Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#51 Le 10/01/2018, à 11:08

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Mince sur le site officiel il me demande de l'acheter avant de pouvoir le télécharger. T'as un bon lien ?
Et puis c'est toujours le même soucis, je suis sur Ubuntu là, et j'arrive pas à trouver de logiciel pour clé la clé usb bootable pour Windows..
Dur dur de pas perdre patience devant ce casse-tête en tout cas.

Yaurait pas moyen d'envisager une autre possibilité .. ^^
Genre dans le post que tu me donnais plus tôt, il installe ubuntu sans grub au début (et vu que c'est ça qui buguait..)

Hors ligne

#52 Le 10/01/2018, à 11:45

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

https://www.microsoft.com/en-us/softwar … ndows10ISO

Je sais pas si c'est la version familiale mais j'ai pris celle-ci en 64bits.

Mince, je sais pas.
Je suis sur Gparted en liveusb là. Faut que j'enlève la partition EFI System Partition, si je veux faire une clean install de Windows 10 ?
Pareil, quand est-il du linux-swap ?

Dernière modification par quentind (Le 10/01/2018, à 11:50)

Hors ligne

#53 Le 10/01/2018, à 11:57

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

La partition EFi peut être enlevée car windows sait la créer.   le linux swap doit être enlevé

Mais l'installation de windows devrait proposer un choix d'installer sur la totalité du disque et s'occuper de ce ménage.

je suis surpris qu'il te demande un N° de licence à partir du lien que tu viens d'indiquer (peut-être pour la version entreprise?) mas pas pour la version familliale


Ils ont manifestement revu le site de téléchargement depuis 15 jours ( dans le bon sens?)

A) windows 10
B) French
C) 64 bits

On ne voit plus les 4 déclinaisons ( c'est peut-être maintenant dans le même package avec sélection à l'installation?.....

Il n'y a pas de raison que tu ne puisses pas télécharger.

Dernière modification par ?? (Le 10/01/2018, à 14:55)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#54 Le 10/01/2018, à 12:08

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Oui non avec le lien que j'ai donné, j'ai pu téléchargé l'iso. Désolé j'ai pas corrigé mon post précédent.

Je suis en cours de télécharger l'iso une 3eme fois.
Je vérifierais tout ça avec ce que tu m'as indiqué.
Et reste à trouver à faire une clé windows bootable depuis mon linux.

Entre temps j'ai tenté l'install de mon actuel clé Windows sur tout le disque dur, mais j'ai eu le droit à la même erreur..

Hors ligne

#55 Le 10/01/2018, à 12:30

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Pour faire une clé bootable
Tu formates la clé en FAT32
Tu ouvres l'ISO avec le logiciel  "Monteur d'image ISO" . Je pense qu'il est aussi présent dans la live-USB
Puis copier/coller des  3 ou 4 fichiers et 3 ou 4 répertoires présents dans la partition FAT32
Tu termines en éjectant très proprement la clé USB afin d'être certain que toutes les écritures ont été parfaitement faites.


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#56 Le 10/01/2018, à 14:06

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Youhou ! L'installation de Windows 10 s'est bien passée !!
ET c'était une expérience intéressante de voir une install Windows ^^ (avec toutes les demandes d'accès, d'autorisations, de publicité..)

Bref, je vais pouvoir continuer la procédure que tu m'avais donné, en téléchargeant les fichiers et voir si ça met à jour le bios !

PS : pour info, j'avais fait ma clé avec unetbootin, en la formatant bien en fat32, en vérifiant bien l'iso de windows, et en supprimant toutes mes anciennes partition et en laissant Windows gérer son bousin.

Dernière modification par quentind (Le 10/01/2018, à 14:07)

Hors ligne

#57 Le 10/01/2018, à 14:47

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Yes, bon signe !! Les commandes

sudo efibootmgr    -c   -d    /dev/sdb      -p   1    -L    "Refind"    -l  "\EFI\refind\refind_x64.efi"
sudo efibootmgr    -v

sont bien passées !

