#1 Le 07/01/2018, à 13:46
- Gégé13821
[Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage trés longue.
Bonjour,
Depuis un certain temps, mon PC met beaucoup de temps à démarrer - plus de 2 minutes.
Il a déjà démarré en quelques secondes (depuis que j'avais installé le système sur un SSD).
Résultat de dmesg
[ 10.024336] audit: type=1400 audit(1515056546.837:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=727 comm="apparmor_parser"
[ 99.197031] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 99.197282] enp2s0: 0xffffb25e0064d000, d4:3d:7e:9c:c3:b0, IRQ 25
[ 99.269149] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 102.356192] r8168: enp2s0: link up
[ 102.356227] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes readyOn voit qu'il passe 1 mn 30 à attendre une configuration réseau.
Résultat de lspci -v (pour la carte réseau)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Micro-Star International Co., Ltd. [MSI] RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 25
I/O ports at e800 [size=256]
Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8168
Kernel modules: r8168Le module utilisé est r8168. C'était initialement r8169, mais suite à l'apparition du phénomène j'ai remis l'ancien module - ce qui n'a absolument rien changé.
A toutes fins utiles, résultat d'un boot-info
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Windows 7/8/2012 is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
:Comment ne pas perdre 1mn30s au démarrage ?
Merci pour votre aide.
Dernière modification par Gégé13821 (Le 07/01/2018, à 16:53)
Gérard ALQUIER
-------------------------------------------------------------------------
La théorie c'est quand on sait tout et que rien ne fonctionne. La pratique c'est quand tout fonctionne et que personne ne sait pourquoi. Moi j'ai réuni théorie et pratique : Rien ne fonctionne... et personne ne sait pourquoi !
Hors ligne
#2 Le 07/01/2018, à 14:48
- malbo
Re : [Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage trés longue.
Bonjour,
Donne l'URL du Boot-Info parce que tu n'as collé qu'on tout petit morceau du Boot-Info dans le post #1. Ou bien refais un Boot-Info.
Hors ligne
#3 Le 07/01/2018, à 15:16
- Gégé13821
Re : [Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage trés longue.
Merci pour cette réponse rapide.
Quand je lance le boot-info, j'obtiens une rreur dans le terminal :
(glade2script:25597): Gtk-WARNING **: Unknown key gtk-primaire-button-chaines-curseur in /home/aqr/.config/gtk-3.0/settings.iniJe n'obtiens pas le lien vers l'URL seul le fichier texte :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Windows 7/8/2012 is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda2
and looks at sector 416562016 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 16.04.3 LTS
Boot files: /etc/fstab /bootmgr
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Debian GNU/Linux 9 (stretch)
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 407,422,975 407,420,928 7 NTFS / exFAT / HPFS
/dev/sda2 * 407,422,976 468,860,475 61,437,500 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 63 512,007,614 512,007,552 83 Linux
/dev/sdb2 512,007,615 1,024,015,229 512,007,615 7 NTFS / exFAT / HPFS
/dev/sdb3 1,945,326,915 1,953,520,064 8,193,150 82 Linux swap / Solaris
/dev/sdb4 1,024,016,384 1,945,325,567 921,309,184 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 1BFC96F57B187D86 ntfs Windows
/dev/sda2 2c0b7666-c61d-4d61-b04a-a69167e61fa2 ext4
/dev/sdb1 5f9b7144-8727-4efc-8579-865e22ae1f72 ext4 LinuxHome
/dev/sdb2 6CF6333257132428 ntfs Windows
/dev/sdb3 7ee20568-69b4-4008-bd9b-1561efd79793 swap
/dev/sdb4 a7653b37-72bc-4ac6-841b-2db68eec53b2 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 7 14:08 ata-SPCC_Solid_State_Disk_8E310767170805208079 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 7 14:08 ata-SPCC_Solid_State_Disk_8E310767170805208079-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 7 14:08 ata-SPCC_Solid_State_Disk_8E310767170805208079-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jan 7 14:08 ata-ST31000524NS_9WK2L2GP -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 7 14:08 ata-ST31000524NS_9WK2L2GP-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 7 14:08 ata-ST31000524NS_9WK2L2GP-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 7 14:08 ata-ST31000524NS_9WK2L2GP-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 7 14:08 ata-ST31000524NS_9WK2L2GP-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 9 Jan 4 10:02 ata-TSSTcorp_CDDVDW_SH-224BB_R8WS6GAD201MYW -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 4 10:02 usb-Brother_DCP-357C_BROF8F675136-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 Jan 7 14:08 wwn-0x5000c5002d33081f -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 7 14:08 wwn-0x5000c5002d33081f-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 7 14:08 wwn-0x5000c5002d33081f-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 7 14:08 wwn-0x5000c5002d33081f-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 7 14:08 wwn-0x5000c5002d33081f-part4 -> ../../sdb4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1 /home ext4 (rw,relatime,data=ordered)
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb1 during installation
UUID=5f9b7144-8727-4efc-8579-865e22ae1f72 /home ext4 defaults 0 2
# swap was on /dev/sdb3 during installation
UUID=24fd6ae4-422c-4eb6-b93d-8f925be2d5ea none swap sw 0 0
#
##########################################################
# Modifié pour monter les dir partagés du syno au boot #
##########################################################
#
//AQRnology/video/ /media/aqr/VideoServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/photo/ /media/aqr/ImageServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/ServDocuments/ /media/aqr/DocServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/music/ /media/aqr/MusicServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/Téléchargements/ /media/aqr/TelechServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
#/dev/disk/by-uuid/1fa708d3-c9b0-4fdd-a922-a2fa905328c8 /mnt/1fa708d3-c9b0-4fdd-a922-a2fa905328c8 auto nosuid,nodev,nofail,x-gvfs-show,noauto 0 0
/dev/disk/by-id/usb-Generic_STORAGE_DEVICE_000000009451-0:0-part1 /mnt/usb-Generic_STORAGE_DEVICE_000000009451-0:0-part1 auto nosuid,nodev,nofail,noauto 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
204.656311035 = 219.748040704 boot/vmlinuz-4.10.0-40-generic 1
217.687561035 = 233.740238848 boot/vmlinuz-4.10.0-42-generic 1
216.883460999 = 232.876843008 boot/vmlinuz-4.8.0-42-generic 1
217.687561035 = 233.740238848 vmlinuz 1
204.656311035 = 219.748040704 vmlinuz.old 1
196.334873199 = 210.812964864 boot/initrd.img-4.10.0-40-generic 3
215.102535248 = 230.964588544 boot/initrd.img-4.10.0-42-generic 4
199.398017883 = 214.101991424 boot/initrd.img-4.8.0-42-generic 1
215.102535248 = 230.964588544 initrd.img 4
196.334873199 = 210.812964864 initrd.img.old 3
=========================== sdb4/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos4 --hint-efi=hd1,msdos4 --hint-baremetal=ahci1,msdos4 a7653b37-72bc-4ac6-841b-2db68eec53b2
else
search --no-floppy --fs-uuid --set=root a7653b37-72bc-4ac6-841b-2db68eec53b2
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR@euro
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='hd1,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos4 --hint-efi=hd1,msdos4 --hint-baremetal=ahci1,msdos4 a7653b37-72bc-4ac6-841b-2db68eec53b2
else
search --no-floppy --fs-uuid --set=root a7653b37-72bc-4ac6-841b-2db68eec53b2
fi
insmod png
if background_image /usr/share/desktop-base/softwaves-theme/grub/grub-4x3.png; then
set color_normal=white/black
set color_highlight=black/white
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
}
set linux_gfx_mode=keep
export linux_gfx_mode
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a7653b37-72bc-4ac6-841b-2db68eec53b2' {
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos4 --hint-efi=hd1,msdos4 --hint-baremetal=ahci1,msdos4 a7653b37-72bc-4ac6-841b-2db68eec53b2
else
search --no-floppy --fs-uuid --set=root a7653b37-72bc-4ac6-841b-2db68eec53b2
fi
echo 'Chargement de Linux 4.9.0-4-amd64...'
