Pages : 1
#1 Le 03/11/2016, à 21:24
- Yann35
problème d'installation ?
Bonjour 
je viens de télécharger et installer ubuntu mate 16.10, et j'ai quelques petits problème :
je trouve la nouvelle installation plus lente que la 16.04 (mate aussi)
quand j'install un programme, il n'est pas rajouté au menu
quand je passe la souris au dessus d'un menu, je n'ai pas un "rectangle entourant le bouton survolé"
quand je démare virtualbox (en ligne de commande), une icône neutre s'affiche dans le dock du bas (en mode "cupertino") au lieu de l'icone de virtualbox.
je n'ai aucune proposition de driver pour ma CG alors que j'en ai en 16.04
l'installation m'a paru se passer sans erreur, et j'avoue ne pas savoir où chercher des informations 
voici mon lshw :
mate-16
description: Ordinateur de Bureau
produit: MS-7693 (To be filled by O.E.M.)
fabriquant: MSI
version: 3.0
numéro de série: To be filled by O.E.M.
bits: 64 bits
fonctionnalités: smbios-2.7 dmi-2.7 smp vsyscall32
configuration: boot=normal chassis=desktop family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00000000-0000-0000-0000-448A5BD09E47
*-core
description: Carte mère
produit: 970A-G43 (MS-7693)
fabriquant: MSI
identifiant matériel: 0
version: 3.0
numéro de série: To be filled by O.E.M.
emplacement: To be filled by O.E.M.
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: V10.6
date: 01/08/2016
taille: 64KiB
capacité: 8128KiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
*-cpu
description: CPU
produit: AMD FX-8320E Eight-Core Processor
fabriquant: Advanced Micro Devices [AMD]
identifiant matériel: 4
information bus: cpu@0
version: AMD FX-8320E Eight-Core Processor
numéro de série: To Be Filled By O.E.M.
emplacement: CPU 1
taille: 2300MHz
capacité: 3200MHz
bits: 64 bits
horloge: 200MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb hw_pstate vmmcall bmi1 arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold cpufreq
configuration: cores=8 enabledcores=8 threads=8
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1-Cache
taille: 384KiB
capacité: 384KiB
horloge: 1GHz (1.0ns)
fonctionnalités: pipeline-burst internal write-back unified
configuration: level=1
*-cache:1
description: L2 cache
identifiant matériel: 6
emplacement: L2-Cache
taille: 8MiB
capacité: 8MiB
horloge: 1GHz (1.0ns)
fonctionnalités: pipeline-burst internal write-back unified
configuration: level=2
*-cache:2
description: L3 cache
identifiant matériel: 7
emplacement: L3-Cache
taille: 8MiB
capacité: 8MiB
horloge: 1GHz (1.0ns)
fonctionnalités: pipeline-burst internal write-back unified
configuration: level=3
*-memory
description: Mémoire Système
identifiant matériel: 26
emplacement: Carte mère
taille: 16GiB
*-bank:0
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-10-10 00:20+0000X-Generator: Launchpad (build 18227) Synchrone [vide]
produit: Array1_PartNumber0
fabriquant: A1_Manufacturer0
identifiant matériel: 0
numéro de série: A1_SerNum0
emplacement: A1_DIMM0
*-bank:1
description: DIMM DDR3 Synchrone Unbuffered (Unregistered) 933 MHz (1,1 ns)
produit: F3-1866C8-8GTX
fabriquant: Undefined
identifiant matériel: 1
numéro de série: 00000000
emplacement: A1_DIMM1
taille: 8GiB
bits: 64 bits
horloge: 933MHz (1.1ns)
*-bank:2
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-10-10 00:20+0000X-Generator: Launchpad (build 18227) Synchrone [vide]
produit: Array1_PartNumber2
fabriquant: A1_Manufacturer2
identifiant matériel: 2
numéro de série: A1_SerNum2
emplacement: A1_DIMM2
*-bank:3
description: DIMM DDR3 Synchrone Unbuffered (Unregistered) 933 MHz (1,1 ns)
produit: F3-1866C8-8GTX
fabriquant: Undefined
identifiant matériel: 3
numéro de série: 00000000
emplacement: A1_DIMM3
taille: 8GiB
bits: 64 bits
horloge: 933MHz (1.1ns)
*-pci:0
description: Host bridge
produit: RD9x0/RX980 Host Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 02
bits: 32 bits
horloge: 33MHz
*-generic NON-RÉCLAMÉ
description: IOMMU
produit: RD890S/RD990 I/O Memory Management Unit (IOMMU)
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 0.2
information bus: pci@0000:00:00.2
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: msi ht cap_list
configuration: latency=0
*-pci:0
description: PCI bridge
produit: RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:28 portE/S:e000(taille=4096) mémoire:fea00000-feafffff portE/S:d0000000(taille=268435456)
*-display
description: VGA compatible controller
produit: Cape Verde PRO [Radeon HD 7750/8740 / R7 250E]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
ressources: irq:57 mémoire:d0000000-dfffffff mémoire:fea00000-fea3ffff portE/S:e000(taille=256) mémoire:c0000-dffff
*-multimedia
description: Audio device
produit: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:59 mémoire:fea60000-fea63fff
*-pci:1
description: PCI bridge
produit: RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4)
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 9
information bus: pci@0000:00:09.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:24 mémoire:fe900000-fe9fffff
*-usb
description: USB controller
produit: uPD720202 USB 3.0 Host Controller
fabriquant: Renesas Technology Corp.
identifiant matériel: 0
information bus: pci@0000:02:00.0
version: 02
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi msix pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:29 mémoire:fe900000-fe901fff
*-usbhost:0
produit: xHCI Host Controller
fabriquant: Linux 4.8.0-26-generic xhci-hcd
identifiant matériel: 0
information bus: usb@8
nom logique: usb8
version: 4.08
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabriquant: Linux 4.8.0-26-generic xhci-hcd
identifiant matériel: 1
information bus: usb@9
nom logique: usb9
version: 4.08
fonctionnalités: usb-3.00
configuration: driver=hub slots=2 speed=5000Mbit/s
*-pci:2
description: PCI bridge
produit: RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 5)
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: a
information bus: pci@0000:00:0a.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:25 mémoire:fe800000-fe8fffff
*-usb
description: USB controller
produit: uPD720202 USB 3.0 Host Controller
fabriquant: Renesas Technology Corp.
