Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/08/2017, à 16:30

thx199

Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Bonjour a tous

Comme indiqué dans le titre, je ne parviens pas à utilisé mon scanner en wifi ( c'est en fait une imprimante multifonction) .
c'est une Brother MFC-6490CW 
Je suis sous Ubuntu 14.04 LTS
l'impression fonctionne parfaitement, c'est quand je veux utilisé xsane ou simple-scan que ça pause problème ...
simple-scan me dit ça:

échec de la numérisation
impossible de se connecter au périphérique de numérisation.

et Xsane me dit ça:

erreur d'ouverture du périphérique brother3;net1;dev0: paramètre non valable.

La commande scanimage -L me renvoie ceci :

moi@moi-System:~$ scanimage -L
device `brother3:net1;dev0' is a Brother MFC-6490CW MON-SCAN

et la commande brscan-skey -l renvoie ceci:

brscan-skey -l

 MON-SCAN          : brother3:net1;dev0  : 192.168.000.099      Not responded

jusque la j'ai installer les driver LPR et CUP pour l'impression et brscan3 pour le scan, en suivant la procédure indiqué sur le site Brother .
j'ai aussi suivi les indication de la doc-ubuntu.fr ( ici)
j'ai verifier la présence d'une ligne type brother3 dans le fichier /etc/sane.d/dll.conf
Dans le fichier /etc/default/saned  j' ai changer no pour yes.
# Set to yes to start saned                                                     
RUN=yes

J'avoue que je ne sais plus trop quoi faire, j'ai chercher un peu partout sur google  et votre forum, mais mes connaissance et compétence sont limitée, et je n'ai pas envie de foutre le b***** dans mes fichier lol .

voila j’espère que vous saurez m'aider.

merci

Dernière modification par thx199 (Le 30/08/2017, à 00:48)

Hors ligne

#2 Le 16/08/2017, à 16:49

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Tu as le même problème que pas mal de monde ces temps-ci.

Donne le retour de :

brsaneconfig3 -q
brsaneconfig3 -d
cat /usr/local/Brother/sane/brsanenetdevice3.cfg

Hors ligne

#3 Le 17/08/2017, à 20:33

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

abelthorne a écrit :

Tu as le même problème que pas mal de monde ces temps-ci.

c' est l’impression que j'ai eu en lisant les forums ... roll
en tout cas merci d’essayer avec moi.

voici le retour des commandes:

brsaneconfig3 -q :

moi@moi-System:~$ brsaneconfig3 -q
  0 "DCP-J715W"
  1 "MFC-J615W"
  2 "DCP-J315W"
  3 "MFC-J265W"
  4 "MFC-J630W"
  5 "DCP-197C"
  6 "DCP-377CW"
  7 "MFC-257CW"
  8 "DCP-195C"
  9 "DCP-365CN"
 10 "DCP-375CW"
 11 "DCP-395CN"
 12 "MFC-295CN"
 13 "MFC-495CW"
 14 "MFC-795CW"
 15 "MFC-255CW"
 16 "DCP-390CN"
 17 "DCP-595CN"
 18 "MFC-495CN"
 19 "MFC-675CD"
 20 "MFC-695CDN"
 21 "MFC-735CD"
 22 "MFC-935CDN"
 23 "DCP-8070D"
 24 "MFC-8370DN"
 25 "MFC-8380DN"
 26 "MFC-8680DN"
 27 "MFC-8880DN"
 28 "MFC-9120CN"
 29 "MFC-9320CW"
 30 "MFC-9010CN"
 31 "DCP-9010CN"
 32 "DCP-9040CN"
 33 "MFC-9440CN"
 34 "DCP-9045CDN"
 35 "MFC-9840CDW"
 36 "MFC-9640CW"
 37 "MFC-9450CDN"
 38 "DCP-9042CDN"
 39 "DCP-J715N"
 40 "MFC-J615N"
 41 "DCP-J515N"
 42 "MFC-J950DN"
 43 "MFC-J700D"
 44 "MFC-J800D"
 45 "MFC-J850DN"
 46 "MFC-J410W"
 47 "MFC-J270W"
 48 "MFC-J855DN"
 49 "MFC-J805D"
 50 "DCP-373CW"
 51 "MFC-253CW"
 52 "DCP-J125"
 53 "DCP-J515W"
 54 "MFC-J220"
 55 "MFC-J410"
 56 "MFC-J415W"
 57 "MFC-5895CW"
 58 "DCP-145C"
 59 "DCP-165C"
 60 "DCP-185C"
 61 "DCP-385C"
 62 "DCP-585CW"
 63 "DCP-535CN"
 64 "MFC-250C"
 65 "MFC-290C"
 66 "MFC-490CW"
 67 "MFC-490CN"
 68 "MFC-790CW"
 69 "MFC-990CW"
 70 "MFC-670CD"
 71 "MFC-930CDN"
 72 "MFC-5490CN"
 73 "MFC-5890CN"
 74 "DCP-6690CW"
 75 "MFC-6490CW"
 76 "MFC-6490CN"
 77 "MFC-6890CDW"
 78 "MFC-6890CN"
 79 "DCP-163C"
 80 "DCP-167C"
 81 "DCP-383C"
 82 "DCP-387C"
 83 "MFC-297C"
 84 "MFC-7450"
 85 "MFC-7840N"
 86 "MFC-7320"
 87 "DCP-7030"
 88 "DCP-7040"
 89 "DCP-7045N"
 90 "MFC-7340"
 91 "MFC-7440N"
 92 "MFC-7840W"
 93 
 94 "DCP-8080DN"
 95 "DCP-8085DN"
 96 "MFC-8480DN"
 97 "MFC-8890DW"

