Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 25/10/2016, à 19:06

XZKS

Problème multi écran - 2 cartes graphiques (intel/nvidia)

Bonjour,

Après plusieurs recherches et d'essais, je n'arrive toujours pas à mettre en place le multi-écran.

Je possède un Asus N76VM sous Ubuntu 14.04.5.
2 cartes graphiques:
- Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
- NVIDIA Corporation GF108M [GeForce GT 635M] (rev ff)

Et un second écran Asus MX279H


Mon problème:

1e cas: j'utilise le pilote libre xorg.
Écran pc -> s'allume
Second écran -> ne s'allume pas

++ xrandr ne détecte pas de port hdmi

Screen 0: minimum 320 x 200, current 1600 x 900, maximum 32767 x 32767
LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 214mm
   1600x900       60.1*+
   1440x900       59.9  
   1360x768       59.8     60.0  
   1152x864       60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

2e cas: j'utilise le pilote nvidia (j'ai essayé toutes les versions).
Écran pc -> ne s'allume pas
Second -> écran s'allume

++ xrandr détecte seulement le port hdmi

J'ai essayé aussi d'installer bumblebee mais sans succès.
------------------------------------------------------------

Voici le /etc/X11/xorg.conf:

Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
EndSection

Section "Device"
    Identifier "intel"
    Driver "intel"
    BusID "PCI:0@0:2:0"
    Option "AccelMethod" "SNA"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection

Voici le /var/log/Xorg.0.log

[     7.032] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[     7.033] X Protocol Version 11, Revision 0
[     7.033] Build Operating System: Linux 3.2.0-76-generic x86_64 Ubuntu
[     7.033] Current Operating System: Linux Ksatra 3.13.0-100-generic #147-Ubuntu SMP Tue Oct 18 16:48:51 UTC 2016 x86_64
[     7.033] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-100-generic.efi.signed root=UUID=98aa4e17-7863-4d32-8899-b29c00dc7dc4 ro quiet splash vt.handoff=7
[     7.033] Build Date: 12 February 2015  02:49:29PM
[     7.033] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support) 
[     7.033] Current version of pixman: 0.30.2
[     7.033] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     7.033] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.033] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 25 19:44:17 2016
[     7.033] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.033] (==) No Layout section.  Using the first Screen section.
[     7.033] (==) No screen section available. Using defaults.
[     7.033] (**) |-->Screen "Default Screen Section" (0)
[     7.033] (**) |   |-->Monitor "<default monitor>"
[     7.034] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     7.034] (==) Automatically adding devices
[     7.034] (==) Automatically enabling devices
[     7.034] (==) Automatically adding GPU devices
[     7.034] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     7.034] 	Entry deleted from font path.
[     7.034] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     7.034] 	Entry deleted from font path.
[     7.034] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     7.034] 	Entry deleted from font path.
[     7.034] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     7.034] 	Entry deleted from font path.
[     7.034] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     7.034] 	Entry deleted from font path.
[     7.034] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     7.034] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     7.034] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.034] (II) Loader magic: 0x7fa5f5613d40
[     7.034] (II) Module ABI versions:
[     7.034] 	X.Org ANSI C Emulation: 0.4
[     7.034] 	X.Org Video Driver: 15.0
[     7.034] 	X.Org XInput driver : 20.0
[     7.034] 	X.Org Server Extension : 8.0
[     7.034] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.035] (--) PCI:*(0:0:2:0) 8086:0166:1043:1477 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[     7.035] (--) PCI: (0:1:0:0) 10de:0de3:1043:1477 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     7.035] Initializing built-in extension Generic Event Extension
[     7.035] Initializing built-in extension SHAPE
[     7.035] Initializing built-in extension MIT-SHM
[     7.035] Initializing built-in extension XInputExtension
[     7.035] Initializing built-in extension XTEST
[     7.035] Initializing built-in extension BIG-REQUESTS
[     7.035] Initializing built-in extension SYNC
[     7.035] Initializing built-in extension XKEYBOARD
[     7.035] Initializing built-in extension XC-MISC
[     7.035] Initializing built-in extension SECURITY
[     7.035] Initializing built-in extension XINERAMA
[     7.035] Initializing built-in extension XFIXES
[     7.035] Initializing built-in extension RENDER
[     7.035] Initializing built-in extension RANDR
[     7.035] Initializing built-in extension COMPOSITE
[     7.035] Initializing built-in extension DAMAGE
[     7.035] Initializing built-in extension MIT-SCREEN-SAVER
[     7.035] Initializing built-in extension DOUBLE-BUFFER
[     7.035] Initializing built-in extension RECORD
[     7.035] Initializing built-in extension DPMS
[     7.035] Initializing built-in extension Present
[     7.035] Initializing built-in extension DRI3
[     7.035] Initializing built-in extension X-Resource
[     7.035] Initializing built-in extension XVideo
[     7.035] Initializing built-in extension XVideo-MotionCompensation
[     7.035] Initializing built-in extension SELinux
[     7.035] Initializing built-in extension XFree86-VidModeExtension
[     7.035] Initializing built-in extension XFree86-DGA
[     7.035] Initializing built-in extension XFree86-DRI
[     7.035] Initializing built-in extension DRI2
[     7.035] (II) LoadModule: "glx"
[     7.036] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.046] (II) Module glx: vendor="X.Org Foundation"
[     7.046] 	compiled for 1.15.1, module version = 1.0.0
[     7.046] 	ABI class: X.Org Server Extension, version 8.0
[     7.046] (==) AIGLX enabled
[     7.046] Loading extension GLX
[     7.046] (==) Matched intel as autoconfigured driver 0
[     7.046] (==) Matched intel as autoconfigured driver 1
[     7.046] (==) Matched modesetting as autoconfigured driver 2
[     7.046] (==) Matched fbdev as autoconfigured driver 3
[     7.046] (==) Matched vesa as autoconfigured driver 4
[     7.046] (==) Assigned the driver to the xf86ConfigLayout
[     7.046] (II) LoadModule: "intel"
[     7.047] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     7.049] (II) Module intel: vendor="X.Org Foundation"
[     7.049] 	compiled for 1.15.1, module version = 2.99.910
[     7.049] 	Module class: X.Org Video Driver
[     7.049] 	ABI class: X.Org Video Driver, version 15.0
[     7.049] (II) LoadModule: "modesetting"
[     7.049] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.051] (II) Module modesetting: vendor="X.Org Foundation"
[     7.051] 	compiled for 1.15.0, module version = 0.8.1
[     7.051] 	Module class: X.Org Video Driver
[     7.051] 	ABI class: X.Org Video Driver, version 15.0
[     7.051] (II) LoadModule: "fbdev"
[     7.051] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     7.051] (II) Module fbdev: vendor="X.Org Foundation"
[     7.051] 	compiled for 1.15.0, module version = 0.4.4
[     7.051] 	Module class: X.Org Video Driver
[     7.051] 	ABI class: X.Org Video Driver, version 15.0
[     7.051] (II) LoadModule: "vesa"
[     7.052] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     7.052] (II) Module vesa: vendor="X.Org Foundation"
[     7.052] 	compiled for 1.15.0, module version = 2.3.3
[     7.052] 	Module class: X.Org Video Driver
[     7.052] 	ABI class: X.Org Video Driver, version 15.0
[     7.052] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     7.052] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     7.052] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     7.052] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     7.052] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     7.052] (II) FBDEV: driver for framebuffer: fbdev
[     7.052] (II) VESA: driver for VESA chipsets: vesa
[     7.052] (++) using VT number 7

