Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/11/2016, à 17:44

thibault.le

Pilotes NVIDIA et Login Loop

Bonjour à tous,

J'ai besoins d'utiliser les pilotes propriétaires NVIDIA de ma carte graphique NVIDIA GeForce GT 740M avec Ubuntu 16.04.

J'avais utilisé l'interface graphique Software & Updates, rubrique Additional Drivers pour sélectionner le driver nvidia-367, ce qui avait bien fonctionné !
J'ignore pourquoi mais cela ne marche plus, je n'ai plus accès à l'interface de mon bureau avec ces pilotes. La seule possibilité que j'ai est de faire ctr+alt+F1 lors du login et de purger les pilotes NVIDIA au profit du pilote Nouveau...

J'ai aussi testé d'autres façons d'obtenir les drivers mais cela revient au même :
sudo apt-get install nvidia-367
ubuntu-drivers autoinstall

Je ne sais pas si cela était nécessaire mais j'ai aussi essayé nvidia-xconfig mais pas de changement non plus...

Voici le fichier log Xorg.0.log :

[    46.652] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    46.652] X Protocol Version 11, Revision 0
[    46.652] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu
[    46.652] Current Operating System: Linux thibault-N56VB 4.4.0-47-generic #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016 x86_64
[    46.652] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-47-generic.efi.signed root=UUID=7d6bfe80-8a2f-4af7-a21d-5f7c3251ebee ro plymouth:debug drm.debug=0xe
[    46.652] Build Date: 14 September 2016  03:33:24PM
[    46.652] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please see http://www.ubuntu.com/support) 
[    46.652] Current version of pixman: 0.33.6
[    46.652] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    46.652] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    46.652] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 15:08:04 2016
[    46.652] (==) Using config file: "/etc/X11/xorg.conf"
[    46.652] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    46.652] (==) ServerLayout "layout"
[    46.652] (**) |-->Screen "nvidia" (0)
[    46.653] (**) |   |-->Monitor "<default monitor>"
[    46.653] (**) |   |-->Device "nvidia"
[    46.653] (**) |   |-->GPUDevice "nvidia"
[    46.653] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[    46.653] (**) |-->Inactive Device "intel"
[    46.653] (==) Automatically adding devices
[    46.653] (==) Automatically enabling devices
[    46.653] (==) Automatically adding GPU devices
[    46.653] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    46.653] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    46.653] 	Entry deleted from font path.
[    46.653] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    46.653] 	Entry deleted from font path.
[    46.653] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    46.653] 	Entry deleted from font path.
[    46.653] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    46.653] 	Entry deleted from font path.
[    46.653] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    46.653] 	Entry deleted from font path.
[    46.653] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    46.653] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    46.653] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    46.653] (II) Loader magic: 0x55a9c69a0dc0
[    46.653] (II) Module ABI versions:
[    46.653] 	X.Org ANSI C Emulation: 0.4
[    46.653] 	X.Org Video Driver: 20.0
[    46.653] 	X.Org XInput driver : 22.1
[    46.653] 	X.Org Server Extension : 9.0
[    46.653] (++) using VT number 7

