#1 Le 21/10/2017, à 09:43
- philouo
[Résolu]Installer ubuntu avec l'acpi
Bonjour à tous.
J'ai à l'heure actuel un PC portable MSI GE752 6QC sous la configuration suivante :
ubuntu 16.04 en session efi
un ssd m2 de 250g et un dd de 1T les deux GPT
la partition racine sur le ssd
une partion swap sur le ssd
une partition home sur le dd
un windows 10 sur le ssd que je n'utilise pas
Malheureusement, j'ai beaucoup de soucis (bugs à la sortie de veille, pas de bluetooth) je souhaite donc refaire mon installe complet.
Pour eviter de tout perdre, j'ai mis à la place un seul dd de 160Gb.
Voici dans l'ordre l'installation que j'ai fais :
remise à usine de l'uefi
Désactivation du secure boot
passage du boot mode en uefi
Démarrage du try ubuntu avec l'option acpi=off (obligatoire sinon freeze du démarrage
Passage du dd en GPT (obligatoire pour de l'uefi)
Création d'une première partition de type Fat32 de 350Mo avec l’ajout du flag esp (aussi obligatoire pour uefi)
puis une partition / en ext4 et une partition swap de 8g
L'installation s'est bien passer.
Mon problème est que je dois toujours redémarrer avec acpi=off et quand je veux éteindre le pc ça plante.
Ma question est comment, je peux conserver l'acpi sur mon pc.
Pour ma config précédente, j'ai aussi du éteindre acpi et je pense que cela réduit considérablement la durée de la batterie et visiblement empêche d'éteindre comme il faut.
Merci d'avance pour votre aide.
Dernière modification par philouo (Le 02/11/2017, à 11:44)
Hors ligne
#2 Le 23/10/2017, à 10:32
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Lors de mes tentatives, j'ai trouver ce tuto pour installer ubuntu sur un msi.
J'ai adapter mon installe en utilisant uefi au lieu de legacy.
L'installation et l'utilisation se sont bien passé. Le démarrage reste lent. Je vais tester un peu plus en profondeur.
Pour les connaisseurs, voici un pastebin de mon boot-info. Hésiter pas à me mettre un message si vous voyer des erreurs.
En esperant que cette installe soit la bonne.
Dernière modification par philouo (Le 23/10/2017, à 10:56)
Hors ligne
#3 Le 23/10/2017, à 11:06
- Nuliel
Re : [Résolu]Installer ubuntu avec l'acpi
Bonjour,
1) Tu es sûr du nom de ton pc? J'arrive pas à le trouver sur internet. En particulier, peux tu donner le nom de la carte graphique et le nom du processeur? (ou les retours de lscpu et lspci)
2) Le boot info est pas disponible, peux tu éditer ton message pour qu'il le soit? Edit: il l'est maintenant
3) As tu installé les pilotes propriétaires pour ta carte graphique et ton processeur?
4) As tu tenté de démarrer qu'avec seulement le paramètre "modprobe.blacklist=nouveau" (donc sans acpi=off)
5) As tu suivi la partie configuration du bios du tuto et si tu n'as pas certains paramètres dans ton bios peux tu les lister?
Dernière modification par Nuliel (Le 23/10/2017, à 11:07)
Hors ligne
#4 Le 23/10/2017, à 17:56
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Bonjour ublender.
Je viens de voir l'erreur de mon post. Il s'agit d'un msi GE72 6qc-085xfr.
Le CPU est un core i5 6300HQ et la GPU est une nvidia GTX 960M.
Pour le bios, j'ai suivis la config du tuto avec comme seule difference le boot mode select que j'ai mis en uefi.
Après j'ai uniquement suivit le tuto hormis la partie sur la partie de modifier le grub pour ubuntu 16 car je n'avais pas de parametre rajouté, et tout fonctionne à merveille. Aucuns soucis sur la sortie de veille ou l'extinction.
Je prevois de faire l'install sur les vrais dd et ssd.
J'avoue ne pas connaitre en boot info, vois tu des erreurs ?
Merci pour ton aide.
Hors ligne
#5 Le 23/10/2017, à 21:52
- Nuliel
Re : [Résolu]Installer ubuntu avec l'acpi
Je pense que tous les problèmes que tu as viennent de l'acpi (acpi=off c'est brutal, il faudrait trouver quelque chose de plus doux). Ce serait peut être bien de régler le problème d'acpi avant de refaire l'install
Actuellement, les paramètres noyau que tu utilises, c'est que acpi=off? Si oui, peux tu tenter de booter qu'avec "modprobe.blacklist=nouveau" et voir si tu peux éteindre le pc?
Je veux bien après un redémarrage sans aucun paramètre noyau le retour entre balises code de
dmesg(je demande après un redémarrage pour éviter d'avoir trop d'infos inutiles, car le retour va être conséquent)
Et je veux bien le contenu de /etc/default/grub avec par exemple
cat /etc/default/grubEt pour les pilotes propriétaires de la carte graphique et du processeur, ils sont installés? (dans pilotes additionnels)
J'avais pas compris que l'installation actuelle n'était pas sur le ssd et hdd. Si tu fais une réinstallation, pour la procédure, je te conseille de mettre les partitions swap et home sur le hdd, la racine sur le ssd.
Assures toi que tu as la version 16.04.3 d'ubuntu sur ton live usb (quitte à refaire le live usb) afin d'avoir des noyaux plus récents.
Pour la partie GPT et partition efi, j'avoue que j'y connais pas grand chose (j'ai fait que deux installs sur des systèmes uefi à côté de windows, et c'était en mode presque automatique sur un hdd, donc j'ai vraiment touché à rien sur la partition gpt).
Pour le boot info, si tu changes le ssd et hdd et que tu fais une install, le boot info sera pas le même, mais j'ai pas vu de problème (cela dit j'en lis presque jamais)
Dernière modification par Nuliel (Le 23/10/2017, à 22:01)
Hors ligne
#6 Le 23/10/2017, à 22:19
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
hello. Du coup si je suis le lien, je n'utilise de parametre noyau que pour l'install et les 2 premiers boots. J'utilise du coup acpi=off et nouveau.blacklist=1.
Je mettrais les retours des commandes demain car il me faut rouvrir tout le pc pour remettre le dd.
Pour les pilotes, je suis sur la nvidia et pour le CPU je le confirmerais demain.
Pour le grub je ne l'ai pas toucher mais je peux qunad meme mettre un retour.
Pourquoi mettre le swap sur le hdd qui normalement est plus lent que le ssd ?
Merci pour ton aide.
Hors ligne
#7 Le 23/10/2017, à 22:37
- Nuliel
Re : [Résolu]Installer ubuntu avec l'acpi
En résumé, un premier démarrage avec modprobe.blacklist=nouveau seulement (donc pas acpi=off) afin de savoir si l'extinction se fait bien
un deuxième démarrage sans paramètre afin de récupérer des infos (surtout dmesg)
Pour le grub, il me semble qu'il y a une blague à l'installation: il peut arriver que les paramètres noyau utilisés à l'install soient installés par défaut (donc que tu les as à tous les démarrages, pas cool dans le cas acpi=off)
Pour l'install, tu peux utiliser acpi=off, du moment que l'installation se passe, après c'est qu'un jeu de paramètres noyau.
Pour le swap sur le hdd et pas sur le ssd, c'est parce que le ssd a un cycle d'écriture limité, et que si tu swappes, il va y avoir énormément d'écriture sur le disque, donc ton ssd va s'abîmer. Au passage, il faudra régler le swapiness si c'est pas fait (je sais pas combien tu as de ram mais tu dois en avoir pas mal, et il y a pas d'urgence à le faire)
Dernière modification par Nuliel (Le 23/10/2017, à 22:40)
Hors ligne
#8 Le 24/10/2017, à 09:01
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Hello.
Pour les pilotes, je n'ai pas le CPU de séléctionner et pour le GPU, j'ai X.Org de séléctionner mais si je fais détails ubuntu j'ai grapihcs : GeForce GTX 960M
Pour la commande dmesg:
john@john-GE72-6QC:~$ dmesg
[ 0.000000] Linux version 4.10.0-37-generic (buildd@lgw01-amd64-037) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #41~16.04.1-Ubuntu SMP Fri Oct 6 22:42:59 UTC 2017 (Ubuntu 4.10.0-37.41~16.04.1-generic 4.10.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-37-generic.efi.signed root=UUID=7c229ba3-f761-4423-b2f5-8569ead9cc7e ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006a6dafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006a6db000-0x000000006a6dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006a6dc000-0x000000006a705fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006a706000-0x000000006a75cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006a75d000-0x000000006ac6dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ac6e000-0x00000000768b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000768b3000-0x0000000077337fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077338000-0x00000000777dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000777db000-0x0000000077b85fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077b86000-0x0000000077f81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077f82000-0x0000000077ffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000281ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x77ec8e98 ACPI=0x778df000 ACPI 2.0=0x778df000 SMBIOS=0x77ec7000 SMBIOS 3.0=0x77ec6000
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GE72 6QC/MS-1795, BIOS E1795IMS.114 04/29/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x282000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0079000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0078800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x0000000077ec8e98 to 0x0000000077ec8ed0.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8fb1c0098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x161828000, 0x161828fff] PGTABLE
[ 0.000000] BRK [0x161829000, 0x161829fff] PGTABLE
[ 0.000000] BRK [0x16182a000, 0x16182afff] PGTABLE
[ 0.000000] BRK [0x16182b000, 0x16182bfff] PGTABLE
[ 0.000000] BRK [0x16182c000, 0x16182cfff] PGTABLE
[ 0.000000] BRK [0x16182d000, 0x16182dfff] PGTABLE
[ 0.000000] BRK [0x16182e000, 0x16182efff] PGTABLE
[ 0.000000] BRK [0x16182f000, 0x16182ffff] PGTABLE
[ 0.000000] BRK [0x161830000, 0x161830fff] PGTABLE
[ 0.000000] BRK [0x161831000, 0x161831fff] PGTABLE
[ 0.000000] BRK [0x161832000, 0x161832fff] PGTABLE
[ 0.000000] BRK [0x161833000, 0x161833fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x32382000-0x351b8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000778DF000 000024 (v02 MSI_NB)
[ 0.000000] ACPI: XSDT 0x00000000778DF0B0 0000DC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000077903080 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000778DF220 023E5A (v02 MSI_NB MEGABOOK 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000077B85F80 000040
[ 0.000000] ACPI: APIC 0x0000000077903190 000084 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000077903218 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000077903260 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x0000000077903300 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
[ 0.000000] ACPI: MCFG 0x00000000779033C8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000077903408 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x0000000077903440 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x0000000077903758 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000779037F0 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000077903A38 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000779065E8 000CF3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x00000000779072E0 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x0000000077907318 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000077907370 00061A (v02 AMI xh_rvp11 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000077907990 005552 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x000000007790CEE8 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000007790CF30 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: BGRT 0x000000007790DD88 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007790DDC0 00009F (v02 SgRef SgPeg 00001000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x000000007790DE60 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000007790DF08 0013D0 (v01 OptRef OptTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x000000007790F2D8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000281ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x281fd5000-0x281ffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000281ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000006a6dafff]
[ 0.000000] node 0: [mem 0x000000006a706000-0x000000006a75cfff]
[ 0.000000] node 0: [mem 0x000000006ac6e000-0x00000000768b2fff]
[ 0.000000] node 0: [mem 0x0000000077338000-0x00000000777dafff]
[ 0.000000] node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000281ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000281ffffff]
[ 0.000000] On node 0 totalpages: 2066359
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7521 pages used for memmap
[ 0.000000] DMA32 zone: 481307 pages, LIFO batch:31
[ 0.000000] Normal zone: 24704 pages used for memmap
[ 0.000000] Normal zone: 1581056 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x000000007cffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6a6db000-0x6a6dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6a6dc000-0x6a705fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6a75d000-0x6ac6dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x768b3000-0x77337fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x777db000-0x77b85fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77b86000-0x77f81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77f82000-0x77ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7cffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7d000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8fb441c00000 s107992 r8192 d31272 u524288
[ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2034048
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-37-generic.efi.signed root=UUID=7c229ba3-f761-4423-b2f5-8569ead9cc7e ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7793884K/8265436K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 471552K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:1024 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2300.000 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=9216000)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000034] ACPI: Core revision 20160930
[ 0.027746] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[ 0.027752] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[ 0.027797] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp11) while loading table (20160930/tbxfload-228)
[ 0.037140] ACPI Error: 1 table load failures, 9 successful (20160930/tbxfload-246)
[ 0.037798] Security Framework initialized
[ 0.037799] Yama: becoming mindful.