[     7.052] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 (Timo Aaltonen <tjaalton@debian.org>)
[     7.053] (WW) Falling back to old probe method for modesetting
[     7.053] (WW) Falling back to old probe method for fbdev
[     7.053] (II) Loading sub module "fbdevhw"
[     7.053] (II) LoadModule: "fbdevhw"
[     7.053] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     7.053] (II) Module fbdevhw: vendor="X.Org Foundation"
[     7.053] 	compiled for 1.15.1, module version = 0.0.2
[     7.053] 	ABI class: X.Org Video Driver, version 15.0
[     7.053] (WW) Falling back to old probe method for vesa
[     7.053] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[     7.053] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[     7.053] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     7.053] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     7.053] (==) intel(0): RGB weight 888
[     7.053] (==) intel(0): Default visual is TrueColor
[     7.053] (**) intel(0): Framebuffer tiled
[     7.053] (**) intel(0): Pixmaps tiled
[     7.053] (**) intel(0): "Tear free" disabled
[     7.053] (**) intel(0): Forcing per-crtc-pixmaps? no
[     7.054] (II) intel(0): Output LVDS1 has no monitor section
[     7.054] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
[     7.054] (II) intel(0): Output VGA1 has no monitor section
[     7.054] (II) intel(0): Output VIRTUAL1 has no monitor section
[     7.054] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[     7.054] (==) intel(0): DPI set to (96, 96)
[     7.054] (II) Loading sub module "dri2"
[     7.054] (II) LoadModule: "dri2"
[     7.054] (II) Module "dri2" already built-in
[     7.054] (II) UnloadModule: "modesetting"
[     7.054] (II) Unloading modesetting
[     7.054] (II) UnloadModule: "fbdev"
[     7.054] (II) Unloading fbdev
[     7.054] (II) UnloadSubModule: "fbdevhw"
[     7.054] (II) Unloading fbdevhw
[     7.054] (II) UnloadModule: "vesa"
[     7.054] (II) Unloading vesa
[     7.054] (==) Depth 24 pixmap format is 32 bpp
[     7.054] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[     7.054] (==) intel(0): Backing store enabled
[     7.054] (==) intel(0): Silken mouse enabled
[     7.054] (II) intel(0): HW Cursor enabled
[     7.054] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     7.054] (==) intel(0): DPMS enabled
[     7.054] (II) intel(0): [DRI2] Setup complete
[     7.054] (II) intel(0): [DRI2]   DRI driver: i965
[     7.054] (II) intel(0): [DRI2]   VDPAU driver: i965
[     7.054] (II) intel(0): direct rendering: DRI2 Enabled
[     7.054] (==) intel(0): hotplug detection: "enabled"
[     7.054] (--) RandR disabled
[     7.059] (II) SELinux: Disabled on system
[     7.072] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     7.072] (II) AIGLX: enabled GLX_ARB_create_context
[     7.072] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     7.072] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     7.072] (II) AIGLX: enabled GLX_INTEL_swap_event
[     7.072] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     7.072] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     7.072] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     7.072] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     7.072] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     7.073] (II) AIGLX: Loaded and initialized i965
[     7.073] (II) GLX: Initialized DRI2 GL provider for screen 0
[     7.074] (II) intel(0): switch to mode 1600x900@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[     7.100] (II) intel(0): Setting screen physical size to 423 x 238
[     7.106] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     7.108] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     7.108] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.108] (II) LoadModule: "evdev"
[     7.108] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.108] (II) Module evdev: vendor="X.Org Foundation"
[     7.108] 	compiled for 1.15.0, module version = 2.8.2
[     7.108] 	Module class: X.Org XInput Driver
[     7.108] 	ABI class: X.Org XInput driver, version 20.0
[     7.108] (II) Using input driver 'evdev' for 'Power Button'
[     7.108] (**) Power Button: always reports core events
[     7.108] (**) evdev: Power Button: Device: "/dev/input/event2"
[     7.108] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.108] (--) evdev: Power Button: Found keys
[     7.108] (II) evdev: Power Button: Configuring as keyboard
[     7.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     7.108] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.108] (**) Option "xkb_rules" "evdev"
