Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 22/09/2017, à 17:04

DRbuntu91

[Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonjour,
J'ai enfin réussie a convaincre mon amie de me donner son vieux portable Acer Aspire 7720 pour y installer Ubuntu!
Pour cela j'ai remplacé le disque dur contenant Windows Vista par un nouveau disque SSD (donc pas de dual boot)
En utilisant UNetbootin sur mon ordi perso (Ubuntu 16.04 Unity) j'ai crée une clef LIVE-USB avec Xubuntu (j'ai choisi cette distribution par ce que cet ordi n'a que 3Go de mémoire)
J'ai déjà utilisé cette clef USB pour installer Xubuntu sur on autre vieux Acer Aspire qui lui démarre en 30 secondes alors que le démarrage sur cet Acer Aspire 7720 prend entre 1'30 et 2 minutes.
Après toutes la pub que j'ai fait concernant Ubuntu je n'ose pas lui rendre son ordi dans cet état.
J'ai bien vu plusieurs post parlant d'un soucie similaire mais aucun ne semble similaire au mien.
C'est pour cette raison que je viens a votre aide.

Voici quelques infos:

francine@Aspire-7720:~$ uname -a
Linux Aspire-7720 4.10.0-28-generic #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
francine@Aspire-7720:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.3 LTS"
francine@Aspire-7720:~$ lscpu
Architecture:          x86_64
Mode(s) opératoire(s) des processeurs :32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                2
On-line CPU(s) list:   0,1
Thread(s) par cœur : 1
Cœur(s) par socket : 2
Socket(s):             1
Nœud(s) NUMA :       1
Identifiant constructeur :GenuineIntel
Famille de processeur :6
Modèle :             15
Model name:            Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz
Révision :           13
Vitesse du processeur en MHz :1000.000
CPU max MHz:           2000,0000
CPU min MHz:           1000,0000
BogoMIPS:              3989.98
Cache L1d :           32K
Cache L1i :           32K
Cache L2 :            2048K
NUMA node0 CPU(s):     0,1
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm
francine@Aspire-7720:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system>                                 <mount point>   <type>  <options>         <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=6e3d11c3-daa9-457f-8600-9980878ba463       /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=bca198bf-d3ef-4362-b509-c004e2af5e4a       none            swap    sw                0       0

En cherchant dans le forum j'ai trouvé cette commande sudo systemd-analyze blame qui montre un démarrage en 21 secondes

Puis sur ce forum j'ai vu aussi qu'on demandait d’exécuter la commande DMESG. J'ai mis le résultat dans un fichier que j'attacherai ultérieurement (le dernier message se termine avec [  412.673344] )

J'ai également fait un boot-info que j'attacherai aussi

Quelqu'un pourrait m'aider?

Merci d'avance

Willy
EDIT: voici les infos complementaires
boot-info

dmesg

Dernière modification par DRbuntu91 (Le 23/09/2017, à 18:54)

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#2 Le 22/09/2017, à 18:00

malbo

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonjour,
Ton Boot-Info est là : 

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 21Sep2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   462,591,999   462,589,952  83 Linux
/dev/sda2         462,594,046   468,860,927     6,266,882   5 Extended
/dev/sda5         462,594,048   468,860,927     6,266,880  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        6e3d11c3-daa9-457f-8600-9980878ba463   ext4       
/dev/sda5        bca198bf-d3ef-4362-b509-c004e2af5e4a   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Sep 22 16:06 ata-HL-DT-ST_DVDRAM_GSA-T40N_K0184NH1226 -> ../../sr0
lrwxrwxrwx 1 root root  9 Sep 22 16:13 ata-KINGSTON_SUV400S37240G_50026B767402B1E3 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 22 16:13 ata-KINGSTON_SUV400S37240G_50026B767402B1E3-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 22 16:13 ata-KINGSTON_SUV400S37240G_50026B767402B1E3-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 22 16:13 ata-KINGSTON_SUV400S37240G_50026B767402B1E3-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
else
  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6e3d11c3-daa9-457f-8600-9980878ba463' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
	else
	  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
	fi
        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-35-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-6e3d11c3-daa9-457f-8600-9980878ba463' {
	menuentry 'Ubuntu, avec Linux 4.10.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-35-generic-advanced-6e3d11c3-daa9-457f-8600-9980878ba463' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
		else
		  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
		fi
		echo	'Chargement de Linux 4.10.0-35-generic…'
	        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-35-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-35-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-35-generic-init-upstart-6e3d11c3-daa9-457f-8600-9980878ba463' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
		else
		  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
		fi
		echo	'Chargement de Linux 4.10.0-35-generic…'
	        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-35-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-35-generic-recovery-6e3d11c3-daa9-457f-8600-9980878ba463' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
		else
		  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
		fi
		echo	'Chargement de Linux 4.10.0-35-generic…'
	        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-35-generic
	}
	menuentry 'Ubuntu, avec Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-6e3d11c3-daa9-457f-8600-9980878ba463' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
		else
		  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-6e3d11c3-daa9-457f-8600-9980878ba463' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
		else
		  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-6e3d11c3-daa9-457f-8600-9980878ba463' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
		else
		  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
	else
	  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6e3d11c3-daa9-457f-8600-9980878ba463
	else
	  search --no-floppy --fs-uuid --set=root 6e3d11c3-daa9-457f-8600-9980878ba463
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=6e3d11c3-daa9-457f-8600-9980878ba463 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=bca198bf-d3ef-4362-b509-c004e2af5e4a none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 108.193843842 = 116.172255232  boot/grub/grub.cfg                             1
 152.136810303 = 163.355656192  boot/grub/i386-pc/core.img                     1
   1.125053406 = 1.208016896    boot/vmlinuz-4.10.0-28-generic                 1
   3.136779785 = 3.368091648    boot/vmlinuz-4.10.0-35-generic                 1
   3.136779785 = 3.368091648    vmlinuz                                        1
   1.125053406 = 1.208016896    vmlinuz.old                                    1
   3.352535248 = 3.599757312    boot/initrd.img-4.10.0-28-generic              3
   3.461910248 = 3.717197824    boot/initrd.img-4.10.0-35-generic              3
   3.461910248 = 3.717197824    initrd.img                                     3
   3.352535248 = 3.599757312    initrd.img.old                                 3


