#1 Le 26/10/2016, à 18:07
- Richard_Burton
[dual screen]Affichage...aléatoire, disons.
Bonjour à toutes/tous,
Je poste, enfin, parce que je sèche lourdement sur un souci d'affichage. C'est l'occasion de créer un compte, après des années de lecture silencieuse et de remerciements intériorisés à la communauté.
Résumons, donc.
J'ai un ultraportable Asus Zenbook UX32VD, avec une carte graphique Nvidia Geforce GT620M (avec le driver non libre de Nvidia installé), monté avec un dual boot Win 7, Kubuntu 16.04 (avec interface xubuntu en utilisation principale, pour le moment). Il est connecté à un écran externe AOC 21 pouces ou, en secours, à un dell 19' (comportement identique avec les deux écrans).
Ca marche, plus ou moins (plutôt moins). Les soucis sont les suivants:
- J'ai pas d'affichage de la séquence de boot (du lancement à l'affichage du logo Xubuntu, en gros). Je sais que ça marche, parce que je peux, en aveugle, sélectionner dans grub un boot sur windows sans souci. Après, il y a du mieux.
- Je bosse principalement, mais pas exclusivement, avec le portable branché sur un écran externe. Là, c'est le bordel, sévère. En gros, ça s'affiche sur l'écran externe (9 fois sur 10, disons). Par contre, sur l'écran du portable, on est plutôt sur 1x/10 (peu de chance qu'il y ait un souci de hardware, je pense, mais sans certitude). Ecran noir complet, donc.
Dans les paramètres d'affichage, le comportement des écrans quand je bricole les options est déconcertant (j'ai trois (!) écrans détectés, et pas moyen d'avoir un affichage sur celui du portable).
Coté windows, pas de souci, par contre...
Je sèche pour remettre de l'ordre là-dedans, donc. Si quelqu'un ou quelqu'une avait une idée pour me permettre d'avancer... Merci, vraiment.
RB
NB: J'ai fait les sauvegardes pour formater la partition et refaire une install propre, mais sans accès au bios pour booter sur la clé usb, ça dépasse mes compétences...
NB2: Les contenus de deux fichiers, comme demandé...
xorg.conf (appelé xorg.conf.09252016, bizarrement)
Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
BusID "PCI:0@0:2:0"
Option "AccelMethod" "SNA"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:1@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSectionXorg.0.log
[ 33.785]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 33.785] X Protocol Version 11, Revision 0
[ 33.785] Build Operating System: Linux 3.13.0-95-generic i686 Ubuntu
[ 33.785] Current Operating System: Linux gf-UX32VD 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:05 UTC 2016 i686
[ 33.785] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic root=UUID=d37246da-8bcb-4b57-bd50-8815a6dd4cbe ro quiet splash
[ 33.785] Build Date: 14 September 2016 03:34:12PM
[ 33.785] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please see http://www.ubuntu.com/support)
[ 33.785] Current version of pixman: 0.33.6
[ 33.785] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33.785] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.785] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 26 16:44:39 2016
[ 33.988] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.006] (==) No Layout section. Using the first Screen section.
[ 34.006] (==) No screen section available. Using defaults.
[ 34.006] (**) |-->Screen "Default Screen Section" (0)
[ 34.006] (**) | |-->Monitor "<default monitor>"
[ 34.023] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 34.024] (==) Automatically adding devices
[ 34.024] (==) Automatically enabling devices
[ 34.024] (==) Automatically adding GPU devices
[ 34.024] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 34.024] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 34.024] Entry deleted from font path.
[ 34.024] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 34.024] Entry deleted from font path.
[ 34.024] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 34.024] Entry deleted from font path.
[ 34.024] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 34.024] Entry deleted from font path.
[ 34.024] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 34.024] Entry deleted from font path.
[ 34.024] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 34.024] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 34.024] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.029] (II) Loader magic: 0x802e3700
[ 34.029] (II) Module ABI versions:
[ 34.029] X.Org ANSI C Emulation: 0.4
[ 34.029] X.Org Video Driver: 20.0
[ 34.029] X.Org XInput driver : 22.1
[ 34.029] X.Org Server Extension : 9.0
[ 34.030] (++) using VT number 7
[ 34.030] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 34.031] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 34.032] (--) PCI:*(0:0:2:0) 8086:0166:1043:1507 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 34.032] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 34.032] (II) "glx" will be loaded by default.
