Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#26 Le 08/02/2016, à 19:49

Rufus T. Firefly

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Ça correspond, entre autres, à l'inventaire des partitions du disque. Ce qui est normal... Parfois, chez moi, il y a même un message genre ATA est lent à répondre (un truc comme ça). Mais comme j'ai aussi, depuis longtemps, 3 secteurs ré-alloués sur le disque, je me dis que ce disque n'est pas tout-à-fait sain, un peu poussif au démarrage... Je ne sais pas trop. Le fait est que ça traîne un peu, mais que ça finit par démarrer...

Pour la wifi, il faut commencer par regarder ce que c'est comme puce... Avec lspci, par exemple.

Dernière modification par Rufus T. Firefly (Le 08/02/2016, à 19:56)

La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#27 Le 09/02/2016, à 18:53

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

bonjour
et bien cela a l'air de marcher ,bien qu'au demarrage j'ai de en temps le blocage sur la ligne "waiting for /dev to be fully populated" 
je redemarre et cela passe ???????
pour le wifi cela a été plus simple ,merci


-pour rufus tu dis :"Je te suggère d'essayer Debian wheezy (7.9.0), 32 bits, lxde ou à la rigueur xfce (un peu plus lourd) qui présente l'insigne avantage d'avoir encore un serveur graphique 1.12 et le driver nvidia adéquat dans ses dépôts non-free, si necessaire"
me conseille tu d'installer ce "driver nvidia des depots non free" ou dans mon cas si cela marche de laisser ainsi ?
et si oui comment faire ?
merci encore

Hors ligne

#28 Le 10/02/2016, à 00:10

Rufus T. Firefly

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Ce n'est pas la peine si ça fonctionne sans...

La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#29 Le 11/02/2016, à 09:34

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

bonjour
je crois que je vais etre elu boulet de la semaine
comme je suis en congé cette semaine (pour refaire des travaux a la maison ) je redemarre tous les matins ma "petoire " de compaq pour valider sa fiabilite ;
et la au bout de trois jours les demarrages sont de plus en plus difficile ; ce matin apres deux demarrages avortes : bloques sur la ligne "Waiting for /dev to be fully populated. "je redemarre en recovery    ;=(
je regardes un peu sur les forum pour la fameuse ligne :"Waiting for /dev to be fully populated.
je fais un lspci -n qui donne ceci :

alexandre@debian:~$ lspci -n
00:00.0 0600: 10de:00d1 (rev a4)
00:01.0 0601: 10de:00d0 (rev a6)
00:01.1 0c05: 10de:00d4 (rev a4)
00:02.0 0c03: 10de:00d7 (rev a5)
00:02.1 0c03: 10de:00d7 (rev a5)
00:02.2 0c03: 10de:00d8 (rev a2)
00:06.0 0401: 10de:00da (rev a2)
00:06.1 0703: 10de:00d9 (rev a2)
00:08.0 0101: 10de:00d5 (rev a5)
00:0a.0 0604: 10de:00dd (rev a2)
00:0b.0 0604: 10de:00d2 (rev a4)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 10de:0179 (rev a3)
02:00.0 0c00: 104c:8026
02:01.0 0200: 10ec:8139 (rev 10)
02:02.0 0280: 14e4:4320 (rev 03)
02:04.0 0607: 104c:ac54 (rev 01)
02:04.1 0607: 104c:ac54 (rev 01)
02:04.2 0880: 104c:8201 (rev 01)

et la je vais sur un site de diagnostique :  http://kmuto.jp/debian/hcl/Compaq/Presario+R3000   

mais la je suis un peu dubitatif !!! si quelqu'un peut m'aider a dechiffrer ...

et suite a ma question posée :
-pour rufus tu dis :"Je te suggère d'essayer Debian wheezy (7.9.0), 32 bits, lxde ou à la rigueur xfce (un peu plus lourd) qui présente l'insigne avantage d'avoir encore un serveur graphique 1.12 et le driver nvidia adéquat dans ses dépôts non-free, si necessaire"
me conseille tu d'installer ce "driver nvidia des depots non free" ou dans mon cas si cela marche de laisser ainsi ?
et si oui comment faire ?
merci encore
reponse  :  Rufus T. Firefly Le 09/02/2016, à 23:10
                           Ce n'est pas la peine si ça fonctionne sans...

beh la je crois que cela marche pas top
merci de votre aide et patience et moi je retourne a ma peinture en attendant   :=)


Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 11/02/2016, à 19:46)

Hors ligne

#30 Le 11/02/2016, à 11:15

Bougron

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Bonjour

Au besoin , avec une live-usb refais ma demande du post#5.    Cela permettra de voir s'il y a eu des dégradations par rapport a cette référence.
et postes de nouveau le résultat de 

sudo smartctl -s on -a /dev/sda

Hors ligne

#31 Le 11/02/2016, à 13:21

Rufus T. Firefly

Re : demarrage difficile et aleatoire quelque soit la distribution installé

ralain33 a écrit :

beh la je crois que cela marche pas top

Oui, mais ça n'a rien à voir avec le driver vidéo, puisque l'affichage est bon, quand ça passe ce cap... Un problème de driver vidéo, c'est un écran noir, parfois bariolé, et souvent l'ordinateur complètement figé...
Si tu arrives à le faire démarrer renvoie le résultat de ça :

dmesg

Mais de grâce, entre balises code (le <> bleu juste au-dessus de la fenêtre de saisie des messages, dans la ligne de mise en forme)

Dernière modification par Rufus T. Firefly (Le 11/02/2016, à 13:23)

La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#32 Le 11/02/2016, à 14:31

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

re bonjour
pour rufus (pendant ma pose peinture ) j'ai redemarre a la deuxieme tentative sans mode recovery et j'ai fait dmesg que je te joint :