[     7.108] (**) Option "xkb_model" "pc105"
[     7.108] (**) Option "xkb_layout" "fr"
[     7.110] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm
[     7.110] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     7.110] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     7.110] (II) Using input driver 'evdev' for 'Video Bus'
[     7.110] (**) Video Bus: always reports core events
[     7.110] (**) evdev: Video Bus: Device: "/dev/input/event13"
[     7.110] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     7.110] (--) evdev: Video Bus: Found keys
[     7.110] (II) evdev: Video Bus: Configuring as keyboard
[     7.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input20/event13"
[     7.110] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     7.110] (**) Option "xkb_rules" "evdev"
[     7.110] (**) Option "xkb_model" "pc105"
[     7.111] (**) Option "xkb_layout" "fr"
[     7.111] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[     7.111] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     7.111] (II) Using input driver 'evdev' for 'Video Bus'
[     7.111] (**) Video Bus: always reports core events
[     7.111] (**) evdev: Video Bus: Device: "/dev/input/event12"
[     7.111] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     7.111] (--) evdev: Video Bus: Found keys
[     7.111] (II) evdev: Video Bus: Configuring as keyboard
[     7.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input19/event12"
[     7.111] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     7.111] (**) Option "xkb_rules" "evdev"
[     7.111] (**) Option "xkb_model" "pc105"
[     7.111] (**) Option "xkb_layout" "fr"
[     7.111] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     7.111] (II) No input driver specified, ignoring this device.
[     7.111] (II) This device may have been added with another device file.
[     7.111] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     7.111] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     7.111] (II) Using input driver 'evdev' for 'Sleep Button'
[     7.111] (**) Sleep Button: always reports core events
[     7.111] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[     7.111] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     7.111] (--) evdev: Sleep Button: Found keys
[     7.111] (II) evdev: Sleep Button: Configuring as keyboard
[     7.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[     7.111] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     7.111] (**) Option "xkb_rules" "evdev"
[     7.111] (**) Option "xkb_model" "pc105"
[     7.111] (**) Option "xkb_layout" "fr"
[     7.112] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     7.112] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[     7.112] (II) config/udev: Adding input device Razer Razer Mamba (/dev/input/event6)
[     7.112] (**) Razer Razer Mamba: Applying InputClass "evdev pointer catchall"
[     7.112] (II) Using input driver 'evdev' for 'Razer Razer Mamba'
[     7.112] (**) Razer Razer Mamba: always reports core events
[     7.112] (**) evdev: Razer Razer Mamba: Device: "/dev/input/event6"
[     7.112] (--) evdev: Razer Razer Mamba: Vendor 0x1532 Product 0x24
[     7.112] (--) evdev: Razer Razer Mamba: Found 9 mouse buttons
[     7.112] (--) evdev: Razer Razer Mamba: Found scroll wheel(s)
[     7.112] (--) evdev: Razer Razer Mamba: Found relative axes
[     7.112] (--) evdev: Razer Razer Mamba: Found x and y relative axes
[     7.112] (II) evdev: Razer Razer Mamba: Configuring as mouse
[     7.112] (II) evdev: Razer Razer Mamba: Adding scrollwheel support
[     7.112] (**) evdev: Razer Razer Mamba: YAxisMapping: buttons 4 and 5
[     7.112] (**) evdev: Razer Razer Mamba: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input13/event6"
[     7.112] (II) XINPUT: Adding extended input device "Razer Razer Mamba" (type: MOUSE, id 10)
[     7.112] (II) evdev: Razer Razer Mamba: initialized for relative axes.
[     7.112] (**) Razer Razer Mamba: (accel) keeping acceleration scheme 1
[     7.112] (**) Razer Razer Mamba: (accel) acceleration profile 0
[     7.112] (**) Razer Razer Mamba: (accel) acceleration factor: 2.000
[     7.112] (**) Razer Razer Mamba: (accel) acceleration threshold: 4
[     7.112] (II) config/udev: Adding input device Razer Razer Mamba (/dev/input/mouse1)
[     7.112] (II) No input driver specified, ignoring this device.
[     7.112] (II) This device may have been added with another device file.
[     7.112] (II) config/udev: Adding input device Razer Razer Mamba (/dev/input/event7)