linux /boot/vmlinuz-4.9.0-4-amd64 root=UUID=a7653b37-72bc-4ac6-841b-2db68eec53b2 ro quiet splash plymouth.ignore-serial-consoles
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-4.9.0-4-amd64
}
submenu 'Options avancées pour Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-a7653b37-72bc-4ac6-841b-2db68eec53b2' {
menuentry 'Debian GNU/Linux, avec Linux 4.9.0-4-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.9.0-4-amd64-advanced-a7653b37-72bc-4ac6-841b-2db68eec53b2' {
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos4 --hint-efi=hd1,msdos4 --hint-baremetal=ahci1,msdos4 a7653b37-72bc-4ac6-841b-2db68eec53b2
else
search --no-floppy --fs-uuid --set=root a7653b37-72bc-4ac6-841b-2db68eec53b2
fi
echo 'Chargement de Linux 4.9.0-4-amd64...'
linux /boot/vmlinuz-4.9.0-4-amd64 root=UUID=a7653b37-72bc-4ac6-841b-2db68eec53b2 ro quiet splash plymouth.ignore-serial-consoles
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-4.9.0-4-amd64
}
menuentry 'Debian GNU/Linux, with Linux 4.9.0-4-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.9.0-4-amd64-recovery-a7653b37-72bc-4ac6-841b-2db68eec53b2' {
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos4 --hint-efi=hd1,msdos4 --hint-baremetal=ahci1,msdos4 a7653b37-72bc-4ac6-841b-2db68eec53b2
else
search --no-floppy --fs-uuid --set=root a7653b37-72bc-4ac6-841b-2db68eec53b2
fi
echo 'Chargement de Linux 4.9.0-4-amd64...'
linux /boot/vmlinuz-4.9.0-4-amd64 root=UUID=a7653b37-72bc-4ac6-841b-2db68eec53b2 ro single
echo 'Chargement du disque mémoire initial...'
initrd /boot/initrd.img-4.9.0-4-amd64
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-1BFC96F57B187D86' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1BFC96F57B187D86
else
search --no-floppy --fs-uuid --set=root 1BFC96F57B187D86
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Ubuntu 16.04.3 LTS (16.04) (sur /dev/sda2)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.10.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-42-generic
}
submenu 'Options avancées pour Ubuntu 16.04.3 LTS (16.04) (sur /dev/sda2)' $menuentry_id_option 'osprober-gnulinux-advanced-2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
menuentry 'Ubuntu (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-42-generic--2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.10.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-42-generic
}
menuentry 'Ubuntu, avec Linux 4.10.0-42-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-42-generic--2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.10.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-42-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-42-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-42-generic-root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro recovery nomodeset-2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.10.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro recovery nomodeset
initrd /boot/initrd.img-4.10.0-42-generic
}
menuentry 'Ubuntu, avec Linux 4.10.0-40-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-40-generic--2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.10.0-40-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-40-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-40-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-40-generic-root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro recovery nomodeset-2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.10.0-40-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro recovery nomodeset
initrd /boot/initrd.img-4.10.0-40-generic
}
menuentry 'Ubuntu, avec Linux 4.8.0-42-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-42-generic--2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.8.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-42-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-42-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-42-generic-root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro recovery nomodeset-2c0b7666-c61d-4d61-b04a-a69167e61fa2' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 2c0b7666-c61d-4d61-b04a-a69167e61fa2
else
search --no-floppy --fs-uuid --set=root 2c0b7666-c61d-4d61-b04a-a69167e61fa2
fi
linux /boot/vmlinuz-4.8.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro recovery nomodeset
initrd /boot/initrd.img-4.8.0-42-generic
}
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb4/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb4 during installation
UUID=a7653b37-72bc-4ac6-841b-2db68eec53b2 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb3 during installation
UUID=7ee20568-69b4-4008-bd9b-1561efd79793 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
# a swapfile is not a swap partition, no line here
# use dphys-swapfile swap[on|off] for that
--------------------------------------------------------------------------------
=================== sdb4: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
680.532733917 = 730.716459008 boot/grub/grub.cfg 3
800.435783386 = 859.461378048 boot/grub/i386-pc/core.img 1
490.792984009 = 526.984953856 boot/vmlinuz-4.9.0-4-amd64 1
490.792984009 = 526.984953856 vmlinuz 1
490.792984009 = 526.984953856 vmlinuz.old 1
489.818752289 = 525.938880512 boot/initrd.img-4.9.0-4-686-pae.old-dkms 2
489.795215607 = 525.913608192 boot/initrd.img-4.9.0-4-686.old-dkms 2
680.533748627 = 730.717548544 boot/initrd.img-4.9.0-4-amd64 3
680.533748627 = 730.717548544 initrd.img 3
680.533748627 = 730.717548544 initrd.img.old 3
========= Devices which don't seem to have a corresponding hard drive: =========
sdc
ADDITIONAL INFORMATION :
=================== log of boot-info 20180107_1407 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux
/dev/sda1:Windows 10 (loader):Windows:chain
/dev/sdb4:Debian GNU/Linux (9.3):Debian:linux
=================== blkid:
/dev/sda1: LABEL="Windows" UUID="1BFC96F57B187D86" TYPE="ntfs" PARTUUID="000322a0-01"
/dev/sda2: UUID="2c0b7666-c61d-4d61-b04a-a69167e61fa2" TYPE="ext4" PTTYPE="dos" PARTUUID="000322a0-02"
/dev/sdb1: LABEL="LinuxHome" UUID="5f9b7144-8727-4efc-8579-865e22ae1f72" TYPE="ext4" PARTUUID="9e0a0187-01"
/dev/sdb2: LABEL="Windows" UUID="6CF6333257132428" TYPE="ntfs" PARTUUID="9e0a0187-02"
/dev/sdb3: UUID="7ee20568-69b4-4008-bd9b-1561efd79793" TYPE="swap" PARTUUID="9e0a0187-03"
/dev/sdb4: UUID="a7653b37-72bc-4ac6-841b-2db68eec53b2" TYPE="ext4" PARTUUID="9e0a0187-04"
2 disks with OS, 3 OS : 2 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 3 root root 4096 janv. 3 21:13 grub.d
total 84
-rwxr-xr-x 1 root root 9791 janv. 13 2017 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mai 20 2017 10_linux
-rwxr-xr-x 1 root root 11082 janv. 13 2017 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 janv. 13 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 janv. 13 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 janv. 13 2017 40_custom
-rwxr-xr-x 1 root root 216 janv. 13 2017 41_custom
drwxr-xr-x 4 root root 4096 janv. 3 21:13 backup
-rw-r--r-- 1 root root 483 janv. 13 2017 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb4/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 janv. 3 19:59 grub.d
total 76
-rwxr-xr-x 1 root root 9783 févr. 11 2017 00_header
-rwxr-xr-x 1 root root 6258 févr. 11 2017 05_debian_theme
-rwxr-xr-x 1 root root 12425 févr. 11 2017 10_linux
-rwxr-xr-x 1 root root 11281 févr. 11 2017 20_linux_xen
-rwxr-xr-x 1 root root 12059 févr. 11 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 févr. 11 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 févr. 11 2017 40_custom
-rwxr-xr-x 1 root root 216 févr. 11 2017 41_custom
-rw-r--r-- 1 root root 483 févr. 11 2017 README
=================== sdb4/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash plymouth.ignore-serial-consoles"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_GFXPAYLOAD_LINUX="keep"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, no-grubenv grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, bootmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda1.
