#51 Le 18/07/2016, à 10:55
- certes
Re : Problème de lenteurs Ubuntu16.04
Donc je te propose de faire, au moins mmomentanément, comme moi :
mettre le swappines à zéro
verdict
1) swappiness à 0
echo vm.swappiness=0 | sudo tee -a /etc/sysctl.conf
vm.swappiness=0
redémarrage
2) vérification
cat /proc/sys/vm/swappiness
0
3) top M
top -d 12
M
la réponse
3a) au démarrage sans ouvrir aucun logiciel
juste le terminal
top - 10:15:36 up 2 min, 1 user, load average: 2,24, 1,28, 0,52
Tâches: 270 total, 1 en cours, 269 en veille, 0 arrêté, 0 zombie
%Cpu(s): 0,6 ut, 0,2 sy, 0,0 ni, 74,5 id, 24,7 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem : 6098268 total, 4415472 libr, 849604 util, 833192 tamp/cache
KiB Éch: 6287356 total, 6287356 libr, 0 util. 4929788 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
2057 user 20 0 1264504 166124 89208 S 0,0 2,7 0:02.11 compiz
2206 user 20 0 1382296 148876 69116 D 1,2 2,4 0:03.12 gnome-soft+
1062 mysql 20 0 1915596 140260 15972 S 0,0 2,3 0:00.28 mysqld
1031 root 20 0 247744 64924 39548 S 1,7 1,1 0:02.42 Xorg
2254 user 20 0 855980 59520 21892 S 0,0 1,0 0:00.13 evolution-+
2198 user 20 0 1436024 56464 45176 S 0,0 0,9 0:00.60 nautilus
2345 user 20 0 816180 50248 14124 S 0,0 0,8 0:00.06 evolution-+
2357 user 20 0 1062572 49860 13616 S 0,0 0,8 0:00.07 evolution-+
2029 user 20 0 666404 41568 34140 S 0,0 0,7 0:00.11 hud-service
2031 user 20 0 934532 40404 31536 S 0,0 0,7 0:00.21 unity-sett+
2486 user 20 0 658956 37628 30100 S 0,0 0,6 0:00.38 gnome-term+
2202 user 20 0 584176 36036 28812 S 0,0 0,6 0:00.08 nm-applet
2257 root 20 0 628896 33508 9920 S 0,0 0,5 0:00.46 fwupd
1992 user 20 0 472372 33348 26168 S 0,0 0,5 0:00.11 ibus-ui-gt+
2229 user 20 0 716624 33196 24440 S 0,0 0,5 0:00.04 goa-daemon
2046 user 20 0 562924 33192 27304 S 0,0 0,5 0:00.16 unity-pane+
1988 user 20 0 517532 27804 22356 S 0,0 0,5 0:00.19 bamfdaemon
3b) avec logiciel gourmand
alors là j'ai eu beaucoup de mal et donc j'ai pris qu'une seule fois les valeurs
top - 10:25:01 up 12 min, 1 user, load average: 12,00, 7,21, 3,15
Tâches: 258 total, 1 en cours, 257 en veille, 0 arrêté, 0 zombie
%Cpu(s): 5,7 ut, 3,0 sy, 0,0 ni, 40,6 id, 50,6 wa, 0,0 hi, 0,1 si, 0,0 st
KiB Mem : 6098268 total, 306124 libr, 5542048 util, 250096 tamp/cache
KiB Éch: 6287356 total, 4833676 libr, 1453680 util. 261200 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
2804 user 20 0 5570376 4,478g 1560 S 13,0 77,0 1:09.78 xds_par
2590 user 20 0 1229116 218964 28368 D 0,4 3,6 0:21.40 firefox
1062 mysql 20 0 1915596 159664 0 S 0,1 2,6 0:00.74 mysqld
2057 user 20 0 1284848 68588 46292 S 1,4 1,1 0:09.63 compiz
1031 root 20 0 265148 42032 32656 S 2,1 0,7 0:15.43 Xorg
2699 user 20 0 656920 17120 8228 S 0,2 0,3 0:02.88 gedit
2486 user 20 0 661828 14168 6208 S 0,7 0,2 0:02.34 gnome-terminal-
2198 user 20 0 1436024 11620 10004 S 0,0 0,2 0:00.77 nautilus
2206 user 20 0 1304752 11040 0 S 0,0 0,2 0:03.18 gnome-software
1018 postgres 20 0 294940 8504 8320 S 0,0 0,1 0:00.05 postgres
1017 postgres 20 0 291444 8392 8208 S 0,0 0,1 0:00.04 postgres
2046 user 20 0 564996 8348 4868 S 0,2 0,1 0:00.42 unity-panel-ser
2029 user 20 0 667716 5380 2880 S 0,2 0,1 0:00.20 hud-service
2564 user 20 0 516524 5356 0 S 0,0 0,1 0:00.09 update-notifier
1988 user 20 0 517996 5180 2544 S 0,1 0,1 0:00.49 bamfdaemon
1937 user 20 0 345700 4308 1056 S 0,0 0,1 0:01.42 ibus-daemon
2089 user 20 0 1234176 2936 2492 S 0,1 0,0 0:00.07 indicator-datet
2031 user 20 0 934532 2704 1744 S 0,0 0,0 0:00.27 unity-settings-
2769 user 20 0 23176 2164 16 S 0,0 0,0 0:00.02 bash
1110 postgres 20 0 294940 1772 1628 S 0,0 0,0 0:00.01 postgres
2803 user 20 0 42072 1628 1072 R 0,1 0,0 0:00.14 top
2237 root 20 0 368316 1624 744 S 0,0 0,0 0:00.27 udisksd
2419 user 20 0 576876 1468 0 S 0,0 0,0 0:00.05 zeitgeist-datah
1992 user 20 0 472372 1308 0 S 0,0 0,0 0:00.31 ibus-ui-gtk3
3c) après avoir killé la bestiole
top - 10:49:14 up 36 min, 1 user, load average: 0,36, 5,11, 9,48
Tâches: 256 total, 1 en cours, 255 en veille, 0 arrêté, 0 zombie
%Cpu(s): 1,8 ut, 0,4 sy, 0,0 ni, 97,3 id, 0,5 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem : 6098268 total, 5053596 libr, 728856 util, 315816 tamp/cache
KiB Éch: 6287356 total, 5301332 libr, 986024 util. 5072012 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
2590 user 20 0 1398216 284324 58052 S 0,3 4,7 0:31.33 firefox
2057 user 20 0 1330600 103916 64248 S 3,5 1,7 0:13.37 compiz
1062 mysql 20 0 1915596 71608 0 S 0,0 1,2 0:02.93 mysqld
1031 root 20 0 266696 36152 26344 S 3,7 0,6 0:18.51 Xorg
2699 user 20 0 656920 21216 13576 S 3,0 0,3 0:03.52 gedit
2206 user 20 0 1304752 15992 1320 S 0,0 0,3 0:03.34 gnome-software
2486 user 20 0 663000 15948 7312 S 0,2 0,3 0:03.07 gnome-terminal-