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 02
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi msix pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:38 mémoire:fe800000-fe801fff
*-usbhost:0
produit: xHCI Host Controller
fabriquant: Linux 4.8.0-26-generic xhci-hcd
identifiant matériel: 0
information bus: usb@10
nom logique: usb10
version: 4.08
fonctionnalités: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabriquant: Linux 4.8.0-26-generic xhci-hcd
identifiant matériel: 1
information bus: usb@11
nom logique: usb11
version: 4.08
fonctionnalités: usb-3.00
configuration: driver=hub slots=2 speed=5000Mbit/s
*-storage
description: SATA controller
produit: SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 11
information bus: pci@0000:00:11.0
version: 40
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=32
ressources: irq:19 portE/S:f090(taille=8) portE/S:f080(taille=4) portE/S:f070(taille=8) portE/S:f060(taille=4) portE/S:f050(taille=16) mémoire:feb0b000-feb0b3ff
*-usb:0
description: USB controller
produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 12
information bus: pci@0000:00:12.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:feb0a000-feb0afff
*-usbhost
produit: OHCI PCI host controller
fabriquant: Linux 4.8.0-26-generic ohci_hcd
identifiant matériel: 1
information bus: usb@4
nom logique: usb4
version: 4.08
fonctionnalités: usb-1.10
configuration: driver=hub slots=5 speed=12Mbit/s
*-usb:1
description: USB controller
produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 12.2
information bus: pci@0000:00:12.2
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:feb09000-feb090ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.8.0-26-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 4.08
fonctionnalités: usb-2.00
configuration: driver=hub slots=5 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: USB2.0 Hub Controller
fabriquant: NEC Corporation
identifiant matériel: 5
information bus: usb@1:5
version: 1.00
fonctionnalités: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:0
description: Clavier
produit: USB Receiver
fabriquant: Logitech
identifiant matériel: 1
information bus: usb@1:5.1
version: 12.03
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=12Mbit/s
*-usb:1
description: Clavier
produit: USB Receiver
fabriquant: Logitech
identifiant matériel: 2
information bus: usb@1:5.2
version: 12.03
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=12Mbit/s
*-usb:2
description: USB controller
produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 13
information bus: pci@0000:00:13.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:feb08000-feb08fff
*-usbhost
produit: OHCI PCI host controller
fabriquant: Linux 4.8.0-26-generic ohci_hcd
identifiant matériel: 1
information bus: usb@5
nom logique: usb5
version: 4.08
fonctionnalités: usb-1.10
configuration: driver=hub slots=5 speed=12Mbit/s
*-usb:3
description: USB controller
produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 13.2
information bus: pci@0000:00:13.2
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:feb07000-feb070ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.8.0-26-generic ehci_hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.08
fonctionnalités: usb-2.00
configuration: driver=hub slots=5 speed=480Mbit/s
*-serial
description: SMBus
produit: SBx00 SMBus Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 42
bits: 32 bits
horloge: 66MHz
configuration: driver=piix4_smbus latency=0
ressources: irq:0
*-ide
description: IDE interface
produit: SB7x0/SB8x0/SB9x0 IDE Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.1
information bus: pci@0000:00:14.1
version: 40
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide bus_master
configuration: driver=pata_atiixp latency=32
ressources: irq:17 portE/S:1f0(taille=8) portE/S:3f6 portE/S:170(taille=8) portE/S:376 portE/S:f000(taille=16)
*-multimedia
description: Audio device
produit: SBx00 Azalia (Intel HDA)
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 40
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=snd_hda_intel latency=32
ressources: irq:16 mémoire:feb00000-feb03fff
*-isa
description: ISA bridge
produit: SB7x0/SB8x0/SB9x0 LPC host controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.3
information bus: pci@0000:00:14.3
version: 40
bits: 32 bits
horloge: 66MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-pci:3
description: PCI bridge
produit: SBx00 PCI to PCI Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.4
information bus: pci@0000:00:14.4
version: 40
bits: 32 bits
horloge: 66MHz
fonctionnalités: pci subtractive_decode bus_master vga_palette
*-usb:4
description: USB controller
produit: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 14.5
information bus: pci@0000:00:14.5
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:feb06000-feb06fff
*-usbhost
produit: OHCI PCI host controller
fabriquant: Linux 4.8.0-26-generic ohci_hcd
identifiant matériel: 1
information bus: usb@6
nom logique: usb6
version: 4.08
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-pci:4
description: PCI bridge
produit: SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 15
information bus: pci@0000:00:15.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:d000(taille=4096) mémoire:fe700000-fe7fffff
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:05:00.0
nom logique: enp5s0
version: 06
numéro de série: 44:8a:5b:d0:9e:47
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.82 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
ressources: irq:55 portE/S:d000(taille=256) mémoire:fe704000-fe704fff mémoire:fe700000-fe703fff
*-pci:5
description: PCI bridge
produit: SB900 PCI to PCI bridge (PCIE port 3)
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 15.3
information bus: pci@0000:00:15.3
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 mémoire:fe600000-fe6fffff
*-usb
description: USB controller
produit: uPD720201 USB 3.0 Host Controller
fabriquant: Renesas Technology Corp.
identifiant matériel: 0
information bus: pci@0000:06:00.0
version: 03
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi msix pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:19 mémoire:fe600000-fe601fff
*-usbhost:0
produit: xHCI Host Controller
fabriquant: Linux 4.8.0-26-generic xhci-hcd
identifiant matériel: 0
information bus: usb@12
nom logique: usb12
version: 4.08
fonctionnalités: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabriquant: Linux 4.8.0-26-generic xhci-hcd
identifiant matériel: 1
information bus: usb@13
nom logique: usb13
version: 4.08
fonctionnalités: usb-3.00
configuration: driver=hub slots=4 speed=5000Mbit/s
*-usb:5
description: USB controller
produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:feb05000-feb05fff
*-usbhost
produit: OHCI PCI host controller
fabriquant: Linux 4.8.0-26-generic ohci_hcd
identifiant matériel: 1
information bus: usb@7
nom logique: usb7
version: 4.08
fonctionnalités: usb-1.10
configuration: driver=hub slots=4 speed=12Mbit/s
*-usb:6
description: USB controller
produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 16.2
information bus: pci@0000:00:16.2
version: 00
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:feb04000-feb040ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.8.0-26-generic ehci_hcd
identifiant matériel: 1
information bus: usb@3
nom logique: usb3
version: 4.08
fonctionnalités: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb:0
description: Périphérique de stockage de masse
produit: USB Storage
fabriquant: Genesys Logic, Inc.
identifiant matériel: 1
information bus: usb@3:1
nom logique: scsi6
version: 0.16
numéro de série: 000000000033
fonctionnalités: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=96mA speed=480Mbit/s
*-disk
description: SCSI Disk
produit: SV300S37A60G
fabriquant: KINGSTON
identifiant matériel: 0.0.0
information bus: scsi@6:0.0.0
nom logique: /dev/sdd
version: 0016
numéro de série: 50026B7237010A5B
taille: 55GiB (60GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=4 logicalsectorsize=512 sectorsize=512 signature=91882a09
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@6:0.0.0,1
nom logique: /dev/sdd1
nom logique: /boot
version: 1.0
numéro de série: 918a5e68-6137-4492-9f98-8db59fe84365
taille: 1952MiB
capacité: 1952MiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration: created=2016-11-03 07:58:09 filesystem=ext4 lastmountpoint=/boot modified=2016-11-03 08:42:42 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2016-11-03 08:30:51 state=mounted
*-volume:1
description: Linux filesystem partition
identifiant matériel: 2
information bus: scsi@6:0.0.0,2
nom logique: /dev/sdd2
numéro de série: 379f695b-eae4-4429-8a00-feb816361f6b
taille: 53GiB
capacité: 53GiB
bits: 512 bits
fonctionnalités: primary encrypted luks initialized
configuration: bits=512 cipher=aes filesystem=luks hash=sha256 mode=xts-plain64 version=1
*-usb:1
description: Périphérique de stockage de masse
produit: Flash Card Reader/Writer
fabriquant: Generic
identifiant matériel: 3
information bus: usb@3:3
nom logique: scsi7
version: 1.00
numéro de série: 058F63856479
fonctionnalités: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=250mA speed=480Mbit/s
*-disk:0
description: SCSI Disk
produit: 2.0 Reader -0
fabriquant: Generic
identifiant matériel: 0.0.0
information bus: scsi@7:0.0.0
nom logique: /dev/sda
version: 1.34
numéro de série: AU6479
fonctionnalités: removable
configuration: ansiversion=4 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sda
*-disk:1
description: SCSI Disk
produit: 2.0 Reader -1
fabriquant: Generic
identifiant matériel: 0.0.1
information bus: scsi@7:0.0.1
nom logique: /dev/sdb
version: 1.32
numéro de série: AU6479
fonctionnalités: removable