ADDITIONAL INFORMATION :
=================== log of boot-info 20170922_1613 ===================
boot-info version : 4ppa44
boot-sav version : 4ppa44
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa44
boot-info is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-35-generic root=UUID=6e3d11c3-daa9-457f-8600-9980878ba463 ro quiet splash vt.handoff=7
Partition 2 does not start on physical sector boundary.

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="6e3d11c3-daa9-457f-8600-9980878ba463" TYPE="ext4" PARTUUID="aa716971-01"
/dev/sda5: UUID="bca198bf-d3ef-4362-b509-c004e2af5e4a" TYPE="swap" PARTUUID="aa716971-05"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 août   1 13:25 grub.d
total 80
-rwxr-xr-x 1 root root  9791 juin  21 06:11 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 juin  21 06:11 10_linux
-rwxr-xr-x 1 root root 11082 juin  21 06:11 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  21 06:11 30_os-prober
-rwxr-xr-x 1 root root  1418 juin  21 06:11 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  21 06:11 40_custom
-rwxr-xr-x 1 root root   216 juin  21 06:11 41_custom
-rw-r--r-- 1 root root   483 juin  21 06:11 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	no-docgrub,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA KINGSTON SUV400S (scsi)
Disk /dev/sda: 240GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:

Number  Start   End    Size    Type      File system     Flags
1      1049kB  237GB  237GB   primary   ext4            boot
2      237GB   240GB  3209MB  extended
5      237GB   240GB  3209MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:240GB:scsi:512:4096:msdos:ATA KINGSTON SUV400S:;
1:1049kB:237GB:237GB:ext4::boot;
2:237GB:240GB:3209MB:::;
5:237GB:240GB:3209MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sr0   rom          1024M
sda   disk        223,6G
sda2  part            1K
sda5  part swap       3G
sda1  part ext4   220,6G

KNAME ROTA RO RM STATE   MOUNTPOINT
sr0      1  0  1 running
sda      0  0  0 running
sda2     0  0  0
sda5     0  0  0         [SWAP]
sda1     0  0  0         /


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1511980k,nr_inodes=377995,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=306872k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12526)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=306872k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm lirc0 log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
Partition 2 does not start on physical sector boundary.

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.5G     0  1.5G   0% /dev
tmpfs          tmpfs     300M  5.0M  295M   2% /run
/dev/sda1      ext4      217G  4.4G  202G   3% /
tmpfs          tmpfs     1.5G   33M  1.5G   3% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.5G     0  1.5G   0% /sys/fs/cgroup
tmpfs          tmpfs     300M   36K  300M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xaa716971

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 462591999 462589952 220.6G 83 Linux
/dev/sda2       462594046 468860927   6266882     3G  5 Extended
/dev/sda5       462594048 468860927   6266880     3G 82 Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Tu n'as pas pris le bon ISO pour faire ton support d'installation : il fallait prendre Xubuntu 16.04.1 64 bits (téléchargeable ici) alors que tu as utilisé Xubuntu 16.04.3 64 bits qui est adapté aux ordis ultra-modernes (ce qui n'est pas le cas du Acer Aspire 7720 hein?). Après, ce n'est sans doute pas suffisant pour régler ton problème mais je te le signale quand même au passage.