Devices on network
  0 MON-SCAN            "MFC-6490CW"        I:192.168.000.099
moi@moi-System:~$ brsaneconfig3 -qbrsaneconfig3 -qbrsaneconfig3 -q^C
moi@moi-System:~$

brsaneconfig3 -d:

moi@moi-System:~$ brsaneconfig3 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=767854c9-655d-4a53-9263-070e120345d7 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=af0ab0e3-1637-45d5-9d20-b5d3f3c12535 none            swap    sw              0       0
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x046d/0x0825 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc512 at 008:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 008:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 007:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x0402/0x5635 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x062a/0x4101 at 005:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: impossible d'accéder à /proc/bus/usb: Aucun fichier ou dossier de ce type
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Aucun fichier ou dossier de ce type
-----------------------------
scanimage -L
device `brother3:net1;dev0' is a Brother MFC-6490CW MON-SCAN
-----------------------------
-----------------------------
/usr/local/Brother/sane/brsanenetdevice3.cfg:
DEVICE=MON-SCAN , "MFC-6490CW" , 0x4f9:0x1f3 , IP-ADDRESS=192.168.000.099 

-----------------------------
/usr/local/Brother/sane/Brsane3.ini:
[Support Model]


0x0206,14,2,"DCP-145C"
0x0204,14,2,"DCP-165C"
0x0205,13,2,"DCP-185C"
0x0201,14,2,"DCP-385C"
0x0200,14,2,"DCP-585CW"
0x01ff,13,2,"DCP-535CN"
0x01fe,14,1,"MFC-250C"
0x01fd,13,1,"MFC-290C"
0x01fb,13,1,"MFC-490CW"
0x01fa,13,1,"MFC-490CN"
0x01f9,13,1,"MFC-790CW"
0x01f8,13,1,"MFC-990CW"
0x01f7,14,1,"MFC-670CD"
0x01f6,13,1,"MFC-930CDN"
0x01f5,13,1,"MFC-5490CN"
0x01f4,13,1,"MFC-5890CN"
0x01f1,13,2,"DCP-6690CW"
0x01f3,13,1,"MFC-6490CW"
0x01f2,13,1,"MFC-6490CN"

0x01f0,13,1,"MFC-6890CDW"
0x01ef,13,1,"MFC-6890CN"

0x0207,14,2,"DCP-163C"
0x0208,14,2,"DCP-167C"
0x0203,14,2,"DCP-383C"
0x0202,14,2,"DCP-387C"
0x01fc,13,1,"MFC-297C"

0x01ee,1,1,"MFC-7450",131,4
0x01ed,1,1,"MFC-7840N",131,4
0x01eb,1,1,"MFC-7320",131,4
0x01ea,2,2,"DCP-7030",131,4
0x01e9,1,2,"DCP-7040",131,4
0x01e8,1,2,"DCP-7045N",131,4
0x01e7,1,1,"MFC-7340",131,4
0x01e6,1,1,"MFC-7440N",131,4
0x01e5,1,1,"MFC-7840W",131,4
	


0x0218,17,1,"DCP-8080DN",133,4
0x021f,117,1,"DCP-8085DN",133,4


0x0217,17,1,"MFC-8480DN",133,4

0x0215,117,1,"MFC-8890DW",133,4





[ModelTypeName]
1=MFC Scanner
2=DCP Scanner

[Driver]
scanfast24=0
NoUseCM=0
compression=1
Inqueue=32000
LogFile=0
xshift_c=0


-----------------------------
/usr/local/Brother/sane/models3/ext4.ini:
[Support Model]

0x0257,13,2,"DCP-J715W"
0x025d,13,1,"MFC-J615W"

0x0254,14,2,"DCP-J315W"
0x025B,14,1,"MFC-J265W"
0x026B,13,1,"MFC-J630W"
-----------------------------
/usr/local/Brother/sane/models3/ext2.ini:
[Support Model]

0x23e,14,2,"DCP-197C"
0x235,14,2,"DCP-377CW"
0x23a,14,1,"MFC-257CW"

-----------------------------
/usr/local/Brother/sane/models3/ext1.ini:
[Support Model]

0x0222,14,2,"DCP-195C"

0x0223,14,2,"DCP-365CN"
0x0224,14,2,"DCP-375CW"
0x0225,14,2,"DCP-395CN"