configuration: ansiversion=4 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdb
*-disk:2
description: SCSI Disk
produit: 2.0 Reader -2
fabriquant: Generic
identifiant matériel: 0.0.2
information bus: scsi@7:0.0.2
nom logique: /dev/sdc
version: 1.03
numéro de série: AU6479
fonctionnalités: removable
configuration: ansiversion=4 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdc
*-pci:1
description: Host bridge
produit: Family 15h Processor Function 0
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 101
information bus: pci@0000:00:18.0
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:2
description: Host bridge
produit: Family 15h Processor Function 1
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 102
information bus: pci@0000:00:18.1
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:3
description: Host bridge
produit: Family 15h Processor Function 2
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 103
information bus: pci@0000:00:18.2
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:4
description: Host bridge
produit: Family 15h Processor Function 3
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 104
information bus: pci@0000:00:18.3
version: 00
bits: 32 bits
horloge: 33MHz
configuration: driver=k10temp
ressources: irq:0
*-pci:5
description: Host bridge
produit: Family 15h Processor Function 4
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 105
information bus: pci@0000:00:18.4
version: 00
bits: 32 bits
horloge: 33MHz
configuration: driver=fam15h_power
ressources: irq:0
*-pci:6
description: Host bridge
produit: Family 15h Processor Function 5
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 106
information bus: pci@0000:00:18.5
version: 00
bits: 32 bits
horloge: 33MHz
*-scsi
identifiant matériel: 1
nom logique: scsi2
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: WDC WD15EADS-00P
fabriquant: Western Digital
identifiant matériel: 0.0.0
information bus: scsi@2:0.0.0
nom logique: /dev/sde
version: 0A01
numéro de série: WD-WMAVU0387037
taille: 1397GiB (1500GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=000840ff
*-volume
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@2:0.0.0,1
nom logique: /dev/sde1
nom logique: /media/jean-luc/DATA_JLD_BIG_1.5
version: 3.1
numéro de série: 02a7-94bb
taille: 1397GiB
capacité: 1397GiB
fonctionnalités: primary ntfs initialized
configuration: clustersize=4096 created=2015-08-28 13:44:33 filesystem=ntfs label=DATA_JLD_BIG_1.5 mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mountedvoici mon dmesg :
[ 0.000000] Linux version 4.8.0-26-generic (buildd@lgw01-58) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #28-Ubuntu SMP Tue Oct 18 14:39:52 UTC 2016 (Ubuntu 4.8.0-26.28-generic 4.8.0)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.8.0-26-generic root=UUID=2ee577dd-aceb-4137-bf49-37999f7619f1 ro rootflags=subvol=@ quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cd832fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd833000-0x00000000cdb2dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdb2e000-0x00000000cde7bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cde7c000-0x00000000cea3efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cea3f000-0x00000000cea3ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cea40000-0x00000000cec45fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cec46000-0x00000000cf06dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf06e000-0x00000000cf7eefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ef000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000042effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7693/970A-G43 (MS-7693), BIOS V10.6 01/08/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CF800000 mask FFFFFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000042f000000 aka 17136M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 3320M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff99efc00fd8b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff99efc0099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x106251000, 0x106251fff] PGTABLE
[ 0.000000] BRK [0x106252000, 0x106252fff] PGTABLE
[ 0.000000] BRK [0x106253000, 0x106253fff] PGTABLE
[ 0.000000] BRK [0x106254000, 0x106254fff] PGTABLE
[ 0.000000] BRK [0x106255000, 0x106255fff] PGTABLE
[ 0.000000] BRK [0x106256000, 0x106256fff] PGTABLE
[ 0.000000] BRK [0x106257000, 0x106257fff] PGTABLE
[ 0.000000] BRK [0x106258000, 0x106258fff] PGTABLE
[ 0.000000] BRK [0x106259000, 0x106259fff] PGTABLE
[ 0.000000] BRK [0x10625a000, 0x10625afff] PGTABLE
[ 0.000000] BRK [0x10625b000, 0x10625bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x32ec2000-0x35758fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CDE6C070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CDE724E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000CDE6C160 006384 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CDE75080 000040
[ 0.000000] ACPI: APIC 0x00000000CDE725F8 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CDE72698 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CDE726E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000CDE72720 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CDE72758 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 0x00000000CDE73E70 0000D8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42eff9000-0x42effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cd832fff]
[ 0.000000] node 0: [mem 0x00000000cea3f000-0x00000000cea3ffff]
[ 0.000000] node 0: [mem 0x00000000cec46000-0x00000000cf06dfff]
[ 0.000000] node 0: [mem 0x00000000cf7ef000-0x00000000cf7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000042effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
[ 0.000000] On node 0 totalpages: 4181002
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13106 pages used for memmap
[ 0.000000] DMA32 zone: 838765 pages, LIFO batch:31
[ 0.000000] Normal zone: 52160 pages used for memmap
[ 0.000000] Normal zone: 3338239 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd833000-0xcdb2dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdb2e000-0xcde7bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcde7c000-0xcea3efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea40000-0xcec45fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf06e000-0xcf7eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xcf800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff99f3eec00000 s107544 r8192 d31720 u262144
[ 0.000000] pcpu-alloc: s107544 r8192 d31720 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115651
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-26-generic root=UUID=2ee577dd-aceb-4137-bf49-37999f7619f1 ro rootflags=subvol=@ quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 16268392K/16724008K available (8847K kernel code, 1427K rwdata, 3804K rodata, 1548K init, 1400K bss, 455616K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:1032 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3199.872 MHz processor
[ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.74 BogoMIPS (lpj=12799488)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20160422
[ 0.003120] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.003148] Security Framework initialized
[ 0.003149] Yama: becoming mindful.
[ 0.003162] AppArmor: AppArmor initialized
[ 0.004047] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007717] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009353] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009368] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009685] CPU: Physical Processor ID: 0
[ 0.009685] CPU: Processor Core ID: 0
[ 0.009686] mce: CPU supports 7 MCE banks
[ 0.009692] LVT offset 1 assigned for vector 0xf9
[ 0.009697] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.009698] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.009961] Freeing SMP alternatives memory: 32K (ffffffffa76e9000 - ffffffffa76f1000)
[ 0.035382] ftrace: allocating 33403 entries in 131 pages
[ 0.047544] smpboot: APIC(10) Converting physical 1 to logical package 0
[ 0.047545] smpboot: Max logical packages: 2
[ 0.126124] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.271689] smpboot: CPU0: AMD FX-8320E Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.271692] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.271695] ... version: 0
[ 0.271696] ... bit width: 48
[ 0.271696] ... generic registers: 6
[ 0.271697] ... value mask: 0000ffffffffffff
[ 0.271697] ... max period: 00007fffffffffff
[ 0.271698] ... fixed-purpose events: 0
[ 0.271698] ... event mask: 000000000000003f
[ 0.272405] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.272491] x86: Booting SMP configuration:
[ 0.272492] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.292589] x86: Booted up 1 node, 8 CPUs
[ 0.292591] smpboot: Total of 8 processors activated (51197.95 BogoMIPS)
[ 0.305200] devtmpfs: initialized
[ 0.305267] x86/mm: Memory block size: 128MB
[ 0.309142] evm: security.selinux
[ 0.309142] evm: security.SMACK64
[ 0.309143] evm: security.SMACK64EXEC
[ 0.309143] evm: security.SMACK64TRANSMUTE
[ 0.309144] evm: security.SMACK64MMAP
[ 0.309144] evm: security.ima
[ 0.309144] evm: security.capability
[ 0.309226] PM: Registering ACPI NVS region [mem 0xcdb2e000-0xcde7bfff] (3465216 bytes)
[ 0.309273] PM: Registering ACPI NVS region [mem 0xcea40000-0xcec45fff] (2121728 bytes)
[ 0.309364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.309409] pinctrl core: initialized pinctrl subsystem
[ 0.309506] RTC time: 7:49:35, date: 11/03/16
[ 0.309592] NET: Registered protocol family 16
[ 0.327695] cpuidle: using governor ladder
[ 0.343694] cpuidle: using governor menu
[ 0.343695] PCCT header not found.