Hors ligne

#3 Le 22/09/2017, à 22:46

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonjour Malbo
D'abord merci pour avoir pris le temps de regarder mon problème.
Effectivement j'avais vu que le noyau entre mon Ubuntu-Unity et celui de Xubuntu n’était pas le même (pour mon Ubuntu perso j'étais parti d'une clef avec 16.04.1 que j'avais acheté ensemble avec mon ordi)
Mais je me disais qu'en prenant une 16.04.3 pour Xubuntu ça ne pouvait qu’être mieux!
Je vais réessayer ce WE et te tiens au courant
Encore merci
Willy

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#4 Le 23/09/2017, à 00:03

??

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonsoir
Dans le dmesg, j'ai vu beaucoup de répétition de cette séquence qui semble coûter 10 secondes

[drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:34:pipe B] flip_done timed out

Peux-tu indiquer quelle est la carte graphique du micro

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#5 Le 23/09/2017, à 12:13

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonjour ??
J'ai fait la commande LSHW que j'ai mis ci-dessous
LSHW

D’après ce que je comprend il s'agirait de

description: VGA compatible controller
produit: Mobile GM965/GL960 Integrated Graphics Controller (primary)
fabriquant: Intel Corporation

Pour être tout a fait honnête quand j'ai vu sur l'étiquette de l'ordi "Intel Graphic Media" je me suis dit que ce devrait etre OK pour le dernier noyau. J'ai vu des erreurs similaires sur des forum US mais il sont très vieux. C'est a ce moment que je me suis dit qu'il fallait mieux consulter le forum (je ne suis pas assez calé en informatique pour continuer seul)

malbo a écrit :

ce qui n'est pas le cas du Acer Aspire 7720 hein?

C'est vrai que cet ordi a déjà 9 ans mais c'est une belle machine avec écran 17" et j'ai a cœur de lui rendre un nouvelle vie (et par la même de convertir mon amie a Ubuntu...). Je compte même changer plus tard une barrette mémoire pour passer a 4Go afin qu'il marche nickel!

Encore merci a tous les deux pour votre aide

Willy

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#6 Le 23/09/2017, à 13:02

??

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonjour
En recherchant sur internet, je n'ai pas trouvé exactement ton contexte, Mais dans un qui y ressemble  ( https://bugs.launchpad.net/ubuntu/+sour … ug/1685442 ), le conseil était de ne pas utiliser la version  16.04.3 mais la version 16.04.1
Cela ne me surprend pas tellement vu que ubuntu est partisan de l'obsolescence programmée (pas de bios EFI en 32 bits) et plus tard certainement pas d'OS en 32 bits.... pour suivre la trace de IOS11

Je te propose d'installer la version 16.04.1 qui a exactement la même durée de vie et les même fonctionnalités et voir ce que cela donne. Fais de préférence en dual-boot (il suffit de 30 Go d'espace disponible).
Tu peux le trouver ici http://cdimage.ubuntu.com/xubuntu/relea … 1/release/
Comme je pense que, ayant 3 Go de RAM, tu vas utiliser la version 32 bits, cela sera l'un de ces deux fichiers
              http://cdimage.ubuntu.com/xubuntu/relea … so.torrent
             http://cdimage.ubuntu.com/xubuntu/relea … p-i386.iso
Sinon, Malbo t'a donné le lien pour la version 64 bits.
.

Dernière modification par ?? (Le 23/09/2017, à 13:06)

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#7 Le 23/09/2017, à 18:52

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Merci a tous les deux - problème résolu en installant Xubuntu 16.04.1 (puis une mise a jour derrière pour être a jour)
Je continue mes tests.

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#8 Le 23/09/2017, à 22:39

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonjour
Après avoir augmenté la mémoire a 4Go je me suis rendu compte que ça ne changeait pas vraiment les performances.
Au contraire je me suis rendu compte lors de mes tests (regarder un replay ou le direct sur Arte) que FF prenait seulement 20% de mémoire mais entre 50 et 70% de CPU. En plus j'ai eu pls. interruptions et un gel complet de l'ordi.  Après qq. recherches sur ce forum j'ai fait la modification suivante:
mini_883984Capturedcran20170923221634.png

Je continue mes tests!

Dernière modification par DRbuntu91 (Le 24/09/2017, à 10:13)

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#9 Le 23/09/2017, à 22:51

??