Résultat :

sudo efibootmgr -c -d /dev/sdb -p 1 -L "Refind" -l "\EFI\refind\refind_x64.efi"
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0002,0001,0000,2001,2002,2003
Boot0000* Linux
Boot0001* Windows Boot Manager
Boot0003* Unknown Device: 
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Boot0002* Refind
ubuntu@ubuntu:~$ sudo efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0002,0001,0000,2001,2002,2003
Boot0000* Linux	HD(1,MBR,0x4294967283,0x800,0x775000)/File(\EFI\Boot\grubx64.efi)RC
Boot0001* Windows Boot Manager	HD(2,GPT,416e6f1c-2f4e-4886-9fa0-d951df848036,0xfa000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* Refind	HD(1,GPT,370798ac-5dd7-4283-b9e4-9774cffe1c51,0x800,0xf9800)/File(\EFI\refind\refind_x64.efi)
Boot0003* Unknown Device: 	HD(1,GPT,c01afbc7-33e8-4352-a61e-a45d9660e8eb,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

Euh mais du coup faut que je réinstalle Ubuntu vu que j'ai tout enlevé, on est d'accord ??

Dernière modification par quentind (Le 10/01/2018, à 14:51)

Hors ligne

#58 Le 10/01/2018, à 15:02

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Bon, Windows installé, le bios mis à jour et la commande EFIBOOTMGR fonctionnant
Comme tu le dit, Il ne te reste plus qu'à installer ubuntu.. Libre à toi de supprimer windows ou de le rétrécir car il me semble que tu as pas mal de place dans ton disque dur.
Tu peux faire cela avec GPARTED puisque c'est un  windows10 EFI.

Notes que comme REFIND est déjà installé, tu peux aussi l'utiliser pour détecter le boot  en sélectionnant  la clé USB
Cela te permettra de redécouvrir son fonctionnement.

Dernière modification par ?? (Le 10/01/2018, à 15:06)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#59 Le 10/01/2018, à 15:06

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Laisser Windows ne va-t-il pas poser de soucis inutilement ?
Et si je lui laisse une place, il faudra choisir au démarrage entre les deux ?

Oui pour refind, je vais voir ça smile

Dernière modification par quentind (Le 10/01/2018, à 15:07)

Hors ligne

#60 Le 10/01/2018, à 15:10

regine ducloy

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Après mise à jour de logiciels ce midi sur Ubuntu 16-4, au redémarrage pour continuer, blocage sur écran coloré vierge avant demande du mot de passe ; echap impossible. Suis retourné sur version antérieure pour ce SOS.
Même problème aux essais suivants.
PS Je ne suis pas informaticien mais je j'arrive en général à suivre les instructions.
Merci d'avance

Hors ligne

#61 Le 10/01/2018, à 15:21

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Bonjour regine ducloy
Ton problème n'a strictement rien à voir avec celui en cours, je te prie d'ouvrir une nouvelle discussion comme tu as su le faire il y a 4 ans.


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#62 Le 10/01/2018, à 15:51

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Donc je me suis mis sur la liveusb, j'ai lancé l'install et..
elle s'est bien passé !!

Malheureusement cela semble jamais simple, et en rédémarrant et en enlevant la clé usb..

"No Bootable Device" avec un beau logo de disque dur et d'une loupe.

J'ai changé l'ordre du boot dans le bios en mettant le disque dur, mais ça n'a rien changé.

Je pense pas que refind se lance d'ailleurs ??

Hors ligne

#63 Le 10/01/2018, à 15:54

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Ah, tu me disais

"Sinon  tu utiliseras  boot-repair pour finir l'installation du grub."

Ce que je n'ai pas fait. Je m'y attèle

Hors ligne

#64 Le 10/01/2018, à 15:57

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Penses à un boot-info... et surtout à notre sauveur car ton contexte est maintenant probablement totalement classique.

Inutile de faire une réparation, Tu as dit que ton installation n'avait pas eu de problème.
Dans l'ensemble, on ne lance qu'une réparation après avoir consulté le boot-info pour avoir une idée de la pertinence de la réparation proposée.

Dernière modification par ?? (Le 10/01/2018, à 16:06)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#65 Le 10/01/2018, à 16:03

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Yes je venais de retrouver ce lien !
Je te donne le boot-info et tu peux me dire si tout va bien et que je peux continuer la procédure !

Et je fais un boot-repair en premier ou la manip du "sauveur" en premier ?