sdb1 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sdb4 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb4.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 63 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:240GB:scsi:512:512:msdos:ATA SPCC Solid State:;
1:1049kB:209GB:209GB:ntfs::;
2:209GB:240GB:31.5GB:ext4::boot;
BYT;
/dev/sdb:1000GB:scsi:512:512:msdos:ATA ST31000524NS:;
1:32.3kB:262GB:262GB:ext4::;
2:262GB:524GB:262GB:ntfs::;
4:524GB:996GB:472GB:ext4::;
3:996GB:1000GB:4195MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 931,5G
sdb4 part ext4 439,3G
sdb2 part ntfs 244,1G Windows
sdb3 part swap 3,9G
sdb1 part ext4 244,1G LinuxHome
sr0 rom 1024M
sda disk 223,6G
sda2 part ext4 29,3G
sda1 part ntfs 194,3G Windows
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 1 0 0 running
sdb4 1 0 0 /mnt/boot-sav/sdb4
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdb3 1 0 0
sdb1 1 0 0 /home
sr0 1 0 1 running
sda 0 0 0 running
sda2 0 0 0 /
sda1 0 0 0 /mnt/boot-sav/sda1
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1836492k,nr_inodes=459123,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=378356k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=748)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sdb1 on /home type ext4 (rw,relatime,data=ordered)
//AQRnology/Téléchargements/ on /media/aqr/TelechServ type cifs (rw,nosuid,nodev,noexec,relatime,vers=1.0,cache=strict,username=aqr,domain=,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.43,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1,_netdev,user)
//AQRnology/music/ on /media/aqr/MusicServ type cifs (rw,nosuid,nodev,noexec,relatime,vers=1.0,cache=strict,username=aqr,domain=,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.43,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1,_netdev,user)
//AQRnology/photo/ on /media/aqr/ImageServ type cifs (rw,nosuid,nodev,noexec,relatime,vers=1.0,cache=strict,username=aqr,domain=,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.43,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1,_netdev,user)
//AQRnology/ServDocuments/ on /media/aqr/DocServ type cifs (rw,nosuid,nodev,noexec,relatime,vers=1.0,cache=strict,username=aqr,domain=,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.43,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1,_netdev,user)
//AQRnology/video/ on /media/aqr/VideoServ type cifs (rw,nosuid,nodev,noexec,relatime,vers=1.0,cache=strict,username=aqr,domain=,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.43,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1,_netdev,user)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=378356k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
gvfsd-fuse on /home/aqr/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb4 on /mnt/boot-sav/sdb4 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 sdb4 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kfd kmsg kvm lightnvm log lp0 mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb2 sdb3 sdb4 sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff bf 48 18 00 00 00 00 |..........H.....|
00000030 04 00 00 00 00 00 00 00 ff 8b 84 01 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 86 7d 18 7b f5 96 fc 1b |.........}.{....|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 bf 9d 84 1e |........?.......|
00000020 00 00 00 00 80 00 80 00 be 9d 84 1e 00 00 00 00 |................|
00000030 04 00 00 00 00 00 00 00 db 49 e8 01 00 00 00 00 |.........I......|
00000040 f6 00 00 00 01 00 00 00 28 24 13 57 32 33 f6 6c |........($.W23.l|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.8G 0 1.8G 0% /dev
tmpfs tmpfs 370M 11M 359M 3% /run
/dev/sda2 ext4 29G 6.6G 21G 25% /
tmpfs tmpfs 1.9G 28M 1.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/sdb1 ext4 241G 132G 96G 58% /home
//AQRnology/Téléchargements/ cifs 1.8T 831G 999G 46% /media/aqr/TelechServ
//AQRnology/music/ cifs 1.8T 831G 999G 46% /media/aqr/MusicServ
//AQRnology/photo/ cifs 1.8T 831G 999G 46% /media/aqr/ImageServ
//AQRnology/ServDocuments/ cifs 1.8T 831G 999G 46% /media/aqr/DocServ
//AQRnology/video/ cifs 1.8T 831G 999G 46% /media/aqr/VideoServ
tmpfs tmpfs 370M 40K 370M 1% /run/user/1000
/dev/sda1 fuseblk 195G 103G 92G 54% /mnt/boot-sav/sda1
/dev/sdb2 fuseblk 245G 11G 234G 5% /mnt/boot-sav/sdb2
/dev/sdb4 ext4 432G 4.3G 406G 2% /mnt/boot-sav/sdb4
=================== fdisk -l:
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000322a0
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 407422975 407420928 194.3G 7 HPFS/NTFS/exFAT
/dev/sda2 * 407422976 468860475 61437500 29.3G 83 Linux
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x9e0a0187
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 512007614 512007552 244.1G 83 Linux
/dev/sdb2 512007615 1024015229 512007615 244.1G 7 HPFS/NTFS/exFAT
/dev/sdb3 1945326915 1953520064 8193150 3.9G 82 Linux swap / Solaris
/dev/sdb4 1024016384 1945325567 921309184 439.3G 83 Linux
Partition table entries are not in disk order.
(zenity:15369): Gtk-WARNING **: Unknown key gtk-primaire-button-chaines-curseur in /home/aqr/.config/gtk-3.0/settings.ini
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
User choice: Est-ce que sda (ATA SPCC Solid State) est un disque amovible ? no
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda2 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA SPCC Solid State) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.3 LTS (boot)] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer aprÚs avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.Dans mon message précédent le boot-info c'était ouvert dans un terminal, je n'avais pas vu que la commande "tout sélectionner" n'avait sélectionné que le texte visible !!!
Nouveau boot-info copié depuis gedit.
Merci pour votre aide.
Gérard ALQUIER
-------------------------------------------------------------------------
La théorie c'est quand on sait tout et que rien ne fonctionne. La pratique c'est quand tout fonctionne et que personne ne sait pourquoi. Moi j'ai réuni théorie et pratique : Rien ne fonctionne... et personne ne sait pourquoi !