alexandre@debian:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[    0.000000]  BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Hewlett-Packard  Presario R3200 (PJ851EA#ABF)  /08A0, BIOS F.35 04/28/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1ff70 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-D3FFF write-back
[    0.000000]   D4000-D4FFF write-protect
[    0.000000]   D5000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFE0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-000000001ff70000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 001fe00000 page 2M
[    0.000000]  001fe00000 - 001ff70000 page 4k
[    0.000000] kernel direct mapping tables up to 1ff70000 @ 19f9000-1a00000
[    0.000000] RAMDISK: 1eb21000 - 1f485000
[    0.000000] ACPI: RSDP 000f7240 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 1ff7a89f 00034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 1ff7ee34 00074 (v01 NVIDIA CK8      06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 1ff7a8d3 04561 (v01 NVIDIA      CK8 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 1ff7ffc0 00040
[    0.000000] ACPI: APIC 1ff7eea8 0005A (v01 NVIDIA NV_APIC_ 06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 1ff7ef02 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 1ff7ef2a 000D6 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ff70000
[    0.000000]   low ram: 0 - 1ff70000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001ff70
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001ff70
[    0.000000] On node 0 totalpages: 130815
[    0.000000] free_area_init_node: node 0, pgdat c1414800, node_mem_map dfb6f200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125841 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @dfb5d000 s33344 r0 d24000 u57344
[    0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=42d631d0-4f55-43f6-b7a8-8c4e2eca7cea ro quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 503820k/523712k available (2860k kernel code, 19440k reserved, 1348k data, 424k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xe0770000 - 0xff9fe000   ( 498 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
[    0.000000]       .init : 0xc141d000 - 0xc1487000   ( 424 kB)
[    0.000000]       .data : 0xc12cb100 - 0xc141c200   (1348 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12cb100   (2860 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=de406000 soft=de408000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1596.088 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.17 BogoMIPS (lpj=6384352)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004070] Security Framework initialized
[    0.004078] AppArmor: AppArmor disabled by boot time parameter
[    0.004100] Mount-cache hash table entries: 512
[    0.004276] Initializing cgroup subsys cpuacct
[    0.004284] Initializing cgroup subsys memory
[    0.004298] Initializing cgroup subsys devices
[    0.004301] Initializing cgroup subsys freezer
[    0.004305] Initializing cgroup subsys net_cls
[    0.004309] Initializing cgroup subsys blkio
[    0.004320] Initializing cgroup subsys perf_event
[    0.004359] mce: CPU supports 5 MCE banks
[    0.004455] SMP alternatives: switching to UP code
[    0.008742] Freeing SMP alternatives: 8k freed
[    0.008750] ACPI: Core revision 20110623
[    0.012087] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.016152] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.055846] CPU0: AMD Athlon(tm) XP Processor 3000+ stepping 00
[    0.056003] Performance Events: AMD PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              48
[    0.056003] ... generic registers:      4
[    0.056003] ... value mask:             0000ffffffffffff
[    0.056003] ... max period:             00007fffffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000000000f
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Brought up 1 CPUs
[    0.056003] Total of 1 processors activated (3192.17 BogoMIPS).
[    0.056003] devtmpfs: initialized
[    0.056003] PM: Registering ACPI NVS region at 1ff7f000 (4096 bytes)
[    0.056003] print_constraints: dummy: 
[    0.056003] NET: Registered protocol family 16
[    0.056003] node 0 link 0: io port [1000, fffff]
[    0.056003] TOM: 0000000020000000 aka 512M
[    0.056003] node 0 link 0: mmio [a0000, bffff]
[    0.056003] node 0 link 0: mmio [20000000, fe0bffff]
[    0.056003] bus: [00, ff] on node 0 link 0
[    0.056003] bus: 00 index 0 [io  0x0000-0xffff]
[    0.056003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.056003] bus: 00 index 2 [mem 0x20000000-0xfcffffffff]
[    0.056003] ACPI: bus type pci registered
[    0.056003] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[    0.056003] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2
[    0.056003] PCI: Using configuration type 1 for base access
[    0.056003] bio: create slab <bio-0> at 0
[    0.056003] ACPI: Added _OSI(Module Device)
[    0.056003] ACPI: Added _OSI(Processor Device)
[    0.056003] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.056003] ACPI: Added _OSI(Processor Aggregator Device)
[    0.056003] ACPI: EC: Look up EC in DSDT
[    0.058253] ACPI: Interpreter enabled
[    0.058264] ACPI: (supports S0 S3 S4 S5)
[    0.058288] ACPI: Using IOAPIC for interrupt routing
[    0.110480] ACPI: EC: GPE = 0x21, I/O: command/status = 0x66, data = 0x62
[    0.110668] ACPI: No dock devices found.
[    0.110671] HEST: Table not found.
[    0.110678] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.110752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.110896] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.110901] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.110905] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.110910] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.110914] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[    0.110936] pci 0000:00:00.0: [10de:00d1] type 0 class 0x000600
[    0.110946] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[    0.111013] pci 0000:00:01.0: [10de:00d0] type 0 class 0x000601
[    0.111054] pci 0000:00:01.1: [10de:00d4] type 0 class 0x000c05
[    0.111078] pci 0000:00:01.1: reg 20: [io  0x2040-0x207f]
[    0.111085] pci 0000:00:01.1: reg 24: [io  0x2000-0x203f]
[    0.111104] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.111124] pci 0000:00:02.0: [10de:00d7] type 0 class 0x000c03
[    0.111135] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0000fff]
[    0.111170] pci 0000:00:02.0: supports D1 D2
[    0.111173] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111189] pci 0000:00:02.1: [10de:00d7] type 0 class 0x000c03
[    0.111200] pci 0000:00:02.1: reg 10: [mem 0xe0001000-0xe0001fff]
[    0.111234] pci 0000:00:02.1: supports D1 D2
[    0.111238] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111253] pci 0000:00:02.2: [10de:00d8] type 0 class 0x000c03
[    0.112025] pci 0000:00:02.2: reg 10: [mem 0xe0004000-0xe00040ff]
[    0.112061] pci 0000:00:02.2: supports D1 D2
[    0.112065] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112087] pci 0000:00:06.0: [10de:00da] type 0 class 0x000401
[    0.112098] pci 0000:00:06.0: reg 10: [io  0x1400-0x14ff]
[    0.112105] pci 0000:00:06.0: reg 14: [io  0x1c00-0x1c7f]
[    0.112112] pci 0000:00:06.0: reg 18: [mem 0xe0002000-0xe0002fff]
[    0.112140] pci 0000:00:06.0: supports D1 D2
[    0.112153] pci 0000:00:06.1: [10de:00d9] type 0 class 0x000703
[    0.112164] pci 0000:00:06.1: reg 10: [io  0x1800-0x18ff]
[    0.112171] pci 0000:00:06.1: reg 14: [io  0x1c80-0x1cff]
[    0.112178] pci 0000:00:06.1: reg 18: [mem 0xe0003000-0xe0003fff]
[    0.112206] pci 0000:00:06.1: PME# supported from D3cold
[    0.112227] pci 0000:00:08.0: [10de:00d5] type 0 class 0x000101
[    0.112250] pci 0000:00:08.0: reg 20: [io  0x2080-0x208f]
[    0.112282] pci 0000:00:0a.0: [10de:00dd] type 1 class 0x000604
[    0.112307] pci 0000:00:0b.0: [10de:00d2] type 1 class 0x000604
[    0.112352] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.112378] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.112399] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.112420] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.112442] PCI: peer root bus 00 res updated from pci conf
[    0.112466] pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
[    0.112481] pci 0000:02:00.0: reg 10: [mem 0xe0108000-0xe01087ff]
[    0.112491] pci 0000:02:00.0: reg 14: [mem 0xe0100000-0xe0103fff]
[    0.112542] pci 0000:02:00.0: supports D1 D2
[    0.112545] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.112569] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
[    0.112583] pci 0000:02:01.0: reg 10: [io  0x7000-0x70ff]
[    0.112593] pci 0000:02:01.0: reg 14: [mem 0xe0108800-0xe01088ff]
[    0.112641] pci 0000:02:01.0: supports D1 D2
[    0.112645] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.112661] pci 0000:02:02.0: [14e4:4320] type 0 class 0x000280
[    0.112673] pci 0000:02:02.0: reg 10: [mem 0xe0104000-0xe0105fff]
[    0.112726] pci 0000:02:04.0: [104c:ac54] type 2 class 0x000607
[    0.112741] pci 0000:02:04.0: reg 10: [mem 0xe0106000-0xe0106fff]
[    0.112764] pci 0000:02:04.0: supports D1 D2
[    0.112767] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112787] pci 0000:02:04.1: [104c:ac54] type 2 class 0x000607
[    0.112802] pci 0000:02:04.1: reg 10: [mem 0xe0107000-0xe0107fff]
[    0.112825] pci 0000:02:04.1: supports D1 D2
[    0.112829] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112848] pci 0000:02:04.2: [104c:8201] type 0 class 0x000880
[    0.112861] pci 0000:02:04.2: reg 10: [io  0x7400-0x743f]
[    0.112945] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.112950] pci 0000:00:0a.0:   bridge window [io  0x3000-0x7fff]
[    0.112955] pci 0000:00:0a.0:   bridge window [mem 0xe0100000-0xe17fffff]
[    0.112961] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.112969] pci 0000:02:04.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.113001] pci_bus 0000:03: [bus 03-06] partially hidden behind bridge 0000:02 [bus 02-02]
[    0.113028] pci_bus 0000:07: [bus 07-0a] partially hidden behind bridge 0000:02 [bus 02-02]
[    0.113055] pci 0000:01:00.0: [10de:0179] type 0 class 0x000300
[    0.113073] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[    0.113083] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[    0.113094] pci 0000:01:00.0: reg 18: [mem 0xf8000000-0xf807ffff pref]
[    0.113124] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.113193] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[    0.113200] pci 0000:00:0b.0:   bridge window [mem 0xe2000000-0xe2ffffff]
[    0.113205] pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xf80fffff pref]
[    0.113216] pci_bus 0000:00: on NUMA node 0
[    0.113221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.113321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[    0.113364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
[    0.113386]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.122495] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0
[    0.122588] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0
[    0.122678] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0
[    0.122769] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled.
[    0.122859] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0
[    0.122945] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0
[    0.123032] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0
[    0.123118] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0
[    0.123204] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0
[    0.123290] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.
[    0.123377] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0
[    0.123471] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0
[    0.123563] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.
[    0.123656] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
[    0.123840] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.123844] vgaarb: loaded
[    0.123846] vgaarb: bridge control possible 0000:01:00.0
[    0.123918] PCI: Using ACPI for IRQ routing
[    0.123924] PCI: pci_cache_line_size set to 64 bytes
[    0.123994] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.123999] reserve RAM buffer: 000000001ff70000 - 000000001fffffff 
[    0.126282] pnp: PnP ACPI init
[    0.126309] ACPI: bus type pnp registered
[    0.126450] pnp 00:00: [bus 00-ff]
[    0.126455] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.126458] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.126462] pnp 00:00: [io  0x0d00-0xffff window]
[    0.126466] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.126470] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.126473] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[    0.126554] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.126852] pnp 00:01: [io  0x8000-0x807f]
[    0.126855] pnp 00:01: [io  0x8080-0x80ff]
[    0.126859] pnp 00:01: [io  0x8400-0x847f]
[    0.126862] pnp 00:01: [io  0x8480-0x84ff]
[    0.126865] pnp 00:01: [io  0x8800-0x887f]
[    0.126869] pnp 00:01: [io  0x8880-0x88ff]
[    0.126872] pnp 00:01: [io  0x2040-0x207f]
[    0.126875] pnp 00:01: [io  0x2000-0x203f]
[    0.126961] system 00:01: [io  0x8000-0x807f] has been reserved
[    0.126966] system 00:01: [io  0x8080-0x80ff] has been reserved
[    0.126970] system 00:01: [io  0x8400-0x847f] has been reserved
[    0.126974] system 00:01: [io  0x8480-0x84ff] has been reserved
[    0.126981] system 00:01: [io  0x8800-0x887f] has been reserved
[    0.126985] system 00:01: [io  0x8880-0x88ff] has been reserved
[    0.126990] system 00:01: [io  0x2040-0x207f] has been reserved
[    0.126994] system 00:01: [io  0x2000-0x203f] has been reserved
