#1 Le 03/05/2017, à 22:35
- velvoune
[Résolu] "error: no such partition, entering rescue mode"
Bonsoir,
Sur mon PC j'avais Ubuntu et Windows 7 en paralléle. J'ai voulu mettre à niveau windows 7 vers windows 10. Naîvement sans doute, je croyais que cela irait tout seul et ne toucherai pas à la partition linux. Visiblement erreur de débutante que je suis.
Je me retrouve donc avec mon pc qui ne veut pas démarrer et m'affiche le message:
" Error : No such Partition , entering rescue mode" puis affichant l'écran de commande "Grub rescue>".
Sauf que je n'y connais rien... :-(
J'ai fait la commande "ls". Voilà ce qui s'affiche:
(hd0) (hd0,msdos5) ( hd0,msdos3) (hd0,msdos2) (hd0,msdo1) (hd1) (hd1,msdos1)
Suite au message de Malbo lors de mon premier message sur un ancien fil de discussion, j'ai fait un bisnext dont voici le lien du rapport:
Rapport Bisnext
Quelqu'un pourrait-il m'aider à récuperer mes partitions svp?
Est-ce que si je réinstalle ubuntu dans la même partition que j'avais utilisée, je retrouverai mon linux et aussi windows 10?
Un grand merci pour votre aide!
Dernière modification par Ayral (Le 10/05/2017, à 23:03)
Hors ligne
#2 Le 04/05/2017, à 00:38
- Bougron
Re : [Résolu] "error: no such partition, entering rescue mode"
Bonsoir.
Tu es dans ce contexte https://forum.ubuntu-fr.org/viewtopic.php?id=1895691
Le plus simple est de réinstaller ubuntu. Il y a de l'espace inutilisé!
Dernière modification par Bougron (Le 04/05/2017, à 00:44)
Hors ligne
#3 Le 04/05/2017, à 05:45
- malbo
Re : [Résolu] "error: no such partition, entering rescue mode"
Je ne copie pas tout le rapport Bisnext mais seulement la partie qui montre le problème :
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 292,453,055 292,246,208 7 NTFS / exFAT / HPFS
/dev/sda3 292,454,400 293,394,431 940,032 27 Hidden NTFS (Recovery Environment)
/dev/sda4 293,396,478 488,396,799 195,000,322 5 Extended
/dev/sda5 455,010,304 488,396,799 33,386,496 82 Linux swap / SolarisJe confirme l'analyse de Bougron : on a bien la signature du crime que j'ai notée dans ce post (dans la partie EDIT) : https://forum.ubuntu-fr.org/viewtopic.p … #p20479871
c'est à dire partition sda5 (swap) toute seule en fin de partition étendue, partition racine disparue.
Moi je ne sais pas t'aider à récupérer ta (ou tes) partitions disparues mais certains sur le forum pourront peut-être t'aider.
Dernière modification par malbo (Le 04/05/2017, à 05:49)
Hors ligne
#4 Le 04/05/2017, à 09:40
- velvoune
Re : [Résolu] "error: no such partition, entering rescue mode"
Bonjour, merci pour vos réponses.
Si je réinstalle Linux sur la sda5, pensez- vous que cela fonctionnera? Faudra-t-il que je réinstalle Windows ?
Je n'avais pas de document ou dossier important non sauvegardé donc cela n'a pas d'importance pour moi de tout réinstaller. Du moment que le pc redémarre normalement...