Hors ligne
#4 Le 07/01/2018, à 15:27
- malbo
Re : [Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage trés longue.
Je crois que c'est cette partie du fichier /etc/fstab de sda2 qui pose problème :
//AQRnology/video/ /media/aqr/VideoServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/photo/ /media/aqr/ImageServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/ServDocuments/ /media/aqr/DocServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/music/ /media/aqr/MusicServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
//AQRnology/Téléchargements/ /media/aqr/TelechServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
#/dev/disk/by-uuid/1fa708d3-c9b0-4fdd-a922-a2fa905328c8 /mnt/1fa708d3-c9b0-4fdd-a922-a2fa905328c8 auto nosuid,nodev,nofail,x-gvfs-show,noauto 0 0
/dev/disk/by-id/usb-Generic_STORAGE_DEVICE_000000009451-0:0-part1 /mnt/usb-Generic_STORAGE_DEVICE_000000009451-0:0-part1 auto nosuid,nodev,nofail,noauto 0 0Je te suggère de tout commenter (mettre le caractère # en tête de toutes les lignes) là-dedans afin que ce soit pris comme du commentaire. Après modif, ça doit donner ça :
#//AQRnology/video/ /media/aqr/VideoServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
#//AQRnology/photo/ /media/aqr/ImageServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
#//AQRnology/ServDocuments/ /media/aqr/DocServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
#//AQRnology/music/ /media/aqr/MusicServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
#//AQRnology/Téléchargements/ /media/aqr/TelechServ cifs _netdev,credentials=/home/aqr/.cred,user,auto,rw 0 0
#/dev/disk/by-uuid/1fa708d3-c9b0-4fdd-a922-a2fa905328c8 /mnt/1fa708d3-c9b0-4fdd-a922-a2fa905328c8 auto nosuid,nodev,nofail,x-gvfs-show,noauto 0 0
#/dev/disk/by-id/usb-Generic_STORAGE_DEVICE_000000009451-0:0-part1 /mnt/usb-Generic_STORAGE_DEVICE_000000009451-0:0-part1 auto nosuid,nodev,nofail,noauto 0 0Après ça, tu devrais obtenir un temps de démarrage beaucoup plus court. Il faudra alors que tu tentes de rétablir une par une les lignes de montage commentées en vérifiant qu'il n'y a pas de retour au temps de démarrage long. Si tu décommentes une ligne et que ça fait revenir le démarrage long, tu la recommentes immédiatement.
Dernière modification par malbo (Le 07/01/2018, à 15:31)
Hors ligne
#5 Le 07/01/2018, à 15:35
- malbo
Re : [Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage trés longue.
Oublie mon post précédent.
Il faut juste remplacer la ligne suivante du fstab :
UUID=24fd6ae4-422c-4eb6-b93d-8f925be2d5ea none swap sw 0 0Par cette ligne :
UUID=7ee20568-69b4-4008-bd9b-1561efd79793 none swap sw 0 0Motif : l'UUID de la partition swap sdb3 a été modifié lors de l'installation de Debian. C'est l'installateur de Debian qui a fait ça.
Dernière modification par malbo (Le 07/01/2018, à 15:38)
Hors ligne
#6 Le 07/01/2018, à 16:21
- Gégé13821
Re : [Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage trés longue.
Pour la correction, j'ai procédé en trois étapes :
Première étape : commenter les lignes dans le fichiers fstab.
Au redémarrage, rien ne change, temps trop long.
Deuxième étape : modifier l'UUID du swap.
Au redémarrage, YES !!! gain de temps.
Troisième étape : dé-commenter les lignes de connexion au serveur.
Au redémarrage, YES, le temps de démarrage n'augmente pas.
Résultat : démarrage en 52 s (144 s auparavant).
Contenu de la commande dmesg :
aqr@aqr-bureau:~$ dmesg
[ 0.000000] Linux version 4.10.0-42-generic (buildd@lgw01-amd64-007) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #46~16.04.1-Ubuntu SMP Mon Dec 4 15:57:59 UTC 2017 (Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: MSI MS-7641/760GM-P34(FX) (MS-7641) , BIOS V17.13 12/14/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9d97800ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9d9780099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x72e28000, 0x72e28fff] PGTABLE
[ 0.000000] BRK [0x72e29000, 0x72e29fff] PGTABLE
[ 0.000000] BRK [0x72e2a000, 0x72e2afff] PGTABLE
[ 0.000000] BRK [0x72e2b000, 0x72e2bfff] PGTABLE
[ 0.000000] BRK [0x72e2c000, 0x72e2cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x32fea000-0x357ecfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F8CD0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000CFF90000 00003C (v01 7641MS A7641100 20121214 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFF90200 000084 (v01 7641MS A7641100 20121214 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000CFF90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFF9E000 000040
[ 0.000000] ACPI: APIC 0x00000000CFF90390 00010C (v01 7641MS A7641100 20121214 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFF904A0 00003C (v01 7641MS OEMMCFG 20121214 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFF9E040 000072 (v01 7641MS A7641100 20121214 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFF9A660 000038 (v01 7641MS OEMHPET 20121214 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000CFF9A6A0 0008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11ffd3000-0x11fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff8ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.000000] On node 0 totalpages: 982830
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847760 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 24 CPUs, 20 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff9d989b400000 s107992 r8192 d31272 u262144
[ 0.000000] pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 967450
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=2c0b7666-c61d-4d61-b04a-a69167e61fa2 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3672952K/3931320K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 258368K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=24
[ 0.000000] NR_IRQS:524544 nr_irqs:616 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3400.001 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.00 BogoMIPS (lpj=13600004)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20160930
[ 0.003087] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.003130] Security Framework initialized
[ 0.003132] Yama: becoming mindful.
[ 0.003159] AppArmor: AppArmor initialized
[ 0.003370] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004846] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005536] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005540] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005843] CPU: Physical Processor ID: 0
[ 0.005844] CPU: Processor Core ID: 0
[ 0.005845] mce: CPU supports 6 MCE banks
[ 0.005851] LVT offset 0 assigned for vector 0xf9
[ 0.005854] process: using AMD E400 aware idle routine
[ 0.005855] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.005856] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.006837] Freeing SMP alternatives memory: 32K
[ 0.015040] process: System has AMD C1E enabled
[ 0.015042] ftrace: allocating 34227 entries in 134 pages
[ 0.027634] smpboot: Max logical packages: 6
[ 0.027646] Switched APIC routing to physical flat.
[ 0.027998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.174953] process: Switch to broadcast mode on CPU0
[ 0.174959] smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (family: 0x10, model: 0x4, stepping: 0x3)
[ 0.175019] Performance Events: AMD PMU driver.
[ 0.175023] ... version: 0
[ 0.175023] ... bit width: 48
[ 0.175023] ... generic registers: 4
[ 0.175024] ... value mask: 0000ffffffffffff
[ 0.175024] ... max period: 00007fffffffffff
[ 0.175025] ... fixed-purpose events: 0
[ 0.175025] ... event mask: 000000000000000f
[ 0.175831] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.175847] smp: Bringing up secondary CPUs ...