[ 0.037811] AppArmor: AppArmor initialized
[ 0.038227] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039699] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040374] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040381] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040611] CPU: Physical Processor ID: 0
[ 0.040611] CPU: Processor Core ID: 0
[ 0.040615] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040616] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.040620] mce: CPU supports 10 MCE banks
[ 0.040629] CPU0: Thermal monitoring enabled (TM1)
[ 0.040648] process: using mwait in idle threads
[ 0.040650] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.040651] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.041168] Freeing SMP alternatives memory: 32K
[ 0.048319] ftrace: allocating 34228 entries in 134 pages
[ 0.064352] smpboot: Max logical packages: 1
[ 0.064356] DMAR: Host address width 39
[ 0.064357] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.064363] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e
[ 0.064363] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.064367] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.064367] DMAR: RMRR base: 0x000000770da000 end: 0x000000770f9fff
[ 0.064368] DMAR: RMRR base: 0x00000078800000 end: 0x0000007cffffff
[ 0.064370] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.064371] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.064371] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.064372] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.065763] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.065764] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.069780] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.109471] TSC deadline timer enabled
[ 0.109475] smpboot: CPU0: Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.109516] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.109545] ... version: 4
[ 0.109546] ... bit width: 48
[ 0.109546] ... generic registers: 8
[ 0.109547] ... value mask: 0000ffffffffffff
[ 0.109547] ... max period: 00007fffffffffff
[ 0.109547] ... fixed-purpose events: 3
[ 0.109548] ... event mask: 00000007000000ff
[ 0.110338] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.110349] smp: Bringing up secondary CPUs ...
[ 0.110405] x86: Booting SMP configuration:
[ 0.110406] .... node #0, CPUs: #1 #2 #3
[ 0.112156] smp: Brought up 1 node, 4 CPUs
[ 0.112158] smpboot: Total of 4 processors activated (18432.00 BogoMIPS)
[ 0.115756] devtmpfs: initialized
[ 0.115805] x86/mm: Memory block size: 128MB
[ 0.117882] evm: security.selinux
[ 0.117882] evm: security.SMACK64
[ 0.117883] evm: security.SMACK64EXEC
[ 0.117883] evm: security.SMACK64TRANSMUTE
[ 0.117884] evm: security.SMACK64MMAP
[ 0.117884] evm: security.ima
[ 0.117884] evm: security.capability
[ 0.117935] PM: Registering ACPI NVS region [mem 0x6a6db000-0x6a6dbfff] (4096 bytes)
[ 0.117936] PM: Registering ACPI NVS region [mem 0x777db000-0x77b85fff] (3846144 bytes)
[ 0.118022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.118029] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.118063] pinctrl core: initialized pinctrl subsystem
[ 0.118216] RTC time: 6:23:03, date: 10/24/17
[ 0.119320] NET: Registered protocol family 16
[ 0.135499] cpuidle: using governor ladder
[ 0.147503] cpuidle: using governor menu
[ 0.147504] PCCT header not found.
[ 0.147536] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.147537] ACPI: bus type PCI registered
[ 0.147538] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.147600] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.147602] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.147614] PCI: Using configuration type 1 for base access
[ 0.163593] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.163594] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.163810] ACPI: Added _OSI(Module Device)
[ 0.163811] ACPI: Added _OSI(Processor Device)
[ 0.163811] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163812] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.163815] ACPI : EC: EC started
[ 0.163815] ACPI : EC: interrupt blocked
[ 0.165861] ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[ 0.165867] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8fb4390f25c8), AE_NOT_FOUND (20160930/psparse-543)
[ 0.165884] ACPI: \: Used as first EC
[ 0.165885] ACPI: \: GPE=0x0, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.165885] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.166984] ACPI: Executed 24 blocks of module-level executable AML code
[ 0.182501] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.186593] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.190676] ACPI : EC: EC stopped
[ 0.190676] ACPI : EC: EC started
[ 0.190677] ACPI : EC: interrupt blocked
[ 0.192257] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.192259] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.192260] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.192260] ACPI: Interpreter enabled
[ 0.192303] ACPI: (supports S0 S3 S4 S5)
[ 0.192304] ACPI: Using IOAPIC for interrupt routing
[ 0.192341] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.194622] ACPI: Power Resource [PG00] (on)
[ 0.195367] ACPI: Power Resource [PG01] (on)
[ 0.195741] ACPI: Power Resource [PG02] (on)
[ 0.198609] ACPI: Power Resource [WRST] (off)
[ 0.198939] ACPI: Power Resource [WRST] (off)
[ 0.199269] ACPI: Power Resource [WRST] (off)
[ 0.199600] ACPI: Power Resource [WRST] (off)
[ 0.199929] ACPI: Power Resource [WRST] (off)
[ 0.200263] ACPI: Power Resource [WRST] (off)
[ 0.200591] ACPI: Power Resource [WRST] (off)
[ 0.200917] ACPI: Power Resource [WRST] (off)
[ 0.201250] ACPI: Power Resource [WRST] (off)
[ 0.201575] ACPI: Power Resource [WRST] (off)
[ 0.201905] ACPI: Power Resource [WRST] (off)
[ 0.202237] ACPI: Power Resource [WRST] (off)
[ 0.202568] ACPI: Power Resource [WRST] (off)
[ 0.202894] ACPI: Power Resource [WRST] (off)
[ 0.203222] ACPI: Power Resource [WRST] (off)
[ 0.203550] ACPI: Power Resource [WRST] (off)
[ 0.203881] ACPI: Power Resource [WRST] (off)
[ 0.204209] ACPI: Power Resource [WRST] (off)
[ 0.204537] ACPI: Power Resource [WRST] (off)
[ 0.204864] ACPI: Power Resource [WRST] (off)
[ 0.212350] ACPI: Power Resource [FN00] (off)
[ 0.212421] ACPI: Power Resource [FN01] (off)
[ 0.212490] ACPI: Power Resource [FN02] (off)
[ 0.212557] ACPI: Power Resource [FN03] (off)
[ 0.212625] ACPI: Power Resource [FN04] (off)
[ 0.213673] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.213678] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.215084] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.215085] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.215638] PCI host bridge to bus 0000:00
[ 0.215640] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.215641] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.215642] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.215643] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.215644] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.215644] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.215645] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.215646] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.215647] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.215648] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.215649] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.215650] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.215651] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.215652] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.215652] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.215653] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.215654] pci_bus 0000:00: root bus resource [mem 0x7d000000-0xdfffffff window]
[ 0.215655] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
[ 0.215656] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.215657] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.215664] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[ 0.215992] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.216033] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.216159] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.216214] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[ 0.216222] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.216227] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.216231] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.216419] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.216436] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[ 0.216500] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.216611] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.216645] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.216660] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[ 0.216822] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.216837] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[ 0.216888] pci 0000:00:16.0: PME# supported from D3hot
[ 0.217035] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.217048] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[ 0.217054] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[ 0.217061] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.217067] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.217073] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.217080] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[ 0.217118] pci 0000:00:17.0: PME# supported from D3hot
[ 0.217258] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.217314] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.217438] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.217474] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.217530] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.217651] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.217701] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[ 0.217921] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.217930] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[ 0.218093] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.218112] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[ 0.218136] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[ 0.218182] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.218349] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.218385] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.218431] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[ 0.218500] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.218743] pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
[ 0.218761] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.218778] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.218795] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.218806] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.218817] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.218936] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.227597] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.227599] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.227601] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.227604] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.227706] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.227737] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[ 0.227893] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.227996] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.228031] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.228034] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.228122] pci 0000:03:00.0: [1969:e0a1] type 00 class 0x020000
[ 0.228146] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit]
[ 0.228156] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.228261] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.228334] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.228364] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.228366] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.228369] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.230798] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.230844] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.230889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.230932] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.230976] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.231019] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.231062] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.231105] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.231496] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.231599] ACPI : EC: interrupt unblocked
[ 0.231611] ACPI : EC: event unblocked
[ 0.231622] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.231623] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.231849] SCSI subsystem initialized
[ 0.231876] libata version 3.00 loaded.