Mercii
Dernière modification par velvoune (Le 04/05/2017, à 09:41)
Hors ligne
#5 Le 04/05/2017, à 10:40
- malbo
Re : [Résolu] "error: no such partition, entering rescue mode"
Pour éviter les ennuis (écrasement accidentel de ton Windows), je te recommande d'opérer depuis une session Live de Ubuntu avec l'éditeur de partition GPARTED* :
1) tu supprimes la partition sda5 (c'est nécessaire pour que les partitions logiques soient numérotées ensuite dans l'ordre du disque)
2) tu crées au début de la partition étendue une partition logique EXT4 destinée à devenir ta partition racine de Ubuntu (tu laisses juste la place pour la partition SWAP que tu vas créer en fin de partition étendue)
3) tu crées à la suite de la précédente une partition logique SWAP (après ça, la partition étendue est totalement occupée par les deux partitions logiques)
4) tu appliques les modifications dans Gparted afin de vérifier que la partition racine porte bien le numéro sda5 et que la partition swap porte bien le numéro sda6. Si ce n'est pas bon, tu recommences tout jusqu'à ce que ce soit bon.
5) Tu quittes Gparted et tu fais l'installation de Ubuntu (depuis la session live, tu fais un double-clic sur l'icône de l'installateur de Ubuntu) et tu fais attention de sélectionner "Autre chose" à l'étape "Type d'installation"
* doc officielle de Gparted ICI
Dernière modification par malbo (Le 04/05/2017, à 10:52)
Hors ligne
#6 Le 04/05/2017, à 12:17
- velvoune
Re : [Résolu] "error: no such partition, entering rescue mode"
Mercii. Je devrais pouvoir y arriver..... après tout je l'avais bien fait la première fois même si ce n'etait pas aussi propre..
J'essaye d'ici semaine prochaine quand les enfants seront à la crèche et vous tiens au courant de comment je m'en sors.
Hors ligne
#7 Le 09/05/2017, à 11:20
- velvoune
Re : [Résolu] "error: no such partition, entering rescue mode"
Bonjour,
Alors j'ai fais la manip de supprimer la partition sda5 puis de recréer la partition comme expliqué par "Malbo" puis de réinstaller Ubuntu. Mais rien n'y fait cela ne marche toujours pas. Le PC ne veut pas démarrer sur les systémes d'exploitation et j'arrive sur une page de terminal en Grub rescue mode....
Le message d'erreur est :" error:unknown filesystem, entering rescue mode, grub rescue mode>"
Pouvez-vous m'aider denouveau svp?
Merci
Voici le rapport bisnext. Pas de lien disponible.
May 9 2017, bisnext report id 9b5d7
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 3.13.0-32-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: N/A dm: lightdm Distro: Ubuntu 14.04.1 LTS
Machine: Device: desktop Mobo: ASUSTeK model: M5A97 R2.0 v: Rev 1.xx
BIOS: American Megatrends v: 0906 date: 09/17/2012
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core AMD Athlon II X4 640 (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 24080
clock speeds: min/max: 800/3000 MHz 1: 2300 MHz 2: 1800 MHz
3: 800 MHz 4: 1800 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: DIMM0 size: No Module Installed type: N/A
Device-2: DIMM1 size: 8 GB speed: 667 MHz type: DDR3
manufacturer: Corsair part: CMX16GX3M2A1333C9
Device-3: DIMM2 size: No Module Installed type: N/A
Device-4: DIMM3 size: 8 GB speed: 667 MHz type: DDR3
manufacturer: Corsair part: CMX16GX3M2A1333C9
Graphics: Card: NVIDIA G73 [GeForce 7600 GS]
