[Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

F50 · Le 18/11/2014, à 09:17

Salut,

Je débute sous Nvidia avec un nouveau portable qui en est doté ainsi qu'une Intel HD 4600 intégrée. Pour ces optimus, certains optent pour Prime et d'autres pour Bumblebee, il semble y avoir des différences de performances. Si j'ai bien compris, Prime permet de meilleures perf et l'accélération graphique au détriment de l'autonomie mais demande de se déconnecter lors du switch d'une carte à l'autre (assez emmerdant). Tandis que Bumblebee privilégie l'autonomie, le switch ne demande pas de déconnexion, mais qu'en est-il de accélération ? Quelqu'un peut-il m'éclairer sur le bon choix et sa procédure d'installation ?

Merci.

Dernière modification par fcn50 (Le 30/12/2014, à 11:18)

Korak · Le 18/11/2014, à 09:21

Bonjour,

Je ne vais pas t'aider mais juste te poser une question: pourquoi avoir acheté un PC portable avec deux cartes graphiques et une technologie graphique hybride?

Apparemment, c'est une plaie sous Linux.

F50 · Le 18/11/2014, à 09:34

Salut Korak,

Ben, parce que les constructeurs font pratiquement tous des dual GPU et que ça ne laisse pas trop le choix, alors j'ai pris le moins pire car AMD/Intel c'est un désastre tandis que Nvidia/Intel fonctionne à part quelques limitations.

Korak · Le 18/11/2014, à 10:09

J'ai récemment acheté un HP Pavilion 17-f055nb (650 €).

J'ai choisi ce PC car il n'a pas de technologie graphique hybride.

ArchangeGabriel · Le 21/11/2014, à 19:25

Le bon choix dépend de ce que tu veux.

Bumblebee : carte NVIDIA éteinte la plupart du temps, tu peux démarrer des programmes spécifiques dessus via optirun, cette solution offre la meilleure autonomie mais pas les meilleures perfs, et ça ne fonctionne pas pour certaines applications et certaines fonctionnalités.

PRIME : il faut se déconnecter pour passer de la carte Intel à la carte NVIDIA, c’est moins bon en terme d’ergonomie donc, meilleures perfs mais moins bonne autonomie, et normalement tout devrait fonctionner via cela, mais encore pas mal de bugs a priori.

F50 · Le 21/11/2014, à 19:35

Super merci ArchangeGabriel. C'est bien ce que j'avais compris... J'opte plutôt pour Bumblebee (autonomie/ergonomie), tu as un tuto pour l'install ou la doc est à jour, quel pilote nvidia installer et quelles applications ne supporte pas Bumblebee ?

Là, après quelques heures d'utilisation mon portable est plutôt très calme avec juste le pilote intel et nouveau qui envoi des erreurs mais j'en suis pas encore à l'optimisation et aux détails, plutôt dans les grandes lignes.

ArchangeGabriel · Le 21/11/2014, à 19:43

Non, il n’y a plus de doc à jour sur le sujet.

Mais de toutes façons, sous Ubuntu normalement tu fais juste ça :

sudo apt-get install bumblebee

Et c’est tout bon. Côté appli qui marchent pas, c’est assez spécifique et ça dépend du backend utilisé (primus a priori, de très rares applications peuvent nécessiter VirtualGL). Le seul vrai exemple ce sont les applications dépendant de VDPAU, mais dans la pratique il n’y en a quasiment pas, et le plus souvent VAAPI fait l’affaire à la place. Globalement, part du principe que tout fonctionne, et si quelque chose marche pas, reporte un bug.

F50 · Le 21/11/2014, à 19:52

Ok merci.

Donc sudo apt-get install bumblebee installe aussi le pilote nvidia dans la foulée ? Pour les applications, je comptais justement installer des trucs du genre smplayer et pouvoir disposer de l'accélération graphique (vidéos en HD), j'avais cru que VDPAU et VAAPI c'était la même chose, je me trompe ?

ArchangeGabriel · Le 21/11/2014, à 19:56

Oui. Oui. VDPAU c’est le truc de NVIDIA, VAAPI c’est celui d’Intel, maintenant il y a des interfaces VDPAU-VAAPI et dans réciproquement. Bref, normalement les applications font ce qu’il faut par défaut, sinon c’est VAAPI qu’il faut utiliser dans ton cas.

F50 · Le 21/11/2014, à 20:12

Ah d'accord, VAAPI c'est l'accélération chez Intel et VDPAU chez Nvidia. De toute façon smplayer en vaapi il n'y en a qu'un. Ça me dérange pas d'utiliser VAAPI si ça fonctionne pour de la HD.
Tu dis : VAAPI qu’il faut utiliser dans ton cas, question autonomie, c'est bien ça ?

Encore merci.

ArchangeGabriel · Le 22/11/2014, à 00:32

Non, question VAAPI est meilleur que VDPAU de mon point de vue, et surtout VDPAU pas accessible avec Bumblebee.

WATTT · Le 22/11/2014, à 02:45

Si tu as une application qui requiert VDPAU (style Flash), il y a toujours un driver VDPAU utilisant VA-API. (paquet "libvdpau-va-gl1").
Normalement, la carte Intel est largement suffisante pour décoder des films HD, tu n'auras donc probablement pas besoin de la puce NVIDIA.

F50 · Le 22/11/2014, à 17:24

Merci WATTT pour ces précisions. Hier j'ai installé bumblebee mais lors du test optirun glxspheres ou glxspheres64 ça me donnais l'erreur :

[   43.284053] [ERROR]Could not connect to /var/run/bumblebee.socket! Error: Connection refused
[   43.284083] [ERROR]Could not connect to bumblebee daemon - is it running?

J'ai ensuite suivi la procédure de la doc :

http://doc.ubuntu-fr.org/bumblebee

sudo apt-get purge bbswitch-dkms nvidia-current
sudo apt-get install linux-headers-generic
sudo apt-get install --reinstall nvidia-current bbswitch-dkms bumblebee

Mais ça ne marche pas (enfin, je ne sais pas comment contrôler ça), de plus, je n'ai pas de xorg.conf qui c'est créé. Les conseilles sont bienvenu, je débute sous Nvidia, merci.

F50 · Le 26/11/2014, à 12:34

Je viens de refaire une install fraîche en UEFI et j'aimerais bien savoir quel pilote installer et s'il faut l'installer avant bumblebee pour avoir le dernier ? La fois d'avant en installant bumblebee il m'avait installé le 304 si je ne me trompe pas !? En plus y'avait pas de xorg.conf généré.

Dernière modification par fcn50 (Le 26/11/2014, à 12:35)

ArchangeGabriel · Le 27/11/2014, à 19:44

Tu peux installer spécifiquement n’importe quel paquet NVIDIA, normalement bumblebee-nvidia gère ça bien, dans le doute après avoir installé le driver de ton choix, fais un petit `sudo apt-get install --reinstall bumblebee-nvidia`. Tu peux en changer quand tu veux.

F50 · Le 28/11/2014, à 09:20

Merci pour ces précisions ArchangeGabriel.

J'ai donc installé nvidia 331 et bumblebee-nvidia > et toujours l'erreur après reboot :

[   43.284053] [ERROR]Could not connect to /var/run/bumblebee.socket! Error: Connection refused
[   43.284083] [ERROR]Could not connect to bumblebee daemon - is it running?

Puis, j'ai fais un lspci -v pour voir, quelle ne fut pas ma surprise de ne pas trouver la GT750M listée ! Reboot > BIOS et là aussi GT750M non détectée (Discrete Graphics 1 [Not Detected]) "merde je suis bon pour renvoyer le bousin" ! Reboot > recherche internet (Alinware 14 Discrete Graphics 1 [Not Detected]) et je trouve pas mal de gens dans la même situation = FN + F5 switch en l'intégré la dédié je presse > reboot > BIOS et là elle détecté. Boot ce matin et arrêt après :

kernel: [    4.684018] EXT4-fs (sda1): re-mounted. Opts: discard,commit=60,errors=remount-ro

Hard shutdown > boot > mode dépannage > reprendre le boot normalement > et là je fini en tty > startx sur :

[EE] Server error no screen found

cat /var/log/Xorg.0.log (la fin du log) :

(EE) vesa (0) : V_BIOS address 0x0 out of range
(II) unloading vbe

Puis :

(EE) Sevrver(s) found but none have a usable configuration.

Nvidia semble installé mais comme dit dès le début, malgré les diverses install du pilote il ne c'est jamais créé de xorg.conf. Pourquoi ? Le seul truc à tenté, c'est d'en créer un depuis un live cd et essayer de booter pour voir le résultat. Quelqu'un a-t-il un xorg.conf fonctionnel à poster que je puisse le copier ou une autre idée ?

Merci.

Dernière modification par fcn50 (Le 28/11/2014, à 09:22)

ArchangeGabriel · Le 28/11/2014, à 10:58

Que donne lspci quand tu arrives dans un TTY ? Est-ce que la carte Intel est encore là ?

Est-ce que tu penses pouvoir copier dmesg et /var/log/Xorg.0.log ici ?

Ne pas avoir de xorg.conf c’est normal. Là le problème à mon avis c’est que l’installation des différents paquets s’est faite sans la carte, et ça n’est pas prévu, car certaines parties de la configuration en dépendent.

Du coup si c’est bien la carte Intel qui reste utilisée, je serais pour purger tous les paquets nvidia et bumblebee, redémarrer voir si ça change des choses, puis réinstaller ces paquets.

F50 · Le 28/11/2014, à 12:57

Pour lspci, je n'ai pas tenté depuis une tty mais je ferai pour voir. La carte Intel est de toute façon toujours là (elle l'a toujours été ici), non ?

Tu confirmes avec nividia installé il ne se créer pas de xorg.conf ? Sur AMD il y en a toujours un mais je connais pas Nvidia.

Avant l'install de Nvidia, j'avais vérifié lspci et la GT750M y était bien. De toute façon je n'ai pas le choix que de faire un -purge nivdia* sinon je ne pourrai pas booter normalement.

Pour la copie de dmesg et /var/log/Xorg.0.log depuis un tty en mode dépannage, je vois pas comment mais après purge nvidia* et reboot, pas de soucis.

J'ai lu sur la doc Arch que bumblebee éteignait la carte dédiée pendant le shutdown et je me demande si c'est pas un problème car j'ai lu sur un forum w$ qu'il y a comme une couille sur ces Alienware et certains on du installé le pilote nvidia (pour w$) puis rebooter et allez trafiquer dans les devices (w$) pour mettre en branle cet oignon qui n'était pas détecté. Certains autres, on enlevé la batterie quelques minutes puis presser le bouton power on, enfin un sac de noeuds semble-t-il...

J'avais déjà au premier boot de la machine, remarqué des erreur concernant le BIOS dans syslog et d'après red hat c'est une mauvaise implémentation de périphérique par les constructeurs, en un mot > du boulot de merde ! M'enfin...

Après le casse-croûte je remet le bouseux en branle et poste le résultat des courses.

Merci pour ton aide ArchangeGabriel. Je débute sous Nvidia, en plus le portable est neuf et je le connais pas dans les recoins.

F50 · Le 28/11/2014, à 14:45

Me vlà sur le bouseux boiteux après une xième purge (nvidia current > 304). Avant cela : Boot en mode dépannage > lspci -v > les deux cartes sont présentent, startx et Xorg.0.log même constat qu'au #16. Puis purge la salade et voici le résultat après reboot sur buntu :

lspci -v :

lspci -v
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: d0000000-d1ffffff
	Prefetchable memory behind bridge: 00000000a0000000-00000000bfffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 45
	Memory at d2000000 (64-bit, non-prefetchable) [size=4M]
	Memory at c0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 5000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 48
	Memory at d2610000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0, IRQ 41
	Memory at d2600000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 44
	Memory at d2618000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0, IRQ 16
	Memory at d261d000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 47
	Memory at d2614000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 9fb00000-9fcfffff
	Prefetchable memory behind bridge: 000000009fd00000-000000009fefffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d2500000-d25fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	Memory behind bridge: d2400000-d24fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0, IRQ 19
	Memory at d261c000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Device 05a9
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 43
	I/O ports at 5088 [size=8]
	I/O ports at 5094 [size=4]
	I/O ports at 5080 [size=8]
	I/O ports at 5090 [size=4]
	I/O ports at 5060 [size=32]
	Memory at d261b000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
	Subsystem: Dell Device 05a9
	Flags: medium devsel
	Memory at d2619000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 5040 [size=32]

01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 49
	Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
	Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Memory at b0000000 (64-bit, prefetchable) [size=32M]
	I/O ports at 4000 [size=128]
	Expansion ROM at b2000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

08:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 10)
	Subsystem: Dell Device 05ac
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at d2500000 (64-bit, non-prefetchable) [size=256K]
	I/O ports at 3000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: alx

09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
	Subsystem: Dell Device 05ac
	Flags: bus master, fast devsel, latency 0, IRQ 42
	Memory at d2401000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci

09:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
	Subsystem: Dell Device 05ac
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at d2400000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

Syslog :