[ 0.231906] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.231908] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.231910] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.231910] vgaarb: loaded
[ 0.231925] ACPI: bus type USB registered
[ 0.231937] usbcore: registered new interface driver usbfs
[ 0.231943] usbcore: registered new interface driver hub
[ 0.231954] usbcore: registered new device driver usb
[ 0.232010] Registered efivars operations
[ 0.235817] PCI: Using ACPI for IRQ routing
[ 0.263822] PCI: pci_cache_line_size set to 64 bytes
[ 0.263876] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.263877] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.263878] e820: reserve RAM buffer [mem 0x6a6db000-0x6bffffff]
[ 0.263879] e820: reserve RAM buffer [mem 0x6a75d000-0x6bffffff]
[ 0.263880] e820: reserve RAM buffer [mem 0x768b3000-0x77ffffff]
[ 0.263881] e820: reserve RAM buffer [mem 0x777db000-0x77ffffff]
[ 0.263882] e820: reserve RAM buffer [mem 0x282000000-0x283ffffff]
[ 0.263955] NetLabel: Initializing
[ 0.263956] NetLabel: domain hash size = 128
[ 0.263956] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.263968] NetLabel: unlabeled traffic allowed by default
[ 0.264063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.264067] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.266108] clocksource: Switched to clocksource hpet
[ 0.272449] VFS: Disk quotas dquot_6.6.0
[ 0.272462] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.272537] AppArmor: AppArmor Filesystem Enabled
[ 0.272567] pnp: PnP ACPI init
[ 0.272676] pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[ 0.272713] pnp 00:01: Plug and Play ACPI device, IDs SYN1507 SYN1500 SYN0002 PNP0f13 (active)
[ 0.272833] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.272834] system 00:02: [io 0xffff] has been reserved
[ 0.272835] system 00:02: [io 0xffff] has been reserved
[ 0.272836] system 00:02: [io 0xffff] has been reserved
[ 0.272837] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.272838] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.272844] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272930] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.272931] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272949] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.272982] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.272984] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.273578] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.273579] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.273580] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.273581] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.273582] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.273583] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.273584] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.273586] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.273587] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.273588] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.273590] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.273626] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.273627] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.273628] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.273630] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.273631] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.273632] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.273633] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.273634] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.273926] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.273928] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275019] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.275020] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.275021] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.275023] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275841] pnp: PnP ACPI: found 10 devices
[ 0.282641] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.282664] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.282666] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.282668] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.282670] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.282674] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.282677] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.282682] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.282684] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.282687] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.282693] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.282694] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.282695] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.282696] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.282697] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.282697] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.282698] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.282699] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.282700] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.282701] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.282702] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.282703] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.282703] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.282704] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.282705] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.282706] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.282707] pci_bus 0000:00: resource 20 [mem 0x7d000000-0xdfffffff window]
[ 0.282708] pci_bus 0000:00: resource 21 [mem 0xfc000000-0xfc00ffff window]
[ 0.282709] pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
[ 0.282710] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.282711] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.282711] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.282712] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.282713] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.282714] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.282846] NET: Registered protocol family 2
[ 0.282969] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.283072] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.283219] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.283238] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.283261] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.283303] NET: Registered protocol family 1
[ 0.283314] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.283573] PCI: CLS 0 bytes, default 64
[ 0.283615] Unpacking initramfs...
[ 0.975925] Freeing initrd memory: 47324K
[ 0.975963] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.975966] software IO TLB [mem 0x65831000-0x69831000] (64MB) mapped at [ffff8fb225831000-ffff8fb229830fff]
[ 0.976111] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[ 0.976195] Scanning for low memory corruption every 60 seconds
[ 0.976489] audit: initializing netlink subsys (disabled)
[ 0.976551] audit: type=2000 audit(1508826183.964:1): initialized
[ 0.976950] Initialise system trusted keyrings
[ 0.977035] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.978336] zbud: loaded
[ 0.978724] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.978904] fuse init (API version 7.26)
[ 0.980435] Key type asymmetric registered
[ 0.980436] Asymmetric key parser 'x509' registered
[ 0.980463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.980493] io scheduler noop registered
[ 0.980494] io scheduler deadline registered
[ 0.980501] io scheduler cfq registered (default)
[ 0.981147] pcieport 0000:00:1c.0: AER enabled with IRQ 123
[ 0.981164] pcieport 0000:00:1c.3: AER enabled with IRQ 124
[ 0.981175] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[ 0.981183] pcieport 0000:00:1c.0: Signaling PME with IRQ 123
[ 0.981190] pcieport 0000:00:1c.3: Signaling PME with IRQ 124
[ 0.981227] efifb: probing for efifb
[ 0.981237] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[ 0.981238] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.981238] efifb: scrolling: redraw
[ 0.981239] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.981322] Console: switching to colour frame buffer device 240x67
[ 0.981342] fb0: EFI VGA frame buffer device
[ 0.981349] intel_idle: MWAIT substates: 0x11142120
[ 0.981349] intel_idle: v0.4.1 model 0x5E
[ 0.981545] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.981784] ACPI: AC Adapter [ADP1] (off-line)
[ 0.982032] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:01/PNP0C0D:00/input/input0
[ 0.982050] ACPI: Lid Switch [LID0]
[ 0.982090] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.982094] ACPI: Sleep Button [SLPB]
[ 0.982141] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.982143] ACPI: Power Button [PWRB]
[ 0.982170] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.982171] ACPI: Power Button [PWRF]
[ 0.983069] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.983466] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.983467] ACPI: Thermal Zone [THRM] (34 C)
[ 0.983810] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.983811] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.983942] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.983943] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.983974] GHES: HEST is not enabled!
[ 0.984226] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.986512] Linux agpgart interface v0.103
[ 0.988491] loop: module loaded
[ 0.988619] libphy: Fixed MDIO Bus: probed
[ 0.988619] tun: Universal TUN/TAP device driver, 1.6
[ 0.988620] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.988653] PPP generic driver version 2.4.2
[ 0.988690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.988692] ehci-pci: EHCI PCI platform driver
[ 0.988699] ehci-platform: EHCI generic platform driver
[ 0.988706] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.988711] ohci-pci: OHCI PCI platform driver
[ 0.988719] ohci-platform: OHCI generic platform driver
[ 0.988724] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.988856] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.988860] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.989946] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.989950] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.990019] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.990020] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.990021] usb usb1: Product: xHCI Host Controller
[ 0.990021] usb usb1: Manufacturer: Linux 4.10.0-37-generic xhci-hcd
[ 0.990022] usb usb1: SerialNumber: 0000:00:14.0
[ 0.990125] hub 1-0:1.0: USB hub found
[ 0.990156] hub 1-0:1.0: 16 ports detected
[ 1.002310] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.002313] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.002335] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.002336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.002337] usb usb2: Product: xHCI Host Controller
[ 1.002338] usb usb2: Manufacturer: Linux 4.10.0-37-generic xhci-hcd
[ 1.002339] usb usb2: SerialNumber: 0000:00:14.0
[ 1.002437] hub 2-0:1.0: USB hub found
[ 1.002446] hub 2-0:1.0: 8 ports detected
[ 1.008501] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.012701] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.012703] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.012884] mousedev: PS/2 mouse device common for all mice
[ 1.013226] rtc_cmos 00:04: RTC can wake from S4
[ 1.013611] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.013691] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.013695] i2c /dev entries driver
[ 1.013732] device-mapper: uevent: version 1.0.3
[ 1.013797] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.013799] intel_pstate: Intel P-state driver initializing
[ 1.014125] intel_pstate: HWP enabled
[ 1.014218] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.014219] EFI Variables Facility v0.08 2004-May-17
[ 1.018709] NET: Registered protocol family 10
[ 1.022468] Segment Routing with IPv6
[ 1.022482] NET: Registered protocol family 17
[ 1.022488] Key type dns_resolver registered
[ 1.022831] microcode: sig=0x506e3, pf=0x20, revision=0x84
[ 1.022977] microcode: Microcode Update Driver: v2.2.
[ 1.023151] registered taskstats version 1
[ 1.023157] Loading compiled-in X.509 certificates
[ 1.023946] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.025541] Loaded X.509 cert 'Build time autogenerated kernel key: ebb0dc598d000e9bec363d7c6e3d1e7183d2dba1'
[ 1.025553] zswap: loaded using pool lzo/zbud
[ 1.037610] Key type big_key registered
[ 1.037613] Key type trusted registered
[ 1.039932] Key type encrypted registered
[ 1.039952] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.039954] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.039969] evm: HMAC attrs: 0x1
[ 1.040716] Magic number: 5:286:368
[ 1.040945] rtc_cmos 00:04: setting system clock to 2017-10-24 06:23:04 UTC (1508826184)
[ 1.041167] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.041167] EDD information not available.
[ 1.041222] PM: Hibernation image not present or could not be loaded.
[ 1.094242] ACPI: Battery Slot [BAT1] (battery present)
[ 1.095908] Freeing unused kernel memory: 2228K
[ 1.095908] Write protecting the kernel read-only data: 14336k
[ 1.096291] Freeing unused kernel memory: 1156K
[ 1.096831] Freeing unused kernel memory: 268K
[ 1.103454] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.113511] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.113576] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.113584] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.113983] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.114006] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.114275] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.114286] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.114299] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.114324] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.114329] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.138068] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.141918] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.161457] ahci 0000:00:17.0: version 3.0
[ 1.162256] [drm] Initialized
[ 1.171632] nvidia: loading out-of-tree module taints kernel.
[ 1.171636] nvidia: module license 'NVIDIA' taints kernel.
[ 1.171637] Disabling lock debugging due to kernel taint
[ 1.171747] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xe impl SATA mode
[ 1.171749] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.175219] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:84:c7:d9]
[ 1.178137] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.182330] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.182551] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[ 1.182562] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.82 Wed Jul 19 21:16:49 PDT 2017 (using threaded interrupts)
[ 1.183860] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.82 Wed Jul 19 20:35:11 PDT 2017
[ 1.184548] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 1.194739] scsi host0: ahci
[ 1.198404] scsi host1: ahci
[ 1.198524] scsi host2: ahci
[ 1.199769] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 1.200839] scsi host3: ahci
[ 1.200881] ata1: DUMMY
[ 1.200883] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 126
[ 1.200888] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 126
[ 1.200892] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 126
[ 1.201428] [drm] Memory usable by graphics device = 4096M
[ 1.201429] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[ 1.201430] fb: switching to inteldrmfb from EFI VGA
[ 1.201449] Console: switching to colour dummy device 80x25
[ 1.201550] [drm] Replacing VGA console driver
[ 1.207425] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.207426] [drm] Driver supports precise vblank timestamp query.
[ 1.216142] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.223677] [drm] GuC firmware load skipped
[ 1.247406] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.247719] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.247842] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 1.247877] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
[ 1.247955] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
[ 1.270508] fbcon: inteldrmfb (fb0) is primary device
[ 1.270569] Console: switching to colour frame buffer device 240x67
[ 1.270590] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.334193] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 1.477025] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[ 1.477026] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[ 1.477027] usb 1-7: Product: MSI EPF USB
[ 1.477042] usb 1-7: Manufacturer: MSI EPF USB
[ 1.477042] usb 1-7: SerialNumber: MSI EPF USB
[ 1.480846] usbcore: registered new interface driver usbhid
[ 1.480847] usbhid: USB HID core driver
[ 1.514012] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.514035] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.516741] ata3.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[ 1.517749] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.518257] ata4.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100
[ 1.518258] ata4.00: 312581808 sectors, multi 16: LBA48
[ 1.518892] ata4.00: configured for UDMA/100
[ 1.518914] ata3.00: configured for UDMA/133
[ 1.522776] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GUD0N 1.00 PQ: 0 ANSI: 5
[ 1.549801] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.549802] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.549985] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.550122] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.550541] scsi 3:0:0:0: Direct-Access ATA TOSHIBA MK1637GS 2C PQ: 0 ANSI: 5
[ 1.594193] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[ 1.602353] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.602609] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.602699] sd 3:0:0:0: [sda] Write Protect is off
[ 1.602701] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.602866] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.696660] sda: sda1 sda2 sda3
[ 1.697489] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.735438] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.735439] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.781768] random: fast init done
[ 1.854195] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[ 1.873964] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[ 1.931229] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400/0x0, board id: 1474, fw id: 793787
[ 1.968071] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 1.994492] clocksource: Switched to clocksource tsc
[ 2.024820] usb 1-11: New USB device found, idVendor=5986, idProduct=0683
[ 2.024822] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.024823] usb 1-11: Product: BisonCam, NB Pro
[ 2.024824] usb 1-11: Manufacturer: Bison
[ 2.024824] usb 1-11: SerialNumber: 200901010001
[ 2.146178] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[ 2.286753] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129
[ 2.286755] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.286756] usb 1-12: Product: USB2.0-CRW
[ 2.286757] usb 1-12: Manufacturer: Generic
[ 2.286758] usb 1-12: SerialNumber: 20100201396000000
[ 2.290327] usbcore: registered new interface driver rtsx_usb
[ 2.543530] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.858472] [drm] RC6 on
[ 3.921163] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.921274] systemd[1]: Detected architecture x86-64.