[ 0.175933] x86: Booting SMP configuration:
[ 0.175934] .... node #0, CPUs: #1
[ 0.178924] process: Switch to broadcast mode on CPU1
[ 0.179057] #2
[ 0.181602] process: Switch to broadcast mode on CPU2
[ 0.181708] #3
[ 0.184265] process: Switch to broadcast mode on CPU3
[ 0.184303] smp: Brought up 1 node, 4 CPUs
[ 0.184304] smpboot: Total of 4 processors activated (27200.00 BogoMIPS)
[ 0.188974] devtmpfs: initialized
[ 0.189044] x86/mm: Memory block size: 128MB
[ 0.191741] evm: security.selinux
[ 0.191741] evm: security.SMACK64
[ 0.191741] evm: security.SMACK64EXEC
[ 0.191742] evm: security.SMACK64TRANSMUTE
[ 0.191742] evm: security.SMACK64MMAP
[ 0.191742] evm: security.ima
[ 0.191743] evm: security.capability
[ 0.191864] PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
[ 0.191921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.191951] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 0.192078] pinctrl core: initialized pinctrl subsystem
[ 0.192183] RTC time: 14:05:19, date: 01/07/18
[ 0.192269] NET: Registered protocol family 16
[ 0.207004] cpuidle: using governor ladder
[ 0.235007] cpuidle: using governor menu
[ 0.235009] PCCT header not found.
[ 0.235013] node 0 link 0: io port [1000, ffffff]
[ 0.235014] TOM: 00000000d0000000 aka 3328M
[ 0.235016] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.235017] node 0 link 0: mmio [a0000, bffff]
[ 0.235021] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.235023] node 0 link 0: mmio [f0000000, fe9fffff]
[ 0.235024] node 0 link 0: mmio [fea00000, febfffff]
[ 0.235025] node 0 link 0: mmio [fec00000, ffdfffff]
[ 0.235026] TOM2: 0000000130000000 aka 4864M
[ 0.235027] bus: [bus 00-1f] on node 0 link 0
[ 0.235027] bus: 00 [io 0x0000-0xffff]
[ 0.235028] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.235028] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.235029] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.235029] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.235108] ACPI: bus type PCI registered
[ 0.235109] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.235172] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.235174] PCI: not using MMCONFIG
[ 0.235175] PCI: Using configuration type 1 for base access
[ 0.235175] PCI: Using configuration type 1 for extended access
[ 0.235349] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.235349] mtrr: probably your BIOS does not setup all CPUs.
[ 0.235349] mtrr: corrected configuration.
[ 0.251195] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.251196] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.251536] ACPI: Added _OSI(Module Device)
[ 0.251537] ACPI: Added _OSI(Processor Device)
[ 0.251538] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.251538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.251877] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.254660] ACPI: Interpreter enabled
[ 0.254675] ACPI: (supports S0 S1 S4 S5)
[ 0.254675] ACPI: Using IOAPIC for interrupt routing
[ 0.254700] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.255276] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.255288] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.259911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.259915] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.259918] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.260122] PCI host bridge to bus 0000:00
[ 0.260123] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.260124] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.260125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.260126] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.260127] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[ 0.260128] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.260129] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.260136] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.260222] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[ 0.260299] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[ 0.260329] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.260364] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.260412] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.260428] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
[ 0.260436] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
[ 0.260444] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
[ 0.260452] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.260461] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
[ 0.260469] pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.260488] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.260579] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.260591] pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.260676] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.260709] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.260721] pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.260805] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.260839] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.260854] pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.260929] pci 0000:00:12.2: supports D1 D2
[ 0.260930] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.260965] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.261009] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.261021] pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.261106] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.261137] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.261149] pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.261233] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.261268] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.261282] pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.261357] pci 0000:00:13.2: supports D1 D2
[ 0.261358] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.261392] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.261431] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.261563] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.261577] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.261585] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.261593] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.261602] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.261610] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.261628] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.261629] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.261630] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.261631] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.261718] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.261736] pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.261799] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.261833] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.261861] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.261978] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.262043] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.262071] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.262082] pci 0000:00:14.5: reg 0x10: [mem 0xfe9fa000-0xfe9fafff]
[ 0.262166] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.262200] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.262255] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.262308] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.262360] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.262415] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.262511] pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
[ 0.262517] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.262520] pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff]
[ 0.262524] pci 0000:01:05.0: reg 0x18: [mem 0xfebe0000-0xfebeffff]
[ 0.262532] pci 0000:01:05.0: reg 0x24: [mem 0xfea00000-0xfeafffff]
[ 0.262547] pci 0000:01:05.0: supports D1 D2
[ 0.262608] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.262610] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.262612] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
[ 0.262614] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.262649] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.262662] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.262681] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.262692] pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.262754] pci 0000:02:00.0: supports D1 D2
[ 0.262754] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.271009] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.271012] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.271015] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.271090] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.271098] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.271099] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.271100] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.271101] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.271102] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[ 0.271103] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.271715] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 0.271747] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *11 12 14 15)
[ 0.271778] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.271810] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.271841] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.271872] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.271904] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
[ 0.271935] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.272180] SCSI subsystem initialized
[ 0.272223] libata version 3.00 loaded.
[ 0.272263] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[ 0.272265] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.272266] pci 0000:01:05.0: vgaarb: bridge control possible
[ 0.272266] vgaarb: loaded
[ 0.272281] ACPI: bus type USB registered
[ 0.272295] usbcore: registered new interface driver usbfs
[ 0.272302] usbcore: registered new interface driver hub
[ 0.272320] usbcore: registered new device driver usb
[ 0.272428] PCI: Using ACPI for IRQ routing
[ 0.280680] PCI: pci_cache_line_size set to 64 bytes
[ 0.280723] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.280724] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
[ 0.280806] NetLabel: Initializing
[ 0.280807] NetLabel: domain hash size = 128
[ 0.280807] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.280818] NetLabel: unlabeled traffic allowed by default
[ 0.280953] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.280956] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.283011] clocksource: Switched to clocksource hpet
[ 0.290892] VFS: Disk quotas dquot_6.6.0
[ 0.290919] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.291048] AppArmor: AppArmor Filesystem Enabled
[ 0.291094] pnp: PnP ACPI init
[ 0.291237] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291295] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.291446] pnp 00:02: [dma 0 disabled]
[ 0.291483] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.291651] pnp 00:03: [dma 0 disabled]
[ 0.291716] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.291791] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.291793] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.291794] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291928] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.291929] system 00:05: [io 0x040b] has been reserved
[ 0.291930] system 00:05: [io 0x04d6] has been reserved
[ 0.291931] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.291934] system 00:05: [io 0x0c14] has been reserved
[ 0.291935] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.291936] system 00:05: [io 0x0c52] has been reserved
[ 0.291937] system 00:05: [io 0x0c6c] has been reserved
[ 0.291938] system 00:05: [io 0x0c6f] has been reserved
[ 0.291939] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.291940] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.291941] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.291942] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.291943] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.291944] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.291945] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.291946] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.291947] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.291948] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.291949] system 00:05: [io 0xfe00-0xfefe] has been reserved
[ 0.291950] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.291951] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.291953] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291989] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.292079] system 00:07: [io 0x0e80-0x0f5f] has been reserved
[ 0.292080] system 00:07: [io 0x0ae0-0x0aef] has been reserved
[ 0.292082] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292131] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.292133] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292354] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.292355] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.292356] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.292357] system 00:09: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.292358] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.292360] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.292439] pnp: PnP ACPI: found 10 devices
[ 0.299044] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.299063] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.299064] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.299067] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
[ 0.299069] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.299071] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.299072] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.299074] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.299077] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.299088] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.299089] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.299090] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.299091] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.299092] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.299093] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.299094] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.299095] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfebfffff]
[ 0.299096] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.299097] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.299098] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.299099] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.299100] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.299101] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.299102] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.299103] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.299104] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.299160] NET: Registered protocol family 2
[ 0.299394] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.299493] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.299664] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.299723] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.299754] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.299860] NET: Registered protocol family 1
[ 0.299868] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.763158] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.763162] PCI: CLS 64 bytes, default 64
[ 0.763203] Unpacking initramfs...