[    0.127000] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127063] pnp 00:02: [mem 0xfff80000-0xffffffff]
[    0.127067] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.127071] pnp 00:02: [mem 0xfee00000-0xfeefffff]
[    0.127074] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.127140] system 00:02: [mem 0xfff80000-0xffffffff] has been reserved
[    0.127145] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.127150] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.127155] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.127160] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.148035] pnp 00:03: [io  0x0010-0x001f]
[    0.148039] pnp 00:03: [io  0x0022-0x003f]
[    0.148042] pnp 00:03: [io  0x0044-0x005f]
[    0.148046] pnp 00:03: [io  0x0062-0x0063]
[    0.148049] pnp 00:03: [io  0x0065-0x006f]
[    0.148053] pnp 00:03: [io  0x0072-0x0073]
[    0.148056] pnp 00:03: [io  0x0074-0x007f]
[    0.148059] pnp 00:03: [io  0x0091-0x0093]
[    0.148063] pnp 00:03: [io  0x0097-0x009f]
[    0.148066] pnp 00:03: [io  0x00a2-0x00bf]
[    0.148069] pnp 00:03: [io  0x0200-0x020f]
[    0.148073] pnp 00:03: [io  0x0680-0x06ff]
[    0.148076] pnp 00:03: [io  0x00e0-0x00ef]
[    0.148079] pnp 00:03: [io  0x04d0-0x04d1]
[    0.148083] pnp 00:03: [io  0xfe00-0xfe01]
[    0.148160] system 00:03: [io  0x0200-0x020f] has been reserved
[    0.148165] system 00:03: [io  0x0680-0x06ff] has been reserved
[    0.148169] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.148174] system 00:03: [io  0xfe00-0xfe01] has been reserved
[    0.148179] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148199] pnp 00:04: [io  0x0000-0x0008]
[    0.148202] pnp 00:04: [io  0x000a-0x000f]
[    0.148205] pnp 00:04: [io  0x0081-0x0083]
[    0.148209] pnp 00:04: [io  0x0087]
[    0.148212] pnp 00:04: [io  0x0089-0x008b]
[    0.148215] pnp 00:04: [io  0x008f]
[    0.148219] pnp 00:04: [io  0x00c0-0x00d1]
[    0.148222] pnp 00:04: [io  0x00d4-0x00df]
[    0.148226] pnp 00:04: [dma 4]
[    0.148269] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.148281] pnp 00:05: [io  0x0061]
[    0.148328] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.148341] pnp 00:06: [io  0x0070-0x0071]
[    0.148357] pnp 00:06: [irq 8]
[    0.148401] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.148414] pnp 00:07: [io  0x00f0-0x00f1]
[    0.148421] pnp 00:07: [irq 13]
[    0.148467] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.148489] pnp 00:08: [io  0x0060]
[    0.148492] pnp 00:08: [io  0x0064]
[    0.148500] pnp 00:08: [irq 1]
[    0.148556] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.148581] pnp 00:09: [irq 12]
[    0.148637] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.148778] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (disabled)
[    0.148804] pnp 00:0b: [io  0x0378-0x037f]
[    0.148804] pnp 00:0b: [io  0x0778-0x077b]
[    0.148804] pnp 00:0b: [irq 7]
[    0.148804] pnp 00:0b: [dma 1]
[    0.148804] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.148804] pnp: PnP ACPI: found 12 devices
[    0.148804] ACPI: ACPI bus type pnp unregistered
[    0.148804] PnPBIOS: Disabled by ACPI PNP
[    0.187831] Switching to clocksource acpi_pm
[    0.187867] PCI: max bus depth: 2 pci_try_num: 3
[    0.187908] pci 0000:00:0a.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
[    0.187917] pci 0000:02:04.1: BAR 16: can't assign mem (size 0x4000000)
[    0.187922] pci 0000:02:04.1: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[    0.187927] pci 0000:02:04.1: BAR 14: assigned [io  0x3000-0x30ff]
[    0.187931] pci 0000:02:04.1: BAR 13: assigned [io  0x3400-0x34ff]
[    0.187936] pci 0000:02:04.0: BAR 16: can't assign mem (size 0x4000000)
[    0.187941] pci 0000:02:04.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[    0.187946] pci 0000:02:04.0: BAR 14: assigned [io  0x3800-0x38ff]
[    0.187950] pci 0000:02:04.0: BAR 13: assigned [io  0x3c00-0x3cff]
[    0.187955] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[    0.187959] pci 0000:02:04.0:   bridge window [io  0x3c00-0x3cff]
[    0.187965] pci 0000:02:04.0:   bridge window [io  0x3800-0x38ff]
[    0.187970] pci 0000:02:04.0:   bridge window [mem 0x24000000-0x27ffffff pref]
[    0.187976] pci 0000:02:04.1: CardBus bridge to [bus 07-0a]
[    0.187980] pci 0000:02:04.1:   bridge window [io  0x3400-0x34ff]
[    0.187985] pci 0000:02:04.1:   bridge window [io  0x3000-0x30ff]
[    0.187990] pci 0000:02:04.1:   bridge window [mem 0x20000000-0x23ffffff pref]
[    0.187996] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.188000] pci 0000:00:0a.0:   bridge window [io  0x3000-0x7fff]
[    0.188005] pci 0000:00:0a.0:   bridge window [mem 0xe0100000-0xe17fffff]
[    0.188005] pci 0000:00:0a.0:   bridge window [mem 0x20000000-0x27ffffff pref]
[    0.188005] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8080000-0xf809ffff pref]
[    0.188005] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[    0.188005] pci 0000:00:0b.0:   bridge window [mem 0xe2000000-0xe2ffffff]
[    0.188005] pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xf80fffff pref]
[    0.188005] pci 0000:00:0a.0: setting latency timer to 64
[    0.188005] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
[    0.188005] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18
[    0.188005] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.188005] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.188005] pci_bus 0000:00: resource 6 [mem 0x20000000-0xfcffffffff]
[    0.188005] pci_bus 0000:02: resource 0 [io  0x3000-0x7fff]
[    0.188005] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe17fffff]
[    0.188005] pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
[    0.188005] pci_bus 0000:03: resource 0 [io  0x3c00-0x3cff]
[    0.188005] pci_bus 0000:03: resource 1 [io  0x3800-0x38ff]
[    0.188005] pci_bus 0000:03: resource 2 [mem 0x24000000-0x27ffffff pref]
[    0.188005] pci_bus 0000:07: resource 0 [io  0x3400-0x34ff]
[    0.188005] pci_bus 0000:07: resource 1 [io  0x3000-0x30ff]
[    0.188005] pci_bus 0000:07: resource 2 [mem 0x20000000-0x23ffffff pref]
[    0.188005] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe2ffffff]
[    0.188005] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf80fffff pref]
[    0.188005] NET: Registered protocol family 2
[    0.188005] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.188267] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.188379] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.188498] TCP: Hash tables configured (established 16384 bind 16384)
[    0.188501] TCP reno registered
[    0.188505] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.188515] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.188622] NET: Registered protocol family 1
[    0.188666] pci 0000:00:02.0: enabling device (0004 -> 0006)
[    0.188856] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[    0.444042] pci 0000:00:02.1: enabling device (0004 -> 0006)
[    0.444170] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[    0.700154] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[    0.700215] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.700232] pci 0000:01:00.0: Boot video device
[    0.700320] Unpacking initramfs...
[    1.085169] Freeing initrd memory: 9616k freed
[    1.095755] Simple Boot Flag at 0x37 set to 0x1
[    1.096310] audit: initializing netlink socket (disabled)
[    1.096327] type=2000 audit(1455193489.095:1): initialized
[    1.119046] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.119196] VFS: Disk quotas dquot_6.5.2
[    1.119232] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.119313] msgmni has been set to 1002
[    1.119511] alg: No test for stdrng (krng)
[    1.119542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.119547] io scheduler noop registered
[    1.119549] io scheduler deadline registered
[    1.119560] io scheduler cfq registered (default)
[    1.119718] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.119752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.119755] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.120209] ERST: Table is not found!
[    1.120212] GHES: HEST is not enabled!
[    1.120229] isapnp: Scanning for PnP cards...
[    1.474031] isapnp: No Plug & Play device found
[    1.474121] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.474751] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22
[    1.474938] Linux agpgart interface v0.103
[    1.475002] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1]
[    1.475011] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[    1.475018] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[    1.479415] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[    1.479671] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.489257] i8042: Detected active multiplexing controller, rev 1.1
[    1.494998] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.495007] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.495053] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.495093] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.495132] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.495301] mousedev: PS/2 mouse device common for all mice
[    1.497017] rtc_cmos 00:06: RTC can wake from S4
[    1.497144] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.497171] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    1.497188] cpuidle: using governor ladder
[    1.497192] cpuidle: using governor menu
[    1.497532] TCP cubic registered
[    1.497563] NET: Registered protocol family 10
[    1.498321] Mobile IPv6
[    1.498325] NET: Registered protocol family 17
[    1.498331] Registering the dns_resolver key type
[    1.498357] Using IPI No-Shortcut mode
[    1.498492] PM: Hibernation image not present or could not be loaded.
[    1.498506] registered taskstats version 1
[    1.498807] rtc_cmos 00:06: setting system clock to 2016-02-11 12:24:50 UTC (1455193490)
[    1.498858] Initializing network drop monitor service
[    1.499015] Freeing unused kernel memory: 424k freed
[    1.499467] Write protecting the kernel text: 2864k
[    1.499508] Write protecting the kernel read-only data: 1084k
[    1.499511] NX-protecting the kernel data: 3280k
[    1.521631] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.522091] udevd[43]: starting version 175
[    1.634786] SCSI subsystem initialized
[    1.657543] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.657575] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.658168] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.659291] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0x7000, 00:0f:b0:40:9d:22, IRQ 18
[    1.666285] usbcore: registered new interface driver usbfs
[    1.666323] usbcore: registered new interface driver hub
[    1.667484] ACPI: Invalid active0 threshold
[    1.673927] thermal LNXTHERM:00: registered as thermal_zone0
[    1.673933] ACPI: Thermal Zone [THRM] (33 C)
[    1.677565] usbcore: registered new device driver usb
[    1.678284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.678341] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    1.678346] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    1.678387] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    1.678422] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[    1.678450] ehci_hcd 0000:00:02.2: irq 20, io mem 0xe0004000
[    1.690928] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    1.690973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.690978] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.690982] usb usb1: Product: EHCI Host Controller
[    1.690985] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    1.690989] usb usb1: SerialNumber: 0000:00:02.2
[    1.701745] hub 1-0:1.0: USB hub found
[    1.701756] hub 1-0:1.0: 6 ports detected
[    1.702404] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.702460] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    1.702464] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    1.702481] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.702519] ohci_hcd 0000:00:02.0: irq 22, io mem 0xe0000000
[    1.702578] libata version 3.00 loaded.
[    1.732154] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.732878] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17
[    1.732942] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[    1.732949] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[    1.732956] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[    1.732962] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[    1.732968] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[    1.754586] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[    1.758149] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.758156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.758160] usb usb2: Product: OHCI Host Controller
[    1.758164] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.758167] usb usb2: SerialNumber: 0000:00:02.0
[    1.758350] hub 2-0:1.0: USB hub found
[    1.758359] hub 2-0:1.0: 3 ports detected
[    1.758460] pata_amd 0000:00:08.0: version 0.4.1
[    1.758526] pata_amd 0000:00:08.0: setting latency timer to 64
[    1.771837] scsi0 : pata_amd
[    1.773895] scsi1 : pata_amd
[    1.774550] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14
[    1.774555] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15
[    1.774696] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    1.774701] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    1.774720] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    1.774759] ohci_hcd 0000:00:02.1: irq 21, io mem 0xe0001000
[    1.830063] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.830070] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.830074] usb usb3: Product: OHCI Host Controller