Hors ligne

#66 Le 10/01/2018, à 16:05

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Mon boot-info actuel :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sda.
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03 20151222............................................@.....2....0............A20 gate n
    Boot sector info:  Syslinux looks at sector 3034316 of /dev/sda1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/ubuntu/fwupx64.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi 
                       /EFI/ubuntu/shimx64.efi

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048     7,821,311     7,819,264   c W95 FAT32 (LBA)


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sdb2             1,050,624 1,945,495,551 1,944,444,928 Data partition (Linux)
/dev/sdb3         1,945,495,552 1,953,523,711     8,028,160 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        9AC7-318F                              vfat       
/dev/sdb1        0FA3-429A                              vfat       
/dev/sdb2        4d5f68d2-8f0e-4344-895b-f6238f4951f1   ext4       
/dev/sdb3        fd12e80c-58ec-469c-9732-cf7cf0febd80   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 10 14:54 ata-Slimtype_DVD_A_DA8AESH_0080F0116471816FF101 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part3 -> ../../sdb3
lrwxrwxrwx 1 root root  9 Jan 10 15:02 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 15:02 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Jan 10 15:03 wwn-0x5000039722a86368 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 15:03 wwn-0x5000039722a86368-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 15:03 wwn-0x5000039722a86368-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 15:03 wwn-0x5000039722a86368-part3 -> ../../sdb3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sda1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sda1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper  quiet splash ---

label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity  quiet splash ---

label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash ---

label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit 

label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit 

label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---

label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---

label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---

label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---

--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sda1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             ldlinux.c32                                    1
            ?? = ??             libcom32.c32                                   1
            ?? = ??             libutil.c32                                    1
            ?? = ??             menu.c32                                       1

============== sda1: Version of COM32(R) files used by Syslinux: ===============

 ldlinux.c32                        :  not a COM32/COM32R module
 libcom32.c32                       :  not a COM32/COM32R module
 libutil.c32                        :  not a COM32/COM32R module
 menu.c32                           :  not a COM32/COM32R module

========================== sdb1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 4d5f68d2-8f0e-4344-895b-f6238f4951f1 root hd1,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sdb2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
	else
	  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
	fi
	linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-109-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
	menuentry 'Ubuntu, avec Linux 4.4.0-109-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-109-generic…'
		linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-109-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-109-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-109-generic…'
		linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-109-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-109-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-109-generic…'
		linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-109-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
	        linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
	        linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
	        linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb2 during installation
UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdb1 during installation
UUID=0FA3-429A  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sdb3 during installation
UUID=fd12e80c-58ec-469c-9732-cf7cf0febd80 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 162.836875916 = 174.844764160  boot/grub/grub.cfg                             1
   2.280269623 = 2.448420864    boot/vmlinuz-4.4.0-109-generic                 1
   2.409934998 = 2.587648000    boot/vmlinuz-4.4.0-109-generic.efi.signed      1
   1.597381592 = 1.715175424    boot/vmlinuz-4.4.0-31-generic                  1
   1.597381592 = 1.715175424    vmlinuz                                        1
   2.946910858 = 3.164221440    boot/initrd.img-4.4.0-109-generic              4
   2.699634552 = 2.898710528    boot/initrd.img-4.4.0-31-generic               1
   2.699634552 = 2.898710528    initrd.img                                     1
   2.699634552 = 2.898710528    initrd.img.old                                 1

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/12847/mounts) leaked on lvs invocation. Parent PID 20517: bash
File descriptor 63 (pipe:[57841]) leaked on lvs invocation. Parent PID 20517: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20180110_1502 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash acpi=off nomodeset ---
ls: cannot access '/home/usr/.config': No such file or directory

=================== os-prober:
/dev/sdb2:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="9AC7-318F" TYPE="vfat" PARTUUID="0005f9f3-01"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="0FA3-429A" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="80eaea41-25c2-45d4-8d12-c3a8f2313a11"
/dev/sdb2: UUID="4d5f68d2-8f0e-4344-895b-f6238f4951f1" TYPE="ext4" PARTUUID="a7659263-32f4-4350-bb3c-aa9c5667404b"
/dev/sdb3: UUID="fd12e80c-58ec-469c-9732-cf7cf0febd80" TYPE="swap" PARTUUID="429ca37f-1653-4cf8-9279-68aa7d1ad308"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== sdb2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Jan 10 14:33 grub.d
total 80
-rwxr-xr-x 1 root root  9791 Jun 17  2016 00_header
-rwxr-xr-x 1 root root  6258 Mar 15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Dec 12 22:48 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 Jun 17  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jun 17  2016 40_custom
-rwxr-xr-x 1 root root   216 Jun 17  2016 41_custom
-rw-r--r-- 1 root root   483 Jun 17  2016 README