[ 34.032] (II) LoadModule: "glx"
[ 34.046] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 34.712] (II) Module glx: vendor="X.Org Foundation"
[ 34.712] compiled for 1.18.4, module version = 1.0.0
[ 34.712] ABI class: X.Org Server Extension, version 9.0
[ 34.712] (==) AIGLX enabled
[ 34.712] (==) Matched intel as autoconfigured driver 0
[ 34.712] (==) Matched intel as autoconfigured driver 1
[ 34.712] (==) Matched modesetting as autoconfigured driver 2
[ 34.712] (==) Matched fbdev as autoconfigured driver 3
[ 34.712] (==) Matched vesa as autoconfigured driver 4
[ 34.712] (==) Assigned the driver to the xf86ConfigLayout
[ 34.712] (II) LoadModule: "intel"
[ 34.712] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 34.738] (II) Module intel: vendor="X.Org Foundation"
[ 34.738] compiled for 1.18.3, module version = 2.99.917
[ 34.738] Module class: X.Org Video Driver
[ 34.738] ABI class: X.Org Video Driver, version 20.0
[ 34.738] (II) LoadModule: "modesetting"
[ 34.738] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 34.739] (II) Module modesetting: vendor="X.Org Foundation"
[ 34.739] compiled for 1.18.4, module version = 1.18.4
[ 34.739] Module class: X.Org Video Driver
[ 34.739] ABI class: X.Org Video Driver, version 20.0
[ 34.739] (II) LoadModule: "fbdev"
[ 34.739] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 34.739] (II) Module fbdev: vendor="X.Org Foundation"
[ 34.739] compiled for 1.18.1, module version = 0.4.4
[ 34.739] Module class: X.Org Video Driver
[ 34.739] ABI class: X.Org Video Driver, version 20.0
[ 34.739] (II) LoadModule: "vesa"
[ 34.739] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 34.739] (II) Module vesa: vendor="X.Org Foundation"
[ 34.739] compiled for 1.18.1, module version = 2.3.4
[ 34.739] Module class: X.Org Video Driver
[ 34.739] ABI class: X.Org Video Driver, version 20.0
[ 34.739] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 34.739] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 34.739] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 34.739] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 34.739] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 34.739] (II) FBDEV: driver for framebuffer: fbdev
[ 34.739] (II) VESA: driver for VESA chipsets: vesa
[ 34.758] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 34.758] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.1 (Timo Aaltonen <tjaalton@debian.org>)
[ 34.758] (II) intel(0): SNA compiled for use with valgrind
[ 34.758] (WW) Falling back to old probe method for modesetting
[ 34.758] (WW) Falling back to old probe method for fbdev
[ 34.758] (II) Loading sub module "fbdevhw"
[ 34.758] (II) LoadModule: "fbdevhw"
[ 34.758] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 34.758] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 34.758] compiled for 1.18.4, module version = 0.0.2
[ 34.758] ABI class: X.Org Video Driver, version 20.0
[ 34.758] (WW) Falling back to old probe method for vesa
[ 34.760] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 34.760] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 34.761] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 34.761] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 34.761] (==) intel(0): RGB weight 888
[ 34.761] (==) intel(0): Default visual is TrueColor
[ 34.766] (II) intel(0): Output eDP1 has no monitor section
[ 34.784] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 34.784] (II) intel(0): Enabled output eDP1
[ 34.784] (II) intel(0): Output VGA1 has no monitor section
[ 34.784] (II) intel(0): Enabled output VGA1
[ 34.784] (II) intel(0): Output HDMI1 has no monitor section
[ 34.784] (II) intel(0): Enabled output HDMI1
[ 34.784] (II) intel(0): Output DP1 has no monitor section
[ 34.784] (II) intel(0): Enabled output DP1
[ 34.784] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 34.784] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 34.784] (II) intel(0): Enabled output VIRTUAL1
[ 34.784] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 34.784] (--) intel(0): Output VGA1 using initial mode 1024x768 on pipe 1
[ 34.784] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 2
[ 34.784] (==) intel(0): TearFree disabled
[ 34.784] (==) intel(0): DPI set to (96, 96)
[ 34.784] (II) Loading sub module "dri2"
[ 34.784] (II) LoadModule: "dri2"
[ 34.784] (II) Module "dri2" already built-in
[ 34.784] (II) Loading sub module "present"
[ 34.784] (II) LoadModule: "present"
[ 34.784] (II) Module "present" already built-in
[ 34.784] (II) UnloadModule: "modesetting"
[ 34.784] (II) Unloading modesetting
[ 34.784] (II) UnloadModule: "fbdev"
[ 34.784] (II) Unloading fbdev
[ 34.784] (II) UnloadSubModule: "fbdevhw"