11-28 13:20 kernel: [    0.000000] CPU0 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:20 kernel: [    0.000000] Initializing cgroup subsys cpuset
11-28 13:20 kernel: [    0.000000] Initializing cgroup subsys cpu
11-28 13:20 kernel: [    0.000000] Initializing cgroup subsys cpuacct
11-28 13:20 kernel: [    0.000000] Linux version 3.13.0-40-generic (buildd@comet) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #69-Ubuntu SMP Thu Nov 13 17:53:56 UTC 2014 (Ubuntu 3.13.0-40.69-generic 3.13.11.10)
11-28 13:20 kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=b34a3bf5-e23c-481a-af72-adb5f2ac8a2c ro recovery nomodeset
11-28 13:20 kernel: [    0.000000] KERNEL supported cpus:
11-28 13:20 kernel: [    0.000000]   Intel GenuineIntel
11-28 13:20 kernel: [    0.000000]   AMD AuthenticAMD
11-28 13:20 kernel: [    0.000000]   Centaur CentaurHauls
11-28 13:20 kernel: [    0.000000] e820: BIOS-provided physical RAM map:
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d6ffff] usable
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x0000000094d70000-0x0000000095d6ffff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x0000000095d70000-0x000000009a37efff] usable
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x000000009a37f000-0x000000009a57efff] type 20
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x000000009a57f000-0x000000009ae7efff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x000000009ae7f000-0x000000009af7efff] ACPI NVS
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x000000009af7f000-0x000000009affefff] ACPI data
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
11-28 13:20 kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
11-28 13:20 kernel: [    0.000000] NX (Execute Disable) protection: active
11-28 13:20 kernel: [    0.000000] efi: EFI v2.31 by INSYDE Corp.
11-28 13:20 kernel: [    0.000000] efi:  ACPI=0x9affe000  ACPI 2.0=0x9affe014  SMBIOS=0x9ae7ef98 
11-28 13:20 kernel: [    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001503000) (20MB)
11-28 13:20 kernel: [    0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001503000-0x0000000002000000) (10MB)
11-28 13:20 kernel: [    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003403000) (20MB)
11-28 13:20 kernel: [    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000003403000-0x0000000035b08000) (807MB)
11-28 13:20 kernel: [    0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000035b08000-0x0000000036d7c000) (18MB)
11-28 13:20 kernel: [    0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000036d7c000-0x000000006dc08000) (878MB)
11-28 13:20 kernel: [    0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000006dc08000-0x0000000092d80000) (593MB)
11-28 13:20 kernel: [    0.000000] efi: mem12: type=4, attr=0xf, range=[0x0000000092d80000-0x0000000092da0000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000092da0000-0x0000000093d15000) (15MB)
11-28 13:20 kernel: [    0.000000] efi: mem14: type=2, attr=0xf, range=[0x0000000093d15000-0x0000000093ee9000) (1MB)
11-28 13:20 kernel: [    0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000093ee9000-0x0000000094d70000) (14MB)
11-28 13:20 kernel: [    0.000000] efi: mem16: type=0, attr=0xf, range=[0x0000000094d70000-0x0000000095d70000) (16MB)
11-28 13:20 kernel: [    0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000095d70000-0x0000000095d7d000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem18: type=2, attr=0xf, range=[0x0000000095d7d000-0x0000000095d7f000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000095d7f000-0x0000000095e4b000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem20: type=1, attr=0xf, range=[0x0000000095e4b000-0x0000000095f7f000) (1MB)
11-28 13:20 kernel: [    0.000000] efi: mem21: type=7, attr=0xf, range=[0x0000000095f7f000-0x000000009686a000) (8MB)
11-28 13:20 kernel: [    0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000009686a000-0x0000000096872000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem23: type=7, attr=0xf, range=[0x0000000096872000-0x000000009688c000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem24: type=2, attr=0xf, range=[0x000000009688c000-0x0000000096896000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000096896000-0x000000009697c000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009697c000-0x000000009697d000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000009697d000-0x0000000096a05000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem28: type=3, attr=0xf, range=[0x0000000096a05000-0x0000000096a07000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000096a07000-0x0000000096a1f000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem30: type=7, attr=0xf, range=[0x0000000096a1f000-0x0000000096a20000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000096a20000-0x0000000097c45000) (18MB)
11-28 13:20 kernel: [    0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000097c45000-0x0000000097c46000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000097c46000-0x0000000097c4a000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000097c4a000-0x0000000097c4d000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000097c4d000-0x0000000097c56000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000097c56000-0x0000000097c58000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000097c58000-0x0000000097de1000) (1MB)
11-28 13:20 kernel: [    0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000097de1000-0x0000000097dee000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000097dee000-0x0000000097dfb000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000097dfb000-0x0000000097dfe000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000097dfe000-0x0000000097e05000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem42: type=3, attr=0xf, range=[0x0000000097e05000-0x0000000097e14000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000097e14000-0x0000000097e31000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem44: type=3, attr=0xf, range=[0x0000000097e31000-0x0000000097e37000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000097e37000-0x0000000097e3c000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000097e3c000-0x0000000097e3e000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000097e3e000-0x0000000097e53000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000097e53000-0x0000000097ece000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000097ece000-0x0000000099f7f000) (32MB)
11-28 13:20 kernel: [    0.000000] efi: mem50: type=3, attr=0xf, range=[0x0000000099f7f000-0x000000009a37f000) (4MB)
11-28 13:20 kernel: [    0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x000000009a37f000-0x000000009a57f000) (2MB)
11-28 13:20 kernel: [    0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x000000009a57f000-0x000000009a77f000) (2MB)
11-28 13:20 kernel: [    0.000000] efi: mem53: type=0, attr=0xf, range=[0x000000009a77f000-0x000000009ae7f000) (7MB)
11-28 13:20 kernel: [    0.000000] efi: mem54: type=10, attr=0xf, range=[0x000000009ae7f000-0x000000009af7f000) (1MB)
11-28 13:20 kernel: [    0.000000] efi: mem55: type=9, attr=0xf, range=[0x000000009af7f000-0x000000009afff000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem57: type=7, attr=0xf, range=[0x0000000100000000-0x000000025f600000) (5622MB)
11-28 13:20 kernel: [    0.000000] efi: mem58: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem59: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
11-28 13:20 kernel: [    0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
11-28 13:20 kernel: [    0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem64: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
11-28 13:20 kernel: [    0.000000] efi: mem66: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
11-28 13:20 kernel: [    0.000000] SMBIOS 2.7 present.
11-28 13:20 kernel: [    0.000000] DMI: Alienware Alienware 14/07MJ2Y, BIOS A09 04/23/2014
11-28 13:20 kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
11-28 13:20 kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
11-28 13:20 kernel: [    0.000000] No AGP bridge found
11-28 13:20 kernel: [    0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
11-28 13:20 kernel: [    0.000000] MTRR default type: uncachable
11-28 13:20 kernel: [    0.000000] MTRR fixed ranges enabled:
11-28 13:20 kernel: [    0.000000]   00000-9FFFF write-back
11-28 13:20 kernel: [    0.000000]   A0000-BFFFF uncachable
11-28 13:20 kernel: [    0.000000]   C0000-E7FFF write-protect
11-28 13:20 kernel: [    0.000000]   E8000-EFFFF write-combining
11-28 13:20 kernel: [    0.000000]   F0000-FFFFF write-protect
11-28 13:20 kernel: [    0.000000] MTRR variable ranges enabled:
11-28 13:20 kernel: [    0.000000]   0 base 0000000000 mask 7F80000000 write-back
11-28 13:20 kernel: [    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
11-28 13:20 kernel: [    0.000000]   2 base 009B000000 mask 7FFF000000 uncachable
11-28 13:20 kernel: [    0.000000]   3 base 009C000000 mask 7FFC000000 uncachable
11-28 13:20 kernel: [    0.000000]   4 base 00FFC00000 mask 7FFFC00000 write-protect
11-28 13:20 kernel: [    0.000000]   5 base 0100000000 mask 7F00000000 write-back
11-28 13:20 kernel: [    0.000000]   6 base 0200000000 mask 7F80000000 write-back
11-28 13:20 kernel: [    0.000000]   7 base 025F600000 mask 7FFFE00000 uncachable
11-28 13:20 kernel: [    0.000000]   8 base 025F800000 mask 7FFF800000 uncachable
11-28 13:20 kernel: [    0.000000]   9 base 0260000000 mask 7FE0000000 uncachable
11-28 13:20 kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
11-28 13:20 kernel: [    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
11-28 13:20 kernel: [    0.000000] Scanning 1 areas for low memory corruption
11-28 13:20 kernel: [    0.000000] Base memory trampoline at [ffff88000007e000] 7e000 size 24576
11-28 13:20 kernel: [    0.000000] Using GB pages for direct mapping
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
11-28 13:20 kernel: [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
11-28 13:20 kernel: [    0.000000] BRK [0x02fe1000, 0x02fe1fff] PGTABLE
11-28 13:20 kernel: [    0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE
11-28 13:20 kernel: [    0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
11-28 13:20 kernel: [    0.000000]  [mem 0x25f400000-0x25f5fffff] page 2M
11-28 13:20 kernel: [    0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
11-28 13:20 kernel: [    0.000000]  [mem 0x25c000000-0x25f3fffff] page 2M
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
11-28 13:20 kernel: [    0.000000]  [mem 0x200000000-0x23fffffff] page 1G
11-28 13:20 kernel: [    0.000000]  [mem 0x240000000-0x25bffffff] page 2M
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x00100000-0x94d6ffff]
11-28 13:20 kernel: [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
11-28 13:20 kernel: [    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
11-28 13:20 kernel: [    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
11-28 13:20 kernel: [    0.000000]  [mem 0x80000000-0x94bfffff] page 2M
11-28 13:20 kernel: [    0.000000]  [mem 0x94c00000-0x94d6ffff] page 4k
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x95d70000-0x9a37efff]
11-28 13:20 kernel: [    0.000000]  [mem 0x95d70000-0x95dfffff] page 4k
11-28 13:20 kernel: [    0.000000]  [mem 0x95e00000-0x9a1fffff] page 2M
11-28 13:20 kernel: [    0.000000]  [mem 0x9a200000-0x9a37efff] page 4k
11-28 13:20 kernel: [    0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE
11-28 13:20 kernel: [    0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
11-28 13:20 kernel: [    0.000000]  [mem 0x9afff000-0x9affffff] page 4k
11-28 13:20 kernel: [    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
11-28 13:20 kernel: [    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
11-28 13:20 kernel: [    0.000000] RAMDISK: [mem 0x35b08000-0x36d7bfff]
11-28 13:20 kernel: [    0.000000] ACPI: RSDP 000000009affe014 000024 (v02 ALWARE)
11-28 13:20 kernel: [    0.000000] ACPI: XSDT 000000009affe210 0000CC (v01 ALWARE ALIENWRE 00000001      01000013)
11-28 13:20 kernel: [    0.000000] ACPI: FACP 000000009aff7000 00010C (v05 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: DSDT 000000009afe8000 00BD9D (v01 ALWARE ALIENWRE 00000000 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: FACS 000000009af77000 000040
11-28 13:20 kernel: [    0.000000] ACPI: SLIC 000000009affd000 000176 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: UEFI 000000009affc000 000236 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: FPDT 000000009affa000 000044 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: MSDM 000000009aff9000 000055 (v03 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: ASF! 000000009aff8000 0000A5 (v32 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: HPET 000000009aff6000 000038 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: APIC 000000009aff5000 00008C (v03 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: MCFG 000000009aff4000 00003C (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: SSDT 000000009afe7000 000818 (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
11-28 13:20 kernel: [    0.000000] ACPI: BOOT 000000009afe5000 000028 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: SSDT 000000009afe4000 00029D (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
11-28 13:20 kernel: [    0.000000] ACPI: ASPT 000000009afe3000 000034 (v07 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: DBGP 000000009afe2000 000034 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: SSDT 000000009afdb000 000539 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
11-28 13:20 kernel: [    0.000000] ACPI: SSDT 000000009afda000 000AD8 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
11-28 13:20 kernel: [    0.000000] ACPI: SSDT 000000009afd6000 003276 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
11-28 13:20 kernel: [    0.000000] ACPI: SSDT 000000009afcf000 003B89 (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
11-28 13:20 kernel: [    0.000000] ACPI: WDTT 000000009afd5000 000224 (v02 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: DMAR 000000009afd3000 000090 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: BGRT 000000009afd4000 000038 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:20 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
11-28 13:20 kernel: [    0.000000] No NUMA configuration found
11-28 13:20 kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
11-28 13:20 kernel: [    0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
11-28 13:20 kernel: [    0.000000]   NODE_DATA [mem 0x25f5f8000-0x25f5fcfff]
11-28 13:20 kernel: [    0.000000]  [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
11-28 13:20 kernel: [    0.000000] Zone ranges:
11-28 13:20 kernel: [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
11-28 13:20 kernel: [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
11-28 13:20 kernel: [    0.000000]   Normal   [mem 0x100000000-0x25f5fffff]
11-28 13:20 kernel: [    0.000000] Movable zone start for each node
11-28 13:20 kernel: [    0.000000] Early memory node ranges
11-28 13:20 kernel: [    0.000000]   node   0: [mem 0x00001000-0x0006efff]
11-28 13:20 kernel: [    0.000000]   node   0: [mem 0x00070000-0x00087fff]
11-28 13:20 kernel: [    0.000000]   node   0: [mem 0x00100000-0x94d6ffff]
11-28 13:20 kernel: [    0.000000]   node   0: [mem 0x95d70000-0x9a37efff]
11-28 13:20 kernel: [    0.000000]   node   0: [mem 0x9afff000-0x9affffff]
11-28 13:20 kernel: [    0.000000]   node   0: [mem 0x100000000-0x25f5fffff]
11-28 13:20 kernel: [    0.000000] On node 0 totalpages: 2066694
11-28 13:20 kernel: [    0.000000]   DMA zone: 64 pages used for memmap
11-28 13:20 kernel: [    0.000000]   DMA zone: 22 pages reserved
11-28 13:20 kernel: [    0.000000]   DMA zone: 3974 pages, LIFO batch:0
11-28 13:20 kernel: [    0.000000]   DMA32 zone: 9742 pages used for memmap
11-28 13:20 kernel: [    0.000000]   DMA32 zone: 623488 pages, LIFO batch:31
11-28 13:20 kernel: [    0.000000]   Normal zone: 22488 pages used for memmap
11-28 13:20 kernel: [    0.000000]   Normal zone: 1439232 pages, LIFO batch:31
11-28 13:20 kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1808
11-28 13:20 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
11-28 13:20 kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
11-28 13:20 kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
11-28 13:20 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
11-28 13:20 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
11-28 13:20 kernel: [    0.000000] ACPI: IRQ0 used by override.
11-28 13:20 kernel: [    0.000000] ACPI: IRQ2 used by override.
11-28 13:20 kernel: [    0.000000] ACPI: IRQ9 used by override.
11-28 13:20 kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
11-28 13:20 kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
11-28 13:20 kernel: [    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
11-28 13:20 kernel: [    0.000000] nr_irqs_gsi: 40
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x94d70000-0x95d6ffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9a37f000-0x9a57efff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9a57f000-0x9ae7efff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9ae7f000-0x9af7efff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9af7f000-0x9affefff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
11-28 13:20 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
11-28 13:20 kernel: [    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
11-28 13:20 kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
11-28 13:20 kernel: [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
11-28 13:20 kernel: [    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86400 r8192 d24192 u262144
11-28 13:20 kernel: [    0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
11-28 13:20 kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
11-28 13:20 kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2034378
11-28 13:20 kernel: [    0.000000] Policy zone: Normal
11-28 13:20 kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=b34a3bf5-e23c-481a-af72-adb5f2ac8a2c ro recovery nomodeset
11-28 13:20 kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
11-28 13:20 kernel: [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
11-28 13:20 kernel: [    0.000000] Checking aperture...
11-28 13:20 kernel: [    0.000000] No AGP bridge found
11-28 13:20 kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
11-28 13:20 kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
11-28 13:20 kernel: [    0.000000] ------------[ cut here ]------------
11-28 13:20 kernel: [    0.000000] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
11-28 13:20 kernel: [    0.000000] Your BIOS is broken; DMAR reported at address 0!
11-28 13:20 kernel: [    0.000000] BIOS vendor: Alienware; Ver: A09; Product Version: A09
11-28 13:20 kernel: [    0.000000] Modules linked in:
11-28 13:20 kernel: [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-40-generic #69-Ubuntu
11-28 13:20 kernel: [    0.000000] Hardware name: Alienware Alienware 14/07MJ2Y, BIOS A09 04/23/2014
11-28 13:20 kernel: [    0.000000]  000000000000000b ffffffff81c01de8 ffffffff8171f226 ffffffff81c01e30
11-28 13:20 kernel: [    0.000000]  ffffffff81c01e20 ffffffff810677cd ffffffff81fe000c ffffffff81fe0038
11-28 13:20 kernel: [    0.000000]  0000000000000000 ffffffff81de22c0 ffffffff81c01fb0 ffffffff81c01e80
11-28 13:20 kernel: [    0.000000] Call Trace:
11-28 13:20 kernel: [    0.000000]  [<ffffffff8171f226>] dump_stack+0x45/0x56
11-28 13:20 kernel: [    0.000000]  [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
11-28 13:20 kernel: [    0.000000]  [<ffffffff81067884>] warn_slowpath_fmt_taint+0x44/0x50
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d5135d>] ? early_ioremap+0x13/0x15
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d46f7f>] ? __acpi_map_table+0x13/0x18
11-28 13:20 kernel: [    0.000000]  [<ffffffff815f5d8e>] warn_invalid_dmar+0x7e/0x90
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d8bdfa>] check_zero_address+0x68/0xf4
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d8be9b>] detect_intel_iommu+0x15/0xae
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d41072>] pci_iommu_alloc+0x4a/0x6c
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d50cfa>] mem_init+0x17/0x9c
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d36d3a>] start_kernel+0x202/0x443
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d36941>] ? repair_env_string+0x5c/0x5c
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d36120>] ? early_idt_handlers+0x120/0x120
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d365ee>] x86_64_start_reservations+0x2a/0x2c
11-28 13:20 kernel: [    0.000000]  [<ffffffff81d36733>] x86_64_start_kernel+0x143/0x152
11-28 13:20 kernel: [    0.000000] ---[ end trace 2c6648877d2f3fb8 ]---
11-28 13:20 kernel: [    0.000000] Memory: 7957852K/8266776K available (7376K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 308924K reserved)
11-28 13:20 kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
11-28 13:20 kernel: [    0.000000] Hierarchical RCU implementation.
11-28 13:20 kernel: [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
11-28 13:20 kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
11-28 13:20 kernel: [    0.000000] 	Offload RCU callbacks from all CPUs
11-28 13:20 kernel: [    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
11-28 13:20 kernel: [    0.000000] NR_IRQS:16640 nr_irqs:744 16
11-28 13:20 kernel: [    0.000000] Console: colour dummy device 80x25
11-28 13:20 kernel: [    0.000000] console [tty0] enabled
11-28 13:20 kernel: [    0.000000] allocated 33554432 bytes of page_cgroup
11-28 13:20 kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
11-28 13:20 kernel: [    0.000000] hpet clockevent registered
11-28 13:20 kernel: [    0.000000] tsc: Fast TSC calibration using PIT
11-28 13:20 kernel: [    0.004000] tsc: Detected 2494.019 MHz processor
11-28 13:20 kernel: [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.03 BogoMIPS (lpj=9976076)
11-28 13:20 kernel: [    0.000007] pid_max: default: 32768 minimum: 301
11-28 13:20 kernel: [    0.016915] Security Framework initialized
11-28 13:20 kernel: [    0.016935] AppArmor: AppArmor initialized
11-28 13:20 kernel: [    0.016937] Yama: becoming mindful.
11-28 13:20 kernel: [    0.017414] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
11-28 13:20 kernel: [    0.018808] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
11-28 13:20 kernel: [    0.019401] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
11-28 13:20 kernel: [    0.019411] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
11-28 13:20 kernel: [    0.019587] Initializing cgroup subsys memory
11-28 13:20 kernel: [    0.019593] Initializing cgroup subsys devices
11-28 13:20 kernel: [    0.019596] Initializing cgroup subsys freezer
11-28 13:20 kernel: [    0.019598] Initializing cgroup subsys blkio
11-28 13:20 kernel: [    0.019600] Initializing cgroup subsys perf_event
11-28 13:20 kernel: [    0.019603] Initializing cgroup subsys hugetlb
11-28 13:20 kernel: [    0.019622] CPU: Physical Processor ID: 0
11-28 13:20 kernel: [    0.019623] CPU: Processor Core ID: 0
11-28 13:20 kernel: [    0.019628] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
11-28 13:20 kernel: [    0.019628] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
11-28 13:20 kernel: [    0.020508] mce: CPU supports 9 MCE banks
11-28 13:20 kernel: [    0.020522] CPU0: Thermal monitoring enabled (TM1)
11-28 13:20 kernel: [    0.020534] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
11-28 13:20 kernel: [    0.020534] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
11-28 13:20 kernel: [    0.020534] tlb_flushall_shift: 6
11-28 13:20 kernel: [    0.020633] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
11-28 13:20 kernel: [    0.021502] ACPI: Core revision 20131115
11-28 13:20 kernel: [    0.029543] ACPI: All ACPI Tables successfully acquired
11-28 13:20 kernel: [    0.033592] ftrace: allocating 28542 entries in 112 pages
11-28 13:20 kernel: [    0.044728] dmar: Host address width 39
11-28 13:20 kernel: [    0.044731] dmar: DRHD base: 0x00000000000000 flags: 0x1
11-28 13:20 kernel: [    0.044733] dmar: parse DMAR table failure.
11-28 13:20 kernel: [    0.045128] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
11-28 13:20 kernel: [    0.084852] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
11-28 13:20 kernel: [    0.084860] TSC deadline timer enabled
11-28 13:20 kernel: [    0.084868] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
11-28 13:20 kernel: [    0.084875] ... version:                3
11-28 13:20 kernel: [    0.084876] ... bit width:              48
11-28 13:20 kernel: [    0.084877] ... generic registers:      4
11-28 13:20 kernel: [    0.084878] ... value mask:             0000ffffffffffff
11-28 13:20 kernel: [    0.084880] ... max period:             0000ffffffffffff
11-28 13:20 kernel: [    0.084881] ... fixed-purpose events:   3
11-28 13:20 kernel: [    0.084882] ... event mask:             000000070000000f
11-28 13:20 kernel: [    0.086248] x86: Booting SMP configuration:
11-28 13:20 kernel: [    0.100467] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
11-28 13:20 kernel: [    0.111926] CPU2 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:20 kernel: [    0.140643] CPU4 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:20 kernel: [    0.169453] CPU6 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:20 kernel: [    0.086250] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
11-28 13:20 kernel: [    0.186812] x86: Booted up 1 node, 8 CPUs
11-28 13:20 kernel: [    0.186816] smpboot: Total of 8 processors activated (39904.30 BogoMIPS)
11-28 13:20 kernel: [    0.193990] devtmpfs: initialized
11-28 13:20 kernel: [    0.195723] EVM: security.selinux
11-28 13:20 kernel: [    0.195725] EVM: security.SMACK64
11-28 13:20 kernel: [    0.195726] EVM: security.ima
11-28 13:20 kernel: [    0.195727] EVM: security.capability
11-28 13:20 kernel: [    0.195760] PM: Registering ACPI NVS region [mem 0x9ae7f000-0x9af7efff] (1048576 bytes)
11-28 13:20 kernel: [    0.196388] pinctrl core: initialized pinctrl subsystem
11-28 13:20 kernel: [    0.196436] regulator-dummy: no parameters
11-28 13:20 kernel: [    0.196464] RTC time: 12:19:49, date: 11/28/14
11-28 13:20 kernel: [    0.196491] NET: Registered protocol family 16
11-28 13:20 kernel: [    0.196568] cpuidle: using governor ladder
11-28 13:20 kernel: [    0.196569] cpuidle: using governor menu
11-28 13:20 kernel: [    0.196599] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
11-28 13:20 kernel: [    0.196601] ACPI: bus type PCI registered
11-28 13:20 kernel: [    0.196603] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
11-28 13:20 kernel: [    0.196651] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
11-28 13:20 kernel: [    0.196654] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
11-28 13:20 kernel: [    0.218914] PCI: Using configuration type 1 for base access
11-28 13:20 kernel: [    0.219699] bio: create slab <bio-0> at 0
11-28 13:20 kernel: [    0.219826] ACPI: Added _OSI(Module Device)
11-28 13:20 kernel: [    0.219828] ACPI: Added _OSI(Processor Device)
11-28 13:20 kernel: [    0.219830] ACPI: Added _OSI(3.0 _SCP Extensions)
11-28 13:20 kernel: [    0.219831] ACPI: Added _OSI(Processor Aggregator Device)
11-28 13:20 kernel: [    0.223119] ACPI: Executed 1 blocks of module-level executable AML code
11-28 13:20 kernel: [    0.225609] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
11-28 13:20 kernel: [    0.226662] ACPI: SSDT 000000009ae21c18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20130117)
11-28 13:20 kernel: [    0.227081] ACPI: Dynamic OEM Table Load:
11-28 13:20 kernel: [    0.227083] ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20130117)
11-28 13:20 kernel: [    0.230068] ACPI: SSDT 000000009ae21618 0005AA (v01  PmRef    ApIst 00003000 INTL 20130117)
11-28 13:20 kernel: [    0.230550] ACPI: Dynamic OEM Table Load:
11-28 13:20 kernel: [    0.230553] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20130117)
11-28 13:20 kernel: [    0.233927] ACPI: SSDT 000000009ae19d98 000119 (v01  PmRef    ApCst 00003000 INTL 20130117)
11-28 13:20 kernel: [    0.234343] ACPI: Dynamic OEM Table Load:
11-28 13:20 kernel: [    0.234345] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20130117)
11-28 13:20 kernel: [    0.382113] ACPI: Interpreter enabled
11-28 13:20 kernel: [    0.382121] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
11-28 13:20 kernel: [    0.382127] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
11-28 13:20 kernel: [    0.382142] ACPI: (supports S0 S3 S4 S5)
11-28 13:20 kernel: [    0.382143] ACPI: Using IOAPIC for interrupt routing
11-28 13:20 kernel: [    0.382166] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
