Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 29/11/2016, à 16:16

siddhartha

16.10 Ecran noir > Configuration Bumblebee

Bonjour

Je viens de faire les mises à jour de la 14.04 à la 16.04 puis 16.10.

L'ordi asus zenbook ux302lg c4007p avec double cartes graphiques : intel et nvidia

J'avais déjà eu un probleme à l'achat de l'ordi : https://forum.ubuntu-fr.org/viewtopic.php?id=1631351 que j'avais résolu avec un noyau particuliers

Depuis je n'avais pas osé faire les mises à jour, mais je me suis décidé ce week end....

Le 1er demarrage s'est fait correctement sauf que j'ai eu une info driver avec une liste de 3 drivers que je retrouve à nouveau :

driver

J'ai opté pour le pilote recommandé et au redemarrage, j'ai eu un ecran noir que j'ai résolu sur ce forum : https://forum.ubuntu-fr.org/viewtopic.php?id=1351611

Dclick a écrit :
classdroogies a écrit :

Utilises la console de récupération directement.

Activation de l'écriture  :

mount -o remount,rw /

Désinstallation des pilotes nvidia :

apt-get remove nvidia-*

Suppression du fichier de conf :

rm /etc/X11/xorg.conf

Tu redémarres --> ton système va utiliser le pilote libre.

Tu installes le pilote proprio qui va bien.

Ca a résolu mon soucis... mais j'avais toujours un double écran sur mon display port... Aujourd'hui j'ai bougé et au démarrage de l'ordi : ecran noir et dans l'ordre : curseur, puis pointeur souris au centre, puis pointeur bloqué sur un ligne tout en haut de l'ecran
Je suis passé en console, je me suis connecté et quand je lance le server X je retombe sur l'ecran noir avec le pointeur de souris en haut de l'ecran

Une methode que j'ai trouvé, c'est de choisir le recovery mode et là ca passe sans pb !

Voici les infos techniques :

- cat /etc/lsb-release

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.10
DISTRIB_CODENAME=yakkety
DISTRIB_DESCRIPTION="Ubuntu 16.10"

- lsusb

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 03eb:8a03 Atmel Corp. 
Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. 
Bus 001 Device 002: ID 8087:07dc Intel Corp. 
Bus 001 Device 008: ID 2ae5:f00e  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

- lspci

00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 8 Series Thermal (rev 04)
02:00.0 Unassigned class [ff00]: Alcor Micro AU6601 PCI-E Flash card reader controller
03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
04:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 730M] (rev ff)

- uname -r -m

4.8.0-27-generic x86_64



Si quelqu'un a une piste je suis preneur !

Dernière modification par siddhartha (Le 16/01/2017, à 22:55)


consultant internet / webmaster
www.stephane-desrousseaux.fr

Hors ligne

#2 Le 11/12/2016, à 21:23

siddhartha

Re : 16.10 Ecran noir > Configuration Bumblebee

Je viens de tenter une ré-installation des drivers Nvidia avec Prime comme indiqué dans la doc Prime mais sans succès, toujours le même probleme.
Ca m'a juste changé les polices des composants graphiques, de dolphin....


consultant internet / webmaster
www.stephane-desrousseaux.fr

Hors ligne

#3 Le 11/12/2016, à 21:29

siddhartha

Re : 16.10 Ecran noir > Configuration Bumblebee

J'ai retrouvé ma config enbasculant sur Intel (Power saving mode) dans NVIDIA X Server Settings...


consultant internet / webmaster
www.stephane-desrousseaux.fr

Hors ligne

#4 Le 16/01/2017, à 11:30

siddhartha

Re : 16.10 Ecran noir > Configuration Bumblebee

Je continue mon sujet car je viens de faire un upgrade et ca n'améliore pas les choses.
Depuis mes soucis, seul démarrer en recovery_mode pour avoir une session graphique

Comme j'ai fait des mises à jour et que j'ai changé de noyaux, j'ai desinstallé et re-installé nvidia, comme conseillé dans la page https://doc.ubuntu-fr.org/nvidia

Par contre quand je demarre, j'ai un ecran noir, le pointeur de souris mais c'est tout.

Avant, de changer de noyau, quand j'avais un ecran externe branché, ca marchait sans soucis.... là plus rien du tout.... plus d'ecran externe non plus !

Du coup quand je lance en mode console, j'ai bien mes 2 ecrans...

