Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 31/12/2017, à 16:42

Kaaria

Problème de BOOT même après Bootrepair [RESOLU]

Bonjour à tous,

Depuis peu, j'ai un message d'erreur qui s'affiche au démarrage concernant le GRUB. Impossible de booter quand ça se produit. Parfois j'ai aussi un écran noir avec invite de commande, je m'en sors généralement avec la commande

fsck -yf /dev/sda1

J'ai utilisé Bootrepair qui a réinstallé le Grub et mon problème persiste. Voici le rapport :

http://paste.ubuntu.com/26273876/

Il m'a aussi recommandé ceci:

"The boot files of [Ubuntu 16.04.3 LTS] are far from the start of the disk. Your Bios may not detect them. You may want to retry after creating a /boot partition (EXT4, > 200MB, start of the disk). This can be performed via tools such as Gparted. The select this partition via the [Separate /boot partition:] option of [Boot Repair]."

Après avoir parcouru le forum, je suis tombé sur une réponse de @malbo au problème de @Croa qui déconseille de créer une partition boot séparée :

https://forum.ubuntu-fr.org/viewtopic.p … #p21528290

Du coup, j'aimerais avoir vos conseils.

Merci d'avance pour vos réponses.

Dernière modification par Kaaria (Le 03/01/2018, à 17:39)


Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio

Hors ligne

#2 Le 31/12/2017, à 23:05

??

Re : Problème de BOOT même après Bootrepair [RESOLU]

Bonsoir
Soit ta méthode d'arrêt du ubuntu laisse á désirer, soit le disque est en mauvais état.
paragraphes 1 et 3.1 de https://doc.ubuntu-fr.org/smartmontools


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#3 Le 01/01/2018, à 00:01

Korak

Re : Problème de BOOT même après Bootrepair [RESOLU]

Bonjour,

Sans garantie de succès, passe à un noyau plus récent avec la commande :

sudo apt-get install --install-recommends linux-generic-hwe-16.04 xserver-xorg-hwe-16.04

A faire quand ton Ubuntu a démarré correctement !!!


OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF   Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur.   Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !

Hors ligne

#4 Le 01/01/2018, à 15:13

Kaaria

Re : Problème de BOOT même après Bootrepair [RESOLU]

?? a écrit :

Bonsoir
Soit ta méthode d'arrêt du ubuntu laisse á désirer, soit le disque est en mauvais état.
paragraphes 1 et 3.1 de https://doc.ubuntu-fr.org/smartmontools

Bonjour,

Merci pour ta réponse.

Le retour du scan smartmontools :

 karim@karim-G41MT-D3:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de karim : 
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.10.0-42-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD5000AAKX-001CA0
Serial Number:    WD-WCAYUC511235
LU WWN Device Id: 5 0014ee 158f51477
Firmware Version: 15.01H15
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Jan  1 15:08:54 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 8700) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  88) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3037)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       2
  3 Spin_Up_Time            0x0027   140   140   021    Pre-fail  Always       -       3958
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2790
  5 Reallocated_Sector_Ct   0x0033   195   195   140    Pre-fail  Always       -       100
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   057   057   000    Old_age   Always       -       31550
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2786
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       82
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2707
194 Temperature_Celsius     0x0022   102   088   000    Old_age   Always       -       41
196 Reallocated_Event_Count 0x0032   117   117   000    Old_age   Always       -       83
197 Current_Pending_Sector  0x0032   198   197   000    Old_age   Always       -       239
198 Offline_Uncorrectable   0x0030   199   198   000    Old_age   Offline      -       152
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   198   198   000    Old_age   Offline      -       471

SMART Error Log Version: 1
ATA Error Count: 908 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 908 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 10 83 67 e2  Error: UNC 8 sectors at LBA = 0x02678310 = 40338192

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 10 83 67 e2 08      00:08:01.450  READ DMA
  ec 00 00 00 00 00 a0 08      00:08:01.447  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:08:01.446  SET FEATURES [Set transfer mode]

Error 907 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 10 83 67 e2  Error: UNC 8 sectors at LBA = 0x02678310 = 40338192

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 10 83 67 e2 08      00:07:59.799  READ DMA
  c8 00 08 08 83 67 e2 08      00:07:59.799  READ DMA
  c8 00 08 00 83 67 e2 08      00:07:59.799  READ DMA
  c8 00 00 00 84 67 e2 08      00:07:59.791  READ DMA

Error 906 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 83 67 e2  Error: UNC at LBA = 0x02678310 = 40338192