[ 34.784] (II) Unloading fbdevhw
[ 34.784] (II) UnloadModule: "vesa"
[ 34.784] (II) Unloading vesa
[ 34.784] (==) Depth 24 pixmap format is 32 bpp
[ 34.899] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 34.899] (==) intel(0): Backing store enabled
[ 34.899] (==) intel(0): Silken mouse enabled
[ 34.901] (II) intel(0): HW Cursor enabled
[ 34.901] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 34.902] (==) intel(0): DPMS enabled
[ 34.902] (==) intel(0): Display hotplug detection enabled
[ 34.902] (II) intel(0): [DRI2] Setup complete
[ 34.902] (II) intel(0): [DRI2] DRI driver: i965
[ 34.902] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 34.902] (II) intel(0): direct rendering: DRI2 enabled
[ 34.902] (II) intel(0): hardware support for Present enabled
[ 34.902] (--) RandR disabled
[ 34.909] (II) SELinux: Disabled on system
[ 35.372] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 35.372] (II) AIGLX: enabled GLX_ARB_create_context
[ 35.372] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 35.372] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 35.372] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 35.372] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 35.372] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 35.372] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 35.372] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 35.372] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 35.372] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 35.372] (II) AIGLX: Loaded and initialized i965
[ 35.372] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 35.408] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 35.408] (II) intel(0): switch to mode 1024x768@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 35.408] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 2, position (0, 0), rotation normal, reflection none
[ 35.408] (II) intel(0): Setting screen physical size to 507 x 285
[ 35.530] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 35.530] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 35.530] (II) LoadModule: "evdev"
[ 35.530] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.649] (II) Module evdev: vendor="X.Org Foundation"
[ 35.649] compiled for 1.18.1, module version = 2.10.1
[ 35.649] Module class: X.Org XInput Driver
[ 35.649] ABI class: X.Org XInput driver, version 22.1
[ 35.649] (II) Using input driver 'evdev' for 'Video Bus'
[ 35.649] (**) Video Bus: always reports core events
[ 35.650] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 35.650] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 35.650] (--) evdev: Video Bus: Found keys
[ 35.650] (II) evdev: Video Bus: Configuring as keyboard
[ 35.650] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event5"
[ 35.650] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 35.650] (**) Option "xkb_rules" "evdev"
[ 35.650] (**) Option "xkb_model" "pc105"
[ 35.650] (**) Option "xkb_layout" "fr"
[ 35.650] (**) Option "xkb_variant" "latin9"
[ 35.668] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 35.668] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 35.668] (II) Using input driver 'evdev' for 'Video Bus'
[ 35.668] (**) Video Bus: always reports core events
[ 35.668] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 35.668] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 35.668] (--) evdev: Video Bus: Found keys
[ 35.668] (II) evdev: Video Bus: Configuring as keyboard
[ 35.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input12/event4"
[ 35.668] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 35.668] (**) Option "xkb_rules" "evdev"
[ 35.668] (**) Option "xkb_model" "pc105"
[ 35.668] (**) Option "xkb_layout" "fr"
[ 35.668] (**) Option "xkb_variant" "latin9"
[ 35.669] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 35.669] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.669] (II) Using input driver 'evdev' for 'Power Button'
[ 35.669] (**) Power Button: always reports core events
[ 35.669] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 35.669] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.669] (--) evdev: Power Button: Found keys
[ 35.669] (II) evdev: Power Button: Configuring as keyboard
[ 35.669] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 35.669] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 35.669] (**) Option "xkb_rules" "evdev"
[ 35.669] (**) Option "xkb_model" "pc105"
[ 35.669] (**) Option "xkb_layout" "fr"
[ 35.669] (**) Option "xkb_variant" "latin9"
[ 35.670] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 35.670] (II) No input driver specified, ignoring this device.