=================== sdb2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sdb2: UUID=0FA3-429A   (sdb1)

=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0000* Unknown Device: 	HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0001* Linux	HD(1,MBR,0x4294967283,0x800,0x775000)/File(EFIBootgrubx64.efi)RC
Boot0002* ubuntu	HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0003* Unknown Device: 	HD(1,GPT,c01afbc7-33e8-4352-a61e-a45d9660e8eb,0x800,0x100000)/File(EFIubuntugrubx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb1.
sdb2	: sdb,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb2.

sdb	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:4005MB:scsi:512:512:msdos:SanDisk Cruzer:;
1:1049kB:4005MB:4003MB:fat32::boot, lba;

BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:996GB:996GB:ext4::;
3:996GB:1000GB:4110MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
sda   disk            3.7G
sda1  part vfat       3.7G
sdb   disk          931.5G
sdb1  part vfat       512M
sdb2  part ext4     927.2G
sdb3  part swap       3.8G
sr0   rom            1024M
loop0 loop squashfs   1.4G

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  1 running
sda1     1  0  1         /cdrom
sdb      1  0  0 running
sdb1     1  0  0         /mnt/boot-sav/sdb1
sdb2     1  0  0         /mnt/boot-sav/sdb2
sdb3     1  0  0         [SWAP]
sr0      1  0  1 running
loop0    1  1  0         /rofs


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1918996k,nr_inodes=479749,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=386728k,mode=755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=386728k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fb0 fd full fuse hugepages hwrng initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 9a 42 a3 0f 4e  4f 20 4e 41 4d 45 20 20  |..).B..NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     378M  6.0M  372M   2% /run
/dev/sda1      vfat      3.8G  1.5G  2.3G  39% /cdrom
/dev/loop0     squashfs  1.4G  1.4G     0 100% /rofs
/cow           overlay   1.9G   85M  1.8G   5% /
tmpfs          tmpfs     1.9G  252K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     1.9G  300K  1.9G   1% /tmp
tmpfs          tmpfs     378M  100K  378M   1% /run/user/999
/dev/sdb1      vfat      511M  3.4M  508M   1% /mnt/boot-sav/sdb1
/dev/sdb2      ext4      913G  4.3G  862G   1% /mnt/boot-sav/sdb2

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0005f9f3

Device     Boot Start     End Sectors  Size Id Type
/dev/sda1  *     2048 7821311 7819264  3.7G  c W95 FAT32 (LBA)


Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: FEF83830-080F-497C-84BB-1D2A25600BD6

Device          Start        End    Sectors   Size Type
/dev/sdb1        2048    1050623    1048576   512M EFI System
/dev/sdb2     1050624 1945495551 1944444928 927.2G Linux filesystem
/dev/sdb3  1945495552 1953523711    8028160   3.8G Linux swap




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb2, using the following options:        sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sdb1/efi/.../grub*.efi file!


=================== User settings
The settings chosen by the user will not act on the boot.

Hors ligne

#67 Le 10/01/2018, à 16:08

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

le boot-info dit que le Gesbuklu   est utile

Boot0000* Unknown Device: 	HD(1,GPT,80eaea41-25c2-45d4-8d12-
Boot0003* Unknown Device: 	HD(1,GPT,c01afbc7-33e8-4352-a61e

-

SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)

je vois que tu as choisis de faire la mise à jour pendant l'installation

=================== sdb2: Location of files loaded by Grub: ====================
           GiB - GB             File                                 Fragment(s)
 162.836875916 = 174.844764160  boot/grub/grub.cfg                             1
   2.280269623 = 2.448420864    boot/vmlinuz-4.4.0-109-generic                 1
   2.409934998 = 2.587648000    boot/vmlinuz-4.4.0-109-generic.efi.signed      1
   1.597381592 = 1.715175424    boot/vmlinuz-4.4.0-31-generic                  1
   1.597381592 = 1.715175424    vmlinuz                                        1
   2.946910858 = 3.164221440    boot/initrd.img-4.4.0-109-generic              4
   2.699634552 = 2.898710528    boot/initrd.img-4.4.0-31-generic               1
   2.699634552 = 2.898710528    initrd.img                                     1
   2.699634552 = 2.898710528    initrd.img.old                                 1

=============================== StdErr Messages: ===============================

Tu penseras à régler le swap paragraphe 3.9 uniquement https://doc.ubuntu-fr.org/swap#regler_l … nt_du_swap

Dernière modification par ?? (Le 10/01/2018, à 16:34)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#68 Le 10/01/2018, à 16:23

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Mince je peux pas suivre le tuto de Gesbuklu !