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 00 83 67 e2 08      00:07:58.143  READ DMA
  c8 00 00 00 82 67 e2 08      00:07:58.138  READ DMA
  c8 00 00 00 81 67 e2 08      00:07:58.134  READ DMA
  c8 00 00 00 80 67 e2 08      00:07:58.129  READ DMA
  c8 00 00 00 7f 67 e2 08      00:07:58.126  READ DMA

Error 905 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 6a 20 00 e0  Error: UNC 8 sectors at LBA = 0x0000206a = 8298

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 68 20 00 e0 08      00:01:39.224  READ DMA
  ec 00 00 00 00 00 a0 08      00:01:39.218  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:01:39.218  SET FEATURES [Set transfer mode]

Error 904 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 6a 20 00 e0  Error: UNC 8 sectors at LBA = 0x0000206a = 8298

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 68 20 00 e0 08      00:01:37.564  READ DMA
  c8 00 08 60 20 00 e0 08      00:01:37.558  READ DMA
  c8 00 08 58 20 00 e0 08      00:01:37.550  READ DMA
  c8 00 08 50 20 00 e0 08      00:01:37.550  READ DMA
  c8 00 08 48 20 00 e0 08      00:01:37.549  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

karim@karim-G41MT-D3:~$  

Dernière modification par Kaaria (Le 01/01/2018, à 15:13)


Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio

Hors ligne

#5 Le 01/01/2018, à 18:54

??

Re : Problème de BOOT même après Bootrepair [RESOLU]

Bonjour
Ton disque a quelques anomalies, La dernière a été détectée à
Error 908 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)
alors que le disque a 17 heures de plus au compteur
  9 Power_On_Hours          0x0032   057   057   000    Old_age   Always       -       31550

Je pense donc que c'est c'est une fausse manipulation d'arrêt.

Cependant, il faut que tu saches que le disque risque d'avoir quelques difficultés à lire certains fichiers (Minima de fichiers fichiers 1 et maxima de fichiers 239)  Cela va dépendre si les 239 secteurs qui ne vont pas bien sont regroupés ou dispersés.
197 Current_Pending_Sector  0x0032   198   197   000    Old_age   Always       -       239

Par le passé, il a déjà récupéré 100 secteurs..... mais pour ces 239, il n'a pas réussi.
  5 Reallocated_Sector_Ct   0x0033   195   195   140    Pre-fail  Always       -       100

Dernière modification par ?? (Le 01/01/2018, à 18:55)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#6 Le 01/01/2018, à 19:24

Kaaria

Re : Problème de BOOT même après Bootrepair [RESOLU]

?? a écrit :

Bonjour
Ton disque a quelques anomalies, La dernière a été détectée à
Error 908 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)
alors que le disque a 17 heures de plus au compteur
  9 Power_On_Hours          0x0032   057   057   000    Old_age   Always       -       31550

Je pense donc que c'est c'est une fausse manipulation d'arrêt.

Cependant, il faut que tu saches que le disque risque d'avoir quelques difficultés à lire certains fichiers (Minima de fichiers fichiers 1 et maxima de fichiers 239)  Cela va dépendre si les 239 secteurs qui ne vont pas bien sont regroupés ou dispersés.
197 Current_Pending_Sector  0x0032   198   197   000    Old_age   Always       -       239

Par le passé, il a déjà récupéré 100 secteurs..... mais pour ces 239, il n'a pas réussi.
  5 Reallocated_Sector_Ct   0x0033   195   195   140    Pre-fail  Always       -       100

Est-ce qu'il y a une manip' à faire pour réparer ça ou alors il vaut mieux remplacer le disque dur?


Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio

Hors ligne

#7 Le 01/01/2018, à 20:25

??

Re : Problème de BOOT même après Bootrepair [RESOLU]

Pour l'instant, il n'y a pas lieu de changer de disque car je pense que ton problème de boot n'est pas lié.
Certains secteurs se réparent automatiquement lorsqu'on les réécrit mais c'est complexe d'identifier à quels fichiers ils appartiennent...


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#8 Le 01/01/2018, à 20:54

Kaaria

Re : Problème de BOOT même après Bootrepair [RESOLU]

?? a écrit :

Pour l'instant, il n'y a pas lieu de changer de disque car je pense que ton problème de boot n'est pas lié.
Certains secteurs se réparent automatiquement lorsqu'on les réécrit mais c'est complexe d'identifier à quels fichiers ils appartiennent...

Et la solution de @Korak peut être utile ou pas ? Parce que si le problème se représente, j'ai aucune solution à part le reset jusqu'à ce que ça boot...


Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio

Hors ligne

#9 Le 02/01/2018, à 15:06

??