Un peu perdu là, des idées?

version noyau :

4.8.0-34-generic

xrandr :

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected primary 1920x1080+0+0 0mm x 0mm
   1920x1080     77.00* 

fichier /var/log/Xorg.0.log

[    60.561] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    60.561] X Protocol Version 11, Revision 0
[    60.561] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[    60.561] Current Operating System: Linux stephane-laptop3 4.8.0-34-generic #36-Ubuntu SMP Wed Dec 21 17:24:18 UTC 2016 x86_64
[    60.562] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-34-generic.efi.signed root=/dev/mapper/kubuntu--vg-root ro recovery nomodeset
[    60.562] Build Date: 02 November 2016  10:06:55PM
[    60.562] xorg-server 2:1.18.4-1ubuntu6.1 (For technical support please see http://www.ubuntu.com/support) 
[    60.562] Current version of pixman: 0.33.6
[    60.562]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    60.562] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    60.562] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 16 09:42:06 2017
[    60.617] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    60.760] (==) No Layout section.  Using the first Screen section.
[    60.760] (==) No screen section available. Using defaults.
[    60.760] (**) |-->Screen "Default Screen Section" (0)
[    60.760] (**) |   |-->Monitor "<default monitor>"
[    60.813] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    60.813] (==) Automatically adding devices
[    60.813] (==) Automatically enabling devices
[    60.813] (==) Automatically adding GPU devices
[    60.813] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    61.642] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    61.642]    Entry deleted from font path.
[    61.642] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    61.642]    Entry deleted from font path.
[    61.642] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.                                                                           
[    61.642]    Entry deleted from font path.                                                                                                           
[    61.647] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.                                                                           
[    61.647]    Entry deleted from font path.                                                                                                           
[    61.647] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.                                                                            
[    61.647]    Entry deleted from font path.                                                                                                           
[    61.647] (==) FontPath set to:                                                                                                                      
        /usr/share/fonts/X11/misc,                                                                                                                      
        /usr/share/fonts/X11/Type1,                                                                                                                     
        built-ins                                                                                                                                       
[    61.647] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"                    
[    61.647] (II) The server relies on udev to provide the list of input devices.                                                                       
        If no devices become available, reconfigure udev or disable AutoAddDevices.                                                                     
[    61.838] (II) Loader magic: 0x564b11654020                                                                                                          
[    61.838] (II) Module ABI versions:                                                                                                                  
[    61.838]    X.Org ANSI C Emulation: 0.4                                                                                                             
[    61.838]    X.Org Video Driver: 20.0                                                                                                                
[    61.838]    X.Org XInput driver : 22.1                                                                                                              
[    61.838]    X.Org Server Extension : 9.0                                                                                                            
[    61.839] (++) using VT number 7                                                                                                                     
                                                                                                                                                        