[ 3.931412] systemd[1]: Set hostname to <john-GE72-6QC>.
[ 4.262866] random: crng init done
[ 5.163261] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.163343] systemd[1]: Listening on Journal Socket.
[ 5.163366] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.163422] systemd[1]: Listening on Journal Audit Socket.
[ 5.163430] systemd[1]: Reached target Encrypted Volumes.
[ 5.163447] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.163463] systemd[1]: Listening on udev Kernel Socket.
[ 6.175734] lp: driver loaded but no devices found
[ 6.221921] ppdev: user-space parallel port driver
[ 7.634703] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 7.763987] systemd-journald[256]: Received request to flush runtime journal from PID 1
[ 8.137289] wmi: Mapper loaded
[ 9.056266] Bluetooth: Core ver 2.22
[ 9.056277] NET: Registered protocol family 31
[ 9.056277] Bluetooth: HCI device and connection manager initialized
[ 9.056279] Bluetooth: HCI socket layer initialized
[ 9.056281] Bluetooth: L2CAP socket layer initialized
[ 9.056284] Bluetooth: SCO socket layer initialized
[ 9.131381] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.138948] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.379145] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 9.732786] Bluetooth: HCI UART driver ver 2.3
[ 9.732787] Bluetooth: HCI UART protocol H4 registered
[ 9.732787] Bluetooth: HCI UART protocol BCSP registered
[ 9.732788] Bluetooth: HCI UART protocol LL registered
[ 9.732788] Bluetooth: HCI UART protocol ATH3K registered
[ 9.732789] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.732814] Bluetooth: HCI UART protocol Intel registered
[ 9.732824] Bluetooth: HCI UART protocol Broadcom registered
[ 9.732825] Bluetooth: HCI UART protocol QCA registered
[ 9.732825] Bluetooth: HCI UART protocol AG6XX registered
[ 9.732826] Bluetooth: HCI UART protocol Marvell registered
[ 9.939061] usbcore: registered new interface driver btusb
[ 9.954992] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 10.059165] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 10.291993] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 10.407501] Intel(R) Wireless WiFi driver for Linux
[ 10.407501] Copyright(c) 2003- 2015 Intel Corporation
[ 10.407536] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 10.407773] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[ 10.432401] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[ 10.441450] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[ 10.441463] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[ 10.764286] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242
[ 11.096355] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 11.096357] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 11.096357] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 11.096358] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 11.096358] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.096358] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 11.147865] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[ 11.602290] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 11.604323] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 11.604483] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 11.619144] media: Linux media interface: v0.10
[ 11.689273] Linux video capture interface: v2.00
[ 11.907152] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0683)
[ 11.909688] uvcvideo 1-11:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 11.909690] uvcvideo 1-11:1.0: Entity type for entity Extension 4 was not initialized!
[ 11.909691] uvcvideo 1-11:1.0: Entity type for entity Processing 2 was not initialized!
[ 11.909692] uvcvideo 1-11:1.0: Entity type for entity Camera 1 was not initialized!
[ 11.909752] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input9
[ 11.909792] usbcore: registered new interface driver uvcvideo
[ 11.909792] USB Video Class driver (1.1.1)
[ 12.021591] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 12.696798] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 12.696954] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.891417] AVX2 version of gcm_enc/dec engaged.
[ 12.891418] AES CTR mode by8 optimization enabled
[ 12.952979] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 12.953031] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 12.953062] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 12.953090] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 12.953116] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 12.953159] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 12.953186] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 13.075394] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x15/0x1b/0x1a/0x0/0x0) type:speaker
[ 13.075396] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.075397] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 13.075398] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 13.075399] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 13.075399] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 13.075401] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 13.075402] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 13.749777] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 14.190935] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 14.190981] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 14.191023] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 14.191063] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 14.191102] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 14.474706] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 14.757625] input: MSI WMI hotkeys as /devices/virtual/input/input15
[ 15.453072] intel_rapl: Found RAPL domain package
[ 15.453073] intel_rapl: Found RAPL domain core
[ 15.453074] intel_rapl: Found RAPL domain uncore
[ 15.453075] intel_rapl: Found RAPL domain dram
[ 15.722054] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 19.759126] Adding 8787964k swap on /dev/sda2. Priority:-1 extents:1 across:8787964k FS
[ 22.191630] audit: type=1400 audit(1508826205.645:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=760 comm="apparmor_parser"
[ 22.191631] audit: type=1400 audit(1508826205.645:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=760 comm="apparmor_parser"
[ 22.221595] audit: type=1400 audit(1508826205.673:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
[ 22.221596] audit: type=1400 audit(1508826205.673:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[ 22.221597] audit: type=1400 audit(1508826205.673:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=761 comm="apparmor_parser"
[ 22.221598] audit: type=1400 audit(1508826205.673:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[ 22.272121] audit: type=1400 audit(1508826205.725:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=766 comm="apparmor_parser"
[ 22.289282] audit: type=1400 audit(1508826205.741:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=765 comm="apparmor_parser"
[ 22.289283] audit: type=1400 audit(1508826205.741:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=765 comm="apparmor_parser"
[ 22.314470] audit: type=1400 audit(1508826205.769:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=768 comm="apparmor_parser"
[ 29.861269] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.861270] Bluetooth: BNEP filters: protocol multicast
[ 29.861272] Bluetooth: BNEP socket layer initialized
[ 30.420547] bbswitch: version 0.8
[ 30.420551] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 30.420555] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 30.420562] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 30.420629] bbswitch: detected an Optimus _DSM function
[ 30.420948] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 36.822673] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 36.824759] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 36.824923] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 36.889586] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 36.889747] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 36.900904] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 37.301901] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 37.302729] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 39.999188] kauditd_printk_skb: 13 callbacks suppressed
[ 39.999189] audit: type=1400 audit(1508826223.457:25): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1030/status" pid=1030 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=122 ouid=122
[ 39.999190] audit: type=1400 audit(1508826223.457:26): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=1030 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=122 ouid=0
[ 39.999191] audit: type=1400 audit(1508826223.457:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1030/status" pid=1030 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=122 ouid=122
[ 40.205480] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 43.796726] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 43.796781] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 43.796811] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 43.796839] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 43.796868] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 43.796911] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 43.796938] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 44.019449] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 44.138152] nvidia-modeset: Allocated GPU:0 (GPU-e122e80e-f5cc-b0b1-a542-924cd6759c49) @ PCI:0000:01:00.0
[ 44.138316] nvidia-modeset: Freed GPU:0 (GPU-e122e80e-f5cc-b0b1-a542-924cd6759c49) @ PCI:0000:01:00.0
[ 59.913777] Bluetooth: RFCOMM TTY layer initialized
[ 59.913781] Bluetooth: RFCOMM socket layer initialized
[ 59.913788] Bluetooth: RFCOMM ver 1.11
[ 1097.065138] wlp2s0: authenticate with 24:95:04:8b:9e:4c
[ 1097.070474] wlp2s0: send auth to 24:95:04:8b:9e:4c (try 1/3)
[ 1097.072507] wlp2s0: authenticated
[ 1097.074191] wlp2s0: associate with 24:95:04:8b:9e:4c (try 1/3)
[ 1097.077480] wlp2s0: RX AssocResp from 24:95:04:8b:9e:4c (capab=0x411 status=0 aid=3)
[ 1097.078331] wlp2s0: associated
[ 1097.078359] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1502.805085] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[ 1502.948505] usb 1-8: New USB device found, idVendor=046d, idProduct=c52b
[ 1502.948508] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1502.948510] usb 1-8: Product: USB Receiver
[ 1502.948512] usb 1-8: Manufacturer: Logitech
[ 1503.027641] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
[ 1503.174349] input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0004/0003:046D:404A.0005/input/input16
[ 1503.174900] logitech-hidpp-device 0003:046D:404A.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:00:14.0-8:1
[ 1503.180394] input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0004/0003:046D:404A.0006/input/input17
[ 1503.180917] logitech-hidpp-device 0003:046D:404A.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:00:14.0-8:2
[ 2047.032217] wlp2s0: deauthenticating from 24:95:04:8b:9e:4c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2048.059375] wlp2s0: authenticate with 24:95:04:8b:9e:4c
[ 2048.063169] wlp2s0: send auth to 24:95:04:8b:9e:4c (try 1/3)
[ 2048.065605] wlp2s0: authenticated
[ 2048.069215] wlp2s0: associate with 24:95:04:8b:9e:4c (try 1/3)
[ 2048.073578] wlp2s0: RX AssocResp from 24:95:04:8b:9e:4c (capab=0x411 status=0 aid=2)
[ 2048.074710] wlp2s0: associated
john@john-GE72-6QC:~$ Pour mon grub :
john@john-GE72-6QC:~$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
john@john-GE72-6QC:~$ Du coup je ne mets pas de parametre au démarrage mais je vois que dans la commande dmesg j'ai des APCI error
Hors ligne
#9 Le 24/10/2017, à 11:46
- Nuliel
Re : [Résolu]Installer ubuntu avec l'acpi
Du coup je ne mets pas de parametre au démarrage mais je vois que dans la commande dmesg j'ai des APCI error
C'était le but 
(ça me permet de faire des recherches à partir des erreurs). Le but final, c'est de réussir à éteindre le pc sans le paramètre acpi=off.
Pour les erreurs que j'ai remarqué:
https://bugs.launchpad.net/ubuntu/+sour … ug/1275985 (en reférence à query ignored acpi linux, ça dit que le bios peut supporter le paramètre noyau acpi_osi=Linux et que le noyau ne l'utilise pas)
nvidia: module verification failed: signature and/or required key missing - tainting kernel (pas grave)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95) (apparemment pas grave non plus)
Le wifi fonctionne? (j'ai vu passer deux trois trucs sur iwlwifi)
Au vu de ce qui est dans le dmesg, tu as le pilote propriétaire de chez nvidia (tu n'utilises pas le pilote libre qui s'appelle nouveau), donc parfait.