2046 user 20 0 564996 10900 7140 S 0,0 0,2 0:00.86 unity-panel-ser
2029 user 20 0 667716 10768 8272 S 0,1 0,2 0:00.23 hud-service
2198 user 20 0 1436024 9528 5728 S 0,0 0,2 0:00.78 nautilus
2031 user 20 0 934532 8732 6208 S 0,0 0,1 0:00.65 unity-settings-
1018 postgres 20 0 294940 8428 8244 S 0,0 0,1 0:00.08 postgres
1988 user 20 0 517996 8324 5152 S 0,1 0,1 0:00.58 bamfdaemon
2075 user 20 0 511320 8076 6412 S 0,0 0,1 0:00.09 pulseaudio
1992 user 20 0 472372 7540 6020 S 0,2 0,1 0:00.36 ibus-ui-gtk3
2564 user 20 0 516524 7516 2096 S 0,0 0,1 0:00.33 update-notifier
1017 postgres 20 0 291444 7484 7296 S 0,0 0,1 0:00.06 postgres
2097 user 20 0 642548 6436 5560 S 0,0 0,1 0:00.08 indicator-keybo
1937 user 20 0 345700 5888 2632 S 0,8 0,1 0:01.66 ibus-daemon
2098 user 20 0 737748 4648 3904 S 0,0 0,1 0:00.03 indicator-sound
2192 user 20 0 570312 4548 3928 S 0,0 0,1 0:00.05 unity-fallback-
942 root 20 0 278700 4180 3608 S 0,0 0,1 0:00.16 polkitd
2089 user 20 0 1234176 4048 3432 S 0,0 0,1 0:00.36 indicator-datet
2769 user 20 0 23176 3856 1536 S 0,0 0,1 0:00.02 bash
Hors ligne
#52 Le 18/07/2016, à 11:09
- certes
Re : Problème de lenteurs Ubuntu16.04
suite
1) retour à swapinness 60
echo vm.swappiness=60 | sudo tee -a /etc/sysctl.conf
vm.swappiness=60
2) redémarrage
3) vérification
cat /proc/sys/vm/swappiness
60
4) test top sans avoir ouvert de logiciel
top - 11:01:10 up 2 min, 1 user, load average: 2,59, 1,38, 0,54
Tâches: 270 total, 1 en cours, 269 en veille, 0 arrêté, 0 zombie
%Cpu(s): 1,0 ut, 0,3 sy, 0,0 ni, 73,8 id, 24,9 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem : 6098268 total, 4490780 libr, 789448 util, 818040 tamp/cache
KiB Éch: 6287356 total, 6287356 libr, 0 util. 4982644 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
2203 user 20 0 1374100 149468 69660 D 1,3 2,5 0:03.12 gnome-soft+
1022 mysql 20 0 1915596 140204 16056 S 0,0 2,3 0:00.25 mysqld
2027 user 20 0 1219412 113220 73468 S 0,0 1,9 0:01.37 compiz
1034 root 20 0 247748 72456 47080 S 3,3 1,2 0:01.92 Xorg
2193 user 20 0 1501808 64072 52596 S 0,0 1,1 0:00.61 nautilus
2169 user 20 0 855980 61596 21912 S 0,0 1,0 0:00.12 evolution-+
2324 user 20 0 881716 50096 13960 S 0,0 0,8 0:00.06 evolution-+
2336 user 20 0 1062572 49256 13148 S 0,0 0,8 0:00.06 evolution-+
2021 user 20 0 934540 43024 31944 S 0,0 0,7 0:00.22 unity-sett+
2494 user 20 0 658972 39764 30300 S 0,0 0,7 0:00.19 gnome-term+
2019 user 20 0 666504 39324 33984 S 0,0 0,6 0:00.12 hud-service
2263 root 20 0 628896 35560 9956 S 0,0 0,6 0:00.47 fwupd
2032 user 20 0 562968 35228 27328 S 0,0 0,6 0:00.16 unity-pane+
2194 user 20 0 657920 34376 29080 S 0,7 0,6 0:00.08 nm-applet
2166 user 20 0 716624 32808 24044 S 0,0 0,5 0:00.04 goa-daemon
1972 user 20 0 472368 31496 26380 S 0,0 0,5 0:00.09 ibus-ui-gt+
2062 user 20 0 577264 28724 21464 S 0,0 0,5 0:00.09 indicator-+
5) nettoyage swap
sudo swapoff -a && sudo swapon -a
6) retest top M
top - 11:04:50 up 6 min, 1 user, load average: 0,43, 0,87, 0,51
Tâches: 257 total, 1 en cours, 256 en veille, 0 arrêté, 0 zombie
%Cpu(s): 0,4 ut, 0,0 sy, 0,0 ni, 99,5 id, 0,2 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem : 6098268 total, 3848188 libr, 1268384 util, 981696 tamp/cache
KiB Éch: 6287356 total, 6287356 libr, 0 util. 4490928 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
2607 user 20 0 1362624 435420 106200 S 0,0 7,1 0:27.63 firefox
1022 mysql 20 0 1915596 260488 16056 S 0,0 4,3 0:00.35 mysqld
2027 user 20 0 1242300 129004 82748 S 0,0 2,1 0:07.78 compiz
2203 user 20 0 1304752 96592 25992 S 0,0 1,6 0:03.16 gnome-soft+
1034 root 20 0 263436 83916 57396 S 0,0 1,4 0:13.11 Xorg
2193 user 20 0 1501808 64072 52596 S 0,0 1,1 0:00.64 nautilus
2169 user 20 0 855980 61596 21912 S 0,0 1,0 0:00.12 evolution-+
2324 user 20 0 881716 50096 13960 S 0,0 0,8 0:00.06 evolution-+
2336 user 20 0 1062572 49256 13148 S 0,0 0,8 0:00.06 evolution-+
2021 user 20 0 934540 43004 31924 S 0,0 0,7 0:00.22 unity-sett+
2579 user 20 0 656412 41160 31644 S 0,0 0,7 0:01.49 gedit
2019 user 20 0 667164 40376 33988 S 0,0 0,7 0:00.15 hud-service
2494 user 20 0 659132 39968 30300 S 0,0 0,7 0:00.64 gnome-term+
2032 user 20 0 563764 36332 27328 S 0,0 0,6 0:00.22 unity-pane+
2263 root 20 0 628896 35560 9956 S 0,0 0,6 0:00.47 fwupd
2194 user 20 0 657920 34376 29080 S 0,0 0,6 0:00.08 nm-applet
2166 user 20 0 716624 32808 24044 S 0,0 0,5 0:00.04 goa-daemon
Hors ligne
#53 Le 18/07/2016, à 11:10
- certes
Re : Problème de lenteurs Ubuntu16.04
résultats de mon ami
il n'a aucun problème avec le même noyau et le même soft
Hors ligne
#54 Le 18/07/2016, à 11:27
- certes
Re : Problème de lenteurs Ubuntu16.04
Petite question supplémentaire:
On pense que le problème est apparu entre le 7 et le 8 juillet.