11-28 13:20 kernel: [    0.382327] ACPI: No dock devices found.
11-28 13:20 kernel: [    0.605119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
11-28 13:20 kernel: [    0.605125] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
11-28 13:20 kernel: [    0.605420] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
11-28 13:20 kernel: [    0.605591] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
11-28 13:20 kernel: [    0.605594] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
11-28 13:20 kernel: [    0.605597] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
11-28 13:20 kernel: [    0.605599] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
11-28 13:20 kernel: [    0.606033] PCI host bridge to bus 0000:00
11-28 13:20 kernel: [    0.606036] pci_bus 0000:00: root bus resource [bus 00-fe]
11-28 13:20 kernel: [    0.606038] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
11-28 13:20 kernel: [    0.606040] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
11-28 13:20 kernel: [    0.606042] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
11-28 13:20 kernel: [    0.606044] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
11-28 13:20 kernel: [    0.606046] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
11-28 13:20 kernel: [    0.606048] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
11-28 13:20 kernel: [    0.606050] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
11-28 13:20 kernel: [    0.606051] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
11-28 13:20 kernel: [    0.606053] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
11-28 13:20 kernel: [    0.606055] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
11-28 13:20 kernel: [    0.606057] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
11-28 13:20 kernel: [    0.606059] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
11-28 13:20 kernel: [    0.606061] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
11-28 13:20 kernel: [    0.606062] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
11-28 13:20 kernel: [    0.606064] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
11-28 13:20 kernel: [    0.606066] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
11-28 13:20 kernel: [    0.606068] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
11-28 13:20 kernel: [    0.606075] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
11-28 13:20 kernel: [    0.606192] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
11-28 13:20 kernel: [    0.606222] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.606311] pci 0000:00:01.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.606339] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
11-28 13:20 kernel: [    0.606349] pci 0000:00:02.0: reg 0x10: [mem 0xd2000000-0xd23fffff 64bit]
11-28 13:20 kernel: [    0.606355] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
11-28 13:20 kernel: [    0.606359] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
11-28 13:20 kernel: [    0.606468] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
11-28 13:20 kernel: [    0.606478] pci 0000:00:03.0: reg 0x10: [mem 0xd2610000-0xd2613fff 64bit]
11-28 13:20 kernel: [    0.606613] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
11-28 13:20 kernel: [    0.606632] pci 0000:00:14.0: reg 0x10: [mem 0xd2600000-0xd260ffff 64bit]
11-28 13:20 kernel: [    0.606690] pci 0000:00:14.0: PME# supported from D3hot D3cold
11-28 13:20 kernel: [    0.606781] pci 0000:00:14.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.606807] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
11-28 13:20 kernel: [    0.606826] pci 0000:00:16.0: reg 0x10: [mem 0xd2618000-0xd261800f 64bit]
11-28 13:20 kernel: [    0.606887] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.606999] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
11-28 13:20 kernel: [    0.607018] pci 0000:00:1a.0: reg 0x10: [mem 0xd261d000-0xd261d3ff]
11-28 13:20 kernel: [    0.607102] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.607194] pci 0000:00:1a.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.607222] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
11-28 13:20 kernel: [    0.607235] pci 0000:00:1b.0: reg 0x10: [mem 0xd2614000-0xd2617fff 64bit]
11-28 13:20 kernel: [    0.607296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.607379] pci 0000:00:1b.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.607403] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
11-28 13:20 kernel: [    0.607465] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.607548] pci 0000:00:1c.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.607572] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
11-28 13:20 kernel: [    0.607634] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.607728] pci 0000:00:1c.2: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.607752] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
11-28 13:20 kernel: [    0.607814] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.607897] pci 0000:00:1c.3: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.607929] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
11-28 13:20 kernel: [    0.607950] pci 0000:00:1d.0: reg 0x10: [mem 0xd261c000-0xd261c3ff]
11-28 13:20 kernel: [    0.608034] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
11-28 13:20 kernel: [    0.608126] pci 0000:00:1d.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.608153] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
11-28 13:20 kernel: [    0.608348] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
11-28 13:20 kernel: [    0.608363] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
11-28 13:20 kernel: [    0.608371] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
11-28 13:20 kernel: [    0.608378] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
11-28 13:20 kernel: [    0.608385] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
11-28 13:20 kernel: [    0.608393] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
11-28 13:20 kernel: [    0.608400] pci 0000:00:1f.2: reg 0x24: [mem 0xd261b000-0xd261b7ff]
11-28 13:20 kernel: [    0.608435] pci 0000:00:1f.2: PME# supported from D3hot
11-28 13:20 kernel: [    0.608532] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
11-28 13:20 kernel: [    0.608547] pci 0000:00:1f.3: reg 0x10: [mem 0xd2619000-0xd26190ff 64bit]
11-28 13:20 kernel: [    0.608567] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
11-28 13:20 kernel: [    0.608718] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030000
11-28 13:20 kernel: [    0.608731] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
11-28 13:20 kernel: [    0.608745] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
11-28 13:20 kernel: [    0.608758] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
11-28 13:20 kernel: [    0.608767] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
11-28 13:20 kernel: [    0.608776] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
11-28 13:20 kernel: [    0.608841] pci 0000:01:00.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.614496] pci 0000:00:01.0: PCI bridge to [bus 01-06]
11-28 13:20 kernel: [    0.614499] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
11-28 13:20 kernel: [    0.614501] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd1ffffff]
11-28 13:20 kernel: [    0.614504] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
11-28 13:20 kernel: [    0.614554] pci 0000:00:1c.0: PCI bridge to [bus 07]
11-28 13:20 kernel: [    0.614817] pci 0000:08:00.0: [1969:e091] type 00 class 0x020000
11-28 13:20 kernel: [    0.614986] pci 0000:08:00.0: reg 0x10: [mem 0xd2500000-0xd253ffff 64bit]
11-28 13:20 kernel: [    0.615162] pci 0000:08:00.0: reg 0x18: [io  0x3000-0x307f]
11-28 13:20 kernel: [    0.616418] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
11-28 13:20 kernel: [    0.616705] pci 0000:08:00.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.622538] pci 0000:00:1c.2: PCI bridge to [bus 08]
11-28 13:20 kernel: [    0.622543] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
11-28 13:20 kernel: [    0.622546] pci 0000:00:1c.2:   bridge window [mem 0xd2500000-0xd25fffff]
11-28 13:20 kernel: [    0.622620] pci 0000:09:00.0: [10ec:5209] type 00 class 0xff0000
11-28 13:20 kernel: [    0.622638] pci 0000:09:00.0: reg 0x10: [mem 0xd2401000-0xd2401fff]
11-28 13:20 kernel: [    0.622760] pci 0000:09:00.0: supports D1 D2
11-28 13:20 kernel: [    0.622761] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
11-28 13:20 kernel: [    0.622785] pci 0000:09:00.0: System wakeup disabled by ACPI
11-28 13:20 kernel: [    0.622820] pci 0000:09:00.1: [10ec:5209] type 00 class 0x080500
11-28 13:20 kernel: [    0.622838] pci 0000:09:00.1: reg 0x10: [mem 0xd2400000-0xd24000ff]
11-28 13:20 kernel: [    0.622959] pci 0000:09:00.1: supports D1 D2
11-28 13:20 kernel: [    0.622960] pci 0000:09:00.1: PME# supported from D1 D2 D3hot
11-28 13:20 kernel: [    0.630531] pci 0000:00:1c.3: PCI bridge to [bus 09]
11-28 13:20 kernel: [    0.630537] pci 0000:00:1c.3:   bridge window [mem 0xd2400000-0xd24fffff]
11-28 13:20 kernel: [    0.703125] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703170] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703210] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703247] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703286] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703324] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703362] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703400] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:20 kernel: [    0.703765] ACPI: Enabled 7 GPEs in block 00 to 3F
11-28 13:20 kernel: [    0.703772] ACPI: \_SB_.PCI0: notify handler is installed
11-28 13:20 kernel: [    0.703830] Found 1 acpi root devices
11-28 13:20 kernel: [    0.703855] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
11-28 13:20 kernel: [    0.703925] vgaarb: setting as boot device: PCI:0000:00:02.0
11-28 13:20 kernel: [    0.703927] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
11-28 13:20 kernel: [    0.703932] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
11-28 13:20 kernel: [    0.703934] vgaarb: loaded
11-28 13:20 kernel: [    0.703936] vgaarb: bridge control possible 0000:01:00.0
11-28 13:20 kernel: [    0.703937] vgaarb: no bridge control possible 0000:00:02.0
11-28 13:20 kernel: [    0.704050] SCSI subsystem initialized
11-28 13:20 kernel: [    0.704085] libata version 3.00 loaded.
11-28 13:20 kernel: [    0.704098] ACPI: bus type USB registered
11-28 13:20 kernel: [    0.704111] usbcore: registered new interface driver usbfs
11-28 13:20 kernel: [    0.704117] usbcore: registered new interface driver hub
11-28 13:20 kernel: [    0.704134] usbcore: registered new device driver usb
11-28 13:20 kernel: [    0.704231] PCI: Using ACPI for IRQ routing
11-28 13:20 kernel: [    0.709917] PCI: pci_cache_line_size set to 64 bytes
11-28 13:20 kernel: [    0.710067] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
11-28 13:20 kernel: [    0.710068] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
11-28 13:20 kernel: [    0.710069] e820: reserve RAM buffer [mem 0x94d70000-0x97ffffff]
11-28 13:20 kernel: [    0.710070] e820: reserve RAM buffer [mem 0x9a37f000-0x9bffffff]
11-28 13:20 kernel: [    0.710072] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
11-28 13:20 kernel: [    0.710073] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
11-28 13:20 kernel: [    0.710127] NetLabel: Initializing
11-28 13:20 kernel: [    0.710128] NetLabel:  domain hash size = 128
11-28 13:20 kernel: [    0.710130] NetLabel:  protocols = UNLABELED CIPSOv4
11-28 13:20 kernel: [    0.710139] NetLabel:  unlabeled traffic allowed by default
11-28 13:20 kernel: [    0.710177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
11-28 13:20 kernel: [    0.710182] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
11-28 13:20 kernel: [    0.712214] Switched to clocksource hpet
11-28 13:20 kernel: [    0.715648] AppArmor: AppArmor Filesystem Enabled
11-28 13:20 kernel: [    0.715664] pnp: PnP ACPI init
11-28 13:20 kernel: [    0.715672] ACPI: bus type PNP registered
11-28 13:20 kernel: [    0.715698] pnp 00:00: [dma 4]
11-28 13:20 kernel: [    0.715711] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
11-28 13:20 kernel: [    0.715725] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
11-28 13:20 kernel: [    0.715806] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
11-28 13:20 kernel: [    0.715840] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
11-28 13:20 kernel: [    0.715873] system 00:04: [io  0x0680-0x069f] has been reserved
11-28 13:20 kernel: [    0.715876] system 00:04: [io  0xffff] has been reserved
11-28 13:20 kernel: [    0.715878] system 00:04: [io  0xffff] has been reserved
11-28 13:20 kernel: [    0.715879] system 00:04: [io  0xffff] has been reserved
11-28 13:20 kernel: [    0.715881] system 00:04: [io  0x0400-0x0453] has been reserved
11-28 13:20 kernel: [    0.715883] system 00:04: [io  0x0800-0x08fe] has been reserved
11-28 13:20 kernel: [    0.715885] system 00:04: [io  0x0900-0x09fe] has been reserved
11-28 13:20 kernel: [    0.715887] system 00:04: [io  0x0a00-0x0afe] has been reserved
11-28 13:20 kernel: [    0.715889] system 00:04: [io  0x0b00-0x0bfe] has been reserved
11-28 13:20 kernel: [    0.715892] system 00:04: [io  0x1800-0x18fe] could not be reserved
11-28 13:20 kernel: [    0.715894] system 00:04: [io  0x164e-0x164f] has been reserved
11-28 13:20 kernel: [    0.715895] system 00:04: [io  0xfd60-0xfd63] has been reserved
11-28 13:20 kernel: [    0.715898] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
11-28 13:20 kernel: [    0.715914] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
11-28 13:20 kernel: [    0.715945] system 00:06: [io  0x1854-0x1857] has been reserved
11-28 13:20 kernel: [    0.715948] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
11-28 13:20 kernel: [    0.784346] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
11-28 13:20 kernel: [    0.784367] pnp 00:08: Plug and Play ACPI device, IDs DLL05a9 PNP0f13 (active)
11-28 13:20 kernel: [    0.784390] pnp 00:09: Plug and Play ACPI device, IDs SMO8810 (active)
11-28 13:20 kernel: [    0.784481] pnp 00:0a: disabling [mem 0xffffffff-0x100000ffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
11-28 13:20 kernel: [    0.784497] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
11-28 13:20 kernel: [    0.784500] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
11-28 13:20 kernel: [    0.784502] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
11-28 13:20 kernel: [    0.784504] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
11-28 13:20 kernel: [    0.784506] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
11-28 13:20 kernel: [    0.784508] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
11-28 13:20 kernel: [    0.784511] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
11-28 13:20 kernel: [    0.784513] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
11-28 13:20 kernel: [    0.784515] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
11-28 13:20 kernel: [    0.784517] system 00:0a: [mem 0x9fa11000-0x9fa11fff] has been reserved
11-28 13:20 kernel: [    0.784520] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
11-28 13:20 kernel: [    0.784964] pnp: PnP ACPI: found 11 devices
11-28 13:20 kernel: [    0.784966] ACPI: bus type PNP unregistered
11-28 13:20 kernel: [    0.790789] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
11-28 13:20 kernel: [    0.790805] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
11-28 13:20 kernel: [    0.790807] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
11-28 13:20 kernel: [    0.790809] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
11-28 13:20 kernel: [    0.790824] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
11-28 13:20 kernel: [    0.790825] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
11-28 13:20 kernel: [    0.790827] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
11-28 13:20 kernel: [    0.790831] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
11-28 13:20 kernel: [    0.790835] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
11-28 13:20 kernel: [    0.790838] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
11-28 13:20 kernel: [    0.790841] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
11-28 13:20 kernel: [    0.790844] pci 0000:00:01.0: PCI bridge to [bus 01-06]
11-28 13:20 kernel: [    0.790847] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
11-28 13:20 kernel: [    0.790850] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd1ffffff]
11-28 13:20 kernel: [    0.790853] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
11-28 13:20 kernel: [    0.790857] pci 0000:00:1c.0: PCI bridge to [bus 07]
11-28 13:20 kernel: [    0.790860] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
11-28 13:20 kernel: [    0.790866] pci 0000:00:1c.0:   bridge window [mem 0x9fb00000-0x9fcfffff]
11-28 13:20 kernel: [    0.790869] pci 0000:00:1c.0:   bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
11-28 13:20 kernel: [    0.790876] pci 0000:00:1c.2: PCI bridge to [bus 08]
11-28 13:20 kernel: [    0.790878] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
11-28 13:20 kernel: [    0.790884] pci 0000:00:1c.2:   bridge window [mem 0xd2500000-0xd25fffff]
11-28 13:20 kernel: [    0.790892] pci 0000:00:1c.3: PCI bridge to [bus 09]
11-28 13:20 kernel: [    0.790898] pci 0000:00:1c.3:   bridge window [mem 0xd2400000-0xd24fffff]
11-28 13:20 kernel: [    0.790907] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
11-28 13:20 kernel: [    0.790908] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
11-28 13:20 kernel: [    0.790909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
11-28 13:20 kernel: [    0.790911] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
11-28 13:20 kernel: [    0.790912] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
11-28 13:20 kernel: [    0.790913] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
11-28 13:20 kernel: [    0.790914] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
11-28 13:20 kernel: [    0.790916] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
11-28 13:20 kernel: [    0.790917] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
11-28 13:20 kernel: [    0.790918] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
11-28 13:20 kernel: [    0.790919] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
11-28 13:20 kernel: [    0.790920] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
11-28 13:20 kernel: [    0.790922] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
11-28 13:20 kernel: [    0.790923] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
11-28 13:20 kernel: [    0.790924] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
11-28 13:20 kernel: [    0.790925] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
11-28 13:20 kernel: [    0.790926] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
11-28 13:20 kernel: [    0.790928] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
11-28 13:20 kernel: [    0.790929] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
11-28 13:20 kernel: [    0.790930] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
11-28 13:20 kernel: [    0.790932] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
11-28 13:20 kernel: [    0.790933] pci_bus 0000:07: resource 1 [mem 0x9fb00000-0x9fcfffff]
11-28 13:20 kernel: [    0.790934] pci_bus 0000:07: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
11-28 13:20 kernel: [    0.790936] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
11-28 13:20 kernel: [    0.790937] pci_bus 0000:08: resource 1 [mem 0xd2500000-0xd25fffff]
11-28 13:20 kernel: [    0.790938] pci_bus 0000:09: resource 1 [mem 0xd2400000-0xd24fffff]
11-28 13:20 kernel: [    0.790961] NET: Registered protocol family 2
11-28 13:20 kernel: [    0.791122] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
11-28 13:20 kernel: [    0.791241] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
11-28 13:20 kernel: [    0.791360] TCP: Hash tables configured (established 65536 bind 65536)
11-28 13:20 kernel: [    0.791375] TCP: reno registered
11-28 13:20 kernel: [    0.791384] UDP hash table entries: 4096 (order: 5, 131072 bytes)
11-28 13:20 kernel: [    0.791409] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
11-28 13:20 kernel: [    0.791460] NET: Registered protocol family 1
11-28 13:20 kernel: [    0.791469] pci 0000:00:02.0: Video device with shadowed ROM
11-28 13:20 kernel: [    0.824436] pci 0000:08:00.0: set MSI_INTX_DISABLE_BUG flag
11-28 13:20 kernel: [    0.824482] PCI: CLS 64 bytes, default 64
11-28 13:20 kernel: [    0.824519] Trying to unpack rootfs image as initramfs...
11-28 13:20 kernel: [    1.085981] Freeing initrd memory: 18896K (ffff880035b08000 - ffff880036d7c000)
11-28 13:20 kernel: [    1.085989] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
11-28 13:20 kernel: [    1.085992] software IO TLB [mem 0x8ed80000-0x92d80000] (64MB) mapped at [ffff88008ed80000-ffff880092d7ffff]
11-28 13:20 kernel: [    1.086044] Simple Boot Flag at 0x44 set to 0x1
11-28 13:20 kernel: [    1.086233] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086242] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086248] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086256] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086261] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086267] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086275] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086284] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:20 kernel: [    1.086324] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
11-28 13:20 kernel: [    1.086327] Scanning for low memory corruption every 60 seconds
11-28 13:20 kernel: [    1.086531] Initialise system trusted keyring
11-28 13:20 kernel: [    1.086565] audit: initializing netlink socket (disabled)
11-28 13:20 kernel: [    1.086573] type=2000 audit(1417177190.080:1): initialized
11-28 13:20 kernel: [    1.109874] HugeTLB registered 2 MB page size, pre-allocated 0 pages
11-28 13:20 kernel: [    1.110671] zbud: loaded
11-28 13:20 kernel: [    1.110787] VFS: Disk quotas dquot_6.5.2
11-28 13:20 kernel: [    1.110817] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
11-28 13:20 kernel: [    1.111099] fuse init (API version 7.22)
11-28 13:20 kernel: [    1.111150] msgmni has been set to 15726
11-28 13:20 kernel: [    1.111186] Key type big_key registered
11-28 13:20 kernel: [    1.111546] Key type asymmetric registered
11-28 13:20 kernel: [    1.111548] Asymmetric key parser 'x509' registered
11-28 13:20 kernel: [    1.111567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
11-28 13:20 kernel: [    1.111607] io scheduler noop registered
11-28 13:20 kernel: [    1.111609] io scheduler deadline registered (default)
11-28 13:20 kernel: [    1.111625] io scheduler cfq registered
11-28 13:20 kernel: [    1.111670] pcieport 0000:00:01.0: device [8086:0c01] has invalid IRQ; check vendor BIOS
11-28 13:20 kernel: [    1.111768] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
11-28 13:20 kernel: [    1.111799] pcieport 0000:00:1c.0: device [8086:8c10] has invalid IRQ; check vendor BIOS
11-28 13:20 kernel: [    1.111888] pcieport 0000:00:1c.2: device [8086:8c14] has invalid IRQ; check vendor BIOS
11-28 13:20 kernel: [    1.111972] pcieport 0000:00:1c.3: device [8086:8c16] has invalid IRQ; check vendor BIOS
11-28 13:20 kernel: [    1.112067] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
11-28 13:20 kernel: [    1.112077] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
11-28 13:20 kernel: [    1.112104] efifb: probing for efifb
11-28 13:20 kernel: [    1.112880] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
11-28 13:20 kernel: [    1.112882] efifb: mode is 1920x1080x32, linelength=7680, pages=1
11-28 13:20 kernel: [    1.112883] efifb: scrolling: redraw
11-28 13:20 kernel: [    1.112885] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
11-28 13:20 kernel: [    1.116593] Console: switching to colour frame buffer device 240x67
11-28 13:20 kernel: [    1.120874] fb0: EFI VGA frame buffer device
11-28 13:20 kernel: [    1.120899] intel_idle: MWAIT substates: 0x42120
11-28 13:20 kernel: [    1.120901] intel_idle: v0.4 model 0x3C
11-28 13:20 kernel: [    1.120902] intel_idle: lapic_timer_reliable_states 0xffffffff
11-28 13:20 kernel: [    1.121034] ipmi message handler version 39.2
11-28 13:20 kernel: [    1.121080] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
11-28 13:20 kernel: [    1.121145] ACPI: AC Adapter [ACAD] (on-line)
11-28 13:20 kernel: [    1.121236] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
11-28 13:20 kernel: [    1.121274] ACPI: Power Button [PWRB]
11-28 13:20 kernel: [    1.121315] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
11-28 13:20 kernel: [    1.121361] ACPI: Lid Switch [LID0]
11-28 13:20 kernel: [    1.121394] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
11-28 13:20 kernel: [    1.121421] ACPI: Power Button [PWRF]
11-28 13:20 kernel: [    1.121730] GHES: HEST is not enabled!
11-28 13:20 kernel: [    1.121805] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
11-28 13:20 kernel: [    1.360989] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
11-28 13:20 kernel: [    1.361029] ACPI: Battery Slot [BAT1] (battery present)
11-28 13:20 kernel: [    1.361133] Linux agpgart interface v0.103
11-28 13:20 kernel: [    1.362026] brd: module loaded
11-28 13:20 kernel: [    1.362454] loop: module loaded
11-28 13:20 kernel: [    1.362701] libphy: Fixed MDIO Bus: probed
11-28 13:20 kernel: [    1.362771] tun: Universal TUN/TAP device driver, 1.6
11-28 13:20 kernel: [    1.362790] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
11-28 13:20 kernel: [    1.362863] PPP generic driver version 2.4.2
11-28 13:20 kernel: [    1.362914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
11-28 13:20 kernel: [    1.362941] ehci-pci: EHCI PCI platform driver
11-28 13:20 kernel: [    1.363050] ehci-pci 0000:00:1a.0: EHCI Host Controller
11-28 13:20 kernel: [    1.363073] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
11-28 13:20 kernel: [    1.363109] ehci-pci 0000:00:1a.0: debug port 2
11-28 13:20 kernel: [    1.367023] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
11-28 13:20 kernel: [    1.367040] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd261d000
11-28 13:20 kernel: [    1.376974] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
11-28 13:20 kernel: [    1.377031] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
11-28 13:20 kernel: [    1.377056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:20 kernel: [    1.377082] usb usb1: Product: EHCI Host Controller
11-28 13:20 kernel: [    1.377100] usb usb1: Manufacturer: Linux 3.13.0-40-generic ehci_hcd
11-28 13:20 kernel: [    1.377123] usb usb1: SerialNumber: 0000:00:1a.0
11-28 13:20 kernel: [    1.377214] hub 1-0:1.0: USB hub found
11-28 13:20 kernel: [    1.377232] hub 1-0:1.0: 2 ports detected
11-28 13:20 kernel: [    1.377403] ehci-pci 0000:00:1d.0: EHCI Host Controller
11-28 13:20 kernel: [    1.377425] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
11-28 13:20 kernel: [    1.377460] ehci-pci 0000:00:1d.0: debug port 2
11-28 13:20 kernel: [    1.381382] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
11-28 13:20 kernel: [    1.381399] ehci-pci 0000:00:1d.0: irq 19, io mem 0xd261c000
11-28 13:20 kernel: [    1.392992] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
11-28 13:20 kernel: [    1.393038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
11-28 13:20 kernel: [    1.393063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:20 kernel: [    1.394161] usb usb2: Product: EHCI Host Controller
11-28 13:20 kernel: [    1.395273] usb usb2: Manufacturer: Linux 3.13.0-40-generic ehci_hcd
11-28 13:20 kernel: [    1.396378] usb usb2: SerialNumber: 0000:00:1d.0
11-28 13:20 kernel: [    1.397595] hub 2-0:1.0: USB hub found
11-28 13:20 kernel: [    1.398686] hub 2-0:1.0: 2 ports detected
11-28 13:20 kernel: [    1.399845] ehci-platform: EHCI generic platform driver
11-28 13:20 kernel: [    1.400938] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
11-28 13:20 kernel: [    1.402044] ohci-pci: OHCI PCI platform driver
11-28 13:20 kernel: [    1.403142] ohci-platform: OHCI generic platform driver
11-28 13:20 kernel: [    1.404227] uhci_hcd: USB Universal Host Controller Interface driver
11-28 13:20 kernel: [    1.405409] xhci_hcd 0000:00:14.0: xHCI Host Controller
11-28 13:20 kernel: [    1.406353] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
11-28 13:20 kernel: [    1.407517] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
11-28 13:20 kernel: [    1.407533] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