Re : Problème de BOOT même après Bootrepair [RESOLU]

Bonjour
Lorsque le problème de boot reviendra, fait une photo qu'on voit bien ce qu'il y a écrit sur la totalité de l'écran.
Puis tu posteras la photo sur un site de partage de photo. https://doc.ubuntu-fr.org/capture_d_ecran et indiqueras le lien qui sera restitué.
On en saura alors un peu plus la vraie cause.

Pour le moment; contentes-toi d'être à jour du logiciel

sudo apt autoremove
sudo apt update
sudo apt upgrade

Dernière modification par ?? (Le 02/01/2018, à 15:07)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#10 Le 02/01/2018, à 15:22

Kaaria

Re : Problème de BOOT même après Bootrepair [RESOLU]

?? a écrit :

Bonjour
Lorsque le problème de boot reviendra, fait une photo qu'on voit bien ce qu'il y a écrit sur la totalité de l'écran.
Puis tu posteras la photo sur un site de partage de photo. https://doc.ubuntu-fr.org/capture_d_ecran et indiqueras le lien qui sera restitué.
On en saura alors un peu plus la vraie cause.

Pour le moment; contentes-toi d'être à jour du logiciel

sudo apt autoremove
sudo apt update
sudo apt upgrade

Ok, sinon je viens d'avoir un message d'alerte concernant le disque :

!Hard Disk Health Warning

The hard disk health status has changed. This could mean that hard drive failure is imminent. It is always a good idea to have up to date backups.

Et dans le détail il y a :

This message was generated by the smartd daemon running on:

   host name:  karim-G41MT-D3
   DNS domain: [Empty]

The following warning/error was logged by the smartd daemon:

Device: /dev/sda [SAT], 239 Currently unreadable (pending) sectors

Device info:
WDC WD5000AAKX-001CA0, S/N:WD-WCAYUC511235, WWN:5-0014ee-158f51477, FW:15.01H15, 500 GB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Mon Jan  1 15:06:47 2018 CET
Another message will be sent in 24 hours if the problem persists.


Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio

Hors ligne

#11 Le 02/01/2018, à 23:14

??

Re : Problème de BOOT même après Bootrepair [RESOLU]

Refais donc un rapport smartctl afin qu'on voit l'évolution. Car ton disque n'a pas tellement de secteurs de secours.

Dernière modification par ?? (Le 02/01/2018, à 23:14)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#12 Le 03/01/2018, à 15:27

Kaaria

Re : Problème de BOOT même après Bootrepair [RESOLU]

?? a écrit :

Refais donc un rapport smartctl afin qu'on voit l'évolution. Car ton disque n'a pas tellement de secteurs de secours.

Bonjour,

Le rapport smartmontools:

karim@karim-G41MT-D3:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de karim : 
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.10.0-42-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD5000AAKX-001CA0
Serial Number:    WD-WCAYUC511235
LU WWN Device Id: 5 0014ee 158f51477
Firmware Version: 15.01H15
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Jan  3 15:21:34 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 8700) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  88) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3037)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       2
  3 Spin_Up_Time            0x0027   140   140   021    Pre-fail  Always       -       3958
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2792
  5 Reallocated_Sector_Ct   0x0033   195   195   140    Pre-fail  Always       -       102
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   057   057   000    Old_age   Always       -       31580
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2788
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       82
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2709
194 Temperature_Celsius     0x0022   104   088   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   116   116   000    Old_age   Always       -       84
197 Current_Pending_Sector  0x0032   197   197   000    Old_age   Always       -       246
198 Offline_Uncorrectable   0x0030   199   198   000    Old_age   Offline      -       132
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   198   198   000    Old_age   Offline      -       425

SMART Error Log Version: 1
ATA Error Count: 1204 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1204 occurred at disk power-on lifetime: 31577 hours (1315 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b9 1e 67 e2  Error: UNC at LBA = 0x02671eb9 = 40312505

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 48 1e 67 e2 08      16:02:52.101  READ DMA
  c8 00 00 68 a2 6b e0 08      16:02:52.096  READ DMA
  c8 00 00 00 09 67 e2 08      16:02:52.096  READ DMA
  ec 00 00 00 00 00 a0 08      16:02:52.092  IDENTIFY DEVICE

Error 1203 occurred at disk power-on lifetime: 31577 hours (1315 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 cc 1d 67 e2  Error: UNC at LBA = 0x02671dcc = 40312268

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 48 1d 67 e2 08      16:02:50.450  READ DMA
  c8 00 00 48 1c 67 e2 08      16:02:50.449  READ DMA
  c8 00 00 48 1b 67 e2 08      16:02:50.448  READ DMA
  c8 00 80 c8 1a 67 e2 08      16:02:50.448  READ DMA
  c8 00 00 c8 19 67 e2 08      16:02:50.446  READ DMA