[    1.830078] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.830081] usb usb3: SerialNumber: 0000:00:02.1
[    1.830395] hub 3-0:1.0: USB hub found
[    1.830403] hub 3-0:1.0: 3 ports detected
[    1.956501] ata1.00: ATA-6: FUJITSU MHT2080AT PL, 0022, max UDMA/100
[    1.956508] ata1.00: 156301488 sectors, multi 16: LBA 
[    1.956520] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
[    1.988372] ata1.00: configured for UDMA/100
[    1.988533] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
[    2.116042] Refined TSC clocksource calibration: 1595.882 MHz.
[    2.116050] Switching to clocksource tsc
[    2.152263] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4080N, 0C09, max MWDMA2
[    2.152274] ata2: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc6000000) ACPI=0x39f (120:600:0x12)
[    2.168193] ata2.00: configured for MWDMA2
[    2.173918] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4080N 0C09 PQ: 0 ANSI: 5
[    2.189415] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.189480] sd 0:0:0:0: [sda] Write Protect is off
[    2.189484] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.189512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.193927] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.193934] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.194511] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.232124] firewire_core: created device fw0: GUID 4a3f02004a3f0200, S400
[    2.263295]  sda: sda1 < sda5 sda6 sda7 >
[    2.263987] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.271299] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.271908] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.784034] floppy0: no floppy controllers found
[    4.803524] PM: Starting manual resume from disk
[    4.803532] PM: Hibernation image partition 8:5 present
[    4.803535] PM: Looking for hibernation image.
[    4.803890] PM: Image not found (code -22)
[    4.803893] PM: Hibernation image not present or could not be loaded.
[    4.865866] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    6.767103] udevd[326]: starting version 175
[    7.262893] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    7.262904] ACPI: Power Button [PWRB]
[    7.263002] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    7.264161] ACPI: Lid Switch [LID]
[    7.264436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.264444] ACPI: Power Button [PWRF]
[    7.265448] Marking TSC unstable due to TSC halts in idle
[    7.265465] ACPI: acpi_idle registered with cpuidle
[    7.287376] Switching to clocksource acpi_pm
[    7.363222] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:17/LNXVIDEO:00/input/input4
[    7.363234] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    7.635370] wmi: Mapper loaded
[    7.650832] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.677490] ACPI: AC Adapter [ACAD] (on-line)
[    7.691955] powernow-k8: Found 1 AMD Athlon(tm) XP Processor 3000+ (1 cpu cores) (version 2.20.00)
[    7.693235] powernow-k8: fid 0x8 (1600 MHz), vid 0x6
[    7.693240] powernow-k8: fid 0x0 (800 MHz), vid 0x18
[    7.807329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.904248] ACPI: Battery Slot [BAT1] (battery present)
[    8.018705] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006d]
[    8.018737] yenta_cardbus 0000:02:04.0: CardBus bridge to [bus 03-06]
[    8.018747] yenta_cardbus 0000:02:04.0:   bridge window [io  0x3c00-0x3cff]
[    8.018758] yenta_cardbus 0000:02:04.0:   bridge window [io  0x3800-0x38ff]
[    8.018769] yenta_cardbus 0000:02:04.0:   bridge window [mem 0x24000000-0x27ffffff pref]
[    8.018780] yenta_cardbus 0000:02:04.0:   bridge window [mem 0xe0400000-0xe07fffff]
[    8.018791] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
[    8.018801] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[    8.018808] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[    8.018818] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64
[    8.021421] parport_pc 00:0b: reported by Plug and Play ACPI
[    8.021486] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    8.036447] i2c i2c-0: nForce2 SMBus adapter at 0x2040
[    8.036516] i2c i2c-1: nForce2 SMBus adapter at 0x2000
[    8.248630] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c38, PCI irq 19
[    8.248642] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[    8.248652] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[    8.248675] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0x3000-0x7fff]
[    8.248686] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff 0x7000-0x70ff 0x7400-0x743f
[    8.264656] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe17fffff]
[    8.264668] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0100000-0xe17fffff: excluding 0xe0100000-0xe026ffff 0xe03e0000-0xe082ffff
[    8.264708] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[    8.264718] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
[    8.266328] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006d]
[    8.266358] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI
[    8.266366] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI
[    8.266377] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64
[    8.312546] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding nothing: probe failed.
[    8.312681] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding nothing: probe failed.
[    8.312757] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding nothing: probe failed.
[    8.312825] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding nothing: probe failed.
[    8.312900] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[    8.312960] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[    8.313019] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.313077] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: excluding nothing: probe failed.
[    8.463673] [drm] Initialized drm 1.1.0 20060810
[    8.488372] snd_intel8x0m 0000:00:06.1: setting latency timer to 64
[    8.494375] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21
[    8.494449] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[    8.496928] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0c38, PCI irq 18
[    8.496940] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[    8.496950] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[    8.496971] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [io  0x3000-0x7fff]
[    8.496981] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[    8.504851] cfg80211: Calling CRDA to update world regulatory domain
[    8.522642]  0x7000-0x70ff 0x7400-0x743f
[    8.525658] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe17fffff]
[    8.525670] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0100000-0xe17fffff: excluding 0xe0100000-0xe026ffff 0xe03e0000-0xe082ffff 0xe0b10000-0xe10cffff
[    8.525712] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[    8.525722] pcmcia_socket pcmcia_socket1: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
[    8.537933] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding nothing: probe failed.
[    8.538066] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding nothing: probe failed.
[    8.538141] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: excluding nothing: probe failed.
[    8.538208] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: excluding nothing: probe failed.
[    8.538282] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[    8.538341] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[    8.538399] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.538456] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: excluding nothing: probe failed.
[    8.850653] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    8.850668] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    8.851026] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16
[    8.856159] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x017900a5)
[    8.857612] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    8.927242] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    8.927249] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    8.928116] [drm] nouveau 0000:01:00.0: BMP BIOS found
[    8.928123] [drm] nouveau 0000:01:00.0: BMP version 5.41
[    8.928132] [drm] nouveau 0000:01:00.0: Bios version 04.17.20.49
[    8.939639] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    8.939646] [drm] nouveau 0000:01:00.0: DCB version 2.2
[    8.939651] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000100 000088b8
[    8.939656] [drm] nouveau 0000:01:00.0: DCB outp 01: 03010223 00000004
[    8.939660] [drm] nouveau 0000:01:00.0: DCB outp 02: 020203f1 00000003
[    8.940090] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[    8.940096] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF302
[    8.940147] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF828
[    8.940165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF42A
[    8.955115] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFB3C
[    8.955122] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB69
[    8.955130] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF608
[    8.976981] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF7C3
[    9.027489] [TTM] Zone  kernel: Available graphics memory: 256934 kiB
[    9.027494] [TTM] Initializing pool allocator
[    9.027502] [TTM] Initializing DMA pool allocator
[    9.027521] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
[    9.027705] agpgart-amd64 0000:00:00.0: AGP 2.0 bridge
[    9.027734] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 4x mode
[    9.027792] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[    9.027797] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[    9.027893] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    9.096935] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.096940] [drm] No driver support for vblank timestamp query.
[    9.103744] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[    9.103750] [drm] nouveau 0000:01:00.0: c: core 189MHz memory 405MHz
[    9.129748] [drm] nouveau 0000:01:00.0: Calling LVDS script 1:
[    9.129756] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[    9.129761] [drm] nouveau 0000:01:00.0: 0xE457: Parsing digital output script table
[    9.834239] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[    9.865582] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[    9.917382] intel8x0_measure_ac97_clock: measured 62711 usecs (3040 samples)
[    9.917387] intel8x0: clocking to 48000
[    9.948306] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo df193800
[    9.948415] fbcon: nouveaufb (fb0) is primary device
[    9.976080] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[    9.976086] [drm] nouveau 0000:01:00.0: 0xE4BA: Parsing digital output script table
[    9.992016] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[    9.992020] [drm] nouveau 0000:01:00.0: 0xE3E4: Parsing digital output script table
[    9.994241] Console: switching to colour frame buffer device 160x50
[    9.995331] fb0: nouveaufb frame buffer device
[    9.995334] drm: registered panic notifier
[    9.995341] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   10.012857] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
[   10.034404] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
[   10.090125] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.091077] Registered led device: b43-phy0::tx
[   10.091109] Registered led device: b43-phy0::rx
[   10.091140] Registered led device: b43-phy0::radio
[   10.091164] Broadcom 43xx driver loaded [ Features: PMNLS ]
[   10.696683] floppy0: no floppy controllers found
[   11.972229] Adding 2098172k swap on /dev/sda5.  Priority:-1 extents:1 across:2098172k 
[   12.006988] EXT4-fs (sda6): re-mounted. Opts: (null)
[   12.469996] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   12.656337] loop: module loaded
[   13.991095] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   15.459671] RPC: Registered named UNIX socket transport module.
[   15.459682] RPC: Registered udp transport module.
[   15.459688] RPC: Registered tcp transport module.
[   15.459694] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.516760] FS-Cache: Loaded
[   15.601402] FS-Cache: Netfs 'nfs' registered for caching
[   15.630131] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   21.431528] 8139too 0000:02:01.0: eth0: link down
[   21.431743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.609509] b43 ssb0:0: firmware: agent loaded b43/ucode5.fw into memory
[   21.858668] b43 ssb0:0: firmware: agent loaded b43/pcm5.fw into memory
[   21.992943] b43 ssb0:0: firmware: agent loaded b43/b0g0initvals5.fw into memory
[   22.030078] b43 ssb0:0: firmware: agent loaded b43/b0g0bsinitvals5.fw into memory
[   22.144078] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   22.214954] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.172742] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[   23.172756] [drm] nouveau 0000:01:00.0: 0xE457: Parsing digital output script table
[   23.911642] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[   23.911651] [drm] nouveau 0000:01:00.0: 0xE4BA: Parsing digital output script table
[   23.927577] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[   23.927584] [drm] nouveau 0000:01:00.0: 0xE3E4: Parsing digital output script table
[   26.184098] wlan0: authenticate with f4:ca:e5:d1:16:b8 (try 1)
[   26.186815] wlan0: authenticated
[   26.208101] wlan0: associate with f4:ca:e5:d1:16:b8 (try 1)
[   26.215452] wlan0: RX AssocResp from f4:ca:e5:d1:16:b8 (capab=0x411 status=0 aid=4)
[   26.215461] wlan0: associated
[   26.240304] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
alexandre@debian:~$

voila qu'en au live cd pour bougron je le ferais ce soir
merci encore


Modération : merci à l'avenir d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 11/02/2016, à 19:47)

Hors ligne

#33 Le 11/02/2016, à 14:41

Rufus T. Firefly

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Heureusement que j'ai précisé de mettre ça entre balises code ! yikes

La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#34 Le 11/02/2016, à 15:50

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

desole
c'est quoi en balise code ?
vraimant desole

Hors ligne

#35 Le 11/02/2016, à 16:00

Rufus T. Firefly

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Il faut lire les posts en entier : https://forum.ubuntu-fr.org/viewtopic.p … #p21456235
Faire 36 trucs en même temps ça ne donne jamais rien de bon...

La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#36 Le 11/02/2016, à 18:30

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

re
la et j'en suis desole ,je ne comprends pas bien ou tu veux en venir ,avec ta derniere reponse (lire le post en entier ) ,
je dois avoue que les" balises code " est quelque chose qui m'echappe un peu . je viens de faire un essai et ca ne marche pas ...
donc oui je suis mauvais ,mais je ne fais pas 36 trucs en meme temps (a part de la peinture ) ,
je n'ai fait qu'un  dmesg que j'ai copie sur une cle usb et colle sur mon ordi  car je poste de mon ordi a moi ....
la balise code permet de voir une console ?
je ne veux pas innonde de test de balises code qui ne marche pas ...
si cela est en texte quel est la difference , pas de quoi se facher ... m'en faire la remarque oui         ;=) 
mais si j'etais "queek " je repondrais aux questions,    je n'en poserais pas ....
bon merci quand meme pour le temps que tu m'a consacre car j'imagine que maintenant c'est fin de la discussion
dommage     roll

Hors ligne

#37 Le 11/02/2016, à 18:41

Rufus T. Firefly

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Quand tu cliques sur la balise code, quand tu saisis un message, tu vois apparaître code /code avec des crochets (des balises qui balisent une portion de texte). Et il suffit de coller le résultat de la commande entre ces 2 balises
Ou bien tu sélectionnes ce que tu viens de coller, et tu cliques sur la balise code après.
Ça donne ceci :