11-28 13:20 kernel: [    1.407581] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
11-28 13:20 kernel: [    1.408518] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:20 kernel: [    1.409584] usb usb3: Product: xHCI Host Controller
11-28 13:20 kernel: [    1.410632] usb usb3: Manufacturer: Linux 3.13.0-40-generic xhci_hcd
11-28 13:20 kernel: [    1.411682] usb usb3: SerialNumber: 0000:00:14.0
11-28 13:20 kernel: [    1.412835] hub 3-0:1.0: USB hub found
11-28 13:20 kernel: [    1.413899] hub 3-0:1.0: 14 ports detected
11-28 13:20 kernel: [    1.416573] xhci_hcd 0000:00:14.0: xHCI Host Controller
11-28 13:20 kernel: [    1.417603] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
11-28 13:20 kernel: [    1.418656] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
11-28 13:20 kernel: [    1.419690] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:20 kernel: [    1.420718] usb usb4: Product: xHCI Host Controller
11-28 13:20 kernel: [    1.421745] usb usb4: Manufacturer: Linux 3.13.0-40-generic xhci_hcd
11-28 13:20 kernel: [    1.422769] usb usb4: SerialNumber: 0000:00:14.0
11-28 13:20 kernel: [    1.423906] hub 4-0:1.0: USB hub found
11-28 13:20 kernel: [    1.424924] hub 4-0:1.0: 6 ports detected
11-28 13:20 kernel: [    1.429103] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
11-28 13:20 kernel: [    1.471579] serio: i8042 KBD port at 0x60,0x64 irq 1
11-28 13:20 kernel: [    1.472444] serio: i8042 AUX port at 0x60,0x64 irq 12
11-28 13:20 kernel: [    1.473540] mousedev: PS/2 mouse device common for all mice
11-28 13:20 kernel: [    1.474913] rtc_cmos 00:05: RTC can wake from S4
11-28 13:20 kernel: [    1.475989] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
11-28 13:20 kernel: [    1.476958] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
11-28 13:20 kernel: [    1.477971] device-mapper: uevent: version 1.0.3
11-28 13:20 kernel: [    1.479003] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
11-28 13:20 kernel: [    1.479960] ledtrig-cpu: registered to indicate activity on CPUs
11-28 13:20 kernel: [    1.480897] EFI Variables Facility v0.08 2004-May-17
11-28 13:20 kernel: [    1.524444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
11-28 13:20 kernel: [    1.573200] TCP: cubic registered
11-28 13:20 kernel: [    1.574230] NET: Registered protocol family 10
11-28 13:20 kernel: [    1.575317] NET: Registered protocol family 17
11-28 13:20 kernel: [    1.576171] Key type dns_resolver registered
11-28 13:20 kernel: [    1.577632] Loading compiled-in X.509 certificates
11-28 13:20 kernel: [    1.579192] Loaded X.509 cert 'Magrathea: Glacier signing key: 35728cdb88aa70fdd3acd153a37b513192a47fd8'
11-28 13:20 kernel: [    1.580180] registered taskstats version 1
11-28 13:20 kernel: [    1.583374] Key type trusted registered
11-28 13:20 kernel: [    1.586227] Key type encrypted registered
11-28 13:20 kernel: [    1.589066] AppArmor: AppArmor sha1 policy hashing enabled
11-28 13:20 kernel: [    1.590046] IMA: No TPM chip found, activating TPM-bypass!
11-28 13:20 kernel: [    1.592024] regulator-dummy: disabling
11-28 13:20 kernel: [    1.593092]   Magic number: 6:678:330
11-28 13:20 kernel: [    1.594099] tty tty51: hash matches
11-28 13:20 kernel: [    1.595145] rtc_cmos 00:05: setting system clock to 2014-11-28 12:19:51 UTC (1417177191)
11-28 13:20 kernel: [    1.597252] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
11-28 13:20 kernel: [    1.598019] EDD information not available.
11-28 13:20 kernel: [    1.598752] PM: Hibernation image not present or could not be loaded.
11-28 13:20 kernel: [    1.599304] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
11-28 13:20 kernel: [    1.600019] Write protecting the kernel read-only data: 12288k
11-28 13:20 kernel: [    1.602100] Freeing unused kernel memory: 804K (ffff880002737000 - ffff880002800000)
11-28 13:20 kernel: [    1.603854] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
11-28 13:20 kernel: [    1.613971] systemd-udevd[145]: starting version 204
11-28 13:20 kernel: [    1.627433] rtsx_pci 0000:09:00.0: irq 42 for MSI/MSI-X
11-28 13:20 kernel: [    1.627444] rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
11-28 13:20 kernel: [    1.628303] sdhci: Secure Digital Host Controller Interface driver
11-28 13:20 kernel: [    1.629851] sdhci: Copyright(c) Pierre Ossman
11-28 13:20 kernel: [    1.631363] ahci 0000:00:1f.2: version 3.0
11-28 13:20 kernel: [    1.631464] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
11-28 13:20 kernel: [    1.631484] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
11-28 13:20 kernel: [    1.632326] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
11-28 13:20 kernel: [    1.633149] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
11-28 13:20 kernel: [    1.634018] sdhci-pci 0000:09:00.1: SDHCI controller found [10ec:5209] (rev 1)
11-28 13:20 kernel: [    1.635531] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
11-28 13:20 kernel: [    1.636941] sdhci-pci 0000:09:00.1: dummy supplies not allowed
11-28 13:20 kernel: [    1.638389] mmc0: no vqmmc regulator found
11-28 13:20 kernel: [    1.639803] sdhci-pci 0000:09:00.1: dummy supplies not allowed
11-28 13:20 kernel: [    1.641211] mmc0: no vmmc regulator found
11-28 13:20 kernel: [    1.642637] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
11-28 13:20 kernel: [    1.643631] mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA
11-28 13:20 kernel: [    1.654233] scsi0 : ahci
11-28 13:20 kernel: [    1.655335] scsi1 : ahci
11-28 13:20 kernel: [    1.656315] scsi2 : ahci
11-28 13:20 kernel: [    1.656446] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [34:e6:d7:04:70:73]
11-28 13:20 kernel: [    1.658086] scsi3 : ahci
11-28 13:20 kernel: [    1.659024] scsi4 : ahci
11-28 13:20 kernel: [    1.659914] scsi5 : ahci
11-28 13:20 kernel: [    1.660786] ata1: SATA max UDMA/133 abar m2048@0xd261b000 port 0xd261b100 irq 43
11-28 13:20 kernel: [    1.661603] ata2: DUMMY
11-28 13:20 kernel: [    1.662379] ata3: DUMMY
11-28 13:20 kernel: [    1.663146] ata4: DUMMY
11-28 13:20 kernel: [    1.663898] ata5: SATA max UDMA/133 abar m2048@0xd261b000 port 0xd261b300 irq 43
11-28 13:20 kernel: [    1.664665] ata6: SATA max UDMA/133 abar m2048@0xd261b000 port 0xd261b380 irq 43
11-28 13:20 kernel: [    1.681386] systemd-udevd[147]: renamed network interface eth0 to p2p1
11-28 13:20 kernel: [    1.689364] usb 1-1: new high-speed USB device number 2 using ehci-pci
11-28 13:20 kernel: [    1.821907] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
11-28 13:20 kernel: [    1.822966] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
11-28 13:20 kernel: [    1.824158] hub 1-1:1.0: USB hub found
11-28 13:20 kernel: [    1.825015] hub 1-1:1.0: 6 ports detected
11-28 13:20 kernel: [    1.937605] usb 2-1: new high-speed USB device number 2 using ehci-pci
11-28 13:20 kernel: [    1.985681] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
11-28 13:20 kernel: [    1.989987] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
11-28 13:20 kernel: [    1.991253] ata1.00: ATA-9: WDC WD10JFCX-68N6GN0, 82.00A82, max UDMA/133
11-28 13:20 kernel: [    1.992244] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
11-28 13:20 kernel: [    1.993824] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
11-28 13:20 kernel: [    1.994984] ata1.00: configured for UDMA/133
11-28 13:20 kernel: [    1.996137] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JFCX-68N 82.0 PQ: 0 ANSI: 5
11-28 13:20 kernel: [    1.997352] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
11-28 13:20 kernel: [    1.997361] sd 0:0:0:0: Attached scsi generic sg0 type 0
11-28 13:20 kernel: [    1.999197] sd 0:0:0:0: [sda] 4096-byte physical blocks
11-28 13:20 kernel: [    2.000253] sd 0:0:0:0: [sda] Write Protect is off
11-28 13:20 kernel: [    2.001241] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
11-28 13:20 kernel: [    2.001309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
11-28 13:20 kernel: [    2.005356]  sda: sda1 sda2
11-28 13:20 kernel: [    2.006756] sd 0:0:0:0: [sda] Attached SCSI disk
11-28 13:20 kernel: [    2.070175] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
11-28 13:20 kernel: [    2.071294] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
11-28 13:20 kernel: [    2.072417] hub 2-1:1.0: USB hub found
11-28 13:20 kernel: [    2.073409] hub 2-1:1.0: 8 ports detected
11-28 13:20 kernel: [    2.085779] tsc: Refined TSC clocksource calibration: 2494.224 MHz
11-28 13:20 kernel: [    2.241968] usb 3-3: new full-speed USB device number 2 using xhci_hcd
11-28 13:20 kernel: [    2.260760] usb 3-3: New USB device found, idVendor=046d, idProduct=c52b
11-28 13:20 kernel: [    2.261845] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
11-28 13:20 kernel: [    2.262790] usb 3-3: Product: USB Receiver
11-28 13:20 kernel: [    2.263575] usb 3-3: Manufacturer: Logitech
11-28 13:20 kernel: [    2.267524] hidraw: raw HID events driver (C) Jiri Kosina
11-28 13:20 kernel: [    2.272678] usbcore: registered new interface driver usbhid
11-28 13:20 kernel: [    2.273748] usbhid: USB HID core driver
11-28 13:20 kernel: [    2.276463] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
11-28 13:20 kernel: [    2.314055] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
11-28 13:20 kernel: [    2.316436] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GS40N, A100, max UDMA/100
11-28 13:20 kernel: [    2.319049] ata5.00: configured for UDMA/100
11-28 13:20 kernel: [    2.321647] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GS40N    A100 PQ: 0 ANSI: 5
11-28 13:20 kernel: [    2.325819] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
11-28 13:20 kernel: [    2.326939] cdrom: Uniform CD-ROM driver Revision: 3.20
11-28 13:20 kernel: [    2.328034] sr 4:0:0:0: Attached scsi CD-ROM sr0
11-28 13:20 kernel: [    2.328088] sr 4:0:0:0: Attached scsi generic sg1 type 5
11-28 13:20 kernel: [    2.334218] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
11-28 13:20 kernel: [    2.494271] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64dd
11-28 13:20 kernel: [    2.495401] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
11-28 13:20 kernel: [    2.496237] usb 1-1.4: Product: Laptop_Integrated_Webcam_FHD
11-28 13:20 kernel: [    2.497028] usb 1-1.4: Manufacturer: CN0W58PR7248749H05VRA00
11-28 13:20 kernel: [    2.574480] usb 2-1.7: new full-speed USB device number 3 using ehci-pci
11-28 13:20 kernel: [    2.646403] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
11-28 13:20 kernel: [    2.659733] ata6.00: ATA-9: INTEL SSDMCEAC120B3, LLLi, max UDMA/133
11-28 13:20 kernel: [    2.660850] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
11-28 13:20 kernel: [    2.667329] usb 2-1.7: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
11-28 13:20 kernel: [    2.669458] usb 2-1.7: New USB device found, idVendor=187c, idProduct=0525
11-28 13:20 kernel: [    2.669670] ata6.00: configured for UDMA/133
11-28 13:20 kernel: [    2.669770] scsi 5:0:0:0: Direct-Access     ATA      INTEL SSDMCEAC12 LLLi PQ: 0 ANSI: 5
11-28 13:20 kernel: [    2.669896] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
11-28 13:20 kernel: [    2.669931] sd 5:0:0:0: [sdb] Write Protect is off
11-28 13:20 kernel: [    2.669933] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
11-28 13:20 kernel: [    2.669941] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
11-28 13:20 kernel: [    2.669942] sd 5:0:0:0: Attached scsi generic sg2 type 0
11-28 13:20 kernel: [    2.670224]  sdb: sdb1 sdb2 sdb3
11-28 13:20 kernel: [    2.670531] sd 5:0:0:0: [sdb] Attached SCSI disk
11-28 13:20 kernel: [    2.677295] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
11-28 13:20 kernel: [    2.678166] usb 2-1.7: Product: M14x
11-28 13:20 kernel: [    2.679180] usb 2-1.7: Manufacturer: Alienware
11-28 13:20 kernel: [    2.680276] usb 2-1.7: SerialNumber: 2.3.0
11-28 13:20 kernel: [    2.684135] hid-generic 0003:187C:0525.0004: hiddev0,hidraw1: USB HID v1.01 Device [Alienware M14x] on usb-0000:00:1d.0-1.7/input0
11-28 13:20 kernel: [    2.709436] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
11-28 13:20 kernel: [    2.754080] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2417, fw id: 1365292
11-28 13:20 kernel: [    2.820797] random: init urandom read with 74 bits of entropy available
11-28 13:20 kernel: [    2.844682] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
11-28 13:20 kernel: [    2.907916] systemd-udevd[277]: starting version 204
11-28 13:20 kernel: [    2.933878] wmi: Mapper loaded
11-28 13:20 kernel: [    2.938196] input: Dell WMI hotkeys as /devices/virtual/input/input6
11-28 13:20 kernel: [    3.029486] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.030697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
11-28 13:20 kernel: [    3.032408] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.033838] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.036407] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.037851] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
11-28 13:20 kernel: [    3.039442] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.041014] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.042508] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.044482] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 4 (20131115/utaddress-251)
11-28 13:20 kernel: [    3.045833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
11-28 13:20 kernel: [    3.047668] lpc_ich: Resource conflict(s) found affecting gpio_ich
11-28 13:20 kernel: [    3.049904] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
11-28 13:20 kernel: [    3.052225] [drm] Initialized drm 1.1.0 20060810
11-28 13:20 kernel: [    3.064127] ip_tables: (C) 2000-2006 Netfilter Core Team
11-28 13:20 kernel: [    3.072819] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
11-28 13:20 kernel: [    3.087714] ip6_tables: (C) 2000-2006 Netfilter Core Team
11-28 13:20 kernel: [    3.090583] Switched to clocksource tsc
11-28 13:20 kernel: [    3.111422] HDA driver get symbol successfully from i915 module
11-28 13:20 kernel: [    3.112641] ------------[ cut here ]------------
11-28 13:20 kernel: [    3.113992] WARNING: CPU: 0 PID: 4 at /build/buildd/linux-3.13.0/drivers/gpu/drm/i915/intel_pm.c:5856 i915_request_power_well+0x77/0x80 [i915]()
11-28 13:20 kernel: [    3.116041] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
11-28 13:20 kernel: [    3.115897] Modules linked in: xt_addrtype(+) snd_hda_intel(+) nf_conntrack_ipv4 snd_hda_codec nf_defrag_ipv4 xt_conntrack snd_hwdep snd_pcm ip6table_filter x86_pkg_temp_thermal intel_powerclamp snd_page_alloc coretemp kvm_intel ip6_tables snd_seq_midi snd_seq_midi_event snd_rawmidi nf_conntrack_netbios_ns nf_conntrack_broadcast kvm nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack crct10dif_pclmul i915 crc32_pclmul snd_seq ghash_clmulni_intel aesni_intel iptable_filter ip_tables snd_seq_device aes_x86_64 lrw x_tables gf128mul snd_timer glue_helper drm_kms_helper ablk_helper cryptd drm snd rtsx_pci_ms i2c_algo_bit mei_me memstick mei soundcore lpc_ich serio_raw dell_wmi sparse_keymap video wmi mac_hid hid_generic hid_logitech_dj usbhid hid rtsx_pci_sdmmc sdhci_pci psmouse ahci alx sdhci libahci rtsx_pci mdio
11-28 13:20 kernel: [    3.120672] CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G          I   3.13.0-40-generic #69-Ubuntu
11-28 13:20 kernel: [    3.121872] Hardware name: Alienware Alienware 14/07MJ2Y, BIOS A09 04/23/2014
11-28 13:20 kernel: [    3.123056] Workqueue: events azx_probe_work [snd_hda_intel]
11-28 13:20 kernel: [    3.124254]  0000000000000009 ffff880253a5bd50 ffffffff8171f226 0000000000000000
11-28 13:20 kernel: [    3.125449]  ffff880253a5bd88 ffffffff810677cd 0000000000000000 0000000000000000
11-28 13:20 kernel: [    3.126544]  0000000000000000 ffff8802534b3000 ffff88024f785000 ffff880253a5bd98
11-28 13:20 kernel: [    3.127900] Call Trace:
11-28 13:20 kernel: [    3.129491]  [<ffffffff8171f226>] dump_stack+0x45/0x56
11-28 13:20 kernel: [    3.131597]  [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
11-28 13:20 kernel: [    3.133668]  [<ffffffff810678aa>] warn_slowpath_null+0x1a/0x20
11-28 13:20 kernel: [    3.135745]  [<ffffffffa02534c7>] i915_request_power_well+0x77/0x80 [i915]
11-28 13:20 kernel: [    3.137810] SKU: Nid=0x1d sku_cfg=0x41000001
11-28 13:20 kernel: [    3.137816]  [<ffffffffa03eaf42>] hda_display_power+0x32/0x40 [snd_hda_intel]
11-28 13:20 kernel: [    3.137820]  [<ffffffffa03e98a5>] azx_probe_continue+0x55/0x980 [snd_hda_intel]
11-28 13:20 kernel: [    3.137823]  [<ffffffffa03eacd5>] azx_probe_work+0x15/0x20 [snd_hda_intel]
11-28 13:20 kernel: [    3.137826]  [<ffffffff81083a52>] process_one_work+0x182/0x450
11-28 13:20 kernel: [    3.137828]  [<ffffffff81084841>] worker_thread+0x121/0x410
11-28 13:20 kernel: [    3.137830]  [<ffffffff81084720>] ? rescuer_thread+0x430/0x430
11-28 13:20 kernel: [    3.137832]  [<ffffffff8108b562>] kthread+0xd2/0xf0
11-28 13:20 kernel: [    3.137834]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
11-28 13:20 kernel: [    3.137835]  [<ffffffff8172fc7c>] ret_from_fork+0x7c/0xb0
11-28 13:20 kernel: [    3.137837]  [<ffffffff8108b490>] ? kthread_create_on_node+0x1c0/0x1c0
11-28 13:20 kernel: [    3.137838] ---[ end trace 2c6648877d2f3fba ]---
11-28 13:20 kernel: [    3.137942] snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
11-28 13:20 kernel: [    3.151381] SKU: port_connectivity=0x1
11-28 13:20 kernel: [    3.152479] SKU: enable_pcbeep=0x0
11-28 13:20 kernel: [    3.153571] SKU: check_sum=0x00000000
11-28 13:20 kernel: [    3.154666] SKU: customization=0x00000000
11-28 13:20 kernel: [    3.155750] SKU: external_amp=0x0
11-28 13:20 kernel: [    3.156824] SKU: platform_type=0x0
11-28 13:20 kernel: [    3.157875] SKU: swap=0x0
11-28 13:20 kernel: [    3.159225] SKU: override=0x1
11-28 13:20 kernel: [    3.160486] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
11-28 13:20 kernel: [    3.161223] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
11-28 13:20 kernel: [    3.161263] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
11-28 13:20 kernel: [    3.163565]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
11-28 13:20 kernel: [    3.164572]    hp_outs=2 (0x15/0x16/0x0/0x0/0x0)
11-28 13:20 kernel: [    3.165542]    mono: mono_out=0x0
11-28 13:20 kernel: [    3.166524]    inputs:
11-28 13:20 kernel: [    3.167480]      Mic=0x19
11-28 13:20 kernel: [    3.168427]      Internal Mic=0x12
11-28 13:20 kernel: [    3.169344] realtek: No valid SSID, checking pincfg 0x41000001 for NID 0x1d
11-28 13:20 kernel: [    3.170301] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0668
11-28 13:20 kernel: [    3.176803] input: HDA Intel PCH Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
11-28 13:20 kernel: [    3.177812] input: HDA Intel PCH Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
11-28 13:20 kernel: [    3.178763] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
11-28 13:20 kernel: [    3.210643] alx 0000:08:00.0: irq 47 for MSI/MSI-X
11-28 13:20 kernel: [    3.210744] IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
11-28 13:20 kernel: [    3.227546] random: nonblocking pool is initialized
11-28 13:20 kernel: [    4.527956] alx 0000:08:00.0 p2p1: NIC Up: 1 Gbps Full
11-28 13:20 kernel: [    4.528535] IPv6: ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
11-28 13:20 kernel: [    8.575080] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=113.142.8.12 DST=46.126.174.34 LEN=84 TOS=0x00 PREC=0x00 TTL=50 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=23361 SEQ=0 
11-28 13:20 kernel: [   10.370914] init: plymouth-upstart-bridge main process (832) terminated with status 1
11-28 13:20 kernel: [   10.370922] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:20 kernel: [   10.379041] init: plymouth-upstart-bridge main process (849) terminated with status 1
11-28 13:20 kernel: [   10.379051] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:20 kernel: [   10.379323] init: ureadahead main process (835) terminated with status 5
11-28 13:20 kernel: [   10.383558] init: plymouth-upstart-bridge main process (881) terminated with status 1
11-28 13:20 kernel: [   10.383565] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:20 kernel: [   10.618372] EXT4-fs (sdb1): re-mounted. Opts: discard,commit=60,errors=remount-ro
11-28 13:20 kernel: [   10.672157] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard,commit=60
11-28 13:20 kernel: [   10.821461] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
11-28 13:20 kernel: [   10.845416] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
11-28 13:20 kernel: [   10.949627] init: failsafe main process (1121) killed by TERM signal
11-28 13:20 kernel: [   11.043187] type=1400 audit(1417177200.930:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1293 comm="apparmor_parser"
11-28 13:20 kernel: [   11.043572] type=1400 audit(1417177200.934:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1291 comm="apparmor_parser"
11-28 13:20 kernel: [   11.043577] type=1400 audit(1417177200.934:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1291 comm="apparmor_parser"
11-28 13:20 kernel: [   11.043580] type=1400 audit(1417177200.934:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1291 comm="apparmor_parser"
11-28 13:20 kernel: [   11.043892] type=1400 audit(1417177200.934:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1291 comm="apparmor_parser"
11-28 13:20 kernel: [   11.043896] type=1400 audit(1417177200.934:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1291 comm="apparmor_parser"
11-28 13:20 kernel: [   11.044051] type=1400 audit(1417177200.934:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1291 comm="apparmor_parser"
11-28 13:20 rsyslogd-2039: Could no open output pipe '/dev/xconsole': No such file or directory [try http://www.rsyslog.com/e/2039 ]
11-28 13:20 cron: <78>Nov 28 13:20:00 cron[1364]: (CRON) INFO (pidfile fd = 3)
11-28 13:20 cron: <78>Nov 28 13:20:01 cron[1390]: (CRON) STARTUP (fork ok)
11-28 13:20 cron: <78>Nov 28 13:20:01 cron[1390]: (CRON) INFO (Running @reboot jobs)
11-28 13:20 acpid: <30>Nov 28 13:20:01 acpid: starting up with netlink and the input layer
11-28 13:20 acpid: <30>Nov 28 13:20:01 acpid: 1 rule loaded
11-28 13:20 acpid: <30>Nov 28 13:20:01 acpid: waiting for events: event logging is off
11-28 13:20 kernel: [   11.410941] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:20 kernel: [   15.294991] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=200.21.225.242 DST=46.126.174.34 LEN=72 TOS=0x00 PREC=0x00 TTL=50 ID=39620 PROTO=UDP SPT=53 DPT=2336 LEN=52 
11-28 13:20 ntpdate: <29>Nov 28 13:20:06 ntpdate[1238]: step time server 91.189.94.4 offset -0.690994 sec
11-28 13:21 kernel: [  111.104161] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input12
11-28 13:21 kernel: [  111.104534] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-3:1
11-28 13:24 kernel: [  287.923513] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=74.82.47.57 DST=46.126.174.34 LEN=29 TOS=0x00 PREC=0x00 TTL=53 ID=24306 DF PROTO=UDP SPT=35040 DPT=17 LEN=9 
11-28 13:27 upstart-socket-bridge: <26>Nov 28 13:27:54 upstart-socket-bridge[479]: Disconnected from Upstart
11-28 13:27 upstart-udev-bridge: <26>Nov 28 13:27:54 upstart-udev-bridge[274]: Disconnected from Upstart
11-28 13:27 kernel: [  486.118742] init: upstart-udev-bridge main process (274) terminated with status 1
11-28 13:27 kernel: [  486.118748] init: upstart-udev-bridge main process ended, respawning
11-28 13:27 kernel: [  486.118819] init: upstart-socket-bridge main process (479) terminated with status 1
11-28 13:27 kernel: [  486.118823] init: upstart-socket-bridge main process ended, respawning
11-28 13:27 kernel: [  486.118880] init: upstart-file-bridge main process (1280) terminated with status 1
11-28 13:27 kernel: [  486.118884] init: upstart-file-bridge main process ended, respawning
11-28 13:28 kernel: [  507.111387] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=121.57.135.34 DST=46.126.174.34 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=30317 DF PROTO=TCP SPT=57274 DPT=23 WINDOW=5808 RES=0x00 SYN URGP=0 
11-28 13:28 kernel: [  510.114247] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=121.57.135.34 DST=46.126.174.34 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=30318 DF PROTO=TCP SPT=57274 DPT=23 WINDOW=5808 RES=0x00 SYN URGP=0 
11-28 13:28 kernel: [  516.121197] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=121.57.135.34 DST=46.126.174.34 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=30319 DF PROTO=TCP SPT=57274 DPT=23 WINDOW=5808 RES=0x00 SYN URGP=0 
11-28 13:28 dbus: <29>Nov 28 13:28:30 dbus[1142]: [system] Reloaded configuration
11-28 13:28 upstart-socket-bridge: <26>Nov 28 13:28:33 upstart-socket-bridge[8343]: Disconnected from Upstart
11-28 13:28 upstart-udev-bridge: <26>Nov 28 13:28:33 upstart-udev-bridge[8337]: Disconnected from Upstart
11-28 13:28 kernel: [  524.396104] init: upstart-udev-bridge main process (8337) terminated with status 1
11-28 13:28 kernel: [  524.396113] init: upstart-udev-bridge main process ended, respawning
11-28 13:28 kernel: [  524.396189] init: upstart-file-bridge main process (8340) terminated with status 1
11-28 13:28 kernel: [  524.396194] init: upstart-file-bridge main process ended, respawning
11-28 13:28 kernel: [  524.396244] init: upstart-socket-bridge main process (8343) terminated with status 1
11-28 13:28 kernel: [  524.396249] init: upstart-socket-bridge main process ended, respawning
11-28 13:29 rsyslogd:  [origin software="rsyslogd" swVersion="7.4.4" x-pid="1251" x-info="http://www.rsyslog.com"] exiting on signal 15.
11-28 13:30 rsyslogd:  [origin software="rsyslogd" swVersion="7.4.4" x-pid="815" x-info="http://www.rsyslog.com"] start
11-28 13:30 rsyslogd: rsyslogd's groupid changed to 104
11-28 13:30 rsyslogd: rsyslogd's userid changed to 101
11-28 13:30 kernel: [    0.000000] CPU0 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:30 kernel: [    0.000000] Initializing cgroup subsys cpuset
11-28 13:30 kernel: [    0.000000] Initializing cgroup subsys cpu
11-28 13:30 kernel: [    0.000000] Initializing cgroup subsys cpuacct
11-28 13:30 kernel: [    0.000000] Linux version 3.13.0-40-generic (buildd@comet) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #69-Ubuntu SMP Thu Nov 13 17:53:56 UTC 2014 (Ubuntu 3.13.0-40.69-generic 3.13.11.10)
11-28 13:30 kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=b34a3bf5-e23c-481a-af72-adb5f2ac8a2c ro
11-28 13:30 kernel: [    0.000000] KERNEL supported cpus:
11-28 13:30 kernel: [    0.000000]   Intel GenuineIntel
11-28 13:30 kernel: [    0.000000]   AMD AuthenticAMD
11-28 13:30 kernel: [    0.000000]   Centaur CentaurHauls
11-28 13:30 kernel: [    0.000000] e820: BIOS-provided physical RAM map:
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d6ffff] usable
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x0000000094d70000-0x0000000095d6ffff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x0000000095d70000-0x000000009a37efff] usable
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x000000009a37f000-0x000000009a57efff] type 20
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x000000009a57f000-0x000000009ae7efff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x000000009ae7f000-0x000000009af7efff] ACPI NVS
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x000000009af7f000-0x000000009affefff] ACPI data
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
11-28 13:30 kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
11-28 13:30 kernel: [    0.000000] NX (Execute Disable) protection: active
11-28 13:30 kernel: [    0.000000] efi: EFI v2.31 by INSYDE Corp.
11-28 13:30 kernel: [    0.000000] efi:  ACPI=0x9affe000  ACPI 2.0=0x9affe014  SMBIOS=0x9ae7ef98 
11-28 13:30 kernel: [    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001503000) (20MB)
11-28 13:30 kernel: [    0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001503000-0x0000000002000000) (10MB)
11-28 13:30 kernel: [    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003403000) (20MB)
11-28 13:30 kernel: [    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000003403000-0x0000000035b08000) (807MB)
11-28 13:30 kernel: [    0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000035b08000-0x0000000036d7c000) (18MB)
11-28 13:30 kernel: [    0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000036d7c000-0x000000006dbe2000) (878MB)
11-28 13:30 kernel: [    0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000006dbe2000-0x0000000092d80000) (593MB)
11-28 13:30 kernel: [    0.000000] efi: mem12: type=4, attr=0xf, range=[0x0000000092d80000-0x0000000092da0000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000092da0000-0x0000000093d15000) (15MB)
11-28 13:30 kernel: [    0.000000] efi: mem14: type=2, attr=0xf, range=[0x0000000093d15000-0x0000000093ee9000) (1MB)
11-28 13:30 kernel: [    0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000093ee9000-0x0000000094d70000) (14MB)