bus-ID: 01:00.0 chip-ID: 10de:0392
Display Server: X.Org 1.15.1 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
tty size: 1280x1024@60.0hz, 1280x1024@60.0hz
GLX Renderer: Gallium 0.4 on NV4B
GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:4383
Sound: Advanced Linux Sound Architecture v: k3.13.0-32-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Card-2: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too v: 0.9.28 port: c000
bus-ID: 05:05.0 chip-ID: 10ec:8139
IF: eth1 state: down mac: <filter>
Card-3: Belkin F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]
driver: rt73usb v: 2.3.0 usb-ID: 001-002 chip-ID: 050d:705a
IF: wlan0 state: N/A mac: N/A
Drives: HDD Total Size: 250.1GB (4.0% used)
ID-1: /dev/sda model: HDT722525DLA380 size: 250.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GH24NS95
rev: RN01 dev-links: cdrom
Features: speed: 125x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 7.8G used: 211M (3%) fs: overlayfs dev: /dev/cow
label: N/A uuid: N/A
ID-2: swap-1 size: 10.48GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
label: N/A uuid: e0c1a755-4603-47ce-aedc-bfd4093e5d0e
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 0.10G
label: System Reserved uuid: 98C48AA7C48A86EA
ID-2: /dev/sda2 size: 149.63G label: N/A uuid: 52164CFD164CE417
ID-3: /dev/sda3 size: 0.48G label: N/A uuid: 98AA4FFDAA4FD702
ID-4: /dev/sda5 size: 89.36G
label: N/A uuid: 40c6355c-bf77-4852-807d-e70752957e22
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Ubuntu 14.04.1 LTS _Trusty Tahr_ - Release amd64 (20140722.2)]/ trusty main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 1.3% command: compiz pid: 5163 mem: 195.93MB (1.2%)
2: cpu: 0.7% command: X pid: 4713 mem: 29.06MB (0.1%)
3: cpu: 0.6% command: bash pid: 6471 mem: 2.87MB (0.0%)
4: cpu: 0.4% command: gnome-terminal pid: 5590 mem: 18.00MB (0.1%)
5: cpu: 0.3% command: ibus-daemon pid: 4812 mem: 4.00MB (0.0%)
6: cpu: 0.2% daemon: ~kworker/u8:0~ pid: 5514 mem: 0.00MB (0.0%)
7: cpu: 0.2% daemon: ~kworker/u8:6~ pid: 148 mem: 0.00MB (0.0%)
8: cpu: 0.2% daemon: ~kworker/u8:3~ pid: 145 mem: 0.00MB (0.0%)
9: cpu: 0.1% command: nautilus pid: 5299 mem: 38.84MB (0.2%)
10: cpu: 0.1% command: nm-applet pid: 5290 mem: 28.52MB (0.1%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 195.93MB (1.2%) command: compiz pid: 5163 cpu: 1.3%
2: mem: 43.25MB (0.2%) command: evolution-calendar-factory pid: 5318 cpu: 0.0%
3: mem: 38.84MB (0.2%) command: nautilus pid: 5299 cpu: 0.1%
4: mem: 29.06MB (0.1%) command: X pid: 4713 cpu: 0.7%
5: mem: 28.52MB (0.1%) command: nm-applet pid: 5290 cpu: 0.1%
6: mem: 21.30MB (0.1%) command: unity-scope-loader pid: 5532 cpu: 0.0%
7: mem: 19.71MB (0.1%) command: hud-service pid: 4961 cpu: 0.0%
8: mem: 18.00MB (0.1%) command: gnome-terminal pid: 5590 cpu: 0.4%
9: mem: 17.43MB (0.1%) command: unity-settings-daemon pid: 4957 cpu: 0.0%
10: mem: 17.37MB (0.1%) command: unity-panel-service pid: 4969 cpu: 0.1%
Info: Processes: 195 Uptime: 23 min Memory: 744.6/15969.3MB
Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.2
Client: Shell (bash 4.3.111 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda5:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda5
and looks at sector 461506248 of the same hard drive
for core.img. core.img is at this location.
