition f|
000000f0  72 6f 6d 20 74 68 65 20  6c 69 73 74 2e 00 50 6c  |rom the list..Pl|
00000100  65 61 73 65 20 73 65 6c  65 63 74 20 61 20 72 6f  |ease select a ro|
00000110  6f 74 20 70 61 73 73 77  6f 72 64 2e 00 50 6f 73  |ot password..Pos|
00000120  74 2d 49 6e 73 74 61 6c  6c 61 74 69 6f 6e 20 53  |t-Installation S|
00000130  63 72 69 70 74 00 50 72  65 2d 49 6e 73 74 61 6c  |cript.Pre-Instal|
00000140  6c 61 74 69 6f 6e 20 53  63 72 69 70 74 00 50 72  |lation Script.Pr|
00000150  65 73 65 72 76 65 20 65  78 69 73 74 69 6e 67 20  |eserve existing |
00000160  70 61 72 74 69 74 69 6f  6e 73 00 50 72 65 76 69  |partitions.Previ|
00000170  65 77 20 4f 70 74 69 6f  6e 73 00 50 72 69 6e 74  |ew Options.Print|
00000180  69 6e 67 20 53 75 70 70  6f 72 74 00 50 72 6f 62  |ing Support.Prob|
00000190  65 20 66 6f 72 20 6d 6f  6e 69 74 6f 72 00 50 72  |e for monitor.Pr|
000001a0  6f 62 65 20 66 6f 72 20  76 69 64 65 6f 20 63 61  |obe for video ca|
000001b0  72 64 00 52 41 49 44 00  52 41 49 44 20 44 00 fe  |rd.RAID.RAID D..|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 e8 3f 00 00 00  |............?...|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


========= Devices which don't seem to have a corresponding hard drive: =========

sdb sdc sdd 


ADDITIONAL INFORMATION :
=================== log of boot-repair 20180129_1309 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-repair is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux
/dev/sda2:Windows 10 (loader):Windows:chain

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/sda1: UUID="a98e2b41-d1e4-46ef-bae7-6b23a6f6f000" TYPE="ext4" PTTYPE="dos" PARTUUID="0008f87f-01"
/dev/sda2: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="FA3E28A13E285941" TYPE="ntfs" PARTUUID="0008f87f-02"
/dev/sda3: UUID="0CDE2CD8DE2CBC38" TYPE="ntfs" PARTUUID="0008f87f-03"
/dev/sda5: UUID="efea27bb-c046-4765-ab52-bce0d58a7fe5" TYPE="swap" PARTUUID="0008f87f-05"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda3.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 janv. 28 18:47 grub.d
total 80
-rwxr-xr-x 1 root root  9791 juin  21  2017 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 juin  21  2017 10_linux
-rwxr-xr-x 1 root root 11082 juin  21  2017 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  21  2017 30_os-prober
-rwxr-xr-x 1 root root  1418 juin  21  2017 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  21  2017 40_custom
-rwxr-xr-x 1 root root   216 juin  21  2017 41_custom
-rw-r--r-- 1 root root   483 juin  21  2017 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda2.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda3.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA ST3250824AS:;
1:1049kB:148GB:148GB:ext4::;
2:148GB:148GB:576MB:ntfs::boot;
3:148GB:248GB:99.4GB:ntfs::;
4:248GB:250GB:2144MB:::;
5:248GB:250GB:2144MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop1 loop squashfs 133,5M
sr0   rom            1024M
loop2 loop squashfs     4M
fd0   disk              4K
loop0 loop squashfs  77,1M
sda   disk          232,9G
sda4  part              1K
sda2  part ntfs       549M Réservé au système
sda5  part swap         2G
sda3  part ntfs      92,6G
sda1  part ext4     137,8G

KNAME ROTA RO RM STATE   MOUNTPOINT
loop1    1  1  0         /snap/gnome-3-26-1604/28
sr0      1  0  1 running
loop2    1  1  0         /snap/gedit/33
fd0      1  0  1
loop0    1  1  0         /snap/core/3886
sda      1  0  0 running
sda4     1  0  0
sda2     1  0  0         /mnt/boot-sav/sda2
sda5     1  0  0         [SWAP]
sda3     1  0  0         /mnt/boot-sav/sda3
sda1     1  0  0         /


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1005960k,nr_inodes=206819,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=205952k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=27,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12281)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/var/lib/snapd/snaps/gnome-3-26-1604_28.snap on /snap/gnome-3-26-1604/28 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/gedit_33.snap on /snap/gedit/33 type squashfs (ro,nodev,relatime)
/var/lib/snapd/snaps/core_3886.snap on /snap/core/3886 type squashfs (ro,nodev,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=205952k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
tmpfs on /run/snapd/ns type tmpfs (rw,nosuid,noexec,relatime,size=205952k,mode=755)
nsfs on /run/snapd/ns/gedit.mnt type nsfs (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)


=================== ls:
/sys/block/fd0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvb dvd dvdrw ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log lp0 mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null parport0 port ppp psaux ptmx pts radio0 random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sdb sdc sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vbi0 vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 30 38 11  |........?....08.|
00000020  00 00 00 00 80 00 80 00  ff 27 11 00 00 00 00 00  |.........'......|
00000030  00 b7 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  41 59 28 3e a1 28 3e fa  |........AY(>.(>.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 58 49 11  |........?....XI.|
00000020  00 00 00 00 80 00 80 00  ff 0f 93 0b 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  38 bc 2c de d8 2c de 0c  |........8.,..,..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  983M     0  983M   0% /dev
tmpfs          tmpfs     202M  6.4M  195M   4% /run
/dev/sda1      ext4      136G   15G  115G  11% /
tmpfs          tmpfs    1006M  324K 1006M   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs    1006M     0 1006M   0% /sys/fs/cgroup
/dev/loop1     squashfs  134M  134M     0 100% /snap/gnome-3-26-1604/28
/dev/loop2     squashfs  4.0M  4.0M     0 100% /snap/gedit/33
/dev/loop0     squashfs   78M   78M     0 100% /snap/core/3886
tmpfs          tmpfs     202M   80K  202M   1% /run/user/1000
/dev/sda2      fuseblk   549M  322M  228M  59% /mnt/boot-sav/sda2
/dev/sda3      fuseblk    93G   23G   71G  25% /mnt/boot-sav/sda3

=================== fdisk -l:
Disk /dev/loop0: 77.1 MiB, 80797696 bytes, 157808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 133.5 MiB, 139976704 bytes, 273392 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 4 MiB, 4145152 bytes, 8096 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes






Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0008f87f

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1            2048 288894626 288892579 137.8G 83 Linux
/dev/sda2  *    288894976 290019327   1124352   549M  7 HPFS/NTFS/exFAT
/dev/sda3       290019328 484206591 194187264  92.6G  7 HPFS/NTFS/exFAT
/dev/sda4       484208638 488396799   4188162     2G  5 Extended
/dev/sda5       484208640 488396799   4188160     2G 82 Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Mais il apparaît clairement que quelque chose le chagrine!
Un conseil s'il vous plais car je suis perdue pour monter [partition /boot séparée :]

Dernière modification par Mhilay (Le 31/01/2018, à 21:46)


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#2 Le 29/01/2018, à 14:25

LukePerp

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Bonjour,
Il faut d'abord connaitre les détails du démarrage.
Redémarre ubuntu, et tout de suite au début, ouvres le terminal et donne nous le retour de :

dmesg

Puis après :

sudo systemd-analyze
sudo systemd-analyze blame
sudo systemd-analyze critical-chain

Ensuite, il y a une anomalie dans ton fstab.
Supprime la ligne suivante :

/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

En faisant :

sudo nano /etc/fstab

Supprime la ligne en question, fais ensuite Ctrl+O pour enregistrer et Ctrl+X pour quitter.