[ 1.287630] Freeing initrd memory: 40972K
[ 1.287845] PCI-DMA: Disabling AGP.
[ 1.287958] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.287958] PCI-DMA: using GART IOMMU.
[ 1.287960] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.291450] LVT offset 1 assigned for vector 0x400
[ 1.291459] IBS: LVT offset 1 assigned
[ 1.291588] perf: AMD IBS detected (0x0000001f)
[ 1.291641] Scanning for low memory corruption every 60 seconds
[ 1.292097] audit: initializing netlink subsys (disabled)
[ 1.292198] audit: type=2000 audit(1515333920.180:1): initialized
[ 1.292435] Initialise system trusted keyrings
[ 1.292536] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.293766] zbud: loaded
[ 1.294231] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.294471] fuse init (API version 7.26)
[ 1.296663] Key type asymmetric registered
[ 1.296665] Asymmetric key parser 'x509' registered
[ 1.296714] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.296766] io scheduler noop registered
[ 1.296767] io scheduler deadline registered
[ 1.296774] io scheduler cfq registered (default)
[ 1.297108] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 1.297109] vesafb: scrolling: redraw
[ 1.297110] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.297120] vesafb: framebuffer at 0xd0000000, mapped to 0xffffac6dc1800000, using 5824k, total 5824k
[ 1.297220] Console: switching to colour frame buffer device 175x65
[ 1.297239] fb0: VESA VGA frame buffer device
[ 1.297313] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.297316] ACPI: Power Button [PWRB]
[ 1.297344] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.297346] ACPI: Power Button [PWRF]
[ 1.297373] ACPI: ACPI: processor limited to max C-state 1
[ 1.297580] GHES: HEST is not enabled!
[ 1.297686] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.318219] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.319730] Linux agpgart interface v0.103
[ 1.321870] loop: module loaded
[ 1.322015] libphy: Fixed MDIO Bus: probed
[ 1.322016] tun: Universal TUN/TAP device driver, 1.6
[ 1.322016] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.322060] PPP generic driver version 2.4.2
[ 1.322099] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.322100] ehci-pci: EHCI PCI platform driver
[ 1.322215] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.322219] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.322222] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.322231] ehci-pci 0000:00:12.2: debug port 1
[ 1.322269] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 1.335073] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.335107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.335109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.335109] usb usb1: Product: EHCI Host Controller
[ 1.335110] usb usb1: Manufacturer: Linux 4.10.0-42-generic ehci_hcd
[ 1.335111] usb usb1: SerialNumber: 0000:00:12.2
[ 1.335219] hub 1-0:1.0: USB hub found
[ 1.335223] hub 1-0:1.0: 6 ports detected
[ 1.335437] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.335440] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.335442] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.335451] ehci-pci 0000:00:13.2: debug port 1
[ 1.335481] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
[ 1.351071] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.351123] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.351124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.351125] usb usb2: Product: EHCI Host Controller
[ 1.351125] usb usb2: Manufacturer: Linux 4.10.0-42-generic ehci_hcd
[ 1.351126] usb usb2: SerialNumber: 0000:00:13.2
[ 1.351222] hub 2-0:1.0: USB hub found
[ 1.351226] hub 2-0:1.0: 6 ports detected
[ 1.351339] ehci-platform: EHCI generic platform driver
[ 1.351346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.351348] ohci-pci: OHCI PCI platform driver
[ 1.351451] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.351454] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.351472] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 1.415099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.415100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.415101] usb usb3: Product: OHCI PCI host controller
[ 1.415102] usb usb3: Manufacturer: Linux 4.10.0-42-generic ohci_hcd
[ 1.415103] usb usb3: SerialNumber: 0000:00:12.0
[ 1.415211] hub 3-0:1.0: USB hub found
[ 1.415217] hub 3-0:1.0: 3 ports detected
[ 1.415371] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.415374] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.415391] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 1.479098] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.479099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.479100] usb usb4: Product: OHCI PCI host controller
[ 1.479101] usb usb4: Manufacturer: Linux 4.10.0-42-generic ohci_hcd
[ 1.479102] usb usb4: SerialNumber: 0000:00:12.1
[ 1.479208] hub 4-0:1.0: USB hub found
[ 1.479214] hub 4-0:1.0: 3 ports detected
[ 1.479376] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.479379] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.479397] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 1.543097] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.543098] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.543099] usb usb5: Product: OHCI PCI host controller
[ 1.543100] usb usb5: Manufacturer: Linux 4.10.0-42-generic ohci_hcd
[ 1.543100] usb usb5: SerialNumber: 0000:00:13.0
[ 1.543207] hub 5-0:1.0: USB hub found
[ 1.543212] hub 5-0:1.0: 3 ports detected
[ 1.543365] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.543368] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.543384] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 1.607099] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.607101] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.607101] usb usb6: Product: OHCI PCI host controller
[ 1.607102] usb usb6: Manufacturer: Linux 4.10.0-42-generic ohci_hcd
[ 1.607103] usb usb6: SerialNumber: 0000:00:13.1
[ 1.607215] hub 6-0:1.0: USB hub found
[ 1.607221] hub 6-0:1.0: 3 ports detected
[ 1.607390] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.607394] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.607410] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fa000
[ 1.671098] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.671099] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.671100] usb usb7: Product: OHCI PCI host controller
[ 1.671101] usb usb7: Manufacturer: Linux 4.10.0-42-generic ohci_hcd
[ 1.671102] usb usb7: SerialNumber: 0000:00:14.5
[ 1.671208] hub 7-0:1.0: USB hub found
[ 1.671214] hub 7-0:1.0: 2 ports detected
[ 1.671278] ohci-platform: OHCI generic platform driver
[ 1.671285] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.671337] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.671337] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.671470] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.671568] mousedev: PS/2 mouse device common for all mice
[ 1.671695] rtc_cmos 00:01: RTC can wake from S4
[ 1.671797] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.671818] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.671822] i2c /dev entries driver
[ 1.671859] device-mapper: uevent: version 1.0.3
[ 1.671916] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.671995] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.672314] NET: Registered protocol family 10
[ 1.675798] Segment Routing with IPv6
[ 1.675812] NET: Registered protocol family 17
[ 1.675819] Key type dns_resolver registered
[ 1.676101] microcode: CPU0: patch_level=0x010000c8
[ 1.676108] microcode: CPU1: patch_level=0x010000c8
[ 1.676114] microcode: CPU2: patch_level=0x010000c8
[ 1.676120] microcode: CPU3: patch_level=0x010000c8
[ 1.676151] microcode: Microcode Update Driver: v2.2.