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 292,453,055 292,246,208 7 NTFS / exFAT / HPFS
/dev/sda3 292,454,400 293,394,431 940,032 27 Hidden NTFS (Recovery Environment)
/dev/sda4 293,394,432 488,396,799 195,002,368 5 Extended
/dev/sda5 293,396,480 467,920,895 174,524,416 83 Linux
/dev/sda6 467,922,944 488,396,799 20,473,856 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 98C48AA7C48A86EA ntfs System Reserved
/dev/sda2 52164CFD164CE417 ntfs
/dev/sda3 98AA4FFDAA4FD702 ntfs
/dev/sda5 40c6355c-bf77-4852-807d-e70752957e22 ext4
/dev/sda6 e0c1a755-4603-47ce-aedc-bfd4093e5d0e swap
/dev/sr0 iso9660 Mint-Ubuntu 2014.1
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 mai 9 2017 ata-HDT722525DLA380_VDK41BT4E722MK -> ../../sda
lrwxrwxrwx 1 root root 10 mai 9 2017 ata-HDT722525DLA380_VDK41BT4E722MK-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 9 2017 ata-HDT722525DLA380_VDK41BT4E722MK-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 9 2017 ata-HDT722525DLA380_VDK41BT4E722MK-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 mai 9 2017 ata-HDT722525DLA380_VDK41BT4E722MK-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 mai 9 2017 ata-HDT722525DLA380_VDK41BT4E722MK-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai 9 2017 ata-HDT722525DLA380_VDK41BT4E722MK-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 mai 9 2017 ata-HL-DT-ST_DVDRAM_GH24NS95_KFCCA591555 -> ../../sr0
lrwxrwxrwx 1 root root 9 mai 9 2017 wwn-0x5000cca20bdf656e -> ../../sda
lrwxrwxrwx 1 root root 10 mai 9 2017 wwn-0x5000cca20bdf656e-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 9 2017 wwn-0x5000cca20bdf656e-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 9 2017 wwn-0x5000cca20bdf656e-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 mai 9 2017 wwn-0x5000cca20bdf656e-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 mai 9 2017 wwn-0x5000cca20bdf656e-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai 9 2017 wwn-0x5000cca20bdf656e-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 mai 9 2017 wwn-0x5001480000000000 -> ../../sr0
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
/cow / overlayfs 7.8G 211M 7.6G 3% 1%
/dev/loop0 /rofs squashfs 940M 940M 0 100% 100%
/dev/sr0 /cdrom iso9660 4.1G 4.1G 0 100% -
__________________________=== Boot Files Content ===___________________________
___________________________ sda5/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-40c6355c-bf77-4852-807d-e70752957e22' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 40c6355c-bf77-4852-807d-e70752957e22
else
search --no-floppy --fs-uuid --set=root 40c6355c-bf77-4852-807d-e70752957e22
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=40c6355c-bf77-4852-807d-e70752957e22 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 40c6355c-bf77-4852-807d-e70752957e22
else
search --no-floppy --fs-uuid --set=root 40c6355c-bf77-4852-807d-e70752957e22
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 40c6355c-bf77-4852-807d-e70752957e22
else
search --no-floppy --fs-uuid --set=root 40c6355c-bf77-4852-807d-e70752957e22
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-98C48AA7C48A86EA' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 98C48AA7C48A86EA
else
search --no-floppy --fs-uuid --set=root 98C48AA7C48A86EA
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda5/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=40c6355c-bf77-4852-807d-e70752957e22 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=e0c1a755-4603-47ce-aedc-bfd4093e5d0e none swap sw 0 0
____________________________ sda5/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
file=/cdrom/ub64/preseed/ubuntu.seed boot=casper initrd=/ub64/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss maybe-ubiquity
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 11.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 10.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/4p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 4: Dev 2, If 0, Class=Vendor Specific Class, Driver=rt73usb, 480M