0x0229,13,1,"MFC-295CN"
0x022a,13,1,"MFC-495CW"
0x022c,13,1,"MFC-795CW"
0x0228,14,1,"MFC-255CW"
0x0236,14,2,"DCP-390CN"
0x0227,13,2,"DCP-595CN"
0x022b,13,1,"MFC-495CN"
0x022d,14,1,"MFC-675CD"
0x022e,14,1,"MFC-695CDN"
0x022f,14,1,"MFC-735CD"
0x0230,13,1,"MFC-935CDN"

0x021b,17,2,"DCP-8070D",133,4
0x021a,17,1,"MFC-8370DN",133,4
0x0219,117,1,"MFC-8380DN",133,4
0x023f,117,1,"MFC-8680DN",133,4

0x0216,117,1,"MFC-8880DN",133,4


0x021d,17,1,"MFC-9120CN"
0x021c,17,1,"MFC-9320CW"
0x0220,17,1,"MFC-9010CN"
0x021e,17,2,"DCP-9010CN"

-----------------------------
/usr/local/Brother/sane/models3/ext3.ini:
[Support Model]
0x01c9,  17,2,"DCP-9040CN",133,4
0x01ca,  17,1,"MFC-9440CN",133,4
0x01cb, 117,2,"DCP-9045CDN",133,4
0x01cc, 117,1,"MFC-9840CDW",133,4
0x01ec, 117,1,"MFC-9640CW",133,4

0x020d ,17,1,"MFC-9450CDN",133,4
0x020c ,17,2,"DCP-9042CDN",133,4

-----------------------------
/usr/local/Brother/sane/models3/ext5.ini:
[Support Model]

0x0258,13,2,"DCP-J715N"
0x025e,13,1,"MFC-J615N"
0x0256,14,2,"DCP-J515N"


0x240,13,1,"MFC-J950DN"
0x25f,14,1,"MFC-J700D"
0x260,14,1,"MFC-J800D"
0x261,14,1,"MFC-J850DN"

0x0278,13,1,"MFC-J410W"
0x026f,14,1,"MFC-J270W"
0x026e,14,1,"MFC-J855DN"
0x026d,14,1,"MFC-J805D"

0x234,14,2,"DCP-373CW"
0x239,14,1,"MFC-253CW"
0x253,14,2,"DCP-J125"
0x255,14,2,"DCP-J515W"
0x259,14,1,"MFC-J220"
0x25a,13,1,"MFC-J410"
0x25c,13,1,"MFC-J415W"