[     7.112] (**) Razer Razer Mamba: Applying InputClass "evdev keyboard catchall"
[     7.112] (II) Using input driver 'evdev' for 'Razer Razer Mamba'
[     7.112] (**) Razer Razer Mamba: always reports core events
[     7.112] (**) evdev: Razer Razer Mamba: Device: "/dev/input/event7"
[     7.112] (--) evdev: Razer Razer Mamba: Vendor 0x1532 Product 0x24
[     7.112] (--) evdev: Razer Razer Mamba: Found 1 mouse buttons
[     7.112] (--) evdev: Razer Razer Mamba: Found scroll wheel(s)
[     7.112] (--) evdev: Razer Razer Mamba: Found relative axes
[     7.112] (II) evdev: Razer Razer Mamba: Forcing relative x/y axes to exist.
[     7.112] (--) evdev: Razer Razer Mamba: Found absolute axes
[     7.112] (II) evdev: Razer Razer Mamba: Forcing absolute x/y axes to exist.
[     7.112] (--) evdev: Razer Razer Mamba: Found keys
[     7.112] (II) evdev: Razer Razer Mamba: Configuring as mouse
[     7.112] (II) evdev: Razer Razer Mamba: Configuring as keyboard
[     7.112] (II) evdev: Razer Razer Mamba: Adding scrollwheel support
[     7.112] (**) evdev: Razer Razer Mamba: YAxisMapping: buttons 4 and 5
[     7.112] (**) evdev: Razer Razer Mamba: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.113] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input14/event7"
[     7.113] (II) XINPUT: Adding extended input device "Razer Razer Mamba" (type: KEYBOARD, id 11)
[     7.113] (**) Option "xkb_rules" "evdev"
[     7.113] (**) Option "xkb_model" "pc105"
[     7.113] (**) Option "xkb_layout" "fr"
[     7.113] (II) evdev: Razer Razer Mamba: initialized for relative axes.
[     7.113] (WW) evdev: Razer Razer Mamba: ignoring absolute axes.
[     7.113] (**) Razer Razer Mamba: (accel) keeping acceleration scheme 1
[     7.113] (**) Razer Razer Mamba: (accel) acceleration profile 0
[     7.113] (**) Razer Razer Mamba: (accel) acceleration factor: 2.000
[     7.113] (**) Razer Razer Mamba: (accel) acceleration threshold: 4
[     7.113] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/event8)
[     7.113] (**) Microsoft Microsoft Nano Transceiver 1.1: Applying InputClass "evdev keyboard catchall"
[     7.113] (II) Using input driver 'evdev' for 'Microsoft Microsoft Nano Transceiver 1.1'
[     7.113] (**) Microsoft Microsoft Nano Transceiver 1.1: always reports core events
[     7.113] (**) evdev: Microsoft Microsoft Nano Transceiver 1.1: Device: "/dev/input/event8"
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Vendor 0x45e Product 0x7fd
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found keys
[     7.113] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Configuring as keyboard
[     7.113] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input15/event8"
[     7.113] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver 1.1" (type: KEYBOARD, id 12)
[     7.113] (**) Option "xkb_rules" "evdev"
[     7.113] (**) Option "xkb_model" "pc105"
[     7.113] (**) Option "xkb_layout" "fr"
[     7.113] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/event9)
[     7.113] (**) Microsoft Microsoft Nano Transceiver 1.1: Applying InputClass "evdev keyboard catchall"
[     7.113] (II) Using input driver 'evdev' for 'Microsoft Microsoft Nano Transceiver 1.1'
[     7.113] (**) Microsoft Microsoft Nano Transceiver 1.1: always reports core events
[     7.113] (**) evdev: Microsoft Microsoft Nano Transceiver 1.1: Device: "/dev/input/event9"
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Vendor 0x45e Product 0x7fd
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found 1 mouse buttons
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found scroll wheel(s)
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found relative axes
[     7.113] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Forcing relative x/y axes to exist.
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found absolute axes
[     7.113] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Forcing absolute x/y axes to exist.
[     7.113] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found keys
[     7.113] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Configuring as mouse
[     7.113] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Configuring as keyboard
[     7.113] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Adding scrollwheel support
[     7.113] (**) evdev: Microsoft Microsoft Nano Transceiver 1.1: YAxisMapping: buttons 4 and 5
[     7.113] (**) evdev: Microsoft Microsoft Nano Transceiver 1.1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.113] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input16/event9"
[     7.113] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver 1.1" (type: KEYBOARD, id 13)