[ 0.343768] ACPI: bus type PCI registered
[ 0.343769] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.343829] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.343831] PCI: not using MMCONFIG
[ 0.343831] PCI: Using configuration type 1 for base access
[ 0.343832] PCI: Using configuration type 1 for extended access
[ 0.359835] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.359836] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.360130] ACPI: Added _OSI(Module Device)
[ 0.360130] ACPI: Added _OSI(Processor Device)
[ 0.360131] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.360132] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.360287] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.363519] ACPI: Interpreter enabled
[ 0.363533] ACPI: (supports S0 S3 S4 S5)
[ 0.363534] ACPI: Using IOAPIC for interrupt routing
[ 0.363660] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.363704] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.363713] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.368989] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.368992] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.368996] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.369280] PCI host bridge to bus 0000:00
[ 0.369281] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.369283] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.369284] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.369285] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.369286] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.369287] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.369288] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[ 0.369289] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.369299] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.369404] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.369505] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.369537] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.369581] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.369623] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.369654] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.369696] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.369733] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.369763] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.369806] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.369851] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.369864] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.369871] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.369877] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.369884] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.369891] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.369898] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[ 0.369914] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.370003] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.370013] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[ 0.370094] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.370135] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.370147] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[ 0.370236] pci 0000:00:12.2: supports D1 D2
[ 0.370237] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.370278] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.370319] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.370329] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[ 0.370409] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.370449] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.370461] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[ 0.370521] pci 0000:00:13.2: supports D1 D2
[ 0.370522] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.370563] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.370602] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.370719] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.370729] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.370735] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.370742] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.370749] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.370756] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.370771] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.370772] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.370773] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.370774] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.370849] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.370864] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.370914] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.370955] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.370990] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.371108] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.371174] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.371212] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.371222] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[ 0.371303] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.371343] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.371397] pci 0000:00:15.0: supports D1 D2
[ 0.371440] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.371482] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[ 0.371534] pci 0000:00:15.3: supports D1 D2
[ 0.371577] pci 0000:00:15.3: System wakeup disabled by ACPI
[ 0.371618] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.371628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[ 0.371712] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.371751] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.371764] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[ 0.371823] pci 0000:00:16.2: supports D1 D2
[ 0.371824] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.371866] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.371905] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.371980] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.372051] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.372123] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.372198] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.372268] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.372383] pci 0000:01:00.0: [1002:683f] type 00 class 0x030000
[ 0.372394] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.372402] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
[ 0.372407] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.372417] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[ 0.372452] pci 0000:01:00.0: supports D1 D2
[ 0.372453] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.372511] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.372522] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[ 0.372574] pci 0000:01:00.1: supports D1 D2
[ 0.383701] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.383704] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.383706] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.383708] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.383755] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.383772] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
[ 0.383853] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.395701] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.395705] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.395752] pci 0000:03:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.395769] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe801fff 64bit]
[ 0.395879] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.407701] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.407704] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.407771] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.407777] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.407778] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.407780] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.407781] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.407782] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.407783] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.407784] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[ 0.407839] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.407857] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.407881] pci 0000:05:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit pref]
[ 0.407896] pci 0000:05:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit pref]
[ 0.407978] pci 0000:05:00.0: supports D1 D2
[ 0.407979] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.419703] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 0.419707] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.419710] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.419778] pci 0000:06:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.419809] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe601fff 64bit]
[ 0.419963] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.431706] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.431711] pci 0000:00:15.3: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.432118] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.432175] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.432233] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.432292] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[ 0.432339] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.432376] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.432414] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.432477] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.432823] SCSI subsystem initialized
[ 0.432865] libata version 3.00 loaded.
[ 0.432905] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.432906] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.432907] vgaarb: loaded
[ 0.432907] vgaarb: bridge control possible 0000:01:00.0
[ 0.432927] ACPI: bus type USB registered
[ 0.432944] usbcore: registered new interface driver usbfs
[ 0.432953] usbcore: registered new interface driver hub
[ 0.432977] usbcore: registered new device driver usb
[ 0.433104] PCI: Using ACPI for IRQ routing
[ 0.439500] PCI: pci_cache_line_size set to 64 bytes
[ 0.439556] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.439557] e820: reserve RAM buffer [mem 0xcd833000-0xcfffffff]
[ 0.439558] e820: reserve RAM buffer [mem 0xcea40000-0xcfffffff]
[ 0.439559] e820: reserve RAM buffer [mem 0xcf06e000-0xcfffffff]
[ 0.439559] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.439560] e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
[ 0.439651] NetLabel: Initializing
[ 0.439652] NetLabel: domain hash size = 128
[ 0.439652] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.439663] NetLabel: unlabeled traffic allowed by default
[ 0.439797] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.439800] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.441850] clocksource: Switched to clocksource hpet
[ 0.449962] VFS: Disk quotas dquot_6.6.0
[ 0.449976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.450064] AppArmor: AppArmor Filesystem Enabled
[ 0.450107] pnp: PnP ACPI init
[ 0.450211] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.450214] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.450465] system 00:01: [io 0x040b] has been reserved
[ 0.450466] system 00:01: [io 0x04d6] has been reserved
[ 0.450468] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.450469] system 00:01: [io 0x0c14] has been reserved
[ 0.450470] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.450471] system 00:01: [io 0x0c52] has been reserved
[ 0.450472] system 00:01: [io 0x0c6c] has been reserved
[ 0.450474] system 00:01: [io 0x0c6f] has been reserved
[ 0.450475] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.450476] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.450477] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.450478] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.450479] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.450481] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.450482] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.450483] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.450484] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.450486] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.450488] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.450489] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.450491] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.450492] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.450493] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.450495] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.450496] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 0.450498] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450618] system 00:02: [io 0x0480-0x0481] has been reserved
[ 0.450620] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450815] pnp 00:03: [dma 0 disabled]
[ 0.450854] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.450880] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.450939] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.450941] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450983] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.451124] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.451126] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.451230] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.451232] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.451324] pnp: PnP ACPI: found 9 devices
[ 0.457996] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.458023] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.458024] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.458027] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.458029] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.458031] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.458033] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.458037] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.458039] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.458042] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.458050] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 0.458052] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.458055] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.458060] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.458063] pci 0000:00:15.3: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.458068] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.458070] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.458071] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.458072] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.458073] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.458074] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.458075] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
[ 0.458076] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.458077] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.458079] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.458080] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.458081] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.458082] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 0.458083] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.458084] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 0.458085] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 0.458086] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.458087] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.458088] pci_bus 0000:04: resource 10 [mem 0xd0000000-0xffffffff window]
[ 0.458089] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.458090] pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.458091] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.458117] NET: Registered protocol family 2
[ 0.458303] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.458545] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.458731] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.458766] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.458823] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.458907] NET: Registered protocol family 1
[ 0.810057] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.810384] PCI: CLS 64 bytes, default 64
[ 0.810424] Trying to unpack rootfs image as initramfs...
[ 1.383779] Freeing initrd memory: 41564K (ffff99eff2ec2000 - ffff99eff5759000)
[ 1.384233] iommu: Adding device 0000:00:00.0 to group 0
[ 1.384297] iommu: Adding device 0000:00:02.0 to group 1
[ 1.384360] iommu: Adding device 0000:00:09.0 to group 2
[ 1.384423] iommu: Adding device 0000:00:0a.0 to group 3
[ 1.384506] iommu: Adding device 0000:00:11.0 to group 4
[ 1.384579] iommu: Adding device 0000:00:12.0 to group 5
[ 1.384594] iommu: Adding device 0000:00:12.2 to group 5
[ 1.384669] iommu: Adding device 0000:00:13.0 to group 6
[ 1.384682] iommu: Adding device 0000:00:13.2 to group 6
[ 1.384748] iommu: Adding device 0000:00:14.0 to group 7
[ 1.384813] iommu: Adding device 0000:00:14.1 to group 8
[ 1.384877] iommu: Adding device 0000:00:14.2 to group 9
[ 1.384944] iommu: Adding device 0000:00:14.3 to group 10
[ 1.385008] iommu: Adding device 0000:00:14.4 to group 11
[ 1.385077] iommu: Adding device 0000:00:14.5 to group 12
[ 1.385155] iommu: Adding device 0000:00:15.0 to group 13
[ 1.385172] iommu: Adding device 0000:00:15.3 to group 13
[ 1.385250] iommu: Adding device 0000:00:16.0 to group 14
[ 1.385265] iommu: Adding device 0000:00:16.2 to group 14
[ 1.385368] iommu: Adding device 0000:01:00.0 to group 15
[ 1.385390] iommu: Adding device 0000:01:00.1 to group 15
[ 1.385460] iommu: Adding device 0000:02:00.0 to group 16
[ 1.385530] iommu: Adding device 0000:03:00.0 to group 17
[ 1.385542] iommu: Adding device 0000:05:00.0 to group 13
[ 1.385553] iommu: Adding device 0000:06:00.0 to group 13
[ 1.463805] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.463805] AMD-Vi: Interrupt remapping enabled
[ 1.463911] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.465491] perf: AMD NB counters detected
[ 1.465667] LVT offset 0 assigned for vector 0x400
[ 1.465744] perf: AMD IBS detected (0x000000ff)
[ 1.465782] Scanning for low memory corruption every 60 seconds
[ 1.466165] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.466196] audit: initializing netlink subsys (disabled)
[ 1.466210] audit: type=2000 audit(1478159376.252:1): initialized
[ 1.466533] Initialise system trusted keyrings
[ 1.466649] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.468513] zbud: loaded
[ 1.468952] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.469190] fuse init (API version 7.25)
[ 1.469327] Key type big_key registered
[ 1.469334] Allocating IMA blacklist keyring.