___________________________________ Modules Loaded ____________________________
Module Size Used by
8139cp 27953 0
8139too 33544 0
ahci 25819 3
arc4 12608 2
asus_wmi 24191 1 eeepc_wmi
bluetooth 391196 10 bnep,rfcomm
bnep 19624 2
btcx_risc 13640 3 cx8800,cx8802,cx88xx
btrfs 835954 0
ccm 17773 2
cfg80211 484040 2 mac80211,rt2x00lib
crc_itu_t 12707 1 rt73usb
ctr 13049 2
cx22702 13489 1
cx8800 37892 0
cx8802 18972 1 cx88_dvb
cx88_dvb 34393 0
cx88_vp3054_i2c 12911 1 cx88_dvb
cx88xx 88508 3 cx88_dvb,cx8800,cx8802
dm_crypt 23177 0
dm_log 18411 2 dm_region_hash,dm_mirror
dm_mirror 22135 0
dm_multipath 22873 0
dm_region_hash 20862 1 dm_mirror
drm 303102 5 ttm,drm_kms_helper,nouveau
drm_kms_helper 53081 1 nouveau
dvb_core 121659 2 cx88_dvb,videobuf_dvb
dvb_pll 18840 1
edac_core 62291 0
edac_mce_amd 22617 0
eeepc_wmi 13151 0
hfs 54677 0
hfsplus 107516 0
hid 106148 4 usbhid,hid_logitech_dj
hid_logitech_dj 18581 0
i2c_algo_bit 13413 3 cx88_vp3054_i2c,cx88xx,nouveau
i2c_piix4 22155 0
isofs 39835 1
jfs 181348 0
joydev 17381 0
k10temp 13126 0
kvm 451511 1 kvm_amd
kvm_amd 59987 0
libahci 32560 1 ahci
libcrc32c 12644 2 xfs,btrfs
lp 17759 0
mac80211 630653 2 rt2x00lib,rt2x00usb
mac_hid 13205 0
mii 13934 3 r8169,8139cp,8139too
minix 36140 0
msdos 17332 0
mxm_wmi 13021 1 nouveau
nls_utf8 12557 1
nouveau 1097199 3
ntfs 97369 0
overlayfs 27916 1
parport 42348 3 lp,ppdev,parport_pc
parport_pc 32701 0
ppdev 17671 0
psmouse 106678 0
qnx4 13317 0
r8169 67581 0
raid6_pq 97812 1 btrfs
rc_core 28124 3 cx88xx,rc_winfast
rc_winfast 12502 0
rfcomm 69160 0
rt2x00lib 55307 2 rt73usb,rt2x00usb
rt2x00usb 20742 1 rt73usb
rt73usb 31580 0
scsi_dh 14882 1 dm_multipath
serio_raw 13462 0
snd 69238 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
snd_hda_codec 192906 2 snd_hda_codec_realtek,snd_hda_intel
snd_hda_codec_realtek 61438 1
snd_hda_intel 52355 3
snd_hwdep 13602 1 snd_hda_codec
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
snd_rawmidi 30144 1 snd_seq_midi
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
soundcore 12680 1 snd
sp5100_tco 13979 0
sparse_keymap 13948 1 asus_wmi
squashfs 48362 1
ttm 85115 1 nouveau
tveeprom 21216 1 cx88xx
ufs 74890 0
usbhid 52570 0
v4l2_common 15681 2 cx8800,cx88xx
video 19476 2 nouveau,asus_wmi
videobuf_core 26023 5 videobuf_dma_sg,videobuf_dvb,cx8800,cx8802,cx88xx
videobuf_dma_sg 19262 4 cx88_dvb,cx8800,cx8802,cx88xx
videobuf_dvb 14092 1 cx88_dvb
videodev 134688 3 cx8800,cx88xx,v4l2_common
wmi 19177 3 mxm_wmi,nouveau,asus_wmi
xfs 912173 0
xor 21411 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0 ==
modalias : pci:v000010DEd00000392sv00001462sd00000413bc03sc00i00
vendor : NVIDIA Corporation
model : G73 [GeForce 7600 GS]
driver : nvidia-173 - distro non-free
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-304 - distro non-free recommended
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
options: lv3:ralt_switch
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 694 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 3.13.0.32.38
linux-headers-3.13.0-32 3.13.0-32.57
linux-headers-3.13.0-32-generic 3.13.0-32.57
linux-headers-generic 3.13.0.32.38
linux-image-3.13.0-32-generic 3.13.0-32.57
linux-image-extra-3.13.0-32-generic 3.13.0-32.57
linux-image-generic 3.13.0.32.38
linux-signed-generic 3.13.0.32.38
linux-signed-image-3.13.0-32-generic 3.13.0-32.57
linux-signed-image-generic 3.13.0.32.38
File list in /boot directory:
abi-3.13.0-32-generic
config-3.13.0-32-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-3.13.0-32-generic
_________________________________ System Logs ________________________________
Selection of relevent log entries:
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