Pour les pilotes, je n'ai pas le CPU de séléctionner
Peux tu installer le pilote pour ton cpu (intel-microcode propriétaire dans pilotes additionnels) et voir si le pc s'éteint sans le paramètre acpi=off?
Sinon, tu peux essayer de démarrer avec acpi_osi=Linux à la place de acpi=off pour voir si le pc peut s'éteindre?
Hors ligne
#10 Le 24/10/2017, à 12:57
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Re.
Merci pour ton aide.
Du coup, j'ai mis les pilotes du CPU sans probleme.
Le wifi fonctionne bien.
Pour les parametres, j'ai essayer acpi_osi=Linux le pc s'éteinds mais j'ai toujours autant d'erreurs
Le pc démarre et s'éteinds bien sans aucun paramètres mais je le trouve long à démarrer.( 54s pour l'écran de login et 1min28 pour le tout).
Hors ligne
#11 Le 24/10/2017, à 13:25
- Nuliel
Re : [Résolu]Installer ubuntu avec l'acpi
Ah, s'il s'éteint correctement sans paramètres c'est parfait! J'avais compris que acpi=off était obligatoire pour arrêter l'ordi convenablement.
Peux tu dire quelles sont les erreurs? Elles n'ont peut être rien à voir avec l'acpi.
Peux tu donner le retour de
systemd-analyze blameHors ligne
#12 Le 24/10/2017, à 13:38
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Voici le retour de systemd-analyse blame
john@john-GE72-6QC:~$ systemd-analyze blame
16.487s dev-sda3.device
11.344s mysql.service
11.062s systemd-udevd.service
6.994s NetworkManager-wait-online.service
5.860s grub-common.service
5.230s snapd.service
3.906s php7.2-fpm.service
3.655s NetworkManager.service
2.962s nginx.service
1.940s keyboard-setup.service
1.461s accounts-daemon.service
1.319s dev-hugepages.mount
1.319s sys-kernel-debug.mount
1.246s dev-mqueue.mount
1.155s systemd-journald.service
1.132s avahi-daemon.service
1.080s ModemManager.service
1.055s systemd-rfkill.service
1.046s apport.service
1.023s systemd-modules-load.service
1.005s irqbalance.service
917ms lightdm.service
911ms console-setup.service
807ms thermald.service
770ms upower.service
765ms systemd-tmpfiles-setup-dev.service
733ms ufw.service
660ms networking.service
635ms setvtrgb.service
531ms gpu-manager.service
530ms systemd-user-sessions.service
529ms rsyslog.service
498ms kmod-static-nodes.service
479ms nvidia-persistenced.service
402ms plymouth-start.service
323ms colord.service
293ms phpsessionclean.service
291ms apparmor.service
273ms sys-fs-fuse-connections.mount
270ms systemd-sysctl.service
217ms polkitd.service
205ms udisks2.service
179ms wpa_supplicant.service
168ms systemd-udev-trigger.service
158ms systemd-tmpfiles-setup.service
152ms dev-sda2.swap
88ms systemd-tmpfiles-clean.service
85ms snapd.socket
83ms systemd-logind.service
82ms bluetooth.service
80ms ondemand.service
79ms plymouth-read-write.service
78ms speech-dispatcher.service
77ms snap-repair.service
67ms systemd-fsck@dev-disk-by\x2duuid-9FF7\x2d5982.service
62ms alsa-restore.service
58ms pppd-dns.service
58ms user@1000.service
41ms systemd-random-seed.service
35ms systemd-remount-fs.service
23ms systemd-update-utmp.service
21ms boot-efi.mount
7ms snapd.autoimport.service
5ms systemd-timesyncd.service
4ms ureadahead-stop.service
4ms dns-clean.service
4ms systemd-journal-flush.service
3ms systemd-update-utmp-runlevel.service
2ms rtkit-daemon.service
2ms resolvconf.service
1ms rc-local.service
1ms plymouth-quit-wait.service
1ms systemd-backlight@backlight:intel_backlight.service
john@john-GE72-6QC:~$ Hors ligne
#13 Le 24/10/2017, à 14:32
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Pour les erreurs en haut, c'est les même qu'on trouve dans le dmesg sur ACPi
Hors ligne
#14 Le 24/10/2017, à 19:19
- Nuliel
Re : [Résolu]Installer ubuntu avec l'acpi
Mais il y en a pas d'autres après ces messages sur l'acpi (genre "a job is running..."), appuie sur la flèche du bas, tu auras peut être plus de messages.
1min 28, c'est à mon avis un processus qui est tué parce qu'il refuse de s'éteindre.
Pour le temps au démarrage, tu utilises mysql ou c'était juste pour le tester? Je veux bien le retour de
systemctl status systemd-udevd.service(pas sûr de trouver quelque chose d'utile, mais ça coûte rien de regarder)
Il y a pas grand chose à faire de plus pour accélérer le démarrage
Hors ligne
#15 Le 25/10/2017, à 08:49
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Bonjour ublender.
Suite à ton message et mes recherches en parallèles, comme les erreurs sont inoffensives et que je n'éteinds quasiment jamais mon pc, j'ai décidé de faire l'installation sur le ssd et hdd.
Du coup le pc demarre, sort de veille et s'éteind parfaitement.
Il est d'ailleurs plus rapide ( grace au ssd ? d'apres dmesg 9secondes )
Pour acquis je mets le retour dmesg :
➜ ~ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xba, date = 2017-04-09
[ 0.000000] Linux version 4.10.0-37-generic (buildd@lgw01-amd64-037) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #41~16.04.1-Ubuntu SMP Fri Oct 6 22:42:59 UTC 2017 (Ubuntu 4.10.0-37.41~16.04.1-generic 4.10.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-37-generic.efi.signed root=UUID=cabb20a4-d463-4e09-9662-415e9f968f0c ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006a6dafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006a6db000-0x000000006a6dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006a6dc000-0x000000006a705fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006a706000-0x000000006a75cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006a75d000-0x000000006ac6dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ac6e000-0x00000000768b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000768b3000-0x0000000077337fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077338000-0x00000000777dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000777db000-0x0000000077b85fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077b86000-0x0000000077f81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077f82000-0x0000000077ffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000281ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x77ec8e98 ACPI=0x778df000 ACPI 2.0=0x778df000 SMBIOS=0x77ec7000 SMBIOS 3.0=0x77ec6000
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GE72 6QC/MS-1795, BIOS E1795IMS.114 04/29/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x282000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0079000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0078800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x0000000077ec8e98 to 0x0000000077ec8ed0.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff924200098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x23fa28000, 0x23fa28fff] PGTABLE
[ 0.000000] BRK [0x23fa29000, 0x23fa29fff] PGTABLE
[ 0.000000] BRK [0x23fa2a000, 0x23fa2afff] PGTABLE
[ 0.000000] BRK [0x23fa2b000, 0x23fa2bfff] PGTABLE
[ 0.000000] BRK [0x23fa2c000, 0x23fa2cfff] PGTABLE
[ 0.000000] BRK [0x23fa2d000, 0x23fa2dfff] PGTABLE
[ 0.000000] BRK [0x23fa2e000, 0x23fa2efff] PGTABLE
[ 0.000000] BRK [0x23fa2f000, 0x23fa2ffff] PGTABLE
[ 0.000000] BRK [0x23fa30000, 0x23fa30fff] PGTABLE
[ 0.000000] BRK [0x23fa31000, 0x23fa31fff] PGTABLE
[ 0.000000] BRK [0x23fa32000, 0x23fa32fff] PGTABLE
[ 0.000000] BRK [0x23fa33000, 0x23fa33fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x321b2000-0x350d0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000778DF000 000024 (v02 MSI_NB)
[ 0.000000] ACPI: XSDT 0x00000000778DF0B0 0000DC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000077903080 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000778DF220 023E5A (v02 MSI_NB MEGABOOK 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000077B85F80 000040
[ 0.000000] ACPI: APIC 0x0000000077903190 000084 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000077903218 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000077903260 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x0000000077903300 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
[ 0.000000] ACPI: MCFG 0x00000000779033C8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000077903408 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x0000000077903440 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x0000000077903758 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000779037F0 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000077903A38 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000779065E8 000CF3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x00000000779072E0 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x0000000077907318 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000077907370 00061A (v02 AMI xh_rvp11 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000077907990 005552 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x000000007790CEE8 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000007790CF30 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: BGRT 0x000000007790DD88 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007790DDC0 00009F (v02 SgRef SgPeg 00001000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x000000007790DE60 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000007790DF08 0013D0 (v01 OptRef OptTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x000000007790F2D8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000281ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x281fd5000-0x281ffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000281ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000006a6dafff]
[ 0.000000] node 0: [mem 0x000000006a706000-0x000000006a75cfff]
[ 0.000000] node 0: [mem 0x000000006ac6e000-0x00000000768b2fff]
[ 0.000000] node 0: [mem 0x0000000077338000-0x00000000777dafff]
[ 0.000000] node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000281ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000281ffffff]
[ 0.000000] On node 0 totalpages: 2066359
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7521 pages used for memmap
[ 0.000000] DMA32 zone: 481307 pages, LIFO batch:31
[ 0.000000] Normal zone: 24704 pages used for memmap
[ 0.000000] Normal zone: 1581056 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x000000007cffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6a6db000-0x6a6dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6a6dc000-0x6a705fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6a75d000-0x6ac6dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x768b3000-0x77337fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x777db000-0x77b85fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77b86000-0x77f81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77f82000-0x77ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7cffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7d000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff924481c00000 s107992 r8192 d31272 u524288
[ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2034048
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-37-generic.efi.signed root=UUID=cabb20a4-d463-4e09-9662-415e9f968f0c ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7792956K/8265436K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 472480K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:1024 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2300.000 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=9216000)
[ 0.000034] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20160930
[ 0.027774] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[ 0.027780] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[ 0.027825] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp11) while loading table (20160930/tbxfload-228)
[ 0.037190] ACPI Error: 1 table load failures, 9 successful (20160930/tbxfload-246)
[ 0.037851] Security Framework initialized
[ 0.037852] Yama: becoming mindful.