[ 1.470692] Key type asymmetric registered
[ 1.470693] Asymmetric key parser 'x509' registered
[ 1.470726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.470771] io scheduler noop registered
[ 1.470772] io scheduler deadline registered (default)
[ 1.470778] io scheduler cfq registered
[ 1.471085] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.471090] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.471122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 1.471122] vesafb: scrolling: redraw
[ 1.471124] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.471133] vesafb: framebuffer at 0xd0000000, mapped to 0xffffbaef82000000, using 8128k, total 8128k
[ 1.471254] Console: switching to colour frame buffer device 240x67
[ 1.471282] fb0: VESA VGA frame buffer device
[ 1.471360] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.471363] ACPI: Power Button [PWRB]
[ 1.471401] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.471402] ACPI: Power Button [PWRF]
[ 1.472231] GHES: HEST is not enabled!
[ 1.472307] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.492757] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.494377] Linux agpgart interface v0.103
[ 1.497848] brd: module loaded
[ 1.499306] loop: module loaded
[ 1.499501] libphy: Fixed MDIO Bus: probed
[ 1.499501] tun: Universal TUN/TAP device driver, 1.6
[ 1.499502] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.499537] PPP generic driver version 2.4.2
[ 1.499576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.499578] ehci-pci: EHCI PCI platform driver
[ 1.499658] QUIRK: Enable AMD PLL fix
[ 1.499675] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.499679] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.499682] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.499689] ehci-pci 0000:00:12.2: debug port 1
[ 1.499727] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.513987] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.514092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.514093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.514095] usb usb1: Product: EHCI Host Controller
[ 1.514095] usb usb1: Manufacturer: Linux 4.8.0-26-generic ehci_hcd
[ 1.514096] usb usb1: SerialNumber: 0000:00:12.2
[ 1.514202] hub 1-0:1.0: USB hub found
[ 1.514207] hub 1-0:1.0: 5 ports detected
[ 1.514406] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.514410] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.514412] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.514419] ehci-pci 0000:00:13.2: debug port 1
[ 1.514446] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[ 1.529990] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.530079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.530090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.530091] usb usb2: Product: EHCI Host Controller
[ 1.530092] usb usb2: Manufacturer: Linux 4.8.0-26-generic ehci_hcd
[ 1.530093] usb usb2: SerialNumber: 0000:00:13.2
[ 1.530195] hub 2-0:1.0: USB hub found
[ 1.530200] hub 2-0:1.0: 5 ports detected
[ 1.530395] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.530399] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.530401] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.530408] ehci-pci 0000:00:16.2: debug port 1
[ 1.530434] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[ 1.545996] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.546093] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.546095] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.546096] usb usb3: Product: EHCI Host Controller
[ 1.546097] usb usb3: Manufacturer: Linux 4.8.0-26-generic ehci_hcd
[ 1.546098] usb usb3: SerialNumber: 0000:00:16.2
[ 1.546202] hub 3-0:1.0: USB hub found
[ 1.546207] hub 3-0:1.0: 4 ports detected
[ 1.546320] ehci-platform: EHCI generic platform driver
[ 1.546329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.546330] ohci-pci: OHCI PCI platform driver
[ 1.546408] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.546412] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.546436] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.610029] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.610031] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.610032] usb usb4: Product: OHCI PCI host controller
[ 1.610033] usb usb4: Manufacturer: Linux 4.8.0-26-generic ohci_hcd
[ 1.610034] usb usb4: SerialNumber: 0000:00:12.0
[ 1.610144] hub 4-0:1.0: USB hub found
[ 1.610151] hub 4-0:1.0: 5 ports detected
[ 1.610371] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.610374] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.610391] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[ 1.673999] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.674000] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.674001] usb usb5: Product: OHCI PCI host controller
[ 1.674002] usb usb5: Manufacturer: Linux 4.8.0-26-generic ohci_hcd
[ 1.674003] usb usb5: SerialNumber: 0000:00:13.0
[ 1.674208] hub 5-0:1.0: USB hub found
[ 1.674214] hub 5-0:1.0: 5 ports detected
[ 1.674408] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.674412] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.674429] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.737995] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.737997] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.737998] usb usb6: Product: OHCI PCI host controller
[ 1.737999] usb usb6: Manufacturer: Linux 4.8.0-26-generic ohci_hcd
[ 1.738000] usb usb6: SerialNumber: 0000:00:14.5
[ 1.738190] hub 6-0:1.0: USB hub found
[ 1.738196] hub 6-0:1.0: 2 ports detected
[ 1.738350] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.738353] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.738375] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[ 1.802001] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.802003] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.802004] usb usb7: Product: OHCI PCI host controller
[ 1.802004] usb usb7: Manufacturer: Linux 4.8.0-26-generic ohci_hcd
[ 1.802005] usb usb7: SerialNumber: 0000:00:16.0
[ 1.802196] hub 7-0:1.0: USB hub found
[ 1.802203] hub 7-0:1.0: 4 ports detected
[ 1.802322] ohci-platform: OHCI generic platform driver
[ 1.802331] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.802406] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.802410] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 1.807653] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 1.807839] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.807840] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.807841] usb usb8: Product: xHCI Host Controller
[ 1.807842] usb usb8: Manufacturer: Linux 4.8.0-26-generic xhci-hcd
[ 1.807842] usb usb8: SerialNumber: 0000:02:00.0
[ 1.808029] hub 8-0:1.0: USB hub found
[ 1.808041] hub 8-0:1.0: 2 ports detected
[ 1.808129] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.808131] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 1.811197] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.811216] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.811217] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.811218] usb usb9: Product: xHCI Host Controller
[ 1.811219] usb usb9: Manufacturer: Linux 4.8.0-26-generic xhci-hcd
[ 1.811220] usb usb9: SerialNumber: 0000:02:00.0
[ 1.811399] hub 9-0:1.0: USB hub found
[ 1.811405] hub 9-0:1.0: 2 ports detected
[ 1.811527] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.811532] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
[ 1.816768] xhci_hcd 0000:03:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 1.816943] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.816945] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.816945] usb usb10: Product: xHCI Host Controller
[ 1.816946] usb usb10: Manufacturer: Linux 4.8.0-26-generic xhci-hcd
[ 1.816947] usb usb10: SerialNumber: 0000:03:00.0
[ 1.817128] hub 10-0:1.0: USB hub found
[ 1.817134] hub 10-0:1.0: 2 ports detected
[ 1.817215] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.817217] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 11
[ 1.820312] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.820327] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.820328] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.820328] usb usb11: Product: xHCI Host Controller
[ 1.820329] usb usb11: Manufacturer: Linux 4.8.0-26-generic xhci-hcd
[ 1.820330] usb usb11: SerialNumber: 0000:03:00.0
[ 1.820508] hub 11-0:1.0: USB hub found
[ 1.820515] hub 11-0:1.0: 2 ports detected
[ 1.820641] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.820644] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 12
[ 1.826047] xhci_hcd 0000:06:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000010
[ 1.826258] usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.826259] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.826260] usb usb12: Product: xHCI Host Controller
[ 1.826261] usb usb12: Manufacturer: Linux 4.8.0-26-generic xhci-hcd
[ 1.826262] usb usb12: SerialNumber: 0000:06:00.0
[ 1.826384] hub 12-0:1.0: USB hub found
[ 1.826392] hub 12-0:1.0: 4 ports detected
[ 1.826511] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.826513] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 13
[ 1.829598] usb usb13: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.829612] usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.829613] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.829614] usb usb13: Product: xHCI Host Controller
[ 1.829615] usb usb13: Manufacturer: Linux 4.8.0-26-generic xhci-hcd
[ 1.829616] usb usb13: SerialNumber: 0000:06:00.0
[ 1.829796] hub 13-0:1.0: USB hub found
[ 1.829807] hub 13-0:1.0: 4 ports detected
[ 1.829971] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.830331] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.830334] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.830473] mousedev: PS/2 mouse device common for all mice
[ 1.830597] rtc_cmos 00:04: RTC can wake from S4
[ 1.830693] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.830716] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.830720] i2c /dev entries driver
[ 1.830767] device-mapper: uevent: version 1.0.3
[ 1.830833] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.830996] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.831318] NET: Registered protocol family 10
[ 1.831532] NET: Registered protocol family 17
[ 1.831537] Key type dns_resolver registered
[ 1.832062] microcode: CPU0: patch_level=0x06000822
[ 1.832069] microcode: CPU1: patch_level=0x06000822
[ 1.832075] microcode: CPU2: patch_level=0x06000822
[ 1.832081] microcode: CPU3: patch_level=0x06000822
[ 1.832090] microcode: CPU4: patch_level=0x06000822
[ 1.832096] microcode: CPU5: patch_level=0x06000822
[ 1.832103] microcode: CPU6: patch_level=0x06000822
[ 1.832107] microcode: CPU7: patch_level=0x06000822
[ 1.832139] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.832258] registered taskstats version 1
[ 1.832260] Loading compiled-in X.509 certificates
[ 1.834762] Loaded X.509 cert 'Build time autogenerated kernel key: 348cee62a2e1010eb5bceea403a0849e07cb2b31'
[ 1.834779] zswap: loaded using pool lzo/zbud
[ 1.841947] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 1.847330] Key type trusted registered
[ 1.849129] Key type encrypted registered
[ 1.849132] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.849134] ima: No TPM chip found, activating TPM-bypass!