Cela peut il être utile d'une façon ou d'une autre pour identifier le problème?
y a t il un moyen d'avoir des informations sur ce qui s'est passé à ces dates ?
par exemple savoir les mises à jours de quoi ont été faites à cette date précise ou autres ??
merci
Hors ligne
#55 Le 18/07/2016, à 12:30
- moko138
Re : Problème de lenteurs Ubuntu16.04
En #36,
swappiness à 60,
tu utilisais 2,5 G de swap
3) 2ème prise de vue pendant qu'il tourne
KiB Mem : 6098268 total, 119716 libr, 5817692 util, 160860 tamp/cache KiB Éch: 6287356 total, 3743388 libr, 2543968 util. (...) PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM. 11359 user 20 0 6334992 5,066g 1524 D 7,9 87,1 1:16.25 xds_par
- -
Mais en #51
swappiness à 00, tu n'utilisais que 1,4 Go de swap :
3b) avec logiciel gourmand
KiB Mem : 6098268 total, 306124 libr, 5542048 util, 250096 tamp/cache KiB Éch: 6287356 total, 4833676 libr, 1453680 util. (...) PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM. 2804 user 20 0 5570376 4,478g 1560 S 13,0 77,0 1:09.78 xds_par
C'était donc moins lent.
Et pourtant tu as choisi de revenir à 60 ; c'est absurde.
---------------
En #36,
swappiness à 60,
tu utilisais déjà 1,1 G de swap, (vu par Rufus) :
1) avant de lancer le logiciel gourmand xds
KiB Éch: 6287356 total, 5099388 libr, 1187968 util. (...)
Mais en #51
swappiness à 00,
Tu n'utilises pas ta swap (heureusement) :
3a) au démarrage sans ouvrir aucun logiciel
KiB Mem : 6098268 total, 4415472 libr, 849604 util, 833192 tamp/cache KiB Éch: 6287356 total, 6287356 libr, 0 util. (...)
Et pourtant tu as choisi de revenir à 60 ; c'est absurde (bis).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#56 Le 18/07/2016, à 12:37
- Rufus T. Firefly
Re : Problème de lenteurs Ubuntu16.04
Et pourtant tu as choisi de revenir à 60 ; c'est absurde.
Mais non, ce n'est pas absurde : il vaut mieux annuler une manoeuvre qui ne règle pas le problème, puisque la cause ce n'est pas ça ! Parce qu'à force de bidouiller partout, on risque d'aggraver les choses, au total, ou en tous cas les compliquer, plutôt que les résoudre.
Regarde, il y a des posts où des gens signalent que leur ubuntu bouffe 1.6 Go ram au repos, ce qui est tout de même énorme ! Evidemment, comme ils s'occupent rarement de cristallographie, les choses en restent plus ou moins là... Mais qui sait ?
En revanche, si tu as une idée sur comment faire ceci, https://forum.ubuntu-fr.org/viewtopic.p … #p21555448, qui me semble une excellente initiative... Moi je ne sais pas : j'utilise Debian...
Dernière modification par Rufus T. Firefly (Le 18/07/2016, à 12:47)
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#57 Le 18/07/2016, à 12:49
- certes
Re : Problème de lenteurs Ubuntu16.04
C'était donc moins lent.
Et pourtant tu as choisi de revenir à 60 ; c'est absurde.
il vaut mieux annuler une manoeuvre qui ne règle pas le problème, puisque la cause ce n'est pas ça !
Je partage le sentiment de Rufus sur le fait que le problème ne vient pas de là
et améliorer une chouiette de performance ne me permet pas de réutiliser mon pc comme je le faisais jusque là ... je crois que si je n'avais pas su killer le job il serait encore en train de tourner ...
Mais si ce n'est pas ça l'origine du problème que puis je faire pour l'identifier ??
Hors ligne
#58 Le 18/07/2016, à 12:51
- moko138
Re : Problème de lenteurs Ubuntu16.04
3a) au démarrage sans ouvrir aucun logiciel
juste le terminaltop - 10:15:36 up 2 min, 1 user, Tâches: 270
270 tâches, 2 minutes après le démarrage !
À titre de comparaison, à l'instant, sur mon notebook à
RAM : 1,5 G
swap : 2 G
swappiness : 02
avec firefox (43 onglets), vlc (flux radio), wine, eog (visionneuse), thunar (4 onglets), éditeur de texte (7 onglets) et... démineur, je ne consomme pas de swap :
top (...) up 1 day, 7 min
Tasks: 166
KiB Mem: 1534052 total, 1470732 used, 63320 free, 35764 buffers
KiB Swap: 2101244 total, 0 used, (...)
Cent tâches de moins, et pourtant à pleine charge.
Donc tu devras aussi couper dans les machins (programmes, démons, services) lancés au démarrage.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#59 Le 18/07/2016, à 12:54
- moko138
Re : Problème de lenteurs Ubuntu16.04
Petite question supplémentaire:
On pense que le problème est apparu entre le 7 et le 8 juillet. (...)
y a t il un moyen d'avoir des informations sur ce qui s'est passé à ces dates ?