[ 1.676263] registered taskstats version 1
[ 1.676271] Loading compiled-in X.509 certificates
[ 1.678487] Loaded X.509 cert 'Build time autogenerated kernel key: 08f7e76e35960ddc5f58d339c2ab190bcc4bf201'
[ 1.678505] zswap: loaded using pool lzo/zbud
[ 1.691470] Key type big_key registered
[ 1.691473] Key type trusted registered
[ 1.692782] Key type encrypted registered
[ 1.692785] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.692787] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.692804] evm: HMAC attrs: 0x1
[ 1.692971] Magic number: 2:491:80
[ 1.693072] rtc_cmos 00:01: setting system clock to 2018-01-07 14:05:21 UTC (1515333921)
[ 1.693172] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.693294] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.693294] EDD information not available.
[ 1.693318] PM: Hibernation image not present or could not be loaded.
[ 1.695479] Freeing unused kernel memory: 2228K
[ 1.695480] Write protecting the kernel read-only data: 14336k
[ 1.696084] Freeing unused kernel memory: 1156K
[ 1.696694] Freeing unused kernel memory: 268K
[ 1.703561] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.712688] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.712765] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.712775] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.713311] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.713330] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.718444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.718511] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.718520] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.718540] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.718544] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.718552] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.747711] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.752140] wmi: Mapper loaded
[ 1.752394] r8168: loading out-of-tree module taints kernel.
[ 1.752717] r8168: module verification failed: signature and/or required key missing - tainting kernel
[ 1.752996] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[ 1.755242] ahci 0000:00:11.0: version 3.0
[ 1.755480] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.755481] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.760897] scsi host0: ahci
[ 1.762892] [drm] Initialized
[ 1.767044] scsi host1: ahci
[ 1.772131] scsi host2: ahci
[ 1.772231] scsi host3: ahci
[ 1.772276] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
[ 1.772278] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
[ 1.772280] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
[ 1.772282] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
[ 1.774851] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 1.774866] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 1.779268] scsi host4: pata_atiixp
[ 1.787055] scsi host5: pata_atiixp
[ 1.787098] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.787098] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.791001] [drm] radeon kernel modesetting enabled.
[ 1.792969] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.792971] AMD IOMMUv2 functionality not available on this system
[ 1.795799] CRAT table not found
[ 1.795800] Finished initializing topology ret=0
[ 1.795831] kfd kfd: Initialized module
[ 1.796018] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[ 1.796019] fb: switching to radeondrmfb from VESA VGA
[ 1.796049] Console: switching to colour dummy device 80x25
[ 1.796433] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1462:0x7641 0x00).
[ 1.796445] [drm] register mmio base: 0xFEBE0000
[ 1.796445] [drm] register mmio size: 65536
[ 1.797051] ATOM BIOS: B43106
[ 1.797069] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.797070] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.797075] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.797075] [drm] RAM width 32bits DDR
[ 1.798037] r8168 0000:02:00.0 enp2s0: renamed from eth0
[ 1.798703] [TTM] Zone kernel: Available graphics memory: 1891780 kiB
[ 1.798704] [TTM] Initializing pool allocator
[ 1.798708] [TTM] Initializing DMA pool allocator
[ 1.798726] [drm] radeon: 256M of VRAM memory ready
[ 1.798726] [drm] radeon: 512M of GTT memory ready.
[ 1.798731] [drm] Loading RS780 Microcode
[ 1.798774] [drm] radeon: power management initialized
[ 1.798776] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.803412] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.803570] radeon 0000:01:05.0: WB enabled
[ 1.803572] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff9d9891548c00
[ 1.803573] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.803574] [drm] Driver supports precise vblank timestamp query.
[ 1.803575] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 1.803587] [drm] radeon: irq initialized.
[ 1.835362] [drm] ring test on 0 succeeded in 1 usecs
[ 1.835443] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.835866] [drm] Radeon Display Connectors
[ 1.835867] [drm] Connector 0:
[ 1.835867] [drm] VGA-1
[ 1.835869] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 1.835869] [drm] Encoders:
[ 1.835869] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.835870] [drm] Connector 1:
[ 1.835870] [drm] HDMI-A-1
[ 1.835870] [drm] HPD3
[ 1.835871] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 1.835871] [drm] Encoders:
[ 1.835872] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 1.881511] [drm] fb mappable at 0xD0141000
[ 1.881512] [drm] vram apper at 0xD0000000
[ 1.881512] [drm] size 7299072
[ 1.881513] [drm] fb depth is 24
[ 1.881513] [drm] pitch is 6912
[ 1.881582] fbcon: radeondrmfb (fb0) is primary device
[ 1.881658] Console: switching to colour frame buffer device 210x65
[ 1.881681] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 1.895131] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:05.0 on minor 0
[ 1.959647] ata6.00: ATA-9: SPCC Solid State Disk, SAFM22.3, max UDMA/133
[ 1.959649] ata6.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.959935] ata6.01: ATA-8: ST31000524NS, AV22, max UDMA/133
[ 1.959936] ata6.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.960201] ata6.01: failed to enable Sense Data Reporting, Emask 0x1
[ 1.960844] ata6.00: configured for UDMA/100
[ 1.963058] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 1.966162] ata6.01: failed to enable Sense Data Reporting, Emask 0x1
[ 1.966165] ata6.01: configured for UDMA/100
[ 2.085942] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.085982] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.090075] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.156110] usb 6-2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.156112] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.156113] usb 6-2: Product: USB Receiver
[ 2.156114] usb 6-2: Manufacturer: Logitech
[ 2.163151] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.176145] usbcore: registered new interface driver usbhid
[ 2.176145] usbhid: USB HID core driver
[ 2.181217] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-2/input2
[ 2.251083] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.253216] ata4.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
[ 2.254056] ata4.00: configured for UDMA/100
[ 2.258575] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5
[ 2.282774] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.282775] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.282904] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.282972] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 2.283221] scsi 5:0:0:0: Direct-Access ATA SPCC Solid State 22.3 PQ: 0 ANSI: 5
[ 2.291052] random: fast init done
[ 2.307147] logitech-hidpp-device 0003:046D:402D.0004: hidraw1: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:13.1-2:1
[ 2.315204] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 2.315314] sd 5:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.315338] sd 5:0:0:0: [sda] Write Protect is off
[ 2.315340] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.315385] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.315398] scsi 5:0:1:0: Direct-Access ATA ST31000524NS AV22 PQ: 0 ANSI: 5
[ 2.319063] tsc: Refined TSC clocksource calibration: 3400.015 MHz
[ 2.319072] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31025cd3783, max_idle_ns: 440795372123 ns
[ 2.319937] sda: sda1 sda2
[ 2.320379] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.347197] sd 5:0:1:0: Attached scsi generic sg2 type 0
[ 2.347287] sd 5:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.347306] sd 5:0:1:0: [sdb] Write Protect is off
[ 2.347307] sd 5:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.347354] sd 5:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.370970] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.371494] sd 5:0:1:0: [sdb] Attached SCSI disk
[ 2.811053] usb 6-3: new full-speed USB device number 3 using ohci-pci
[ 2.996098] usb 6-3: New USB device found, idVendor=04f9, idProduct=01e4
[ 2.996100] usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 2.996101] usb 6-3: SerialNumber: BROF8F675136
[ 3.000844] usb-storage 6-3:1.2: USB Mass Storage device detected
[ 3.000998] scsi host6: usb-storage 6-3:1.2
[ 3.001065] usbcore: registered new interface driver usb-storage
[ 3.002303] usbcore: registered new interface driver uas
[ 3.343152] clocksource: Switched to clocksource tsc
[ 4.033105] scsi 6:0:0:0: Direct-Access Brother DCP-357C 1.00 PQ: 0 ANSI: 2
[ 4.033414] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 4.153097] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 8.671943] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.785004] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 8.785120] systemd[1]: Detected architecture x86-64.