[ 0.426520] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.426523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.439025] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.444575] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.471333] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.471608] SCSI subsystem initialized
[ 4.090844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.595154] scsi0 : ahci
[ 4.595352] scsi1 : ahci
[ 4.595430] scsi2 : ahci
[ 4.595482] scsi3 : ahci
[ 4.595552] scsi4 : ahci
[ 4.595631] scsi5 : ahci
[ 5.085963] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.085990] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.088509] scsi 1:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
[ 5.088728] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 5.088766] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.090653] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5
[ 5.093308] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.093473] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 5.093588] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 5.135559] sd 1:0:0:0: [sda] Attached SCSI disk
[ 62.812950] usb 1-4: reset high-speed USB device number 2 using ehci-pci
[ 71.408036] init: alsa-restore main process (1603) terminated with status 99
[ 71.836876] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[ 71.836944] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[ 79.691763] init: plymouth-upstart-bridge main process (2169) terminated with status 1
[ 850.247759] systemd-hostnamed[5628]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 881.256387] wlan0: RX AssocResp from 40:c7:29:14:ed:82 (capab=0x411 status=0 aid=1)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech Unifying Device. Wireless PID:400a id=9 [slave pointer (2)]
⎜ ↳ Logitech Unifying Device. Wireless PID:4003 id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ cx88 IR (WinFast DTV1000-T) id=8 [slave keyboard (3)]
↳ Eee PC WMI hotkeys id=11 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 4096 x 4096
DVI-I-1 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
VGA-1 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1152x864 75.0
1024x768 75.1 75.0 60.0
832x624 74.6
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
TV-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 172.348] (==) No Layout section. Using the first Screen section.
[ 172.348] (==) No screen section available. Using defaults.
[ 172.348] (**) |-->Screen "Default Screen Section" (0)
[ 172.348] (**) | |-->Monitor "<default monitor>"
[ 172.348] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 172.350] (--) PCI:*(0:1:0:0) 10de:0392:1462:0413 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 172.350] (--) PCI: (0:5:6:0) 14f1:8800:107d:665f rev 5, Mem @ 0xfa000000/16777216
[ 172.351] (II) LoadModule: "glx"
[ 172.351] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 172.352] (II) LoadModule: "nvidia"
[ 172.353] (WW) Warning, couldn't open module nvidia
[ 172.353] (II) UnloadModule: "nvidia"
[ 172.353] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 172.353] (II) LoadModule: "nouveau"
[ 172.353] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 172.353] (II) LoadModule: "modesetting"
[ 172.353] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 172.353] (II) LoadModule: "fbdev"
[ 172.353] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 172.353] (II) LoadModule: "vesa"
[ 172.354] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 172.354] (II) LoadModule: "nvidia"
[ 172.354] (WW) Warning, couldn't open module nvidia
[ 172.354] (II) UnloadModule: "nvidia"
[ 172.354] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 172.354] (II) LoadModule: "nouveau"
[ 172.354] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 172.354] (II) UnloadModule: "nouveau"
[ 172.354] (II) LoadModule: "modesetting"
[ 172.354] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 172.354] (II) UnloadModule: "modesetting"