Dernière modification par LukePerp (Le 29/01/2018, à 14:29)


Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline

Hors ligne

#3 Le 29/01/2018, à 14:29

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Merci.
Je redémarre pour chaque ligne de commandes?


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#4 Le 29/01/2018, à 14:32

LukePerp

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Mhilay a écrit :

Merci.
Je redémarre pour chaque ligne de commandes?

non, que pour dmesg


Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline

Hors ligne

#5 Le 29/01/2018, à 14:34

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

dmesg...
ben là je vois qu'il n'est pas du tout content!

morteus@morteus-MS-7187:~$ dmesg
[    0.000000] random: get_random_bytes called from start_kernel+0x35/0x41c with crng_init=0
[    0.000000] Linux version 4.13.0-32-generic (buildd@lgw01-amd64-019) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:25 UTC 2018 (Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: MEDIONPC MS-7187/MS-7187, BIOS 6.00 PG 04/19/2006
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fee0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 write-through
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f4f10-0x000f4f1f] mapped at [c00f4f10]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x153fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x14f16000, 0x14f16fff] PGTABLE
[    0.000000] BRK [0x14f17000, 0x14f17fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32528000-0x3528bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8DC0 000014 (v00 IntelR)
[    0.000000] ACPI: RSDT 0x000000007FEE3040 000030 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x000000007FEE30C0 000074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 0x000000007FEE3180 0049D7 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000007FEE0000 000040
[    0.000000] ACPI: MCFG 0x000000007FEE7CC0 00003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 0x000000007FEE7BC0 000084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1156MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000007fedffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007fedffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fedffff]
[    0.000000] On node 0 totalpages: 523902
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2185 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 296162 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x7ff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 30 pages/cpu @f6583000 s93324 r0 d29556 u122880
[    0.000000] pcpu-alloc: s93324 r0 d29556 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 521677
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=a98e2b41-d1e4-46ef-bae7-6b23a6f6f000 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007fee0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2011828K/2095608K available (8500K kernel code, 877K rwdata, 3332K rodata, 1088K init, 852K bss, 83780K reserved, 0K cma-reserved, 1184648K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
                 cpu_entry : 0xffc00000 - 0xffd39000   (1252 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xd4c7e000 - 0xd4d8e000   (1088 kB)
                     .data : 0xd484d3c6 - 0xd4c6b400   (4216 kB)
                     .text : 0xd4000000 - 0xd484d3c6   (8500 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 36802 entries in 72 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=f60c8000 soft=f60ca000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 2097152 bytes of page_ext
[    0.004000] tsc: Fast TSC calibration using PIT
[    0.008000] tsc: Detected 2999.611 MHz processor
[    0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.22 BogoMIPS (lpj=11998444)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] ACPI: Core revision 20170531
[    0.014680] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.014734] Security Framework initialized
[    0.014738] Yama: becoming mindful.
[    0.014778] AppArmor: AppArmor initialized
[    0.014850] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014857] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015218] CPU: Physical Processor ID: 0
[    0.015220] CPU: Processor Core ID: 0
[    0.015232] FEATURE SPEC_CTRL Not Present
[    0.015235] mce: CPU supports 4 MCE banks
[    0.015245] CPU0: Thermal monitoring enabled (TM1)
[    0.015253] process: using mwait in idle threads
[    0.015264] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.015266] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.015618] Freeing SMP alternatives memory: 32K
[    0.020136] smpboot: Max logical packages: 2
[    0.020143] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020545] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064000] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz (family: 0xf, model: 0x6, stepping: 0x2)
[    0.064000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.064000] ... version:                0
[    0.064000] ... bit width:              40
[    0.064000] ... generic registers:      18
[    0.064000] ... value mask:             000000ffffffffff
[    0.064000] ... max period:             0000007fffffffff
[    0.064000] ... fixed-purpose events:   0
[    0.064000] ... event mask:             000000000003ffff
[    0.064000] Hierarchical SRCU implementation.
[    0.064000] smp: Bringing up secondary CPUs ...
[    0.064000] CPU 1 irqstacks, hard=f6372000 soft=f6374000
[    0.064000] x86: Booting SMP configuration:
[    0.064000] .... node  #0, CPUs:      #1
[    0.004000] Initializing CPU#1
[    0.072594] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.074665] smp: Brought up 1 node, 2 CPUs
[    0.074665] smpboot: Total of 2 processors activated (11998.44 BogoMIPS)
[    0.076353] devtmpfs: initialized
[    0.076458] evm: security.selinux
[    0.076459] evm: security.SMACK64
[    0.076460] evm: security.SMACK64EXEC
[    0.076461] evm: security.SMACK64TRANSMUTE
[    0.076462] evm: security.SMACK64MMAP
[    0.076463] evm: security.ima
[    0.076465] evm: security.capability
[    0.076510] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[    0.076510] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.076510] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.076510] pinctrl core: initialized pinctrl subsystem
[    0.076510] RTC time: 13:30:38, date: 01/29/18
[    0.076613] NET: Registered protocol family 16
[    0.077009] EISA bus registered
[    0.077047] cpuidle: using governor ladder
[    0.077047] cpuidle: using governor menu
[    0.077047] PCCT header not found.
[    0.077047] ACPI: bus type PCI registered
[    0.077047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.077047] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.077047] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[    0.077047] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.077047] PCI: Using MMCONFIG for extended config space
[    0.077047] PCI: Using configuration type 1 for base access
[    0.077047] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.077047] mtrr: probably your BIOS does not setup all CPUs.
[    0.077047] mtrr: corrected configuration.
[    0.081655] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.081655] ACPI: Added _OSI(Module Device)
[    0.081655] ACPI: Added _OSI(Processor Device)
[    0.081655] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.081655] ACPI: Added _OSI(Processor Aggregator Device)
[    0.087253] ACPI: Interpreter enabled
[    0.087295] ACPI: (supports S0 S3 S4 S5)
[    0.087297] ACPI: Using IOAPIC for interrupt routing
[    0.087345] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.087672] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.098067] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.098075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.098083] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.098506] PCI host bridge to bus 0000:00
[    0.098510] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.098513] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.098516] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.098518] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.098521] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff window]
[    0.098524] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.098538] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.098723] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[    0.098788] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.098965] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.098993] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[    0.099080] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.099238] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.099289] pci 0000:00:1d.0: reg 0x20: [io  0xff00-0xff1f]
[    0.099464] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.099514] pci 0000:00:1d.1: reg 0x20: [io  0xfe00-0xfe1f]
[    0.099687] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.099738] pci 0000:00:1d.2: reg 0x20: [io  0xfd00-0xfd1f]
[    0.099909] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.099959] pci 0000:00:1d.3: reg 0x20: [io  0xfc00-0xfc1f]
[    0.100145] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.100168] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[    0.100253] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.100400] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.100610] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