11-28 13:30 kernel: [    0.000000] efi: mem16: type=0, attr=0xf, range=[0x0000000094d70000-0x0000000095d70000) (16MB)
11-28 13:30 kernel: [    0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000095d70000-0x0000000095d7d000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem18: type=2, attr=0xf, range=[0x0000000095d7d000-0x0000000095d7f000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000095d7f000-0x0000000095e4b000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem20: type=1, attr=0xf, range=[0x0000000095e4b000-0x0000000095f7f000) (1MB)
11-28 13:30 kernel: [    0.000000] efi: mem21: type=7, attr=0xf, range=[0x0000000095f7f000-0x0000000096903000) (9MB)
11-28 13:30 kernel: [    0.000000] efi: mem22: type=4, attr=0xf, range=[0x0000000096903000-0x000000009690b000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000009690b000-0x0000000096925000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem24: type=2, attr=0xf, range=[0x0000000096925000-0x000000009692f000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000009692f000-0x0000000096a15000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000096a15000-0x0000000096a16000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000096a16000-0x0000000096a9e000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem28: type=3, attr=0xf, range=[0x0000000096a9e000-0x0000000096aa0000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000096aa0000-0x0000000097c45000) (17MB)
11-28 13:30 kernel: [    0.000000] efi: mem30: type=7, attr=0xf, range=[0x0000000097c45000-0x0000000097c46000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000097c46000-0x0000000097c4a000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000097c4a000-0x0000000097c4d000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000097c4d000-0x0000000097c56000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000097c56000-0x0000000097c57000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000097c57000-0x0000000097de1000) (1MB)
11-28 13:30 kernel: [    0.000000] efi: mem36: type=3, attr=0xf, range=[0x0000000097de1000-0x0000000097dee000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000097dee000-0x0000000097dfb000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem38: type=7, attr=0xf, range=[0x0000000097dfb000-0x0000000097dfe000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000097dfe000-0x0000000097e05000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000097e05000-0x0000000097e14000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000097e14000-0x0000000097e31000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem42: type=3, attr=0xf, range=[0x0000000097e31000-0x0000000097e37000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000097e37000-0x0000000097e3c000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem44: type=3, attr=0xf, range=[0x0000000097e3c000-0x0000000097e3e000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000097e3e000-0x0000000097e53000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000097e53000-0x0000000097ece000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000097ece000-0x0000000097eee000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem48: type=7, attr=0xf, range=[0x0000000097eee000-0x0000000097eef000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000097eef000-0x0000000099f7f000) (32MB)
11-28 13:30 kernel: [    0.000000] efi: mem50: type=3, attr=0xf, range=[0x0000000099f7f000-0x000000009a37f000) (4MB)
11-28 13:30 kernel: [    0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x000000009a37f000-0x000000009a57f000) (2MB)
11-28 13:30 kernel: [    0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x000000009a57f000-0x000000009a77f000) (2MB)
11-28 13:30 kernel: [    0.000000] efi: mem53: type=0, attr=0xf, range=[0x000000009a77f000-0x000000009ae7f000) (7MB)
11-28 13:30 kernel: [    0.000000] efi: mem54: type=10, attr=0xf, range=[0x000000009ae7f000-0x000000009af7f000) (1MB)
11-28 13:30 kernel: [    0.000000] efi: mem55: type=9, attr=0xf, range=[0x000000009af7f000-0x000000009afff000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem57: type=7, attr=0xf, range=[0x0000000100000000-0x000000025f600000) (5622MB)
11-28 13:30 kernel: [    0.000000] efi: mem58: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem59: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
11-28 13:30 kernel: [    0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
11-28 13:30 kernel: [    0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem64: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
11-28 13:30 kernel: [    0.000000] efi: mem66: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
11-28 13:30 kernel: [    0.000000] SMBIOS 2.7 present.
11-28 13:30 kernel: [    0.000000] DMI: Alienware Alienware 14/07MJ2Y, BIOS A09 04/23/2014
11-28 13:30 kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
11-28 13:30 kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
11-28 13:30 kernel: [    0.000000] No AGP bridge found
11-28 13:30 kernel: [    0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
11-28 13:30 kernel: [    0.000000] MTRR default type: uncachable
11-28 13:30 kernel: [    0.000000] MTRR fixed ranges enabled:
11-28 13:30 kernel: [    0.000000]   00000-9FFFF write-back
11-28 13:30 kernel: [    0.000000]   A0000-BFFFF uncachable
11-28 13:30 kernel: [    0.000000]   C0000-E7FFF write-protect
11-28 13:30 kernel: [    0.000000]   E8000-EFFFF write-combining
11-28 13:30 kernel: [    0.000000]   F0000-FFFFF write-protect
11-28 13:30 kernel: [    0.000000] MTRR variable ranges enabled:
11-28 13:30 kernel: [    0.000000]   0 base 0000000000 mask 7F80000000 write-back
11-28 13:30 kernel: [    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
11-28 13:30 kernel: [    0.000000]   2 base 009B000000 mask 7FFF000000 uncachable
11-28 13:30 kernel: [    0.000000]   3 base 009C000000 mask 7FFC000000 uncachable
11-28 13:30 kernel: [    0.000000]   4 base 00FFC00000 mask 7FFFC00000 write-protect
11-28 13:30 kernel: [    0.000000]   5 base 0100000000 mask 7F00000000 write-back
11-28 13:30 kernel: [    0.000000]   6 base 0200000000 mask 7F80000000 write-back
11-28 13:30 kernel: [    0.000000]   7 base 025F600000 mask 7FFFE00000 uncachable
11-28 13:30 kernel: [    0.000000]   8 base 025F800000 mask 7FFF800000 uncachable
11-28 13:30 kernel: [    0.000000]   9 base 0260000000 mask 7FE0000000 uncachable
11-28 13:30 kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
11-28 13:30 kernel: [    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
11-28 13:30 kernel: [    0.000000] Scanning 1 areas for low memory corruption
11-28 13:30 kernel: [    0.000000] Base memory trampoline at [ffff88000007e000] 7e000 size 24576
11-28 13:30 kernel: [    0.000000] Using GB pages for direct mapping
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
11-28 13:30 kernel: [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
11-28 13:30 kernel: [    0.000000] BRK [0x02fe1000, 0x02fe1fff] PGTABLE
11-28 13:30 kernel: [    0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE
11-28 13:30 kernel: [    0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
11-28 13:30 kernel: [    0.000000]  [mem 0x25f400000-0x25f5fffff] page 2M
11-28 13:30 kernel: [    0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
11-28 13:30 kernel: [    0.000000]  [mem 0x25c000000-0x25f3fffff] page 2M
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
11-28 13:30 kernel: [    0.000000]  [mem 0x200000000-0x23fffffff] page 1G
11-28 13:30 kernel: [    0.000000]  [mem 0x240000000-0x25bffffff] page 2M
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x00100000-0x94d6ffff]
11-28 13:30 kernel: [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
11-28 13:30 kernel: [    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
11-28 13:30 kernel: [    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
11-28 13:30 kernel: [    0.000000]  [mem 0x80000000-0x94bfffff] page 2M
11-28 13:30 kernel: [    0.000000]  [mem 0x94c00000-0x94d6ffff] page 4k
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x95d70000-0x9a37efff]
11-28 13:30 kernel: [    0.000000]  [mem 0x95d70000-0x95dfffff] page 4k
11-28 13:30 kernel: [    0.000000]  [mem 0x95e00000-0x9a1fffff] page 2M
11-28 13:30 kernel: [    0.000000]  [mem 0x9a200000-0x9a37efff] page 4k
11-28 13:30 kernel: [    0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE
11-28 13:30 kernel: [    0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
11-28 13:30 kernel: [    0.000000]  [mem 0x9afff000-0x9affffff] page 4k
11-28 13:30 kernel: [    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
11-28 13:30 kernel: [    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
11-28 13:30 kernel: [    0.000000] RAMDISK: [mem 0x35b08000-0x36d7bfff]
11-28 13:30 kernel: [    0.000000] ACPI: RSDP 000000009affe014 000024 (v02 ALWARE)
11-28 13:30 kernel: [    0.000000] ACPI: XSDT 000000009affe210 0000CC (v01 ALWARE ALIENWRE 00000001      01000013)
11-28 13:30 kernel: [    0.000000] ACPI: FACP 000000009aff7000 00010C (v05 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: DSDT 000000009afe8000 00BD9D (v01 ALWARE ALIENWRE 00000000 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: FACS 000000009af77000 000040
11-28 13:30 kernel: [    0.000000] ACPI: SLIC 000000009affd000 000176 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: UEFI 000000009affc000 000236 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: FPDT 000000009affa000 000044 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: MSDM 000000009aff9000 000055 (v03 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: ASF! 000000009aff8000 0000A5 (v32 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: HPET 000000009aff6000 000038 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: APIC 000000009aff5000 00008C (v03 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: MCFG 000000009aff4000 00003C (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: SSDT 000000009afe7000 000818 (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
11-28 13:30 kernel: [    0.000000] ACPI: BOOT 000000009afe5000 000028 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: SSDT 000000009afe4000 00029D (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
11-28 13:30 kernel: [    0.000000] ACPI: ASPT 000000009afe3000 000034 (v07 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: DBGP 000000009afe2000 000034 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: SSDT 000000009afdb000 000539 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
11-28 13:30 kernel: [    0.000000] ACPI: SSDT 000000009afda000 000AD8 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
11-28 13:30 kernel: [    0.000000] ACPI: SSDT 000000009afd6000 003276 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
11-28 13:30 kernel: [    0.000000] ACPI: SSDT 000000009afcf000 003B89 (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
11-28 13:30 kernel: [    0.000000] ACPI: WDTT 000000009afd5000 000224 (v02 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: DMAR 000000009afd3000 000090 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: BGRT 000000009afd4000 000038 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
11-28 13:30 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
11-28 13:30 kernel: [    0.000000] No NUMA configuration found
11-28 13:30 kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
11-28 13:30 kernel: [    0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
11-28 13:30 kernel: [    0.000000]   NODE_DATA [mem 0x25f5f8000-0x25f5fcfff]
11-28 13:30 kernel: [    0.000000]  [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
11-28 13:30 kernel: [    0.000000] Zone ranges:
11-28 13:30 kernel: [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
11-28 13:30 kernel: [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
11-28 13:30 kernel: [    0.000000]   Normal   [mem 0x100000000-0x25f5fffff]
11-28 13:30 kernel: [    0.000000] Movable zone start for each node
11-28 13:30 kernel: [    0.000000] Early memory node ranges
11-28 13:30 kernel: [    0.000000]   node   0: [mem 0x00001000-0x0006efff]
11-28 13:30 kernel: [    0.000000]   node   0: [mem 0x00070000-0x00087fff]
11-28 13:30 kernel: [    0.000000]   node   0: [mem 0x00100000-0x94d6ffff]
11-28 13:30 kernel: [    0.000000]   node   0: [mem 0x95d70000-0x9a37efff]
11-28 13:30 kernel: [    0.000000]   node   0: [mem 0x9afff000-0x9affffff]
11-28 13:30 kernel: [    0.000000]   node   0: [mem 0x100000000-0x25f5fffff]
11-28 13:30 kernel: [    0.000000] On node 0 totalpages: 2066694
11-28 13:30 kernel: [    0.000000]   DMA zone: 64 pages used for memmap
11-28 13:30 kernel: [    0.000000]   DMA zone: 22 pages reserved
11-28 13:30 kernel: [    0.000000]   DMA zone: 3974 pages, LIFO batch:0
11-28 13:30 kernel: [    0.000000]   DMA32 zone: 9742 pages used for memmap
11-28 13:30 kernel: [    0.000000]   DMA32 zone: 623488 pages, LIFO batch:31
11-28 13:30 kernel: [    0.000000]   Normal zone: 22488 pages used for memmap
11-28 13:30 kernel: [    0.000000]   Normal zone: 1439232 pages, LIFO batch:31
11-28 13:30 kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1808
11-28 13:30 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
11-28 13:30 kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
11-28 13:30 kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
11-28 13:30 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
11-28 13:30 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
11-28 13:30 kernel: [    0.000000] ACPI: IRQ0 used by override.
11-28 13:30 kernel: [    0.000000] ACPI: IRQ2 used by override.
11-28 13:30 kernel: [    0.000000] ACPI: IRQ9 used by override.
11-28 13:30 kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
11-28 13:30 kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
11-28 13:30 kernel: [    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
11-28 13:30 kernel: [    0.000000] nr_irqs_gsi: 40
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x94d70000-0x95d6ffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9a37f000-0x9a57efff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9a57f000-0x9ae7efff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9ae7f000-0x9af7efff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9af7f000-0x9affefff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
11-28 13:30 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
11-28 13:30 kernel: [    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
11-28 13:30 kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
11-28 13:30 kernel: [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
11-28 13:30 kernel: [    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86400 r8192 d24192 u262144
11-28 13:30 kernel: [    0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
11-28 13:30 kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
11-28 13:30 kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2034378
11-28 13:30 kernel: [    0.000000] Policy zone: Normal
11-28 13:30 kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=b34a3bf5-e23c-481a-af72-adb5f2ac8a2c ro
11-28 13:30 kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
11-28 13:30 kernel: [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
11-28 13:30 kernel: [    0.000000] Checking aperture...
11-28 13:30 kernel: [    0.000000] No AGP bridge found
11-28 13:30 kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
11-28 13:30 kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
11-28 13:30 kernel: [    0.000000] ------------[ cut here ]------------
11-28 13:30 kernel: [    0.000000] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
11-28 13:30 kernel: [    0.000000] Your BIOS is broken; DMAR reported at address 0!
11-28 13:30 kernel: [    0.000000] BIOS vendor: Alienware; Ver: A09; Product Version: A09
11-28 13:30 kernel: [    0.000000] Modules linked in:
11-28 13:30 kernel: [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-40-generic #69-Ubuntu
11-28 13:30 kernel: [    0.000000] Hardware name: Alienware Alienware 14/07MJ2Y, BIOS A09 04/23/2014
11-28 13:30 kernel: [    0.000000]  000000000000000b ffffffff81c01de8 ffffffff8171f226 ffffffff81c01e30
11-28 13:30 kernel: [    0.000000]  ffffffff81c01e20 ffffffff810677cd ffffffff81fe000c ffffffff81fe0038
11-28 13:30 kernel: [    0.000000]  0000000000000000 ffffffff81de22c0 ffffffff81c01fb0 ffffffff81c01e80
11-28 13:30 kernel: [    0.000000] Call Trace:
11-28 13:30 kernel: [    0.000000]  [<ffffffff8171f226>] dump_stack+0x45/0x56
11-28 13:30 kernel: [    0.000000]  [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
11-28 13:30 kernel: [    0.000000]  [<ffffffff81067884>] warn_slowpath_fmt_taint+0x44/0x50
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d5135d>] ? early_ioremap+0x13/0x15
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d46f7f>] ? __acpi_map_table+0x13/0x18
11-28 13:30 kernel: [    0.000000]  [<ffffffff815f5d8e>] warn_invalid_dmar+0x7e/0x90
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d8bdfa>] check_zero_address+0x68/0xf4
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d8be9b>] detect_intel_iommu+0x15/0xae
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d41072>] pci_iommu_alloc+0x4a/0x6c
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d50cfa>] mem_init+0x17/0x9c
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d36d3a>] start_kernel+0x202/0x443
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d36941>] ? repair_env_string+0x5c/0x5c
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d36120>] ? early_idt_handlers+0x120/0x120
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d365ee>] x86_64_start_reservations+0x2a/0x2c
11-28 13:30 kernel: [    0.000000]  [<ffffffff81d36733>] x86_64_start_kernel+0x143/0x152
11-28 13:30 kernel: [    0.000000] ---[ end trace 9c15c62d9b7da727 ]---
11-28 13:30 kernel: [    0.000000] Memory: 7958460K/8266776K available (7376K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 308316K reserved)
11-28 13:30 kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
11-28 13:30 kernel: [    0.000000] Hierarchical RCU implementation.
11-28 13:30 kernel: [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
11-28 13:30 kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
11-28 13:30 kernel: [    0.000000] 	Offload RCU callbacks from all CPUs
11-28 13:30 kernel: [    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
11-28 13:30 kernel: [    0.000000] NR_IRQS:16640 nr_irqs:744 16
11-28 13:30 kernel: [    0.000000] Console: colour dummy device 80x25
11-28 13:30 kernel: [    0.000000] console [tty0] enabled
11-28 13:30 kernel: [    0.000000] allocated 33554432 bytes of page_cgroup
11-28 13:30 kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
11-28 13:30 kernel: [    0.000000] hpet clockevent registered
11-28 13:30 kernel: [    0.000000] tsc: Fast TSC calibration using PIT
11-28 13:30 kernel: [    0.004000] tsc: Detected 2494.114 MHz processor
11-28 13:30 kernel: [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.22 BogoMIPS (lpj=9976456)
11-28 13:30 kernel: [    0.000007] pid_max: default: 32768 minimum: 301
11-28 13:30 kernel: [    0.016851] Security Framework initialized
11-28 13:30 kernel: [    0.016871] AppArmor: AppArmor initialized
11-28 13:30 kernel: [    0.016873] Yama: becoming mindful.
11-28 13:30 kernel: [    0.017350] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
11-28 13:30 kernel: [    0.018749] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
11-28 13:30 kernel: [    0.019340] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
11-28 13:30 kernel: [    0.019351] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
11-28 13:30 kernel: [    0.019528] Initializing cgroup subsys memory
11-28 13:30 kernel: [    0.019534] Initializing cgroup subsys devices
11-28 13:30 kernel: [    0.019536] Initializing cgroup subsys freezer
11-28 13:30 kernel: [    0.019538] Initializing cgroup subsys blkio
11-28 13:30 kernel: [    0.019540] Initializing cgroup subsys perf_event
11-28 13:30 kernel: [    0.019543] Initializing cgroup subsys hugetlb
11-28 13:30 kernel: [    0.019563] CPU: Physical Processor ID: 0
11-28 13:30 kernel: [    0.019565] CPU: Processor Core ID: 0
11-28 13:30 kernel: [    0.019569] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
11-28 13:30 kernel: [    0.019569] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
11-28 13:30 kernel: [    0.020449] mce: CPU supports 9 MCE banks
11-28 13:30 kernel: [    0.020464] CPU0: Thermal monitoring enabled (TM1)
11-28 13:30 kernel: [    0.020477] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
11-28 13:30 kernel: [    0.020477] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
11-28 13:30 kernel: [    0.020477] tlb_flushall_shift: 6
11-28 13:30 kernel: [    0.020576] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
11-28 13:30 kernel: [    0.021447] ACPI: Core revision 20131115
11-28 13:30 kernel: [    0.029480] ACPI: All ACPI Tables successfully acquired
11-28 13:30 kernel: [    0.033450] ftrace: allocating 28542 entries in 112 pages
11-28 13:30 kernel: [    0.044604] dmar: Host address width 39
11-28 13:30 kernel: [    0.044607] dmar: DRHD base: 0x00000000000000 flags: 0x1
11-28 13:30 kernel: [    0.044609] dmar: parse DMAR table failure.
11-28 13:30 kernel: [    0.045011] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
11-28 13:30 kernel: [    0.084737] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
11-28 13:30 kernel: [    0.084745] TSC deadline timer enabled
11-28 13:30 kernel: [    0.084753] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
11-28 13:30 kernel: [    0.084760] ... version:                3
11-28 13:30 kernel: [    0.084761] ... bit width:              48
11-28 13:30 kernel: [    0.084763] ... generic registers:      4
11-28 13:30 kernel: [    0.084764] ... value mask:             0000ffffffffffff
11-28 13:30 kernel: [    0.084765] ... max period:             0000ffffffffffff
11-28 13:30 kernel: [    0.084766] ... fixed-purpose events:   3
11-28 13:30 kernel: [    0.084768] ... event mask:             000000070000000f
11-28 13:30 kernel: [    0.086133] x86: Booting SMP configuration:
11-28 13:30 kernel: [    0.100262] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
11-28 13:30 kernel: [    0.111712] CPU2 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:30 kernel: [    0.140221] CPU4 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:30 kernel: [    0.168829] CPU6 microcode updated early to revision 0x1a, date = 2014-05-23
11-28 13:30 kernel: [    0.086136] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
11-28 13:30 kernel: [    0.185998] x86: Booted up 1 node, 8 CPUs
11-28 13:30 kernel: [    0.186001] smpboot: Total of 8 processors activated (39905.82 BogoMIPS)
11-28 13:30 kernel: [    0.193106] devtmpfs: initialized
11-28 13:30 kernel: [    0.194825] EVM: security.selinux
11-28 13:30 kernel: [    0.194827] EVM: security.SMACK64
11-28 13:30 kernel: [    0.194828] EVM: security.ima
11-28 13:30 kernel: [    0.194830] EVM: security.capability
11-28 13:30 kernel: [    0.194856] PM: Registering ACPI NVS region [mem 0x9ae7f000-0x9af7efff] (1048576 bytes)
11-28 13:30 kernel: [    0.195481] pinctrl core: initialized pinctrl subsystem
11-28 13:30 kernel: [    0.195528] regulator-dummy: no parameters
11-28 13:30 kernel: [    0.195556] RTC time: 12:30:02, date: 11/28/14
11-28 13:30 kernel: [    0.195582] NET: Registered protocol family 16
11-28 13:30 kernel: [    0.195653] cpuidle: using governor ladder
11-28 13:30 kernel: [    0.195655] cpuidle: using governor menu
11-28 13:30 kernel: [    0.195678] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
11-28 13:30 kernel: [    0.195681] ACPI: bus type PCI registered
11-28 13:30 kernel: [    0.195682] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
11-28 13:30 kernel: [    0.195730] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
11-28 13:30 kernel: [    0.195733] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
11-28 13:30 kernel: [    0.217986] PCI: Using configuration type 1 for base access
11-28 13:30 kernel: [    0.218741] bio: create slab <bio-0> at 0
11-28 13:30 kernel: [    0.218879] ACPI: Added _OSI(Module Device)
11-28 13:30 kernel: [    0.218881] ACPI: Added _OSI(Processor Device)
11-28 13:30 kernel: [    0.218883] ACPI: Added _OSI(3.0 _SCP Extensions)
11-28 13:30 kernel: [    0.218884] ACPI: Added _OSI(Processor Aggregator Device)
11-28 13:30 kernel: [    0.222172] ACPI: Executed 1 blocks of module-level executable AML code
11-28 13:30 kernel: [    0.224653] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
11-28 13:30 kernel: [    0.225694] ACPI: SSDT 000000009ae21c18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20130117)
11-28 13:30 kernel: [    0.226113] ACPI: Dynamic OEM Table Load:
11-28 13:30 kernel: [    0.226115] ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20130117)
11-28 13:30 kernel: [    0.229191] ACPI: SSDT 000000009ae21618 0005AA (v01  PmRef    ApIst 00003000 INTL 20130117)
11-28 13:30 kernel: [    0.229671] ACPI: Dynamic OEM Table Load:
11-28 13:30 kernel: [    0.229673] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20130117)
11-28 13:30 kernel: [    0.233050] ACPI: SSDT 000000009ae19d98 000119 (v01  PmRef    ApCst 00003000 INTL 20130117)
11-28 13:30 kernel: [    0.233465] ACPI: Dynamic OEM Table Load:
11-28 13:30 kernel: [    0.233467] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20130117)
11-28 13:30 kernel: [    0.381242] ACPI: Interpreter enabled
11-28 13:30 kernel: [    0.381250] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
11-28 13:30 kernel: [    0.381256] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
11-28 13:30 kernel: [    0.381272] ACPI: (supports S0 S3 S4 S5)
11-28 13:30 kernel: [    0.381273] ACPI: Using IOAPIC for interrupt routing
11-28 13:30 kernel: [    0.381296] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
11-28 13:30 kernel: [    0.381456] ACPI: No dock devices found.
11-28 13:30 kernel: [    0.604253] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
11-28 13:30 kernel: [    0.604259] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
11-28 13:30 kernel: [    0.604553] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
11-28 13:30 kernel: [    0.604725] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
11-28 13:30 kernel: [    0.604728] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
11-28 13:30 kernel: [    0.604731] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
11-28 13:30 kernel: [    0.604733] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
11-28 13:30 kernel: [    0.605168] PCI host bridge to bus 0000:00
11-28 13:30 kernel: [    0.605171] pci_bus 0000:00: root bus resource [bus 00-fe]
11-28 13:30 kernel: [    0.605173] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
11-28 13:30 kernel: [    0.605175] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
11-28 13:30 kernel: [    0.605177] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
11-28 13:30 kernel: [    0.605179] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
11-28 13:30 kernel: [    0.605181] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
11-28 13:30 kernel: [    0.605183] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
11-28 13:30 kernel: [    0.605185] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
11-28 13:30 kernel: [    0.605186] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
11-28 13:30 kernel: [    0.605188] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
11-28 13:30 kernel: [    0.605190] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
11-28 13:30 kernel: [    0.605192] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
11-28 13:30 kernel: [    0.605194] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
11-28 13:30 kernel: [    0.605196] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
11-28 13:30 kernel: [    0.605198] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
11-28 13:30 kernel: [    0.605200] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
11-28 13:30 kernel: [    0.605201] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
11-28 13:30 kernel: [    0.605203] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
11-28 13:30 kernel: [    0.605211] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
11-28 13:30 kernel: [    0.605330] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
11-28 13:30 kernel: [    0.605359] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.605447] pci 0000:00:01.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.605475] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
11-28 13:30 kernel: [    0.605485] pci 0000:00:02.0: reg 0x10: [mem 0xd2000000-0xd23fffff 64bit]
11-28 13:30 kernel: [    0.605491] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
11-28 13:30 kernel: [    0.605495] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
11-28 13:30 kernel: [    0.605606] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