0x0276,13,1,"MFC-5895CW"
-----------------------------
MODEL:"DCP-J715W",ID:0x4f9:0x257,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J615W",ID:0x4f9:0x25d,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-J315W",ID:0x4f9:0x254,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J265W",ID:0x4f9:0x25b,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J630W",ID:0x4f9:0x26b,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-197C",ID:0x4f9:0x23e,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-377CW",ID:0x4f9:0x235,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-257CW",ID:0x4f9:0x23a,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-195C",ID:0x4f9:0x222,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-365CN",ID:0x4f9:0x223,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-375CW",ID:0x4f9:0x224,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-395CN",ID:0x4f9:0x225,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-295CN",ID:0x4f9:0x229,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-495CW",ID:0x4f9:0x22a,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-795CW",ID:0x4f9:0x22c,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-255CW",ID:0x4f9:0x228,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-390CN",ID:0x4f9:0x236,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-595CN",ID:0x4f9:0x227,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-495CN",ID:0x4f9:0x22b,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-675CD",ID:0x4f9:0x22d,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-695CDN",ID:0x4f9:0x22e,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-735CD",ID:0x4f9:0x22f,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-935CDN",ID:0x4f9:0x230,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-8070D",ID:0x4f9:0x21b,TYPE:17,2,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8370DN",ID:0x4f9:0x21a,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8380DN",ID:0x4f9:0x219,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8680DN",ID:0x4f9:0x23f,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8880DN",ID:0x4f9:0x216,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-9120CN",ID:0x4f9:0x21d,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9320CW",ID:0x4f9:0x21c,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9010CN",ID:0x4f9:0x220,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-9010CN",ID:0x4f9:0x21e,TYPE:17,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-9040CN",ID:0x4f9:0x1c9,TYPE:17,2,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-9440CN",ID:0x4f9:0x1ca,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"DCP-9045CDN",ID:0x4f9:0x1cb,TYPE:17,2,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-9840CDW",ID:0x4f9:0x1cc,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-9640CW",ID:0x4f9:0x1ec,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-9450CDN",ID:0x4f9:0x20d,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"DCP-9042CDN",ID:0x4f9:0x20c,TYPE:17,2,RE:0x85,WE:0x4 CM:,,
MODEL:"DCP-J715N",ID:0x4f9:0x258,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J615N",ID:0x4f9:0x25e,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-J515N",ID:0x4f9:0x256,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J950DN",ID:0x4f9:0x240,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J700D",ID:0x4f9:0x25f,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J800D",ID:0x4f9:0x260,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J850DN",ID:0x4f9:0x261,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J410W",ID:0x4f9:0x278,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J270W",ID:0x4f9:0x26f,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J855DN",ID:0x4f9:0x26e,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J805D",ID:0x4f9:0x26d,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-373CW",ID:0x4f9:0x234,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-253CW",ID:0x4f9:0x239,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-J125",ID:0x4f9:0x253,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-J515W",ID:0x4f9:0x255,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J220",ID:0x4f9:0x259,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J410",ID:0x4f9:0x25a,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-J415W",ID:0x4f9:0x25c,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5895CW",ID:0x4f9:0x276,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-145C",ID:0x4f9:0x206,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-165C",ID:0x4f9:0x204,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-185C",ID:0x4f9:0x205,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-385C",ID:0x4f9:0x201,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-585CW",ID:0x4f9:0x200,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-535CN",ID:0x4f9:0x1ff,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-250C",ID:0x4f9:0x1fe,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-290C",ID:0x4f9:0x1fd,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-490CW",ID:0x4f9:0x1fb,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-490CN",ID:0x4f9:0x1fa,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-790CW",ID:0x4f9:0x1f9,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-990CW",ID:0x4f9:0x1f8,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-670CD",ID:0x4f9:0x1f7,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-930CDN",ID:0x4f9:0x1f6,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5490CN",ID:0x4f9:0x1f5,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5890CN",ID:0x4f9:0x1f4,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-6690CW",ID:0x4f9:0x1f1,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6490CW",ID:0x4f9:0x1f3,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6490CN",ID:0x4f9:0x1f2,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6890CDW",ID:0x4f9:0x1f0,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-6890CN",ID:0x4f9:0x1ef,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-163C",ID:0x4f9:0x207,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-167C",ID:0x4f9:0x208,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-383C",ID:0x4f9:0x203,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-387C",ID:0x4f9:0x202,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-297C",ID:0x4f9:0x1fc,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-7450",ID:0x4f9:0x1ee,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7840N",ID:0x4f9:0x1ed,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7320",ID:0x4f9:0x1eb,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"DCP-7030",ID:0x4f9:0x1ea,TYPE:2,2,RE:0x83,WE:0x4 CM:,,
MODEL:"DCP-7040",ID:0x4f9:0x1e9,TYPE:1,2,RE:0x83,WE:0x4 CM:,,
MODEL:"DCP-7045N",ID:0x4f9:0x1e8,TYPE:1,2,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7340",ID:0x4f9:0x1e7,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7440N",ID:0x4f9:0x1e6,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:"MFC-7840W",ID:0x4f9:0x1e5,TYPE:1,1,RE:0x83,WE:0x4 CM:,,
MODEL:,ID:0x4f9:0x1,TYPE:35,65535,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-8080DN",ID:0x4f9:0x218,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"DCP-8085DN",ID:0x4f9:0x21f,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8480DN",ID:0x4f9:0x217,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
MODEL:"MFC-8890DW",ID:0x4f9:0x215,TYPE:17,1,RE:0x85,WE:0x4 CM:,,
-----------------------------
  0 "DCP-J715W"
  1 "MFC-J615W"
  2 "DCP-J315W"
  3 "MFC-J265W"
  4 "MFC-J630W"
  5 "DCP-197C"
  6 "DCP-377CW"
  7 "MFC-257CW"
  8 "DCP-195C"
  9 "DCP-365CN"
 10 "DCP-375CW"
 11 "DCP-395CN"
 12 "MFC-295CN"
 13 "MFC-495CW"
 14 "MFC-795CW"
 15 "MFC-255CW"
 16 "DCP-390CN"
 17 "DCP-595CN"
 18 "MFC-495CN"
 19 "MFC-675CD"
 20 "MFC-695CDN"
 21 "MFC-735CD"
 22 "MFC-935CDN"
 23 "DCP-8070D"
 24 "MFC-8370DN"
 25 "MFC-8380DN"
 26 "MFC-8680DN"
 27 "MFC-8880DN"
 28 "MFC-9120CN"
 29 "MFC-9320CW"
 30 "MFC-9010CN"
 31 "DCP-9010CN"
 32 "DCP-9040CN"
 33 "MFC-9440CN"
 34 "DCP-9045CDN"
 35 "MFC-9840CDW"
 36 "MFC-9640CW"
 37 "MFC-9450CDN"
 38 "DCP-9042CDN"
 39 "DCP-J715N"
 40 "MFC-J615N"
 41 "DCP-J515N"
 42 "MFC-J950DN"
 43 "MFC-J700D"
 44 "MFC-J800D"
 45 "MFC-J850DN"
 46 "MFC-J410W"
 47 "MFC-J270W"
 48 "MFC-J855DN"
 49 "MFC-J805D"
 50 "DCP-373CW"
 51 "MFC-253CW"
 52 "DCP-J125"
 53 "DCP-J515W"
 54 "MFC-J220"
 55 "MFC-J410"
 56 "MFC-J415W"
 57 "MFC-5895CW"
 58 "DCP-145C"
 59 "DCP-165C"
 60 "DCP-185C"
 61 "DCP-385C"
 62 "DCP-585CW"
 63 "DCP-535CN"
 64 "MFC-250C"
 65 "MFC-290C"
 66 "MFC-490CW"
 67 "MFC-490CN"
 68 "MFC-790CW"
 69 "MFC-990CW"
 70 "MFC-670CD"
 71 "MFC-930CDN"
 72 "MFC-5490CN"
 73 "MFC-5890CN"
 74 "DCP-6690CW"
 75 "MFC-6490CW"
 76 "MFC-6490CN"
 77 "MFC-6890CDW"
 78 "MFC-6890CN"
 79 "DCP-163C"
 80 "DCP-167C"
 81 "DCP-383C"
 82 "DCP-387C"
 83 "MFC-297C"
 84 "MFC-7450"
 85 "MFC-7840N"
 86 "MFC-7320"
 87 "DCP-7030"
 88 "DCP-7040"
 89 "DCP-7045N"
 90 "MFC-7340"
 91 "MFC-7440N"
 92 "MFC-7840W"
 93 
 94 "DCP-8080DN"
 95 "DCP-8085DN"
 96 "MFC-8480DN"
 97 "MFC-8890DW"