J'ai défini les mots de passe supervisor et hdd mais je n'ai pas de menu "select an uefi as trusted for executing" qui apparaît !
Lui parle de InsydeH20 Setup Utility mais c'est le truc que j'ai lancé sur Windows ça, et je n'ai plus de Windows actuellement..

(et pour la mise à jour, et bien c'est bizarre car j'ai décoché le truc pendant l'install ubuntu..)

Dernière modification par quentind (Le 10/01/2018, à 16:23)

Hors ligne

#69 Le 10/01/2018, à 16:24

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

J'attends de savoir pour la suite de cela

========================== sdb1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 4d5f68d2-8f0e-4344-895b-f6238f4951f1 root hd1,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb2/boot/grub/grub.cfg: ===========================
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt2'

car je ne le sens pas bien.


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#70 Le 10/01/2018, à 16:29

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Et faut que je fasse quelquechose ?
Peut-être aurais-je dû lancer Windows à côté, ça aurait été plus simple ?

Dernière modification par quentind (Le 10/01/2018, à 16:30)

Hors ligne

#71 Le 10/01/2018, à 16:31

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

quentind a écrit :

Mince je peux pas suivre le tuto de Gesbuklu !

J'ai défini les mots de passe supervisor et hdd mais je n'ai pas de menu "select an uefi as trusted for executing" qui apparaît !
Lui parle de InsydeH20 Setup Utility mais c'est le truc que j'ai lancé sur Windows ça, et je n'ai plus de Windows actuellement..

)

C'est le bios, Il est le même que tu utilises windows ou ubuntu

Voici un exemple de  grille
http://www.zupimages.net/viewer.php?id=18/02/4zty.jpg

Si tu ne trouves pas, cela sera la séance photo à poster

Il faut probablement que tu valides le secure mode pour que cela apparaisse.
Je serais quand même surpris que cette procédure soit seulement accessible que par windows et pas directement par le bios.
Il est vrai que ce bios n'a pas su se mettre à jour de lui-même

Dernière modification par ?? (Le 10/01/2018, à 16:41)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#72 Le 10/01/2018, à 16:40

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Ouah j'ai exactement la même chose, sauf que je n'ai pas la ligne Select an uefi as trusted for executing..

J'ai activé le secure mode et redemarré, et pas de changement.
J'ai les 3 premiers mots de passe activés.
(pas d'appareil photo/smartphone à portée là pour les photos.. mais j'ai la même chose)

(Juste pour rappel, je n'ai pas essayé de boot-repair)

Dernière modification par quentind (Le 10/01/2018, à 16:52)

Hors ligne

#73 Le 10/01/2018, à 17:02

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Je suis en train de chercher un petit peu sur internet...... car pas d'idée...
C'est dommages que windows ne soit plus la car on aurait pu voir s'il pouvait le lancer.......

http://global-download.packardbell.com/ … 1515600696

Dernière modification par ?? (Le 10/01/2018, à 17:14)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#74 Le 10/01/2018, à 17:34

??

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

Il n'y a vraiment rien dans internet
Peux-tu refaire un boot-info 
Cela pour bien vérifier que le mode secure est mis.
Boot-repair ne peut rien dans ce contexte

Pour un peu, je te referais bien faire la manip  de dire que c'est windows. Au moins, il ne devrait plus figer l'ordinateur

Boot0000* Linux	HD(1,MBR,0x4294967283,0x800,0x775000)/File(\EFI\Boot\grubx64.efi)RC
Boot0001* Windows Boot Manager	HD(2,GPT,416e6f1c-2f4e-4886-9fa0-d951df848036,0xfa000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........