La liste des (dés)installations récentes se trouve dans /var/log/apt/history.log et dans /var/log/apt/history.log.1.gz.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#60 Le 18/07/2016, à 13:14
- certes
Re : Problème de lenteurs Ubuntu16.04
Yep
ci dessous ce que je trouve dans le fichier /var/log/apt/history.log
aux dates proches de quand ça a commencé à merdouiller
Start-Date: 2016-07-04 10:29:12
Commandline: aptdaemon role='role-commit-packages' sender=':1.324'
Upgrade: liboxideqt-qmlplugin:amd64 (1.15.7-0ubuntu0.16.04.1, 1.15.8-0ubuntu0.16.04.1), liboxideqtquick0:amd64 (1.15.7-0ubuntu0.16.04.1, 1.15.8-0ubuntu0.16.04.1), vim-common:amd64 (2:7.4.1689-3ubuntu1, 2:7.4.1689-3ubuntu1.1), liboxideqtcore0:amd64 (1.15.7-0ubuntu0.16.04.1, 1.15.8-0ubuntu0.16.04.1), ruby2.3:amd64 (2.3.0-5ubuntu1, 2.3.1-2~16.04), libruby2.3:amd64 (2.3.0-5ubuntu1, 2.3.1-2~16.04), oxideqt-codecs:amd64 (1.15.7-0ubuntu0.16.04.1, 1.15.8-0ubuntu0.16.04.1), vim-tiny:amd64 (2:7.4.1689-3ubuntu1, 2:7.4.1689-3ubuntu1.1)
End-Date: 2016-07-04 10:29:32
Start-Date: 2016-07-04 10:29:50
Commandline: aptdaemon role='role-commit-packages' sender=':1.324'
Upgrade: libappstream-glib8:amd64 (0.5.13-1, 0.5.13-1ubuntu2)
End-Date: 2016-07-04 10:29:53
Start-Date: 2016-07-08 16:19:26
Commandline: aptdaemon role='role-commit-packages' sender=':1.94'
Upgrade: suru-icon-theme:amd64 (14.04+16.04.20160415-0ubuntu2, 14.04+16.04.20160621-0ubuntu1), python3-software-properties:amd64 (0.96.20.1, 0.96.20.2), gimp-data:amd64 (2.8.16-1ubuntu1, 2.8.16-1ubuntu1.1), command-not-found-data:amd64 (0.3ubuntu16.04.1, 0.3ubuntu16.04.2), software-properties-gtk:amd64 (0.96.20.1, 0.96.20.2), libusbmuxd4:amd64 (1.0.10-2, 1.0.10-2ubuntu0.1), gimp:amd64 (2.8.16-1ubuntu1, 2.8.16-1ubuntu1.1), python3-commandnotfound:amd64 (0.3ubuntu16.04.1, 0.3ubuntu16.04.2), libimobiledevice6:amd64 (1.2.0+dfsg-3~ubuntu0.1, 1.2.0+dfsg-3~ubuntu0.2), ubuntu-mobile-icons:amd64 (14.04+16.04.20160415-0ubuntu2, 14.04+16.04.20160621-0ubuntu1), light-themes:amd64 (14.04+16.04.20160415-0ubuntu2, 14.04+16.04.20160621-0ubuntu1), bash:amd64 (4.3-14ubuntu1, 4.3-14ubuntu1.1), ubuntu-artwork:amd64 (1:14.04+16.04.20160415-0ubuntu2, 1:14.04+16.04.20160621-0ubuntu1), lsb-release:amd64 (9.20160110, 9.20160110ubuntu0.2), libgimp2.0:amd64 (2.8.16-1ubuntu1, 2.8.16-1ubuntu1.1), command-not-found:amd64 (0.3ubuntu16.04.1, 0.3ubuntu16.04.2), lsb-base:amd64 (9.20160110, 9.20160110ubuntu0.2), linux-firmware:amd64 (1.157.1, 1.157.2), ubuntu-mono:amd64 (14.04+16.04.20160415-0ubuntu2, 14.04+16.04.20160621-0ubuntu1), tzdata:amd64 (2016d-0ubuntu0.16.04, 2016f-0ubuntu0.16.04), software-properties-common:amd64 (0.96.20.1, 0.96.20.2)
End-Date: 2016-07-08 16:21:23
Start-Date: 2016-07-08 17:05:15
Commandline: apt install htop
Requested-By: cedric (1000)
Install: htop:amd64 (2.0.1-1)
End-Date: 2016-07-08 17:05:39
Start-Date: 2016-07-11 11:26:47
Commandline: apt install mesa-utils
Requested-By: cedric (1000)
Install: mesa-utils:amd64 (8.3.0-1)
End-Date: 2016-07-11 11:26:49
Hors ligne
#61 Le 18/07/2016, à 13:37
- certes
Re : Problème de lenteurs Ubuntu16.04
Donc tu devras aussi couper dans les machins (programmes, démons, services) lancés au démarrage.
yep
du coup j'ai installé bum
sudo apt-get install bum
sudo bum
j'ai déjà désactivé deux trois trucs mais sans que ça ne diminue fortement le nombre de service en cours
j'ai décoché
mysql
bluetooth
saned
smartmontools
il reste
dns-clean
uuidd
cgmanager
apache2
speech-dispatcher
osspd
irqbalance
atd
postgresql
thermald
whoopsie
kerneloops
cgproxy
avahi-daemon
cups-browsed
cups
Hors ligne
#62 Le 18/07/2016, à 14:19
- moko138
Re : Problème de lenteurs Ubuntu16.04
1) cups-browsed et cups ne me semblent guère utiles dès le démarrage.
(J'ai démarré Lubuntu 14.04 : elle tourne autour de 135-140 tâches - tout à l'heure, à 160, j'étais dans Xubuntu14.04).
2) Et si tu vires ce thème
Upgrade: suru-icon-theme:amd64
End-Date: 2016-07-08
au profit d'un des thèmes pré-installés (clearlooks ou autre), y a-t-il un mieux ?
Dernière modification par moko138 (Le 18/07/2016, à 14:21)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#63 Le 19/07/2016, à 12:38
- certes
Re : Problème de lenteurs Ubuntu16.04
yep
sorry
coupure de courant au boulot => pas possible de tester quoique ce soit
=> pas encore testé
Et si tu vires ce thème
Par ailleurs
en faisant un upgrade j'ai eu quelques message d'erreur
et en creusant dans différent poste
il était conseillé de vérifier les messages de chargement.