Devices on network
  0 MON-SCAN            "MFC-6490CW"        I:192.168.000.099
ping
test MON-SCAN
ping 192.168.000.099 -w 10

ping: unknown host 192.168.000.099
moi@moi-System:~$ 

cat /usr/local/Brother/sane/brsanenetdevice3.cfg:

moi@moi-System:~$ cat /usr/local/Brother/sane/brsanenetdevice3.cfg
DEVICE=MON-SCAN , "MFC-6490CW" , 0x4f9:0x1f3 , IP-ADDRESS=192.168.000.099 

moi@moi-System:~$ 

voila  wink

Hors ligne

#4 Le 17/08/2017, à 21:54

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Les paramètres sont ok. Est-ce que ça fonctionne si tu lances Simple Scan en admin ?

sudo simple-scan

Donne-moi aussi le retour de :

dpkg -l | grep Brother

Dernière modification par abelthorne (Le 17/08/2017, à 21:54)

Hors ligne

#5 Le 19/08/2017, à 07:44

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

sudo simple-scan
quand je lance la commande l'application s'ouvre normalement mais c'est au moment de la lancer la numérisation que l'erreur arrive.
ça me renvoie :
échec de la numérisation
impossible de se connecter au périphérique de numérisation.

dpkg -l | grep Brother:

moi@moi-System:~$ dpkg -l | grep Brother
ii  brscan-skey                                           0.2.4-1                                             amd64        Brother Linux scanner S-KEY tool
ii  brscan3                                               0.2.13-1                                            amd64        Brother Scanner Driver
ii  mfc6490cwcupswrapper                                  1.1.2-2                                             i386         Brother CUPS Inkjet Printer Definitions
ii  mfc6490cwlpr                                          1.1.2-2                                             i386         Brother lpr Inkjet Printer Definitions
ii  printer-driver-ptouch                                 1.3-8                                               amd64        printer driver Brother P-touch label printers
moi@moi-System:~$ 

le mélange x86 et x64 n'est pas volontaire, certain driver ne sont disponible que comme ça.

Dernière modification par thx199 (Le 19/08/2017, à 07:46)

Hors ligne

#6 Le 19/08/2017, à 08:29

grandtoubab

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Si je comprends bien le titre du sujet, tu veux scanner à travers le réseau
Il faut donc que  sane dans le PC connaisse l'@ip du scanner
c'est à indiquer dans le fichier  /etc/sane.d/net.conf

Exemple ci-dessous dans mon cas, a ne  pas copier/coller

cat /etc/sane.d/net.conf
# This is the net backend config file.

## net backend options
# Timeout for the initial connection to saned. This will prevent the backend
# from blocking for several minutes trying to connect to an unresponsive
# saned host (network outage, host down, ...). Value in seconds.
connect_timeout = 60

## saned hosts
# Each line names a host to attach to.
# If you list "localhost" then your backends can be accessed either
# directly or through the net backend.  Going through the net backend
# may be necessary to access devices that need special privileges.
localhost
192.168.0.22

si tu utilises un firewall, il faut qu'une règle autorise le dialogue entre les 2 machines

sudo ufw status

dans ton cas il semble que ce soit cette adresse
/usr/local/Brother/sane/brsanenetdevice3.cfg:
DEVICE=MON-SCAN , "MFC-6490CW" , 0x4f9:0x1f3 , IP-ADDRESS=192.168.000.099

Dernière modification par grandtoubab (Le 19/08/2017, à 08:38)


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#7 Le 19/08/2017, à 08:43

Brunodu24

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Bonjour,
a tout hasard, est-ce-que la fonction de numérisation depuis l'imprimante fonctionne (bouton SCAN sur l'appareil) ?
Commande possible grâce à "Brother Linux scanner S-KEY tool".