[     7.113] (**) Option "xkb_rules" "evdev"
[     7.113] (**) Option "xkb_model" "pc105"
[     7.114] (**) Option "xkb_layout" "fr"
[     7.114] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: initialized for relative axes.
[     7.114] (WW) evdev: Microsoft Microsoft Nano Transceiver 1.1: ignoring absolute axes.
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) keeping acceleration scheme 1
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration profile 0
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration factor: 2.000
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration threshold: 4
[     7.114] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/event10)
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: Applying InputClass "evdev pointer catchall"
[     7.114] (II) Using input driver 'evdev' for 'Microsoft Microsoft Nano Transceiver 1.1'
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: always reports core events
[     7.114] (**) evdev: Microsoft Microsoft Nano Transceiver 1.1: Device: "/dev/input/event10"
[     7.114] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Vendor 0x45e Product 0x7fd
[     7.114] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found 9 mouse buttons
[     7.114] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found scroll wheel(s)
[     7.114] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found relative axes
[     7.114] (--) evdev: Microsoft Microsoft Nano Transceiver 1.1: Found x and y relative axes
[     7.114] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Configuring as mouse
[     7.114] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: Adding scrollwheel support
[     7.114] (**) evdev: Microsoft Microsoft Nano Transceiver 1.1: YAxisMapping: buttons 4 and 5
[     7.114] (**) evdev: Microsoft Microsoft Nano Transceiver 1.1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.114] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/input/input17/event10"
[     7.114] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver 1.1" (type: MOUSE, id 14)
[     7.114] (II) evdev: Microsoft Microsoft Nano Transceiver 1.1: initialized for relative axes.
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) keeping acceleration scheme 1
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration profile 0
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration factor: 2.000
[     7.114] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration threshold: 4
[     7.114] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/mouse2)
[     7.114] (II) No input driver specified, ignoring this device.
[     7.114] (II) This device may have been added with another device file.
[     7.115] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event5)
[     7.115] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[     7.115] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[     7.115] (**) ASUS USB2.0 Webcam: always reports core events
[     7.115] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event5"
[     7.115] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x1bcf Product 0x2883
[     7.115] (--) evdev: ASUS USB2.0 Webcam: Found keys
[     7.115] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[     7.115] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input12/event5"
[     7.115] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 15)
[     7.115] (**) Option "xkb_rules" "evdev"
[     7.115] (**) Option "xkb_model" "pc105"
[     7.115] (**) Option "xkb_layout" "fr"
[     7.115] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[     7.115] (II) No input driver specified, ignoring this device.
[     7.115] (II) This device may have been added with another device file.
[     7.115] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[     7.115] (II) No input driver specified, ignoring this device.
[     7.115] (II) This device may have been added with another device file.
[     7.115] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[     7.115] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     7.115] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[     7.115] (**) Asus WMI hotkeys: always reports core events
[     7.115] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event11"
[     7.115] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[     7.115] (--) evdev: Asus WMI hotkeys: Found keys
[     7.115] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[     7.115] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input18/event11"