1) l'uprgade
sudo apt-get upgrade
les messages d'erreurs:
1ère partie
initctl: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée
insserv: warning: script 'binfmt-support' missing LSB tags and overrides
insserv: Default-Start undefined, assuming empty start runlevel(s) for script `binfmt-support'
insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `binfmt-support'
2ème partie
initctl: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée
insserv: warning: script 'binfmt-support' missing LSB tags and overrides
insserv: Default-Start undefined, assuming empty start runlevel(s) for script `binfmt-support'
insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `binfmt-support'
initctl: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée
insserv: warning: script 'binfmt-support' missing LSB tags and overrides
insserv: Default-Start undefined, assuming empty start runlevel(s) for script `binfmt-support'
insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `binfmt-support'
3ème partie
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
initctl: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée
insserv: warning: script 'binfmt-support' missing LSB tags and overrides
insserv: Default-Start undefined, assuming empty start runlevel(s) for script `binfmt-support'
insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `binfmt-support'
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
initctl: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée
insserv: warning: script 'binfmt-support' missing LSB tags and overrides
insserv: Default-Start undefined, assuming empty start runlevel(s) for script `binfmt-support'
insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `binfmt-support'
update-initramfs: deferring update (trigger activated)
initctl: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée
insserv: warning: script 'binfmt-support' missing LSB tags and overrides
insserv: Default-Start undefined, assuming empty start runlevel(s) for script `binfmt-support'
insserv: Default-Stop undefined, assuming empty stop runlevel(s) for script `binfmt-support'
2) upstart et initctl - les services
en me renseignement sur upstart j'ai vu dans ce post:
https://doc.ubuntu-fr.org/upstart
qu'il était possible de lister les services en cours => je la joins au cas ou ...
initctl list
indicator-application start/running, process 2493
upstart-udev-bridge start/running, process 2279
unicast-local-avahi stop/waiting
update-notifier-crash stop/waiting
xsession-init stop/waiting
update-notifier-hp-firmware stop/waiting
dbus start/running, process 2290
no-pinentry-gnome3 stop/waiting
update-notifier-cds stop/waiting
gnome-keyring-ssh stop/waiting
gnome-session (Unity) start/running, process 2427
ssh-agent stop/waiting
unity7 start/running, process 2430
upstart-dbus-session-bridge start/running, process 2340
gpg-agent start/running
indicator-messages start/running, process 2453
logrotate stop/waiting
indicator-bluetooth start/running, process 2454
unity-panel-service start/running, process 2432
hud start/running, process 2417
im-config start/running
notify-cgmanager stop/waiting
unity-gtk-module stop/waiting
session-migration stop/waiting
upstart-dbus-system-bridge start/running, process 2339
at-spi2-registryd start/running, process 2422
indicator-power start/running, process 2455
update-notifier-release stop/waiting
indicator-datetime start/running, process 2457
indicator-keyboard start/running, process 2464
unity-settings-daemon start/running, process 2419
indicator-sound start/running, process 2466
upstart-file-bridge start/running, process 2353
bamfdaemon start/running, process 2400
gnome-keyring stop/waiting
gnome-settings-daemon stop/waiting
window-stack-bridge start/running, process 2302
indicator-printers start/running, process 2467
re-exec stop/waiting
upstart-event-bridge stop/waiting
unity-panel-service-lockscreen stop/waiting
indicator-session start/running, process 2472
4) initctl - failed to connect et journalctl
ensuite suivant le message d'erreur
initctl: Impossible de se connecter à Upstart: Failed to connect to socket /com/ubuntu/upstart: Connexion refusée
j'ai vu ce poste
https://ubuntuforums.org/showthread.php?t=2276436
To get the full booting process detail, run journalctl, and glance at red lines (if you have some gui), otherwise use systemctl
maybe you need to update some script https://wiki.ubuntu.com/SystemdForUpstartUsers
usefull howto http://linux-vserver.org/Upstart_issues
=> j'ai lancé la commande
journalctl
et plusieurs erreurs sont répertoriées
jui 19 09:38:49 pc01 kernel: sd 0:0:0:0: [sda] No Caching mode page found
jui 19 09:38:49 pc01 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
plus loin
jui 19 09:38:52 pc01 nvidia-persistenced[365]: Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvid
jui 19 09:38:52 pc01 nvidia-persistenced[365]: The daemon no longer has permission to remove its runtime data directory /var/run/nvi
jui 19 09:38:52 pc01 nvidia-persistenced[365]: Shutdown (365)
celui la me semble bizarre vu que la carte graphique semble être ok (driver mis à jour il y a très peu de temps, ...)
plus loin
jui 19 09:38:54 pc01 systemd-udevd[349]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0x150, key code 1
j
plus loin
jui 19 09:39:06 pc01 smartd[755]: Device: /dev/sdf [SAT], 29 Currently unreadable (pending) sectors
jui 19 09:39:06 pc01 smartd[755]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
jui 19 09:39:06 pc01 systemd[1]: Started System Logging Service.
jui 19 09:39:07 pc01 ntpdate[971]: Can't find host ntp.ubuntu.com: Name or service not known (-2)
jui 19 09:39:07 pc01 ntpdate[971]: no servers can be used, exiting
plus loin
jui 19 09:39:12 pc01 smartd[755]: Warning via /usr/share/smartmontools/smartd-runner to root produced unexpected output (197 bytes)
jui 19 09:39:12 pc01 smartd[755]: /etc/smartmontools/run.d/10mail:
jui 19 09:39:12 pc01 smartd[755]: mail: impossible d'expédier le message : Processus terminé avec un état de sortie non nul
jui 19 09:39:12 pc01 smartd[755]: run-parts: /etc/smartmontools/run.d/10mail exited with return code 36
jui 19 09:39:12 pc01 smartd[755]: Warning via /usr/share/smartmontools/smartd-runner to root: failed (32-bit/8-bit exit status: 256/
jui 19 09:39:12 pc01 smartd[755]: Device: /dev/sdf [SAT], 29 Offline uncorrectable sectors
plus loin
jui 19 09:39:13 pc01 NetworkManager[804]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed
plus loin
jui 19 09:39:19 pc01 systemd[1]: Failed to start Automatically refresh installed snaps.
plus loin
jui 19 09:39:32 pc01 lightdm[1695]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object fi
jui 19 09:39:32 pc01 lightdm[1695]: PAM adding faulty module: pam_kwallet.so
jui 19 09:39:32 pc01 lightdm[1695]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object
jui 19 09:39:32 pc01 lightdm[1695]: PAM adding faulty module: pam_kwallet5.so
plus loin
jui 19 09:39:35 pc01 colord-sane[1108]: io/hpmud/pp.c 627: unable to read device-id ret=-1
jui 19 09:39:38 pc01 lightdm[1964]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object fi
jui 19 09:39:38 pc01 lightdm[1964]: PAM adding faulty module: pam_kwallet.so
jui 19 09:39:38 pc01 lightdm[1964]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object
jui 19 09:39:38 pc01 lightdm[1964]: PAM adding faulty module: pam_kwallet5.so
plus loin
jui 19 09:41:04 pc01 pkexec[3029]: pam_ck_connector(polkit-1:session): cannot determine display-device
plus loin
jui 19 10:09:13 pc01 smartd[755]: Device: /dev/sdf [SAT], 29 Currently unreadable (pending) sectors
jui 19 10:09:13 pc01 smartd[755]: Device: /dev/sdf [SAT], 29 Offline uncorrectable sectors
oups ça à l'air d'être le bord....