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

https://doc.ubuntu-fr.org/swap a écrit :

echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf

echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.conf

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#10 Le 23/09/2017, à 23:38

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonsoir
Tout d'abord encore un grand merci pour ton aide.
Je suis allé regardé la section "swap" de la documentation pour un peu mieux comprendre.
Dans la section que tu donne en référence, il y a écrit "Régler le déclenchement du swap dès que la mémoire est utilisée a 95%"
Or lors de mes tests j'ai surveillé CPU et mémoire pendant 1 heure et je ne consomme jamais plus que 20% de mémoire.
Dès lors je ne comprends pas bien comment cette modification de swap va améliorer les performances (en particulier la consommation CPU de FF qui me semble très élevé).
Voici ce que j'obtiens actuellement (cad. sans la modif. que tu as suggeré)

francine@Aspire-7720:~$ sudo swapon --show
[sudo] Mot de passe de francine : 
NAME      TYPE      SIZE USED PRIO
/dev/sda5 partition   3G   0B   -1

Que conseilles-tu?

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#11 Le 24/09/2017, à 05:25

moko138

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

DRbuntu91 a écrit :

Que conseilles-tu?

?? te l'a dit, son conseil sur le swappiness ! Conseil dont je te confirme la validité.
  - -

Merci de donner le retour de 

uname -mr

  - -

Ta capture au message #8 est partiellement illisible mais vu cet extrait de lshw

*-display:0
             description: VGA compatible controller
             produit: Mobile GM965/GL960 Integrated Graphics Controller (primary)
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 03
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:29 mémoire:d4000000-d40fffff mémoire:c0000000-cfffffff portE/S:5110(taille=8) mémoire:c0000-dffff
        *-display:1 NON-RÉCLAMÉ
             description: Display controller
             produit: Mobile GM965/GL960 Integrated Graphics Controller (secondary)
             fabriquant: Intel Corporation
             identifiant matériel: 2.1

je te conseille

sudo apt-get update && sudo apt-get install intel-microcode

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#12 Le 24/09/2017, à 09:55

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Merci Moko138
J'avais vu ce message "NON-RECLAMÉ" mais honnêtement je n'ai pas compris le pourquoi
J'ai exécuté la commande que tu suggères mais intel-microcode semble déjà être a jour

francine@Aspire-7720:~$ sudo apt-get update && sudo apt-get install intel-microcode
Atteint:1 http://security.ubuntu.com/ubuntu xenial-security InRelease
Atteint:2 http://fr.archive.ubuntu.com/ubuntu xenial InRelease
Atteint:3 http://fr.archive.ubuntu.com/ubuntu xenial-updates InRelease
Atteint:4 http://fr.archive.ubuntu.com/ubuntu xenial-backports InRelease
Lecture des listes de paquets... Fait                         
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
intel-microcode is already the newest version (3.20170707.1~ubuntu16.04.0).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

Puis voici le retour de la commande

francine@Aspire-7720:~$ uname -mr
4.4.0-96-generic x86_64

Concernant l'image dans mon post #8 je n'ai pas l'habitude de poster des images - je vais le corriger plus tard (j'ai une copie sur mon ordi)
Mais en gros dans "Logiciels & Mise a Jour", onglet "Pilotes additionnels" j"ai un périphérique "Inconnu Inconnu" avec 2 options
1) utiliser le micro-code de Intel
2) ne pas utiliser
J'ai sélectionné l'option 1 (s'était 2) puis maintenant ca a l'air de bien marcher mais je dois continuer mes tests un peu plus longtemps (en tout cas depuis hier soir je n'ai plus eu des gels)

Encore un grand merci

Willy

Dernière modification par DRbuntu91 (Le 24/09/2017, à 10:14)

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#13 Le 24/09/2017, à 10:44

moko138

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

OK, montre 

sudo lshw -c display

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#14 Le 24/09/2017, à 11:29

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Ça donne ceci

francine@Aspire-7720:~$ sudo lshw -c display
  *-display:0             
       description: VGA compatible controller
       produit: Mobile GM965/GL960 Integrated Graphics Controller (primary)
       fabriquant: Intel Corporation
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       version: 03
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       ressources: irq:28 mémoire:d4000000-d40fffff mémoire:c0000000-cfffffff portE/S:5110(taille=8)
  *-display:1 NON-RÉCLAMÉ
       description: Display controller
       produit: Mobile GM965/GL960 Integrated Graphics Controller (secondary)
       fabriquant: Intel Corporation
       identifiant matériel: 2.1
       information bus: pci@0000:00:02.1
       version: 03
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm bus_master cap_list
       configuration: latency=0
       ressources: mémoire:d8500000-d85fffff

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#15 Le 24/09/2017, à 12:17

moko138

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Zut, le "*-display:1 NON-RÉCLAMÉ" est toujours là !

Si tu n'as pas redémarré depuis hier soir,
fais-le et redonne le retour de la même commande.


Si tu as redémarré depuis hier soir,
l'examen des logs nous en dira plus. Lance :

cd; cat /var/log/Xorg.0.log > graph20170924.txt

Puis copie ici - entre balises code ! - le contenu du fichier graph20170924.txt

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#16 Le 24/09/2017, à 17:23

DRbuntu91

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

Bonjour Moko138
J'avais déja redémaré depuis hier soir mais dans le doute je l'ai refait maintenant et le display non-reclamé est tj. la.