C'est a faire avec la clé d'installation

Je peux faire quelques erreurs de frappes

setxkbmap fr
sudo mount    /dev/sdb1 /mnt

sudo mkdir /mnt/EFI/Microsoft
sudo mkdir /mnt/EFI/Microsoft/Boot
cd /mnt/EFI/ubuntu/
sudo cp -R * /mnt/EFI/Microsoft/Boot/
sudo cp /mnt/EFI/Microsoft/Boot/grubx64.efi   /mnt/EFI/Microsoft/Boot/Bootmgfw.efi
sudo ls /mnt/EFI/Microsoft/Boot

On va fabriquer l'entrée oubliée.

sudo efibootmgr    -c   -d    /dev/sdb      -p   1    -L    "Windows Boot Manager"    -l  "\EFI\Microsoft\Boot\Bootmgfw.efi"
sudo efibootmgr    -v

et tu rebootes en mode non sécurisé afin de ne pas trop dialoguer avec ce bios

Dernière modification par ?? (Le 10/01/2018, à 17:48)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#75 Le 10/01/2018, à 17:59

quentind

Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR

S'il le faut, je pourrais toujours recommencer en réinstallant Windows..

ok voici le boot-info :

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sda.
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03 20151222............................................@.....2....0............A20 gate n
    Boot sector info:  Syslinux looks at sector 3034316 of /dev/sda1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/ubuntu/fwupx64.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi 
                       /EFI/ubuntu/shimx64.efi

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048     7,821,311     7,819,264   c W95 FAT32 (LBA)


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sdb2             1,050,624 1,945,495,551 1,944,444,928 Data partition (Linux)
/dev/sdb3         1,945,495,552 1,953,523,711     8,028,160 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        9AC7-318F                              vfat       
/dev/sdb1        0FA3-429A                              vfat       
/dev/sdb2        4d5f68d2-8f0e-4344-895b-f6238f4951f1   ext4       
/dev/sdb3        fd12e80c-58ec-469c-9732-cf7cf0febd80   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 10 16:55 ata-Slimtype_DVD_A_DA8AESH_0080F0116471816FF101 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part3 -> ../../sdb3
lrwxrwxrwx 1 root root  9 Jan 10 17:00 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 17:00 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Jan 10 17:00 wwn-0x5000039722a86368 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 17:00 wwn-0x5000039722a86368-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 17:00 wwn-0x5000039722a86368-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 17:00 wwn-0x5000039722a86368-part3 -> ../../sdb3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sda1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sda1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper  quiet splash ---

label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity  quiet splash ---

label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check  quiet splash ---

label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit 

label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit 

label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---

label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---

label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---

label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---

--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sda1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1
            ?? = ??             ldlinux.c32                                    1
            ?? = ??             libcom32.c32                                   1
            ?? = ??             libutil.c32                                    1
            ?? = ??             menu.c32                                       1

============== sda1: Version of COM32(R) files used by Syslinux: ===============

 ldlinux.c32                        :  not a COM32/COM32R module
 libcom32.c32                       :  not a COM32/COM32R module
 libutil.c32                        :  not a COM32/COM32R module
 menu.c32                           :  not a COM32/COM32R module

========================== sdb1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 4d5f68d2-8f0e-4344-895b-f6238f4951f1 root hd1,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sdb2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
	else
	  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
	fi
	linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-109-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
	menuentry 'Ubuntu, avec Linux 4.4.0-109-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-109-generic…'
		linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-109-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-109-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-109-generic…'
		linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-109-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-109-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-109-generic…'
		linux	/boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-109-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
	        linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
	        linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2  4d5f68d2-8f0e-4344-895b-f6238f4951f1
		else
		  search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
		fi
		echo	'Chargement de Linux 4.4.0-31-generic…'
	        linux	/boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-31-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb2 during installation
UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdb1 during installation
UUID=0FA3-429A  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sdb3 during installation
UUID=fd12e80c-58ec-469c-9732-cf7cf0febd80 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 162.836875916 = 174.844764160  boot/grub/grub.cfg                             1
   2.280269623 = 2.448420864    boot/vmlinuz-4.4.0-109-generic                 1
   2.409934998 = 2.587648000    boot/vmlinuz-4.4.0-109-generic.efi.signed      1
   1.597381592 = 1.715175424    boot/vmlinuz-4.4.0-31-generic                  1
   1.597381592 = 1.715175424    vmlinuz                                        1
   2.946910858 = 3.164221440    boot/initrd.img-4.4.0-109-generic              4
   2.699634552 = 2.898710528    boot/initrd.img-4.4.0-31-generic               1
   2.699634552 = 2.898710528    initrd.img                                     1
   2.699634552 = 2.898710528    initrd.img.old                                 1