alexandre@debian:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[    0.000000]  BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Hewlett-Packard  Presario R3200 (PJ851EA#ABF)  /08A0, BIOS F.35 04/28/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1ff70 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-D3FFF write-back
[    0.000000]   D4000-D4FFF write-protect
[    0.000000]   D5000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFE0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-000000001ff70000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 001fe00000 page 2M
[    0.000000]  001fe00000 - 001ff70000 page 4k
[    0.000000] kernel direct mapping tables up to 1ff70000 @ 19f9000-1a00000
[    0.000000] RAMDISK: 1eb21000 - 1f485000
[    0.000000] ACPI: RSDP 000f7240 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 1ff7a89f 00034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 1ff7ee34 00074 (v01 NVIDIA CK8      06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 1ff7a8d3 04561 (v01 NVIDIA      CK8 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 1ff7ffc0 00040
[    0.000000] ACPI: APIC 1ff7eea8 0005A (v01 NVIDIA NV_APIC_ 06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 1ff7ef02 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 1ff7ef2a 000D6 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ff70000
[    0.000000]   low ram: 0 - 1ff70000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001ff70
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001ff70
[    0.000000] On node 0 totalpages: 130815
[    0.000000] free_area_init_node: node 0, pgdat c1414800, node_mem_map dfb6f200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125841 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @dfb5d000 s33344 r0 d24000 u57344
[    0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=42d631d0-4f55-43f6-b7a8-8c4e2eca7cea ro quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 503820k/523712k available (2860k kernel code, 19440k reserved, 1348k data, 424k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xe0770000 - 0xff9fe000   ( 498 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
[    0.000000]       .init : 0xc141d000 - 0xc1487000   ( 424 kB)
[    0.000000]       .data : 0xc12cb100 - 0xc141c200   (1348 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12cb100   (2860 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=de406000 soft=de408000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1596.088 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.17 BogoMIPS (lpj=6384352)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004070] Security Framework initialized
[    0.004078] AppArmor: AppArmor disabled by boot time parameter
[    0.004100] Mount-cache hash table entries: 512
[    0.004276] Initializing cgroup subsys cpuacct
[    0.004284] Initializing cgroup subsys memory
[    0.004298] Initializing cgroup subsys devices
[    0.004301] Initializing cgroup subsys freezer
[    0.004305] Initializing cgroup subsys net_cls
[    0.004309] Initializing cgroup subsys blkio
[    0.004320] Initializing cgroup subsys perf_event
[    0.004359] mce: CPU supports 5 MCE banks
[    0.004455] SMP alternatives: switching to UP code
[    0.008742] Freeing SMP alternatives: 8k freed
[    0.008750] ACPI: Core revision 20110623
[    0.012087] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.016152] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.055846] CPU0: AMD Athlon(tm) XP Processor 3000+ stepping 00
[    0.056003] Performance Events: AMD PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              48
[    0.056003] ... generic registers:      4
[    0.056003] ... value mask:             0000ffffffffffff
[    0.056003] ... max period:             00007fffffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000000000f
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Brought up 1 CPUs
[    0.056003] Total of 1 processors activated (3192.17 BogoMIPS).
[    0.056003] devtmpfs: initialized
[    0.056003] PM: Registering ACPI NVS region at 1ff7f000 (4096 bytes)
[    0.056003] print_constraints: dummy:
[    0.056003] NET: Registered protocol family 16
[    0.056003] node 0 link 0: io port [1000, fffff]
[    0.056003] TOM: 0000000020000000 aka 512M
[    0.056003] node 0 link 0: mmio [a0000, bffff]
[    0.056003] node 0 link 0: mmio [20000000, fe0bffff]
[    0.056003] bus: [00, ff] on node 0 link 0
[    0.056003] bus: 00 index 0 [io  0x0000-0xffff]
[    0.056003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.056003] bus: 00 index 2 [mem 0x20000000-0xfcffffffff]
[    0.056003] ACPI: bus type pci registered
[    0.056003] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[    0.056003] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2
[    0.056003] PCI: Using configuration type 1 for base access
[    0.056003] bio: create slab <bio-0> at 0
[    0.056003] ACPI: Added _OSI(Module Device)
[    0.056003] ACPI: Added _OSI(Processor Device)
[    0.056003] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.056003] ACPI: Added _OSI(Processor Aggregator Device)
[    0.056003] ACPI: EC: Look up EC in DSDT
[    0.058253] ACPI: Interpreter enabled
[    0.058264] ACPI: (supports S0 S3 S4 S5)
[    0.058288] ACPI: Using IOAPIC for interrupt routing
[    0.110480] ACPI: EC: GPE = 0x21, I/O: command/status = 0x66, data = 0x62
[    0.110668] ACPI: No dock devices found.
[    0.110671] HEST: Table not found.
[    0.110678] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.110752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.110896] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.110901] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.110905] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.110910] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.110914] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[    0.110936] pci 0000:00:00.0: [10de:00d1] type 0 class 0x000600
[    0.110946] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[    0.111013] pci 0000:00:01.0: [10de:00d0] type 0 class 0x000601
[    0.111054] pci 0000:00:01.1: [10de:00d4] type 0 class 0x000c05
[    0.111078] pci 0000:00:01.1: reg 20: [io  0x2040-0x207f]
[    0.111085] pci 0000:00:01.1: reg 24: [io  0x2000-0x203f]
[    0.111104] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.111124] pci 0000:00:02.0: [10de:00d7] type 0 class 0x000c03
[    0.111135] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0000fff]
[    0.111170] pci 0000:00:02.0: supports D1 D2
[    0.111173] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111189] pci 0000:00:02.1: [10de:00d7] type 0 class 0x000c03
[    0.111200] pci 0000:00:02.1: reg 10: [mem 0xe0001000-0xe0001fff]
[    0.111234] pci 0000:00:02.1: supports D1 D2
[    0.111238] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111253] pci 0000:00:02.2: [10de:00d8] type 0 class 0x000c03
[    0.112025] pci 0000:00:02.2: reg 10: [mem 0xe0004000-0xe00040ff]
[    0.112061] pci 0000:00:02.2: supports D1 D2
[    0.112065] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112087] pci 0000:00:06.0: [10de:00da] type 0 class 0x000401
[    0.112098] pci 0000:00:06.0: reg 10: [io  0x1400-0x14ff]
[    0.112105] pci 0000:00:06.0: reg 14: [io  0x1c00-0x1c7f]
[    0.112112] pci 0000:00:06.0: reg 18: [mem 0xe0002000-0xe0002fff]
[    0.112140] pci 0000:00:06.0: supports D1 D2
[    0.112153] pci 0000:00:06.1: [10de:00d9] type 0 class 0x000703
[    0.112164] pci 0000:00:06.1: reg 10: [io  0x1800-0x18ff]
[    0.112171] pci 0000:00:06.1: reg 14: [io  0x1c80-0x1cff]
[    0.112178] pci 0000:00:06.1: reg 18: [mem 0xe0003000-0xe0003fff]
[    0.112206] pci 0000:00:06.1: PME# supported from D3cold
[    0.112227] pci 0000:00:08.0: [10de:00d5] type 0 class 0x000101
[    0.112250] pci 0000:00:08.0: reg 20: [io  0x2080-0x208f]
[    0.112282] pci 0000:00:0a.0: [10de:00dd] type 1 class 0x000604
[    0.112307] pci 0000:00:0b.0: [10de:00d2] type 1 class 0x000604
[    0.112352] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.112378] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.112399] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.112420] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.112442] PCI: peer root bus 00 res updated from pci conf
[    0.112466] pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
[    0.112481] pci 0000:02:00.0: reg 10: [mem 0xe0108000-0xe01087ff]
[    0.112491] pci 0000:02:00.0: reg 14: [mem 0xe0100000-0xe0103fff]
[    0.112542] pci 0000:02:00.0: supports D1 D2
[    0.112545] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.112569] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
[    0.112583] pci 0000:02:01.0: reg 10: [io  0x7000-0x70ff]
[    0.112593] pci 0000:02:01.0: reg 14: [mem 0xe0108800-0xe01088ff]
[    0.112641] pci 0000:02:01.0: supports D1 D2
[    0.112645] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.112661] pci 0000:02:02.0: [14e4:4320] type 0 class 0x000280
[    0.112673] pci 0000:02:02.0: reg 10: [mem 0xe0104000-0xe0105fff]
[    0.112726] pci 0000:02:04.0: [104c:ac54] type 2 class 0x000607
[    0.112741] pci 0000:02:04.0: reg 10: [mem 0xe0106000-0xe0106fff]
[    0.112764] pci 0000:02:04.0: supports D1 D2
[    0.112767] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112787] pci 0000:02:04.1: [104c:ac54] type 2 class 0x000607
[    0.112802] pci 0000:02:04.1: reg 10: [mem 0xe0107000-0xe0107fff]
[    0.112825] pci 0000:02:04.1: supports D1 D2
[    0.112829] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112848] pci 0000:02:04.2: [104c:8201] type 0 class 0x000880
[    0.112861] pci 0000:02:04.2: reg 10: [io  0x7400-0x743f]
[    0.112945] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.112950] pci 0000:00:0a.0:   bridge window [io  0x3000-0x7fff]
[    0.112955] pci 0000:00:0a.0:   bridge window [mem 0xe0100000-0xe17fffff]
[    0.112961] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.112969] pci 0000:02:04.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.113001] pci_bus 0000:03: [bus 03-06] partially hidden behind bridge 0000:02 [bus 02-02]
[    0.113028] pci_bus 0000:07: [bus 07-0a] partially hidden behind bridge 0000:02 [bus 02-02]
[    0.113055] pci 0000:01:00.0: [10de:0179] type 0 class 0x000300
[    0.113073] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[    0.113083] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[    0.113094] pci 0000:01:00.0: reg 18: [mem 0xf8000000-0xf807ffff pref]
[    0.113124] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.113193] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[    0.113200] pci 0000:00:0b.0:   bridge window [mem 0xe2000000-0xe2ffffff]
[    0.113205] pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xf80fffff pref]
[    0.113216] pci_bus 0000:00: on NUMA node 0
[    0.113221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.113321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[    0.113364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
[    0.113386]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.122495] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0
[    0.122588] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0
[    0.122678] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0
[    0.122769] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled.
[    0.122859] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0
[    0.122945] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0
[    0.123032] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0
[    0.123118] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0
[    0.123204] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0
[    0.123290] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.
[    0.123377] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0
[    0.123471] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0
[    0.123563] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.
[    0.123656] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
[    0.123840] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.123844] vgaarb: loaded
[    0.123846] vgaarb: bridge control possible 0000:01:00.0
[    0.123918] PCI: Using ACPI for IRQ routing
[    0.123924] PCI: pci_cache_line_size set to 64 bytes
[    0.123994] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.123999] reserve RAM buffer: 000000001ff70000 - 000000001fffffff
[    0.126282] pnp: PnP ACPI init
[    0.126309] ACPI: bus type pnp registered
[    0.126450] pnp 00:00: [bus 00-ff]
[    0.126455] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.126458] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.126462] pnp 00:00: [io  0x0d00-0xffff window]
[    0.126466] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.126470] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.126473] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[    0.126554] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.126852] pnp 00:01: [io  0x8000-0x807f]
[    0.126855] pnp 00:01: [io  0x8080-0x80ff]
[    0.126859] pnp 00:01: [io  0x8400-0x847f]
[    0.126862] pnp 00:01: [io  0x8480-0x84ff]
[    0.126865] pnp 00:01: [io  0x8800-0x887f]
[    0.126869] pnp 00:01: [io  0x8880-0x88ff]
[    0.126872] pnp 00:01: [io  0x2040-0x207f]
[    0.126875] pnp 00:01: [io  0x2000-0x203f]
[    0.126961] system 00:01: [io  0x8000-0x807f] has been reserved
[    0.126966] system 00:01: [io  0x8080-0x80ff] has been reserved
[    0.126970] system 00:01: [io  0x8400-0x847f] has been reserved
[    0.126974] system 00:01: [io  0x8480-0x84ff] has been reserved
[    0.126981] system 00:01: [io  0x8800-0x887f] has been reserved
[    0.126985] system 00:01: [io  0x8880-0x88ff] has been reserved
[    0.126990] system 00:01: [io  0x2040-0x207f] has been reserved
[    0.126994] system 00:01: [io  0x2000-0x203f] has been reserved
[    0.127000] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127063] pnp 00:02: [mem 0xfff80000-0xffffffff]
[    0.127067] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.127071] pnp 00:02: [mem 0xfee00000-0xfeefffff]
[    0.127074] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.127140] system 00:02: [mem 0xfff80000-0xffffffff] has been reserved
[    0.127145] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.127150] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.127155] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.127160] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.148035] pnp 00:03: [io  0x0010-0x001f]
[    0.148039] pnp 00:03: [io  0x0022-0x003f]
[    0.148042] pnp 00:03: [io  0x0044-0x005f]
[    0.148046] pnp 00:03: [io  0x0062-0x0063]
[    0.148049] pnp 00:03: [io  0x0065-0x006f]
[    0.148053] pnp 00:03: [io  0x0072-0x0073]
[    0.148056] pnp 00:03: [io  0x0074-0x007f]
[    0.148059] pnp 00:03: [io  0x0091-0x0093]
[    0.148063] pnp 00:03: [io  0x0097-0x009f]
[    0.148066] pnp 00:03: [io  0x00a2-0x00bf]
[    0.148069] pnp 00:03: [io  0x0200-0x020f]
[    0.148073] pnp 00:03: [io  0x0680-0x06ff]
[    0.148076] pnp 00:03: [io  0x00e0-0x00ef]
[    0.148079] pnp 00:03: [io  0x04d0-0x04d1]
[    0.148083] pnp 00:03: [io  0xfe00-0xfe01]
[    0.148160] system 00:03: [io  0x0200-0x020f] has been reserved
[    0.148165] system 00:03: [io  0x0680-0x06ff] has been reserved
[    0.148169] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.148174] system 00:03: [io  0xfe00-0xfe01] has been reserved
[    0.148179] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.148199] pnp 00:04: [io  0x0000-0x0008]
[    0.148202] pnp 00:04: [io  0x000a-0x000f]
[    0.148205] pnp 00:04: [io  0x0081-0x0083]
[    0.148209] pnp 00:04: [io  0x0087]
[    0.148212] pnp 00:04: [io  0x0089-0x008b]
[    0.148215] pnp 00:04: [io  0x008f]
[    0.148219] pnp 00:04: [io  0x00c0-0x00d1]
[    0.148222] pnp 00:04: [io  0x00d4-0x00df]
[    0.148226] pnp 00:04: [dma 4]
[    0.148269] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.148281] pnp 00:05: [io  0x0061]
[    0.148328] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.148341] pnp 00:06: [io  0x0070-0x0071]
[    0.148357] pnp 00:06: [irq 8]
[    0.148401] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.148414] pnp 00:07: [io  0x00f0-0x00f1]
[    0.148421] pnp 00:07: [irq 13]
[    0.148467] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.148489] pnp 00:08: [io  0x0060]
[    0.148492] pnp 00:08: [io  0x0064]
[    0.148500] pnp 00:08: [irq 1]
[    0.148556] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.148581] pnp 00:09: [irq 12]
[    0.148637] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.148778] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (disabled)
[    0.148804] pnp 00:0b: [io  0x0378-0x037f]
[    0.148804] pnp 00:0b: [io  0x0778-0x077b]
[    0.148804] pnp 00:0b: [irq 7]
[    0.148804] pnp 00:0b: [dma 1]
[    0.148804] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.148804] pnp: PnP ACPI: found 12 devices
[    0.148804] ACPI: ACPI bus type pnp unregistered
[    0.148804] PnPBIOS: Disabled by ACPI PNP
[    0.187831] Switching to clocksource acpi_pm
[    0.187867] PCI: max bus depth: 2 pci_try_num: 3
[    0.187908] pci 0000:00:0a.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
[    0.187917] pci 0000:02:04.1: BAR 16: can't assign mem (size 0x4000000)
[    0.187922] pci 0000:02:04.1: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[    0.187927] pci 0000:02:04.1: BAR 14: assigned [io  0x3000-0x30ff]
[    0.187931] pci 0000:02:04.1: BAR 13: assigned [io  0x3400-0x34ff]
[    0.187936] pci 0000:02:04.0: BAR 16: can't assign mem (size 0x4000000)
[    0.187941] pci 0000:02:04.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[    0.187946] pci 0000:02:04.0: BAR 14: assigned [io  0x3800-0x38ff]
[    0.187950] pci 0000:02:04.0: BAR 13: assigned [io  0x3c00-0x3cff]
[    0.187955] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[    0.187959] pci 0000:02:04.0:   bridge window [io  0x3c00-0x3cff]
[    0.187965] pci 0000:02:04.0:   bridge window [io  0x3800-0x38ff]
[    0.187970] pci 0000:02:04.0:   bridge window [mem 0x24000000-0x27ffffff pref]
[    0.187976] pci 0000:02:04.1: CardBus bridge to [bus 07-0a]
[    0.187980] pci 0000:02:04.1:   bridge window [io  0x3400-0x34ff]
[    0.187985] pci 0000:02:04.1:   bridge window [io  0x3000-0x30ff]
[    0.187990] pci 0000:02:04.1:   bridge window [mem 0x20000000-0x23ffffff pref]
[    0.187996] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.188000] pci 0000:00:0a.0:   bridge window [io  0x3000-0x7fff]
[    0.188005] pci 0000:00:0a.0:   bridge window [mem 0xe0100000-0xe17fffff]
[    0.188005] pci 0000:00:0a.0:   bridge window [mem 0x20000000-0x27ffffff pref]
[    0.188005] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8080000-0xf809ffff pref]
[    0.188005] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[    0.188005] pci 0000:00:0b.0:   bridge window [mem 0xe2000000-0xe2ffffff]
[    0.188005] pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xf80fffff pref]
[    0.188005] pci 0000:00:0a.0: setting latency timer to 64
[    0.188005] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
[    0.188005] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18
[    0.188005] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.188005] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.188005] pci_bus 0000:00: resource 6 [mem 0x20000000-0xfcffffffff]
[    0.188005] pci_bus 0000:02: resource 0 [io  0x3000-0x7fff]
[    0.188005] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe17fffff]
[    0.188005] pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
[    0.188005] pci_bus 0000:03: resource 0 [io  0x3c00-0x3cff]
[    0.188005] pci_bus 0000:03: resource 1 [io  0x3800-0x38ff]
[    0.188005] pci_bus 0000:03: resource 2 [mem 0x24000000-0x27ffffff pref]
[    0.188005] pci_bus 0000:07: resource 0 [io  0x3400-0x34ff]
[    0.188005] pci_bus 0000:07: resource 1 [io  0x3000-0x30ff]
[    0.188005] pci_bus 0000:07: resource 2 [mem 0x20000000-0x23ffffff pref]
[    0.188005] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe2ffffff]
[    0.188005] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf80fffff pref]
[    0.188005] NET: Registered protocol family 2
[    0.188005] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.188267] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.188379] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.188498] TCP: Hash tables configured (established 16384 bind 16384)
[    0.188501] TCP reno registered
[    0.188505] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.188515] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.188622] NET: Registered protocol family 1
[    0.188666] pci 0000:00:02.0: enabling device (0004 -> 0006)
[    0.188856] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[    0.444042] pci 0000:00:02.1: enabling device (0004 -> 0006)