[ 1.849155] evm: HMAC attrs: 0x1
[ 1.849461] Magic number: 8:782:823
[ 1.849577] rtc_cmos 00:04: setting system clock to 2016-11-03 07:49:37 UTC (1478159377)
[ 1.849716] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.850050] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.850051] EDD information not available.
[ 1.850120] PM: Hibernation image not present or could not be loaded.
[ 1.851343] Freeing unused kernel memory: 1548K (ffffffffa7566000 - ffffffffa76e9000)
[ 1.851343] Write protecting the kernel read-only data: 14336k
[ 1.851855] Freeing unused kernel memory: 1376K (ffff99f0c58a8000 - ffff99f0c5a00000)
[ 1.852455] Freeing unused kernel memory: 292K (ffff99f0c5db7000 - ffff99f0c5e00000)
[ 1.859507] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.869588] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.869656] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.869664] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.870397] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.870427] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.871345] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.871388] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.871709] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.871759] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.871803] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.874004] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.901349] wmi: Mapper loaded
[ 1.902484] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.910970] scsi host0: pata_atiixp
[ 1.911159] scsi host1: pata_atiixp
[ 1.911207] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.911208] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.911234] ahci 0000:00:11.0: version 3.0
[ 1.911438] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.911441] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.912184] scsi host2: ahci
[ 1.912214] [drm] Initialized drm 1.1.0 20060810
[ 1.912318] scsi host3: ahci
[ 1.912436] scsi host4: ahci
[ 1.912572] scsi host5: ahci
[ 1.912640] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[ 1.912642] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[ 1.912644] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[ 1.912646] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[ 1.913300] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.913307] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.913834] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffbaef81b9e000, 44:8a:5b:d0:9e:47, XID 0c900800 IRQ 55
[ 1.913836] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.927756] AVX version of gcm_enc/dec engaged.
[ 1.927756] AES CTR mode by8 optimization enabled
[ 1.944322] [drm] radeon kernel modesetting enabled.
[ 1.946435] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.946436] AMD IOMMUv2 functionality not available on this system
[ 1.949573] CRAT table not found
[ 1.949574] Finished initializing topology ret=0
[ 1.949624] kfd kfd: Initialized module
[ 1.949780] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 1.949781] fb: switching to radeondrmfb from VESA VGA
[ 1.949808] Console: switching to colour dummy device 80x25
[ 1.950173] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x174B:0xA001 0x00).
[ 1.950183] [drm] register mmio base: 0xFEA00000
[ 1.950184] [drm] register mmio size: 262144
[ 1.950237] ATOM BIOS: C44501
[ 1.950377] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 1.950378] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 1.950380] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 1.950380] [drm] RAM width 128bits DDR
[ 1.950425] [TTM] Zone kernel: Available graphics memory: 8189578 kiB
[ 1.950426] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.950426] [TTM] Initializing pool allocator
[ 1.950431] [TTM] Initializing DMA pool allocator
[ 1.950450] [drm] radeon: 1024M of VRAM memory ready
[ 1.950451] [drm] radeon: 2048M of GTT memory ready.
[ 1.950463] [drm] Loading verde Microcode
[ 1.950567] [drm] Internal thermal controller without fan control
[ 1.950629] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[ 1.952077] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 1.957180] [drm] radeon: dpm initialized
[ 1.958086] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 1.958139] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 1.959835] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[ 1.959837] [drm] PCIE gen 2 link speeds already enabled
[ 1.994584] usb 1-5: New USB device found, idVendor=0409, idProduct=0058
[ 1.994586] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.994587] usb 1-5: Product: USB2.0 Hub Controller
[ 1.994588] usb 1-5: Manufacturer: NEC Corporation
[ 1.994866] hub 1-5:1.0: USB hub found
[ 1.994961] hub 1-5:1.0: 4 ports detected
[ 1.999887] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 1.999987] radeon 0000:01:00.0: WB enabled
[ 1.999989] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff99f3d1dabc00
[ 1.999990] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff99f3d1dabc04
[ 1.999991] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff99f3d1dabc08
[ 1.999993] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff99f3d1dabc0c
[ 1.999994] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff99f3d1dabc10
[ 2.000245] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffbaef81e35a18
[ 2.020212] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff99f3d1dabc18
[ 2.020213] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff99f3d1dabc1c
[ 2.020215] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.020215] [drm] Driver supports precise vblank timestamp query.
[ 2.020216] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.020246] radeon 0000:01:00.0: radeon: using MSI.
[ 2.020272] [drm] radeon: irq initialized.