Du coup voici le contenu du fichier

[     5.380] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     5.380] X Protocol Version 11, Revision 0
[     5.380] Build Operating System: Linux 4.4.0-89-generic x86_64 Ubuntu
[     5.380] Current Operating System: Linux Aspire-7720 4.4.0-96-generic #119-Ubuntu SMP Tue Sep 12 14:59:54 UTC 2017 x86_64
[     5.380] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=1cb7463c-fc86-4b2b-bd16-aaa62b5130af ro quiet splash vt.handoff=7
[     5.380] Build Date: 09 August 2017  09:38:57PM
[     5.380] xorg-server 2:1.18.4-0ubuntu0.4 (For technical support please see http://www.ubuntu.com/support) 
[     5.380] Current version of pixman: 0.33.6
[     5.380] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.380] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.380] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 24 17:08:20 2017
[     5.380] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.381] (==) No Layout section.  Using the first Screen section.
[     5.381] (==) No screen section available. Using defaults.
[     5.381] (**) |-->Screen "Default Screen Section" (0)
[     5.381] (**) |   |-->Monitor "<default monitor>"
[     5.382] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.382] (==) Automatically adding devices
[     5.382] (==) Automatically enabling devices
[     5.382] (==) Automatically adding GPU devices
[     5.382] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.382] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.382] 	Entry deleted from font path.
[     5.382] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     5.382] 	Entry deleted from font path.
[     5.382] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     5.382] 	Entry deleted from font path.
[     5.382] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     5.382] 	Entry deleted from font path.
[     5.382] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     5.382] 	Entry deleted from font path.
[     5.382] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     5.382] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     5.382] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.382] (II) Loader magic: 0x5566a5823dc0
[     5.382] (II) Module ABI versions:
[     5.382] 	X.Org ANSI C Emulation: 0.4
[     5.382] 	X.Org Video Driver: 20.0
[     5.382] 	X.Org XInput driver : 22.1
[     5.382] 	X.Org Server Extension : 9.0
[     5.383] (++) using VT number 7