MSI 970 Gaming - AMD FX8350 octa core 4.0 Ghz - 8 Go DDR3 - Radeon RX 560 4Go DDR5 - multiboot W10 64 bits sur Sata 250 Go/Kubuntu 20.04 LTS 64 bits sur SSD 250 Go
ASUS K53SD - Inel Pentium CPU B960 (2.20Ghz) - 6 Go DDR2 - Nvidia Geforce 610M - Kubuntu 20.04 LTS 64 bits sur SSD 120 Go
Moteur de recherche : Qwant ou DuckDuckGo

Hors ligne

#8 Le 19/08/2017, à 08:47

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Relance Simple Scan en admin comme ci-dessus et va dans ses préférences : est-ce que le bon scanner est reconnu (première option) ? Est-ce que ça fonctionne mieux si tu indiques le format de page à scanner ?

Tu iras aussi sur la page de ton imprimante chez Brother pour télécharger le paquet "Scanner Setting file (deb package)" (en bas du tableau Scanner). Tu l'installeras et tu redémarreras ton PC. Après ça, tu me diras si Simple Scan se lance en utilisateur normal.

Hors ligne

#9 Le 19/08/2017, à 21:49

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

abelthorne a écrit :

Relance Simple Scan en admin comme ci-dessus et va dans ses préférences : est-ce que le bon scanner est reconnu (première option)

il a l'air bien reconnu ... du moins il est bien inscrit  Brother MFC-6490cw, et je n'est pas d'autre choix.

abelthorne a écrit :

Est-ce que ça fonctionne mieux si tu indiques le format de page à scanner ?

non ...

abelthorne a écrit :

Tu iras aussi sur la page de ton imprimante chez Brother pour télécharger le paquet "Scanner Setting file (deb package)" (en bas du tableau Scanner). Tu l'installeras et tu redémarreras ton PC. Après ça, tu me diras si Simple Scan se lance en utilisateur normal.

l’application se lance mais je demande la numérisation elle me renvoie la même erreur :
échec de la numérisation
impossible de se connecter au périphérique de numérisation.

Brunodu24 a écrit :

Bonjour,
a tout hasard, est-ce-que la fonction de numérisation depuis l'imprimante fonctionne (bouton SCAN sur l'appareil) ?
Commande possible grâce à "Brother Linux scanner S-KEY tool".

Non ça ne fonctionne pas ( mais ca ne fonctionnait pas non plus avec ma précédente imprimante, une Brother aussi. ) quand j' appuis sur la  touche elle me demande une adresse serveur mail ou serveur FTP ....  mais c'est une option qui m'importe peu, l’essentiel pour moi etant la commande depuis le PC.

grandtoubab a écrit :

Si je comprends bien le titre du sujet, tu veux scanner à travers le réseau
Il faut donc que  sane dans le PC connaisse l'@ip du scanner
c'est à indiquer dans le fichier  /etc/sane.d/net.conf

Exemple ci-dessous dans mon cas, a ne  pas copier/coller

après modification voici mon fichier /etc/sane.d/net.conf :

# This is the net backend config file.

## net backend options
# Timeout for the initial connection to saned. This will prevent the backend
# from blocking for several minutes trying to connect to an unresponsive
# saned host (network outage, host down, ...). Value in seconds.
# connect_timeout = 60

## saned hosts
# Each line names a host to attach to.
# If you list "localhost" then your backends can be accessed either
# directly or through the net backend.  Going through the net backend
# may be necessary to access devices that need special privileges.
localhost
192.168.0.99

chez simple scan pas d’évolution, il me renvoie la même erreur :
échec de la numérisation
impossible de se connecter au périphérique de numérisation.

en revanche chez Xsan il y a une évolution, il me renvoie toujours l'erreur:
erreur d'ouverture du périphérique brother3;net1;dev0: paramètre non valable.

mais maintenant il me propose le choix entre deux scanner:
1 Brother           MFC-6490CW            MON-SCAN               [brother3:net1;dev0]
2 Brother           MFC-6490CW            MON-SCAN               [net:localhost:brother3:net1;dev0]

Mais il me retourne la même erreur peux importe le choix.

encore merci à tous de chercher smile

Hors ligne

#10 Le 19/08/2017, à 21:57

grandtoubab

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

que dit

sudo  nmap -sP 192.168.0.1/24

ça scan ton reseau local pour détecter les machines , la réponse n'est pas immédiate


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#11 Le 20/08/2017, à 10:36

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

moi@moi-System:~$ sudo  nmap -sP 192.168.0.1/24
[sudo] password for moi: 