Hors ligne
#64 Le 19/07/2016, à 13:05
- Rufus T. Firefly
Re : Problème de lenteurs Ubuntu16.04
upstart
Si ça se trouve, il y a encore simultanément du system V, du upstart et du systemd... Du bricolage, quoi... Comme d'habitude chez canonical... pourvu que ça sorte en temps et en heure... Et puis, parfois, ça finit par déconner... De quelle manière ? Ben ça...
En revanche, ça "Device: /dev/sdf [SAT], 29 Currently unreadable (pending) sectors", c'est inquiétant. Je ne sais pas qui est sdf, mais il se peut bien que le disque en question manifeste quelques signes de faiblesse. A contrôler rapidement ! Mais ce n'est pas ça l'origine de ton problème de ram...
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#65 Le 19/07/2016, à 13:21
- certes
Re : Problème de lenteurs Ubuntu16.04
yep à ce stade
j'ai viré deux trois trucs
sudo apt-get remove smartmontools
sudo apt-get remove pulseaudio
sudo apt-get remove suru-icon-theme
sudo apt-get autoremove
sudo apt-get remove --purge mysql-server mysql-common phpmyadmin
Hors ligne
#66 Le 19/07/2016, à 13:48
- Rufus T. Firefly
Re : Problème de lenteurs Ubuntu16.04
sudo apt-get remove smartmontools
Ça ce n'est pas une bonne idée, du moins avant d'avoir vérifié ce qu'il en est avec sdf...
sudo smartctl -a /dev/sdf
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#67 Le 19/07/2016, à 13:51
- certes
Re : Problème de lenteurs Ubuntu16.04
bilan top à ce stade
he be
ça va mieux
ça alors ...
c'est pas encore top top
mais mieux
nettement mieux
j'ai pu suivre le job avec top ouvrir firefox me connecter à une page web
puis à nouveau plus rien moyen de faire
ensuite de nouveau ok ....
quelques top pour voir l'évolution
le logiciel gourmand tourne
1ère partie au début
top - 13:26:23 up 4 min, 1 user, load average: 1,44, 1,08, 0,51
Tâches: 275 total, 3 en cours, 272 en veille, 0 arrêté, 0 zombie
%Cpu(s): 71,2 ut, 6,1 sy, 0,0 ni, 4,0 id, 18,4 wa, 0,0 hi, 0,3 si, 0,0 st
KiB Mem : 6098268 total, 1043036 libr, 3875116 util, 1180116 tamp/cache
KiB Éch: 6287356 total, 6287356 libr, 0 util. 1903344 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
4452 user 20 0 5780196 3,000g 4024 S 221,3 51,6 0:36.91 xds_par
3903 user 20 0 1246740 131492 84412 S 0,4 2,2 0:04.38 compiz
3993 user 20 0 1304564 94004 25696 S 0,0 1,5 0:03.13 gnome-soft+
2876 root 20 0 253180 67036 40384 S 0,7 1,1 0:06.47 Xorg
2) pendant le process (j'en met plusieurs)
top - 13:26:47 up 4 min, 1 user, load average: 2,32, 1,31, 0,60
Tâches: 273 total, 2 en cours, 271 en veille, 0 arrêté, 0 zombie
%Cpu(s):100,0 ut, 0,0 sy, 0,0 ni, 0,0 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem : 6098268 total, 674796 libr, 4888184 util, 535288 tamp/cache
KiB Éch: 6287356 total, 6282008 libr, 5348 util. 899104 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
4452 user 20 0 5675204 4,005g 4348 R 398,7 68,9 2:02.44 xds_par
3903 user 20 0 1246740 127612 80532 S 0,0 2,1 0:04.62 compiz
3993 user 20 0 1304564 93204 24896 S 0,0 1,5 0:03.13 gnome-soft+
2876 root 20 0 253180 62456 35804 S 0,3 1,0 0:06.87 Xorg
top - 13:28:11 up 6 min, 1 user, load average: 1,67, 1,24, 0,63
Tâches: 258 total, 2 en cours, 256 en veille, 0 arrêté, 0 zombie
%Cpu(s): 79,1 ut, 7,3 sy, 0,0 ni, 2,3 id, 11,0 wa, 0,0 hi, 0,4 si, 0,0 st
KiB Mem : 6098268 total, 603076 libr, 4609220 util, 885972 tamp/cache
KiB Éch: 6287356 total, 6282012 libr, 5344 util. 1178016 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
4675 user 20 0 5780200 3,645g 4120 S 245,1 62,7 0:44.88 xds_par
3903 user 20 0 1246740 128636 80936 S 2,0 2,1 0:06.98 compiz
4861 user 20 0 141500 99084 5936 D 1,6 1,6 0:00.19 H5ToXds
3993 user 20 0 1304564 93204 24896 S 0,0 1,5 0:03.13 gnome-soft+
2876 root 20 0 253180 62456 35804 S 2,5 1,0 0:09.88 Xorg
top - 13:29:51 up 7 min, 1 user, load average: 7,61, 3,38, 1,46
Tâches: 250 total, 1 en cours, 249 en veille, 0 arrêté, 0 zombie
%Cpu(s): 2,2 ut, 1,0 sy, 0,0 ni, 27,8 id, 69,0 wa, 0,0 hi, 0,1 si, 0,0 st
KiB Mem : 6098268 total, 117392 libr, 5758244 util, 222632 tamp/cache
KiB Éch: 6287356 total, 4779012 libr, 1508344 util. 68088 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
4675 user 20 0 6336364 5,205g 1572 D 8,7 89,5 1:16.78 xds_par
3903 user 20 0 1246740 49032 36276 S 0,0 0,8 0:07.32 compiz
2876 root 20 0 253180 33092 21312 S 0,6 0,5 0:10.83 Xorg
top - 13:34:45 up 12 min, 1 user, load average: 5,79, 4,48, 2,47
Tâches: 255 total, 2 en cours, 253 en veille, 0 arrêté, 0 zombie
%Cpu(s): 45,1 ut, 8,3 sy, 0,0 ni, 8,4 id, 37,9 wa, 0,0 hi, 0,3 si, 0,0 st
KiB Mem : 6098268 total, 323964 libr, 5413276 util, 361028 tamp/cache
KiB Éch: 6287356 total, 4094904 libr, 2192452 util. 396920 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
4675 user 20 0 5692892 4,628g 2148 S 145,3 79,6 3:40.29 xds_par
5012 user 20 0 961628 212096 43748 S 1,8 3,5 0:04.77 firefox
3903 user 20 0 1254868 62432 45828 S 0,9 1,0 0:13.22 compiz
5204 user 20 0 105932 51404 5900 D 0,6 0,8 0:00.08 H5ToXds
5206 user 20 0 62064 47452 5836 R 0,5 0,8 0:00.06 H5ToXds
2876 root 20 0 262084 39544 27328 S 1,1 0,6 0:17.21 Xorg
3) process killed
top - 13:46:10 up 24 min, 1 user, load average: 0,28, 3,21, 3,42
Tâches: 249 total, 1 en cours, 248 en veille, 0 arrêté, 0 zombie
%Cpu(s): 1,2 ut, 0,3 sy, 0,0 ni, 98,2 id, 0,2 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem : 6098268 total, 5351492 libr, 423724 util, 323052 tamp/cache
KiB Éch: 6287356 total, 5712940 libr, 574416 util. 5394968 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
5012 user 20 0 1105712 188684 56324 S 0,2 3,1 0:15.16 firefox
3903 user 20 0 1293184 100908 42640 S 3,5 1,7 0:20.33 compiz
2876 root 20 0 262632 34332 21628 S 3,3 0,6 0:29.13 Xorg
Hors ligne
#68 Le 19/07/2016, à 13:53
- certes
Re : Problème de lenteurs Ubuntu16.04
Ça ce n'est pas une bonne idée
oups
je dois le remettre ??