[    46.653] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    46.654] (II) xfree86: Adding drm device (/dev/dri/card0)
[    46.654] (II) xfree86: Adding drm device (/dev/dri/card1)
[    46.655] (--) PCI:*(0:0:2:0) 8086:0166:1043:1477 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    46.655] (--) PCI: (0:1:0:0) 10de:0fdf:1043:1477 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    46.655] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    46.655] (II) "glx" will be loaded by default.
[    46.655] (II) LoadModule: "glx"
[    46.655] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    46.659] (II) Module glx: vendor="NVIDIA Corporation"
[    46.659] 	compiled for 4.0.2, module version = 1.0.0
[    46.659] 	Module class: X.Org Server Extension
[    46.659] (II) NVIDIA GLX Module  367.57  Mon Oct  3 20:28:17 PDT 2016
[    46.659] (II) LoadModule: "nvidia"
[    46.659] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    46.659] (II) Module nvidia: vendor="NVIDIA Corporation"
[    46.659] 	compiled for 4.0.2, module version = 1.0.0
[    46.659] 	Module class: X.Org Video Driver
[    46.659] (II) LoadModule: "modesetting"
[    46.659] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    46.659] (II) Module modesetting: vendor="X.Org Foundation"
[    46.659] 	compiled for 1.18.4, module version = 1.18.4
[    46.659] 	Module class: X.Org Video Driver
[    46.659] 	ABI class: X.Org Video Driver, version 20.0
[    46.659] (II) NVIDIA dlloader X Driver  367.57  Mon Oct  3 20:03:48 PDT 2016
[    46.659] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    46.659] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    46.659] (II) Loading sub module "fb"
[    46.659] (II) LoadModule: "fb"
[    46.660] (II) Loading /usr/lib/xorg/modules/libfb.so
[    46.660] (II) Module fb: vendor="X.Org Foundation"
[    46.660] 	compiled for 1.18.4, module version = 1.0.0
[    46.660] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    46.660] (II) Loading sub module "wfb"
[    46.660] (II) LoadModule: "wfb"
[    46.660] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    46.660] (II) Module wfb: vendor="X.Org Foundation"
[    46.660] 	compiled for 1.18.4, module version = 1.0.0
[    46.660] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    46.660] (II) Loading sub module "ramdac"
[    46.660] (II) LoadModule: "ramdac"
[    46.660] (II) Module "ramdac" already built-in
[    46.660] (II) modeset(G0): using drv /dev/dri/card1
[    46.660] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[    46.660] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    46.660] (==) NVIDIA(0): RGB weight 888
[    46.660] (==) NVIDIA(0): Default visual is TrueColor
[    46.660] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    46.661] (**) NVIDIA(0): Option "ConstrainCursor" "off"
[    46.661] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
[    46.661] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[    46.661] (**) NVIDIA(0): Enabling 2D acceleration
[    46.773] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK107) at PCI:1:0:0 (GPU-0)
[    46.773] (--) NVIDIA(0): Memory: 2097152 kBytes
[    46.773] (--) NVIDIA(0): VideoBIOS: 80.07.95.00.07
[    46.774] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    46.774] (II) NVIDIA(0): Validated MetaModes:
[    46.774] (II) NVIDIA(0):     "NULL"
[    46.774] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    46.774] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    46.774] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    46.774] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    46.774] (**) modeset(G0): Option "AccelMethod" "None"
[    46.774] (==) modeset(G0): RGB weight 888
[    46.774] (==) modeset(G0): Default visual is TrueColor
[    46.774] (**) modeset(G0): glamor disabled
[    46.774] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[    46.774] (II) modeset(G0): Output LVDS-1 has no monitor section
[    46.787] (II) modeset(G0): Output VGA-1 has no monitor section
[    46.912] (II) modeset(G0): Output HDMI-1 has no monitor section
[    46.912] (II) modeset(G0): Output DP-1 has no monitor section
[    46.912] (II) modeset(G0): EDID for output LVDS-1
[    46.912] (II) modeset(G0): Manufacturer: AUO  Model: 24ec  Serial#: 0
[    46.912] (II) modeset(G0): Year: 2011  Week: 0
[    46.912] (II) modeset(G0): EDID Version: 1.4
[    46.912] (II) modeset(G0): Digital Display Input
[    46.912] (II) modeset(G0): 6 bits per channel
[    46.912] (II) modeset(G0): Digital interface is undefined
[    46.912] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    46.912] (II) modeset(G0): Gamma: 2.20
[    46.912] (II) modeset(G0): No DPMS capabilities specified
[    46.912] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[    46.913] (II) modeset(G0): First detailed timing is preferred mode
[    46.913] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    46.913] (II) modeset(G0): redX: 0.580 redY: 0.335   greenX: 0.330 greenY: 0.565
[    46.913] (II) modeset(G0): blueX: 0.155 blueY: 0.140   whiteX: 0.313 whiteY: 0.329
[    46.913] (II) modeset(G0): Manufacturer's mask: 0
[    46.913] (II) modeset(G0): Supported detailed timing:
[    46.913] (II) modeset(G0): clock: 70.2 MHz   Image Size:  344 x 193 mm
[    46.913] (II) modeset(G0): h_active: 1366  h_sync: 1382  h_sync_end 1398 h_blank_end 1484 h_border: 0
[    46.913] (II) modeset(G0): v_active: 768  v_sync: 771  v_sync_end 785 v_blanking: 788 v_border: 0
[    46.913] (II) modeset(G0): Unknown vendor-specific block f
[    46.913] (II) modeset(G0):  AUO
[    46.913] (II) modeset(G0):  B156XTN02.4
[    46.913] (II) modeset(G0): EDID (in hex):
[    46.913] (II) modeset(G0): 	00ffffffffffff0006afec2400000000
[    46.913] (II) modeset(G0): 	001501049022137802bbf59455549027