[ 172.354] (II) LoadModule: "fbdev"
[ 172.354] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 172.354] (II) UnloadModule: "fbdev"
[ 172.354] (II) LoadModule: "vesa"
[ 172.354] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 172.354] (II) UnloadModule: "vesa"
[ 172.355] (WW) Falling back to old probe method for modesetting
[ 172.355] (WW) Falling back to old probe method for fbdev
[ 172.355] (II) Loading sub module "fbdevhw"
[ 172.355] (II) LoadModule: "fbdevhw"
[ 172.355] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 172.355] (WW) Falling back to old probe method for vesa
[ 172.355] (II) Loading sub module "dri2"
[ 172.355] (II) LoadModule: "dri2"
[ 172.355] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 172.387] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 172.418] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 172.472] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 172.505] (II) NOUVEAU(0): Monitor name: NEC LCD1701
[ 172.537] (II) NOUVEAU(0): Monitor name: L1720B
[ 172.537] (II) NOUVEAU(0): Monitor name:
[ 172.592] (II) Loading sub module "fb"
[ 172.592] (II) LoadModule: "fb"
[ 172.592] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 172.592] (II) Loading sub module "exa"
[ 172.592] (II) LoadModule: "exa"
[ 172.592] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 172.593] (II) Loading sub module "shadowfb"
[ 172.593] (II) LoadModule: "shadowfb"
[ 172.593] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 172.593] (II) UnloadModule: "modesetting"
[ 172.593] (II) UnloadModule: "fbdev"
[ 172.593] (II) UnloadModule: "vesa"
[ 172.595] (II) EXA(0): Driver allocated offscreen pixmaps
[ 172.595] (II) UploadToScreen
[ 172.595] (II) DownloadFromScreen
[ 172.620] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 172.624] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 172.637] (II) LoadModule: "evdev"
[ 172.637] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 172.643] (WW) evdev: Logitech Unifying Device. Wireless PID:4003: ignoring absolute axes.
[ 719.827] (EE) Error loading keymap /var/lib/xkb/server-4E6C7B9E84E9DED6A41B6B1FE7C8430739BE1CB8.xkm
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
Skipping "/dev/dri/card0", driven by "nouveau"
Does it require offloading? no
grep dmesg status 256
dmesg status 256 == 0? No
grep dmesg status 256
dmesg status 256 == 0? No
Is nvidia loaded? no
Was nvidia unloaded? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is intel loaded? no
Is radeon loaded? no
Is nouveau loaded? yes
Vendor/Device Id: 10de:392
BusID "PCI:1@0:0:0"
Is boot vga? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Is nvidia enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is nvidia available? no
Is fglrx available? no
Is mesa available? yes
Is pxpress available? no
Is prime available? no
System configuration has changed
Single card detected
Kernel Module is not loaded
Nothing to do
No change - nothing to do
==============================================================================
# System Information for Ubuntu 14.04.1 LTS in /dev/sda5
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 3.13.0.32.38
linux-headers-3.13.0-32 3.13.0-32.57
linux-headers-3.13.0-32-generic 3.13.0-32.57
linux-headers-generic 3.13.0.32.38
linux-image-3.13.0-32-generic 3.13.0-32.57
linux-image-extra-3.13.0-32-generic 3.13.0-32.57
linux-image-generic 3.13.0.32.38
File list in /boot directory:
abi-3.13.0-32-generic
config-3.13.0-32-generic
grub
initrd.img-3.13.0-32-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-3.13.0-32-generic
vmlinuz-3.13.0-32-generic
__________________________________ Locales ___________________________________
/etc/default/locale:
LANG="fr_FR.UTF-8"
LC_NUMERIC="en_GB.UTF-8"
LC_TIME="en_GB.UTF-8"
LC_MONETARY="en_GB.UTF-8"
LC_PAPER="en_GB.UTF-8"
LC_NAME="en_GB.UTF-8"
LC_ADDRESS="en_GB.UTF-8"
LC_TELEPHONE="en_GB.UTF-8"