Starting Nmap 6.40 ( http://nmap.org ) at 2017-08-20 11:30 CEST
Nmap scan report for 192.168.0.1
Host is up (0.0024s latency).
MAC Address: 80:29:94:18:1B:D0 (Unknown)
Nmap scan report for 192.168.0.10
Host is up (0.12s latency).
MAC Address: CC:AF:78:13:DF:99 (Hon Hai Precision Ind. Co.)
Nmap scan report for 192.168.0.13
Host is up (0.0019s latency).
MAC Address: 80:29:94:18:1B:D5 (Unknown)
Nmap scan report for 192.168.0.15
Host is up (0.010s latency).
MAC Address: B0:A2:E7:61:C4:39 (Unknown)
Nmap scan report for 192.168.0.16
Host is up (0.010s latency).
MAC Address: 5C:0A:5B:D8:9B:FF (Samsung Electro-mechanics CO.)
Nmap scan report for 192.168.0.17
Host is up (0.010s latency).
MAC Address: 8C:70:5A:1F:18:14 (Intel Corporate)
Nmap scan report for 192.168.0.30
Host is up (-0.087s latency).
MAC Address: BC:60:A7:66:F7:99 (Unknown)
Nmap scan report for 192.168.0.99
Host is up (-0.055s latency).
MAC Address: F0:7B:CB:8C:1C:D8 (Hon Hai Precision Ind. Co.)
Nmap scan report for 192.168.0.11
Host is up.
Nmap done: 256 IP addresses (9 hosts up) scanned in 4.64 seconds
moi@moi-System:~$ 

elle est bien présente, elle est en IP fix c'est pourquoi je lui est donner le 99
l'impression se passe très bien je n'est pas de problème.
en revanche toujours pas de scanner lol ...

Hors ligne

#12 Le 20/08/2017, à 10:54

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Peut-être des biblis manquantes. Donne-moi le retour de :

ls /usr/lib64/sane | grep brother
ls /usr/lib/sane | grep brother
ls /usr/lib64 | grep libb
ls /usr/lib | grep libb

Hors ligne

#13 Le 20/08/2017, à 14:45

grandtoubab

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

ok pour le reseau mais les applis de scan ne sont elles pas bloquées par le firewall
que dit

sudo ufw status

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#14 Le 20/08/2017, à 21:30

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

abelthorne a écrit :

Peut-être des biblis manquantes

c' est effectivement un truc que je n'est pas vérifié.

moi@moi-System:~$ ls /usr/lib64/sane | grep brother
libsane-brother3.so
libsane-brother3.so.1
libsane-brother3.so.1.0.7
moi@moi-System:~$
moi@moi-System:~$ ls /usr/lib/sane | grep brother
libsane-brother3.so
libsane-brother3.so.1
libsane-brother3.so.1.0.7
moi@moi-System:~$ 
moi@moi-System:~$ ls /usr/lib64 | grep libb
libbrscandec3.so
libbrscandec3.so.1
libbrscandec3.so.1.0.0
moi@moi-System:~$
moi@moi-System:~$ ls /usr/lib | grep libb
libbfd-2.24-system.so
libbind9.so.90
libbind9.so.90.0.9
libblas
libblas.so.3
libblas.so.3gf
libbrasero-burn3.so.1
libbrasero-burn3.so.1.2.4
libbrasero-media3.so.1
libbrasero-media3.so.1.2.4
libbrasero-utils3.so.1
libbrasero-utils3.so.1.2.4
libbrscandec2.so.1
libbrscandec3.so
libbrscandec3.so.1
libbrscandec3.so.1.0.0
libburn.so.4
libburn.so.4.87.0
moi@moi-System:~$ 
grandtoubab a écrit :

ok pour le reseau mais les applis de scan ne sont elles pas bloquées par le firewall
que dit

sudo ufw status

voici wink :

moi@moi-System:~$ sudo ufw status
État : inactif

inactif ... roll

Hors ligne

#15 Le 20/08/2017, à 21:35

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Toutes les biblis sont en place. Par contre, je remarque un truc bizarre : dans /usr/lib, tu en as une qui a l'air de correspondre à brscan2 (libbrscandec2.so.1). Tu as eu un autre scanner Brother plus ancien avant ? Tu as essayé d'installer brscan2 à un moment ? Je ne vois rien au niveau des paquets mais je ne suis pas sûr que ce soit une bonne idée de la supprimer purement et simplement. Essaie de la déplacer sur ton bureau :

sudo mv /usr/lib/libbrscandec2.so.1 ~/Bureau

puis essaie à nouveau de scanner, éventuellement en redémarrant avant (ça ne devrait pas être indispensable).

EDIT : apparemment, c'est normal que ce fichier soit là, donc remets-le en place si tu as fait le mv :

sudo mv ~/Bureau/libbrscandec2.so.1 /usr/lib/

Dernière modification par abelthorne (Le 24/08/2017, à 15:05)

Hors ligne

#16 Le 27/08/2017, à 20:12

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

bonjour,
désoler pour ce long silence, j'ai été très occupé, et dans les moment de relâche ce problème de scan m’était sortie de la tete ... [shame]
encore désolé.

abelthorne a écrit :

Toutes les biblis sont en place. Par contre, je remarque un truc bizarre : dans /usr/lib, tu en as une qui a l'air de correspondre à brscan2 (libbrscandec2.so.1).Tu as eu un autre scanner Brother plus ancien avant ? Tu as essayé d'installer brscan2 à un moment ?