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/6342/mounts) leaked on lvs invocation. Parent PID 13994: bash
File descriptor 63 (pipe:[52897]) leaked on lvs invocation. Parent PID 13994: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20180110_1700 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash acpi=off nomodeset ---
ls: cannot access '/home/usr/.config': No such file or directory

=================== os-prober:
/dev/sdb2:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="9AC7-318F" TYPE="vfat" PARTUUID="0005f9f3-01"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="0FA3-429A" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="80eaea41-25c2-45d4-8d12-c3a8f2313a11"
/dev/sdb2: UUID="4d5f68d2-8f0e-4344-895b-f6238f4951f1" TYPE="ext4" PARTUUID="a7659263-32f4-4350-bb3c-aa9c5667404b"
/dev/sdb3: UUID="fd12e80c-58ec-469c-9732-cf7cf0febd80" TYPE="swap" PARTUUID="429ca37f-1653-4cf8-9279-68aa7d1ad308"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== sdb2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Jan 10 14:33 grub.d
total 80
-rwxr-xr-x 1 root root  9791 Jun 17  2016 00_header
-rwxr-xr-x 1 root root  6258 Mar 15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Dec 12 22:48 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 Jun 17  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jun 17  2016 40_custom
-rwxr-xr-x 1 root root   216 Jun 17  2016 41_custom
-rw-r--r-- 1 root root   483 Jun 17  2016 README




=================== sdb2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sdb2: UUID=0FA3-429A   (sdb1)

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,2001,2002,2003
Boot0000* Linux	HD(1,MBR,0x4294967283,0x800,0x775000)/File(EFIBootgrubx64.efi)RC
Boot0001* Unknown Device: 	HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0002* ubuntu	HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0003* Unknown Device: 	HD(1,GPT,c01afbc7-33e8-4352-a61e-a45d9660e8eb,0x800,0x100000)/File(EFIubuntugrubx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb1.
sdb2	: sdb,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb2.

sdb	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:4005MB:scsi:512:512:msdos:SanDisk Cruzer:;
1:1049kB:4005MB:4003MB:fat32::boot, lba;

BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:996GB:996GB:ext4::;
3:996GB:1000GB:4110MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
sda   disk            3.7G
sda1  part vfat       3.7G
sdb   disk          931.5G
sdb1  part vfat       512M
sdb2  part ext4     927.2G
sdb3  part swap       3.8G
sr0   rom            1024M
loop0 loop squashfs   1.4G

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  1 running
sda1     1  0  1         /cdrom
sdb      1  0  0 running
sdb1     1  0  0         /mnt/boot-sav/sdb1
sdb2     1  0  0         /mnt/boot-sav/sdb2
sdb3     1  0  0         [SWAP]
sr0      1  0  1 running
loop0    1  1  0         /rofs


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1918964k,nr_inodes=479741,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=386720k,mode=755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=386720k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fb0 fd full fuse hugepages hwrng initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 9a 42 a3 0f 4e  4f 20 4e 41 4d 45 20 20  |..).B..NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     378M  6.0M  372M   2% /run
/dev/sda1      vfat      3.8G  1.5G  2.3G  39% /cdrom
/dev/loop0     squashfs  1.4G  1.4G     0 100% /rofs
/cow           overlay   1.9G   86M  1.8G   5% /
tmpfs          tmpfs     1.9G  240K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     1.9G  132K  1.9G   1% /tmp
tmpfs          tmpfs     378M  104K  378M   1% /run/user/999
/dev/sdb1      vfat      511M  3.4M  508M   1% /mnt/boot-sav/sdb1
/dev/sdb2      ext4      913G  4.3G  862G   1% /mnt/boot-sav/sdb2

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0005f9f3

Device     Boot Start     End Sectors  Size Id Type
/dev/sda1  *     2048 7821311 7819264  3.7G  c W95 FAT32 (LBA)


Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: FEF83830-080F-497C-84BB-1D2A25600BD6

Device          Start        End    Sectors   Size Type
/dev/sdb1        2048    1050623    1048576   512M EFI System
/dev/sdb2     1050624 1945495551 1944444928 927.2G Linux filesystem
/dev/sdb3  1945495552 1953523711    8028160   3.8G Linux swap




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb2, using the following options:        sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sdb1/efi/.../grub*.efi file!


=================== User settings
The settings chosen by the user will not act on the boot.

Dernière modification par quentind (Le 10/01/2018, à 18:03)

Hors ligne