[ 2.023911] usb 3-1: New USB device found, idVendor=05e3, idProduct=0718
[ 2.023912] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.023913] usb 3-1: Product: USB Storage
[ 2.023914] usb 3-1: SerialNumber: 000000000033
[ 2.142024] usb 3-3: new high-speed USB device number 3 using ehci-pci
[ 2.223161] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.225375] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.225559] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.229275] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.289955] usb 1-5.1: new full-speed USB device number 3 using ehci-pci
[ 2.300069] usb 3-3: New USB device found, idVendor=058f, idProduct=6385
[ 2.300071] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.300072] usb 3-3: Product: Flash Card Reader/Writer
[ 2.300073] usb 3-3: Manufacturer: Generic
[ 2.300074] usb 3-3: SerialNumber: 058F63856479
[ 2.303377] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 2.303486] scsi host6: usb-storage 3-1:1.0
[ 2.303519] scsi host6: runtime PM trying to activate child device host6 but parent (3-1:1.0) is not active
[ 2.303568] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 2.303664] scsi host7: usb-storage 3-3:1.0
[ 2.303693] scsi host7: runtime PM trying to activate child device host7 but parent (3-3:1.0) is not active
[ 2.303744] usbcore: registered new interface driver usb-storage
[ 2.305026] usbcore: registered new interface driver uas
[ 2.414010] usb 1-5.1: New USB device found, idVendor=046d, idProduct=c52b
[ 2.414013] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.414015] usb 1-5.1: Product: USB Receiver
[ 2.414017] usb 1-5.1: Manufacturer: Logitech
[ 2.418104] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.424860] usbcore: registered new interface driver usbhid
[ 2.424861] usbhid: USB HID core driver
[ 2.428060] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-5.1/input2
[ 2.478036] tsc: Refined TSC clocksource calibration: 3200.021 MHz
[ 2.478047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e205d6fcb8, max_idle_ns: 440795212339 ns
[ 2.501968] usb 1-5.2: new full-speed USB device number 4 using ehci-pci
[ 2.539408] [drm] ring test on 0 succeeded in 2 usecs
[ 2.539411] [drm] ring test on 1 succeeded in 1 usecs
[ 2.539415] [drm] ring test on 2 succeeded in 1 usecs
[ 2.539427] [drm] ring test on 3 succeeded in 9 usecs
[ 2.539433] [drm] ring test on 4 succeeded in 4 usecs
[ 2.560224] input: Logitech K360 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.1/1-5.1:1.2/0003:046D:C52B.0003/0003:046D:4004.0005/input/input5
[ 2.560399] logitech-hidpp-device 0003:046D:4004.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:12.2-5.1:2
[ 2.562166] input: Logitech M185 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.1/1-5.1:1.2/0003:046D:C52B.0003/0003:046D:4008.0004/input/input6
[ 2.562286] logitech-hidpp-device 0003:046D:4008.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech M185] on usb-0000:00:12.2-5.1:1
[ 2.625893] usb 1-5.2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.625895] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.625896] usb 1-5.2: Product: USB Receiver
[ 2.625897] usb 1-5.2: Manufacturer: Logitech
[ 2.632681] logitech-djreceiver 0003:046D:C52B.0008: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-5.2/input2
[ 2.715151] [drm] ring test on 5 succeeded in 2 usecs
[ 2.715155] [drm] UVD initialized successfully.
[ 2.775177] input: Logitech M570 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0008/0003:046D:1028.0009/input/input7
[ 2.775349] logitech-hidpp-device 0003:046D:1028.0009: input,hidraw4: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:12.2-5.2:1
[ 2.824362] [drm] ring test on 6 succeeded in 20 usecs
[ 2.824377] [drm] ring test on 7 succeeded in 5 usecs
[ 2.824377] [drm] VCE initialized successfully.
[ 2.824598] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.824629] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.824654] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.824698] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.824818] [drm] ib test on ring 4 succeeded in 0 usecs
[ 3.311425] scsi 7:0:0:0: Direct-Access Generic 2.0 Reader -0 1.34 PQ: 0 ANSI: 4
[ 3.312394] scsi 7:0:0:1: Direct-Access Generic 2.0 Reader -1 1.32 PQ: 0 ANSI: 4
[ 3.313413] scsi 7:0:0:2: Direct-Access Generic 2.0 Reader -2 1.03 PQ: 0 ANSI: 4
[ 3.313782] sd 7:0:0:0: Attached scsi generic sg0 type 0
[ 3.313962] sd 7:0:0:1: Attached scsi generic sg1 type 0
[ 3.314231] sd 7:0:0:2: Attached scsi generic sg2 type 0
[ 3.316439] sd 7:0:0:0: [sda] Attached SCSI removable disk
[ 3.317064] sd 7:0:0:1: [sdb] Attached SCSI removable disk
[ 3.322822] scsi 6:0:0:0: Direct-Access KINGSTON SV300S37A60G 0016 PQ: 0 ANSI: 4
[ 3.323135] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.323815] sd 6:0:0:0: [sdd] 117231404 512-byte logical blocks: (60.0 GB/55.9 GiB)
[ 3.324810] sd 6:0:0:0: [sdd] Write Protect is off
[ 3.324812] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 3.325804] sd 6:0:0:0: [sdd] No Caching mode page found
[ 3.325808] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.329690] sdd: sdd1 sdd2
[ 3.332996] sd 7:0:0:2: [sdc] Attached SCSI removable disk
[ 3.344115] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 3.368412] random: fast init done
[ 3.502138] [drm] ib test on ring 5 succeeded
[ 3.502350] clocksource: Switched to clocksource tsc
[ 4.014174] [drm] ib test on ring 6 succeeded
[ 4.526225] [drm] ib test on ring 7 succeeded
[ 4.527251] [drm] Radeon Display Connectors
[ 4.527252] [drm] Connector 0:
[ 4.527252] [drm] DP-1
[ 4.527253] [drm] HPD4
[ 4.527254] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 4.527254] [drm] Encoders:
[ 4.527255] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.527255] [drm] Connector 1:
[ 4.527256] [drm] HDMI-A-1
[ 4.527256] [drm] HPD1
[ 4.527257] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.527257] [drm] Encoders:
[ 4.527258] [drm] DFP2: INTERNAL_UNIPHY2
[ 4.527258] [drm] Connector 2:
[ 4.527258] [drm] DVI-I-1
[ 4.527259] [drm] HPD2
[ 4.527260] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.527260] [drm] Encoders:
[ 4.527260] [drm] DFP3: INTERNAL_UNIPHY
[ 4.527261] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.699552] [drm] fb mappable at 0xD05D9000
[ 4.699552] [drm] vram apper at 0xD0000000
[ 4.699553] [drm] size 8294400
[ 4.699553] [drm] fb depth is 24
[ 4.699554] [drm] pitch is 7680
[ 4.699660] fbcon: radeondrmfb (fb0) is primary device
[ 4.699722] Console: switching to colour frame buffer device 240x67
[ 4.699747] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.714163] [drm] Initialized radeon 2.46.0 20080528 for 0000:01:00.0 on minor 0
[ 10.479420] random: crng init done
[ 13.280533] NET: Registered protocol family 38
[ 13.638522] raid6: sse2x1 gen() 5918 MB/s
[ 13.706519] raid6: sse2x1 xor() 4210 MB/s
[ 13.774525] raid6: sse2x2 gen() 9870 MB/s
[ 13.842528] raid6: sse2x2 xor() 6137 MB/s
[ 13.910534] raid6: sse2x4 gen() 11447 MB/s
[ 13.978535] raid6: sse2x4 xor() 6209 MB/s
[ 13.978535] raid6: using algorithm sse2x4 gen() 11447 MB/s
[ 13.978536] raid6: .... xor() 6209 MB/s, rmw enabled
[ 13.978537] raid6: using ssse3x2 recovery algorithm
[ 13.979649] xor: automatically using best checksumming function: avx
[ 13.992876] Btrfs loaded, crc32c=crc32c-intel
[ 14.059476] BTRFS: device fsid 2ee577dd-aceb-4137-bf49-37999f7619f1 devid 1 transid 4696 /dev/mapper/sdd2_crypt
[ 14.135531] BTRFS info (device dm-0): disk space caching is enabled
[ 14.135533] BTRFS info (device dm-0): has skinny extents
[ 14.662227] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.696321] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 14.696507] systemd[1]: Detected architecture x86-64.
[ 14.699269] systemd[1]: Set hostname to <MATE-16>.
[ 15.305087] systemd[1]: Reached target User and Group Name Lookups.
[ 15.305157] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.305167] systemd[1]: Reached target Remote File Systems.
[ 15.305198] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 15.305297] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.305338] systemd[1]: Listening on Journal Socket.
[ 15.305371] systemd[1]: Listening on udev Control Socket.