[    0.100857] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.100877] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.100887] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.100898] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.100908] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.100918] pci 0000:00:1f.1: reg 0x20: [io  0xfb00-0xfb0f]
[    0.100940] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.100942] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.100945] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.100947] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.101102] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.101123] pci 0000:00:1f.2: reg 0x10: [io  0xfa00-0xfa07]
[    0.101133] pci 0000:00:1f.2: reg 0x14: [io  0xf900-0xf903]
[    0.101142] pci 0000:00:1f.2: reg 0x18: [io  0xf800-0xf807]
[    0.101151] pci 0000:00:1f.2: reg 0x1c: [io  0xf700-0xf703]
[    0.101160] pci 0000:00:1f.2: reg 0x20: [io  0xf600-0xf61f]
[    0.101170] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffe000-0xfdffe3ff]
[    0.101218] pci 0000:00:1f.2: PME# supported from D3hot
[    0.101365] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.101427] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.101651] pci 0000:01:00.0: [1002:7146] type 00 class 0x030000
[    0.101675] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.101687] pci 0000:01:00.0: reg 0x18: [mem 0xfdcf0000-0xfdcfffff 64bit]
[    0.101696] pci 0000:01:00.0: reg 0x20: [io  0xde00-0xdeff]
[    0.101712] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.101758] pci 0000:01:00.0: supports D1 D2
[    0.101830] pci 0000:01:00.1: [1002:7166] type 00 class 0x038000
[    0.101851] pci 0000:01:00.1: reg 0x10: [mem 0xfdce0000-0xfdceffff 64bit]
[    0.101912] pci 0000:01:00.1: supports D1 D2
[    0.101979] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.101990] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.101994] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.101998] pci 0000:00:01.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.102003] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.102067] pci 0000:02:00.0: [1131:7134] type 00 class 0x048000
[    0.102091] pci 0000:02:00.0: reg 0x10: [mem 0xfdeff000-0xfdeff3ff]
[    0.102181] pci 0000:02:00.0: supports D1 D2
[    0.102250] pci 0000:02:03.0: [1106:3044] type 00 class 0x0c0010
[    0.102275] pci 0000:02:03.0: reg 0x10: [mem 0xfdefe000-0xfdefe7ff]
[    0.102287] pci 0000:02:03.0: reg 0x14: [io  0xef00-0xef7f]
[    0.102370] pci 0000:02:03.0: supports D2
[    0.102372] pci 0000:02:03.0: PME# supported from D2 D3hot D3cold
[    0.102454] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
[    0.102478] pci 0000:02:08.0: reg 0x10: [mem 0xfdefd000-0xfdefdfff]
[    0.102489] pci 0000:02:08.0: reg 0x14: [io  0xee00-0xee3f]
[    0.102567] pci 0000:02:08.0: supports D1 D2
[    0.102570] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102664] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.102669] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.102673] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.102680] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.102683] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.102686] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.102688] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.102691] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.102693] pci 0000:00:1e.0:   bridge window [mem 0x7ff00000-0xfebfffff window] (subtractive decode)
[    0.102706] pci_bus 0000:00: on NUMA node 0
[    0.103842] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 10 *11 14 15)
[    0.103967] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 10 *11 14 15)
[    0.104100] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 7 10 11 14 15)
[    0.104223] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 *10 11 14 15)
[    0.104345] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 7 10 11 14 15)
[    0.104465] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 10 11 14 15) *0, disabled.
[    0.104588] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 7 10 11 14 15) *0, disabled.
[    0.104713] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 7 *10 11 14 15)
[    0.105356] SCSI subsystem initialized
[    0.105404] libata version 3.00 loaded.
[    0.105404] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.105404] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.105404] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.105404] vgaarb: loaded
[    0.105404] ACPI: bus type USB registered
[    0.105404] usbcore: registered new interface driver usbfs
[    0.105404] usbcore: registered new interface driver hub
[    0.105404] usbcore: registered new device driver usb
[    0.105404] EDAC MC: Ver: 3.0.0
[    0.105404] PCI: Using ACPI for IRQ routing
[    0.113493] PCI: pci_cache_line_size set to 64 bytes
[    0.113554] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.113557] e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
[    0.113738] NetLabel: Initializing
[    0.113740] NetLabel:  domain hash size = 128
[    0.113741] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.113765] NetLabel:  unlabeled traffic allowed by default
[    0.113797] clocksource: Switched to clocksource refined-jiffies
[    0.137029] VFS: Disk quotas dquot_6.6.0
[    0.137062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.137257] AppArmor: AppArmor Filesystem Enabled
[    0.137349] pnp: PnP ACPI init
[    0.137718] system 00:00: [io  0x0b78-0x0b7b] has been reserved
[    0.137722] system 00:00: [io  0x0f78-0x0f7b] has been reserved
[    0.137725] system 00:00: [io  0x0a78-0x0a7b] has been reserved
[    0.137728] system 00:00: [io  0x0e78-0x0e7b] has been reserved
[    0.137731] system 00:00: [io  0x0bbc-0x0bbf] has been reserved
[    0.137734] system 00:00: [io  0x0fbc-0x0fbf] has been reserved
[    0.137737] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.137740] system 00:00: [io  0x0294-0x0297] has been reserved
[    0.137743] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.137746] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.137754] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.137818] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.138038] pnp 00:02: [dma 2]
[    0.138099] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.138431] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.139083] pnp 00:04: [dma 3]
[    0.139161] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.139341] system 00:05: [io  0x0400-0x04bf] has been reserved
[    0.139347] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.139747] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.139753] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.140032] system 00:07: [mem 0x000cf400-0x000cffff] has been reserved
[    0.140036] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.140039] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.140042] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.140045] system 00:07: [mem 0x7fee0000-0x7fefffff] could not be reserved
[    0.140049] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.140052] system 00:07: [mem 0x00100000-0x7fedffff] could not be reserved
[    0.140055] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.140059] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.140062] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.140065] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.140068] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.140072] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.140075] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[    0.140080] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.140092] pnp: PnP ACPI: found 8 devices
[    0.140098] PnPBIOS: Disabled
[    0.178047] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.178071] clocksource: Switched to clocksource acpi_pm
[    0.178105] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[    0.178109] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.178113] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.178118] pci 0000:00:01.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.178122] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.178129] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.178132] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.178138] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.178142] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.178150] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.178153] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.178156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.178158] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.178161] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff window]
[    0.178164] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.178166] pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.178169] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.178171] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.178174] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.178176] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.178179] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.178181] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.178184] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.178186] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.178189] pci_bus 0000:02: resource 8 [mem 0x7ff00000-0xfebfffff window]