[    46.913] (II) modeset(G0): 	23505400000001010101010101010101
[    46.913] (II) modeset(G0): 	0101010101016c1b5676500014301010
[    46.913] (II) modeset(G0): 	3e0058c1100000180000000f00000000
[    46.913] (II) modeset(G0): 	00000000000000000020000000fe0041
[    46.913] (II) modeset(G0): 	554f0a202020202020202020000000fe
[    46.913] (II) modeset(G0): 	004231353658544e30322e34200a00e7
[    46.913] (II) modeset(G0): Printing probed modes for output LVDS-1
[    46.913] (II) modeset(G0): Modeline "1366x768"x60.0   70.20  1366 1382 1398 1484  768 771 785 788 -hsync -vsync (47.3 kHz eP)
[    46.913] (II) modeset(G0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    46.913] (II) modeset(G0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    46.913] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    46.913] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    46.913] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    46.913] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    46.913] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    46.913] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    46.913] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    46.913] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    46.913] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    46.913] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    46.913] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    46.913] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    46.913] (II) modeset(G0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    46.913] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    46.913] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    46.913] (II) modeset(G0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    46.913] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    46.913] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    46.913] (II) modeset(G0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    46.913] (II) modeset(G0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    46.913] (II) modeset(G0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    46.913] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    46.913] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    46.913] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    46.913] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    46.926] (II) modeset(G0): EDID for output VGA-1
[    46.926] (II) modeset(G0): Manufacturer: ACI  Model: 23e1  Serial#: 16843009
[    46.926] (II) modeset(G0): Year: 2014  Week: 10
[    46.926] (II) modeset(G0): EDID Version: 1.3
[    46.926] (II) modeset(G0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    46.926] (II) modeset(G0): Sync:  Separate  Composite
[    46.926] (II) modeset(G0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    46.926] (II) modeset(G0): Gamma: 2.20
[    46.926] (II) modeset(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    46.926] (II) modeset(G0): First detailed timing is preferred mode
[    46.926] (II) modeset(G0): redX: 0.651 redY: 0.338   greenX: 0.321 greenY: 0.614
[    46.926] (II) modeset(G0): blueX: 0.154 blueY: 0.063   whiteX: 0.313 whiteY: 0.329
[    46.926] (II) modeset(G0): Supported established timings:
[    46.926] (II) modeset(G0): 720x400@70Hz
[    46.926] (II) modeset(G0): 640x480@60Hz
[    46.926] (II) modeset(G0): 640x480@72Hz
[    46.926] (II) modeset(G0): 640x480@75Hz
[    46.926] (II) modeset(G0): 800x600@56Hz
[    46.926] (II) modeset(G0): 800x600@60Hz
[    46.926] (II) modeset(G0): 800x600@72Hz
[    46.926] (II) modeset(G0): 800x600@75Hz
[    46.926] (II) modeset(G0): 1024x768@60Hz
[    46.926] (II) modeset(G0): 1024x768@70Hz
[    46.926] (II) modeset(G0): 1024x768@75Hz
[    46.926] (II) modeset(G0): 1280x1024@75Hz
[    46.926] (II) modeset(G0): 1152x864@75Hz
[    46.926] (II) modeset(G0): Manufacturer's mask: 0
[    46.926] (II) modeset(G0): Supported standard timings:
[    46.926] (II) modeset(G0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    46.926] (II) modeset(G0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    46.926] (II) modeset(G0): #2: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[    46.926] (II) modeset(G0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    46.926] (II) modeset(G0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    46.926] (II) modeset(G0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    46.926] (II) modeset(G0): #6: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    46.926] (II) modeset(G0): Supported detailed timing:
[    46.926] (II) modeset(G0): clock: 148.5 MHz   Image Size:  510 x 290 mm
[    46.926] (II) modeset(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    46.926] (II) modeset(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    46.926] (II) modeset(G0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[    46.926] (II) modeset(G0): Monitor name: VX239
[    46.926] (II) modeset(G0): Serial No: E3LMRS014996
[    46.926] (II) modeset(G0): EDID (in hex):
[    46.926] (II) modeset(G0): 	00ffffffffffff000469e12301010101
[    46.926] (II) modeset(G0): 	0a1801036c331d78eae595a656529d27
[    46.926] (II) modeset(G0): 	105054afcf80714f8180818fb3008140
[    46.926] (II) modeset(G0): 	9500a9400101023a801871382d40582c
[    46.926] (II) modeset(G0): 	4500fe221100001e000000fd00384b1e
[    46.926] (II) modeset(G0): 	530f000a202020202020000000fc0056
[    46.926] (II) modeset(G0): 	583233390a20202020202020000000ff
[    46.926] (II) modeset(G0): 	0045334c4d52533031343939360a0050
[    46.926] (II) modeset(G0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan)
[    46.926] (II) modeset(G0): Printing probed modes for output VGA-1