[ 15.596029] lp: driver loaded but no devices found
[ 15.604382] ppdev: user-space parallel port driver
[ 16.044177] BTRFS info (device dm-0): disk space caching is enabled
[ 16.075878] systemd-journald[467]: Received request to flush runtime journal from PID 1
[ 16.242042] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.276015] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 16.276021] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 16.276364] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 16.357753] kvm: Nested Virtualization enabled
[ 16.357756] kvm: Nested Paging enabled
[ 16.418778] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 16.418780] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 16.430560] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[ 16.430647] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 16.430732] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 16.430795] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 16.430866] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 16.431096] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 16.442647] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 16.442649] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.442651] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.442652] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 16.442653] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 16.442655] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 16.442656] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 16.442658] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 16.457626] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 16.457871] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 16.458086] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 16.458223] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 16.458345] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 16.458427] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 16.459023] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 16.459090] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 20.967142] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 21.074558] audit: type=1400 audit(1478159396.716:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1022 comm="apparmor_parser"
[ 21.074690] audit: type=1400 audit(1478159396.716:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1019 comm="apparmor_parser"
[ 21.074699] audit: type=1400 audit(1478159396.716:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1019 comm="apparmor_parser"
[ 21.074792] audit: type=1400 audit(1478159396.716:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1020 comm="apparmor_parser"
[ 21.075854] audit: type=1400 audit(1478159396.720:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1025 comm="apparmor_parser"
[ 21.076011] audit: type=1400 audit(1478159396.720:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1017 comm="apparmor_parser"
[ 21.076020] audit: type=1400 audit(1478159396.720:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1017 comm="apparmor_parser"
[ 21.076025] audit: type=1400 audit(1478159396.720:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1017 comm="apparmor_parser"
[ 21.076030] audit: type=1400 audit(1478159396.720:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1017 comm="apparmor_parser"
[ 21.076320] audit: type=1400 audit(1478159396.720:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1016 comm="apparmor_parser"
[ 23.663525] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 23.781119] r8169 0000:05:00.0 enp5s0: link down
[ 23.781203] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 26.735323] r8169 0000:05:00.0 enp5s0: link up
[ 26.735340] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 32.405211] Non-volatile memory driver v1.3
[31925.873873] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
[31925.873879] ata3: irq_stat 0x00000040, connection status changed
[31925.873884] ata3: SError: { CommWake 10B8B DevExch }
[31925.873893] ata3: hard resetting link
[31935.927473] ata3: softreset failed (device not ready)
[31935.927482] ata3: hard resetting link
[31937.759604] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[31937.792552] ata3.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[31937.792556] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[31937.795890] ata3.00: configured for UDMA/133
[31937.806024] ata3: EH complete
[31937.806321] scsi 2:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
[31937.840056] sd 2:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[31937.840072] sd 2:0:0:0: Attached scsi generic sg4 type 0
[31937.840221] sd 2:0:0:0: [sde] Write Protect is off
[31937.840225] sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
[31937.840300] sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[31937.850884] sde: sde1
[31937.851331] sd 2:0:0:0: [sde] Attached SCSI disk
[39671.237683] vboxdrv: loading out-of-tree module taints kernel.
[39671.238136] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[39671.245163] vboxdrv: Found 8 processor cores
[39671.265369] vboxdrv: TSC mode is Invariant, tentative frequency 3200105100 Hz
[39671.265371] vboxdrv: Successfully loaded version 5.1.6_Ubuntu (interface 0x00260000)
[39671.271408] VBoxNetFlt: Successfully started.
[39671.279786] VBoxNetAdp: Successfully started.
[39671.285344] VBoxPciLinuxInit
[39671.288496] vboxpci: IOMMU found
[40235.492840] VBoxPciLinuxLinuxUnload
[40430.413022] vboxdrv: Found 8 processor cores
[40430.431893] vboxdrv: TSC mode is Invariant, tentative frequency 3200026264 Hz
[40430.431895] vboxdrv: Successfully loaded version 5.1.6_Ubuntu (interface 0x00260000)
[40430.440906] VBoxNetFlt: Successfully started.
[40430.448095] VBoxNetAdp: Successfully started.
[40430.455017] VBoxPciLinuxInit
[40430.456342] vboxpci: IOMMU found
[40534.700276] SUPR0GipMap: fGetGipCpu=0x3
[40535.293104] vboxdrv: ffffffffc0000020 VMMR0.r0
[40535.444786] vboxdrv: ffffffffc0102020 VBoxDDR0.r0
[40535.465559] VBoxNetFlt: attached to 'enp5s0' / 44:8a:5b:d0:9e:47
[40535.486960] vboxpci: created IOMMU domain ffff99f0c9c2ec20
[40535.506583] device enp5s0 entered promiscuous mode
[40867.954412] device enp5s0 left promiscuous mode
[40871.891134] vboxnetflt: 0 out of 15149 packets were not sent (directed to host)
[40871.969825] vboxpci: freeing IOMMU domain ffff99f0c9c2ec20
[41167.642448] vboxdrv: ffffffffc0000020 VMMR0.r0
[41167.819989] vboxdrv: ffffffffc0102020 VBoxDDR0.r0
[41167.849272] VBoxNetFlt: attached to 'enp5s0' / 44:8a:5b:d0:9e:47
[41167.870678] vboxpci: created IOMMU domain ffff99f3db5c4020
[41167.881063] device enp5s0 entered promiscuous modemerci d'avance à vous
EDIT : j'ai pas une installation classique (partition btrfs chiffré + /boot séparé), mais je l'ai déjà fait plusieurs fois sans soucis auparavant !
Dernière modification par Yann35 (Le 03/11/2016, à 21:29)
Hors ligne
#2 Le 03/11/2016, à 21:31
- GammaDraconis
Re : problème d'installation ?
Tu es au courant des inconvénients de la 16.10 par rapport a la 16.04 ?
Discussion sur mon script de post-install pour Ubuntu 20.04LTS : https://forum.ubuntu-fr.org/viewtopic.php?id=2026344
Lien direct script : https://github.com/simbd/Ubuntu_20.04LTS_PostInstall
Démo vidéo (peertube) : https://video.ploud.fr/videos/watch/fb7 … 0d252ed2db
Hors ligne
#3 Le 03/11/2016, à 21:35
- Yann35
Re : problème d'installation ?
euh, ça dépend lesquel..
durée de maintient je sais (9mois), mais 16.04 ou 16.10 ça reste une version stable, non ?
Hors ligne
#4 Le 20/11/2016, à 13:51
- abelthorne
Re : problème d'installation ?
quand j'install un programme, il n'est pas rajouté au menu
Installé comment ? Depuis les dépôts ou autrement ? Il n'apparaît toujours pas si tu relances la session ?
quand je passe la souris au dessus d'un menu, je n'ai pas un "rectangle entourant le bouton survolé"
Tu parles du "tooltip" (le message qui donne une description de ce que tu survoles quand tu restes dessus quelques secondes) ou du rectangle de sélection (généralement en pointillés) quand tu cliques sur un élément ? Dans le second cas, c'est probablement le moteur Gtk3 qui a corrigé ce petit bug visuel du moteur Gtk2 précédemment utilisé.
quand je démare virtualbox (en ligne de commande), une icône neutre s'affiche dans le dock du bas (en mode "cupertino") au lieu de l'icone de virtualbox.
Qu'est-ce que tu appelles "mode cupertino" ?
je n'ai aucune proposition de driver pour ma CG alors que j'en ai en 16.04
Tu as apparemment un GPU AMD (ATI), donc le seul pilote disponible est le pilote libre, donc le gestionnaire de pilotes ne l'affiche pas (maintenant, il n'affiche les pilotes disponibles que lorsqu'il y en a plusieurs et donc un à choisir). En revanche, c'était normalement déjà le cas en 16.04.
Hors ligne
#5 Le 20/11/2016, à 16:27
- GammaDraconis
Re : problème d'installation ?
Je te conseille de rester en 16.04, la 16.10 n'a pas trop d'intérêt par rapport a la 16.04 a part avoir des logiciels plus récents.
Sinon le mode "cupertino" abelthorne c'est un profil prédéfini spécifique à Ubuntu Mate qui permet de changer le style d'apparence de l'interface, c'est celui qui ressemble le plus à "Mac OS X".
Discussion sur mon script de post-install pour Ubuntu 20.04LTS : https://forum.ubuntu-fr.org/viewtopic.php?id=2026344
Lien direct script : https://github.com/simbd/Ubuntu_20.04LTS_PostInstall
Démo vidéo (peertube) : https://video.ploud.fr/videos/watch/fb7 … 0d252ed2db
Hors ligne
Pages : 1