[    0.178298] NET: Registered protocol family 2
[    0.178604] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.178628] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.178666] TCP: Hash tables configured (established 8192 bind 8192)
[    0.178725] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.178736] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.178798] NET: Registered protocol family 1
[    0.179894] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.179915] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.179922] PCI: CLS 32 bytes, default 64
[    0.179922] Unpacking initramfs...
[    0.189341] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[    0.190329] CPU0: Core temperature/speed normal
[    1.751248] Freeing initrd memory: 46480K
[    1.751538] Scanning for low memory corruption every 60 seconds
[    1.752075] audit: initializing netlink subsys (disabled)
[    1.752159] audit: type=2000 audit(1517232639.752:1): state=initialized audit_enabled=0 res=1
[    1.752540] Initialise system trusted keyrings
[    1.752554] Key type blacklist registered
[    1.752610] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.755404] zbud: loaded
[    1.755996] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.756348] fuse init (API version 7.26)
[    1.759192] Key type asymmetric registered
[    1.759194] Asymmetric key parser 'x509' registered
[    1.759212] bounce: pool size: 64 pages
[    1.759232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.759287] io scheduler noop registered
[    1.759289] io scheduler deadline registered
[    1.759395] io scheduler cfq registered (default)
[    1.760033] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    1.760034] vesafb: scrolling: redraw
[    1.760037] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.760061] vesafb: framebuffer at 0xd0000000, mapped to 0xf8400000, using 5824k, total 5824k
[    1.760224] Console: switching to colour frame buffer device 175x65
[    1.760262] fb0: VESA VGA frame buffer device
[    1.760419] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.760439] ACPI: Power Button [PWRB]
[    1.760511] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.760528] ACPI: Sleep Button [SLPB]
[    1.760612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.760644] ACPI: Power Button [PWRF]
[    1.761470] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.761653] thermal LNXTHERM:00: registered as thermal_zone0
[    1.761656] ACPI: Thermal Zone [THRM] (33 C)
[    1.761722] GHES: HEST is not enabled!
[    1.761842] isapnp: Scanning for PnP cards...
[    1.761953] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.782453] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.783581] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[    1.784566] CPU1: Core temperature/speed normal
[    1.785550] Linux agpgart interface v0.103
[    1.813203] loop: module loaded
[    1.813441] ata_piix 0000:00:1f.1: version 2.13
[    1.814837] scsi host0: ata_piix
[    1.814978] scsi host1: ata_piix
[    1.815051] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[    1.815053] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[    1.815203] libphy: Fixed MDIO Bus: probed
[    1.815204] tun: Universal TUN/TAP device driver, 1.6
[    1.815312] PPP generic driver version 2.4.2
[    1.815390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.815396] ehci-pci: EHCI PCI platform driver
[    1.815564] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.815575] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.819504] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.819521] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[    1.819734] ata2: port disabled--ignoring
[    1.832026] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.832125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.832128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.832130] usb usb1: Product: EHCI Host Controller
[    1.832132] usb usb1: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[    1.832135] usb usb1: SerialNumber: 0000:00:1d.7
[    1.832327] hub 1-0:1.0: USB hub found
[    1.832341] hub 1-0:1.0: 8 ports detected
[    1.832675] ehci-platform: EHCI generic platform driver
[    1.832698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.832702] ohci-pci: OHCI PCI platform driver
[    1.832721] ohci-platform: OHCI generic platform driver
[    1.832733] uhci_hcd: USB Universal Host Controller Interface driver
[    1.832859] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.832871] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.832878] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.832901] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[    1.832996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.832999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.833001] usb usb2: Product: UHCI Host Controller
[    1.833003] usb usb2: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
[    1.833005] usb usb2: SerialNumber: 0000:00:1d.0
[    1.833170] hub 2-0:1.0: USB hub found
[    1.833183] hub 2-0:1.0: 2 ports detected
[    1.833462] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.833470] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.833478] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.833511] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[    1.833607] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.833610] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.833612] usb usb3: Product: UHCI Host Controller
[    1.833615] usb usb3: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
[    1.833617] usb usb3: SerialNumber: 0000:00:1d.1
[    1.833791] hub 3-0:1.0: USB hub found
[    1.833803] hub 3-0:1.0: 2 ports detected
[    1.834062] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.834070] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.834077] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.834107] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[    1.834199] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.834201] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.834204] usb usb4: Product: UHCI Host Controller
[    1.834206] usb usb4: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
[    1.834208] usb usb4: SerialNumber: 0000:00:1d.2
[    1.834377] hub 4-0:1.0: USB hub found
[    1.834389] hub 4-0:1.0: 2 ports detected
[    1.834655] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.834663] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.834670] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.834699] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[    1.834781] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.834783] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.834786] usb usb5: Product: UHCI Host Controller
[    1.834788] usb usb5: Manufacturer: Linux 4.13.0-32-generic uhci_hcd
[    1.834790] usb usb5: SerialNumber: 0000:00:1d.3
[    1.834959] hub 5-0:1.0: USB hub found
[    1.834970] hub 5-0:1.0: 2 ports detected
[    1.835209] i8042: PNP: No PS/2 controller found.
[    1.835210] i8042: Probing ports directly.
[    1.837620] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.837627] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.837841] mousedev: PS/2 mouse device common for all mice
[    1.838100] rtc_cmos 00:01: RTC can wake from S4
[    1.838241] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.838267] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[    1.838282] i2c /dev entries driver
[    1.838378] device-mapper: uevent: version 1.0.3
[    1.838487] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.838525] platform eisa.0: Probing EISA bus 0
[    1.838528] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.838531] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.838534] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.838536] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.838539] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.838541] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.838544] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.838546] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.838548] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.838551] platform eisa.0: EISA: Detected 0 cards
[    1.838557] cpufreq_nforce2: No nForce2 chipset
[    1.898065] ledtrig-cpu: registered to indicate activity on CPUs
[    1.898467] NET: Registered protocol family 10
[    1.909049] Segment Routing with IPv6
[    1.909083] NET: Registered protocol family 17
[    1.909099] Key type dns_resolver registered
[    1.985715] microcode: sig=0xf62, pf=0x4, revision=0xd
[    1.985784] microcode: Microcode Update Driver: v2.2.
[    1.985792] Using IPI No-Shortcut mode
[    1.985804] sched_clock: Marking stable (1984007530, 0)->(2084100051, -100092521)
[    1.986083] registered taskstats version 1
[    1.986100] Loading compiled-in X.509 certificates
[    2.000467] Loaded X.509 cert 'Build time autogenerated kernel key: 40145617f435ba8146bf5a0a42f03b55233a4673'
[    2.000536] zswap: loaded using pool lzo/zbud