[    46.926] (II) modeset(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    46.926] (II) modeset(G0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    46.926] (II) modeset(G0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    46.926] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    46.926] (II) modeset(G0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    46.926] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    46.926] (II) modeset(G0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    46.926] (II) modeset(G0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    46.926] (II) modeset(G0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    46.926] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    46.926] (II) modeset(G0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    46.926] (II) modeset(G0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    46.926] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    46.926] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    46.926] (II) modeset(G0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    46.926] (II) modeset(G0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    46.926] (II) modeset(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    46.926] (II) modeset(G0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    47.052] (II) modeset(G0): EDID for output HDMI-1
[    47.052] (II) modeset(G0): EDID for output DP-1
[    47.052] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    47.052] (==) modeset(G0): DPI set to (96, 96)
[    47.052] (II) Loading sub module "fb"
[    47.052] (II) LoadModule: "fb"
[    47.052] (II) Loading /usr/lib/xorg/modules/libfb.so
[    47.052] (II) Module fb: vendor="X.Org Foundation"
[    47.052] 	compiled for 1.18.4, module version = 1.0.0
[    47.053] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    47.053] (II) Loading sub module "shadow"
[    47.053] (II) LoadModule: "shadow"
[    47.053] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    47.053] (II) Module shadow: vendor="X.Org Foundation"
[    47.053] 	compiled for 1.18.4, module version = 1.1.0
[    47.053] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    47.053] (--) Depth 24 pixmap format is 32 bpp
[    47.053] (==) modeset(G0): Backing store enabled
[    47.053] (==) modeset(G0): Silken mouse enabled
[    47.053] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    47.053] (==) modeset(G0): DPMS enabled
[    47.053] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[    47.053] (WW) modeset(G0): Option "IgnoreDisplayDevices" is not used
[    47.110] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[    47.110] (II) NVIDIA:     access.
[    47.127] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[    47.128] (II) NVIDIA(0): Setting mode "NULL"
[    47.131] (==) NVIDIA(0): Disabling shared memory pixmaps
[    47.131] (==) NVIDIA(0): Backing store enabled
[    47.131] (==) NVIDIA(0): Silken mouse enabled
[    47.131] (==) NVIDIA(0): DPMS enabled
[    47.131] (II) Loading sub module "dri2"
[    47.131] (II) LoadModule: "dri2"
[    47.131] (II) Module "dri2" already built-in
[    47.131] (II) NVIDIA(0): [DRI2] Setup complete
[    47.131] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    47.131] (--) RandR disabled
[    47.134] (II) SELinux: Disabled on system
[    47.134] (II) Initializing extension GLX
[    47.134] (II) Indirect GLX disabled.
[    47.135] (II) modeset(G0): Damage tracking initialized
[    47.163] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    47.163] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    47.163] (II) LoadModule: "evdev"
[    47.163] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    47.163] (II) Module evdev: vendor="X.Org Foundation"
[    47.163] 	compiled for 1.18.1, module version = 2.10.1
[    47.163] 	Module class: X.Org XInput Driver
[    47.163] 	ABI class: X.Org XInput driver, version 22.1
[    47.163] (II) Using input driver 'evdev' for 'Power Button'
[    47.163] (**) Power Button: always reports core events
[    47.163] (**) evdev: Power Button: Device: "/dev/input/event2"
[    47.163] (--) evdev: Power Button: Vendor 0 Product 0x1
[    47.163] (--) evdev: Power Button: Found keys
[    47.163] (II) evdev: Power Button: Configuring as keyboard
[    47.163] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    47.163] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    47.163] (**) Option "xkb_rules" "evdev"
[    47.164] (**) Option "xkb_model" "pc105"
[    47.164] (**) Option "xkb_layout" "fr"
[    47.177] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    47.177] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    47.177] (II) Using input driver 'evdev' for 'Video Bus'
[    47.177] (**) Video Bus: always reports core events
[    47.177] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    47.178] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    47.178] (--) evdev: Video Bus: Found keys
[    47.178] (II) evdev: Video Bus: Configuring as keyboard
[    47.178] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event5"
[    47.178] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    47.178] (**) Option "xkb_rules" "evdev"
[    47.178] (**) Option "xkb_model" "pc105"
[    47.178] (**) Option "xkb_layout" "fr"
[    47.178] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    47.178] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    47.178] (II) Using input driver 'evdev' for 'Video Bus'
[    47.178] (**) Video Bus: always reports core events
[    47.178] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    47.178] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    47.178] (--) evdev: Video Bus: Found keys
[    47.178] (II) evdev: Video Bus: Configuring as keyboard
[    47.178] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input12/event4"
[    47.178] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    47.178] (**) Option "xkb_rules" "evdev"