[     7.115] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 16)
[     7.115] (**) Option "xkb_rules" "evdev"
[     7.115] (**) Option "xkb_model" "pc105"
[     7.115] (**) Option "xkb_layout" "fr"
[     7.116] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     7.116] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     7.116] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     7.116] (**) AT Translated Set 2 keyboard: always reports core events
[     7.116] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[     7.116] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     7.116] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     7.116] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     7.116] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     7.116] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[     7.116] (**) Option "xkb_rules" "evdev"
[     7.116] (**) Option "xkb_model" "pc105"
[     7.116] (**) Option "xkb_layout" "fr"
[     7.116] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event4)
[     7.116] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     7.116] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     7.116] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     7.116] (II) LoadModule: "synaptics"
[     7.116] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     7.116] (II) Module synaptics: vendor="X.Org Foundation"
[     7.116] 	compiled for 1.15.0, module version = 1.7.4
[     7.116] 	Module class: X.Org XInput Driver
[     7.116] 	ABI class: X.Org XInput driver, version 20.0
[     7.116] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     7.116] (**) ETPS/2 Elantech Touchpad: always reports core events
[     7.116] (**) Option "Device" "/dev/input/event4"
[     7.152] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[     7.152] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3420 (res 31)
[     7.152] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2052 (res 31)
[     7.152] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     7.152] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     7.152] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[     7.152] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     7.152] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     7.152] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     7.152] (**) ETPS/2 Elantech Touchpad: always reports core events
[     7.164] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event4"
[     7.164] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 18)
[     7.164] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     7.164] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     7.164] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.050
[     7.164] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     7.164] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     7.164] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     7.164] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     7.164] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     7.164] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[     7.164] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     7.202] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[     7.432] (II) intel(0): EDID vendor "AUO", prod id 4766
[     7.432] (II) intel(0): Printing DDC gathered Modelines:
[     7.432] (II) intel(0): Modeline "1600x900"x0.0   97.55  1600 1648 1680 1754  900 903 909 926 -hsync -vsync (55.6 kHz eP)
[    10.611] (II) XKB: reuse xkmfile /var/lib/xkb/server-25397AF0809A6980CFD7900CFEA75DD72B66498B.xkm
[    11.236] (II) XKB: reuse xkmfile /var/lib/xkb/server-4CCA0437B0B5529C7C44C7931A7373D005909F34.xkm
[    11.243] (II) XKB: reuse xkmfile /var/lib/xkb/server-4CCA0437B0B5529C7C44C7931A7373D005909F34.xkm

J'espère que vous pourrez m'aider à résoudre mon problème,

Merci,

Dernière modification par XZKS (Le 25/10/2016, à 19:11)

Hors ligne

#2 Le 26/10/2016, à 10:44

akebonjourbob

Re : Problème multi écran - 2 cartes graphiques (intel/nvidia)

Salut,

Lorsque tu essaies avec le pilote nvidia, sur quelle carte graphique es tu ? As tu essayé avec les deux ?
Normalement dans le nvidia-settings, tu as possibilité de choisir quelle carte utiliser ( prime ). Après la carte choisie, il faut que tu te délog/relog pour appliquer les changements.


nvidia-prime-profiles.jpg?cache=
( image de la doc ubuntu sur prime )


Ubuntu Gnome 16.04 sur MSI GE60 2OE ( avec technologie nvidia optimus, malheureusement... )
Ubuntu 16.04 + Windows 10 ( beuhaaa ) sur Asus P8B75LM + i5 3450 + MSI RX 480

Hors ligne