[ 8.785349] systemd[1]: Set hostname to <aqr-bureau>.
[ 8.875532] systemd[1]: Listening on udev Kernel Socket.
[ 8.875597] systemd[1]: Listening on Syslog Socket.
[ 8.875607] systemd[1]: Reached target Encrypted Volumes.
[ 8.875686] systemd[1]: Created slice System Slice.
[ 8.875717] systemd[1]: Listening on udev Control Socket.
[ 8.875777] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.875796] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.921315] lp: driver loaded but no devices found
[ 8.926008] ppdev: user-space parallel port driver
[ 8.928501] parport_pc 00:03: reported by Plug and Play ACPI
[ 8.928586] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.944946] RPC: Registered named UNIX socket transport module.
[ 8.944947] RPC: Registered udp transport module.
[ 8.944948] RPC: Registered tcp transport module.
[ 8.944948] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.027198] lp0: using parport0 (interrupt-driven).
[ 9.095988] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 9.102974] systemd-journald[267]: Received request to flush runtime journal from PID 1
[ 9.189435] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.205350] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160930/utaddress-247)
[ 9.205355] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.267445] kvm: Nested Virtualization enabled
[ 9.267453] kvm: Nested Paging enabled
[ 9.269965] EDAC MC: Ver: 3.0.0
[ 9.271905] MCE: In-kernel MCE decoding enabled.
[ 9.273201] EDAC amd64: DRAM ECC disabled.
[ 9.273202] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 9.322059] usblp 6-3:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4
[ 9.322082] usbcore: registered new interface driver usblp
[ 9.342750] snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 9.342752] snd_hda_codec_realtek hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.342753] snd_hda_codec_realtek hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.342754] snd_hda_codec_realtek hdaudioC0D3: mono: mono_out=0x0
[ 9.342755] snd_hda_codec_realtek hdaudioC0D3: inputs:
[ 9.342757] snd_hda_codec_realtek hdaudioC0D3: Front Mic=0x19
[ 9.342758] snd_hda_codec_realtek hdaudioC0D3: Rear Mic=0x18
[ 9.342758] snd_hda_codec_realtek hdaudioC0D3: Line=0x1a
[ 9.357488] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 9.357547] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 9.357592] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 9.357658] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 9.357877] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 9.718987] Adding 4096568k swap on /dev/sdb3. Priority:-1 extents:1 across:4096568k FS
[ 9.757590] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.850946] random: crng init done
[ 9.969867] audit: type=1400 audit(1515333929.770:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=741 comm="apparmor_parser"
[ 9.969871] audit: type=1400 audit(1515333929.770:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=741 comm="apparmor_parser"
[ 9.969872] audit: type=1400 audit(1515333929.770:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=741 comm="apparmor_parser"
[ 9.969873] audit: type=1400 audit(1515333929.770:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=741 comm="apparmor_parser"
[ 9.969873] audit: type=1400 audit(1515333929.770:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=741 comm="apparmor_parser"
[ 9.972192] audit: type=1400 audit(1515333929.774:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=742 comm="apparmor_parser"
[ 9.973729] audit: type=1400 audit(1515333929.774:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=740 comm="apparmor_parser"
[ 9.973731] audit: type=1400 audit(1515333929.774:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=740 comm="apparmor_parser"
[ 9.973732] audit: type=1400 audit(1515333929.774:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=740 comm="apparmor_parser"
[ 9.974443] audit: type=1400 audit(1515333929.774:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=743 comm="apparmor_parser"
[ 10.363267] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 10.363837] enp2s0: 0xffffac6dc064d000, d4:3d:7e:9c:c3:b0, IRQ 25
[ 10.436431] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 13.501448] r8168: enp2s0: link up
[ 13.501485] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 15.174064] kauditd_printk_skb: 14 callbacks suppressed
[ 15.174067] audit: type=1400 audit(1515333934.974:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1021 comm="usb" capability=35 capname="wake_alarm"
[ 15.174214] usblp1: removed
[ 15.185949] usblp 6-3:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4
[ 40.618082] FS-Cache: Loaded
[ 40.665826] FS-Cache: Netfs 'cifs' registered for caching
[ 40.665944] Key type cifs.spnego registered
[ 40.665946] Key type cifs.idmap registered
[ 42.908480] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 42.912459] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 42.916459] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 42.918458] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.718313] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.720318] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.726311] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.742332] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.750363] logitech-hidpp-device 0003:046D:402D.0004: HID++ 2.0 device connected.
[ 52.756314] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.772320] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.788319] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.802318] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 52.810419] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/0003:046D:402D.0004/input/input8
aqr@aqr-bureau:~$ On peut encore gagner 25 s ici :
[ 15.185949] usblp 6-3:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4
[ 40.618082] FS-Cache: LoadedIl est où le problème ?
Et une dizaine de secondes avec la souris logitech.
Le problème principal venait bien de la valeur UUID correspondant au swap !! Merci pour la solution.
Je n'aurais pas trouvé la solution seul. Quelle doc potasser pour me permettre de mieux comprendre à l'avenir ?
Encore merci pour l'aide apportée.
Gérard ALQUIER
-------------------------------------------------------------------------
La théorie c'est quand on sait tout et que rien ne fonctionne. La pratique c'est quand tout fonctionne et que personne ne sait pourquoi. Moi j'ai réuni théorie et pratique : Rien ne fonctionne... et personne ne sait pourquoi !
Hors ligne
#7 Le 07/01/2018, à 16:34
- malbo
Re : [Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage trés longue.
Gégé13821 a écrit :
Le problème principal venait bien de la valeur UUID correspondant au swap !!
Oui, dans le post #4 je m'étais jeté comme un bête sur tes lignes personnalisées alors que j'aurais dû prendre le temps de contrôler toutes les UUID. Le coup de la modif de l'UUID de la swap par l’installateur de Debian est un classique(*). C'est pas beau de se faire des crasses entre installations Linux...
Je te prie de fermer la discussion en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :
[Résolu] UBUNTU 16.04 LTS Connexion internet au démarrage très longue(*) j'ai analysé la chose dans ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p21817306
Dernière modification par malbo (Le 07/01/2018, à 16:39)
Hors ligne