[    47.178] (**) Option "xkb_model" "pc105"
[    47.178] (**) Option "xkb_layout" "fr"
[    47.178] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    47.178] (II) No input driver specified, ignoring this device.
[    47.178] (II) This device may have been added with another device file.
[    47.179] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    47.179] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    47.179] (II) Using input driver 'evdev' for 'Sleep Button'
[    47.179] (**) Sleep Button: always reports core events
[    47.179] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    47.179] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    47.179] (--) evdev: Sleep Button: Found keys
[    47.179] (II) evdev: Sleep Button: Configuring as keyboard
[    47.179] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    47.179] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    47.179] (**) Option "xkb_rules" "evdev"
[    47.179] (**) Option "xkb_model" "pc105"
[    47.179] (**) Option "xkb_layout" "fr"
[    47.179] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event6)
[    47.179] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[    47.179] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[    47.179] (**) Microsoft Wired Keyboard 600: always reports core events
[    47.179] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event6"
[    47.179] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[    47.179] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[    47.179] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[    47.179] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:045E:0750.0001/input/input14/event6"
[    47.179] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[    47.180] (**) Option "xkb_rules" "evdev"
[    47.180] (**) Option "xkb_model" "pc105"
[    47.180] (**) Option "xkb_layout" "fr"
[    47.180] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event7)
[    47.180] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[    47.180] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[    47.180] (**) Microsoft Wired Keyboard 600: always reports core events
[    47.180] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event7"
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Fake MT device detected
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[    47.180] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[    47.180] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[    47.180] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[    47.180] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[    47.180] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[    47.180] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[    47.180] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    47.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:045E:0750.0002/input/input15/event7"
[    47.180] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 11)
[    47.180] (**) Option "xkb_rules" "evdev"
[    47.180] (**) Option "xkb_model" "pc105"
[    47.180] (**) Option "xkb_layout" "fr"
[    47.180] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[    47.180] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[    47.181] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[    47.181] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[    47.181] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[    47.181] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[    47.181] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[    47.181] (II) No input driver specified, ignoring this device.
[    47.181] (II) This device may have been added with another device file.
[    47.181] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event8)
[    47.181] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    47.181] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[    47.181] (**) PixArt USB Optical Mouse: always reports core events
[    47.181] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event8"
[    47.181] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[    47.181] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[    47.181] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[    47.181] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[    47.181] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[    47.181] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[    47.181] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[    47.181] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    47.181] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    47.181] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:093A:2510.0003/input/input16/event8"
[    47.181] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 12)
[    47.181] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[    47.181] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[    47.181] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[    47.181] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[    47.181] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[    47.182] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[    47.182] (II) No input driver specified, ignoring this device.
[    47.182] (II) This device may have been added with another device file.
[    47.182] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event14)
[    47.182] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[    47.182] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[    47.182] (**) ASUS USB2.0 Webcam: always reports core events
[    47.182] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event14"
[    47.182] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x1bcf Product 0x2883