11-28 13:30 kernel: [    0.605616] pci 0000:00:03.0: reg 0x10: [mem 0xd2610000-0xd2613fff 64bit]
11-28 13:30 kernel: [    0.605751] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
11-28 13:30 kernel: [    0.605771] pci 0000:00:14.0: reg 0x10: [mem 0xd2600000-0xd260ffff 64bit]
11-28 13:30 kernel: [    0.605827] pci 0000:00:14.0: PME# supported from D3hot D3cold
11-28 13:30 kernel: [    0.605918] pci 0000:00:14.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.605944] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
11-28 13:30 kernel: [    0.605963] pci 0000:00:16.0: reg 0x10: [mem 0xd2618000-0xd261800f 64bit]
11-28 13:30 kernel: [    0.606023] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.606137] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
11-28 13:30 kernel: [    0.606157] pci 0000:00:1a.0: reg 0x10: [mem 0xd261d000-0xd261d3ff]
11-28 13:30 kernel: [    0.606241] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.606333] pci 0000:00:1a.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.606361] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
11-28 13:30 kernel: [    0.606375] pci 0000:00:1b.0: reg 0x10: [mem 0xd2614000-0xd2617fff 64bit]
11-28 13:30 kernel: [    0.606436] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.606520] pci 0000:00:1b.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.606543] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
11-28 13:30 kernel: [    0.606605] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.606689] pci 0000:00:1c.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.606713] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
11-28 13:30 kernel: [    0.606773] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.606868] pci 0000:00:1c.2: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.606891] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
11-28 13:30 kernel: [    0.606952] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.607037] pci 0000:00:1c.3: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.607069] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
11-28 13:30 kernel: [    0.607089] pci 0000:00:1d.0: reg 0x10: [mem 0xd261c000-0xd261c3ff]
11-28 13:30 kernel: [    0.607172] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
11-28 13:30 kernel: [    0.607265] pci 0000:00:1d.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.607291] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
11-28 13:30 kernel: [    0.607487] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
11-28 13:30 kernel: [    0.607502] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
11-28 13:30 kernel: [    0.607510] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
11-28 13:30 kernel: [    0.607517] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
11-28 13:30 kernel: [    0.607524] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
11-28 13:30 kernel: [    0.607532] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
11-28 13:30 kernel: [    0.607540] pci 0000:00:1f.2: reg 0x24: [mem 0xd261b000-0xd261b7ff]
11-28 13:30 kernel: [    0.607575] pci 0000:00:1f.2: PME# supported from D3hot
11-28 13:30 kernel: [    0.607673] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
11-28 13:30 kernel: [    0.607688] pci 0000:00:1f.3: reg 0x10: [mem 0xd2619000-0xd26190ff 64bit]
11-28 13:30 kernel: [    0.607707] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
11-28 13:30 kernel: [    0.607858] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030000
11-28 13:30 kernel: [    0.607871] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
11-28 13:30 kernel: [    0.607885] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
11-28 13:30 kernel: [    0.607898] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
11-28 13:30 kernel: [    0.607907] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
11-28 13:30 kernel: [    0.607916] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
11-28 13:30 kernel: [    0.607980] pci 0000:01:00.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.613637] pci 0000:00:01.0: PCI bridge to [bus 01-06]
11-28 13:30 kernel: [    0.613640] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
11-28 13:30 kernel: [    0.613642] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd1ffffff]
11-28 13:30 kernel: [    0.613645] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
11-28 13:30 kernel: [    0.613696] pci 0000:00:1c.0: PCI bridge to [bus 07]
11-28 13:30 kernel: [    0.613957] pci 0000:08:00.0: [1969:e091] type 00 class 0x020000
11-28 13:30 kernel: [    0.614288] pci 0000:08:00.0: reg 0x10: [mem 0xd2500000-0xd253ffff 64bit]
11-28 13:30 kernel: [    0.614433] pci 0000:08:00.0: reg 0x18: [io  0x3000-0x307f]
11-28 13:30 kernel: [    0.615714] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
11-28 13:30 kernel: [    0.615985] pci 0000:08:00.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.621750] pci 0000:00:1c.2: PCI bridge to [bus 08]
11-28 13:30 kernel: [    0.621754] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
11-28 13:30 kernel: [    0.621758] pci 0000:00:1c.2:   bridge window [mem 0xd2500000-0xd25fffff]
11-28 13:30 kernel: [    0.621831] pci 0000:09:00.0: [10ec:5209] type 00 class 0xff0000
11-28 13:30 kernel: [    0.621849] pci 0000:09:00.0: reg 0x10: [mem 0xd2401000-0xd2401fff]
11-28 13:30 kernel: [    0.621969] pci 0000:09:00.0: supports D1 D2
11-28 13:30 kernel: [    0.621971] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
11-28 13:30 kernel: [    0.621995] pci 0000:09:00.0: System wakeup disabled by ACPI
11-28 13:30 kernel: [    0.622030] pci 0000:09:00.1: [10ec:5209] type 00 class 0x080500
11-28 13:30 kernel: [    0.622047] pci 0000:09:00.1: reg 0x10: [mem 0xd2400000-0xd24000ff]
11-28 13:30 kernel: [    0.622168] pci 0000:09:00.1: supports D1 D2
11-28 13:30 kernel: [    0.622169] pci 0000:09:00.1: PME# supported from D1 D2 D3hot
11-28 13:30 kernel: [    0.629671] pci 0000:00:1c.3: PCI bridge to [bus 09]
11-28 13:30 kernel: [    0.629677] pci 0000:00:1c.3:   bridge window [mem 0xd2400000-0xd24fffff]
11-28 13:30 kernel: [    0.702269] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702353] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702391] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702430] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702468] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702506] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702544] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
11-28 13:30 kernel: [    0.702909] ACPI: Enabled 7 GPEs in block 00 to 3F
11-28 13:30 kernel: [    0.702916] ACPI: \_SB_.PCI0: notify handler is installed
11-28 13:30 kernel: [    0.702974] Found 1 acpi root devices
11-28 13:30 kernel: [    0.703000] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
11-28 13:30 kernel: [    0.703070] vgaarb: setting as boot device: PCI:0000:00:02.0
11-28 13:30 kernel: [    0.703073] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
11-28 13:30 kernel: [    0.703078] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
11-28 13:30 kernel: [    0.703080] vgaarb: loaded
11-28 13:30 kernel: [    0.703081] vgaarb: bridge control possible 0000:01:00.0
11-28 13:30 kernel: [    0.703083] vgaarb: no bridge control possible 0000:00:02.0
11-28 13:30 kernel: [    0.703195] SCSI subsystem initialized
11-28 13:30 kernel: [    0.703230] libata version 3.00 loaded.
11-28 13:30 kernel: [    0.703243] ACPI: bus type USB registered
11-28 13:30 kernel: [    0.703256] usbcore: registered new interface driver usbfs
11-28 13:30 kernel: [    0.703262] usbcore: registered new interface driver hub
11-28 13:30 kernel: [    0.703278] usbcore: registered new device driver usb
11-28 13:30 kernel: [    0.703375] PCI: Using ACPI for IRQ routing
11-28 13:30 kernel: [    0.709012] PCI: pci_cache_line_size set to 64 bytes
11-28 13:30 kernel: [    0.709160] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
11-28 13:30 kernel: [    0.709162] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
11-28 13:30 kernel: [    0.709163] e820: reserve RAM buffer [mem 0x94d70000-0x97ffffff]
11-28 13:30 kernel: [    0.709164] e820: reserve RAM buffer [mem 0x9a37f000-0x9bffffff]
11-28 13:30 kernel: [    0.709165] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
11-28 13:30 kernel: [    0.709166] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
11-28 13:30 kernel: [    0.709221] NetLabel: Initializing
11-28 13:30 kernel: [    0.709222] NetLabel:  domain hash size = 128
11-28 13:30 kernel: [    0.709224] NetLabel:  protocols = UNLABELED CIPSOv4
11-28 13:30 kernel: [    0.709233] NetLabel:  unlabeled traffic allowed by default
11-28 13:30 kernel: [    0.709267] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
11-28 13:30 kernel: [    0.709273] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
11-28 13:30 kernel: [    0.712307] Switched to clocksource hpet
11-28 13:30 kernel: [    0.715745] AppArmor: AppArmor Filesystem Enabled
11-28 13:30 kernel: [    0.715760] pnp: PnP ACPI init
11-28 13:30 kernel: [    0.715768] ACPI: bus type PNP registered
11-28 13:30 kernel: [    0.715792] pnp 00:00: [dma 4]
11-28 13:30 kernel: [    0.715805] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
11-28 13:30 kernel: [    0.715819] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
11-28 13:30 kernel: [    0.715900] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
11-28 13:30 kernel: [    0.715935] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
11-28 13:30 kernel: [    0.715966] system 00:04: [io  0x0680-0x069f] has been reserved
11-28 13:30 kernel: [    0.715969] system 00:04: [io  0xffff] has been reserved
11-28 13:30 kernel: [    0.715971] system 00:04: [io  0xffff] has been reserved
11-28 13:30 kernel: [    0.715973] system 00:04: [io  0xffff] has been reserved
11-28 13:30 kernel: [    0.715975] system 00:04: [io  0x0400-0x0453] has been reserved
11-28 13:30 kernel: [    0.715977] system 00:04: [io  0x0800-0x08fe] has been reserved
11-28 13:30 kernel: [    0.715979] system 00:04: [io  0x0900-0x09fe] has been reserved
11-28 13:30 kernel: [    0.715981] system 00:04: [io  0x0a00-0x0afe] has been reserved
11-28 13:30 kernel: [    0.715983] system 00:04: [io  0x0b00-0x0bfe] has been reserved
11-28 13:30 kernel: [    0.715985] system 00:04: [io  0x1800-0x18fe] could not be reserved
11-28 13:30 kernel: [    0.715987] system 00:04: [io  0x164e-0x164f] has been reserved
11-28 13:30 kernel: [    0.715989] system 00:04: [io  0xfd60-0xfd63] has been reserved
11-28 13:30 kernel: [    0.715991] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
11-28 13:30 kernel: [    0.716007] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
11-28 13:30 kernel: [    0.716038] system 00:06: [io  0x1854-0x1857] has been reserved
11-28 13:30 kernel: [    0.716041] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
11-28 13:30 kernel: [    0.784441] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
11-28 13:30 kernel: [    0.784461] pnp 00:08: Plug and Play ACPI device, IDs DLL05a9 PNP0f13 (active)
11-28 13:30 kernel: [    0.784484] pnp 00:09: Plug and Play ACPI device, IDs SMO8810 (active)
11-28 13:30 kernel: [    0.784574] pnp 00:0a: disabling [mem 0xffffffff-0x100000ffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
11-28 13:30 kernel: [    0.784590] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
11-28 13:30 kernel: [    0.784592] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
11-28 13:30 kernel: [    0.784594] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
11-28 13:30 kernel: [    0.784597] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
11-28 13:30 kernel: [    0.784599] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
11-28 13:30 kernel: [    0.784601] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
11-28 13:30 kernel: [    0.784603] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
11-28 13:30 kernel: [    0.784605] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
11-28 13:30 kernel: [    0.784607] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
11-28 13:30 kernel: [    0.784609] system 00:0a: [mem 0x9fa11000-0x9fa11fff] has been reserved
11-28 13:30 kernel: [    0.784612] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
11-28 13:30 kernel: [    0.785054] pnp: PnP ACPI: found 11 devices
11-28 13:30 kernel: [    0.785055] ACPI: bus type PNP unregistered
11-28 13:30 kernel: [    0.790878] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
11-28 13:30 kernel: [    0.790894] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
11-28 13:30 kernel: [    0.790896] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
11-28 13:30 kernel: [    0.790898] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
11-28 13:30 kernel: [    0.790913] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
11-28 13:30 kernel: [    0.790914] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
11-28 13:30 kernel: [    0.790916] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
11-28 13:30 kernel: [    0.790920] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
11-28 13:30 kernel: [    0.790924] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
11-28 13:30 kernel: [    0.790927] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
11-28 13:30 kernel: [    0.790930] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
11-28 13:30 kernel: [    0.790933] pci 0000:00:01.0: PCI bridge to [bus 01-06]
11-28 13:30 kernel: [    0.790935] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
11-28 13:30 kernel: [    0.790938] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd1ffffff]
11-28 13:30 kernel: [    0.790941] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
11-28 13:30 kernel: [    0.790945] pci 0000:00:1c.0: PCI bridge to [bus 07]
11-28 13:30 kernel: [    0.790948] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
11-28 13:30 kernel: [    0.790953] pci 0000:00:1c.0:   bridge window [mem 0x9fb00000-0x9fcfffff]
11-28 13:30 kernel: [    0.790957] pci 0000:00:1c.0:   bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
11-28 13:30 kernel: [    0.790964] pci 0000:00:1c.2: PCI bridge to [bus 08]
11-28 13:30 kernel: [    0.790967] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
11-28 13:30 kernel: [    0.790972] pci 0000:00:1c.2:   bridge window [mem 0xd2500000-0xd25fffff]
11-28 13:30 kernel: [    0.790981] pci 0000:00:1c.3: PCI bridge to [bus 09]
11-28 13:30 kernel: [    0.790986] pci 0000:00:1c.3:   bridge window [mem 0xd2400000-0xd24fffff]
11-28 13:30 kernel: [    0.790994] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
11-28 13:30 kernel: [    0.790996] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
11-28 13:30 kernel: [    0.790997] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
11-28 13:30 kernel: [    0.790998] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
11-28 13:30 kernel: [    0.790999] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
11-28 13:30 kernel: [    0.791001] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
11-28 13:30 kernel: [    0.791002] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
11-28 13:30 kernel: [    0.791003] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
11-28 13:30 kernel: [    0.791004] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
11-28 13:30 kernel: [    0.791006] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
11-28 13:30 kernel: [    0.791007] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
11-28 13:30 kernel: [    0.791008] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
11-28 13:30 kernel: [    0.791009] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
11-28 13:30 kernel: [    0.791010] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
11-28 13:30 kernel: [    0.791012] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
11-28 13:30 kernel: [    0.791013] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
11-28 13:30 kernel: [    0.791014] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
11-28 13:30 kernel: [    0.791016] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
11-28 13:30 kernel: [    0.791017] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
11-28 13:30 kernel: [    0.791018] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
11-28 13:30 kernel: [    0.791019] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
11-28 13:30 kernel: [    0.791021] pci_bus 0000:07: resource 1 [mem 0x9fb00000-0x9fcfffff]
11-28 13:30 kernel: [    0.791022] pci_bus 0000:07: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
11-28 13:30 kernel: [    0.791023] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
11-28 13:30 kernel: [    0.791025] pci_bus 0000:08: resource 1 [mem 0xd2500000-0xd25fffff]
11-28 13:30 kernel: [    0.791026] pci_bus 0000:09: resource 1 [mem 0xd2400000-0xd24fffff]
11-28 13:30 kernel: [    0.791049] NET: Registered protocol family 2
11-28 13:30 kernel: [    0.791208] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
11-28 13:30 kernel: [    0.791327] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
11-28 13:30 kernel: [    0.791447] TCP: Hash tables configured (established 65536 bind 65536)
11-28 13:30 kernel: [    0.791461] TCP: reno registered
11-28 13:30 kernel: [    0.791471] UDP hash table entries: 4096 (order: 5, 131072 bytes)
11-28 13:30 kernel: [    0.791496] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
11-28 13:30 kernel: [    0.791548] NET: Registered protocol family 1
11-28 13:30 kernel: [    0.791557] pci 0000:00:02.0: Video device with shadowed ROM
11-28 13:30 kernel: [    0.824530] pci 0000:08:00.0: set MSI_INTX_DISABLE_BUG flag
11-28 13:30 kernel: [    0.824575] PCI: CLS 64 bytes, default 64
11-28 13:30 kernel: [    0.824613] Trying to unpack rootfs image as initramfs...
11-28 13:30 kernel: [    1.086030] Freeing initrd memory: 18896K (ffff880035b08000 - ffff880036d7c000)
11-28 13:30 kernel: [    1.086038] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
11-28 13:30 kernel: [    1.086041] software IO TLB [mem 0x8ed80000-0x92d80000] (64MB) mapped at [ffff88008ed80000-ffff880092d7ffff]
11-28 13:30 kernel: [    1.086088] Simple Boot Flag at 0x44 set to 0x1
11-28 13:30 kernel: [    1.086277] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086285] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086291] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086299] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086304] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086311] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086317] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086326] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1a
11-28 13:30 kernel: [    1.086366] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
11-28 13:30 kernel: [    1.086370] Scanning for low memory corruption every 60 seconds
11-28 13:30 kernel: [    1.086574] Initialise system trusted keyring
11-28 13:30 kernel: [    1.086610] audit: initializing netlink socket (disabled)
11-28 13:30 kernel: [    1.086618] type=2000 audit(1417177803.076:1): initialized
11-28 13:30 kernel: [    1.109900] HugeTLB registered 2 MB page size, pre-allocated 0 pages
11-28 13:30 kernel: [    1.110705] zbud: loaded
11-28 13:30 kernel: [    1.110820] VFS: Disk quotas dquot_6.5.2
11-28 13:30 kernel: [    1.110850] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
11-28 13:30 kernel: [    1.111132] fuse init (API version 7.22)
11-28 13:30 kernel: [    1.111183] msgmni has been set to 15726
11-28 13:30 kernel: [    1.111220] Key type big_key registered
11-28 13:30 kernel: [    1.111583] Key type asymmetric registered
11-28 13:30 kernel: [    1.111585] Asymmetric key parser 'x509' registered
11-28 13:30 kernel: [    1.111605] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
11-28 13:30 kernel: [    1.111645] io scheduler noop registered
11-28 13:30 kernel: [    1.111647] io scheduler deadline registered (default)
11-28 13:30 kernel: [    1.111662] io scheduler cfq registered
11-28 13:30 kernel: [    1.111708] pcieport 0000:00:01.0: device [8086:0c01] has invalid IRQ; check vendor BIOS
11-28 13:30 kernel: [    1.111811] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
11-28 13:30 kernel: [    1.111842] pcieport 0000:00:1c.0: device [8086:8c10] has invalid IRQ; check vendor BIOS
11-28 13:30 kernel: [    1.111931] pcieport 0000:00:1c.2: device [8086:8c14] has invalid IRQ; check vendor BIOS
11-28 13:30 kernel: [    1.112016] pcieport 0000:00:1c.3: device [8086:8c16] has invalid IRQ; check vendor BIOS
11-28 13:30 kernel: [    1.112113] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
11-28 13:30 kernel: [    1.112123] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
11-28 13:30 kernel: [    1.112149] efifb: probing for efifb
11-28 13:30 kernel: [    1.112926] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
11-28 13:30 kernel: [    1.112928] efifb: mode is 1920x1080x32, linelength=7680, pages=1
11-28 13:30 kernel: [    1.112929] efifb: scrolling: redraw
11-28 13:30 kernel: [    1.112931] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
11-28 13:30 kernel: [    1.117307] Console: switching to colour frame buffer device 240x67
11-28 13:30 kernel: [    1.121603] fb0: EFI VGA frame buffer device
11-28 13:30 kernel: [    1.121632] intel_idle: MWAIT substates: 0x42120
11-28 13:30 kernel: [    1.121633] intel_idle: v0.4 model 0x3C
11-28 13:30 kernel: [    1.121634] intel_idle: lapic_timer_reliable_states 0xffffffff
11-28 13:30 kernel: [    1.121767] ipmi message handler version 39.2
11-28 13:30 kernel: [    1.121812] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
11-28 13:30 kernel: [    1.121877] ACPI: AC Adapter [ACAD] (on-line)
11-28 13:30 kernel: [    1.121971] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
11-28 13:30 kernel: [    1.122008] ACPI: Power Button [PWRB]
11-28 13:30 kernel: [    1.122051] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
11-28 13:30 kernel: [    1.122097] ACPI: Lid Switch [LID0]
11-28 13:30 kernel: [    1.122131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
11-28 13:30 kernel: [    1.122158] ACPI: Power Button [PWRF]
11-28 13:30 kernel: [    1.122471] GHES: HEST is not enabled!
11-28 13:30 kernel: [    1.122547] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
11-28 13:30 kernel: [    1.361083] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
11-28 13:30 kernel: [    1.361119] ACPI: Battery Slot [BAT1] (battery present)
11-28 13:30 kernel: [    1.361230] Linux agpgart interface v0.103
11-28 13:30 kernel: [    1.362136] brd: module loaded
11-28 13:30 kernel: [    1.362566] loop: module loaded
11-28 13:30 kernel: [    1.362814] libphy: Fixed MDIO Bus: probed
11-28 13:30 kernel: [    1.362885] tun: Universal TUN/TAP device driver, 1.6
11-28 13:30 kernel: [    1.362904] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
11-28 13:30 kernel: [    1.362979] PPP generic driver version 2.4.2
11-28 13:30 kernel: [    1.363029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
11-28 13:30 kernel: [    1.363055] ehci-pci: EHCI PCI platform driver
11-28 13:30 kernel: [    1.363167] ehci-pci 0000:00:1a.0: EHCI Host Controller
11-28 13:30 kernel: [    1.363190] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
11-28 13:30 kernel: [    1.363227] ehci-pci 0000:00:1a.0: debug port 2
11-28 13:30 kernel: [    1.367151] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
11-28 13:30 kernel: [    1.367167] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd261d000
11-28 13:30 kernel: [    1.377066] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
11-28 13:30 kernel: [    1.377118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
11-28 13:30 kernel: [    1.377143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:30 kernel: [    1.377169] usb usb1: Product: EHCI Host Controller
11-28 13:30 kernel: [    1.377187] usb usb1: Manufacturer: Linux 3.13.0-40-generic ehci_hcd
11-28 13:30 kernel: [    1.377210] usb usb1: SerialNumber: 0000:00:1a.0
11-28 13:30 kernel: [    1.377307] hub 1-0:1.0: USB hub found
11-28 13:30 kernel: [    1.377326] hub 1-0:1.0: 2 ports detected
11-28 13:30 kernel: [    1.377501] ehci-pci 0000:00:1d.0: EHCI Host Controller
11-28 13:30 kernel: [    1.377521] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
11-28 13:30 kernel: [    1.377556] ehci-pci 0000:00:1d.0: debug port 2
11-28 13:30 kernel: [    1.381479] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
11-28 13:30 kernel: [    1.381493] ehci-pci 0000:00:1d.0: irq 19, io mem 0xd261c000
11-28 13:30 kernel: [    1.393068] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
11-28 13:30 kernel: [    1.393118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
11-28 13:30 kernel: [    1.393143] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:30 kernel: [    1.394242] usb usb2: Product: EHCI Host Controller
11-28 13:30 kernel: [    1.395342] usb usb2: Manufacturer: Linux 3.13.0-40-generic ehci_hcd
11-28 13:30 kernel: [    1.396446] usb usb2: SerialNumber: 0000:00:1d.0
11-28 13:30 kernel: [    1.397643] hub 2-0:1.0: USB hub found
11-28 13:30 kernel: [    1.398730] hub 2-0:1.0: 2 ports detected
11-28 13:30 kernel: [    1.399880] ehci-platform: EHCI generic platform driver
11-28 13:30 kernel: [    1.400850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
11-28 13:30 kernel: [    1.401952] ohci-pci: OHCI PCI platform driver
11-28 13:30 kernel: [    1.403044] ohci-platform: OHCI generic platform driver
11-28 13:30 kernel: [    1.404128] uhci_hcd: USB Universal Host Controller Interface driver
11-28 13:30 kernel: [    1.405302] xhci_hcd 0000:00:14.0: xHCI Host Controller
11-28 13:30 kernel: [    1.406373] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
11-28 13:30 kernel: [    1.407525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
11-28 13:30 kernel: [    1.407541] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
11-28 13:30 kernel: [    1.407588] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
11-28 13:30 kernel: [    1.408652] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:30 kernel: [    1.409717] usb usb3: Product: xHCI Host Controller
11-28 13:30 kernel: [    1.410762] usb usb3: Manufacturer: Linux 3.13.0-40-generic xhci_hcd
11-28 13:30 kernel: [    1.411810] usb usb3: SerialNumber: 0000:00:14.0
11-28 13:30 kernel: [    1.412936] hub 3-0:1.0: USB hub found
11-28 13:30 kernel: [    1.413988] hub 3-0:1.0: 14 ports detected
11-28 13:30 kernel: [    1.416643] xhci_hcd 0000:00:14.0: xHCI Host Controller
11-28 13:30 kernel: [    1.417670] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
11-28 13:30 kernel: [    1.418730] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
11-28 13:30 kernel: [    1.419756] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-28 13:30 kernel: [    1.420782] usb usb4: Product: xHCI Host Controller
11-28 13:30 kernel: [    1.421808] usb usb4: Manufacturer: Linux 3.13.0-40-generic xhci_hcd
11-28 13:30 kernel: [    1.422829] usb usb4: SerialNumber: 0000:00:14.0
11-28 13:30 kernel: [    1.423935] hub 4-0:1.0: USB hub found
11-28 13:30 kernel: [    1.424948] hub 4-0:1.0: 6 ports detected
11-28 13:30 kernel: [    1.433254] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
11-28 13:30 kernel: [    1.479112] serio: i8042 KBD port at 0x60,0x64 irq 1
11-28 13:30 kernel: [    1.480098] serio: i8042 AUX port at 0x60,0x64 irq 12
11-28 13:30 kernel: [    1.481284] mousedev: PS/2 mouse device common for all mice
11-28 13:30 kernel: [    1.482459] rtc_cmos 00:05: RTC can wake from S4
11-28 13:30 kernel: [    1.483530] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
11-28 13:30 kernel: [    1.484505] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
11-28 13:30 kernel: [    1.485524] device-mapper: uevent: version 1.0.3
11-28 13:30 kernel: [    1.486533] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
11-28 13:30 kernel: [    1.487487] ledtrig-cpu: registered to indicate activity on CPUs
11-28 13:30 kernel: [    1.488424] EFI Variables Facility v0.08 2004-May-17
11-28 13:30 kernel: [    1.529796] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
11-28 13:30 kernel: [    1.583072] TCP: cubic registered
11-28 13:30 kernel: [    1.584097] NET: Registered protocol family 10
11-28 13:30 kernel: [    1.585189] NET: Registered protocol family 17
11-28 13:30 kernel: [    1.586160] Key type dns_resolver registered
11-28 13:30 kernel: [    1.587647] Loading compiled-in X.509 certificates
11-28 13:30 kernel: [    1.589327] Loaded X.509 cert 'Magrathea: Glacier signing key: 35728cdb88aa70fdd3acd153a37b513192a47fd8'
11-28 13:30 kernel: [    1.590316] registered taskstats version 1
11-28 13:30 kernel: [    1.593260] Key type trusted registered
11-28 13:30 kernel: [    1.596087] Key type encrypted registered
11-28 13:30 kernel: [    1.598872] AppArmor: AppArmor sha1 policy hashing enabled
11-28 13:30 kernel: [    1.599729] IMA: No TPM chip found, activating TPM-bypass!
11-28 13:30 kernel: [    1.601703] regulator-dummy: disabling
11-28 13:30 kernel: [    1.602807]   Magic number: 6:884:532
11-28 13:30 kernel: [    1.603780] bdi 1:10: hash matches