[    2.004335] ata1.00: ATAPI: SONY    DVD RW DW-G120A, MYS2, max UDMA/66
[    2.011598] Key type big_key registered
[    2.011618] Key type trusted registered
[    2.016130] Key type encrypted registered
[    2.016135] AppArmor: AppArmor sha1 policy hashing enabled
[    2.016141] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.016178] evm: HMAC attrs: 0x1
[    2.016680]   Magic number: 2:6:535
[    2.016757] tty ttyS15: hash matches
[    2.017000] rtc_cmos 00:01: setting system clock to 2018-01-29 13:30:40 UTC (1517232640)
[    2.017388] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.017389] EDD information not available.
[    2.017440] PM: Hibernation image not present or could not be loaded.
[    2.028209] ata1.00: configured for UDMA/66
[    2.072311] isapnp: No Plug & Play device found
[    2.073306] scsi 0:0:0:0: CD-ROM            SONY     DVD RW DW-G120A  MYS2 PQ: 0 ANSI: 5
[    2.097805] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.097808] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.098031] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.098142] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.101376] Freeing unused kernel memory: 1088K
[    2.101443] Write protecting the kernel text: 8504k
[    2.101597] Write protecting the kernel read-only data: 3336k
[    2.101598] NX-protecting the kernel data: 5832k
[    2.101888] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.160046] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.364523] usb 1-1: New USB device found, idVendor=06f8, idProduct=e033
[    2.364533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.364539] usb 1-1: Product: 802.11n WLAN Adapter
[    2.364544] usb 1-1: Manufacturer: Realtek
[    2.364550] usb 1-1: SerialNumber: 00e04c000001
[    2.367925] Floppy drive(s): fd0 is 1.44M
[    2.403452] FDC 0 is a post-1991 82077
[    2.503792] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.503795] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.518453] ahci 0000:00:1f.2: version 3.0
[    2.519213] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.519224] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
[    2.562440] scsi host2: ahci
[    2.568212] firewire_ohci 0000:02:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    2.568403] scsi host3: ahci
[    2.601159] scsi host4: ahci
[    2.602691] e100 0000:02:08.0 eth0: addr 0xfdefd000, irq 20, MAC addr 00:16:17:59:85:1e
[    2.606122] e100 0000:02:08.0 enp2s8: renamed from eth0
[    2.606451] scsi host5: ahci
[    2.606560] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 24
[    2.606564] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 24
[    2.606567] ata5: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 24
[    2.606570] ata6: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 24
[    2.723751] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    2.735108] [drm] radeon kernel modesetting enabled.
[    2.735193] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[    2.735195] fb: switching to radeondrmfb from VESA VGA
[    2.735243] Console: switching to colour dummy device 80x25
[    2.736639] [drm] initializing kernel modesetting (RV515 0x1002:0x7146 0x174B:0x0920 0x00).
[    2.740415] ATOM BIOS: RV515LE
[    2.740464] [drm] Generation 2 PCI interface, using max accessible memory
[    2.740484] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (64M used)
[    2.740494] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    2.740540] [drm] Detected VRAM RAM=256M, BAR=256M
[    2.740545] [drm] RAM width 64bits DDR
[    2.740791] [TTM] Zone  kernel: Available graphics memory: 437390 kiB
[    2.740793] [TTM] Zone highmem: Available graphics memory: 1029714 kiB
[    2.740794] [TTM] Initializing pool allocator
[    2.740802] [TTM] Initializing DMA pool allocator
[    2.740835] [drm] radeon: 64M of VRAM memory ready
[    2.740837] [drm] radeon: 512M of GTT memory ready.
[    2.740852] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.754824] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    2.756868] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    2.756932] radeon 0000:01:00.0: WB enabled
[    2.756947] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffa18000
[    2.756956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.756957] [drm] Driver supports precise vblank timestamp query.
[    2.756963] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    2.756999] [drm] radeon: irq initialized.
[    2.757025] [drm] Loading R500 Microcode
[    2.757364] [drm] radeon: ring at 0x0000000010001000
[    2.757399] [drm] ring test succeeded in 9 usecs
[    2.757616] [drm] ib test succeeded in 0 usecs
[    2.762025] [drm] Radeon Display Connectors
[    2.762030] [drm] Connector 0:
[    2.762035] [drm]   DVI-I-1
[    2.762039] [drm]   HPD2
[    2.762045] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    2.762049] [drm]   Encoders:
[    2.762050] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.762055] [drm]     DFP3: INTERNAL_LVTM1
[    2.762060] [drm] Connector 1:
[    2.762061] [drm]   SVIDEO-1
[    2.762065] [drm]   Encoders:
[    2.762066] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.796826] tsc: Refined TSC clocksource calibration: 2999.659 MHz
[    2.796835] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3d0354882, max_idle_ns: 440795283498 ns
[    2.851107] [drm] fb mappable at 0xD00C0000
[    2.851109] [drm] vram apper at 0xD0000000
[    2.851110] [drm] size 7258112
[    2.851111] [drm] fb depth is 24
[    2.851112] [drm]    pitch is 6912
[    2.851234] fbcon: radeondrmfb (fb0) is primary device
[    2.851352] Console: switching to colour frame buffer device 210x65
[    2.851397] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.864051] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.913976] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c
[    2.913979] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.913982] usb 4-1: Product: USB Keyboard
[    2.913984] usb 4-1: Manufacturer: Logitech
[    2.918370] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.922419] ata5: SATA link down (SStatus 0 SControl 300)
[    2.922450] ata6: SATA link down (SStatus 0 SControl 300)
[    2.922475] ata4: SATA link down (SStatus 0 SControl 300)
[    2.953993] hidraw: raw HID events driver (C) Jiri Kosina
[    2.964847] ata3.00: ATA-7: ST3250824AS, 3.AAE, max UDMA/133
[    2.964854] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.007024] usbcore: registered new interface driver usbhid
[    3.007026] usbhid: USB HID core driver
[    3.013044] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:046D:C31C.0001/input/input6
[    3.019334] ata3.00: configured for UDMA/133
[    3.019549] scsi 2:0:0:0: Direct-Access     ATA      ST3250824AS      E    PQ: 0 ANSI: 5
[    3.048417] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.048441] sd 2:0:0:0: [sda] Write Protect is off
[    3.048444] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.048483] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.048918] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.072189] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input0
[    3.073261] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:046D:C31C.0002/input/input7
[    3.091892]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    3.092663] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.104165] firewire_core 0000:02:03.0: created device fw0: GUID 0010dc0000f7b2f9, S400
[    3.132494] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input1
[    3.640040] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[    3.804141] clocksource: Switched to clocksource tsc
[    3.829999] usb 4-2: New USB device found, idVendor=046d, idProduct=c502
[    3.830003] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.830005] usb 4-2: Product: USB Receiver
[    3.830007] usb 4-2: Manufacturer: Logitech
[    3.849215] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:046D:C502.0003/input/input8
[    3.908174] hid-generic 0003:046D:C502.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[    3.936589] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:046D:C502.0004/input/input9
[    3.996038] usb 1-7: new high-speed USB device number 5 using ehci-pci
[    3.996220] hid-generic 0003:046D:C502.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[    4.227536] usb 1-7: New USB device found, idVendor=0424, idProduct=2228
[    4.227540] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.227543] usb 1-7: Product: Flash Card Reader
[    4.227545] usb 1-7: Manufacturer: Generic
[    4.227547] usb 1-7: SerialNumber: 000022272228
[    4.524467] usb-storage 1-7:1.0: USB Mass Storage device detected
[    4.524619] scsi host6: usb-storage 1-7:1.0
[    4.524742] usbcore: registered new interface driver usb-storage
[    4.530418] usbcore: registered new interface driver uas
[    4.723497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.541737] scsi 6:0:0:0: Direct-Access     Generic  Flash HS-CF      4.52 PQ: 0 ANSI: 0
[    5.544969] scsi 6:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   4.52 PQ: 0 ANSI: 0
[    5.548343] scsi 6:0:0:2: Direct-Access     Generic  Flash HS-SM      4.52 PQ: 0 ANSI: 0