[     5.383] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.384] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.387] (--) PCI:*(0:0:2:0) 8086:2a02:1025:011e rev 3, Mem @ 0xd4000000/1048576, 0xc0000000/268435456, I/O @ 0x00005110/8
[     5.387] (--) PCI: (0:0:2:1) 8086:2a03:1025:011e rev 3, Mem @ 0xd8500000/1048576
[     5.387] (II) LoadModule: "glx"
[     5.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.400] (II) Module glx: vendor="X.Org Foundation"
[     5.400] 	compiled for 1.18.4, module version = 1.0.0
[     5.400] 	ABI class: X.Org Server Extension, version 9.0
[     5.400] (==) AIGLX enabled
[     5.400] (==) Matched intel as autoconfigured driver 0
[     5.400] (==) Matched intel as autoconfigured driver 1
[     5.400] (==) Matched modesetting as autoconfigured driver 2
[     5.400] (==) Matched fbdev as autoconfigured driver 3
[     5.400] (==) Matched vesa as autoconfigured driver 4
[     5.400] (==) Assigned the driver to the xf86ConfigLayout
[     5.400] (II) LoadModule: "intel"
[     5.400] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.402] (II) Module intel: vendor="X.Org Foundation"
[     5.402] 	compiled for 1.18.4, module version = 2.99.917
[     5.402] 	Module class: X.Org Video Driver
[     5.402] 	ABI class: X.Org Video Driver, version 20.0
[     5.402] (II) LoadModule: "modesetting"
[     5.403] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.403] (II) Module modesetting: vendor="X.Org Foundation"
[     5.403] 	compiled for 1.18.4, module version = 1.18.4
[     5.403] 	Module class: X.Org Video Driver
[     5.403] 	ABI class: X.Org Video Driver, version 20.0
[     5.403] (II) LoadModule: "fbdev"
[     5.403] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.403] (II) Module fbdev: vendor="X.Org Foundation"
[     5.403] 	compiled for 1.18.1, module version = 0.4.4
[     5.403] 	Module class: X.Org Video Driver
[     5.403] 	ABI class: X.Org Video Driver, version 20.0
[     5.403] (II) LoadModule: "vesa"
[     5.403] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.403] (II) Module vesa: vendor="X.Org Foundation"
[     5.403] 	compiled for 1.18.1, module version = 2.3.4
[     5.403] 	Module class: X.Org Video Driver
[     5.403] 	ABI class: X.Org Video Driver, version 20.0
[     5.403] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.404] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     5.404] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     5.404] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     5.404] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.404] (II) FBDEV: driver for framebuffer: fbdev
[     5.404] (II) VESA: driver for VESA chipsets: vesa
[     5.405] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[     5.405] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[     5.405] (II) intel(0): SNA compiled for use with valgrind
[     5.406] (WW) Falling back to old probe method for modesetting
[     5.406] (WW) Falling back to old probe method for fbdev
[     5.406] (II) Loading sub module "fbdevhw"
[     5.406] (II) LoadModule: "fbdevhw"
[     5.406] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.406] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.406] 	compiled for 1.18.4, module version = 0.0.2
[     5.406] 	ABI class: X.Org Video Driver, version 20.0
[     5.406] (WW) Falling back to old probe method for vesa
[     5.407] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[     5.407] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 2 threads
[     5.407] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.407] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.407] (==) intel(0): RGB weight 888
[     5.407] (==) intel(0): Default visual is TrueColor
[     5.408] (II) intel(0): Output LVDS1 has no monitor section
[     5.420] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[     5.420] (II) intel(0): Enabled output LVDS1
[     5.420] (II) intel(0): Output VGA1 has no monitor section
[     5.420] (II) intel(0): Enabled output VGA1
[     5.420] (II) intel(0): Output TV1 has no monitor section
[     5.420] (II) intel(0): Enabled output TV1
[     5.420] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     5.420] (II) intel(0): Output VIRTUAL1 has no monitor section
[     5.420] (II) intel(0): Enabled output VIRTUAL1
[     5.420] (--) intel(0): Output LVDS1 using initial mode 1440x900 on pipe 1
[     5.420] (==) intel(0): TearFree disabled
[     5.420] (==) intel(0): DPI set to (96, 96)
[     5.420] (II) Loading sub module "dri2"
[     5.420] (II) LoadModule: "dri2"
[     5.420] (II) Module "dri2" already built-in
[     5.420] (II) Loading sub module "present"
[     5.420] (II) LoadModule: "present"
[     5.420] (II) Module "present" already built-in
[     5.422] (II) UnloadModule: "modesetting"
[     5.422] (II) Unloading modesetting
[     5.422] (II) UnloadModule: "fbdev"
[     5.422] (II) Unloading fbdev
[     5.422] (II) UnloadSubModule: "fbdevhw"
[     5.422] (II) Unloading fbdevhw
[     5.422] (II) UnloadModule: "vesa"
[     5.422] (II) Unloading vesa
[     5.422] (==) Depth 24 pixmap format is 32 bpp
[     5.427] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[     5.427] (==) intel(0): Backing store enabled
[     5.427] (==) intel(0): Silken mouse enabled
[     5.428] (II) intel(0): HW Cursor enabled
[     5.428] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     5.428] (==) intel(0): DPMS enabled
[     5.429] (==) intel(0): Display hotplug detection enabled
[     5.429] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[     5.429] (II) intel(0): [DRI2] Setup complete
[     5.429] (II) intel(0): [DRI2]   DRI driver: i965
[     5.429] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     5.429] (II) intel(0): direct rendering: DRI2 enabled
[     5.429] (II) intel(0): hardware support for Present enabled
[     5.429] (--) RandR disabled
[     5.438] (II) SELinux: Disabled on system
[     5.462] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     5.462] (II) AIGLX: enabled GLX_ARB_create_context
[     5.462] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     5.462] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     5.462] (II) AIGLX: enabled GLX_INTEL_swap_event
[     5.462] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     5.462] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     5.462] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     5.462] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     5.462] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     5.462] (II) AIGLX: Loaded and initialized i965
[     5.462] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.472] (II) intel(0): switch to mode 1440x900@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[     5.472] (II) intel(0): Setting screen physical size to 381 x 238
[     5.531] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     5.531] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.531] (II) LoadModule: "evdev"
[     5.531] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     5.533] (II) Module evdev: vendor="X.Org Foundation"
[     5.533] 	compiled for 1.18.1, module version = 2.10.1
[     5.533] 	Module class: X.Org XInput Driver
[     5.533] 	ABI class: X.Org XInput driver, version 22.1
[     5.533] (II) Using input driver 'evdev' for 'Power Button'
[     5.533] (**) Power Button: always reports core events
[     5.533] (**) evdev: Power Button: Device: "/dev/input/event3"
[     5.534] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.534] (--) evdev: Power Button: Found keys
[     5.534] (II) evdev: Power Button: Configuring as keyboard
[     5.534] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     5.534] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.534] (**) Option "xkb_rules" "evdev"
[     5.534] (**) Option "xkb_model" "pc105"
[     5.534] (**) Option "xkb_layout" "fr"
[     5.563] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     5.563] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     5.563] (II) Using input driver 'evdev' for 'Video Bus'
[     5.563] (**) Video Bus: always reports core events
[     5.563] (**) evdev: Video Bus: Device: "/dev/input/event5"
[     5.563] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     5.563] (--) evdev: Video Bus: Found keys
[     5.563] (II) evdev: Video Bus: Configuring as keyboard
[     5.563] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7/event5"
[     5.563] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.563] (**) Option "xkb_rules" "evdev"
[     5.563] (**) Option "xkb_model" "pc105"
[     5.563] (**) Option "xkb_layout" "fr"
[     5.564] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     5.564] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.564] (II) Using input driver 'evdev' for 'Power Button'
[     5.564] (**) Power Button: always reports core events
[     5.564] (**) evdev: Power Button: Device: "/dev/input/event0"
[     5.564] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.564] (--) evdev: Power Button: Found keys
[     5.564] (II) evdev: Power Button: Configuring as keyboard