[    61.839] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    61.840] (--) PCI:*(0:0:2:0) 8086:0a16:1043:13ad rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    61.840] (--) PCI: (0:4:0:0) 10de:1290:1043:13ad rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    61.840] (II) LoadModule: "glx"
[    62.279] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    64.316] (II) Module glx: vendor="X.Org Foundation"
[    66.824]    compiled for 1.18.4, module version = 1.0.0
[    66.824]    ABI class: X.Org Server Extension, version 9.0
[    66.824] (==) AIGLX enabled
[    66.824] (==) Matched modesetting as autoconfigured driver 0
[    66.824] (==) Matched fbdev as autoconfigured driver 1
[    66.824] (==) Matched vesa as autoconfigured driver 2
[    66.824] (==) Assigned the driver to the xf86ConfigLayout
[    66.824] (II) LoadModule: "modesetting"
[    66.845] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    66.894] (II) Module modesetting: vendor="X.Org Foundation"
[    66.894]    compiled for 1.18.4, module version = 1.18.4
[    66.894]    Module class: X.Org Video Driver
[    66.894]    ABI class: X.Org Video Driver, version 20.0
[    66.894] (II) LoadModule: "fbdev"
[    66.894] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    66.929] (II) Module fbdev: vendor="X.Org Foundation"
[    66.929]    compiled for 1.18.1, module version = 0.4.4
[    66.929]    Module class: X.Org Video Driver
[    66.929]    ABI class: X.Org Video Driver, version 20.0
[    66.929] (II) LoadModule: "vesa"
[    66.929] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    67.106] (II) Module vesa: vendor="X.Org Foundation"
[    67.106]    compiled for 1.18.1, module version = 2.3.4
[    67.106]    Module class: X.Org Video Driver
[    67.106]    ABI class: X.Org Video Driver, version 20.0
[    67.106] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    67.106] (II) FBDEV: driver for framebuffer: fbdev
[    67.106] (II) VESA: driver for VESA chipsets: vesa
[    67.111] (EE) open /dev/dri/card0: No such file or directory
[    67.111] (WW) Falling back to old probe method for modesetting
[    67.111] (EE) open /dev/dri/card0: No such file or directory
[    67.111] (II) Loading sub module "fbdevhw"
[    67.111] (II) LoadModule: "fbdevhw"
[    67.111] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    67.761] (II) Module fbdevhw: vendor="X.Org Foundation"
[    67.761]    compiled for 1.18.4, module version = 0.0.2
[    67.761]    ABI class: X.Org Video Driver, version 20.0
[    67.761] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[    67.761] (II) FBDEV(1): using default device
[    67.761] (WW) Falling back to old probe method for vesa
[    67.762] (EE) Screen 0 deleted because of no matching config section.
[    67.762] (II) UnloadModule: "modesetting"
[    67.762] (II) FBDEV(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    67.762] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    67.762] (==) FBDEV(0): RGB weight 888
[    67.762] (==) FBDEV(0): Default visual is TrueColor
[    67.762] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    67.762] (II) FBDEV(0): hardware: EFI VGA (video memory: 8128kB)
[    67.762] (II) FBDEV(0): checking modes against framebuffer device...
[    67.762] (II) FBDEV(0): checking modes against monitor...
[    67.762] (--) FBDEV(0): Virtual size is 1920x1080 (pitch 1920)
[    67.762] (**) FBDEV(0):  Built-in mode "current": 207.4 MHz, 85.3 kHz, 77.2 Hz
[    67.762] (II) FBDEV(0): Modeline "current"x0.0  207.38  1920 1952 2192 2432  1080 1084 1088 1104 -hsync -vsync -csync (85.3 kHz b)
[    67.762] (==) FBDEV(0): DPI set to (96, 96)
[    67.762] (II) Loading sub module "fb"
[    67.762] (II) LoadModule: "fb"
[    67.762] (II) Loading /usr/lib/xorg/modules/libfb.so
[    68.025] (II) Module fb: vendor="X.Org Foundation"
[    68.025]    compiled for 1.18.4, module version = 1.0.0
[    68.025]    ABI class: X.Org ANSI C Emulation, version 0.4
[    68.025] (**) FBDEV(0): using shadow framebuffer
[    68.025] (II) Loading sub module "shadow"
[    68.025] (II) LoadModule: "shadow"
[    68.026] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    68.046] (II) Module shadow: vendor="X.Org Foundation"
[    68.046]    compiled for 1.18.4, module version = 1.1.0
[    68.046]    ABI class: X.Org ANSI C Emulation, version 0.4
[    68.046] (II) UnloadModule: "vesa"
[    68.046] (II) Unloading vesa
[    68.046] (==) Depth 24 pixmap format is 32 bpp
[    68.046] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[    68.344] (==) FBDEV(0): Backing store enabled
[    68.372] (==) FBDEV(0): DPMS enabled
[    68.373] (==) RandR enabled
[    68.500] (II) SELinux: Disabled on system
[    68.503] (II) AIGLX: Screen 0 is not DRI2 capable
[    68.503] (EE) AIGLX: reverting to software rendering
[    71.032] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    71.032] (II) AIGLX: Loaded and initialized swrast
[    71.032] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    71.535] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    71.535] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    71.535] (II) LoadModule: "evdev"
[    71.557] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    71.612] (II) Module evdev: vendor="X.Org Foundation"
[    71.612]    compiled for 1.18.3, module version = 2.10.2
[    71.612]    Module class: X.Org XInput Driver
[    71.612]    ABI class: X.Org XInput driver, version 22.1
[    71.612] (II) Using input driver 'evdev' for 'Power Button'
[    71.612] (**) Power Button: always reports core events
[    71.612] (**) evdev: Power Button: Device: "/dev/input/event2"
[    71.612] (--) evdev: Power Button: Vendor 0 Product 0x1
[    71.612] (--) evdev: Power Button: Found keys
[    71.612] (II) evdev: Power Button: Configuring as keyboard
[    71.612] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    71.612] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    71.612] (**) Option "xkb_rules" "evdev"
[    71.612] (**) Option "xkb_model" "pc105"
[    71.612] (**) Option "xkb_layout" "fr"
[    71.640] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event6)