[    47.182] (--) evdev: ASUS USB2.0 Webcam: Found keys
[    47.182] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[    47.182] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21/event14"
[    47.182] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 13)
[    47.182] (**) Option "xkb_rules" "evdev"
[    47.182] (**) Option "xkb_model" "pc105"
[    47.182] (**) Option "xkb_layout" "fr"
[    47.182] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    47.182] (II) No input driver specified, ignoring this device.
[    47.182] (II) This device may have been added with another device file.
[    47.183] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    47.183] (II) No input driver specified, ignoring this device.
[    47.183] (II) This device may have been added with another device file.
[    47.183] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    47.183] (II) No input driver specified, ignoring this device.
[    47.183] (II) This device may have been added with another device file.
[    47.183] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event13)
[    47.183] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    47.183] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[    47.183] (**) Asus WMI hotkeys: always reports core events
[    47.183] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event13"
[    47.183] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    47.183] (--) evdev: Asus WMI hotkeys: Found keys
[    47.183] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    47.183] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input20/event13"
[    47.183] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14)
[    47.183] (**) Option "xkb_rules" "evdev"
[    47.183] (**) Option "xkb_model" "pc105"
[    47.183] (**) Option "xkb_layout" "fr"
[    47.183] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    47.183] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    47.183] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    47.183] (**) AT Translated Set 2 keyboard: always reports core events
[    47.183] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    47.183] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    47.183] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    47.183] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    47.183] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    47.183] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    47.183] (**) Option "xkb_rules" "evdev"
[    47.183] (**) Option "xkb_model" "pc105"
[    47.184] (**) Option "xkb_layout" "fr"
[    47.184] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[    47.184] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    47.184] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[    47.184] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    47.184] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    47.184] (II) LoadModule: "synaptics"
[    47.184] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    47.184] (II) Module synaptics: vendor="X.Org Foundation"
[    47.184] 	compiled for 1.18.1, module version = 1.8.2
[    47.184] 	Module class: X.Org XInput Driver
[    47.184] 	ABI class: X.Org XInput driver, version 22.1
[    47.184] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    47.184] (**) ETPS/2 Elantech Touchpad: always reports core events
[    47.184] (**) Option "Device" "/dev/input/event9"
[    47.248] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    47.248] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3420 (res 31)
[    47.248] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2052 (res 31)
[    47.248] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    47.248] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    47.248] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    47.248] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    47.248] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    47.248] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    47.248] (**) ETPS/2 Elantech Touchpad: always reports core events
[    47.272] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event9"
[    47.272] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 16)
[    47.272] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    47.272] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    47.272] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.050
[    47.272] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    47.272] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    47.272] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    47.272] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    47.272] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    47.272] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    47.272] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"

Et le fichier de config xorg.conf :

Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "intel"
    Driver "modesetting"
    BusID "PCI:0@0:2:0"
    Option "AccelMethod" "None"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection

Je ne sais malheureusement pas les décrypter afin de connaître l'erreur...

Merci à ceux qui peuvent m'aider !

Hors ligne

#2 Le 26/11/2016, à 14:48

vmagnin

Re : Pilotes NVIDIA et Login Loop

Bonjour,

et si tu essaies d'installer un pilote propriétaire plus ancien ? nvidia-361 ou nvidia-352 ou nvidia-346 ?
Chaque nouvelle version corrige des bugs... et en apporte de nouveaux ! Donc revenir en arrière peut être bénéfique en attendant que le 367 soit débuggué.

Hors ligne

#3 Le 27/11/2016, à 22:22

thibault.le

Re : Pilotes NVIDIA et Login Loop

Bonjour,

Merci pour l'aide, j'avais essayé cette solution mais sans résultats...
J'ai finalement réinstallé Ubuntu....
Au moins ça marche maintenant !

Hors ligne