Error 1202 occurred at disk power-on lifetime: 31576 hours (1315 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 b9 1e 67 e2  Error: UNC 8 sectors at LBA = 0x02671eb9 = 40312505

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 b8 1e 67 e2 08      15:42:32.919  READ DMA

Error 1201 occurred at disk power-on lifetime: 31576 hours (1315 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 b9 1e 67 e2  Error: UNC 8 sectors at LBA = 0x02671eb9 = 40312505

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 b8 1e 67 e2 08      15:42:30.889  READ DMA
  c8 00 08 b0 1e 67 e2 08      15:42:30.889  READ DMA
  c8 00 08 a8 1e 67 e2 08      15:42:30.889  READ DMA
  c8 00 08 a0 1e 67 e2 08      15:42:30.888  READ DMA
  c8 00 08 98 1e 67 e2 08      15:42:30.888  READ DMA

Error 1200 occurred at disk power-on lifetime: 31576 hours (1315 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b9 1e 67 e2  Error: UNC at LBA = 0x02671eb9 = 40312505

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 48 1e 67 e2 08      15:42:28.928  READ DMA
  c8 00 00 48 1d 67 e2 08      15:42:28.928  READ DMA
  c8 00 00 48 1c 67 e2 08      15:42:28.927  READ DMA
  c8 00 00 48 1b 67 e2 08      15:42:28.926  READ DMA
  c8 00 80 c8 1a 67 e2 08      15:42:28.926  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

karim@karim-G41MT-D3:~$ 

Dernière modification par Kaaria (Le 03/01/2018, à 15:27)


Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio

Hors ligne

#13 Le 03/01/2018, à 16:16

??

Re : Problème de BOOT même après Bootrepair [RESOLU]

Bonjour
L'état avant

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   195   195   140    Pre-fail  Always       -       100
  9 Power_On_Hours          0x0032   057   057   000    Old_age   Always       -       31550
197 Current_Pending_Sector  0x0032   198   197   000    Old_age   Always       -       239
Error 908 occurred at disk power-on lifetime: 31533 hours (1313 days + 21 hours)

L'état après

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   195   195   140    Pre-fail  Always       -       102
  9 Power_On_Hours          0x0032   057   057   000    Old_age   Always       -       31580
197 Current_Pending_Sector  0x0032   197   197   000    Old_age   Always       -       246
Error 1204 occurred at disk power-on lifetime: 31577 hours (1315 days + 17 hours)

On a donc réussi à récupérer 2 secteurs mais  au lieu d'en avoir 2 de moins en attente, il y en a eu 9 nouveaux.

les neuf derniers secteurs repérés

Error: UNC at LBA = 0x02671dcc = 40312268
Error: UNC 8 sectors at LBA = 0x02671eb9 = 40312505

Mais le plus important est l'arrivée de 296 nouvelles erreurs de lectures/écriture  en 44 heures seulement
L'alerte me semble justifiée....

Mais cela ne veut pas dire que c'est catastrophique,   Ces neuf secteurs ont pu être tentés d'être lus de multiples fois, ce qui a  fait grimper en flèche la quantité d'erreurs!

Dernière modification par ?? (Le 03/01/2018, à 16:28)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#14 Le 03/01/2018, à 17:37

Kaaria

Re : Problème de BOOT même après Bootrepair [RESOLU]

?? a écrit :

Mais le plus important est l'arrivée de 296 nouvelles erreurs de lectures/écriture  en 44 heures seulement
L'alerte me semble justifiée....

Mais cela ne veut pas dire que c'est catastrophique,   Ces neuf secteurs ont pu être tentés d'être lus de multiples fois, ce qui a  fait grimper en flèche la quantité d'erreurs!

D'accord. Depuis que j'ai posté, le problème de boot s'est pas reproduit. J'avais la mauvaise habitude d'éteindre directement la machine sans me déconnecter de la session, c'est peut-être l'origine du problème...

Pour le moment plus grand chose à faire, donc je vais mettre le sujet en résolu.

Merci pour ton aide, si le problème revient j'ouvrirai un autre sujet avec captures d'écran.


Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio

Hors ligne

#15 Le 03/01/2018, à 19:24

??

Re : Problème de BOOT même après Bootrepair [RESOLU]

Kaaria a écrit :

J'avais la mauvaise habitude d'éteindre directement la machine sans me déconnecter de la session, c'est peut-être l'origine du problème...
.

Si tu appuies sur le bouton power-off au lieu de te servir de ta souris  pour demander l'arrêt ou de frapper la commande

shutdown

C'est la cause à 100%


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne