Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/09/2017, à 23:47

bibibel

Lenteur après passage de la 12.04 à la 14.04

Salut à tous,

Une amie me confie son portable Acer Travelmate 5730 (Equipé d'un vista, et de Edubuntu 12.04 LTS) après un démarrage impossible, suite à une erreur :
error: file not found
grub rescue>

Je télécharge une 16.04.3, et en live j'installe boot-repair qui me redonne accès au bureau. J'en profite pour faire les mise à jour recommandée, et tout se passe bien. Il me propose aussi la mise à niveau vers la 14.04 LTS, ce que je fais.
Juste un soucis à l'arrivée sur le bureau, un message d'erreur :

824402error.jpg

Problème apparemment résolu après redémarrage, plus de message.

Mon soucis est du à la lenteur, le temps avant d'arriver sur le bureau (+ de 2 minutes), j'ai beau activer la connexion automatique, il me demande toujours le mot de passe, sauf s'il s'agit d'un redémarrage. Avant l'arrivée sur le bureau il y a bien fugitivement 2 lignes d’erreurs qui apparaissent, j'ai capturé l'une d'elle ...

140894P1040017.jpg

Le boot-info me suggère bien des améliorations en fin de page, mais est-ce utile, recommandé, et surtout comment les appliquer ?
http://paste.ubuntu.com/25509073/

Merci déjà de votre soutien !

Hors ligne

#2 Le 11/09/2017, à 06:19

moko138

Re : Lenteur après passage de la 12.04 à la 14.04

Voici ton boot-info :

Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7/2008: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /boot/bcd

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows Vista
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.5 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1               2,048    20,482,047    20,480,000  27 Hidden NTFS (Recovery Environment)
/dev/sda2    *     20,482,048   166,539,263   146,057,216   7 NTFS / exFAT / HPFS
/dev/sda3         166,539,264   214,943,053    48,403,790   7 NTFS / exFAT / HPFS
/dev/sda4         214,943,742   312,580,095    97,636,354   5 Extended
/dev/sda5         214,943,744   308,535,295    93,591,552  83 Linux
/dev/sda6         308,537,344   312,580,095     4,042,752  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        EAEE-EB49                              vfat       PQSERVICE
/dev/sda2        9E224F27224F03AD                       ntfs       Acer
/dev/sda3        C2EE3E9FEE3E8C23                       ntfs       DATA
/dev/sda5        c3039921-b671-4542-814d-7f9c9f498f68   ext4       
/dev/sda6        7defa292-1f49-4090-975e-47e76c38e1f6   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Sep 10 19:54 ata-HL-DT-ST_DVDRAM_GSA-T50N_K01886J5859 -> ../../sr0
lrwxrwxrwx 1 root root  9 Sep 10 21:16 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 10 19:55 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 10 21:16 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 10 21:16 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 10 19:54 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 10 19:54 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Sep 10 19:54 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Sep 10 21:16 wwn-0x5000cca568d24c76 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 10 19:55 wwn-0x5000cca568d24c76-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 10 21:16 wwn-0x5000cca568d24c76-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 10 21:16 wwn-0x5000cca568d24c76-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 10 19:54 wwn-0x5000cca568d24c76-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 10 19:54 wwn-0x5000cca568d24c76-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Sep 10 19:54 wwn-0x5000cca568d24c76-part6 -> ../../sda6

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda5        /                        ext4       (rw,errors=remount-ro)


=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
else
  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_BE
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c3039921-b671-4542-814d-7f9c9f498f68' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
	else
	  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
	fi
	linux	/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-129-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-c3039921-b671-4542-814d-7f9c9f498f68' {
	menuentry 'Ubuntu, avec Linux 3.13.0-129-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-129-generic-advanced-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.13.0-129-generic…'
		linux	/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-129-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-129-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-129-generic-recovery-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.13.0-129-generic…'
		linux	/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-129-generic
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-126-generic-advanced-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.2.0-126-generic…'
		linux	/boot/vmlinuz-3.2.0-126-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-126-generic-recovery-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.2.0-126-generic…'
		linux	/boot/vmlinuz-3.2.0-126-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, avec Linux 3.0.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.0.0-26-generic-advanced-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.0.0-26-generic…'
		linux	/boot/vmlinuz-3.0.0-26-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.0.0-26-generic
	}
	menuentry 'Ubuntu, with Linux 3.0.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.0.0-26-generic-recovery-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.0.0-26-generic…'
		linux	/boot/vmlinuz-3.0.0-26-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.0.0-26-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
	else
	  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
	else
	  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-EAEE-EB49' {
	insmod part_msdos
	insmod fat
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  EAEE-EB49
	else
	  search --no-floppy --fs-uuid --set=root EAEE-EB49
	fi
	parttool ${root} hidden-
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry 'Windows Vista (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-9E224F27224F03AD' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9E224F27224F03AD
	else
	  search --no-floppy --fs-uuid --set=root 9E224F27224F03AD
	fi
	parttool ${root} hidden-
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda5 during installation
UUID=c3039921-b671-4542-814d-7f9c9f498f68 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=7defa292-1f49-4090-975e-47e76c38e1f6 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 118.641143799 = 127.389958144  boot/grub/grub.cfg                             1
 129.524829865 = 139.076227072  boot/grub/i386-pc/core.img                     1
 123.329524994 = 132.424069120  boot/vmlinuz-3.0.0-26-generic                  1
 114.174407959 = 122.593837056  boot/vmlinuz-3.13.0-129-generic                1
 108.466484070 = 116.465000448  boot/vmlinuz-3.2.0-126-generic                 1
 114.174407959 = 122.593837056  vmlinuz                                        1
 108.466484070 = 116.465000448  vmlinuz.old                                    1
 132.332695007 = 142.091149312  boot/initrd.img-3.0.0-26-generic               2
 130.011402130 = 139.598680064  boot/initrd.img-3.13.0-129-generic             2
 132.063705444 = 141.802323968  boot/initrd.img-3.2.0-126-generic              3
 130.011402130 = 139.598680064  initrd.img                                     2
 132.063705444 = 141.802323968  initrd.img.old                                 3


ADDITIONAL INFORMATION :
=================== log of boot-info 2017-09-10__21h15 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info est exécuté en session installed (Ubuntu 14.04.5 LTS, trusty, Ubuntu-fr, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda5:L'OS actuellement utilisé - Ubuntu 14.04.5 LTS CurrentSession:linux
/dev/sda1:Windows Recovery Environment (loader):Windows:chain
/dev/sda2:Windows Vista (loader):Windows1:chain

=================== blkid:
/dev/sda1: LABEL="PQSERVICE" UUID="EAEE-EB49" TYPE="vfat"
/dev/sda2: LABEL="Acer" UUID="9E224F27224F03AD" TYPE="ntfs"
/dev/sda3: LABEL="DATA" UUID="C2EE3E9FEE3E8C23" TYPE="ntfs"
/dev/sda5: UUID="c3039921-b671-4542-814d-7f9c9f498f68" TYPE="ext4"
/dev/sda6: UUID="7defa292-1f49-4090-975e-47e76c38e1f6" TYPE="swap"


1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.

Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 sep 10 19:14 grub.d
total 76
-rwxr-xr-x 1 root root  9791 jui 17 07:51 00_header
-rwxr-xr-x 1 root root  6058 mai 13  2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 jui 17 07:51 10_linux
-rwxr-xr-x 1 root root 10412 jui 17 07:51 20_linux_xen
-rwxr-xr-x 1 root root  1992 mar 12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 jui 17 07:51 30_os-prober
-rwxr-xr-x 1 root root  1418 jui 17 07:51 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct  1  2011 40_custom
-rwxr-xr-x 1 root root   216 jui 17 07:51 41_custom
-rw-r--r-- 1 root root   483 oct  1  2011 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda3.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA Hitachi HTS54321 (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      1049kB  10.5GB  10.5GB  primary   fat32           diag
2      10.5GB  85.3GB  74.8GB  primary   ntfs            boot
3      85.3GB  110GB   24.8GB  primary   ntfs
4      110GB   160GB   50.0GB  extended
5      110GB   158GB   47.9GB  logical   ext4
6      158GB   160GB   2070MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:160GB:scsi:512:512:msdos:ATA Hitachi HTS54321;
1:1049kB:10.5GB:10.5GB:fat32::diag;
2:10.5GB:85.3GB:74.8GB:ntfs::boot;
3:85.3GB:110GB:24.8GB:ntfs::;
4:110GB:160GB:50.0GB:::;
5:110GB:158GB:47.9GB:ext4::;
6:158GB:160GB:2070MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        149,1G
sda1  part vfat     9,8G PQSERVICE
sda2  part ntfs    69,7G Acer
sda3  part ntfs    23,1G DATA
sda4  part            1K
sda5  part ext4    44,6G
sda6  part swap       2G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0         /mnt/boot-sav/sda3
sda4     1  0  0
sda5     1  0  0         /
sda6     1  0  0         [SWAP]
sr0      1  0  1 running


=================== mount:
/dev/sda5 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,relatime,cpuset,release_agent=/run/cgmanager/agents/cgm-release-agent.cpuset,clone_children)
cgroup on /sys/fs/cgroup/cpu type cgroup (rw,relatime,cpu,release_agent=/run/cgmanager/agents/cgm-release-agent.cpu)
cgroup on /sys/fs/cgroup/cpuacct type cgroup (rw,relatime,cpuacct,release_agent=/run/cgmanager/agents/cgm-release-agent.cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,relatime,memory,release_agent=/run/cgmanager/agents/cgm-release-agent.memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,relatime,devices,release_agent=/run/cgmanager/agents/cgm-release-agent.devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,relatime,freezer,release_agent=/run/cgmanager/agents/cgm-release-agent.freezer)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,relatime,blkio,release_agent=/run/cgmanager/agents/cgm-release-agent.blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=anne)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  adsp agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri dsp ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mem mixer net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 10 22 00  |.X.MSDOS5.0...".|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 80 38 01 07 27 00 00  00 00 00 00 02 00 00 00  |..8..'..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 49 eb ee ea 4e  4f 20 4e 41 4d 45 20 20  |..)I...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 4e 02 8a 56 40 b4 41  |{......|.N..V@.A|
00000070  bb aa 55 cd 13 72 10 81  fb 55 aa 75 0a f6 c1 01  |..U..r...U.u....|
00000080  74 05 fe 46 02 eb 2d 8a  56 40 b4 08 cd 13 73 05  |t..F..-.V@....s.|
00000090  b9 ff ff 8a f1 66 0f b6  c6 40 66 0f b6 d1 80 e2  |.....f...@f.....|
000000a0  3f f7 e2 86 cd c0 ed 06  41 66 0f b7 c9 66 f7 e1  |?.......Af...f..|
000000b0  66 89 46 f8 83 7e 16 00  75 38 83 7e 2a 00 77 32  |f.F..~..u8.~*.w2|
000000c0  66 8b 46 1c 66 83 c0 0c  bb 00 80 b9 01 00 e8 2b  |f.F.f..........+|
000000d0  00 e9 2c 03 a0 fa 7d b4  7d 8b f0 ac 84 c0 74 17  |..,...}.}.....t.|
000000e0  3c ff 74 09 b4 0e bb 07  00 cd 10 eb ee a0 fb 7d  |<.t............}|
000000f0  eb e5 a0 f9 7d eb e0 98  cd 16 cd 19 66 60 80 7e  |....}.......f`.~|
00000100  02 00 0f 84 20 00 66 6a  00 66 50 06 53 66 68 10  |.... .fj.fP.Sfh.|
00000110  00 01 00 b4 42 8a 56 40  8b f4 cd 13 66 58 66 58  |....B.V@....fXfX|
00000120  66 58 66 58 eb 33 66 3b  46 f8 72 03 f9 eb 2a 66  |fXfX.3f;F.r...*f|
00000130  33 d2 66 0f b7 4e 18 66  f7 f1 fe c2 8a ca 66 8b  |3.f..N.f......f.|
00000140  d0 66 c1 ea 10 f7 76 1a  86 d6 8a 56 40 8a e8 c0  |.f....v....V@...|
00000150  e4 06 0a cc b8 01 02 cd  13 66 61 0f 82 75 ff 81  |.........fa..u..|
00000160  c3 00 02 66 40 49 75 94  c3 42 4f 4f 54 4d 47 52  |...f@Iu..BOOTMGR|
00000170  20 20 20 20 00 00 00 00  00 00 00 00 00 00 00 00  |    ............|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 52 65  |..............Re|
000001b0  6d 6f 76 65 20 64 69 73  6b 73 20 6f 72 20 6f 74  |move disks or ot|
000001c0  68 65 72 20 6d 65 64 69  61 2e ff 0d 0a 44 69 73  |her media....Dis|
000001d0  6b 20 65 72 72 6f 72 ff  0d 0a 50 72 65 73 73 20  |k error...Press |
000001e0  61 6e 79 20 6b 65 79 20  74 6f 20 72 65 73 74 61  |any key to resta|
000001f0  72 74 0d 0a 00 00 00 00  00 ac cb d8 00 00 55 aa  |rt............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 38 01  |........?.....8.|
00000020  00 00 00 00 80 00 00 00  ff a7 b4 08 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  e6 6a 0d 00 00 00 00 00  |.........j......|
00000040  f6 00 00 00 01 00 00 00  ad 03 4f 22 27 4f 22 9e  |..........O"'O".|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 30 ed 09  |........?....0..|
00000020  00 00 00 00 80 00 80 00  40 95 e2 02 00 00 00 00  |........@.......|
00000030  00 00 0c 00 00 00 00 00  54 29 2e 00 00 00 00 00  |........T)......|
00000040  f6 00 00 00 01 00 00 00  23 8c 3e ee 9f 3e ee c2  |........#.>..>..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  964M   12K  964M   1% /dev
tmpfs          tmpfs     195M  1.2M  194M   1% /run
/dev/sda5      ext4       44G   36G  5.8G  87% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     973M   26M  948M   3% /run/shm
none           tmpfs     100M   76K  100M   1% /run/user
/dev/sda1      vfat      9.8G  7.4G  2.4G  76% /mnt/boot-sav/sda1
/dev/sda2      fuseblk    70G   68G  2.3G  97% /mnt/boot-sav/sda2
/dev/sda3      fuseblk    24G   15G  8.9G  62% /mnt/boot-sav/sda3

=================== fdisk -l:

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xb74620b6

Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048    20482047    10240000   27  Hidden NTFS WinRE
/dev/sda2   *    20482048   166539263    73028608    7  HPFS/NTFS/exFAT
/dev/sda3       166539264   214943053    24201895    7  HPFS/NTFS/exFAT
/dev/sda4       214943742   312580095    48818177    5  Extended
/dev/sda5       214943744   308535295    46795776   83  Linux
/dev/sda6       308537344   312580095     2021376   82  Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.5 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Tu as fait une mise à niveau de 12.04 vers 14.04.
Tu as trois noyaux :
3.13.0-129
3.2.0-126
3.0.0-26 (de 11.10 !).
  - -

Le boot-info me suggère bien des améliorations en fin de page, mais est-ce utile, recommandé, et surtout comment les appliquer ?

Ce n'est vraiment pas le problème.

Par contre, le message sur ta dernière capture :

usb (...) device descriptor read/64 error -110

indique un problème usb,
   soit d'alimentation,
   soit du périphérique qui est lui-même mal en point.

Donc éteins complètement ce portable pendant au moins cinq minutes.
Débranche tous les périphériques usb (hub, imprimante, clavier, souris, clef wifi, clefs de stockage ou autre) de ce portable.

Après les cinq minutes, démarre normalement.
Puis donne le retour complet et entre balises-code de :

sudo cat /var/log/dmesg

et ceux de

sudo cat /var/log/dmesg.0
sudo cat /var/log/dmesg.1

(L'un des deux derniers te donnera un message d'erreur, c'est normal).
Et de

df -Ti | grep sda5
dpkg -l | grep -Ev "^ii|^rc"

  - -
Merci de dire si windows démarre normalement ou non.

Il faudra rapidement contrôler l'usure du disque.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#3 Le 11/09/2017, à 20:47

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Bonsoir, et merci de ta rapide intervention, pas autant que la mienne, désolé.
Tout d'abord, windows démarre normalement, j'en ai profité pour faire des mises à jour (passage au sp2, etc) nettoyage et mise à jour des pilotes, mon gestionnaire de périphériques m'indique bien un usb inconnu, tout comme driverscloud qui me le signale comme mal installé lui ...
Ceci dit, voici ce que m'indique tes commandes :

sudo cat /var/log/dmesg

Me renvoie :

put/input0
[    1.189304] ACPI: Lid Switch [LID0]
[    1.189397] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.189406] ACPI: Sleep Button [SLPB]
[    1.189487] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.189494] ACPI: Power Button [PWRF]
[    1.192568] Monitor-Mwait will be used to enter C-1 state
[    1.192581] Monitor-Mwait will be used to enter C-2 state
[    1.192587] tsc: Marking TSC unstable due to TSC halts in idle
[    1.192597] ACPI: acpi_idle registered with cpuidle
[    1.228220] thermal LNXTHERM:00: registered as thermal_zone0
[    1.228227] ACPI: Thermal Zone [TZS0] (49 C)
[    1.240622] thermal LNXTHERM:01: registered as thermal_zone1
[    1.240630] ACPI: Thermal Zone [TZS1] (49 C)
[    1.240720] GHES: HEST is not enabled!
[    1.240993] isapnp: Scanning for PnP cards...
[    1.241006] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.252605] Linux agpgart interface v0.103
[    1.252845] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    1.253009] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.254380] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.254638] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.258069] brd: module loaded
[    1.259777] loop: module loaded
[    1.260848] libphy: Fixed MDIO Bus: probed
[    1.261084] tun: Universal TUN/TAP device driver, 1.6
[    1.261088] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.261156] PPP generic driver version 2.4.2
[    1.261245] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.261254] ehci-pci: EHCI PCI platform driver
[    1.261581] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.261595] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.261618] ehci-pci 0000:00:1a.7: debug port 1
[    1.265542] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.265592] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf4a04800
[    1.276054] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.276169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.276175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.276181] usb usb1: Product: EHCI Host Controller
[    1.276186] usb usb1: Manufacturer: Linux 3.13.0-129-generic ehci_hcd
[    1.276190] usb usb1: SerialNumber: 0000:00:1a.7
[    1.276445] hub 1-0:1.0: USB hub found
[    1.276463] hub 1-0:1.0: 6 ports detected
[    1.277001] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.277013] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.277034] ehci-pci 0000:00:1d.7: debug port 1
[    1.280952] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.280998] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf4a04c00
[    1.292056] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.292137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.292143] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.292148] usb usb2: Product: EHCI Host Controller
[    1.292153] usb usb2: Manufacturer: Linux 3.13.0-129-generic ehci_hcd
[    1.292158] usb usb2: SerialNumber: 0000:00:1d.7
[    1.292358] hub 2-0:1.0: USB hub found
[    1.292374] hub 2-0:1.0: 6 ports detected
[    1.292727] ehci-platform: EHCI generic platform driver
[    1.292746] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.292750] ohci-pci: OHCI PCI platform driver
[    1.292776] ohci-platform: OHCI generic platform driver
[    1.292791] uhci_hcd: USB Universal Host Controller Interface driver
[    1.293016] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.293028] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.293062] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[    1.293157] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.293163] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.293168] usb usb3: Product: UHCI Host Controller
[    1.293173] usb usb3: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.293178] usb usb3: SerialNumber: 0000:00:1a.0
[    1.293371] hub 3-0:1.0: USB hub found
[    1.293387] hub 3-0:1.0: 2 ports detected
[    1.293741] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.293794] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.293828] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
[    1.293918] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.293924] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.293929] usb usb4: Product: UHCI Host Controller
[    1.293934] usb usb4: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.293938] usb usb4: SerialNumber: 0000:00:1a.1
[    1.294130] hub 4-0:1.0: USB hub found
[    1.294148] hub 4-0:1.0: 2 ports detected
[    1.294516] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.294527] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.294564] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860
[    1.294655] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.294661] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.294666] usb usb5: Product: UHCI Host Controller
[    1.294671] usb usb5: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.294675] usb usb5: SerialNumber: 0000:00:1a.2
[    1.294906] hub 5-0:1.0: USB hub found
[    1.294921] hub 5-0:1.0: 2 ports detected
[    1.295264] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.295276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.295309] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[    1.295402] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.295408] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.295413] usb usb6: Product: UHCI Host Controller
[    1.295417] usb usb6: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.295422] usb usb6: SerialNumber: 0000:00:1d.0
[    1.295607] hub 6-0:1.0: USB hub found
[    1.295622] hub 6-0:1.0: 2 ports detected
[    1.295999] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.296040] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.296092] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
[    1.296183] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.296189] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.296193] usb usb7: Product: UHCI Host Controller
[    1.296198] usb usb7: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.296203] usb usb7: SerialNumber: 0000:00:1d.1
[    1.296392] hub 7-0:1.0: USB hub found
[    1.296407] hub 7-0:1.0: 2 ports detected
[    1.296835] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.296847] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.296900] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    1.296990] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.296996] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.297000] usb usb8: Product: UHCI Host Controller
[    1.297005] usb usb8: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.297010] usb usb8: SerialNumber: 0000:00:1d.2
[    1.297209] hub 8-0:1.0: USB hub found
[    1.297224] hub 8-0:1.0: 2 ports detected
[    1.297549] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.310064] i8042: Detected active multiplexing controller, rev 1.1
[    1.319375] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.319387] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.319442] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.319493] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.319539] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.319748] mousedev: PS/2 mouse device common for all mice
[    1.320162] rtc_cmos 00:07: RTC can wake from S4
[    1.320344] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.320382] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.320546] device-mapper: uevent: version 1.0.3
[    1.320686] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.320730] platform eisa.0: Probing EISA bus 0
[    1.320736] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.320743] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.320748] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.320753] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.320758] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.320763] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.320768] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.320773] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.320778] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.320782] platform eisa.0: EISA: Detected 0 cards
[    1.320798] cpufreq-nforce2: No nForce2 chipset.
[    1.320806] ledtrig-cpu: registered to indicate activity on CPUs
[    1.321101] TCP: cubic registered
[    1.321340] NET: Registered protocol family 10
[    1.321781] NET: Registered protocol family 17
[    1.321808] Key type dns_resolver registered
[    1.322163] Using IPI No-Shortcut mode
[    1.322324] Loading compiled-in X.509 certificates
[    1.330245] Loaded X.509 cert 'Magrathea: Glacier signing key: bc65a9de153a3db143bbf3011b103819aed800f9'
[    1.330273] registered taskstats version 1
[    1.335404] Key type trusted registered
[    1.344241] Key type encrypted registered
[    1.344251] AppArmor: AppArmor sha1 policy hashing enabled
[    1.344256] IMA: No TPM chip found, activating TPM-bypass!
[    1.344896] regulator-dummy: disabling
[    1.344993]   Magic number: 1:645:948
[    1.345059] tty tty5: hash matches
[    1.345141] rtc_cmos 00:07: setting system clock to 2017-09-11 18:55:41 UTC (1505156141)
[    1.346235] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.346237] EDD information not available.
[    1.346325] PM: Hibernation image not present or could not be loaded.
[    1.350822] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.551832] isapnp: No Plug & Play device found
[    1.784275] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.784284] ACPI: Battery Slot [BAT0] (battery present)
[    1.784720] Freeing unused kernel memory: 884K (c19c9000 - c1aa6000)
[    1.784795] Write protecting the kernel text: 6592k
[    1.784913] Write protecting the kernel read-only data: 2784k
[    1.784914] NX-protecting the kernel data: 5696k
[    1.801716] systemd-udevd[99]: starting version 204
[    1.843830] pps_core: LinuxPPS API ver. 1 registered
[    1.843833] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.849407] PTP clock support registered
[    1.854050] sdhci: Secure Digital Host Controller Interface driver
[    1.854053] sdhci: Copyright(c) Pierre Ossman
[    1.855660] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    1.860920] tg3.c:v3.134 (Sep 16, 2013)
[    1.861781] sdhci-pci 0000:0d:06.2: SDHCI controller found [1217:7120] (rev 2)
[    1.861872] sdhci-pci 0000:0d:06.2: dummy supplies not allowed
[    1.861874] mmc0: no vqmmc regulator found
[    1.861877] sdhci-pci 0000:0d:06.2: dummy supplies not allowed
[    1.861879] mmc0: no vmmc regulator found
[    1.861979] mmc0: SDHCI controller on PCI [0000:0d:06.2] using DMA
[    1.872310] ahci 0000:00:1f.2: version 3.0
[    1.872475] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.872536] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.872569] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.872573] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
[    1.885199] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95764m) rev 5784100] (PCI Express) MAC address 00:1d:72:d4:58:c2
[    1.885205] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    1.885208] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.885211] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.896914] scsi0 : ahci
[    1.897042] scsi1 : ahci
[    1.897135] scsi2 : ahci
[    1.897216] scsi3 : ahci
[    1.897294] scsi4 : ahci
[    1.897371] scsi5 : ahci
[    1.897428] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 43
[    1.897432] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 43
[    1.897434] ata3: DUMMY
[    1.897436] ata4: DUMMY
[    1.897439] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 43
[    1.897442] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 43
[    2.216047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.217148] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
[    2.217155] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.218438] ata1.00: configured for UDMA/133
[    2.218707] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[    2.218958] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.219015] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.219065] sd 0:0:0:0: [sda] Write Protect is off
[    2.219070] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.219098] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.282377]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.283089] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.536050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.539797] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
[    2.544844] ata2.00: configured for UDMA/133
[    2.660398] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RP05 PQ: 0 ANSI: 5
[    2.767150] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.767155] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.767432] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.767536] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.005826] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input10
[    3.027669] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input9
[    3.084050] ata5: SATA link down (SStatus 0 SControl 300)
[    3.404051] ata6: SATA link down (SStatus 0 SControl 300)
[    4.392375] random: nonblocking pool is initialized
[    4.524403] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.964099] usb 1-3: device descriptor read/64, error -110
[   12.180094] usb 1-3: device descriptor read/64, error -110
[   12.396095] usb 1-3: new high-speed USB device number 4 using ehci-pci
[   17.508096] usb 1-3: device descriptor read/64, error -110
[   22.724035] usb 1-3: device descriptor read/64, error -110
[   22.940095] usb 1-3: new high-speed USB device number 5 using ehci-pci
[   27.960283] usb 1-3: device descriptor read/8, error -110
[   33.080304] usb 1-3: device descriptor read/8, error -110
[   33.296034] usb 1-3: new high-speed USB device number 6 using ehci-pci
[   38.316306] usb 1-3: device descriptor read/8, error -110
[   43.436314] usb 1-3: device descriptor read/8, error -110
[   43.540093] hub 1-0:1.0: unable to enumerate USB device on port 3
[   43.804022] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[   43.976148] usb 3-1: New USB device found, idVendor=147e, idProduct=1000
[   43.976155] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   43.976161] usb 3-1: Product: Fingerprint Sensor   
[   43.976165] usb 3-1: Manufacturer: TouchStrip        
[   44.420047] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[   49.940053] usb 4-1: device descriptor read/64, error -110
[   55.360052] usb 4-1: device descriptor read/64, error -110
[   55.780045] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[   59.377924] Adding 2021372k swap on /dev/sda6.  Priority:-1 extents:1 across:2021372k FS
[   59.665015] systemd-udevd[328]: starting version 204
[   59.905413] wmi: Mapper loaded
[   59.943597] lp: driver loaded but no devices found
[   59.957610] [drm] Initialized drm 1.1.0 20060810
[   59.965469] ppdev: user-space parallel port driver
[   60.016316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   60.032320] [drm] Memory usable by graphics device = 2048M
[   60.032326] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[   60.032328] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   60.032356] Console: switching to colour dummy device 80x25
[   60.056080] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   60.056096] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   60.056098] [drm] Driver supports precise vblank timestamp query.
[   60.056174] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   60.060431] cfg80211: Calling CRDA to update world regulatory domain
[   60.075072] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   60.075076] Copyright(c) 2003-2013 Intel Corporation
[   60.075251] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   60.075319] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[   60.154085] yenta_cardbus 0000:0d:06.0: CardBus bridge found [1025:013c]
[   60.154109] yenta_cardbus 0000:0d:06.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   60.266197] fbcon: inteldrmfb (fb0) is primary device
[   60.280923] yenta_cardbus 0000:0d:06.0: ISA IRQ mask 0x0cb8, PCI irq 22
[   60.280926] yenta_cardbus 0000:0d:06.0: Socket status: 30000006
[   60.280930] pci_bus 0000:0d: Raising subordinate bus# of parent bus (#0d) from #0e to #11
[   60.280938] yenta_cardbus 0000:0d:06.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   60.280940] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff:
[   60.285359]  excluding 0x5000-0x50ff 0x5400-0x54ff
[   60.285362] yenta_cardbus 0000:0d:06.0: pcmcia: parent PCI bridge window: [mem 0xf4700000-0xf47fffff]
[   60.285364] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4700000-0xf47fffff:
[   60.285378]  excluding 0xf4700000-0xf470ffff
[   60.285381] yenta_cardbus 0000:0d:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   60.285383] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[   60.285400]  excluding 0x80000000-0x83ffffff
[   60.637787] type=1400 audit(1505156200.789:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=419 comm="apparmor_parser"
[   60.637793] type=1400 audit(1505156200.789:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=419 comm="apparmor_parser"
[   60.637798] type=1400 audit(1505156200.789:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=419 comm="apparmor_parser"
[   60.669664] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[   60.717564] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   60.717566] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   60.717568] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   60.717570] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   60.717626] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   60.748269] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   61.028098] Console: switching to colour frame buffer device 160x50
[   61.033373] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   61.033376] i915 0000:00:02.0: registered panic notifier
[   61.056700] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   61.076670] acpi device:03: registered as cooling_device2
[   61.076762] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[   61.076883] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   61.077038] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   61.077046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   61.077300] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   61.077306] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   61.077310] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   61.077314] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   61.077317] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   61.077595] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   61.096057] usb 4-1: device descriptor read/64, error -110
[   61.098835] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   61.098839]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.098842]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   61.098843]    mono: mono_out=0x0
[   61.098845]    inputs:
[   61.098848]      Mic=0x18
[   61.098850]      Internal Mic=0x12
[   61.098852]      Line=0x1a
[   61.098854] realtek: No valid SSID, checking pincfg 0x4016852d for NID 0x1d
[   61.098856] realtek: Enabling init ASM_ID=0x852d CODEC_ID=10ec0268
[   61.103289] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[   61.103293]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.103295]    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.103297]    mono: mono_out=0x0
[   61.103298]    inputs:
[   61.114424] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   61.114536] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   61.114615] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   61.114692] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   61.341642] acer_wmi: Acer Laptop ACPI-WMI Extras
[   61.346591] acer_wmi: Function bitmap for Communication Device: 0x13
[   61.347073] acer_wmi: Brightness must be controlled by acpi video driver
[   61.347324] input: Acer BMA150 accelerometer as /devices/virtual/input/input18
[   61.559908] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   61.561585]  clean.
[   61.561623] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   61.573055]  excluding 0x400-0x48f 0x4d0-0x4d7
[   61.573431] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   61.573923]  clean.
[   61.573951] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   61.574528]  clean.
[   61.574562] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   61.574570]  excluding 0xc0000-0xd3fff 0xe4000-0xfffff
[   61.574641] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   61.574663]  clean.
[   61.574683] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   61.574735]  excluding 0x60000000-0x60ffffff
[   61.574760] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   61.575354]  clean.
[   61.758210] cfg80211: World regulatory domain updated:
[   61.758215] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   61.758218] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.758220] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.758223] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   61.758225] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.758228] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.944906] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   63.843926] init: failsafe main process (701) killed by TERM signal
[   64.159981] Bluetooth: Core ver 2.17
[   64.160083] NET: Registered protocol family 31
[   64.160086] Bluetooth: HCI device and connection manager initialized
[   64.160094] Bluetooth: HCI socket layer initialized
[   64.160098] Bluetooth: L2CAP socket layer initialized
[   64.160106] Bluetooth: SCO socket layer initialized
[   64.183311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   64.183315] Bluetooth: BNEP filters: protocol multicast
[   64.183326] Bluetooth: BNEP socket layer initialized
[   64.193608] Bluetooth: RFCOMM TTY layer initialized
[   64.193621] Bluetooth: RFCOMM socket layer initialized
[   64.193628] Bluetooth: RFCOMM ver 1.11
[   64.214604] type=1400 audit(1505156204.365:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=777 comm="apparmor_parser"
[   64.214613] type=1400 audit(1505156204.365:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=777 comm="apparmor_parser"
[   64.747095] init: cups main process (778) killed by HUP signal
[   64.747113] init: cups main process ended, respawning
[   65.849556] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   66.620264] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   66.625792] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   66.628904] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   66.727283] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   66.730419] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   66.736044] usb 4-1: device descriptor read/64, error -110
[   66.756573] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.952066] usb 4-1: new full-speed USB device number 4 using uhci_hcd
[   67.687042] type=1400 audit(1505156207.837:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=901 comm="apparmor_parser"
[   67.687053] type=1400 audit(1505156207.837:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=901 comm="apparmor_parser"
[   67.687059] type=1400 audit(1505156207.837:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=901 comm="apparmor_parser"
[   67.689572] type=1400 audit(1505156207.841:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=902 comm="apparmor_parser"
[   67.689581] type=1400 audit(1505156207.841:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=902 comm="apparmor_parser"
[   67.689588] type=1400 audit(1505156207.841:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=902 comm="apparmor_parser"
[   67.756373] type=1400 audit(1505156207.909:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=900 comm="apparmor_parser"
[   67.756382] type=1400 audit(1505156207.909:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=900 comm="apparmor_parser"
[   67.758194] type=1400 audit(1505156207.909:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=906 comm="apparmor_parser"
[   67.874194] type=1400 audit(1505156208.025:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=907 comm="apparmor_parser"
[   68.484497] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
anne@anne-TravelMate-5730:~$ 
sudo cat /var/log/dmesg.0

Me donne :

[    1.189705] Monitor-Mwait will be used to enter C-2 state
[    1.189713] tsc: Marking TSC unstable due to TSC halts in idle
[    1.189723] ACPI: acpi_idle registered with cpuidle
[    1.216315] thermal LNXTHERM:00: registered as thermal_zone0
[    1.216323] ACPI: Thermal Zone [TZS0] (64 C)
[    1.227003] thermal LNXTHERM:01: registered as thermal_zone1
[    1.227010] ACPI: Thermal Zone [TZS1] (64 C)
[    1.227100] GHES: HEST is not enabled!
[    1.227347] isapnp: Scanning for PnP cards...
[    1.227356] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.234901] Linux agpgart interface v0.103
[    1.235178] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    1.235351] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.236700] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.236965] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.240505] brd: module loaded
[    1.242271] loop: module loaded
[    1.243294] libphy: Fixed MDIO Bus: probed
[    1.243527] tun: Universal TUN/TAP device driver, 1.6
[    1.243532] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.243607] PPP generic driver version 2.4.2
[    1.243786] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.243795] ehci-pci: EHCI PCI platform driver
[    1.244120] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.244137] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.244163] ehci-pci 0000:00:1a.7: debug port 1
[    1.248091] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.248152] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf4a04800
[    1.260058] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.260172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.260179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.260184] usb usb1: Product: EHCI Host Controller
[    1.260189] usb usb1: Manufacturer: Linux 3.13.0-129-generic ehci_hcd
[    1.260194] usb usb1: SerialNumber: 0000:00:1a.7
[    1.260404] hub 1-0:1.0: USB hub found
[    1.260421] hub 1-0:1.0: 6 ports detected
[    1.260961] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.260973] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.261032] ehci-pci 0000:00:1d.7: debug port 1
[    1.264935] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.264983] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf4a04c00
[    1.276060] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.276142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.276175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.276180] usb usb2: Product: EHCI Host Controller
[    1.276185] usb usb2: Manufacturer: Linux 3.13.0-129-generic ehci_hcd
[    1.276190] usb usb2: SerialNumber: 0000:00:1d.7
[    1.276390] hub 2-0:1.0: USB hub found
[    1.276405] hub 2-0:1.0: 6 ports detected
[    1.276704] ehci-platform: EHCI generic platform driver
[    1.276723] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.276727] ohci-pci: OHCI PCI platform driver
[    1.276754] ohci-platform: OHCI generic platform driver
[    1.276770] uhci_hcd: USB Universal Host Controller Interface driver
[    1.276995] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.277006] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.277040] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[    1.277133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.277139] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.277144] usb usb3: Product: UHCI Host Controller
[    1.277149] usb usb3: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.277154] usb usb3: SerialNumber: 0000:00:1a.0
[    1.277351] hub 3-0:1.0: USB hub found
[    1.277367] hub 3-0:1.0: 2 ports detected
[    1.277750] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.277762] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.277795] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
[    1.277884] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.277890] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.277895] usb usb4: Product: UHCI Host Controller
[    1.277900] usb usb4: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.277904] usb usb4: SerialNumber: 0000:00:1a.1
[    1.278091] hub 4-0:1.0: USB hub found
[    1.278114] hub 4-0:1.0: 2 ports detected
[    1.278478] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.278489] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.278522] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860
[    1.278619] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.278625] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.278630] usb usb5: Product: UHCI Host Controller
[    1.278635] usb usb5: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.278639] usb usb5: SerialNumber: 0000:00:1a.2
[    1.278826] hub 5-0:1.0: USB hub found
[    1.278842] hub 5-0:1.0: 2 ports detected
[    1.279228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.279239] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.279272] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[    1.279394] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.279399] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.279404] usb usb6: Product: UHCI Host Controller
[    1.279409] usb usb6: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.279414] usb usb6: SerialNumber: 0000:00:1d.0
[    1.279600] hub 6-0:1.0: USB hub found
[    1.279615] hub 6-0:1.0: 2 ports detected
[    1.279956] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.279971] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.280060] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
[    1.280151] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.280157] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.280190] usb usb7: Product: UHCI Host Controller
[    1.280195] usb usb7: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.280200] usb usb7: SerialNumber: 0000:00:1d.1
[    1.280388] hub 7-0:1.0: USB hub found
[    1.280403] hub 7-0:1.0: 2 ports detected
[    1.280775] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.280790] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.280840] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    1.280937] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.280943] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.280948] usb usb8: Product: UHCI Host Controller
[    1.280953] usb usb8: Manufacturer: Linux 3.13.0-129-generic uhci_hcd
[    1.280957] usb usb8: SerialNumber: 0000:00:1d.2
[    1.281141] hub 8-0:1.0: USB hub found
[    1.281156] hub 8-0:1.0: 2 ports detected
[    1.281523] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.297335] i8042: Detected active multiplexing controller, rev 1.1
[    1.305839] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.305907] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.305967] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.306013] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.306060] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.306279] mousedev: PS/2 mouse device common for all mice
[    1.306669] rtc_cmos 00:07: RTC can wake from S4
[    1.306847] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.306884] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.307044] device-mapper: uevent: version 1.0.3
[    1.307184] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.307232] platform eisa.0: Probing EISA bus 0
[    1.307239] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.307244] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.307249] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.307254] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.307259] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.307264] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.307269] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.307274] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.307279] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.307284] platform eisa.0: EISA: Detected 0 cards
[    1.307298] cpufreq-nforce2: No nForce2 chipset.
[    1.307307] ledtrig-cpu: registered to indicate activity on CPUs
[    1.307595] TCP: cubic registered
[    1.307857] NET: Registered protocol family 10
[    1.308322] NET: Registered protocol family 17
[    1.308344] Key type dns_resolver registered
[    1.308707] Using IPI No-Shortcut mode
[    1.308864] Loading compiled-in X.509 certificates
[    1.316827] Loaded X.509 cert 'Magrathea: Glacier signing key: bc65a9de153a3db143bbf3011b103819aed800f9'
[    1.316854] registered taskstats version 1
[    1.322011] Key type trusted registered
[    1.330795] Key type encrypted registered
[    1.330805] AppArmor: AppArmor sha1 policy hashing enabled
[    1.330810] IMA: No TPM chip found, activating TPM-bypass!
[    1.331483] regulator-dummy: disabling
[    1.331578]   Magic number: 1:442:647
[    1.331678] acpi LNXCPU:00: hash matches
[    1.331729] rtc_cmos 00:07: setting system clock to 2017-09-11 19:36:57 UTC (1505158617)
[    1.332813] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.332815] EDD information not available.
[    1.332897] PM: Hibernation image not present or could not be loaded.
[    1.338914] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.538726] isapnp: No Plug & Play device found
[    1.785664] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.785672] ACPI: Battery Slot [BAT0] (battery present)
[    1.786108] Freeing unused kernel memory: 884K (c19c9000 - c1aa6000)
[    1.786184] Write protecting the kernel text: 6592k
[    1.786301] Write protecting the kernel read-only data: 2784k
[    1.786303] NX-protecting the kernel data: 5696k
[    1.802868] systemd-udevd[99]: starting version 204
[    1.832064] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    1.832907] pps_core: LinuxPPS API ver. 1 registered
[    1.832910] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.839698] PTP clock support registered
[    1.851582] tg3.c:v3.134 (Sep 16, 2013)
[    1.861783] sdhci: Secure Digital Host Controller Interface driver
[    1.861787] sdhci: Copyright(c) Pierre Ossman
[    1.864708] ahci 0000:00:1f.2: version 3.0
[    1.864887] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.864942] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.864976] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.864980] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
[    1.867221] sdhci-pci 0000:0d:06.2: SDHCI controller found [1217:7120] (rev 2)
[    1.867336] sdhci-pci 0000:0d:06.2: dummy supplies not allowed
[    1.867339] mmc0: no vqmmc regulator found
[    1.867342] sdhci-pci 0000:0d:06.2: dummy supplies not allowed
[    1.867344] mmc0: no vmmc regulator found
[    1.867450] mmc0: SDHCI controller on PCI [0000:0d:06.2] using DMA
[    1.881764] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95764m) rev 5784100] (PCI Express) MAC address 00:1d:72:d4:58:c2
[    1.881769] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    1.881772] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.881775] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.891327] scsi0 : ahci
[    1.891478] scsi1 : ahci
[    1.891641] scsi2 : ahci
[    1.891723] scsi3 : ahci
[    1.891817] scsi4 : ahci
[    1.891918] scsi5 : ahci
[    1.891977] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 43
[    1.891981] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 43
[    1.891983] ata3: DUMMY
[    1.891985] ata4: DUMMY
[    1.891988] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 43
[    1.891991] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 43
[    2.212057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.213167] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
[    2.213173] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.214467] ata1.00: configured for UDMA/133
[    2.214743] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[    2.214983] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.215020] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.215161] sd 0:0:0:0: [sda] Write Protect is off
[    2.215165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.215226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.270326]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.271066] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.532052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.535923] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
[    2.540957] ata2.00: configured for UDMA/133
[    2.652797] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RP05 PQ: 0 ANSI: 5
[    2.759553] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.759559] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.759831] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.759960] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.041056] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input10
[    3.064421] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input9
[    3.080076] ata5: SATA link down (SStatus 0 SControl 300)
[    3.400069] ata6: SATA link down (SStatus 0 SControl 300)
[    4.533684] random: nonblocking pool is initialized
[    4.679019] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.944081] usb 1-3: device descriptor read/64, error -110
[   12.160077] usb 1-3: device descriptor read/64, error -110
[   12.376076] usb 1-3: new high-speed USB device number 4 using ehci-pci
[   17.488079] usb 1-3: device descriptor read/64, error -110
[   22.704080] usb 1-3: device descriptor read/64, error -110
[   22.920083] usb 1-3: new high-speed USB device number 5 using ehci-pci
[   27.940359] usb 1-3: device descriptor read/8, error -110
[   33.060228] usb 1-3: device descriptor read/8, error -110
[   33.276080] usb 1-3: new high-speed USB device number 6 using ehci-pci
[   38.296241] usb 1-3: device descriptor read/8, error -110
[   43.416248] usb 1-3: device descriptor read/8, error -110
[   43.520109] hub 1-0:1.0: unable to enumerate USB device on port 3
[   43.784049] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[   43.956127] usb 3-1: New USB device found, idVendor=147e, idProduct=1000
[   43.956133] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   43.956139] usb 3-1: Product: Fingerprint Sensor   
[   43.956145] usb 3-1: Manufacturer: TouchStrip        
[   44.196037] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[   49.308040] usb 4-1: device descriptor read/64, error -110
[   54.524051] usb 4-1: device descriptor read/64, error -110
[   54.944066] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[   59.347006] Adding 2021372k swap on /dev/sda6.  Priority:-1 extents:1 across:2021372k FS
[   59.640626] systemd-udevd[328]: starting version 204
[   59.855222] [drm] Initialized drm 1.1.0 20060810
[   59.855581] lp: driver loaded but no devices found
[   59.904993] ppdev: user-space parallel port driver
[   59.940576] [drm] Memory usable by graphics device = 2048M
[   59.940582] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[   59.940584] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   59.940612] Console: switching to colour dummy device 80x25
[   59.966645] wmi: Mapper loaded
[   59.980402] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   59.980416] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   59.980418] [drm] Driver supports precise vblank timestamp query.
[   59.980490] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   60.043805] yenta_cardbus 0000:0d:06.0: CardBus bridge found [1025:013c]
[   60.043828] yenta_cardbus 0000:0d:06.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   60.056061] usb 4-1: device descriptor read/64, error -110
[   60.168912] yenta_cardbus 0000:0d:06.0: ISA IRQ mask 0x0cb8, PCI irq 22
[   60.168918] yenta_cardbus 0000:0d:06.0: Socket status: 30000006
[   60.168923] pci_bus 0000:0d: Raising subordinate bus# of parent bus (#0d) from #0e to #11
[   60.168934] yenta_cardbus 0000:0d:06.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   60.168938] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff:
[   60.182236]  excluding 0x5000-0x50ff 0x5400-0x54ff
[   60.189839] yenta_cardbus 0000:0d:06.0: pcmcia: parent PCI bridge window: [mem 0xf4700000-0xf47fffff]
[   60.189845] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4700000-0xf47fffff:
[   60.189848]  excluding 0xf4700000-0xf470ffff
[   60.189864] yenta_cardbus 0000:0d:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   60.189867] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[   60.189884]  excluding 0x80000000-0x83ffffff
[   60.192112] fbcon: inteldrmfb (fb0) is primary device
[   60.960103] Console: switching to colour frame buffer device 160x50
[   60.964901] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   60.964903] i915 0000:00:02.0: registered panic notifier
[   61.000772] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   61.020609] acpi device:03: registered as cooling_device2
[   61.020697] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[   61.020809] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   61.020984] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   61.020994] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   61.021060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   61.021168] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   61.021174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   61.021177] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   61.021181] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   61.021183] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   61.021421] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   61.064546] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   61.064551]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.064554]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   61.064555]    mono: mono_out=0x0
[   61.064557]    inputs:
[   61.064560]      Mic=0x18
[   61.064562]      Internal Mic=0x12
[   61.064564]      Line=0x1a
[   61.064566] realtek: No valid SSID, checking pincfg 0x4016852d for NID 0x1d
[   61.064568] realtek: Enabling init ASM_ID=0x852d CODEC_ID=10ec0268
[   61.083923] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[   61.083928]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.083930]    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.083932]    mono: mono_out=0x0
[   61.083933]    inputs:
[   61.084565] cfg80211: Calling CRDA to update world regulatory domain
[   61.101086] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   61.101090] Copyright(c) 2003-2013 Intel Corporation
[   61.101290] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   61.101431] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[   61.109384] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   61.109538] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   61.109680] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   61.109866] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   61.243297] acer_wmi: Acer Laptop ACPI-WMI Extras
[   61.248771] acer_wmi: Function bitmap for Communication Device: 0x13
[   61.249259] acer_wmi: Brightness must be controlled by acpi video driver
[   61.249819] input: Acer BMA150 accelerometer as /devices/virtual/input/input18
[   61.286164] type=1400 audit(1505158677.451:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=446 comm="apparmor_parser"
[   61.286173] type=1400 audit(1505158677.451:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=446 comm="apparmor_parser"
[   61.286179] type=1400 audit(1505158677.451:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=446 comm="apparmor_parser"
[   61.288569] type=1400 audit(1505158677.455:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=448 comm="apparmor_parser"
[   61.288581] type=1400 audit(1505158677.455:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
[   61.288588] type=1400 audit(1505158677.455:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
[   61.346689] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[   61.424309] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   61.424314] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   61.424317] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   61.424320] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   61.428074] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   61.470511] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   61.493450] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   61.494847]  clean.
[   61.494874] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   61.507974]  excluding 0x400-0x48f 0x4d0-0x4d7
[   61.520294] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   61.520746]  clean.
[   61.520773] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   61.521265]  clean.
[   61.521294] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   61.521302]  excluding 0xc0000-0xd3fff 0xe4000-0xfffff
[   61.521334] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   61.521359]  clean.
[   61.521377] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   61.521392]  excluding 0x60000000-0x60ffffff
[   61.521412] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   61.521934]  clean.
[   61.531183] cfg80211: World regulatory domain updated:
[   61.531187] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   61.531191] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.531193] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.531196] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   61.531198] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.531200] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   63.615418] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   64.545769] init: failsafe main process (717) killed by TERM signal
[   65.072725] Bluetooth: Core ver 2.17
[   65.072779] NET: Registered protocol family 31
[   65.072781] Bluetooth: HCI device and connection manager initialized
[   65.073126] Bluetooth: HCI socket layer initialized
[   65.073131] Bluetooth: L2CAP socket layer initialized
[   65.073137] Bluetooth: SCO socket layer initialized
[   65.094253] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   65.094258] Bluetooth: BNEP filters: protocol multicast
[   65.094268] Bluetooth: BNEP socket layer initialized
[   65.105003] Bluetooth: RFCOMM TTY layer initialized
[   65.105016] Bluetooth: RFCOMM socket layer initialized
[   65.105026] Bluetooth: RFCOMM ver 1.11
[   65.131487] type=1400 audit(1505158681.295:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=792 comm="apparmor_parser"
[   65.131496] type=1400 audit(1505158681.295:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=792 comm="apparmor_parser"
[   65.272044] usb 4-1: device descriptor read/64, error -110
[   65.488035] usb 4-1: new full-speed USB device number 4 using uhci_hcd
[   65.713186] init: cups main process (793) killed by HUP signal
[   65.713203] init: cups main process ended, respawning
[   66.934902] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   67.705936] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   67.711428] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   67.714524] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   67.811275] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   67.814383] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   67.840539] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   68.319884] type=1400 audit(1505158684.483:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=898 comm="apparmor_parser"
[   68.319896] type=1400 audit(1505158684.483:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=898 comm="apparmor_parser"
[   68.319903] type=1400 audit(1505158684.483:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=898 comm="apparmor_parser"
[   68.322409] type=1400 audit(1505158684.487:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=899 comm="apparmor_parser"
[   68.322418] type=1400 audit(1505158684.487:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=899 comm="apparmor_parser"
[   68.322425] type=1400 audit(1505158684.487:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
[   68.444457] type=1400 audit(1505158684.611:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=897 comm="apparmor_parser"
[   68.444472] type=1400 audit(1505158684.611:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=897 comm="apparmor_parser"
[   68.446332] type=1400 audit(1505158684.611:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=903 comm="apparmor_parser"
[   68.484619] type=1400 audit(1505158684.651:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=904 comm="apparmor_parser"
[   69.171899] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
anne@anne-TravelMate-5730:~$ 
sudo cat /var/log/dmesg.1

Me donne :

anne@anne-TravelMate-5730:~$ sudo cat /var/log/dmesg.1
[sudo] password for anne: 
cat: /var/log/dmesg.1: Aucun fichier ou dossier de ce type
anne@anne-TravelMate-5730:~$ 
df -Ti | grep sda5

Me donne :

anne@anne-TravelMate-5730:~$ df -Ti | grep sda5
/dev/sda5        ext4     2927008 396671 2530337   14% /
anne@anne-TravelMate-5730:~$ 
dpkg -l | grep -Ev "^ii|^rc"

Me donne :

anne@anne-TravelMate-5730:~$ dpkg -l | grep -Ev "^ii|^rc"
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                                   Version                                             Architecture Description
+++-=====================================================-===================================================-============-====================================================================================
anne@anne-TravelMate-5730:~$ 

Voila tout ...

Hors ligne

#4 Le 13/09/2017, à 01:54

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Je me permets de relancer le sujet, ce problème de lenteur à l'affichage du bureau existe tjr, j'ai cru pouvoir me connecter directement sans mot de passe à partir du compte utilisateur, cela ne fonctionnait pas et choisis l'option connexion sans mot de passe, mais bon, l'appui sur connexion est toujours indispensable. Je suis retourné dans le compte utilisateur, et pour y avoir accès (déverrouiller) le mot de passe m'est demandé, et ... il n'est pas reconnu ! même après plusieurs tentatives, je sèche lamentablement sur ces problèmes, et me demande s'il ne serait préférable de formater ce disque et installer une version neuve d'ubuntu ?

Hors ligne

#5 Le 13/09/2017, à 04:49

moko138

Re : Lenteur après passage de la 12.04 à la 14.04

dpkg : tu n'as pas de paquets incomplètement installés. Bien.

df : OK

En revanche le problème usb se confirme. Et, si tu as bien appliqué

Débranche tous les périphériques usb (hub, imprimante, clavier, souris, clef wifi, clefs de stockage ou autre) de ce portable.

alors le problème usb semble côté carte-mère. Car dans /var/log/dmesg on voit :
- le lecteur d'empreintes digitales, OK :

[   43.804022] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[   43.976148] usb 3-1: New USB device found, idVendor=147e, idProduct=1000
[   43.976155] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   43.976161] usb 3-1: Product: Fingerprint Sensor
[   43.976165] usb 3-1: Manufacturer: TouchStrip

Mais aussi, affectant à la fois des ports usb2 et usb1 :

[    6.964099] usb 1-3: device descriptor read/64, error -110
[   12.180094] usb 1-3: device descriptor read/64, error -110
[   12.396095] usb 1-3: new high-speed USB device number 4 using ehci-pci
[   17.508096] usb 1-3: device descriptor read/64, error -110
[   22.724035] usb 1-3: device descriptor read/64, error -110
[   22.940095] usb 1-3: new high-speed USB device number 5 using ehci-pci
[   27.960283] usb 1-3: device descriptor read/8, error -110
[   33.080304] usb 1-3: device descriptor read/8, error -110
[   33.296034] usb 1-3: new high-speed USB device number 6 using ehci-pci
[   38.316306] usb 1-3: device descriptor read/8, error -110
[   43.436314] usb 1-3: device descriptor read/8, error -110
[   43.540093] hub 1-0:1.0: unable to enumerate USB device on port 3

puis

[   44.420047] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[   49.940053] usb 4-1: device descriptor read/64, error -110
[   55.360052] usb 4-1: device descriptor read/64, error -110
[   55.780045] usb 4-1: new full-speed USB device number 3 using uhci_hcd

  - -

Je dois filer. Relance-moi ce soir.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#6 Le 13/09/2017, à 21:37

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Tout d'abord merci de ton retour, alors voila ou j'en suis :
Je n'avais plus accès aux configurations me demandant le mot de passe, j'ai eu beau le changer en root (à partir du grub), rien n'y faisait et aucune commande en sudo ne fonctionnait bien sur. Après maintes recherches, il apparait que le fait de se loguer avec l'option sans mot de passe ferme l'accès aux commandes. Je me suis donc rendu dans le compte utilisateur et taper un mot de passe. Et là miracle, j'ai de nouveau accès aux mise à jour, je suis d'ailleurs en ce moment d’installer la 16.04 que le système me propose ! 9a risque de prendre un certain temps et j'écris depuis mon pc personnel.

Concernant ce problème des erreurs périphériques usb, comme tu le signale, ce doit etre du à la carte-mère, aucun des 3 ports usb  (ce que je pressent comme USB, càd clé-usb, apn) ne présentent aucun problèmes, tant en reconnaissance, que en lecture-écriture, éjection)
Par contre ce TravelMate est blindé de connectiques en tout genre, en y regardant de plus près, une connectique que je suppose etre du rj11 (modem téléphonique, style 56k) m'a l'air mal en point, les deux pins sont tordus et plus vraiment dans leur logement ... peut etre est cette connectique qui pose problème ?
J'ai suivi une vidéo yt concernant le désossage de ce portable, bin c'est pas rien ... mais en déconnectant et retirant celle-ci ça réglerait peut etre le problème ?

rj11

Autre chose, je pense aussi que la pile bios-cmos est hs, je dois resynchroniser l'heure lorsque je redémarre le pc le lendemain, toujours 2 heures de décalage, mais la aussi le désossage ..

Voila le bilan actuel, j'attends ton retour avec impatience, merci !

Hors ligne

#7 Le 14/09/2017, à 00:41

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Voila, la mise à jour vers 16.04 est faite, mais non sans difficultés, ce topic m'a aidé en partie à l'installation :
https://forum.ubuntu-fr.org/viewtopic.php?id=1465251
Mais après tout cela, toujours un message d'information :

Des erreurs ont été rencontrées pendant l'exécution :
 tex-common
 texlive-latex-base
 texlive-latex-base-doc
 texlive-luatex
E: Sub-process /usr/bin/dpkg returned an error code (1)

Je ne sais si c'est important-essentiel pour une utilisation classique ...
édit: résolu, installation manuelle, car les liens apt ne fonctionnent pas erreur sous Firefox, j'essaie de solutionner ... Résolu !

Tu m'écris :

Tu as fait une mise à niveau de 12.04 vers 14.04.
Tu as trois noyaux :
3.13.0-129
3.2.0-126
3.0.0-26 (de 11.10 !).

Est-ce que ces 2 derniers noyaux sont obsolètes et est il possible de les désinstaller ?
Edit: résolu - https://doc.ubuntu-fr.org/kernel#suppre … ens_noyaux
Mon dernier boot-info :

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7/2008: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /boot/bcd

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1               2,048    20,482,047    20,480,000  27 Hidden NTFS (Recovery Environment)
/dev/sda2    *     20,482,048   166,539,263   146,057,216   7 NTFS / exFAT / HPFS
/dev/sda3         166,539,264   214,943,053    48,403,790   7 NTFS / exFAT / HPFS
/dev/sda4         214,943,742   312,580,095    97,636,354   5 Extended
/dev/sda5         214,943,744   308,535,295    93,591,552  83 Linux
/dev/sda6         308,537,344   312,580,095     4,042,752  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        EAEE-EB49                              vfat       PQSERVICE
/dev/sda2        9E224F27224F03AD                       ntfs       Acer
/dev/sda3        C2EE3E9FEE3E8C23                       ntfs       DATA
/dev/sda5        c3039921-b671-4542-814d-7f9c9f498f68   ext4       
/dev/sda6        7defa292-1f49-4090-975e-47e76c38e1f6   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Sep 14 03:35 ata-HL-DT-ST_DVDRAM_GSA-T50N_K01886J5859 -> ../../sr0
lrwxrwxrwx 1 root root  9 Sep 14 04:07 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 14 04:07 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 14 04:07 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 14 04:07 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 14 04:07 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 14 04:07 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Sep 14 04:07 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Sep 14 04:07 wwn-0x5000cca568d24c76 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 14 04:07 wwn-0x5000cca568d24c76-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 14 04:07 wwn-0x5000cca568d24c76-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 14 04:07 wwn-0x5000cca568d24c76-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 14 04:07 wwn-0x5000cca568d24c76-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 14 04:07 wwn-0x5000cca568d24c76-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Sep 14 04:07 wwn-0x5000cca568d24c76-part6 -> ../../sda6

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda5        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
else
  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_BE
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c3039921-b671-4542-814d-7f9c9f498f68' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
	else
	  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
	fi
        linux	/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-129-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-c3039921-b671-4542-814d-7f9c9f498f68' {
	menuentry 'Ubuntu, avec Linux 3.13.0-129-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-129-generic-advanced-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.13.0-129-generic…'
	        linux	/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-129-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-129-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-129-generic-init-upstart-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.13.0-129-generic…'
	        linux	/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-129-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-129-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-129-generic-recovery-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.13.0-129-generic…'
	        linux	/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-129-generic
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-126-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-126-generic-advanced-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.2.0-126-generic…'
	        linux	/boot/vmlinuz-3.2.0-126-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-126-generic-init-upstart-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.2.0-126-generic…'
	        linux	/boot/vmlinuz-3.2.0-126-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-126-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-126-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-126-generic-recovery-c3039921-b671-4542-814d-7f9c9f498f68' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
		else
		  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
		fi
		echo	'Chargement de Linux 3.2.0-126-generic…'
	        linux	/boot/vmlinuz-3.2.0-126-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-126-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
	else
	  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  c3039921-b671-4542-814d-7f9c9f498f68
	else
	  search --no-floppy --fs-uuid --set=root c3039921-b671-4542-814d-7f9c9f498f68
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-EAEE-EB49' {
	insmod part_msdos
	insmod fat
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  EAEE-EB49
	else
	  search --no-floppy --fs-uuid --set=root EAEE-EB49
	fi
	parttool ${root} hidden-
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry 'Windows Vista (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-9E224F27224F03AD' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9E224F27224F03AD
	else
	  search --no-floppy --fs-uuid --set=root 9E224F27224F03AD
	fi
	parttool ${root} hidden-
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda5 during installation
UUID=c3039921-b671-4542-814d-7f9c9f498f68 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=7defa292-1f49-4090-975e-47e76c38e1f6 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 109.823143005 = 117.921701888  boot/grub/grub.cfg                             1
 127.736255646 = 137.155760128  boot/grub/i386-pc/core.img                     1
 114.174407959 = 122.593837056  boot/vmlinuz-3.13.0-129-generic                1
 108.466484070 = 116.465000448  boot/vmlinuz-3.2.0-126-generic                 1
 114.174407959 = 122.593837056  vmlinuz                                        1
 108.466484070 = 116.465000448  vmlinuz.old                                    1
 116.290035248 = 124.865474560  boot/initrd.img-3.13.0-129-generic             6
 114.360347748 = 122.793488384  boot/initrd.img-3.2.0-126-generic              3
 116.290035248 = 124.865474560  initrd.img                                     6
 114.360347748 = 122.793488384  initrd.img.old                                 3


ADDITIONAL INFORMATION :
=================== log of boot-info 2017-09-14__04h07 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info est exécuté en session installed (Ubuntu 16.04.3 LTS, xenial, Ubuntu-fr, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-129-generic root=UUID=c3039921-b671-4542-814d-7f9c9f498f68 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda5:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux
/dev/sda1:Windows Recovery Environment (loader):Windows:chain
/dev/sda2:Windows Vista (loader):Windows1:chain

=================== blkid:
/dev/sda1: LABEL="PQSERVICE" UUID="EAEE-EB49" TYPE="vfat" PARTUUID="b74620b6-01"
/dev/sda2: LABEL="Acer" UUID="9E224F27224F03AD" TYPE="ntfs" PARTUUID="b74620b6-02"
/dev/sda3: LABEL="DATA" UUID="C2EE3E9FEE3E8C23" TYPE="ntfs" PARTUUID="b74620b6-03"
/dev/sda5: UUID="c3039921-b671-4542-814d-7f9c9f498f68" TYPE="ext4" PARTUUID="b74620b6-05"
/dev/sda6: UUID="7defa292-1f49-4090-975e-47e76c38e1f6" TYPE="swap" PARTUUID="b74620b6-06"


1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 sep 14 01:04 grub.d
total 80
-rwxr-xr-x 1 root root  9791 jui 17 07:51 00_header
-rwxr-xr-x 1 root root  6258 mar 15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 jun 21 06:20 10_linux
-rwxr-xr-x 1 root root 11082 jun 21 06:20 20_linux_xen
-rwxr-xr-x 1 root root  1992 mar 12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 jui 17 07:51 30_os-prober
-rwxr-xr-x 1 root root  1418 jui 17 07:51 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct  1  2011 40_custom
-rwxr-xr-x 1 root root   216 jui 17 07:51 41_custom
-rw-r--r-- 1 root root   483 oct  1  2011 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda3.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA Hitachi HTS54321 (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type      File system     Flags
1      1049kB  10.5GB  10.5GB  primary   fat32           diag
2      10.5GB  85.3GB  74.8GB  primary   ntfs            boot
3      85.3GB  110GB   24.8GB  primary   ntfs
4      110GB   160GB   50.0GB  extended
5      110GB   158GB   47.9GB  logical   ext4
6      158GB   160GB   2070MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:160GB:scsi:512:512:msdos:ATA Hitachi HTS54321:;
1:1049kB:10.5GB:10.5GB:fat32::diag;
2:10.5GB:85.3GB:74.8GB:ntfs::boot;
3:85.3GB:110GB:24.8GB:ntfs::;
4:110GB:160GB:50.0GB:::;
5:110GB:158GB:47.9GB:ext4::;
6:158GB:160GB:2070MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        149,1G
sda1  part vfat     9,8G PQSERVICE
sda2  part ntfs    69,7G Acer
sda3  part ntfs    23,1G DATA
sda4  part            1K
sda5  part ext4    44,6G
sda6  part swap       2G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0         /mnt/boot-sav/sda3
sda4     1  0  0
sda5     1  0  0         /
sda6     1  0  0         [SWAP]
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=980716k,nr_inodes=212531,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=199248k,mode=755)
/dev/sda5 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=199248k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  adsp agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dsp dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages initctl input kmsg log mapper mcelog mem mixer mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 10 22 00  |.X.MSDOS5.0...".|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 80 38 01 07 27 00 00  00 00 00 00 02 00 00 00  |..8..'..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 49 eb ee ea 4e  4f 20 4e 41 4d 45 20 20  |..)I...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 4e 02 8a 56 40 b4 41  |{......|.N..V@.A|
00000070  bb aa 55 cd 13 72 10 81  fb 55 aa 75 0a f6 c1 01  |..U..r...U.u....|
00000080  74 05 fe 46 02 eb 2d 8a  56 40 b4 08 cd 13 73 05  |t..F..-.V@....s.|
00000090  b9 ff ff 8a f1 66 0f b6  c6 40 66 0f b6 d1 80 e2  |.....f...@f.....|
000000a0  3f f7 e2 86 cd c0 ed 06  41 66 0f b7 c9 66 f7 e1  |?.......Af...f..|
000000b0  66 89 46 f8 83 7e 16 00  75 38 83 7e 2a 00 77 32  |f.F..~..u8.~*.w2|
000000c0  66 8b 46 1c 66 83 c0 0c  bb 00 80 b9 01 00 e8 2b  |f.F.f..........+|
000000d0  00 e9 2c 03 a0 fa 7d b4  7d 8b f0 ac 84 c0 74 17  |..,...}.}.....t.|
000000e0  3c ff 74 09 b4 0e bb 07  00 cd 10 eb ee a0 fb 7d  |<.t............}|
000000f0  eb e5 a0 f9 7d eb e0 98  cd 16 cd 19 66 60 80 7e  |....}.......f`.~|
00000100  02 00 0f 84 20 00 66 6a  00 66 50 06 53 66 68 10  |.... .fj.fP.Sfh.|
00000110  00 01 00 b4 42 8a 56 40  8b f4 cd 13 66 58 66 58  |....B.V@....fXfX|
00000120  66 58 66 58 eb 33 66 3b  46 f8 72 03 f9 eb 2a 66  |fXfX.3f;F.r...*f|
00000130  33 d2 66 0f b7 4e 18 66  f7 f1 fe c2 8a ca 66 8b  |3.f..N.f......f.|
00000140  d0 66 c1 ea 10 f7 76 1a  86 d6 8a 56 40 8a e8 c0  |.f....v....V@...|
00000150  e4 06 0a cc b8 01 02 cd  13 66 61 0f 82 75 ff 81  |.........fa..u..|
00000160  c3 00 02 66 40 49 75 94  c3 42 4f 4f 54 4d 47 52  |...f@Iu..BOOTMGR|
00000170  20 20 20 20 00 00 00 00  00 00 00 00 00 00 00 00  |    ............|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 52 65  |..............Re|
000001b0  6d 6f 76 65 20 64 69 73  6b 73 20 6f 72 20 6f 74  |move disks or ot|
000001c0  68 65 72 20 6d 65 64 69  61 2e ff 0d 0a 44 69 73  |her media....Dis|
000001d0  6b 20 65 72 72 6f 72 ff  0d 0a 50 72 65 73 73 20  |k error...Press |
000001e0  61 6e 79 20 6b 65 79 20  74 6f 20 72 65 73 74 61  |any key to resta|
000001f0  72 74 0d 0a 00 00 00 00  00 ac cb d8 00 00 55 aa  |rt............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 38 01  |........?.....8.|
00000020  00 00 00 00 80 00 00 00  ff a7 b4 08 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  e6 6a 0d 00 00 00 00 00  |.........j......|
00000040  f6 00 00 00 01 00 00 00  ad 03 4f 22 27 4f 22 9e  |..........O"'O".|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 30 ed 09  |........?....0..|
00000020  00 00 00 00 80 00 80 00  40 95 e2 02 00 00 00 00  |........@.......|
00000030  00 00 0c 00 00 00 00 00  54 29 2e 00 00 00 00 00  |........T)......|
00000040  f6 00 00 00 01 00 00 00  23 8c 3e ee 9f 3e ee c2  |........#.>..>..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  958M     0  958M   0% /dev
tmpfs          tmpfs     195M  6.3M  189M   4% /run
/dev/sda5      ext4       44G   40G  2.6G  94% /
tmpfs          tmpfs     973M   27M  947M   3% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     973M     0  973M   0% /sys/fs/cgroup
cgmfs          tmpfs     100K     0  100K   0% /run/cgmanager/fs
tmpfs          tmpfs     195M   84K  195M   1% /run/user/1000
/dev/sda1      vfat      9.8G  7.4G  2.4G  76% /mnt/boot-sav/sda1
/dev/sda2      fuseblk    70G   59G   11G  85% /mnt/boot-sav/sda2
/dev/sda3      fuseblk    24G   15G  8.9G  62% /mnt/boot-sav/sda3

=================== fdisk -l:
Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xb74620b6

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sda1            2048  20482047  20480000  9.8G 27 Hidden NTFS WinRE
/dev/sda2  *     20482048 166539263 146057216 69.7G  7 HPFS/NTFS/exFAT
/dev/sda3       166539264 214943053  48403790 23.1G  7 HPFS/NTFS/exFAT
/dev/sda4       214943742 312580095  97636354 46.6G  5 Extended
/dev/sda5       214943744 308535295  93591552 44.6G 83 Linux
/dev/sda6       308537344 312580095   4042752    2G 82 Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Beaucoup d'interrogations donc, et merci du temps consacré,

Dernière modification par bibibel (Le 14/09/2017, à 03:14)

Hors ligne

#8 Le 19/09/2017, à 14:43

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Salut, et voila ou j'en suis, trop d'instabilité et réparation en tout genre, j'ai mis à jour le bios du portable, formater et  installer la dernière Ubuntu en 64 bits, installation sans problèmes majeur, et surtout plus de message concernant ces problèmes USB, d'ailleurs je n'ai que de l'usb2, et un connecteur esata + USB, je les ai tous testé et aucun ne présente de problème, peut être cet esata, mais n'ayant le cordon je l'ai commandé et attends sa réception pour tester le combo ...
Cependant le bureau de cette nouvelle install. n’apparaît qu'après 1,5 minutes chrono en main, ça me semble toujours trop lent, mais peut être est du à ma configuration portable, ce n'est pas un foudre de guerre, je lui ai juste ajouter une barrette en ddr2 (512mo), qui traînait dans mon fatras. Voici quand même une image des programmes lancés au démarrage, peut être y a t'il qque chose à faire de ce coté la ?

mini_847041Capturedu20170919140530.png
mini_163412Capturedu20170919140637.png

Le dernier boot-info :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 17Sep2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   307,484,671   307,482,624  83 Linux
/dev/sda2         307,486,718   312,580,095     5,093,378   5 Extended
/dev/sda5         307,486,720   312,580,095     5,093,376  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        459ec0bb-1280-479b-b618-9263d03ab22e   ext4       
/dev/sda5        0af55413-ee4f-472b-ac96-def8a1f9c819   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Sep 19 11:41 ata-HL-DT-ST_DVDRAM_GSA-T50N_K01886J5859 -> ../../sr0
lrwxrwxrwx 1 root root  9 Sep 19 12:05 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 19 12:05 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 19 12:05 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 19 12:05 ata-Hitachi_HTS543216L9A300_080912FB2200LCD97WLA-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Sep 19 12:05 wwn-0x5000cca568d24c76 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 19 12:05 wwn-0x5000cca568d24c76-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 19 12:05 wwn-0x5000cca568d24c76-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 19 12:05 wwn-0x5000cca568d24c76-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
else
  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_BE
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-459ec0bb-1280-479b-b618-9263d03ab22e' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
	else
	  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
	fi
        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-35-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-459ec0bb-1280-479b-b618-9263d03ab22e' {
	menuentry 'Ubuntu, avec Linux 4.10.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-35-generic-advanced-459ec0bb-1280-479b-b618-9263d03ab22e' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
		else
		  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
		fi
		echo	'Chargement de Linux 4.10.0-35-generic…'
	        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-35-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-35-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-35-generic-init-upstart-459ec0bb-1280-479b-b618-9263d03ab22e' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
		else
		  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
		fi
		echo	'Chargement de Linux 4.10.0-35-generic…'
	        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-35-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-35-generic-recovery-459ec0bb-1280-479b-b618-9263d03ab22e' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
		else
		  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
		fi
		echo	'Chargement de Linux 4.10.0-35-generic…'
	        linux	/boot/vmlinuz-4.10.0-35-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-35-generic
	}
	menuentry 'Ubuntu, avec Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-459ec0bb-1280-479b-b618-9263d03ab22e' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
		else
		  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-459ec0bb-1280-479b-b618-9263d03ab22e' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
		else
		  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-459ec0bb-1280-479b-b618-9263d03ab22e' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
		else
		  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
	else
	  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  459ec0bb-1280-479b-b618-9263d03ab22e
	else
	  search --no-floppy --fs-uuid --set=root 459ec0bb-1280-479b-b618-9263d03ab22e
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=459ec0bb-1280-479b-b618-9263d03ab22e /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=0af55413-ee4f-472b-ac96-def8a1f9c819 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  84.218566895 = 90.428997632   boot/grub/grub.cfg                             1
  64.366157532 = 69.112635392   boot/grub/i386-pc/core.img                     1
   1.480522156 = 1.589698560    boot/vmlinuz-4.10.0-28-generic                 2
   3.632869720 = 3.900764160    boot/vmlinuz-4.10.0-35-generic                 1
   3.632869720 = 3.900764160    vmlinuz                                        1
   1.480522156 = 1.589698560    vmlinuz.old                                    2
  84.218505859 = 90.428932096   boot/initrd.img-4.10.0-28-generic              3
  10.137706757 = 10.885279744   boot/initrd.img-4.10.0-35-generic              4
  10.137706757 = 10.885279744   initrd.img                                     4
  84.218505859 = 90.428932096   initrd.img.old                                 3

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000  37 8b 3c 1f 69 e2 cd 0a  f7 58 9e 39 ae 1e de 76  |7.<.i....X.9...v|
00000010  60 1c b2 aa f0 c0 02 01  00 8c e0 d7 eb 5f ec 2d  |`............_.-|
00000020  fb 06 7e ca 3f 13 ff 00  66 9d 0f e2 d7 c4 af 02  |..~.?...f.......|
00000030  6a 1e 25 d7 ff 00 b4 af  20 bb 78 75 7b 98 23 92  |j.%..... .xu{.#.|
00000040  28 59 be f2 a3 00 4e d1  8c 0e 78 19 e7 9a bc 5c  |(Y....N...x....\|
00000050  e3 47 30 a1 42 9c 6f ce  ae 3c 9d d5 c6 70 a6 37  |.G0.B.o..<...p.7|
00000060  38 c6 3b 4a 8c ad a7 cc  e7 23 f8 a9 fb 01 78 7f  |8.;J.....#....x.|
00000070  c4 57 1a 47 85 ff 00 e0  99 bf 10 7c 59 a5 e9 de  |.W.G.......|Y...|
00000080  28 1e 13 7f 1a 5d 45 24  96 2f 36 fd 85 95 9d 98  |(....]E$./6.....|
00000090  30 ef 86 c7 61 c1 c5 7d  cb 1c bf b3 97 86 7e 30  |0...a..}......~0|
000000a0  f8 af e1 17 84 3f 62 9f  87 90 ea 5e 1d f8 52 bf  |.....?b....^..R.|
000000b0  12 34 f9 2e 7c 37 64 2e  ae a6 92 30 d1 5b 6d 94  |.4..|7d....0.[m.|
000000c0  01 bb 2c 03 6e 6e 30 71  92 71 5b d6 a7 52 8e 21  |..,.nn0q.q[..R.!|
000000d0  d1 9c 52 f4 3c fa 6f eb  19 6d 3c c2 84 f9 b9 95  |..R.<.o..m<.....|
000000e0  ed bb fb 8e 57 f6 73 fd  a5 75 5d 73 e2 6e b5 f0  |....W.s..u]s.n..|
000000f0  ef f6 80 fd 8f fe 19 7c  07 7b 5f 0d 6a 1e 2b f0  |.......|.{_.j.+.|
00000100  a4 3a 57 85 ec cc b7 50  5a c4 d2 82 65 23 6e e6  |.:W....PZ...e#n.|
00000110  50 a7 66 32 77 02 a4 e6  bc fb 4b fd aa 3f 6f 2d  |P.f2w.....K..?o-|
00000120  37 45 b3 fd a3 75 3f 07  7c 34 d2 7f 65 8b ef 10  |7E...u?.|4..e...|
00000130  b6 8f a3 f8 49 34 2b 64  d5 56 cd 2e be cf e7 97  |....I4+d.V......|
00000140  11 96 40 70 cc 01 ec 79  38 03 35 52 95 78 54 9e  |..@p...y8.5R.xT.|
00000150  1d af 7b a7 9a 34 a5 5b  09 52 a5 1c 4b 9d e9 35  |..{..4.[.R..K..5|
00000160  af 46 9f 6d 4f b3 af 7e  2b 7c 62 d7 3c 55 fb 46  |.F.mO..~+|b.<U.F|
00000170  58 e8 de 2b b6 b7 d1 bc  2d f0 b3 4f f1 97 80 e1  |X..+....-..O....|
00000180  b4 d3 51 1e d1 ee 11 5d  99 f0 09 20 2e e1 8c f0  |..Q....]... ....|
00000190  41 af 04 fd a4 fc 55 fb  58 f8 63 f6 55 f8 55 fb  |A.....U.X.c.U.U.|
000001a0  47 78 07 e2 de a3 6b a8  68 7a 04 7e 21 f1 be 9c  |Gx....k.hz.~!...|
000001b0  5a 28 d6 fe 25 c9 91 5b  cc 56 42 ef 92 54 00 fe  |Z(..%..[.VB..T..|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 b8 4d 00 00 00  |............M...|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-info 2017-09-19__12h05 ===================
boot-info version : 4ppa42
boot-sav version : 4ppa42
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa42
boot-info is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-35-generic root=UUID=459ec0bb-1280-479b-b618-9263d03ab22e ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="459ec0bb-1280-479b-b618-9263d03ab22e" TYPE="ext4" PARTUUID="1ee11239-01"
/dev/sda5: UUID="0af55413-ee4f-472b-ac96-def8a1f9c819" TYPE="swap" PARTUUID="1ee11239-05"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 aoû  1 13:28 grub.d
total 80
-rwxr-xr-x 1 root root  9791 jun 21 06:11 00_header
-rwxr-xr-x 1 root root  6258 mar 15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 jun 21 06:11 10_linux
-rwxr-xr-x 1 root root 11082 jun 21 06:11 20_linux_xen
-rwxr-xr-x 1 root root  1992 jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 jun 21 06:11 30_os-prober
-rwxr-xr-x 1 root root  1418 jun 21 06:11 30_uefi-firmware
-rwxr-xr-x 1 root root   214 jun 21 06:11 40_custom
-rwxr-xr-x 1 root root   216 jun 21 06:11 41_custom
-rw-r--r-- 1 root root   483 jun 21 06:11 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA Hitachi HTS54321 (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End    Size    Type      File system     Flags
1      1049kB  157GB  157GB   primary   ext4            boot
2      157GB   160GB  2608MB  extended
5      157GB   160GB  2608MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:160GB:scsi:512:512:msdos:ATA Hitachi HTS54321:;
1:1049kB:157GB:157GB:ext4::boot;
2:157GB:160GB:2608MB:::;
5:157GB:160GB:2608MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sr0   rom          1024M
sda   disk        149,1G
sda2  part            1K
sda5  part swap     2,4G
sda1  part ext4   146,6G

KNAME ROTA RO RM STATE   MOUNTPOINT
sr0      1  0  1 running
sda      1  0  0 running
sda2     1  0  0
sda5     1  0  0         [SWAP]
sda1     1  0  0         /


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1222752k,nr_inodes=305688,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=249004k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1575)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=249004k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.2G     0  1.2G   0% /dev
tmpfs          tmpfs     244M  4.4M  239M   2% /run
/dev/sda1      ext4      145G  5.0G  132G   4% /
tmpfs          tmpfs     1.2G   26M  1.2G   3% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.2G     0  1.2G   0% /sys/fs/cgroup
tmpfs          tmpfs     244M   64K  244M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1ee11239

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 307484671 307482624 146.6G 83 Linux
/dev/sda2       307486718 312580095   5093378   2.4G  5 Extended
/dev/sda5       307486720 312580095   5093376   2.4G 82 Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Merci déjà de vos retour,


Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix et hostingpics le permettent).

Dernière modification par cqfd93 (Le 19/09/2017, à 15:04)

Hors ligne

#9 Le 19/09/2017, à 15:35

moko138

Re : Lenteur après passage de la 12.04 à la 14.04

Oui, tu as beaucoup de services lancés au démarrage !
  - -
Le fstab ne contient pas de partition exotique qui expliquerait, à défaut d'option nofail, la lenteur du démarrage.
  - -

installer la dernière Ubuntu en 64 bits

Une installation fraîche est en effet le plus sûr.

je lui ai juste ajouter une barrette en ddr2 (512mo)

Que donnent

top | head -15
cat /proc/sys/vm/swappiness
cat /proc/cpuinfo

?

Dernière modification par moko138 (Le 19/09/2017, à 15:38)


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#10 Le 19/09/2017, à 15:42

moko138

Re : Lenteur après passage de la 12.04 à la 14.04

J'ai édité le message précédent.

Montre aussi

lsb_release -d; printenv GDMSESSION ; uname -mr

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#11 Le 19/09/2017, à 23:07

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Tout d'abord, aux modérateurs, désolé pour la taille des images, intégrées dans la précipitation, et merci du lien libre que j'ai d'ailleurs croisé et recherché en vain par la suite.

moko138 a écrit :

Que donnent

top | head -15

Donne :

anne@anne-TravelMate-5730:~$ top | head -15

top - 23:45:07 up 8 min,  1 user,  load average: 0,10, 0,52, 0,40
Tâches: 194 total,   1 en cours, 193 en veille,   0 arrêté,   0 zombie
%Cpu(s):  8,0 ut,  2,7 sy,  0,2 ni, 81,3 id,  7,8 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem :  2490028 total,   690748 libr,  1026720 util,   772560 tamp/cache
KiB Éch:  2546684 total,  2546684 libr,        0 util.  1158572 dispo Mem 

  PID UTIL.     PR  NI    VIRT    RES    SHR S  %CPU %MEM    TEMPS+ COM.        
 1061 anne      20   0  354048   8512   5680 S   6,2  0,3   0:00.62 ibus-daemon 
 2351 anne      20   0   48996   3912   3244 R   6,2  0,2   0:00.02 top         
    1 root      20   0  185076   5728   4004 S   0,0  0,2   0:02.42 systemd     
    2 root      20   0       0      0      0 S   0,0  0,0   0:00.00 kthreadd    
    4 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/0:+ 
    6 root      20   0       0      0      0 S   0,0  0,0   0:00.02 ksoftirqd/0 
    7 root      20   0       0      0      0 S   0,0  0,0   0:00.24 rcu_sched   
    8 root      20   0       0      0      0 S   0,0  0,0   0:00.00 rcu_bh      
anne@anne-TravelMate-5730:~$
cat /proc/sys/vm/swappiness

Donne:

anne@anne-TravelMate-5730:~$ cat /proc/sys/vm/swappiness
60
cat /pro/cpuinfo

Donne :

anne@anne-TravelMate-5730:~$ cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 Duo CPU     T5870  @ 2.00GHz
stepping	: 13
microcode	: 0xa4
cpu MHz		: 800.000
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm ida
bugs		:
bogomips	: 3990.24
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 Duo CPU     T5870  @ 2.00GHz
stepping	: 13
microcode	: 0xa4
cpu MHz		: 800.000
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 1
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm ida
bugs		:
bogomips	: 3990.24
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

anne@anne-TravelMate-5730:~$ 
lsb_release -d; printenv GDMSESSION ; uname -mr

Donne:

anne@anne-TravelMate-5730:~$ lsb_release -d; printenv GDMSESSION ; uname -mr
Description:	Ubuntu 16.04.3 LTS
ubuntu
4.10.0-35-generic x86_64
anne@anne-TravelMate-5730:~$ 

Mon processeur acceptant les instructions 64bits au lu de la doc Intel, j'ai donc installé cette version ..
édit: 2,5 gigas de ram au total, et l'arrêt du portable se fait en 5 secondes.

.... et merci du suivi moko smile

Dernière modification par bibibel (Le 20/09/2017, à 00:11)

Hors ligne

#12 Le 20/09/2017, à 05:16

moko138

Re : Lenteur après passage de la 12.04 à la 14.04

Pour les vignettes, regarde
1455675674.jpg
et repère la ligne :

Insérer la miniature dans un forum :

sans "(avec lien direct vers l'image)".
  - -

RAM :

KiB Mem :  2490028 total

1) Perso, avec 2,5 Gio de ram, je ferais pour ta copine une installation fraîche de la variante Xubuntu...

2) ...Dans sa version 16.04.1, puisque le matos n'est pas très récent.

3) Ensuite, j'abaisserais le swappiness aux alentours de 5 :

echo vm.swappiness=5 | sudo tee -a /etc/sysctl.conf

suivi d'un redémarrage.

4) Et j'éviterais de lancer dès le démarrage des services qui ne sont pas encore utiles - à examiner selon les besoins de ta copine.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#13 Le 20/09/2017, à 12:08

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Merci de tes conseils moko. C'est dommage, une fois sur le bureau, la navigation était agréable, mais je vais installer cette variante plus légère, j'aurais du poser la question plus tôt, ça m'aurait fait gagné du temps, mais point positif, le monde linuxien est à présent moins obscur smile
Pour les besoins de la copine, c'est surtout de la navigation web, de la bureautique, messagerie, et un peu d’images, je pense que cette distri propose tout cela dès l'origine.
J'hésite à taguer cette discussion comme résolue, je pense revenir vers toi/vous dès l'installation effectuée, au cas zou ...
++

Hors ligne

#14 Le 20/09/2017, à 12:23

moko138

Re : Lenteur après passage de la 12.04 à la 14.04

Pour les besoins de la copine, c'est surtout de la navigation web, de la bureautique, messagerie, et un peu d’images, je pense que cette distri propose tout cela dès l'origine.

Oui, toutes les variantes de *buntu proposent tout cela dès l'origine.

Pense à lui installer aussi le paquet
xubuntu-restricted-extras
(s'il porte encore ce nom).


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#15 Le 21/09/2017, à 21:20

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Re, j'ai installé cette version, mais pas de changement, cette fois c'est 2 minutes pour l'apparition du bureau ...  J'ai installé Xubuntu à l'aide d'une clé USB (sous rufus) et lors du boot, il m'affiche tjr ces erreurs USB, puis se fige et aucune solution. Je change la clé pour le port USB adjacent et rebelote, mais au bout d'un moment l'installation se fait.
Plusieurs questions :
- Cette lenteur d'installation du bureau n'est elle pas due à ce problème d'usb ? et si oui, est-il possible d'éviter ce check matériel (qui ne pose d'ailleurs aucun problème en lecture-écriture) en désactivant celle-ci ?
- Le thème est léger, j'aurais aimé le personnaliser, j'ai suivi ce tuto :

Ajouter des thèmes

À partir d'Xfce 4.10, après avoir téléchargé le thème de votre choix, glissez-déposez l'archive contenant le thème dans la liste des thèmes affichés dans l'onglet "Styles" de l'outil "Apparence", disponible dans le Gestionnaire de paramètres. XFCE tentera alors d'installer le thème automatiquement et devrait le rajouter dans la liste. Cette astuce est aussi valable pour les thèmes d'icônes.

Pour les versions antérieures d'Xfce il va falloir placer le fichier décompressé dans le répertoire ~/.themes dans votre dossier personnel:

    Décompressez votre dossier,
    Affichez les fichiers cachés, par exemple en appuyant sur les touches ctrl+h,
    Recherchez le dossier .themes et copiez-y votre nouveau thème. Le dossier .themes est à créer s'il n'existe pas.

Pour sélectionner le thème, allez dans le menu des paramètres > Apparence > Style, et sélectionner le thème.

Mais aucun nouveau style n’apparaît ...

- Je ne peux plus maintenant accéder par la touche F2 aux réglages du BIOS, c'est le grub qui apparaît !

Je me demande si je ne vais pas réinstaller la version Ubuntu, j'avais les mêmes soucis de lenteur sans les inconvénients cités ...

Hors ligne

#16 Le 22/09/2017, à 10:25

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Bizarre, je reçois une notification par mail d'une réponse à la discussion par Clintonhib à 7h40', je clique sur le lien :
http://forum.ubuntu-fr.org/viewtopic.ph … #p21799206
Mais ça me renvoie vers :

Erreur. Le lien que vous avez suivi est incorrect ou périmé.

et pas dans la bonne section ...

Hors ligne

#17 Le 22/09/2017, à 10:30

jack

Re : Lenteur après passage de la 12.04 à la 14.04

Bonjour
C’est un spam qui à était supprimé

Hors ligne

#18 Le 22/09/2017, à 10:31

nam1962

Re : Lenteur après passage de la 12.04 à la 14.04

Si tu veux optimiser ta Xubuntu, voici un petit [url=[modéré : pas d’auto-pub, merci]-mon-optimisation-personnalisation-xubuntu-et-autres-variantes/]lien[/url].

Quelque soit ta variante, règle la swappiness:

echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-sysctl.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-sysctl.conf
sudo sysctl -p /etc/sysctl.d/99-sysctl.conf

[ Modéré ]

Hors ligne

#19 Le 22/09/2017, à 10:38

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Ah d'accord ! merci jack wink
Allez je tente ça nam, merci !

Hors ligne

#20 Le 22/09/2017, à 12:45

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Voila la réponse aux commande de nam, ceci-dit moko m'avait déjà proposé de régler le swap (voir + haut) mais moins de ligne de commande, donc j'ai essayé, plus y en a mieux c'est je me disais smile

anne@anne-TravelMate-5730:~$ echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-sysctl.conf
[sudo] Mot de passe de anne : 
vm.swappiness=5
anne@anne-TravelMate-5730:~$ echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-sysctl.conf
vm.vfs_cache_pressure=50
anne@anne-TravelMate-5730:~$ sudo sysctl -p /etc/sysctl.d/99-sysctl.conf
vm.swappiness = 5
vm.vfs_cache_pressure = 50
anne@anne-TravelMate-5730:~$ 

Rien n'a vraiment changé, j'ai gagné 5 secondes avant l'affichage du bureau, par contre je ne sais si c'est tes commandes, mais j'ai de nouveau accès au bios en F2, et pu remettre mon Disque-dur en premier, d’où peut être ce gain de 5".
L'activité du disque, chargement pilotes et appli ne démarre que vers la minute 30 ...
Je lisais ton tuto, et me suis dirigé sur la page ou tu conseille les choix de versions en fonction de la ram disponible, j'aurais peut être du installé la 32 bits de ce Xubuntu avec 2,5 Gigas de ram ?

Dernière modification par bibibel (Le 22/09/2017, à 12:48)

Hors ligne

#21 Le 22/09/2017, à 13:38

nam1962

Re : Lenteur après passage de la 12.04 à la 14.04

Tu es un peu au point limite (même si je mets 3Go), par contre avec la 32bit, tu n'auras pas accès à teamviewer, Skype et quelques autres softs.
Maintenant, c'est surtout le confort d'utilisation qui est à prendre en compte, le démarrage on s'en fiche un peu (d'autant, qu'il vaut mieux laisser son ordi allumé, les démarrages fatiguent le matériel, à force)


[ Modéré ]

Hors ligne

#22 Le 22/09/2017, à 14:16

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Tu as raison, le confort et la navigation, une fois le bureau installé est tout à fait acceptable, je vais maintenant m'attaquer à sa personnalisation, j'ai lu ton tuto en diagonale, il va falloir que je m'applique, merci wink

Hors ligne

#23 Le 22/09/2017, à 14:18

inbox

Re : Lenteur après passage de la 12.04 à la 14.04

Salut,

Quel est le composant graphique de ce PC ?

lspci

Sous Xubuntu, tu peux désactiver le compositeur graphique pour alléger l'affichage :

Doc personnaliser Xubuntu a écrit :

Normalement activé par défaut, si vous voulez le désactiver, cliquez sur Peaufinage des fenêtres. Puis dans l'onglet Compositeur cochez la case désactiver le compositeur d'affichage.

Le fait de désactiver ce compositeur peut provoquer des déchirures d'image, surtout sur les vidéos. Dans ce cas, il faut installer Compton et le lancer automatiquement à l'ouverture de session.

A+

Dernière modification par inbox (Le 22/09/2017, à 15:40)


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#24 Le 22/09/2017, à 14:38

bibibel

Re : Lenteur après passage de la 12.04 à la 14.04

Salut inbox, bin c'est pas le top, parfois quelques freeze en défilant les pages sous Firefox, mais léger ..., lecture vidéo sous yt sans problème.

anne@anne-TravelMate-5730:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
03:00.0 Network controller: Intel Corporation WiFi Link 5100
0d:06.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 01)
0d:06.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02)
0d:06.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 03)
anne@anne-TravelMate-5730:~$ 

Dernière modification par bibibel (Le 22/09/2017, à 14:47)

Hors ligne

#25 Le 22/09/2017, à 15:00

nam1962

Re : Lenteur après passage de la 12.04 à la 14.04

Firefox, tu pourras aussi l'optimiser, déjà en limitant les scripts avec ublock origin et en supprimant les cookies au fil de l'eau avec cookies autodelete.
Ainsi qu'en limitant le cache (histoire de ne pas saturer ta RAM) :
1506088837.png


[ Modéré ]

Hors ligne