[    5.548747] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    5.549041] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    5.549296] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    5.623591] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    5.627714] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    5.631710] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    5.914175] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.914408] systemd[1]: Detected architecture x86.
[    5.919072] random: crng init done
[    5.937786] systemd[1]: Set hostname to <morteus-MS-7187>.
[    7.171537] systemd[1]: Reached target Encrypted Volumes.
[    7.171731] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.171797] systemd[1]: Listening on udev Kernel Socket.
[    7.171877] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.171978] systemd[1]: Listening on Journal Socket.
[    7.172035] systemd[1]: Reached target Remote File Systems (Pre).
[    7.172058] systemd[1]: Reached target Remote File Systems.
[    7.970395] lp: driver loaded but no devices found
[    8.072740] ppdev: user-space parallel port driver
[    8.176837] parport_pc 00:04: reported by Plug and Play ACPI
[    8.176923] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    8.272126] lp0: using parport0 (interrupt-driven).
[   17.435955] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.718323] systemd-journald[228]: Received request to flush runtime journal from PID 1
[   18.190375] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.351842] media: Linux media interface: v0.10
[   18.391839] Linux video capture interface: v2.00
[   18.486693] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20170531/utaddress-247)
[   18.486720] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.486730] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20170531/utaddress-247)
[   18.486746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.486751] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO) (20170531/utaddress-247)
[   18.486766] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000490-0x0000000000000490 (\PALD) (20170531/utaddress-247)
[   18.486781] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.486786] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.516237] leds_ss4200: no LED devices found
[   18.559284] audit: type=1400 audit(1517232657.037:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=436 comm="apparmor_parser"
[   18.559305] audit: type=1400 audit(1517232657.037:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=436 comm="apparmor_parser"
[   18.559319] audit: type=1400 audit(1517232657.041:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=437 comm="apparmor_parser"
[   18.559334] audit: type=1400 audit(1517232657.041:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=437 comm="apparmor_parser"
[   18.559345] audit: type=1400 audit(1517232657.041:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=437 comm="apparmor_parser"
[   18.559360] audit: type=1400 audit(1517232657.041:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
[   18.566424] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   18.566968] saa7134: saa7134[0]: found at 0000:02:00.0, rev: 1, irq: 16, latency: 32, mmio: 0xfdeff000
[   18.566986] saa7134: saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
[   18.567043] saa7134: saa7134[0]: board init: gpio is 0
[   18.737752] snd_hda_codec_cmedia hdaudioC0D0: autoconfig for CMI9880: line_outs=4 (0xb/0x20/0x1f/0xe/0x0) type:line
[   18.737767] snd_hda_codec_cmedia hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.737773] snd_hda_codec_cmedia hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.737782] snd_hda_codec_cmedia hdaudioC0D0:    mono: mono_out=0x0
[   18.737787] snd_hda_codec_cmedia hdaudioC0D0:    dig-out=0x12/0x0
[   18.737793] snd_hda_codec_cmedia hdaudioC0D0:    inputs:
[   18.737799] snd_hda_codec_cmedia hdaudioC0D0:      Rear Mic=0xd
[   18.737809] snd_hda_codec_cmedia hdaudioC0D0:      Front Mic=0x10
[   18.737814] snd_hda_codec_cmedia hdaudioC0D0:      Line=0xc
[   18.737820] snd_hda_codec_cmedia hdaudioC0D0:      CD=0x11
[   18.737829] snd_hda_codec_cmedia hdaudioC0D0:      Aux=0xf
[   18.737834] snd_hda_codec_cmedia hdaudioC0D0:    dig-in=0x13
[   18.741713] audit: type=1400 audit(1517232657.224:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3886/usr/lib/snapd/snap-confine" pid=481 comm="apparmor_parser"
[   18.741720] audit: type=1400 audit(1517232657.224:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3886/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=481 comm="apparmor_parser"
[   18.741724] audit: type=1400 audit(1517232657.224:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3886/usr/lib/snapd/snap-confine//snap_update_ns" pid=481 comm="apparmor_parser"
[   18.781327] saa7134: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   18.781331] saa7134: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[   18.781332] saa7134: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b
[   18.781333] saa7134: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[   18.781334] saa7134: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 00 00 fd 79 44 9f c2 8f
[   18.781336] saa7134: i2c eeprom 50: ff ff ff ff ff ff 06 06 0f 00 0f 00 0f 00 0f 00
[   18.781337] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781338] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781339] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781341] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781342] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781343] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781344] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781345] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781347] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.781348] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.867800] saa7134: saa7134[0] Board has DVB-T
[   18.867811] saa7134: saa7134[0] Tuner type is 63
[   18.869693] audit: type=1400 audit(1517232657.352:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=483 comm="apparmor_parser"
[   19.019811] tda9887 5-0043: creating new instance
[   19.019814] tda9887 5-0043: tda988[5/6/7] found
[   19.032050] tuner: 5-0043: Tuner 74 found with type(s) Radio TV.
[   19.048123] tuner: 5-0061: Tuner -1 found with type(s) Radio TV.
[   19.108096] tuner-simple 5-0061: creating new instance
[   19.108104] tuner-simple 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[   19.271213] saa7134: saa7134[0]: registered device video0 [v4l2]
[   19.272015] saa7134: saa7134[0]: registered device vbi0
[   19.272291] saa7134: saa7134[0]: registered device radio0
[   19.364787] saa7134_dvb: dvb_init() allocating 1 frontend
[   19.395451] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded
[   19.395500] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xfdeff000 irq 16 registered as card -2
[   19.480075] tuner-simple 5-0061: attaching existing instance
[   19.480086] tuner-simple 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[   19.480096] dvbdev: DVB: registering new adapter (saa7134[0])
[   19.480112] saa7134 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   19.632108] tda1004x: setting up plls for 53MHz sampling clock
[   19.660172] intel_powerclamp: No package C-state available
[   19.722784] intel_powerclamp: No package C-state available
[   20.449567] rtl8192cu: Chip version 0x10
[   20.546816] rtl8192cu: Board Type 0
[   20.547061] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   20.547103] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   20.562423] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   20.562883] usbcore: registered new interface driver rtl8192cu
[   20.584052] usbcore: registered new interface driver rtl8xxxu
[   21.596080] tda1004x: found firmware revision 29 -- ok
[   21.955951] rtl8192cu 1-1:1.0 wlx0008d395bdfd: renamed from wlan0
[   22.622278] Adding 2094076k swap on /dev/sda5.  Priority:-1 extents:1 across:2094076k FS
[   26.329920] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[   26.348978] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[   26.352176] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[   26.352346] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[   26.360858] IPv6: ADDRCONF(NETDEV_UP): wlx0008d395bdfd: link is not ready
[   26.362869] rtl8192cu: MAC auto ON okay!
[   26.395512] rtl8192cu: Tx queue select: 0x05
[   26.933284] IPv6: ADDRCONF(NETDEV_UP): wlx0008d395bdfd: link is not ready
[   27.317150] IPv6: ADDRCONF(NETDEV_UP): wlx0008d395bdfd: link is not ready
[   27.844770] kauditd_printk_skb: 18 callbacks suppressed
[   27.844772] audit: type=1400 audit(1517232666.327:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3886/usr/lib/snapd/snap-confine" pid=1010 comm="apparmor_parser"
[   27.856567] audit: type=1400 audit(1517232666.339:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3886/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1010 comm="apparmor_parser"
[   27.856870] audit: type=1400 audit(1517232666.339:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3886/usr/lib/snapd/snap-confine//snap_update_ns" pid=1010 comm="apparmor_parser"
[   27.938409] audit: type=1400 audit(1517232666.421:33): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1073 comm="apparmor_parser"
[   28.895833] audit: type=1400 audit(1517232667.378:34): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gedit.gedit" pid=1207 comm="apparmor_parser"
morteus@morteus-MS-7187:~$

PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#6 Le 29/01/2018, à 14:36

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

morteus@morteus-MS-7187:~$ sudo systemd-analyze
[sudo] Mot de passe de morteus : 
Startup finished in 5.494s (kernel) + 26.656s (userspace) = 32.150s
morteus@morteus-MS-7187:~$ sudo systemd-analyze blame
         15.132s dev-sda1.device
          8.957s systemd-udevd.service
          6.418s snapd.service
          6.272s NetworkManager-wait-online.service
          3.344s plymouth-start.service
          2.829s NetworkManager.service
          2.333s ModemManager.service
          2.277s accounts-daemon.service
          2.087s apparmor.service
          1.761s keyboard-setup.service
          1.605s gpu-manager.service
          1.599s networking.service
          1.264s thermald.service
          1.180s lightdm.service
          1.095s upower.service
          1.093s systemd-tmpfiles-setup-dev.service
          1.085s systemd-modules-load.service
           825ms dev-hugepages.mount
           819ms grub-common.service
           812ms dev-loop0.device
           762ms sys-kernel-debug.mount
           761ms dev-mqueue.mount
           757ms dev-loop2.device
lines 1-23

PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#7 Le 29/01/2018, à 14:38

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

sudo  systemd-analyse blame est bloqué  avec lines 1-23 surligné en blanc


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#8 Le 29/01/2018, à 14:39

LukePerp

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Mhilay a écrit :

sudo  systemd-analyse blame est bloqué  avec lines 1-23 surligné en blanc

appuie entrée, plusieurs fois, puis q pour quitter


Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline

Hors ligne

#9 Le 29/01/2018, à 14:42

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

j'ai ouvert un autre terminal pour le dernier

morteus@morteus-MS-7187:~$ sudo systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @26.562s
└─multi-user.target @26.562s
  └─getty.target @26.561s
    └─getty@tty1.service @26.560s
      └─rc-local.service @26.517s +12ms
        └─network-online.target @26.516s
          └─NetworkManager-wait-online.service @20.243s +6.272s
            └─NetworkManager.service @17.412s +2.829s
              └─dbus.service @17.281s
                └─basic.target @17.208s
                  └─sockets.target @17.208s
                    └─snapd.socket @17.133s +67ms
                      └─sysinit.target @17.132s
                        └─swap.target @17.131s
                          └─dev-disk-by\x2duuid-efea27bb\x2dc046\x2d4765\x2dab52
                            └─dev-disk-by\x2duuid-efea27bb\x2dc046\x2d4765\x2dab
lines 1-19/19 (END)

PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#10 Le 29/01/2018, à 14:45

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

j'ai, écrit en rouge:

─rc-local.service @26.517s +12ms
     ─NetworkManager-wait-online.service @20.243s +6.272s
            └─NetworkManager.service @17.412s +2.829s
                 ─snapd.socket @17.133s +67ms
                      dev-disk-by\x2duuid-efea27bb\x2dc046\x2d4765\x2dab52


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#11 Le 29/01/2018, à 14:47

LukePerp

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Peux tu nous dire quel est le type de disque que tu as ? SSD ou disque dur ?
Ton système met 30s pour démarrer, ce qui est raisonnable, ça va.
Il perd 9 s pour une opération liée à la partition système :

[    8.272126] lp0: using parport0 (interrupt-driven).
[   17.435955] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
...
         15.132s dev-sda1.device

On peut faire un diagnostique de la partition.
Donne nous le retour de :

sudo apt-get install smartmontools
sudo smartctl -s on -a /dev/sda1

Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline

Hors ligne

#12 Le 29/01/2018, à 14:50

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

je vous met la fin de
sudo systemd-analyze blame

 757ms dev-loop2.device
           741ms alsa-restore.service
           714ms dev-loop1.device
           705ms systemd-journald.service
           672ms irqbalance.service
           608ms polkitd.service
           578ms udisks2.service
           467ms ufw.service
           461ms console-setup.service
           428ms colord.service
           354ms apport.service
           353ms systemd-journal-flush.service
           316ms systemd-logind.service
           313ms systemd-rfkill.service
           283ms systemd-udev-trigger.service
           280ms rsyslog.service
           249ms ondemand.service
           243ms speech-dispatcher.service
           236ms systemd-update-utmp.service
           214ms dev-disk-by\x2duuid-efea27bb\x2dc046\x2d4765\x2dab52\x2dbce0d58
           189ms systemd-sysctl.service
           173ms avahi-daemon.service
           171ms user@1000.service
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
            26ms systemd-update-utmp-runlevel.service
            12ms rc-local.service
            11ms ureadahead-stop.service
             9ms sys-fs-fuse-connections.mount
             9ms rtkit-daemon.service
             9ms sys-kernel-config.mount
             6ms plymouth-quit-wait.service
lines 46-68/68 (END)
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
            26ms systemd-update-utmp-runlevel.service
            12ms rc-local.service
            11ms ureadahead-stop.service
             9ms sys-fs-fuse-connections.mount
             9ms rtkit-daemon.service
             9ms sys-kernel-config.mount
lines 46-67/68 98%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
            26ms systemd-update-utmp-runlevel.service
            12ms rc-local.service
            11ms ureadahead-stop.service
             9ms sys-fs-fuse-connections.mount
             9ms rtkit-daemon.service
lines 46-66/68 97%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
            26ms systemd-update-utmp-runlevel.service
            12ms rc-local.service
            11ms ureadahead-stop.service
             9ms sys-fs-fuse-connections.mount
lines 46-65/68 95%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
            26ms systemd-update-utmp-runlevel.service
            12ms rc-local.service
            11ms ureadahead-stop.service
lines 46-64/68 94%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
            26ms systemd-update-utmp-runlevel.service
            12ms rc-local.service
lines 46-63/68 92%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
            26ms systemd-update-utmp-runlevel.service
lines 46-62/68 91%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
            39ms systemd-remount-fs.service
lines 46-61/68 89%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
            47ms resolvconf.service
lines 46-60/68 87%
           165ms systemd-user-sessions.service
           162ms kmod-static-nodes.service
           153ms systemd-random-seed.service
           150ms snap-gnome\x2d3\x2d26\x2d1604-28.mount
           145ms pppd-dns.service
           131ms wpa_supplicant.service
           131ms systemd-timesyncd.service
           123ms plymouth-read-write.service
           120ms snap-core-3886.mount
           113ms systemd-tmpfiles-setup.service
           107ms snap-gedit-33.mount
            81ms setvtrgb.service
            67ms snapd.socket
            51ms dns-clean.service
lines 46-59/68 86%

PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#13 Le 29/01/2018, à 14:55

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

c'est un vieux disque dur SATA  de 250 Go et c’est quand j'ai voulu mettre l'autre qu'Ubuntu c'est perdu dans les points de montage.
Au demarrage l'ecran ubuntu disparrait, ecran noir avec une dizaines de lignes qui disparraissent ensuite toujours ecran noir mais j'ai la souris puis ecran de démarrage Ubuntu avec les petits points


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#14 Le 29/01/2018, à 14:58

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

j'ai installé smartmontools

morteus@morteus-MS-7187:~$ sudo smartctl -s on -a /dev/sda1
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.13.0-32-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.9
Device Model:     ST3250824AS
Serial Number:    5ND3QRTK
Firmware Version: 3.AAE
User Capacity:    250 059 350 016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Mon Jan 29 14:56:18 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 100) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   116   094   006    Pre-fail  Always       -       101747314
  3 Spin_Up_Time            0x0003   098   098   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       1021
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail  Always       -       765828423
  9 Power_On_Hours          0x0032   056   056   000    Old_age   Always       -       39337
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1469
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   067   046   045    Old_age   Always       -       33 (Min/Max 19/34)
194 Temperature_Celsius     0x0022   033   054   000    Old_age   Always       -       33 (0 16 0 0 0)
195 Hardware_ECC_Recovered  0x001a   068   049   000    Old_age   Always       -       168610541
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 6 occurred at disk power-on lifetime: 39045 hours (1626 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 fe 12 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  2f 00 01 10 00 00 40 00      01:22:51.018  READ LOG EXT
  60 40 40 00 00 00 00 00      01:22:51.017  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      01:22:51.016  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      01:22:51.015  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      01:22:51.013  READ FPDMA QUEUED