[    71.640] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[    71.640] (II) Using input driver 'evdev' for 'Asus Wireless Radio Control'
[    71.640] (**) Asus Wireless Radio Control: always reports core events
[    71.640] (**) evdev: Asus Wireless Radio Control: Device: "/dev/input/event6"
[    71.640] (--) evdev: Asus Wireless Radio Control: Vendor 0x1043 Product 0
[    71.640] (--) evdev: Asus Wireless Radio Control: Found keys
[    71.640] (II) evdev: Asus Wireless Radio Control: Configuring as keyboard
[    71.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input13/event6"
[    71.640] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    71.640] (**) Option "xkb_rules" "evdev"
[    71.640] (**) Option "xkb_model" "pc105"
[    71.640] (**) Option "xkb_layout" "fr"
[    71.640] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    71.640] (II) No input driver specified, ignoring this device.
[    71.640] (II) This device may have been added with another device file.
[    71.641] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    71.641] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    71.641] (II) Using input driver 'evdev' for 'Sleep Button'
[    71.641] (**) Sleep Button: always reports core events
[    71.641] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    71.641] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    71.641] (--) evdev: Sleep Button: Found keys
[    71.641] (II) evdev: Sleep Button: Configuring as keyboard
[    71.641] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    71.641] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    71.641] (**) Option "xkb_rules" "evdev"
[    71.641] (**) Option "xkb_model" "pc105"
[    71.641] (**) Option "xkb_layout" "fr"
[    71.641] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event4)
[    71.641] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[    71.641] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[    71.641] (**) Logitech USB Laser Mouse: always reports core events
[    71.641] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event4"
[    71.700] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc062
[    71.700] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[    71.700] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[    71.700] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[    71.700] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[    71.700] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[    71.700] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[    71.700] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[    71.700] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    71.700] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C062.0001/input/input12/event4"
[    71.700] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 9)
[    71.700] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[    71.701] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[    71.701] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[    71.701] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[    71.701] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[    71.702] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[    71.702] (II) No input driver specified, ignoring this device.
[    71.702] (II) This device may have been added with another device file.
[    71.703] (II) config/udev: Adding input device HD WebCam (/dev/input/event10)
[    71.703] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[    71.703] (II) Using input driver 'evdev' for 'HD WebCam'
[    71.703] (**) HD WebCam: always reports core events
[    71.703] (**) evdev: HD WebCam: Device: "/dev/input/event10"
[    71.703] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2987
[    71.703] (--) evdev: HD WebCam: Found keys
[    71.703] (II) evdev: HD WebCam: Configuring as keyboard
[    71.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input17/event10"
[    71.703] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 10)
[    71.703] (**) Option "xkb_rules" "evdev"
[    71.703] (**) Option "xkb_model" "pc105"
[    71.703] (**) Option "xkb_layout" "fr"
[    71.704] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event7)
[    71.705] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "evdev touchscreen catchall"
[    71.705] (II) Using input driver 'evdev' for 'Atmel Atmel maXTouch Digitizer'
[    71.705] (**) Atmel Atmel maXTouch Digitizer: always reports core events
[    71.705] (**) evdev: Atmel Atmel maXTouch Digitizer: Device: "/dev/input/event7"
[    71.764] (--) evdev: Atmel Atmel maXTouch Digitizer: Vendor 0x3eb Product 0x8a03
[    71.764] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute axes
[    71.764] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute multitouch axes
[    71.764] (II) evdev: Atmel Atmel maXTouch Digitizer: No buttons found, faking one.
[    71.764] (--) evdev: Atmel Atmel maXTouch Digitizer: Found x and y absolute axes
[    71.764] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute touchscreen
[    71.764] (II) evdev: Atmel Atmel maXTouch Digitizer: Configuring as touchscreen
[    71.764] (**) evdev: Atmel Atmel maXTouch Digitizer: YAxisMapping: buttons 4 and 5
[    71.764] (**) evdev: Atmel Atmel maXTouch Digitizer: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    71.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A03.0002/input/input14/event7"
[    71.764] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 11)
[    71.764] (II) evdev: Atmel Atmel maXTouch Digitizer: initialized for absolute axes.
[    71.765] (**) Atmel Atmel maXTouch Digitizer: (accel) keeping acceleration scheme 1
[    71.765] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration profile 0
[    71.765] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000
[    71.765] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4
[    71.766] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse2)
[    71.766] (II) No input driver specified, ignoring this device.
[    71.766] (II) This device may have been added with another device file.