11-28 13:30 kernel: [    1.604743] tty ttyS12: hash matches
11-28 13:30 kernel: [    1.605798] rtc_cmos 00:05: setting system clock to 2014-11-28 12:30:04 UTC (1417177804)
11-28 13:30 kernel: [    1.607965] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
11-28 13:30 kernel: [    1.608708] EDD information not available.
11-28 13:30 kernel: [    1.609476] PM: Hibernation image not present or could not be loaded.
11-28 13:30 kernel: [    1.610028] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
11-28 13:30 kernel: [    1.610751] Write protecting the kernel read-only data: 12288k
11-28 13:30 kernel: [    1.612827] Freeing unused kernel memory: 804K (ffff880002737000 - ffff880002800000)
11-28 13:30 kernel: [    1.614651] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
11-28 13:30 kernel: [    1.625159] systemd-udevd[146]: starting version 204
11-28 13:30 kernel: [    1.638948] sdhci: Secure Digital Host Controller Interface driver
11-28 13:30 kernel: [    1.639743] sdhci: Copyright(c) Pierre Ossman
11-28 13:30 kernel: [    1.640733] rtsx_pci 0000:09:00.0: irq 42 for MSI/MSI-X
11-28 13:30 kernel: [    1.640745] rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
11-28 13:30 kernel: [    1.642061] sdhci-pci 0000:09:00.1: SDHCI controller found [10ec:5209] (rev 1)
11-28 13:30 kernel: [    1.643255] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
11-28 13:30 kernel: [    1.644345] sdhci-pci 0000:09:00.1: dummy supplies not allowed
11-28 13:30 kernel: [    1.645418] mmc0: no vqmmc regulator found
11-28 13:30 kernel: [    1.646397] sdhci-pci 0000:09:00.1: dummy supplies not allowed
11-28 13:30 kernel: [    1.647661] mmc0: no vmmc regulator found
11-28 13:30 kernel: [    1.648714] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
11-28 13:30 kernel: [    1.649872] ahci 0000:00:1f.2: version 3.0
11-28 13:30 kernel: [    1.649880] mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA
11-28 13:30 kernel: [    1.649980] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
11-28 13:30 kernel: [    1.650007] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
11-28 13:30 kernel: [    1.650033] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
11-28 13:30 kernel: [    1.650034] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
11-28 13:30 kernel: [    1.664682] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [34:e6:d7:04:70:73]
11-28 13:30 kernel: [    1.665814] scsi0 : ahci
11-28 13:30 kernel: [    1.666714] scsi1 : ahci
11-28 13:30 kernel: [    1.667588] scsi2 : ahci
11-28 13:30 kernel: [    1.668495] scsi3 : ahci
11-28 13:30 kernel: [    1.669373] scsi4 : ahci
11-28 13:30 kernel: [    1.670156] scsi5 : ahci
11-28 13:30 kernel: [    1.670944] ata1: SATA max UDMA/133 abar m2048@0xd261b000 port 0xd261b100 irq 43
11-28 13:30 kernel: [    1.671757] ata2: DUMMY
11-28 13:30 kernel: [    1.672519] ata3: DUMMY
11-28 13:30 kernel: [    1.673263] ata4: DUMMY
11-28 13:30 kernel: [    1.674051] ata5: SATA max UDMA/133 abar m2048@0xd261b000 port 0xd261b300 irq 43
11-28 13:30 kernel: [    1.674853] ata6: SATA max UDMA/133 abar m2048@0xd261b000 port 0xd261b380 irq 43
11-28 13:30 kernel: [    1.689443] usb 1-1: new high-speed USB device number 2 using ehci-pci
11-28 13:30 kernel: [    1.693521] systemd-udevd[149]: renamed network interface eth0 to p2p1
11-28 13:30 kernel: [    1.822033] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
11-28 13:30 kernel: [    1.823113] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
11-28 13:30 kernel: [    1.824296] hub 1-1:1.0: USB hub found
11-28 13:30 kernel: [    1.825142] hub 1-1:1.0: 6 ports detected
11-28 13:30 kernel: [    1.937721] usb 2-1: new high-speed USB device number 2 using ehci-pci
11-28 13:30 kernel: [    1.993790] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
11-28 13:30 kernel: [    1.998100] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
11-28 13:30 kernel: [    1.999377] ata1.00: ATA-9: WDC WD10JFCX-68N6GN0, 82.00A82, max UDMA/133
11-28 13:30 kernel: [    2.000347] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
11-28 13:30 kernel: [    2.001981] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
11-28 13:30 kernel: [    2.003189] ata1.00: configured for UDMA/133
11-28 13:30 kernel: [    2.004329] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JFCX-68N 82.0 PQ: 0 ANSI: 5
11-28 13:30 kernel: [    2.005509] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
11-28 13:30 kernel: [    2.005543] sd 0:0:0:0: Attached scsi generic sg0 type 0
11-28 13:30 kernel: [    2.007288] sd 0:0:0:0: [sda] 4096-byte physical blocks
11-28 13:30 kernel: [    2.008102] sd 0:0:0:0: [sda] Write Protect is off
11-28 13:30 kernel: [    2.008859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
11-28 13:30 kernel: [    2.008865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
11-28 13:30 kernel: [    2.016875]  sda: sda1 sda2
11-28 13:30 kernel: [    2.018255] sd 0:0:0:0: [sda] Attached SCSI disk
11-28 13:30 kernel: [    2.070303] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
11-28 13:30 kernel: [    2.071333] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
11-28 13:30 kernel: [    2.072546] hub 2-1:1.0: USB hub found
11-28 13:30 kernel: [    2.074040] hub 2-1:1.0: 8 ports detected
11-28 13:30 kernel: [    2.085878] tsc: Refined TSC clocksource calibration: 2494.225 MHz
11-28 13:30 kernel: [    2.242054] usb 3-3: new full-speed USB device number 2 using xhci_hcd
11-28 13:30 kernel: [    2.260698] usb 3-3: New USB device found, idVendor=046d, idProduct=c52b
11-28 13:30 kernel: [    2.261800] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
11-28 13:30 kernel: [    2.262543] usb 3-3: Product: USB Receiver
11-28 13:30 kernel: [    2.263308] usb 3-3: Manufacturer: Logitech
11-28 13:30 kernel: [    2.267154] hidraw: raw HID events driver (C) Jiri Kosina
11-28 13:30 kernel: [    2.272152] usbcore: registered new interface driver usbhid
11-28 13:30 kernel: [    2.273197] usbhid: USB HID core driver
11-28 13:30 kernel: [    2.275977] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
11-28 13:30 kernel: [    2.326143] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
11-28 13:30 kernel: [    2.330453] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GS40N, A100, max UDMA/100
11-28 13:30 kernel: [    2.334348] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
11-28 13:30 kernel: [    2.336354] ata5.00: configured for UDMA/100
11-28 13:30 kernel: [    2.342873] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GS40N    A100 PQ: 0 ANSI: 5
11-28 13:30 kernel: [    2.351392] sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
11-28 13:30 kernel: [    2.352496] cdrom: Uniform CD-ROM driver Revision: 3.20
11-28 13:30 kernel: [    2.353523] sr 4:0:0:0: Attached scsi CD-ROM sr0
11-28 13:30 kernel: [    2.353591] sr 4:0:0:0: Attached scsi generic sg1 type 5
11-28 13:30 kernel: [    2.494398] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64dd
11-28 13:30 kernel: [    2.495515] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
11-28 13:30 kernel: [    2.496346] usb 1-1.4: Product: Laptop_Integrated_Webcam_FHD
11-28 13:30 kernel: [    2.497133] usb 1-1.4: Manufacturer: CN0W58PR7248749H05VRA00
11-28 13:30 kernel: [    2.574610] usb 2-1.7: new full-speed USB device number 3 using ehci-pci
11-28 13:30 kernel: [    2.667460] usb 2-1.7: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
11-28 13:30 kernel: [    2.669462] usb 2-1.7: New USB device found, idVendor=187c, idProduct=0525
11-28 13:30 kernel: [    2.670576] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
11-28 13:30 kernel: [    2.671501] usb 2-1.7: Product: M14x
11-28 13:30 kernel: [    2.672280] usb 2-1.7: Manufacturer: Alienware
11-28 13:30 kernel: [    2.673052] usb 2-1.7: SerialNumber: 2.3.0
11-28 13:30 kernel: [    2.674486] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
11-28 13:30 kernel: [    2.676483] hid-generic 0003:187C:0525.0004: hiddev0,hidraw1: USB HID v1.01 Device [Alienware M14x] on usb-0000:00:1d.0-1.7/input0
11-28 13:30 kernel: [    2.687566] ata6.00: ATA-9: INTEL SSDMCEAC120B3, LLLi, max UDMA/133
11-28 13:30 kernel: [    2.688711] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
11-28 13:30 kernel: [    2.697526] ata6.00: configured for UDMA/133
11-28 13:30 kernel: [    2.698826] scsi 5:0:0:0: Direct-Access     ATA      INTEL SSDMCEAC12 LLLi PQ: 0 ANSI: 5
11-28 13:30 kernel: [    2.700077] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
11-28 13:30 kernel: [    2.700120] sd 5:0:0:0: Attached scsi generic sg2 type 0
11-28 13:30 kernel: [    2.701869] sd 5:0:0:0: [sdb] Write Protect is off
11-28 13:30 kernel: [    2.702732] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
11-28 13:30 kernel: [    2.702739] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
11-28 13:30 kernel: [    2.703931]  sdb: sdb1 sdb2 sdb3
11-28 13:30 kernel: [    2.705266] sd 5:0:0:0: [sdb] Attached SCSI disk
11-28 13:30 kernel: [    2.723671] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2417, fw id: 1365292
11-28 13:30 kernel: [    2.740392] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
11-28 13:30 kernel: [    2.801665] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
11-28 13:30 kernel: [    2.857472] random: init urandom read with 74 bits of entropy available
11-28 13:30 kernel: [    2.874647] init: plymouth-upstart-bridge main process (225) terminated with status 1
11-28 13:30 kernel: [    2.876025] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:30 kernel: [    2.881366] init: plymouth-upstart-bridge main process (235) terminated with status 1
11-28 13:30 kernel: [    2.882505] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:30 kernel: [    2.883813] init: ureadahead main process (228) terminated with status 5
11-28 13:30 kernel: [    2.886951] init: plymouth-upstart-bridge main process (239) terminated with status 1
11-28 13:30 kernel: [    2.888221] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:30 kernel: [    3.089091] Switched to clocksource tsc
11-28 13:30 kernel: [    3.126751] EXT4-fs (sdb1): re-mounted. Opts: discard,commit=60,errors=remount-ro
11-28 13:30 kernel: [    3.150963] IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
11-28 13:30 kernel: [    3.166707] systemd-udevd[402]: starting version 204
11-28 13:30 kernel: [    3.179177] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard,commit=60
11-28 13:30 kernel: [    3.190070] wmi: Mapper loaded
11-28 13:30 kernel: [    3.193535] input: Dell WMI hotkeys as /devices/virtual/input/input6
11-28 13:30 kernel: [    3.292499] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
11-28 13:30 kernel: [    3.292508] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292511] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292514] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292516] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
11-28 13:30 kernel: [    3.292517] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292519] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292522] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292523] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 4 (20131115/utaddress-251)
11-28 13:30 kernel: [    3.292525] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
11-28 13:30 kernel: [    3.292525] lpc_ich: Resource conflict(s) found affecting gpio_ich
11-28 13:30 kernel: [    3.298208] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
11-28 13:30 kernel: [    3.302083] [drm] Initialized drm 1.1.0 20060810
11-28 13:30 kernel: [    3.329477] ip_tables: (C) 2000-2006 Netfilter Core Team
11-28 13:30 kernel: [    3.331693] [drm] Memory usable by graphics device = 2048M
11-28 13:30 kernel: [    3.331712] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
11-28 13:30 kernel: [    3.331713] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
11-28 13:30 kernel: [    3.332871] Console: switching to colour dummy device 80x25
11-28 13:30 kernel: [    3.333889] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 kernel: [    3.333927] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 kernel: [    3.333977] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 kernel: [    3.334125] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
11-28 13:30 kernel: [    3.334130] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 kernel: [    3.334509] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 kernel: [    3.334795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 kernel: [    3.337348] random: nonblocking pool is initialized
11-28 13:30 kernel: [    3.340143] type=1400 audit(1417177806.229:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
11-28 13:30 kernel: [    3.340147] type=1400 audit(1417177806.229:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
11-28 13:30 kernel: [    3.340150] type=1400 audit(1417177806.229:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
11-28 13:30 kernel: [    3.340499] type=1400 audit(1417177806.229:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
11-28 13:30 kernel: [    3.340503] type=1400 audit(1417177806.229:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
11-28 13:30 kernel: [    3.340681] type=1400 audit(1417177806.229:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
11-28 13:30 kernel: [    3.343904] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
11-28 13:30 kernel: [    3.349983] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
11-28 13:30 kernel: [    3.349987] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
11-28 13:30 kernel: [    3.350017] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
11-28 13:30 kernel: [    3.361357] ip6_tables: (C) 2000-2006 Netfilter Core Team
11-28 13:30 kernel: [    3.383299] i915 0000:00:02.0: irq 45 for MSI/MSI-X
11-28 13:30 kernel: [    3.383307] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
11-28 13:30 kernel: [    3.383307] [drm] Driver supports precise vblank timestamp query.
11-28 13:30 kernel: [    3.383970] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
11-28 13:30 kernel: [    3.444050] alx 0000:08:00.0: irq 46 for MSI/MSI-X
11-28 13:30 kernel: [    3.444143] IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
11-28 13:30 kernel: [    3.671602] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
11-28 13:30 kernel: [    3.689272] fbcon: inteldrmfb (fb0) is primary device
11-28 13:30 kernel: [    3.886248] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
11-28 13:30 kernel: [    4.094992] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
11-28 13:30 kernel: [    4.477898] alx 0000:08:00.0 p2p1: NIC Up: 1 Gbps Full
11-28 13:30 kernel: [    4.478446] IPv6: ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
11-28 13:30 kernel: [    4.828924] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
11-28 13:30 kernel: [    5.341464] Console: switching to colour frame buffer device 240x67
11-28 13:30 kernel: [    5.347219] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
11-28 13:30 kernel: [    5.347220] i915 0000:00:02.0: registered panic notifier
11-28 13:30 kernel: [    5.347515] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
11-28 13:30 kernel: [    5.347721] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
11-28 13:30 kernel: [    5.347725] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
11-28 13:30 kernel: [    5.347728] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff880253935050), AE_NOT_FOUND (20131115/psparse-536)
11-28 13:30 kernel: [    5.347767] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3d/LNXVIDEO:00/input/input7
11-28 13:30 kernel: [    5.362205] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
11-28 13:30 kernel: [    5.362414] acpi device:58: registered as cooling_device9
11-28 13:30 kernel: [    5.362463] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
11-28 13:30 kernel: [    5.362516] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
11-28 13:30 kernel: [    5.362626] [drm] hdmi device  not found 1 0 1
11-28 13:30 kernel: [    5.362730] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e7240a2
11-28 13:30 kernel: [    5.362732] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
11-28 13:30 kernel: [    5.362733] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
11-28 13:30 kernel: [    5.362890] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
11-28 13:30 kernel: [    5.362952] HDA driver get symbol successfully from i915 module
11-28 13:30 kernel: [    5.363908] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
11-28 13:30 kernel: [    5.412091] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
11-28 13:30 kernel: [    5.412092] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
11-28 13:30 kernel: [    5.412122] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
11-28 13:30 kernel: [    5.412155] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
11-28 13:30 kernel: [    5.412156] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
11-28 13:30 kernel: [    5.421064] SKU: Nid=0x1d sku_cfg=0x41000001
11-28 13:30 kernel: [    5.421064] SKU: port_connectivity=0x1
11-28 13:30 kernel: [    5.421065] SKU: enable_pcbeep=0x0
11-28 13:30 kernel: [    5.421065] SKU: check_sum=0x00000000
11-28 13:30 kernel: [    5.421065] SKU: customization=0x00000000
11-28 13:30 kernel: [    5.421065] SKU: external_amp=0x0
11-28 13:30 kernel: [    5.421065] SKU: platform_type=0x0
11-28 13:30 kernel: [    5.421066] SKU: swap=0x0
11-28 13:30 kernel: [    5.421066] SKU: override=0x1
11-28 13:30 kernel: [    5.421270] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
11-28 13:30 kernel: [    5.421270]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
11-28 13:30 kernel: [    5.421271]    hp_outs=2 (0x15/0x16/0x0/0x0/0x0)
11-28 13:30 kernel: [    5.421271]    mono: mono_out=0x0
11-28 13:30 kernel: [    5.421271]    inputs:
11-28 13:30 kernel: [    5.421272]      Mic=0x19
11-28 13:30 kernel: [    5.421272]      Internal Mic=0x12
11-28 13:30 kernel: [    5.421273] realtek: No valid SSID, checking pincfg 0x41000001 for NID 0x1d
11-28 13:30 kernel: [    5.421273] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0668
11-28 13:30 kernel: [    5.424618] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
11-28 13:30 kernel: [    5.424664] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
11-28 13:30 kernel: [    5.424696] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
11-28 13:30 kernel: [    5.426700] input: HDA Intel PCH Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
11-28 13:30 kernel: [    5.426746] input: HDA Intel PCH Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
11-28 13:30 kernel: [    5.426784] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
11-28 13:30 rsyslogd-2039: Could no open output pipe '/dev/xconsole': No such file or directory [try http://www.rsyslog.com/e/2039 ]
11-28 13:30 kernel: [    6.170500] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
11-28 13:30 kernel: [    6.170504] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
11-28 13:30 kernel: [    6.170593] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
11-28 13:30 kernel: [    6.170596] nouveau  [   VBIOS][0000:01:00.0] version 80.07.9e.00.14
11-28 13:30 kernel: [    6.170910] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
11-28 13:30 kernel: [    6.170911] nouveau  [   VBIOS][0000:01:00.0] running init tables
11-28 13:30 dhclient: <30>Nov 28 13:30:09 dhclient: DHCPDISCOVER on p2p1 to 255.255.255.255 port 67 interval 3 (xid=0x3e75fb58)
11-28 13:30 dhclient: <30>Nov 28 13:30:09 dhclient: DHCPREQUEST of 46.126.174.34 on p2p1 to 255.255.255.255 port 67 (xid=0x3e75fb58)
11-28 13:30 dhclient: <30>Nov 28 13:30:09 dhclient: DHCPOFFER of 46.126.174.34 from 62.2.31.74
11-28 13:30 dhclient: <30>Nov 28 13:30:09 dhclient: DHCPACK of 46.126.174.34 from 62.2.31.74
11-28 13:30 dhclient: <30>Nov 28 13:30:09 dhclient: bound to 46.126.174.34 -- renewal in 1426 seconds.
11-28 13:30 kernel: [    6.363818] init: failsafe main process (754) killed by TERM signal
11-28 13:30 kernel: [    6.486633] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X
11-28 13:30 kernel: [    6.486644] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
11-28 13:30 kernel: [    6.486714] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
11-28 13:30 kernel: [    6.486715] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
11-28 13:30 kernel: [    6.486716] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
11-28 13:30 kernel: [    6.490792] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 600000uv
11-28 13:30 kernel: [    6.515278] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
11-28 13:30 kernel: [    6.515282] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
11-28 13:30 kernel: [    6.515286] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
11-28 13:30 kernel: [    6.515313] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz memory 405 MHz 
11-28 13:30 kernel: [    6.515363] nouveau  [     CLK][0000:01:00.0] 0a: core 405-1058 MHz memory 800 MHz 
11-28 13:30 kernel: [    6.515430] nouveau  [     CLK][0000:01:00.0] 0f: core 405-1058 MHz memory 2500 MHz 
11-28 13:30 kernel: [    6.515567] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 405 MHz 
11-28 13:30 kernel: [    6.547885] vga_switcheroo: enabled
11-28 13:30 kernel: [    6.548065] [TTM] Zone  kernel: Available graphics memory: 4027466 kiB
11-28 13:30 kernel: [    6.548066] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
11-28 13:30 kernel: [    6.548067] [TTM] Initializing pool allocator
11-28 13:30 kernel: [    6.548070] [TTM] Initializing DMA pool allocator
11-28 13:30 kernel: [    6.548086] nouveau  [     DRM] VRAM: 2048 MiB
11-28 13:30 kernel: [    6.548087] nouveau  [     DRM] GART: 1048576 MiB
11-28 13:30 kernel: [    6.548090] nouveau  [     DRM] TMDS table version 2.0
11-28 13:30 kernel: [    6.548091] nouveau  [     DRM] DCB version 4.0
11-28 13:30 kernel: [    6.548092] nouveau  [     DRM] DCB outp 00: 02000fa6 0f420010
11-28 13:30 kernel: [    6.548093] nouveau  [     DRM] DCB outp 01: 02000f62 00020010
11-28 13:30 kernel: [    6.548094] nouveau  [     DRM] DCB conn 00: 00001046
11-28 13:30 kernel: [    6.548096] nouveau W[     DRM] Pointer to flat panel table invalid
11-28 13:30 kernel: [    6.549154] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
11-28 13:30 kernel: [    6.549155] [drm] No driver support for vblank timestamp query.
11-28 13:30 kernel: [    6.549157] nouveau  [     DRM] ACPI backlight interface available, not registering our own
11-28 13:30 kernel: [    6.560566] nouveau  [     DRM] MM: using COPY for buffer copies
11-28 13:30 kernel: [    6.622816] nouveau 0000:01:00.0: No connectors reported connected with modes
11-28 13:30 kernel: [    6.622818] [drm] Cannot find any crtc or sizes - going 1024x768
11-28 13:30 kernel: [    6.623491] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x300000 [ IBUS ]
11-28 13:30 kernel: [    6.623558] nouveau E[   PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
11-28 13:30 kernel: [    8.626019] nouveau E[  PGRAPH][0000:01:00.0] HUB_INIT timed out
11-28 13:30 kernel: [    8.626039] nouveau E[  PGRAPH][0000:01:00.0] 409000 - done 0x00000244
11-28 13:30 kernel: [    8.626065] nouveau E[  PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
11-28 13:30 kernel: [    8.626097] nouveau E[  PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
11-28 13:30 kernel: [    8.626123] nouveau E[  PGRAPH][0000:01:00.0] 502000 - done 0x00000300
11-28 13:30 kernel: [    8.626144] nouveau E[  PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
11-28 13:30 kernel: [    8.626171] nouveau E[  PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
11-28 13:30 kernel: [    8.626195] nouveau E[  PGRAPH][0000:01:00.0] init failed, -16
11-28 13:30 kernel: [    8.627261] nouveau  [     DRM] allocated 1024x768 fb: 0x80000, bo ffff88024f97d400
11-28 13:30 kernel: [    8.627311] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
11-28 13:30 kernel: [    8.627329] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1
11-28 13:30 kernel: [    8.683817] type=1400 audit(1417177811.565:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1011 comm="apparmor_parser"
11-28 13:30 kernel: [    8.683822] type=1400 audit(1417177811.565:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
11-28 13:30 kernel: [    8.683825] type=1400 audit(1417177811.565:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
11-28 13:30 kernel: [    8.684084] type=1400 audit(1417177811.565:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
11-28 13:30 kernel: [    8.684086] type=1400 audit(1417177811.565:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
11-28 13:30 kernel: [    8.684225] type=1400 audit(1417177811.565:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
11-28 13:30 kernel: [    8.684248] type=1400 audit(1417177811.565:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1013 comm="apparmor_parser"
11-28 13:30 cron: <78>Nov 28 13:30:11 cron[1084]: (CRON) INFO (pidfile fd = 3)
11-28 13:30 cron: <78>Nov 28 13:30:11 cron[1120]: (CRON) STARTUP (fork ok)
11-28 13:30 kernel: [    8.795100] init: alsa-restore main process (1104) terminated with status 99
11-28 13:30 cron: <78>Nov 28 13:30:11 cron[1120]: (CRON) INFO (Running @reboot jobs)
11-28 13:30 acpid: <30>Nov 28 13:30:11 acpid: starting up with netlink and the input layer
11-28 13:30 acpid: <30>Nov 28 13:30:11 acpid: 1 rule loaded
11-28 13:30 acpid: <30>Nov 28 13:30:11 acpid: waiting for events: event logging is off
11-28 13:30 kernel: [    9.109572] init: plymouth-upstart-bridge main process ended, respawning
11-28 13:30 acpid: <29>Nov 28 13:30:12 acpid: client connected from 1438[0:0]
11-28 13:30 acpid: <30>Nov 28 13:30:12 acpid: 1 client rule loaded
11-28 13:30 dbus: <29>Nov 28 13:30:12 dbus[778]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
11-28 13:30 polkitd: <30>Nov 28 13:30:12 polkitd[1479]: started daemon version 0.105 using authority implementation `local' version `0.105'
11-28 13:30 dbus: <29>Nov 28 13:30:12 dbus[778]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
11-28 13:30 dbus: <29>Nov 28 13:30:13 dbus[778]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
11-28 13:30 udisksd: <29>Nov 28 13:30:13 udisksd[1541]: udisks daemon version 2.1.3 starting
11-28 13:30 dbus: <29>Nov 28 13:30:13 dbus[778]: [system] Successfully activated service 'org.freedesktop.UDisks2'
11-28 13:30 udisksd: <29>Nov 28 13:30:13 udisksd[1541]: Acquired the name org.freedesktop.UDisks2 on the system message bus
11-28 13:30 dbus: <29>Nov 28 13:30:13 dbus[778]: [system] Activating service name='org.freedesktop.Accounts' (using servicehelper)
11-28 13:30 accounts-daemon: <30>Nov 28 13:30:13 accounts-daemon[1557]: started daemon version 0.6.35
11-28 13:30 dbus: <29>Nov 28 13:30:13 dbus[778]: [system] Successfully activated service 'org.freedesktop.Accounts'
11-28 13:30 ntpdate: <29>Nov 28 13:30:15 ntpdate[908]: adjust time server 91.189.94.4 offset -0.242412 sec
11-28 13:30 kernel: [   14.836732] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 kernel: [   14.837267] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:30 ntpdate: <29>Nov 28 13:30:22 ntpdate[1580]: adjust time server 91.189.94.4 offset -0.243230 sec
11-28 13:30 kernel: [   31.343342] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input15
11-28 13:30 kernel: [   31.343830] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-3:1
11-28 13:30 kernel: [   56.243857] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=212.34.168.137 DST=46.126.174.34 LEN=68 TOS=0x00 PREC=0x00 TTL=116 ID=13083 PROTO=UDP SPT=53 DPT=2336 LEN=48 
11-28 13:32 kernel: [  171.540653] [UFW BLOCK] IN=p2p1 OUT= MAC=34:e6:d7:04:70:73:00:17:10:05:b5:4e:08:00 SRC=212.7.209.11 DST=46.126.174.34 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=62843 PROTO=TCP SPT=30473 DPT=5631 WINDOW=65535 RES=0x00 SYN URGP=0 
11-28 13:33 kernel: [  190.060851] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:33 kernel: [  190.061673] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
11-28 13:34 dbus: <29>Nov 28 13:34:11 dbus[778]: [system] Reloaded configuration
11-28 13:34 upstart-udev-bridge: <26>Nov 28 13:34:11 upstart-udev-bridge[396]: Disconnected from Upstart
11-28 13:34 upstart-socket-bridge: <26>Nov 28 13:34:11 upstart-socket-bridge[671]: Disconnected from Upstart
11-28 13:34 kernel: [  249.138203] init: upstart-udev-bridge main process (396) terminated with status 1
11-28 13:34 kernel: [  249.138210] init: upstart-udev-bridge main process ended, respawning
11-28 13:34 kernel: [  249.138282] init: upstart-socket-bridge main process (671) terminated with status 1
11-28 13:34 kernel: [  249.138287] init: upstart-socket-bridge main process ended, respawning
11-28 13:34 kernel: [  249.138334] init: upstart-file-bridge main process (823) terminated with status 1
11-28 13:34 kernel: [  249.138338] init: upstart-file-bridge main process ended, respawning
11-28 13:35 kernel: [  300.293008] mce: [Hardware Error]: Machine check events logged