[ 0.037865] AppArmor: AppArmor initialized
[ 0.038288] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039708] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040366] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040373] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040589] CPU: Physical Processor ID: 0
[ 0.040590] CPU: Processor Core ID: 0
[ 0.040593] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040594] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.040598] mce: CPU supports 10 MCE banks
[ 0.040607] CPU0: Thermal monitoring enabled (TM1)
[ 0.040628] process: using mwait in idle threads
[ 0.040638] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.040639] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.041757] Freeing SMP alternatives memory: 32K
[ 0.048783] ftrace: allocating 34228 entries in 134 pages
[ 0.064829] smpboot: Max logical packages: 1
[ 0.064833] DMAR: Host address width 39
[ 0.064834] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.064840] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e
[ 0.064841] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.064844] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.064845] DMAR: RMRR base: 0x000000770da000 end: 0x000000770f9fff
[ 0.064846] DMAR: RMRR base: 0x00000078800000 end: 0x0000007cffffff
[ 0.064847] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.064848] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.064849] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.064849] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.066243] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.066243] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.070239] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.109929] TSC deadline timer enabled
[ 0.109934] smpboot: CPU0: Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.109975] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.110004] ... version: 4
[ 0.110004] ... bit width: 48
[ 0.110005] ... generic registers: 8
[ 0.110005] ... value mask: 0000ffffffffffff
[ 0.110006] ... max period: 00007fffffffffff
[ 0.110006] ... fixed-purpose events: 3
[ 0.110007] ... event mask: 00000007000000ff
[ 0.110800] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.110811] smp: Bringing up secondary CPUs ...
[ 0.110868] x86: Booting SMP configuration:
[ 0.110868] .... node #0, CPUs: #1 #2 #3
[ 0.116372] smp: Brought up 1 node, 4 CPUs
[ 0.116374] smpboot: Total of 4 processors activated (18432.00 BogoMIPS)
[ 0.120024] devtmpfs: initialized
[ 0.120073] x86/mm: Memory block size: 128MB
[ 0.122609] evm: security.selinux
[ 0.122609] evm: security.SMACK64
[ 0.122609] evm: security.SMACK64EXEC
[ 0.122610] evm: security.SMACK64TRANSMUTE
[ 0.122610] evm: security.SMACK64MMAP
[ 0.122611] evm: security.ima
[ 0.122611] evm: security.capability
[ 0.122663] PM: Registering ACPI NVS region [mem 0x6a6db000-0x6a6dbfff] (4096 bytes)
[ 0.122663] PM: Registering ACPI NVS region [mem 0x777db000-0x77b85fff] (3846144 bytes)
[ 0.122750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.122758] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.122792] pinctrl core: initialized pinctrl subsystem
[ 0.122947] RTC time: 6:40:18, date: 10/25/17
[ 0.124056] NET: Registered protocol family 16
[ 0.139767] cpuidle: using governor ladder
[ 0.155771] cpuidle: using governor menu
[ 0.155773] PCCT header not found.
[ 0.155806] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.155806] ACPI: bus type PCI registered
[ 0.155807] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.155861] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.155863] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.155875] PCI: Using configuration type 1 for base access
[ 0.171886] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.171887] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.172113] ACPI: Added _OSI(Module Device)
[ 0.172114] ACPI: Added _OSI(Processor Device)
[ 0.172114] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.172115] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.172118] ACPI : EC: EC started
[ 0.172118] ACPI : EC: interrupt blocked
[ 0.174167] ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[ 0.174173] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff9244790f2898), AE_NOT_FOUND (20160930/psparse-543)
[ 0.174190] ACPI: \: Used as first EC
[ 0.174191] ACPI: \: GPE=0x0, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.174192] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.175265] ACPI: Executed 24 blocks of module-level executable AML code
[ 0.190745] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.194832] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.198932] ACPI : EC: EC stopped
[ 0.198933] ACPI : EC: EC started
[ 0.198933] ACPI : EC: interrupt blocked
[ 0.200509] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.200510] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.200511] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.200512] ACPI: Interpreter enabled
[ 0.200552] ACPI: (supports S0 S3 S4 S5)
[ 0.200553] ACPI: Using IOAPIC for interrupt routing
[ 0.200591] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.202899] ACPI: Power Resource [PG00] (on)
[ 0.203646] ACPI: Power Resource [PG01] (on)
[ 0.204016] ACPI: Power Resource [PG02] (on)
[ 0.206893] ACPI: Power Resource [WRST] (off)
[ 0.207225] ACPI: Power Resource [WRST] (off)
[ 0.207553] ACPI: Power Resource [WRST] (off)
[ 0.207880] ACPI: Power Resource [WRST] (off)
[ 0.208206] ACPI: Power Resource [WRST] (off)
[ 0.208539] ACPI: Power Resource [WRST] (off)
[ 0.208869] ACPI: Power Resource [WRST] (off)
[ 0.209193] ACPI: Power Resource [WRST] (off)
[ 0.209521] ACPI: Power Resource [WRST] (off)
[ 0.209848] ACPI: Power Resource [WRST] (off)
[ 0.210177] ACPI: Power Resource [WRST] (off)
[ 0.210508] ACPI: Power Resource [WRST] (off)
[ 0.210838] ACPI: Power Resource [WRST] (off)
[ 0.211164] ACPI: Power Resource [WRST] (off)
[ 0.211489] ACPI: Power Resource [WRST] (off)
[ 0.211815] ACPI: Power Resource [WRST] (off)
[ 0.212142] ACPI: Power Resource [WRST] (off)
[ 0.212468] ACPI: Power Resource [WRST] (off)
[ 0.212798] ACPI: Power Resource [WRST] (off)
[ 0.213122] ACPI: Power Resource [WRST] (off)
[ 0.220642] ACPI: Power Resource [FN00] (off)
[ 0.220712] ACPI: Power Resource [FN01] (off)
[ 0.220780] ACPI: Power Resource [FN02] (off)
[ 0.220847] ACPI: Power Resource [FN03] (off)
[ 0.220917] ACPI: Power Resource [FN04] (off)
[ 0.221964] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.221969] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.223365] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.223366] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.223911] PCI host bridge to bus 0000:00
[ 0.223913] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.223914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.223916] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.223916] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.223917] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.223918] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.223919] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.223920] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.223921] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.223921] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.223922] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.223923] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.223924] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.223925] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.223926] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.223927] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.223927] pci_bus 0000:00: root bus resource [mem 0x7d000000-0xdfffffff window]
[ 0.223928] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
[ 0.223929] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.223931] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.223937] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[ 0.224267] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.224304] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.224432] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.224486] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[ 0.224494] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.224500] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.224504] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.224696] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.224713] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[ 0.224781] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.224893] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.224927] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.224943] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[ 0.225106] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.225120] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[ 0.225171] pci 0000:00:16.0: PME# supported from D3hot
[ 0.225317] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.225330] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[ 0.225337] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[ 0.225343] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.225350] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.225356] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.225363] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[ 0.225400] pci 0000:00:17.0: PME# supported from D3hot
[ 0.225541] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.225597] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.225722] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.225758] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.225814] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.225936] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.225986] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[ 0.226208] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.226217] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[ 0.226380] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.226399] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[ 0.226423] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[ 0.226468] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.226636] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.226673] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.226719] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[ 0.226788] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.227022] pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
[ 0.227030] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.227038] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.227045] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.227050] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.227056] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.227141] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.236638] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.236640] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.236642] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.236645] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.236746] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.236777] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[ 0.236933] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.237039] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.237074] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.237078] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.237165] pci 0000:03:00.0: [1969:e0a1] type 00 class 0x020000
[ 0.237188] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit]
[ 0.237199] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.237304] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.237377] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.237411] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.237413] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.237415] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.239835] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239881] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.239925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239971] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.240014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.240057] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.240101] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.240144] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.240535] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.240638] ACPI : EC: interrupt unblocked
[ 0.240650] ACPI : EC: event unblocked
[ 0.240661] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.240662] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.240883] SCSI subsystem initialized
[ 0.240909] libata version 3.00 loaded.
[ 0.240934] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.240935] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.240938] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.240938] vgaarb: loaded
[ 0.240953] ACPI: bus type USB registered
[ 0.240965] usbcore: registered new interface driver usbfs
[ 0.240971] usbcore: registered new interface driver hub
[ 0.240984] usbcore: registered new device driver usb
[ 0.241045] Registered efivars operations
[ 0.244824] PCI: Using ACPI for IRQ routing
[ 0.272814] PCI: pci_cache_line_size set to 64 bytes
[ 0.272868] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.272868] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.272869] e820: reserve RAM buffer [mem 0x6a6db000-0x6bffffff]
[ 0.272870] e820: reserve RAM buffer [mem 0x6a75d000-0x6bffffff]
[ 0.272871] e820: reserve RAM buffer [mem 0x768b3000-0x77ffffff]
[ 0.272872] e820: reserve RAM buffer [mem 0x777db000-0x77ffffff]
[ 0.272873] e820: reserve RAM buffer [mem 0x282000000-0x283ffffff]
[ 0.272946] NetLabel: Initializing
[ 0.272946] NetLabel: domain hash size = 128
[ 0.272947] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.272959] NetLabel: unlabeled traffic allowed by default
[ 0.273096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.273100] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.275143] clocksource: Switched to clocksource hpet
[ 0.281479] VFS: Disk quotas dquot_6.6.0
[ 0.281493] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.281570] AppArmor: AppArmor Filesystem Enabled
[ 0.281600] pnp: PnP ACPI init
[ 0.281708] pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[ 0.281744] pnp 00:01: Plug and Play ACPI device, IDs SYN1507 SYN1500 SYN0002 PNP0f13 (active)
[ 0.281864] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.281865] system 00:02: [io 0xffff] has been reserved
[ 0.281866] system 00:02: [io 0xffff] has been reserved
[ 0.281867] system 00:02: [io 0xffff] has been reserved
[ 0.281868] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.281869] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.281871] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.281957] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.281959] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.281977] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.282009] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.282010] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.282628] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.282630] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.282631] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.282632] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.282633] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.282634] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.282635] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.282636] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.282638] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.282639] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.282641] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282677] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.282678] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.282679] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.282680] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.282681] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.282682] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.282683] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.282685] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282974] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.282976] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.284067] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.284070] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.284071] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.284073] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.284901] pnp: PnP ACPI: found 10 devices
[ 0.291711] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.291729] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.291731] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.291734] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.291736] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.291739] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.291742] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.291747] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.291749] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.291752] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.291758] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.291759] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.291760] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.291761] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.291762] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.291762] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.291763] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.291764] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.291765] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.291766] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.291767] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.291768] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.291768] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.291769] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.291770] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.291771] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.291772] pci_bus 0000:00: resource 20 [mem 0x7d000000-0xdfffffff window]
[ 0.291773] pci_bus 0000:00: resource 21 [mem 0xfc000000-0xfc00ffff window]
[ 0.291774] pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
[ 0.291775] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.291775] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.291776] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.291777] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.291778] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.291779] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.291910] NET: Registered protocol family 2
[ 0.292039] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.292140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.292272] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.292292] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.292314] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.292355] NET: Registered protocol family 1
[ 0.292366] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.292628] PCI: CLS 0 bytes, default 64
[ 0.292666] Unpacking initramfs...