[    71.766] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[    71.766] (II) No input driver specified, ignoring this device.
[    71.766] (II) This device may have been added with another device file.
[    71.767] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[    71.767] (II) No input driver specified, ignoring this device.
[    71.767] (II) This device may have been added with another device file.
[    71.768] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    71.768] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    71.768] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    71.768] (**) AT Translated Set 2 keyboard: always reports core events
[    71.768] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    71.768] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    71.768] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    71.768] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    71.768] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    71.768] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    71.768] (**) Option "xkb_rules" "evdev"
[    71.768] (**) Option "xkb_model" "pc105"
[    71.768] (**) Option "xkb_layout" "fr"
[    71.769] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5)
[    71.769] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    71.769] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    71.769] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    71.769] (II) LoadModule: "synaptics"
[    71.770] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    71.790] (II) Module synaptics: vendor="X.Org Foundation"
[    71.790]    compiled for 1.18.3, module version = 1.8.3
[    71.790]    Module class: X.Org XInput Driver
[    71.790]    ABI class: X.Org XInput driver, version 22.1
[    71.790] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    71.790] (**) ETPS/2 Elantech Touchpad: always reports core events
[    71.790] (**) Option "Device" "/dev/input/event5"
[    71.852] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    71.852] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2960 (res 32)
[    71.852] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1924 (res 32)
[    71.852] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    71.852] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    71.852] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    71.852] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    71.852] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    71.852] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    71.852] (**) ETPS/2 Elantech Touchpad: always reports core events
[    71.884] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event5"
[    71.884] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    71.884] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    71.884] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    71.884] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
[    71.884] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    71.884] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    71.884] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    71.884] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    71.884] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    71.884] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    71.884] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[  4829.598] (II) config/udev: Adding input device Logitech K810 (/dev/input/event11)
[  4829.598] (**) Logitech K810: Applying InputClass "evdev keyboard catchall"
[  4829.598] (II) Using input driver 'evdev' for 'Logitech K810'
[  4829.598] (**) Logitech K810: always reports core events
[  4829.598] (**) evdev: Logitech K810: Device: "/dev/input/event11"
[  4829.598] (--) evdev: Logitech K810: Vendor 0x46d Product 0xb319
[  4829.598] (--) evdev: Logitech K810: Found absolute axes
[  4829.598] (II) evdev: Logitech K810: Forcing absolute x/y axes to exist.
[  4829.598] (--) evdev: Logitech K810: Found keys
[  4829.598] (II) evdev: Logitech K810: Forcing relative x/y axes to exist.
[  4829.598] (II) evdev: Logitech K810: Configuring as mouse
[  4829.598] (II) evdev: Logitech K810: Configuring as keyboard
[  4829.598] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/bluetooth/hci0/hci0:256/0005:046D:B319.0004/input/input18/event11"
[  4829.598] (II) XINPUT: Adding extended input device "Logitech K810" (type: KEYBOARD, id 14)
[  4829.598] (**) Option "xkb_rules" "evdev"
[  4829.598] (**) Option "xkb_model" "pc105"
[  4829.598] (**) Option "xkb_layout" "fr"
[  4829.598] (WW) Option "xkb_variant" requires a string value
[  4829.598] (WW) Option "xkb_options" requires a string value
[  4829.599] (II) evdev: Logitech K810: initialized for absolute axes.
[  4829.599] (**) Logitech K810: (accel) keeping acceleration scheme 1
[  4829.599] (**) Logitech K810: (accel) acceleration profile 0
[  4829.599] (**) Logitech K810: (accel) acceleration factor: 2.000
[  4829.599] (**) Logitech K810: (accel) acceleration threshold: 4
[  5787.053] (II) config/udev: Adding input device 00:11:67:11:22:A8 (/dev/input/event12)
[  5787.053] (**) 00:11:67:11:22:A8: Applying InputClass "evdev keyboard catchall"
[  5787.053] (II) Using input driver 'evdev' for '00:11:67:11:22:A8'
[  5787.053] (**) 00:11:67:11:22:A8: always reports core events
[  5787.053] (**) evdev: 00:11:67:11:22:A8: Device: "/dev/input/event12"
[  5787.053] (--) evdev: 00:11:67:11:22:A8: Vendor 0 Product 0
[  5787.053] (--) evdev: 00:11:67:11:22:A8: Found keys
[  5787.053] (II) evdev: 00:11:67:11:22:A8: Configuring as keyboard
[  5787.053] (**) Option "config_info" "udev:/sys/devices/virtual/input/input19/event12"
[  5787.053] (II) XINPUT: Adding extended input device "00:11:67:11:22:A8" (type: KEYBOARD, id 15)
[  5787.053] (**) Option "xkb_rules" "evdev"
[  5787.053] (**) Option "xkb_model" "pc105"
[  5787.053] (**) Option "xkb_layout" "fr"
[  5787.053] (WW) Option "xkb_variant" requires a string value
[  5787.053] (WW) Option "xkb_options" requires a string value