[     5.564] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[     5.564] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     5.564] (**) Option "xkb_rules" "evdev"
[     5.564] (**) Option "xkb_model" "pc105"
[     5.564] (**) Option "xkb_layout" "fr"
[     5.565] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     5.565] (II) No input driver specified, ignoring this device.
[     5.565] (II) This device may have been added with another device file.
[     5.566] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     5.566] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     5.566] (II) Using input driver 'evdev' for 'Sleep Button'
[     5.566] (**) Sleep Button: always reports core events
[     5.566] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[     5.566] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     5.566] (--) evdev: Sleep Button: Found keys
[     5.566] (II) evdev: Sleep Button: Configuring as keyboard
[     5.566] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2/event2"
[     5.566] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     5.566] (**) Option "xkb_rules" "evdev"
[     5.566] (**) Option "xkb_model" "pc105"
[     5.566] (**) Option "xkb_layout" "fr"
[     5.567] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[     5.567] (II) No input driver specified, ignoring this device.
[     5.567] (II) This device may have been added with another device file.
[     5.567] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11)
[     5.568] (II) No input driver specified, ignoring this device.
[     5.568] (II) This device may have been added with another device file.
[     5.568] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event12)
[     5.568] (II) No input driver specified, ignoring this device.
[     5.568] (II) This device may have been added with another device file.
[     5.569] (II) config/udev: Adding input device Acer Crystal Eye webcam  (/dev/input/event9)
[     5.569] (**) Acer Crystal Eye webcam : Applying InputClass "evdev keyboard catchall"
[     5.569] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam '
[     5.569] (**) Acer Crystal Eye webcam : always reports core events
[     5.569] (**) evdev: Acer Crystal Eye webcam : Device: "/dev/input/event9"
[     5.569] (--) evdev: Acer Crystal Eye webcam : Vendor 0x5986 Product 0x102
[     5.569] (--) evdev: Acer Crystal Eye webcam : Found keys
[     5.569] (II) evdev: Acer Crystal Eye webcam : Configuring as keyboard
[     5.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10/event9"
[     5.569] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam " (type: KEYBOARD, id 10)
[     5.569] (**) Option "xkb_rules" "evdev"
[     5.569] (**) Option "xkb_model" "pc105"
[     5.569] (**) Option "xkb_layout" "fr"
[     5.570] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     5.570] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     5.570] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     5.570] (**) AT Translated Set 2 keyboard: always reports core events
[     5.570] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[     5.570] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     5.570] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     5.570] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     5.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     5.570] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     5.570] (**) Option "xkb_rules" "evdev"
[     5.570] (**) Option "xkb_model" "pc105"
[     5.570] (**) Option "xkb_layout" "fr"
[     5.571] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[     5.571] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[     5.571] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[     5.571] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[     5.571] (II) LoadModule: "synaptics"
[     5.571] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     5.571] (II) Module synaptics: vendor="X.Org Foundation"
[     5.571] 	compiled for 1.18.1, module version = 1.8.2
[     5.571] 	Module class: X.Org XInput Driver
[     5.571] 	ABI class: X.Org XInput driver, version 22.1
[     5.571] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[     5.571] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[     5.571] (**) Option "Device" "/dev/input/event6"
[     5.620] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[     5.620] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[     5.620] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[     5.620] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[     5.620] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right scroll-buttons
[     5.620] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[     5.620] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[     5.620] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[     5.620] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[     5.668] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[     5.668] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 12)
[     5.668] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[     5.668] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[     5.668] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[     5.669] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[     5.669] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[     5.669] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[     5.669] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[     5.669] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[     5.669] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse0)
[     5.669] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[     5.672] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ene_ir) (/dev/input/event8)
[     5.672] (**) MCE IR Keyboard/Mouse (ene_ir): Applying InputClass "evdev pointer catchall"
[     5.672] (**) MCE IR Keyboard/Mouse (ene_ir): Applying InputClass "evdev keyboard catchall"
[     5.672] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ene_ir)'
[     5.673] (**) MCE IR Keyboard/Mouse (ene_ir): always reports core events
[     5.673] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): Device: "/dev/input/event8"
[     5.673] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Vendor 0 Product 0
[     5.673] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found 3 mouse buttons
[     5.673] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found relative axes
[     5.673] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found x and y relative axes
[     5.673] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found keys
[     5.673] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): Configuring as mouse
[     5.673] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): Configuring as keyboard
[     5.673] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): YAxisMapping: buttons 4 and 5
[     5.673] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     5.673] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8"
[     5.673] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (ene_ir)" (type: KEYBOARD, id 13)
[     5.673] (**) Option "xkb_rules" "evdev"
[     5.673] (**) Option "xkb_model" "pc105"
[     5.673] (**) Option "xkb_layout" "fr"
[     5.673] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): initialized for relative axes.
[     5.673] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) keeping acceleration scheme 1
[     5.673] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration profile 0
[     5.673] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration factor: 2.000
[     5.673] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration threshold: 4
[     5.674] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ene_ir) (/dev/input/mouse1)
[     5.674] (II) No input driver specified, ignoring this device.
[     5.674] (II) This device may have been added with another device file.
[     5.674] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event7)
[     5.674] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[     5.674] (II) Using input driver 'evdev' for 'ENE eHome Infrared Remote Receiver'
[     5.675] (**) ENE eHome Infrared Remote Receiver: always reports core events
[     5.675] (**) evdev: ENE eHome Infrared Remote Receiver: Device: "/dev/input/event7"
[     5.675] (--) evdev: ENE eHome Infrared Remote Receiver: Vendor 0 Product 0
[     5.675] (--) evdev: ENE eHome Infrared Remote Receiver: Found keys
[     5.675] (II) evdev: ENE eHome Infrared Remote Receiver: Configuring as keyboard
[     5.675] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input8/event7"
[     5.675] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD, id 14)
[     5.675] (**) Option "xkb_rules" "evdev"
[     5.675] (**) Option "xkb_model" "pc105"
[     5.675] (**) Option "xkb_layout" "fr"
[     7.422] (II) intel(0): EDID vendor "LPL", prod id 40962
[     7.422] (II) intel(0): Printing DDC gathered Modelines:
[     7.422] (II) intel(0): Modeline "1440x900"x0.0   88.75  1440 1520 1552 1600  900 917 923 926 -hsync -vsync (55.5 kHz eP)