[    0.444170] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[    0.700154] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[    0.700215] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.700232] pci 0000:01:00.0: Boot video device
[    0.700320] Unpacking initramfs...
[    1.085169] Freeing initrd memory: 9616k freed
[    1.095755] Simple Boot Flag at 0x37 set to 0x1
[    1.096310] audit: initializing netlink socket (disabled)
[    1.096327] type=2000 audit(1455193489.095:1): initialized
[    1.119046] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.119196] VFS: Disk quotas dquot_6.5.2
[    1.119232] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.119313] msgmni has been set to 1002
[    1.119511] alg: No test for stdrng (krng)
[    1.119542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.119547] io scheduler noop registered
[    1.119549] io scheduler deadline registered
[    1.119560] io scheduler cfq registered (default)
[    1.119718] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.119752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.119755] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.120209] ERST: Table is not found!
[    1.120212] GHES: HEST is not enabled!
[    1.120229] isapnp: Scanning for PnP cards...
[    1.474031] isapnp: No Plug & Play device found
[    1.474121] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.474751] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22
[    1.474938] Linux agpgart interface v0.103
[    1.475002] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1]
[    1.475011] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[    1.475018] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[    1.479415] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[    1.479671] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.489257] i8042: Detected active multiplexing controller, rev 1.1
[    1.494998] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.495007] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.495053] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.495093] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.495132] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.495301] mousedev: PS/2 mouse device common for all mice
[    1.497017] rtc_cmos 00:06: RTC can wake from S4
[    1.497144] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.497171] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    1.497188] cpuidle: using governor ladder
[    1.497192] cpuidle: using governor menu
[    1.497532] TCP cubic registered
[    1.497563] NET: Registered protocol family 10
[    1.498321] Mobile IPv6
[    1.498325] NET: Registered protocol family 17
[    1.498331] Registering the dns_resolver key type
[    1.498357] Using IPI No-Shortcut mode
[    1.498492] PM: Hibernation image not present or could not be loaded.
[    1.498506] registered taskstats version 1
[    1.498807] rtc_cmos 00:06: setting system clock to 2016-02-11 12:24:50 UTC (1455193490)
[    1.498858] Initializing network drop monitor service
[    1.499015] Freeing unused kernel memory: 424k freed
[    1.499467] Write protecting the kernel text: 2864k
[    1.499508] Write protecting the kernel read-only data: 1084k
[    1.499511] NX-protecting the kernel data: 3280k
[    1.521631] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.522091] udevd[43]: starting version 175
[    1.634786] SCSI subsystem initialized
[    1.657543] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.657575] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.658168] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.659291] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0x7000, 00:0f:b0:40:9d:22, IRQ 18
[    1.666285] usbcore: registered new interface driver usbfs
[    1.666323] usbcore: registered new interface driver hub
[    1.667484] ACPI: Invalid active0 threshold
[    1.673927] thermal LNXTHERM:00: registered as thermal_zone0
[    1.673933] ACPI: Thermal Zone [THRM] (33 C)
[    1.677565] usbcore: registered new device driver usb
[    1.678284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.678341] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    1.678346] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    1.678387] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    1.678422] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[    1.678450] ehci_hcd 0000:00:02.2: irq 20, io mem 0xe0004000
[    1.690928] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    1.690973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.690978] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.690982] usb usb1: Product: EHCI Host Controller
[    1.690985] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    1.690989] usb usb1: SerialNumber: 0000:00:02.2
[    1.701745] hub 1-0:1.0: USB hub found
[    1.701756] hub 1-0:1.0: 6 ports detected
[    1.702404] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.702460] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    1.702464] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    1.702481] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.702519] ohci_hcd 0000:00:02.0: irq 22, io mem 0xe0000000
[    1.702578] libata version 3.00 loaded.
[    1.732154] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.732878] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17
[    1.732942] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[    1.732949] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[    1.732956] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[    1.732962] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[    1.732968] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[    1.754586] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[    1.758149] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.758156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.758160] usb usb2: Product: OHCI Host Controller
[    1.758164] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.758167] usb usb2: SerialNumber: 0000:00:02.0
[    1.758350] hub 2-0:1.0: USB hub found
[    1.758359] hub 2-0:1.0: 3 ports detected
[    1.758460] pata_amd 0000:00:08.0: version 0.4.1
[    1.758526] pata_amd 0000:00:08.0: setting latency timer to 64
[    1.771837] scsi0 : pata_amd
[    1.773895] scsi1 : pata_amd
[    1.774550] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14
[    1.774555] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15
[    1.774696] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    1.774701] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    1.774720] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    1.774759] ohci_hcd 0000:00:02.1: irq 21, io mem 0xe0001000
[    1.830063] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.830070] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.830074] usb usb3: Product: OHCI Host Controller
[    1.830078] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.830081] usb usb3: SerialNumber: 0000:00:02.1
[    1.830395] hub 3-0:1.0: USB hub found
[    1.830403] hub 3-0:1.0: 3 ports detected
[    1.956501] ata1.00: ATA-6: FUJITSU MHT2080AT PL, 0022, max UDMA/100
[    1.956508] ata1.00: 156301488 sectors, multi 16: LBA
[    1.956520] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
[    1.988372] ata1.00: configured for UDMA/100
[    1.988533] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
[    2.116042] Refined TSC clocksource calibration: 1595.882 MHz.
[    2.116050] Switching to clocksource tsc
[    2.152263] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4080N, 0C09, max MWDMA2
[    2.152274] ata2: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc6000000) ACPI=0x39f (120:600:0x12)
[    2.168193] ata2.00: configured for MWDMA2
[    2.173918] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4080N 0C09 PQ: 0 ANSI: 5
[    2.189415] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.189480] sd 0:0:0:0: [sda] Write Protect is off
[    2.189484] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.189512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.193927] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.193934] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.194511] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.232124] firewire_core: created device fw0: GUID 4a3f02004a3f0200, S400
[    2.263295]  sda: sda1 < sda5 sda6 sda7 >
[    2.263987] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.271299] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.271908] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.784034] floppy0: no floppy controllers found
[    4.803524] PM: Starting manual resume from disk
[    4.803532] PM: Hibernation image partition 8:5 present
[    4.803535] PM: Looking for hibernation image.
[    4.803890] PM: Image not found (code -22)
[    4.803893] PM: Hibernation image not present or could not be loaded.
[    4.865866] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    6.767103] udevd[326]: starting version 175
[    7.262893] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    7.262904] ACPI: Power Button [PWRB]
[    7.263002] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    7.264161] ACPI: Lid Switch [LID]
[    7.264436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.264444] ACPI: Power Button [PWRF]
[    7.265448] Marking TSC unstable due to TSC halts in idle
[    7.265465] ACPI: acpi_idle registered with cpuidle
[    7.287376] Switching to clocksource acpi_pm
[    7.363222] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:17/LNXVIDEO:00/input/input4
[    7.363234] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    7.635370] wmi: Mapper loaded
[    7.650832] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.677490] ACPI: AC Adapter [ACAD] (on-line)
[    7.691955] powernow-k8: Found 1 AMD Athlon(tm) XP Processor 3000+ (1 cpu cores) (version 2.20.00)
[    7.693235] powernow-k8: fid 0x8 (1600 MHz), vid 0x6
[    7.693240] powernow-k8: fid 0x0 (800 MHz), vid 0x18
[    7.807329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.904248] ACPI: Battery Slot [BAT1] (battery present)
[    8.018705] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006d]
[    8.018737] yenta_cardbus 0000:02:04.0: CardBus bridge to [bus 03-06]
[    8.018747] yenta_cardbus 0000:02:04.0:   bridge window [io  0x3c00-0x3cff]
[    8.018758] yenta_cardbus 0000:02:04.0:   bridge window [io  0x3800-0x38ff]
[    8.018769] yenta_cardbus 0000:02:04.0:   bridge window [mem 0x24000000-0x27ffffff pref]
[    8.018780] yenta_cardbus 0000:02:04.0:   bridge window [mem 0xe0400000-0xe07fffff]
[    8.018791] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
[    8.018801] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[    8.018808] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[    8.018818] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64
[    8.021421] parport_pc 00:0b: reported by Plug and Play ACPI
[    8.021486] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    8.036447] i2c i2c-0: nForce2 SMBus adapter at 0x2040
[    8.036516] i2c i2c-1: nForce2 SMBus adapter at 0x2000
[    8.248630] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c38, PCI irq 19
[    8.248642] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[    8.248652] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[    8.248675] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0x3000-0x7fff]
[    8.248686] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff 0x7000-0x70ff 0x7400-0x743f
[    8.264656] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe17fffff]
[    8.264668] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0100000-0xe17fffff: excluding 0xe0100000-0xe026ffff 0xe03e0000-0xe082ffff
[    8.264708] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[    8.264718] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
[    8.266328] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006d]
[    8.266358] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI
[    8.266366] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI
[    8.266377] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64
[    8.312546] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding nothing: probe failed.
[    8.312681] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding nothing: probe failed.
[    8.312757] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding nothing: probe failed.
[    8.312825] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding nothing: probe failed.
[    8.312900] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[    8.312960] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[    8.313019] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.313077] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: excluding nothing: probe failed.
[    8.463673] [drm] Initialized drm 1.1.0 20060810
[    8.488372] snd_intel8x0m 0000:00:06.1: setting latency timer to 64
[    8.494375] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21
[    8.494449] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[    8.496928] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0c38, PCI irq 18
[    8.496940] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[    8.496950] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[    8.496971] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [io  0x3000-0x7fff]
[    8.496981] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[    8.504851] cfg80211: Calling CRDA to update world regulatory domain
[    8.522642]  0x7000-0x70ff 0x7400-0x743f
[    8.525658] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe17fffff]
[    8.525670] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0100000-0xe17fffff: excluding 0xe0100000-0xe026ffff 0xe03e0000-0xe082ffff 0xe0b10000-0xe10cffff
[    8.525712] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[    8.525722] pcmcia_socket pcmcia_socket1: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
[    8.537933] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding nothing: probe failed.
[    8.538066] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding nothing: probe failed.
[    8.538141] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: excluding nothing: probe failed.
[    8.538208] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: excluding nothing: probe failed.
[    8.538282] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[    8.538341] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[    8.538399] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.538456] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: excluding nothing: probe failed.
[    8.850653] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    8.850668] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    8.851026] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16
[    8.856159] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x017900a5)
[    8.857612] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    8.927242] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    8.927249] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    8.928116] [drm] nouveau 0000:01:00.0: BMP BIOS found
[    8.928123] [drm] nouveau 0000:01:00.0: BMP version 5.41
[    8.928132] [drm] nouveau 0000:01:00.0: Bios version 04.17.20.49
[    8.939639] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    8.939646] [drm] nouveau 0000:01:00.0: DCB version 2.2
[    8.939651] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000100 000088b8
[    8.939656] [drm] nouveau 0000:01:00.0: DCB outp 01: 03010223 00000004
[    8.939660] [drm] nouveau 0000:01:00.0: DCB outp 02: 020203f1 00000003
[    8.940090] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[    8.940096] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF302
[    8.940147] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF828
[    8.940165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF42A
[    8.955115] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFB3C
[    8.955122] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB69
[    8.955130] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF608
[    8.976981] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF7C3
[    9.027489] [TTM] Zone  kernel: Available graphics memory: 256934 kiB
[    9.027494] [TTM] Initializing pool allocator
[    9.027502] [TTM] Initializing DMA pool allocator
[    9.027521] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
[    9.027705] agpgart-amd64 0000:00:00.0: AGP 2.0 bridge
[    9.027734] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 4x mode
[    9.027792] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[    9.027797] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[    9.027893] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    9.096935] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.096940] [drm] No driver support for vblank timestamp query.
[    9.103744] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[    9.103750] [drm] nouveau 0000:01:00.0: c: core 189MHz memory 405MHz
[    9.129748] [drm] nouveau 0000:01:00.0: Calling LVDS script 1:
[    9.129756] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[    9.129761] [drm] nouveau 0000:01:00.0: 0xE457: Parsing digital output script table
[    9.834239] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[    9.865582] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[    9.917382] intel8x0_measure_ac97_clock: measured 62711 usecs (3040 samples)
[    9.917387] intel8x0: clocking to 48000
[    9.948306] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo df193800
[    9.948415] fbcon: nouveaufb (fb0) is primary device
[    9.976080] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[    9.976086] [drm] nouveau 0000:01:00.0: 0xE4BA: Parsing digital output script table
[    9.992016] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[    9.992020] [drm] nouveau 0000:01:00.0: 0xE3E4: Parsing digital output script table
[    9.994241] Console: switching to colour frame buffer device 160x50
[    9.995331] fb0: nouveaufb frame buffer device
[    9.995334] drm: registered panic notifier
[    9.995341] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   10.012857] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
[   10.034404] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
[   10.090125] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.091077] Registered led device: b43-phy0::tx
[   10.091109] Registered led device: b43-phy0::rx
[   10.091140] Registered led device: b43-phy0::radio
[   10.091164] Broadcom 43xx driver loaded [ Features: PMNLS ]
[   10.696683] floppy0: no floppy controllers found
[   11.972229] Adding 2098172k swap on /dev/sda5.  Priority:-1 extents:1 across:2098172k
[   12.006988] EXT4-fs (sda6): re-mounted. Opts: (null)
[   12.469996] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   12.656337] loop: module loaded
[   13.991095] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   15.459671] RPC: Registered named UNIX socket transport module.
[   15.459682] RPC: Registered udp transport module.
[   15.459688] RPC: Registered tcp transport module.
[   15.459694] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.516760] FS-Cache: Loaded
[   15.601402] FS-Cache: Netfs 'nfs' registered for caching
[   15.630131] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   21.431528] 8139too 0000:02:01.0: eth0: link down
[   21.431743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.609509] b43 ssb0:0: firmware: agent loaded b43/ucode5.fw into memory
[   21.858668] b43 ssb0:0: firmware: agent loaded b43/pcm5.fw into memory
[   21.992943] b43 ssb0:0: firmware: agent loaded b43/b0g0initvals5.fw into memory
[   22.030078] b43 ssb0:0: firmware: agent loaded b43/b0g0bsinitvals5.fw into memory
[   22.144078] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   22.214954] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.172742] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[   23.172756] [drm] nouveau 0000:01:00.0: 0xE457: Parsing digital output script table
[   23.911642] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[   23.911651] [drm] nouveau 0000:01:00.0: 0xE4BA: Parsing digital output script table
[   23.927577] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[   23.927584] [drm] nouveau 0000:01:00.0: 0xE3E4: Parsing digital output script table
[   26.184098] wlan0: authenticate with f4:ca:e5:d1:16:b8 (try 1)
[   26.186815] wlan0: authenticated
[   26.208101] wlan0: associate with f4:ca:e5:d1:16:b8 (try 1)
[   26.215452] wlan0: RX AssocResp from f4:ca:e5:d1:16:b8 (capab=0x411 status=0 aid=4)
[   26.215461] wlan0: associated
[   26.240304] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