Dernière modification par siddhartha (Le 16/01/2017, à 12:03)


consultant internet / webmaster
www.stephane-desrousseaux.fr

Hors ligne

#5 Le 16/01/2017, à 23:02

siddhartha

Re : 16.10 Ecran noir > Configuration Bumblebee

Je continue de ramer...

Apres des recherches, je suis revenu vers Bumblebee en suivant la page https://doc.ubuntu-fr.org/bumblebee

Je pense que j'ai un soucis de configuration de /etc/bumblebee/bumblebee.conf

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart                                                                           
# to take effect.                                                                                                                                       
[bumblebeed]                                                                                                                                            
# The secondary Xorg server DISPLAY number                                                                                                              
VirtualDisplay=:8                                                                                                                                       
# Should the unused Xorg server be kept running? Set this to true if waiting                                                                            
# for X to be ready is too long and don't need power management at all.                                                                                 
KeepUnusedXServer=false                                                                                                                                 
# The name of the Bumbleblee server group name (GID name)                                                                                               
ServerGroup=bumblebee                                                                                                                                   
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee                                                                         
# server exits.                                                                                                                                         
TurnCardOffAtExit=false                                                                                                                                 
# The default behavior of '-f' option on optirun. If set to "true", '-f' will                                                                           
# be ignored.                                                                                                                                           
NoEcoModeOverride=false                                                                                                                                 
# The Driver used by Bumblebee server. If this value is not set (or empty),                                                                             
# auto-detection is performed. The available drivers are nvidia and nouveau                                                                             
# (See also the driver-specific sections below)                                                                                                         
Driver=                                                                                                                                                 
# Directory with a dummy config file to pass as a -configdir to secondary X                                                                             
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Quand je lance :
optirun glxgears

[  495.351310] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[  495.351357] [ERROR]Aborting because fallback start is disabled.

et optirun -vv --debug bash donne

[  212.608595] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  212.609181] [DEBUG]optirun version 3.2.1 starting...
[  212.609201] [DEBUG]Active configuration:
[  212.609206] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  212.609210] [DEBUG] X display: :8
[  212.609215] [DEBUG] LD_LIBRARY_PATH: 
[  212.609219] [DEBUG] Socket path: /var/run/bumblebee.socket
[  212.609226] [DEBUG] Accel/display bridge: auto
[  212.609231] [DEBUG] VGL Compression: proxy
[  212.609240] [DEBUG] VGLrun extra options: 
[  212.609249] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  212.609314] [DEBUG]Using auto-detected bridge primus
[  212.609682] [INFO]Response: No - error: Could not load GPU driver

[  212.609709] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[  212.609724] [DEBUG]Socket closed.
[  212.609751] [ERROR]Aborting because fallback start is disabled.
[  212.609763] [DEBUG]Killing all remaining processes.

Si je mets Driver=nvidia dans /etc/bumblebee/bumblebee.conf comme conseillé sur plusieurs forums :

optirun glxgears

[  598.245964] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[  598.245988] [ERROR]Could not connect to bumblebee daemon - is it running?

et optirun -vv --debug bash donne

[  732.793926] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  732.794221] [INFO]Configured driver: nvidia
[  732.794276] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[  732.794285] [DEBUG]Socket closed.
[  732.794305] [ERROR]Could not connect to bumblebee daemon - is it running?

des idées ?


consultant internet / webmaster
www.stephane-desrousseaux.fr

Hors ligne

#6 Le 16/01/2017, à 23:03

siddhartha

Re : 16.10 Ecran noir > Configuration Bumblebee

Grace à Bumblebee j'ai récupéré mon ecran externe en HDMI mais plus sur mon display port en Haute def sad


consultant internet / webmaster
www.stephane-desrousseaux.fr

Hors ligne