[ 35.670] (II) This device may have been added with another device file.
[ 35.670] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 35.670] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 35.670] (II) Using input driver 'evdev' for 'Sleep Button'
[ 35.670] (**) Sleep Button: always reports core events
[ 35.670] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 35.670] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 35.670] (--) evdev: Sleep Button: Found keys
[ 35.670] (II) evdev: Sleep Button: Configuring as keyboard
[ 35.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 35.670] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 35.670] (**) Option "xkb_rules" "evdev"
[ 35.670] (**) Option "xkb_model" "pc105"
[ 35.670] (**) Option "xkb_layout" "fr"
[ 35.670] (**) Option "xkb_variant" "latin9"
[ 35.671] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 35.671] (II) No input driver specified, ignoring this device.
[ 35.671] (II) This device may have been added with another device file.
[ 35.671] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 35.671] (II) No input driver specified, ignoring this device.
[ 35.671] (II) This device may have been added with another device file.
[ 35.672] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event10)
[ 35.672] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 35.672] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 35.672] (**) USB2.0 HD UVC WebCam: always reports core events
[ 35.672] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event10"
[ 35.672] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb330
[ 35.672] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 35.672] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 35.672] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input17/event10"
[ 35.672] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 35.672] (**) Option "xkb_rules" "evdev"
[ 35.672] (**) Option "xkb_model" "pc105"
[ 35.672] (**) Option "xkb_layout" "fr"
[ 35.672] (**) Option "xkb_variant" "latin9"
[ 35.672] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 35.672] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 35.672] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 35.672] (**) Asus WMI hotkeys: always reports core events
[ 35.672] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[ 35.673] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 35.673] (--) evdev: Asus WMI hotkeys: Found keys
[ 35.673] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 35.673] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input16/event9"
[ 35.673] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 35.673] (**) Option "xkb_rules" "evdev"
[ 35.673] (**) Option "xkb_model" "pc105"
[ 35.673] (**) Option "xkb_layout" "fr"
[ 35.673] (**) Option "xkb_variant" "latin9"
[ 35.673] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 35.673] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.673] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 35.673] (**) AT Translated Set 2 keyboard: always reports core events
[ 35.673] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 35.673] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 35.673] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 35.673] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 35.673] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 35.673] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 35.673] (**) Option "xkb_rules" "evdev"
[ 35.673] (**) Option "xkb_model" "pc105"
[ 35.673] (**) Option "xkb_layout" "fr"
[ 35.673] (**) Option "xkb_variant" "latin9"
[ 35.674] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[ 35.674] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 35.674] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 35.674] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 35.674] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 35.674] (II) LoadModule: "synaptics"
[ 35.674] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 35.674] (II) Module synaptics: vendor="X.Org Foundation"
[ 35.674] compiled for 1.18.1, module version = 1.8.2
[ 35.674] Module class: X.Org XInput Driver
[ 35.674] ABI class: X.Org XInput driver, version 22.1
[ 35.674] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 35.674] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 35.674] (**) Option "Device" "/dev/input/event6"
[ 35.736] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 35.736] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 35.736] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 35.736] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 35.736] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 35.736] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 35.736] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 35.736] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 35.736] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 35.736] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 35.760] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event6"
[ 35.760] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 35.760] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 35.760] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 35.760] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 35.760] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 35.760] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 35.760] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 35.760] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 35.760] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 35.761] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 35.761] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 36.786] (II) intel(0): EDID vendor "IVO", prod id 1331
[ 36.786] (II) intel(0): Printing DDC gathered Modelines:
[ 36.786] (II) intel(0): Modeline "1366x768"x0.0 77.00 1366 1424 1460 1560 768 771 778 822 -hsync -vsync (49.4 kHz eP)
[ 88.053] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 88.053] (II) No input driver specified, ignoring this device.
[ 88.053] (II) This device may have been added with another device file.