pourquoi n'est ce pas une bonne idée
je l'ai installé il n'y a pas très longtemps
Hors ligne
#69 Le 19/07/2016, à 13:58
- certes
Re : Problème de lenteurs Ubuntu16.04
sorry je n'avais pas vu ton message avec sdf
merci
Hors ligne
#70 Le 19/07/2016, à 14:59
- moko138
Re : Problème de lenteurs Ubuntu16.04
Vu ceci :
jui 19 09:39:06 pc01 smartd[755]: Device: /dev/sdf [SAT], 29 Currently unreadable (pending) sectors
jui 19 09:39:12 pc01 smartd[755]: Device: /dev/sdf [SAT], 29 Offline uncorrectable sectors
c'est sûr que tu vas avoir besoin de smartmontools ! Tu peux le réinstaller en ligne de commande (c'est plus léger) par
sudo apt-get install --no-install-recommends smartmontools
Ensuite, outre la commande de Rufus de 13h48, ou cette variante :
sudo smartctl -s on -a /dev/sdf
peux tu nous donner
cat /etc/fstab
et
sudo parted -l
s'il te plaît ?
(En espérant que la lettre "f" soit toujours attribuée au même disque qu'au moment du log... Si tu n'as pas démonté sdf, et si tu n'as pas redémarré, on est tranquilles )
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#71 Le 19/07/2016, à 15:29
- certes
Re : Problème de lenteurs Ubuntu16.04
yep
entretemps j'avais commencé deux trois trucs
je vous envoie ce que j'ai fait et compléterai ce que Moko138 demande dans un prochain message
j'ai comme l'impression qu'il s'agit du disque dur sur lequel linux se trouve (oups ...)
sudo lshw -businfo
donne entre autres
scsi@2:0.0.0 /dev/sdf disk 1TB ST31000524AS
scsi@2:0.0.0,1 /dev/sdf1 volume 925GiB Volume EXT4
scsi@2:0.0.0,2 /dev/sdf2 volume 6140MiB Extended partition
/dev/sdf5 volume 6140MiB Linux swap / Solaris partition
j'ai réinstallé smartmontools
et tapé la commande
sudo smartctl -a /dev/sdf
ce qui donne
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000524AS
Serial Number: 5VPATG0H
LU WWN Device Id: 5 000c50 04a207806
Firmware Version: JC4A
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jul 19 15:24:58 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 179) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 097 006 Pre-fail Always - 108905697
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 83
5 Reallocated_Sector_Ct 0x0033 084 084 036 Pre-fail Always - 682
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 100154478
9 Power_On_Hours 0x0032 062 062 000 Old_age Always - 33696
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 83
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 094 094 000 Old_age Always - 6
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 058 045 Old_age Always - 37 (Min/Max 27/38)
194 Temperature_Celsius 0x0022 037 042 000 Old_age Always - 37 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 043 012 000 Old_age Always - 108905697
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 29
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 29
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 33921 (16 112 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2282250841
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1156827630
SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 30084 hours (1253 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 e8 ff ff ff 4f 00 34d+06:43:50.898 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 34d+06:43:50.876 WRITE FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+06:43:50.870 READ FPDMA QUEUED
61 00 10 ff ff ff 4f 00 34d+06:43:50.870 WRITE FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+06:43:50.870 READ FPDMA QUEUED
Error 5 occurred at disk power-on lifetime: 29198 hours (1216 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.242 READ FPDMA QUEUED
Error 4 occurred at disk power-on lifetime: 29191 hours (1216 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+00:27:32.638 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.624 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.624 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.624 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.623 READ FPDMA QUEUED
Error 3 occurred at disk power-on lifetime: 29187 hours (1216 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 11d+20:06:15.316 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.316 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.053 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.052 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.052 READ FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 29160 hours (1215 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 05 bb a7 09 Error: UNC at LBA = 0x09a7bb05 = 161987333
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 f0 ab a7 49 00 10d+17:30:53.262 READ FPDMA QUEUED
60 00 00 f0 aa a7 49 00 10d+17:30:53.261 READ FPDMA QUEUED
60 00 00 f0 a8 a7 49 00 10d+17:30:53.259 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 10d+17:30:53.220 FLUSH CACHE EXT
61 00 10 ff ff ff 4f 00 10d+17:30:53.148 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hors ligne
#72 Le 19/07/2016, à 15:30
- certes
Re : Problème de lenteurs Ubuntu16.04
yep voici la suite
la commande
sudo smartctl -s on -a /dev/sdf
donne
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000524AS
Serial Number: 5VPATG0H
LU WWN Device Id: 5 000c50 04a207806
Firmware Version: JC4A
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jul 19 15:30:28 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 179) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 097 006 Pre-fail Always - 108938947
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 83
5 Reallocated_Sector_Ct 0x0033 084 084 036 Pre-fail Always - 682
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 100154987
9 Power_On_Hours 0x0032 062 062 000 Old_age Always - 33696
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 83
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 094 094 000 Old_age Always - 6
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 058 045 Old_age Always - 37 (Min/Max 27/38)
194 Temperature_Celsius 0x0022 037 042 000 Old_age Always - 37 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 042 012 000 Old_age Always - 108938947
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 29
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 29
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 33921 (26 152 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2282283801
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1156828088
SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 30084 hours (1253 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 e8 ff ff ff 4f 00 34d+06:43:50.898 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 34d+06:43:50.876 WRITE FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+06:43:50.870 READ FPDMA QUEUED
61 00 10 ff ff ff 4f 00 34d+06:43:50.870 WRITE FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+06:43:50.870 READ FPDMA QUEUED
Error 5 occurred at disk power-on lifetime: 29198 hours (1216 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+07:03:26.242 READ FPDMA QUEUED
Error 4 occurred at disk power-on lifetime: 29191 hours (1216 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+00:27:32.638 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.624 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.624 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.624 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+00:27:32.623 READ FPDMA QUEUED
Error 3 occurred at disk power-on lifetime: 29187 hours (1216 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 11d+20:06:15.316 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.316 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.053 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.052 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11d+20:06:15.052 READ FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 29160 hours (1215 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 05 bb a7 09 Error: UNC at LBA = 0x09a7bb05 = 161987333
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 f0 ab a7 49 00 10d+17:30:53.262 READ FPDMA QUEUED
60 00 00 f0 aa a7 49 00 10d+17:30:53.261 READ FPDMA QUEUED
60 00 00 f0 a8 a7 49 00 10d+17:30:53.259 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 10d+17:30:53.220 FLUSH CACHE EXT
61 00 10 ff ff ff 4f 00 10d+17:30:53.148 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hors ligne
#73 Le 19/07/2016, à 15:33
- certes
Re : Problème de lenteurs Ubuntu16.04
la suite
cat /etc/fstab
donne
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
#Entry for /dev/sda1 :
UUID=578eb808-5f2d-4d34-b72c-9604073dd5d8 / ext4 errors=remount-ro 0 1
#Entry for /dev/sdb1 :
UUID=f2d0ef37-8598-46f8-bd03-22cf1ecd03b7 /media/sdb1 ext4 defaults 0 0
#Entry for /dev/sdc1 :
UUID=8CB4-A035 /media/cedric/LACIE vfat defaults,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2 0 2
#Entry for /dev/sda5 :
UUID=fbe703d6-0dc1-4a2a-a6fd-9984e51558f4 none swap sw 0 0
et la commande
sudo parted -l
donne
Modèle: LaCie d2 Quadra v3 (scsi)
Disque /dev/sde : 1000GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Disk Flags:
Numéro Début Fin Taille Type Système de fichiers Fanions
1 32,3kB 518MB 518MB primary fat32
2 518MB 1000GB 1000GB primary ntfs
Modèle: ATA ST31000524AS (scsi)
Disque /dev/sdf : 1000GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Disk Flags:
Numéro Début Fin Taille Type Système de fichiers Fanions
1 1049kB 994GB 994GB primary ext4 démarrage
2 994GB 1000GB 6438MB extended
5 994GB 1000GB 6438MB logical linux-swap(v1)
Modèle: ATA ST31000524AS (scsi)
Disque /dev/sdg : 1000GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Disk Flags:
Numéro Début Fin Taille Type Système de fichiers Fanions
1 4194kB 1000GB 1000GB primary ext4
merci
Hors ligne
#74 Le 19/07/2016, à 16:14
- Rufus T. Firefly
Re : Problème de lenteurs Ubuntu16.04
5 Reallocated_Sector_Ct 0x0033 084 084 036 Pre-fail Always - 682
Fais le plus rapidement possibles des sauvegardes des trucs précieux !
Ce disque peut être considéré comme potentiellement mort !!! Et ça peut arriver d'un moment à l'autre...
Edit : et je révise mon jugement. Tes autres problèmes pourraient venir de là (je ne pensais pas que ton disque gnu/linux pouvait se trouver reconnu comme sdf, puisque d'habitude ça commence par sda, sdb, etc.)...
Dernière modification par Rufus T. Firefly (Le 19/07/2016, à 16:43)
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#75 Le 19/07/2016, à 20:10
- certes
Re : Problème de lenteurs Ubuntu16.04
Un tout tout grand merci pour votre aide !!
j'ai lancé le backup (je pense de toute façon préférable d'en faire un ... vu les conditions)
Cependant, je dois être fatigué mais je ne comprend plus rien ...
dans mon fstab
le système est en sda1
mais
sudo lshw -businfo
donne
scsi@1:0.0.0 /dev/sda disk SCSI Disk
scsi@1:0.0.1 /dev/sdb disk SCSI Disk
scsi@1:0.0.2 /dev/sdc disk SCSI Disk
scsi@1:0.0.3 /dev/sdd disk SCSI Disk
ce qui n'est pas super nourris en détail
et plus loin
scsi@2:0.0.0 /dev/sdf disk 1TB ST31000524AS
scsi@2:0.0.0,1 /dev/sdf1 volume 925GiB Volume EXT4
scsi@2:0.0.0,2 /dev/sdf2 volume 6140MiB Extended partition
/dev/sdf5 volume 6140MiB Linux swap / Solaris partition
et la commande
sudo lshw
donne
*-disk:0
description: SCSI Disk
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/sda
configuration: logicalsectorsize=512 sectorsize=512
*-disk:1
description: SCSI Disk
identifiant matériel: 0.0.1
information bus: scsi@1:0.0.1
nom logique: /dev/sdb
configuration: logicalsectorsize=512 sectorsize=512
*-disk:2
description: SCSI Disk
identifiant matériel: 0.0.2
information bus: scsi@1:0.0.2
nom logique: /dev/sdc
configuration: logicalsectorsize=512 sectorsize=512
*-disk:3
description: SCSI Disk
identifiant matériel: 0.0.3
information bus: scsi@1:0.0.3
nom logique: /dev/sdd
configuration: logicalsectorsize=512 sectorsize=512
et plus loin
*-disk
description: ATA Disk
produit: ST31000524AS
fabriquant: Seagate
identifiant matériel: 0.0.0
information bus: scsi@2:0.0.0
nom logique: /dev/sdf
version: JC4A
numéro de série: 5VPATG0H
taille: 931GiB (1TB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=00087f22
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@2:0.0.0,1
nom logique: /dev/sdf1
nom logique: /
version: 1.0
numéro de série: 578eb808-5f2d-4d34-b72c-9604073dd5d8
taille: 925GiB
capacité: 925GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2013-03-14 15:50:24 filesystem=ext4 lastmountpoint=/ modified=2016-07-19 13:22:06 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2016-07-19 13:22:16 state=mounted
*-volume:1
description: Extended partition
identifiant matériel: 2
information bus: scsi@2:0.0.0,2
nom logique: /dev/sdf2
taille: 6140MiB
capacité: 6140MiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
identifiant matériel: 5
nom logique: /dev/sdf5
capacité: 6140MiB
fonctionnalités: nofs
Au final que faut il penser ??
Encore merci de votre aide
et désolé de ces dernières questions ...
Hors ligne