Oui j'ai eu une imprimante brother nécessitant brsan2 avant, mais j'ai depuis refait une install complète du système, il ne devrait donc rien en resté et je n'est pas tenter d'installer brsan2 depuis.

abelthorne a écrit :

Je ne vois rien au niveau des paquets mais je ne suis pas sûr que ce soit une bonne idée de la supprimer purement et simplement. Essaie de la déplacer sur ton bureau :

moi@moi-System:~$ sudo mv /usr/lib/libbrscandec2.so.1 ~/Bureau
[sudo] password for moi: 
moi@moi-System:~$ 

Même en redémarrent rien ne change, les messages d'erreur reste les même ...

( j ' ai remis le fichier a sa place lol ... )

Hors ligne

#17 Le 27/08/2017, à 20:16

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Non mais en fait j'ai vu dans d'autres sujets que des gens avaient le même fichier en ayant installé seulement brscan3, d'où mon edit.

Est-ce que tu peux vérifier si dans le fichier dll.conf de Sane tu as bien une ligne avec brother3 à la fin (ou ailleurs) ?

cat /etc/sane.d/dll.conf

Hors ligne

#18 Le 27/08/2017, à 20:23

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Grandtoubab, as tu d'autre idées en lien avec la communication réseaux? car je penche aussi pour cette solution, mais je ne voie pas ou ...
ma config est très standard .. modem routeur de l'opérateur (VOO) je suis en Belgique ) auquel je n'est rien modifier or mis l'SSID et la passphrase du Wifi ...
un ordi en filaire ( celui sur lequel on cherche)
et plein d'autre en wifi lol 
j' ai tenter les même manips sur un laptop avec Ubuntu 16.04 lts puis 14.04 lts avec la même issu qu 'ici.

Hors ligne

#19 Le 27/08/2017, à 20:30

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

abelthorne a écrit :

Est-ce que tu peux vérifier si dans le fichier dll.conf de Sane tu as bien une ligne avec brother3 à la fin (ou ailleurs) ?

je l' avais déjas vérifier avant à la suite de la lecture d'un doc ubuntu => ici

moi@moi-System:~$ cat /etc/sane.d/dll.conf
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#

# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp



brother3
moi@moi-System:~$

Hors ligne

#20 Le 27/08/2017, à 20:32

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

En USB, le scanner fonctionne ?

Hors ligne

#21 Le 27/08/2017, à 20:38

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

abelthorne a écrit :

En USB, le scanner fonctionne ?

Je n'ai jamais  tester lol , elle est énorme et pas du tout pratique à coté de la tour.
je vais faire le test tout de suite ...

Hors ligne

#22 Le 27/08/2017, à 21:10

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

voila le test fait, je m'y attendais un peu mais elle est immédiatement reconnu par les deux softs et scan sans problème. ( encore plus frustrant au vue de la qualité de numérisation roll )

sur Xsan au démarrage il m'a proposé ça :

1 Brother           MFC-6490CW                 MON-SCAN               [brother3:net1;dev0]
2 Brother           MFC-6490CW               USBscanner              [brother3:bus8;dev1]
3 Brother           MFC-6490CW                MON-SCAN              [net:localhost:brother3:net1;dev0]
4 Brother           MFC-6490CW                USBscanner              [net:localhost:brother3:bus8;dev1]

Pour le :bus8 je peux comprendre le changement lol , mais pourquoi ce ;dev1 et non pas ;dev0 ?

Hors ligne

#23 Le 27/08/2017, à 21:26

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

Je pense (pure hypothèse) qu'il considère qu'il y a deux scanners "virtuels" en fonction du type de connexion : un en wi-fi et un en USB. Est-ce que dans les préférences de Simple Scan tu en as deux qui apparaissent ? Si oui, est-ce que les deux fonctionnent pour scanner (en restant branché comme ça) ?

Hors ligne

#24 Le 27/08/2017, à 21:53

thx199

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

j'avais 4 choix aussi dans simplescan, (moins détaillé) et le 2 et le 4 fonctionnaient ..
ok pour les scan virtuel, mais justement on ne devrait pas retrouver :dev(0 ou 1 ) a chaque foi ? ( et non pas des différent )

Hors ligne

#25 Le 27/08/2017, à 22:08

abelthorne

Re : Scanner Brother MFC-6490CW non reconnu (Wifi) [RESOLU]

S'il les considère comme deux périphériques (devices) différents, ça me semble logique qu'il les nomme différemment.

Bon, ça ne résout pas le problème du wi-fi mais ça semble confirmer que tout est bien installé au niveau des pilotes. Il y a une possibilité que le problème soit propre à Ubuntu 14.04.

Cela dit, je me rends compte en relisant le sujet qu'on n'a pas mis en place de règle udev (à moins que j'aie mal relu). Je doute que le problème vienne de là étant donné que le scanner ne fonctionne pas non plus en admin en wi-fi et en qu'en USB ça a l'air de fonctionner (tu peux scanner sans problème en lançant Simple Scan en utilisateur normal ?).

Hors ligne