[ 88.084] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 3000 (/dev/input/event12)
[ 88.084] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[ 88.084] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 3000'
[ 88.084] (**) Microsoft Comfort Curve Keyboard 3000: always reports core events
[ 88.084] (**) evdev: Microsoft Comfort Curve Keyboard 3000: Device: "/dev/input/event12"
[ 88.084] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Vendor 0x45e Product 0x780
[ 88.084] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Found keys
[ 88.084] (II) evdev: Microsoft Comfort Curve Keyboard 3000: Configuring as keyboard
[ 88.084] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/0003:045E:0780.0002/input/input19/event12"
[ 88.084] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 3000" (type: KEYBOARD, id 14)
[ 88.084] (**) Option "xkb_rules" "evdev"
[ 88.084] (**) Option "xkb_model" "pc105"
[ 88.085] (**) Option "xkb_layout" "fr"
[ 88.085] (**) Option "xkb_variant" "latin9"
[ 88.085] (WW) Option "xkb_options" requires a string value
[ 88.096] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 3000 (/dev/input/event13)
[ 88.096] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[ 88.096] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 3000'
[ 88.096] (**) Microsoft Comfort Curve Keyboard 3000: always reports core events
[ 88.096] (**) evdev: Microsoft Comfort Curve Keyboard 3000: Device: "/dev/input/event13"
[ 88.096] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Vendor 0x45e Product 0x780
[ 88.096] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Found 1 mouse buttons
[ 88.096] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Found scroll wheel(s)
[ 88.096] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Found relative axes
[ 88.096] (II) evdev: Microsoft Comfort Curve Keyboard 3000: Forcing relative x/y axes to exist.
[ 88.096] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Found absolute axes
[ 88.096] (II) evdev: Microsoft Comfort Curve Keyboard 3000: Forcing absolute x/y axes to exist.
[ 88.096] (--) evdev: Microsoft Comfort Curve Keyboard 3000: Found keys
[ 88.096] (II) evdev: Microsoft Comfort Curve Keyboard 3000: Configuring as mouse
[ 88.096] (II) evdev: Microsoft Comfort Curve Keyboard 3000: Configuring as keyboard
[ 88.096] (II) evdev: Microsoft Comfort Curve Keyboard 3000: Adding scrollwheel support
[ 88.096] (**) evdev: Microsoft Comfort Curve Keyboard 3000: YAxisMapping: buttons 4 and 5
[ 88.096] (**) evdev: Microsoft Comfort Curve Keyboard 3000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 88.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.1/0003:045E:0780.0003/input/input20/event13"
[ 88.097] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 3000" (type: KEYBOARD, id 15)
[ 88.097] (**) Option "xkb_rules" "evdev"
[ 88.097] (**) Option "xkb_model" "pc105"
[ 88.097] (**) Option "xkb_layout" "fr"
[ 88.097] (**) Option "xkb_variant" "latin9"
[ 88.097] (WW) Option "xkb_options" requires a string value
[ 88.097] (II) evdev: Microsoft Comfort Curve Keyboard 3000: initialized for relative axes.
[ 88.097] (WW) evdev: Microsoft Comfort Curve Keyboard 3000: ignoring absolute axes.
[ 88.097] (**) Microsoft Comfort Curve Keyboard 3000: (accel) keeping acceleration scheme 1
[ 88.097] (**) Microsoft Comfort Curve Keyboard 3000: (accel) acceleration profile 0
[ 88.097] (**) Microsoft Comfort Curve Keyboard 3000: (accel) acceleration factor: 2.000
[ 88.097] (**) Microsoft Comfort Curve Keyboard 3000: (accel) acceleration threshold: 4
[ 88.147] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event11)
[ 88.148] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 88.148] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 88.148] (**) USB Optical Mouse: always reports core events
[ 88.148] (**) evdev: USB Optical Mouse: Device: "/dev/input/event11"
[ 88.204] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 88.204] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 88.204] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 88.204] (--) evdev: USB Optical Mouse: Found relative axes
[ 88.204] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 88.204] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 88.204] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 88.204] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 88.204] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 88.204] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/0003:1BCF:0005.0001/input/input18/event11"
[ 88.204] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 16)
[ 88.204] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 88.205] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 88.205] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 88.205] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 88.205] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 122.927] (II) intel(0): resizing framebuffer to 1680x1050
[ 126.228] (II) intel(0): switch to mode 1280x720@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 127.668] (II) intel(0): switch to mode 1680x1050@59.9 on HDMI1 using pipe 2, position (0, 0), rotation normal, reflection noneDernière modification par Richard_Burton (Le 26/10/2016, à 18:08)
Hors ligne