LC_MEASUREMENT="en_GB.UTF-8"
LC_IDENTIFICATION="en_GB.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT=""
XKBOPTIONS=""
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar T7K250
Device Model: HDT722525DLA380
LU WWN Device Id: 5 000cca 20bdf656e
Firmware Version: V44OA96A
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
Local Time is: Tue May 9 09:07:35 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 095 095 016 - 393223
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--- 177 177 024 - 207 (Average 187)
4 Start_Stop_Count -O--C- 100 100 000 - 2520
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 3
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 098 098 000 - 19380
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2517
192 Power-Off_Retract_Count -O--CK 098 098 050 - 3260
193 Load_Cycle_Count -O--C- 098 098 050 - 3260
194 Temperature_Celsius -O---- 171 171 000 - 32 (Min/Max 12/53)
196 Reallocated_Event_Count -O--CK 100 100 000 - 3
197 Current_Pending_Sector -O---K 100 100 000 - 1
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
=============================== StdErr Messages ===============================
No volume groups found
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: Unable to write to /var/cache/apt/
E: The package lists or status file could not be parsed or opened.Dernière modification par velvoune (Le 09/05/2017, à 11:26)
Hors ligne
#8 Le 09/05/2017, à 11:43
- malbo
Re : [Résolu] "error: no such partition, entering rescue mode"
On voit où tu as fauté dans cet extrait :
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda5
and looks at sector 461506248 of the same hard drive
for core.img. core.img is at this location.
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.imgGrub a été installé dans le secteur de démarrage de la partition sda5 parce que tu as sélectionné "/dev/sda5" dans le champ Périphérique où sera installé le programme de démarrage" à l'étape Type d'installation (c'est en bas de la fenêtre de l'installateur) alors qu'il fallait laisser ce qui était présélectionné par défaut : /dev/sda (pour que le chargeur d'amorçage de Grub soit installé dans le MBR du disque dur pour remplacer celui qui s'y trouve actuellement mais qui ne convient pas puisqu'il pointe sur une partition qui n'existe plus)
Pour réparer ça, tu peux utiliser la "réparation recommandée" de Boot-repair depuis ta session live.
Dernière modification par malbo (Le 09/05/2017, à 11:45)
Hors ligne
#9 Le 09/05/2017, à 23:33
- velvoune
Re : [Résolu] "error: no such partition, entering rescue mode"
Bonsoir,
Merci pour ton aide Malbo. Est-ce que sinon je ne pourrais pas refaire tout simplement la même manipulation que précédemment sans me tromper ce coup ci?
Merci
Dernière modification par velvoune (Le 09/05/2017, à 23:33)
Hors ligne
#10 Le 09/05/2017, à 23:40
- Bougron
Re : [Résolu] "error: no such partition, entering rescue mode"
Bonsoir
Malbo pense que c'est plus rapide de réparer avec boot-repair. Cependant si tu préfères recommencer l'installation avec les bons paramètres, cela reviendra au même .
Dernière modification par Bougron (Le 09/05/2017, à 23:40)
Hors ligne
#11 Le 10/05/2017, à 21:14
- velvoune
Re : [Résolu] "error: no such partition, entering rescue mode"
Bonsoir, J'ai donc finalement utilisé boot-repair et tous refonctionnent super bien. La
Migration vers win10 a repris là où elle s'etait arrêtée.
Impeccable.
Merci pour votre aide et votre rapidité de réponse !
Hors ligne
#12 Le 10/05/2017, à 23:06
- Ayral
Re : [Résolu] "error: no such partition, entering rescue mode"
Modération : ta discussion a été passée en résolu. Tu pourras à l'avenir le faire toi-même en modifiant (en cliquant sur "Modifier" en bas de ton premier message) en rajoutant l'expression [Résolu] au début du sujet de ce premier message. Bonsoir.
Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 22.04 LTS sur un Thinkpad W540
Hors ligne