[ 0.991635] Freeing initrd memory: 48252K
[ 0.991660] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.991662] software IO TLB [mem 0x65831000-0x69831000] (64MB) mapped at [ffff924265831000-ffff924269830fff]
[ 0.991805] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[ 0.991896] Scanning for low memory corruption every 60 seconds
[ 0.992173] audit: initializing netlink subsys (disabled)
[ 0.992251] audit: type=2000 audit(1508913618.980:1): initialized
[ 0.992636] Initialise system trusted keyrings
[ 0.992727] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.993990] zbud: loaded
[ 0.994380] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.994556] fuse init (API version 7.26)
[ 0.996129] Key type asymmetric registered
[ 0.996129] Asymmetric key parser 'x509' registered
[ 0.996155] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.996187] io scheduler noop registered
[ 0.996188] io scheduler deadline registered
[ 0.996195] io scheduler cfq registered (default)
[ 0.996832] pcieport 0000:00:1c.0: AER enabled with IRQ 123
[ 0.996848] pcieport 0000:00:1c.3: AER enabled with IRQ 124
[ 0.996860] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[ 0.996868] pcieport 0000:00:1c.0: Signaling PME with IRQ 123
[ 0.996875] pcieport 0000:00:1c.3: Signaling PME with IRQ 124
[ 0.996912] efifb: probing for efifb
[ 0.996922] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[ 0.996923] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.996923] efifb: scrolling: redraw
[ 0.996925] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.997008] Console: switching to colour frame buffer device 240x67
[ 0.997028] fb0: EFI VGA frame buffer device
[ 0.997034] intel_idle: MWAIT substates: 0x11142120
[ 0.997035] intel_idle: v0.4.1 model 0x5E
[ 0.997234] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.997457] ACPI: AC Adapter [ADP1] (on-line)
[ 0.997706] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:01/PNP0C0D:00/input/input0
[ 0.997724] ACPI: Lid Switch [LID0]
[ 0.997762] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.997764] ACPI: Sleep Button [SLPB]
[ 0.997789] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.997791] ACPI: Power Button [PWRB]
[ 0.997818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.997819] ACPI: Power Button [PWRF]
[ 0.998676] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.999021] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.999022] ACPI: Thermal Zone [THRM] (30 C)
[ 0.999388] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.999389] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.999515] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.999515] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.999547] GHES: HEST is not enabled!
[ 0.999799] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.002187] Linux agpgart interface v0.103
[ 1.004183] loop: module loaded
[ 1.004313] libphy: Fixed MDIO Bus: probed
[ 1.004313] tun: Universal TUN/TAP device driver, 1.6
[ 1.004314] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.004342] PPP generic driver version 2.4.2
[ 1.004381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.004382] ehci-pci: EHCI PCI platform driver
[ 1.004391] ehci-platform: EHCI generic platform driver
[ 1.004401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.004403] ohci-pci: OHCI PCI platform driver
[ 1.004410] ohci-platform: OHCI generic platform driver
[ 1.004415] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.004555] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.004559] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.005643] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.005646] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.005716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.005717] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.005718] usb usb1: Product: xHCI Host Controller
[ 1.005719] usb usb1: Manufacturer: Linux 4.10.0-37-generic xhci-hcd
[ 1.005720] usb usb1: SerialNumber: 0000:00:14.0
[ 1.005809] hub 1-0:1.0: USB hub found
[ 1.005824] hub 1-0:1.0: 16 ports detected
[ 1.017980] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.017982] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.018005] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.018006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018007] usb usb2: Product: xHCI Host Controller
[ 1.018008] usb usb2: Manufacturer: Linux 4.10.0-37-generic xhci-hcd
[ 1.018008] usb usb2: SerialNumber: 0000:00:14.0
[ 1.018103] hub 2-0:1.0: USB hub found
[ 1.018112] hub 2-0:1.0: 8 ports detected
[ 1.024138] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.028219] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.028222] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.028402] mousedev: PS/2 mouse device common for all mice
[ 1.028757] rtc_cmos 00:04: RTC can wake from S4
[ 1.029142] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.029222] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.029226] i2c /dev entries driver
[ 1.029264] device-mapper: uevent: version 1.0.3
[ 1.029329] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.029331] intel_pstate: Intel P-state driver initializing
[ 1.029637] intel_pstate: HWP enabled
[ 1.029770] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.029771] EFI Variables Facility v0.08 2004-May-17
[ 1.034269] NET: Registered protocol family 10
[ 1.038036] Segment Routing with IPv6
[ 1.038049] NET: Registered protocol family 17
[ 1.038054] Key type dns_resolver registered
[ 1.038432] microcode: sig=0x506e3, pf=0x20, revision=0xba
[ 1.038569] microcode: Microcode Update Driver: v2.2.
[ 1.038755] registered taskstats version 1
[ 1.038761] Loading compiled-in X.509 certificates
[ 1.039440] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.041770] Loaded X.509 cert 'Build time autogenerated kernel key: ebb0dc598d000e9bec363d7c6e3d1e7183d2dba1'
[ 1.041785] zswap: loaded using pool lzo/zbud
[ 1.053414] Key type big_key registered
[ 1.053434] Key type trusted registered
[ 1.055563] Key type encrypted registered
[ 1.055583] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.055585] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.055600] evm: HMAC attrs: 0x1
[ 1.056349] Magic number: 5:670:671
[ 1.056570] rtc_cmos 00:04: setting system clock to 2017-10-25 06:40:19 UTC (1508913619)
[ 1.056752] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.056753] EDD information not available.
[ 1.056804] PM: Hibernation image not present or could not be loaded.
[ 1.111274] ACPI: Battery Slot [BAT1] (battery present)
[ 1.112948] Freeing unused kernel memory: 2228K
[ 1.112949] Write protecting the kernel read-only data: 14336k
[ 1.113345] Freeing unused kernel memory: 1156K
[ 1.113884] Freeing unused kernel memory: 268K
[ 1.120521] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.129707] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.129769] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.129778] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.130223] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.130237] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.131327] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.131339] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.131353] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.131376] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.131380] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.161193] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.164979] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.183049] ahci 0000:00:17.0: version 3.0
[ 1.183954] [drm] Initialized
[ 1.193479] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.193482] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.193873] nvidia: loading out-of-tree module taints kernel.
[ 1.193877] nvidia: module license 'NVIDIA' taints kernel.
[ 1.193878] Disabling lock debugging due to kernel taint
[ 1.194529] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:84:c7:d9]
[ 1.197899] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.202113] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[ 1.202276] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.202448] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.90 Tue Sep 19 19:17:35 PDT 2017 (using threaded interrupts)
[ 1.203598] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.90 Tue Sep 19 17:05:19 PDT 2017
[ 1.204140] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 1.227742] scsi host0: ahci
[ 1.227924] scsi host1: ahci
[ 1.228074] scsi host2: ahci
[ 1.228077] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 1.228161] scsi host3: ahci
[ 1.228197] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 126
[ 1.228201] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 126
[ 1.228202] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 126
[ 1.228203] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 126
[ 1.228778] [drm] Memory usable by graphics device = 4096M
[ 1.228779] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[ 1.228780] fb: switching to inteldrmfb from EFI VGA
[ 1.228800] Console: switching to colour dummy device 80x25
[ 1.228864] [drm] Replacing VGA console driver
[ 1.234706] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.234706] [drm] Driver supports precise vblank timestamp query.
[ 1.243495] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[ 1.250931] [drm] GuC firmware load skipped
[ 1.343169] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.344859] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.345162] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.345294] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 1.345328] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
[ 1.345409] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
[ 1.439557] fbcon: inteldrmfb (fb0) is primary device
[ 1.439617] Console: switching to colour frame buffer device 240x67
[ 1.439638] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.486936] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b
[ 1.486937] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.486952] usb 1-3: Product: USB Receiver
[ 1.486953] usb 1-3: Manufacturer: Logitech
[ 1.499466] usbcore: registered new interface driver usbhid
[ 1.499466] usbhid: USB HID core driver
[ 1.502934] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 1.542732] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.543051] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.543076] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.543095] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.543417] ata1.00: supports DRM functions and may not be fully accessible
[ 1.544338] ata1.00: ATA-10: Crucial_CT275MX300SSD4, M0CR021, max UDMA/133
[ 1.544339] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.544355] ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[ 1.544356] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.545220] ata1.00: supports DRM functions and may not be fully accessible
[ 1.545336] ata3.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[ 1.545762] ata4.00: configured for UDMA/133
[ 1.546690] ata1.00: configured for UDMA/133
[ 1.547243] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R021 PQ: 0 ANSI: 5
[ 1.548859] ata3.00: configured for UDMA/133
[ 1.591353] ata1.00: Enabling discard_zeroes_data
[ 1.591376] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB)
[ 1.591381] sd 0:0:0:0: [sda] Write Protect is off
[ 1.591382] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.591389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.591425] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.591587] ata1.00: Enabling discard_zeroes_data
[ 1.592966] sda: sda1 sda2
[ 1.593232] ata1.00: Enabling discard_zeroes_data
[ 1.593644] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.594783] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GUD0N 1.00 PQ: 0 ANSI: 5
[ 1.611225] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.622839] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.622841] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.622990] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.623089] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.623442] scsi 3:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[ 1.633018] input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:404A.0004/input/input9
[ 1.633306] logitech-hidpp-device 0003:046D:404A.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:00:14.0-3:1
[ 1.649012] input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:404A.0005/input/input10
[ 1.649298] logitech-hidpp-device 0003:046D:404A.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:00:14.0-3:2
[ 1.660670] random: fast init done
[ 1.679431] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.679512] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.679513] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 1.679534] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.679535] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.679654] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758029] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[ 1.758031] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[ 1.758032] usb 1-7: Product: MSI EPF USB
[ 1.758032] usb 1-7: Manufacturer: MSI EPF USB
[ 1.758033] usb 1-7: SerialNumber: MSI EPF USB
[ 1.758114] sdb: sdb1 sdb2 sdb3
[ 1.758788] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.883218] usb 1-8: new low-speed USB device number 4 using xhci_hcd
[ 1.902822] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[ 1.959586] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400/0x0, board id: 1474, fw id: 793787
[ 1.996275] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.027359] clocksource: Switched to clocksource tsc
[ 2.033067] usb 1-8: New USB device found, idVendor=046d, idProduct=c31a
[ 2.033068] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.033069] usb 1-8: Product: USB Multimedia Keyboard
[ 2.033070] usb 1-8: Manufacturer: Logitech
[ 2.042241] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C31A.0007/input/input11
[ 2.099461] hid-generic 0003:046D:C31A.0007: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:14.0-8/input0
[ 2.100443] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C31A.0008/input/input12
[ 2.159203] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[ 2.159519] hid-generic 0003:046D:C31A.0008: input,hidraw4: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:14.0-8/input1
[ 2.221313] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.309228] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.309338] systemd[1]: Detected architecture x86-64.
[ 2.309498] systemd[1]: Set hostname to <badwolf>.