Error 5 occurred at disk power-on lifetime: 39044 hours (1626 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 fe 12 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  2f 00 01 10 00 00 40 00      01:10:55.389  READ LOG EXT
  60 40 40 00 00 00 00 00      01:10:55.387  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      01:10:55.386  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      01:10:55.385  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      01:10:55.404  READ FPDMA QUEUED

Error 4 occurred at disk power-on lifetime: 39043 hours (1626 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 fe 12 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  2f 00 01 10 00 00 40 00      00:54:59.329  READ LOG EXT
  60 40 40 00 00 00 00 00      00:54:59.328  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:54:59.328  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:54:59.327  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:54:59.326  READ FPDMA QUEUED

Error 3 occurred at disk power-on lifetime: 39040 hours (1626 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 fe 12 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  2f 00 01 10 00 00 40 00      00:12:26.260  READ LOG EXT
  60 40 40 00 00 00 00 00      00:12:26.260  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:12:26.259  READ FPDMA QUEUED
  60 08 08 00 00 00 00 00      00:12:26.240  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:12:26.217  READ FPDMA QUEUED

Error 2 occurred at disk power-on lifetime: 39035 hours (1626 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 fe 12 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  2f 00 01 10 00 00 40 00      00:10:00.481  READ LOG EXT
  60 40 40 00 00 00 00 00      00:10:00.480  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:10:00.479  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:10:00.478  READ FPDMA QUEUED
  60 40 40 00 00 00 00 00      00:10:00.478  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     39110         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#15 Le 29/01/2018, à 14:58

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

C'est la première fois que j'ai 3 terminaux ouverts en même temps!


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#16 Le 29/01/2018, à 15:03

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

1626 jours d'utilisation!!!et que 6 erreurs pas graves...pour un vieux DD de plus de 15 ans c'est pas si mal!


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#17 Le 29/01/2018, à 16:20

LukePerp

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Mhilay a écrit :

j'ai installé smartmontools

Ton rapport montre un disque sain, sans anomalie.
Ces valeurs doivent-être proche de zéro, ce qui est le cas :

5 Reallocated_Sector_Ct
10 Spin Retry Count
187 Reported Uncorrectable Errors
197 Current Pending Sector Count
198 (Offline) Uncorrectable Sector Count

Je ne vois pas d'autres pistes pour t'aider.
Si tu vois le menu Grub pour choisir ubuntu au démarrage de la machine, combien de temps ça prends entre l'allumage de la machine et l'affichage du menu grub, en mesurant avec chronomètre ?

Dernière modification par LukePerp (Le 29/01/2018, à 16:22)


Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline

Hors ligne

#18 Le 29/01/2018, à 16:35

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

24.58s pour arriver au grub
48.92 du multiboot à Ubuntu


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#19 Le 29/01/2018, à 16:37

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

avant c’était pareil pour arriver au grub mais  dans les 5 ou 6 secondes pour démarrer la session


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#20 Le 30/01/2018, à 00:00

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Je vais essayer de réaliser la solution de boot-repair en créant une autre partition, mais comme j'en ai déjà 4 je post un autre sujet


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#21 Le 30/01/2018, à 10:01

LukePerp

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

24 secondes entre l'allumage et le menu grub ! Il y a clairement un problème matériel. Je pense à un périphérique qui déconne, soit au niveau de sa connexion, soit en terme d'alimentation. Regardes du coté des périphériques non indispensable, tel que le graveur de disque, les cartes complémentaires optionnelles... C'est à dire, déconnecte-les pour mesurer la différence en démarrant plusieurs fois. Je n'ai pas d'autres pistes, bon courage.


Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline

Hors ligne

#22 Le 30/01/2018, à 10:27

inbox

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Salut,

Au vu de la ligne suivante, extraite du rapport Smart, je penche pour un problème de connectique de ton disque dur :

Hardware_ECC_Recovered  0x001a   068   049   000    Old_age   Always       -       168610541

Ce qui m'incite à penser cela vient aussi de ce qu'a relevé LukePerp à propos de Sda1 :

[    4.723497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.435955] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

15.132s dev-sda1.device

On voit que Sda1 est monté normalement vers 4/5 secondes puis remonté en lecture seule vers 17 secondes.
Cela est confirmé par l'analyse blame de systemd (15 secondes de temps d'accès).

Je te conseille donc de vérifier la connectique Sata de ton disque, côté disque et côté carte mère. Débranche et rebranche en faisant bien attention à ce que le câble soit bien enfoncé.

Si le problème persiste (démarrage long et valeur de "Hardware_ECC_Recovered" qui augmente), il faudra changer le câble Sata.

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#23 Le 30/01/2018, à 10:47

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

Oui, mais en fait il à toujours été comme ça...Déjà il reste au moins 10/15 secondes sur le logo Intel avant de lancer Dos ,c'est vrai qu' entre autre, le pilote de disquette n'a rien à faire encore ici, mais bon, c"est plutôt les 50 secondes après avoir lancé Ubuntu qui pose problème!
Là je suis sous windows10 pour voir ce que je peut faire pour ses partitions, histoire de voir si je peux ramener la partition incriminée au début du disque vu que j'en ai déjà 4, je ne peux pas faire la réparation suggérée par boot-repair.
Mais déjà sur les 6 choix que j'avais au Grub2 j'en ai plus que 3 (Ubuntu, Ubuntu 386... et win10) et je sais pas quelles actions on permis ça mais bon.
De toute façon j'ai fait une sauvegarde complète des 2 systèmes sur usb, et j'ai toujours les 2 liveUSB donc en cas de plantage je pourrais toujours reformater le DD et refaire les 2 partitions système car il est là le soucis.
La dernière fois j'ai monté les 3 partitions pour ubuntu laissant windows s'installer sur celle non-allouée et du coup je me suis retrouvé tout de suite avec les 4 partitions...
Comme win fonctionne très bien (mème avec le jeu Resident evil 6, pas de lag ni bug et pourtant toujours qu'avec 4G de RAM) mais je ne peux rien faire pour cette partition si ce n'est que la démontée pour ensuite la déplacer mais...est-ce bien celle que je pense!


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne

#24 Le 30/01/2018, à 10:48

moko138

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

OK pour nettoyer les interfaces Sata ! (avec pinceau et bombe à air dépoussiéré.)

Mais les deux lignes :

[    4.723497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.435955] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

sont présentes à chaque démarrage
et la seconde est la stricte application du fstab :

UUID=(...)   /      ext4    errors=remount-ro    0    1

i.e. « option : en cas d'erreur, remonter la racine en lecture seule ».


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#25 Le 30/01/2018, à 11:17

Mhilay

Re : [ABANDONNE]Lenteur extrème au démarrage d'Ubuntu 16.04LTS

attend! je suis sous win pour faire une capture d'écran des partitions
Voici le lien http://pix.toile-libre.org/?img=1517307326.png
Et j'y retourne avec mon, chrono


PC d'origine thinkcentre A55 équipé gigabyte AMD FX 3,8GHz (OC 4GHz), 24Go de RAM,DD windows10 2To,DD ubuntu 18.04LTS 365Go, DD sauvegardes mixte 1To et DD divers 160Go.
Acharnée, jeune, j'apprends sur le tas et que les erreurs font partie du jeu mais toujours avoir un clone de son système au cas où !

Hors ligne