C'est quand même plus exploitable et plus lisible que sans les balises...

A part ça, il n'y a rien de particulier, là-dedans. Sans doute quand même quelque chose avec le disque dur, mais un peu aléatoire. Une poussière dans un connecteur ? C'est le genre de truc chiant : quand ça fonctionne, pas de message particulier, donc en fait tout fonctionne parfaitement bien. Et quand ça ne fonctionne pas, pas de message du tout, puisque ça bloque...
Installe smartmontools

sudo apt-get install smartmontools

Puis teste de temps en temps :

sudo smartctl -a /dev/sda

Peut-être qu'on verra quelque chose ?
(renvoie les résultats entre balises code wink )

Dernière modification par Rufus T. Firefly (Le 11/02/2016, à 19:06)

La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme

Hors ligne

#38 Le 11/02/2016, à 19:06

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

ok merci pour ta reponse
pour bougron qui me l'avit demande j'ai fait un smartctl avec cdrescue live et cela donne :

root@sysresccd /root % smartctl -s on -a /dev/sda
smartctl 6.4 2015-06-04 r4109 [i686-linux-3.18.25-std471-i586] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Fujitsu MHT
Device Model:     FUJITSU MHT2080AT PL
Serial Number:    NN4FT4A15VMF
Firmware Version: 0022
User Capacity:    80,026,361,856 bytes [80.0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-6 T13/1410D revision 3a
Local Time is:    Thu Feb 11 16:56:22 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  587) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  80) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail  Always       -       124065
  2 Throughput_Performance  0x0005   100   100   030    Pre-fail  Offline      -       31457280
  3 Spin_Up_Time            0x0003   100   100   025    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       3378
  5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail  Always       -       0 (2000 0)
  7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail  Always       -       3834
  8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail  Offline      -       0
  9 Power_On_Seconds        0x0032   047   047   000    Old_age   Always       -       26722h+10m+54s
 10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       3249
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       250
193 Load_Cycle_Count        0x0032   071   071   000    Old_age   Always       -       295829
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       22 (Min/Max 14/56)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       2374
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0 (0 4207)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  Always       -       16804
203 Run_Out_Cancel          0x0002   100   099   000    Old_age   Always       -       1529019040697

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       627         -
# 2  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay

voila j'espere que cela a marche

Hors ligne

#39 Le 11/02/2016, à 19:54

Bougron

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Bonsoir
J'ai comparé les deux rapports.  J'ai éliminé ce qui me semblait identique et conservé seulement les données anormales.
  On constate qu'en 5 heures de fonctionnement ces valeurs ont quasiment doublées par rapport aux 26000 premières heures.
Personnellement, je pense qu'elles expliquent les résultats aléatoires des boots.   Mais je suis juge et partie car cette façon de booter je voulais en trouver la cause dans la qualité du disque.   Donc je n'ai pas du tout regardé la trace du boot.  Il peut donc y avoir aussi une autre cause.
Je dirais bravo pour la qualité de ce disque.    Mais comme il est ancien, je ne sais pas s'il va prévenir de sa mort dans 24 heures.   D'autant plus qu'il n'y a aucune erreur  de secteurs réalloués     

  1 Raw_Read_Error_Rate   Pre-fail  Always    124065   => ancienne  valeur 8737
  7 Seek_Error_Rate       Pre-fail  Always      3834   => ancienne  valeur 1188
  9 Power_On_Seconds   26722h+10m+54s  ==> ancienne valeur 26715h+39m+14s 
195 Hardware_ECC_Recovered Old_age   Always     2374   => ancienne valeur 154
200 Multi_Zone_Error_Rate  Pre-fail  Always    16804   => ancienne valeur 8895

=====> il faut continuer à surveiller.

J'ai regardé le DMESG fourni.
Je ne sais pas s'il  est complet. Cela  se terminer rapidement au bout de 26 secondes.

[   26.215461] wlan0: associated
[   26.240304] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Dans cette trace, tout est parfait. Aucune anomalie disque détectée!

Dernière modification par Bougron (Le 14/02/2016, à 14:06)

Hors ligne

#40 Le 14/02/2016, à 12:21

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

bonjour a tous ceux qui m'on aide et aux autres
l'ordinausore demarre "relativement" bien jusqu'a maintenant ; il marche a merveille pour une vieille petoire ; je le donne demain a son proprietaire avec une petite formation linux ... 
je clos le post et merci encore

Hors ligne

#41 Le 15/02/2016, à 22:22

Caribou22

Re : demarrage difficile et aleatoire quelque soit la distribution installé

Bonsoir,
Bonne nouvelle ! Tu as installé quoi du coup ? (Je n'ai pas tout suivi.)

Ca y est, j'ai mon propre site ! :D
Mes conseils aux débutants | A lire si vous envisagez d'acheter un nouvel ordi
rmy, membre Ubuntu-fr, sauve vos données perdues

Hors ligne

#42 Le 17/02/2016, à 19:35

ralain33

Re : demarrage difficile et aleatoire quelque soit la distribution installé

bonsoir pour caribou
j'ai installe une  Debian wheezy (7.9.0), 32 bits,  xfce  qui marche nickel malgre ce leger "calage"au demarrage
big_smile

Hors ligne

Pages : 1 2