Encore merci pour ton aide

Willy

Portable CLEVO W55SU1, Intel i5-4200M, RAM=8Go, DD=500Go mSATA, BIOS 4.6.5 AMI, Ubuntu 16.04 LTS a jour
Puis pour bidouiller un vieux portable Dell Precision M4600 avec W10 + DEBIAN-Buster
Utilisateur Ubuntu depuis Janvier 2017

Hors ligne

#17 Le 24/09/2017, à 17:37

moko138

Re : [Resolu] Démarrage Xubuntu 16.04.3 LTS très lent

OK,
j'en extrais les lignes contenant le mot driver :

[     5.382] 	X.Org XInput driver : 22.1
[     5.400] (==) Matched intel as autoconfigured driver 0
[     5.400] (==) Matched intel as autoconfigured driver 1
[     5.400] (==) Matched modesetting as autoconfigured driver 2
[     5.400] (==) Matched fbdev as autoconfigured driver 3
[     5.400] (==) Matched vesa as autoconfigured driver 4
[     5.400] (==) Assigned the driver to the xf86ConfigLayout
[     5.400] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.403] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.403] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.403] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.404] (II) FBDEV: driver for framebuffer: fbdev
[     5.404] (II) VESA: driver for VESA chipsets: vesa
[     5.405] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[     5.429] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[     5.429] (II) intel(0): [DRI2]   DRI driver: i965
[     5.429] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     5.533] 	ABI class: X.Org XInput driver, version 22.1
[     5.533] (II) Using input driver 'evdev' for 'Power Button'
[     5.563] (II) Using input driver 'evdev' for 'Video Bus'
[     5.564] (II) Using input driver 'evdev' for 'Power Button'
[     5.565] (II) No input driver specified, ignoring this device.
[     5.566] (II) Using input driver 'evdev' for 'Sleep Button'
[     5.567] (II) No input driver specified, ignoring this device.
[     5.568] (II) No input driver specified, ignoring this device.
[     5.568] (II) No input driver specified, ignoring this device.
[     5.569] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam '
[     5.570] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     5.571] 	ABI class: X.Org XInput driver, version 22.1
[     5.571] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[     5.672] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ene_ir)'
[     5.674] (II) No input driver specified, ignoring this device.
[     5.674] (II) Using input driver 'evdev' for 'ENE eHome Infrared Remote Receiver'

Et, comme les problèmes graphiques ne sont pas de mon ressort, j'invite les spécialistes à intervenir !  smile

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

Pages : 1