[ 2.309839] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2a
[ 2.309841] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.365401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.365446] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.365474] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.365500] systemd[1]: Reached target User and Group Name Lookups.
[ 2.365566] systemd[1]: Created slice User and Session Slice.
[ 2.365613] systemd[1]: Listening on Journal Audit Socket.
[ 2.365636] systemd[1]: Listening on udev Control Socket.
[ 2.388143] lp: driver loaded but no devices found
[ 2.392388] ppdev: user-space parallel port driver
[ 2.427152] usb 1-11: new high-speed USB device number 6 using xhci_hcd
[ 2.439937] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.447429] systemd-journald[264]: Received request to flush runtime journal from PID 1
[ 2.563783] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 244
[ 2.577181] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.577244] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.577274] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.577302] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.577329] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.577372] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.577399] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 2.601435] usb 1-11: New USB device found, idVendor=5986, idProduct=0683
[ 2.601437] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.601438] usb 1-11: Product: BisonCam, NB Pro
[ 2.601439] usb 1-11: Manufacturer: Bison
[ 2.601440] usb 1-11: SerialNumber: 200901010001
[ 2.727149] usb 1-12: new high-speed USB device number 7 using xhci_hcd
[ 2.827437] [drm] RC6 on
[ 2.875414] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129
[ 2.875415] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.875416] usb 1-12: Product: USB2.0-CRW
[ 2.875417] usb 1-12: Manufacturer: Generic
[ 2.875417] usb 1-12: SerialNumber: 20100201396000000
[ 3.127868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.135262] Bluetooth: Core ver 2.22
[ 3.135271] NET: Registered protocol family 31
[ 3.135272] Bluetooth: HCI device and connection manager initialized
[ 3.135274] Bluetooth: HCI socket layer initialized
[ 3.135275] Bluetooth: L2CAP socket layer initialized
[ 3.135284] Bluetooth: SCO socket layer initialized
[ 3.135433] wmi: Mapper loaded
[ 3.146333] Bluetooth: HCI UART driver ver 2.3
[ 3.146335] Bluetooth: HCI UART protocol H4 registered
[ 3.146335] Bluetooth: HCI UART protocol BCSP registered
[ 3.146336] Bluetooth: HCI UART protocol LL registered
[ 3.146336] Bluetooth: HCI UART protocol ATH3K registered
[ 3.146337] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.146359] Bluetooth: HCI UART protocol Intel registered
[ 3.146369] Bluetooth: HCI UART protocol Broadcom registered
[ 3.146369] Bluetooth: HCI UART protocol QCA registered
[ 3.146370] Bluetooth: HCI UART protocol AG6XX registered
[ 3.146370] Bluetooth: HCI UART protocol Marvell registered
[ 3.185923] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.200892] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.206860] media: Linux media interface: v0.10
[ 3.217389] Linux video capture interface: v2.00
[ 3.218305] usbcore: registered new interface driver btusb
[ 3.233091] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 3.235290] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 3.235789] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0683)
[ 3.238455] uvcvideo 1-11:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 3.238457] uvcvideo 1-11:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.238458] uvcvideo 1-11:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.238459] uvcvideo 1-11:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.238584] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input13
[ 3.238684] usbcore: registered new interface driver uvcvideo
[ 3.238684] USB Video Class driver (1.1.1)
[ 3.280477] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 3.299713] Intel(R) Wireless WiFi driver for Linux
[ 3.299714] Copyright(c) 2003- 2015 Intel Corporation
[ 3.299749] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 3.300155] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[ 3.300167] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[ 3.300174] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[ 3.300621] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[ 3.303577] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[ 3.329458] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 3.331197] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 3.331352] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 3.367649] random: crng init done
[ 3.411573] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.492828] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 3.506235] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.571122] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 3.571123] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.571124] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.571124] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.571124] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.571125] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.585447] AVX2 version of gcm_enc/dec engaged.
[ 3.585448] AES CTR mode by8 optimization enabled
[ 3.651737] intel_rapl: Found RAPL domain package
[ 3.651738] intel_rapl: Found RAPL domain core
[ 3.651739] intel_rapl: Found RAPL domain uncore
[ 3.651740] intel_rapl: Found RAPL domain dram
[ 3.681127] input: MSI WMI hotkeys as /devices/virtual/input/input14
[ 3.702764] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.977707] Adding 8787964k swap on /dev/sdb1. Priority:-1 extents:1 across:8787964k FS
[ 4.104145] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.360174] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.385324] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x15/0x1b/0x1a/0x0/0x0) type:speaker
[ 4.385326] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.385327] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.385328] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.385329] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 4.385330] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.385331] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.385332] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.400509] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 4.400555] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 4.400601] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 4.400640] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.400680] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 4.588356] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 4.667856] audit: type=1400 audit(1508913623.106:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=795 comm="apparmor_parser"
[ 4.667857] audit: type=1400 audit(1508913623.106:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=795 comm="apparmor_parser"
[ 4.667865] audit: type=1400 audit(1508913623.106:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=795 comm="apparmor_parser"
[ 4.667866] audit: type=1400 audit(1508913623.106:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=795 comm="apparmor_parser"
[ 4.668955] audit: type=1400 audit(1508913623.106:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=794 comm="apparmor_parser"
[ 4.668956] audit: type=1400 audit(1508913623.106:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=794 comm="apparmor_parser"
[ 4.669966] audit: type=1400 audit(1508913623.106:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=799 comm="apparmor_parser"
[ 4.669968] audit: type=1400 audit(1508913623.106:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=799 comm="apparmor_parser"
[ 4.670855] audit: type=1400 audit(1508913623.106:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=800 comm="apparmor_parser"
[ 4.718547] usbcore: registered new interface driver rtsx_usb
[ 4.732181] bbswitch: version 0.8
[ 4.732186] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 4.732190] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 4.732198] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 4.732268] bbswitch: detected an Optimus _DSM function
[ 4.732273] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 4.766309] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.766310] Bluetooth: BNEP filters: protocol multicast
[ 4.766313] Bluetooth: BNEP socket layer initialized
[ 4.917140] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.919194] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.919363] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.985280] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.985440] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.004503] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.008716] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.009119] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.009899] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
[ 5.010100] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 5.089874] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.089930] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.089961] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.089988] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.090015] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.090058] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.090085] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.297764] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.306878] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.439793] nvidia-modeset: Allocated GPU:0 (GPU-e122e80e-f5cc-b0b1-a542-924cd6759c49) @ PCI:0000:01:00.0
[ 5.439920] nvidia-modeset: Freed GPU:0 (GPU-e122e80e-f5cc-b0b1-a542-924cd6759c49) @ PCI:0000:01:00.0
[ 9.602256] Bluetooth: RFCOMM TTY layer initialized
[ 9.602262] Bluetooth: RFCOMM socket layer initialized
[ 9.602265] Bluetooth: RFCOMM ver 1.11
➜ ~ Pour mysql, je m'en sert pour le developpement. Je voulais m'assurer de ne pas rencontrer de soucis à l'installation de certains packages/programmes avant l'installation définitives.
Je te mets quand meme la retour de la commande systemctl:
➜ ~ systemctl status systemd-udevd.service
● systemd-udevd.service - udev Kernel Device Manager
Loaded: loaded (/lib/systemd/system/systemd-udevd.service; static; vendor preset: enabled)
Active: active (running) since mer. 2017-10-25 08:40:20 CEST; 6min ago
Docs: man:systemd-udevd.service(8)
man:udev(7)
Main PID: 289 (systemd-udevd)
Status: "Processing..."
CGroup: /system.slice/systemd-udevd.service
└─289 /lib/systemd/systemd-udevd
oct. 25 08:40:20 badwolf systemd[1]: Starting udev Kernel Device Manager...
oct. 25 08:40:20 badwolf systemd[1]: Started udev Kernel Device Manager.
oct. 25 08:40:21 badwolf mtp-probe[346]: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11"
oct. 25 08:40:21 badwolf mtp-probe[346]: bus: 1, device: 6 was not an MTP device
oct. 25 08:40:21 badwolf mtp-probe[357]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3"
oct. 25 08:40:21 badwolf mtp-probe[357]: bus: 1, device: 2 was not an MTP device
oct. 25 08:40:21 badwolf mtp-probe[359]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8"
oct. 25 08:40:22 badwolf mtp-probe[583]: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12"
oct. 25 08:40:22 badwolf mtp-probe[583]: bus: 1, device: 7 was not an MTP device
➜ ~ Par contre, j'ai nommé mon pc BadWolf et mon user phil, mais quand je suis sur la page de log c'est BadWolf qui s'affiche au lieu de phil.
En tout cas merci pour ton aide.
Hors ligne
#16 Le 25/10/2017, à 18:38
- Nuliel
Re : [Résolu]Installer ubuntu avec l'acpi
Il est d'ailleurs plus rapide ( grace au ssd ? d'apres dmesg 9secondes )
Eh oui, un disque dur, c'est un disque qui doit se mettre en rotation puis on peut ensuite accéder aux données, le ssd, c'est direct (c'est pour ça qu'avoir un ssd permet de démarrer plus rapidement)
Edit: et les nombres qui s'affichent dans dmesg, je crois pas que ce soit des secondes. systemd-analyze est plus adapté pour savoir ça
Du coup le pc demarre, sort de veille et s'éteind parfaitement.
Parfait.
Pour acquis je mets le retour dmesg :
Je vois que le pilote propriétaire de nvidia est utilisé, donc parfait.
Par contre, j'ai nommé mon pc BadWolf et mon user phil, mais quand je suis sur la page de log c'est BadWolf qui s'affiche au lieu de phil.
Dans les paramètres (gestion d'utilisateurs), tu ne peux pas changer ça? (je précise que je suis sur xubuntu donc je sais pas ce qu'il y a dans les paramètres système)
Dernière modification par Nuliel (Le 25/10/2017, à 18:40)
Hors ligne
#17 Le 25/10/2017, à 19:44
- B_Peter
Re : [Résolu]Installer ubuntu avec l'acpi
J'ai un MSI GS73VR 7RF-214BE Stealth Pro récent , et je viens d'installer Linux Debian dessus, en non-free, aucun problème
Edit : Ubuntu est plus lent au démarrage que Debian (quelques petites secondes)
Dernière modification par B_Peter (Le 25/10/2017, à 19:48)
Linux Ubuntu 22.04.2 LTS
12th Gen Intel® Core™ i7-1260P × 16
64,0 Gio / Mesa Intel® Graphics (ADL GT2) Intel IRIS Xe
Hors ligne
#18 Le 02/11/2017, à 11:43
- philouo
Re : [Résolu]Installer ubuntu avec l'acpi
Hello à tous.
D'abord merci pour vos aides et désoler pour le retard.
Du coup, tout fonctionne à merveille.
Pour récapituler, j'ai simplement suivit le tutto cité plus haut en ajustant pour du UEFI.
Encore merci pour vos aide.
Hors ligne