X0rg.0.log :

[     9.507] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[     9.507] X Protocol Version 11, Revision 0
[     9.507] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[     9.507] Current Operating System: Linux Cockpit 3.13.0-40-generic #69-Ubuntu SMP Thu Nov 13 17:53:56 UTC 2014 x86_64
[     9.507] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=b34a3bf5-e23c-481a-af72-adb5f2ac8a2c ro
[     9.507] Build Date: 30 July 2014  12:21:54AM
[     9.507] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) 
[     9.507] Current version of pixman: 0.30.2
[     9.507] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     9.507] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.507] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 28 13:30:12 2014
[     9.508] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.509] (==) No Layout section.  Using the first Screen section.
[     9.509] (==) No screen section available. Using defaults.
[     9.509] (**) |-->Screen "Default Screen Section" (0)
[     9.509] (**) |   |-->Monitor "<default monitor>"
[     9.509] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     9.509] (==) Automatically adding devices
[     9.509] (==) Automatically enabling devices
[     9.509] (==) Automatically adding GPU devices
[     9.513] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/cyrillic,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[     9.513] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     9.513] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.513] (II) Loader magic: 0x7f299c0b3d40
[     9.513] (II) Module ABI versions:
[     9.513] 	X.Org ANSI C Emulation: 0.4
[     9.513] 	X.Org Video Driver: 15.0
[     9.513] 	X.Org XInput driver : 20.0
[     9.513] 	X.Org Server Extension : 8.0
[     9.513] (II) xfree86: Adding drm device (/dev/dri/card1)
[     9.513] (II) xfree86: Adding drm device (/dev/dri/card0)
[     9.514] (--) PCI:*(0:0:2:0) 8086:0416:1028:05a9 rev 6, Mem @ 0xd2000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[     9.514] (--) PCI: (0:1:0:0) 10de:0fe4:1028:05a9 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     9.514] Initializing built-in extension Generic Event Extension
[     9.514] Initializing built-in extension SHAPE
[     9.514] Initializing built-in extension MIT-SHM
[     9.514] Initializing built-in extension XInputExtension
[     9.514] Initializing built-in extension XTEST
[     9.514] Initializing built-in extension BIG-REQUESTS
[     9.515] Initializing built-in extension SYNC
[     9.515] Initializing built-in extension XKEYBOARD
[     9.515] Initializing built-in extension XC-MISC
[     9.515] Initializing built-in extension SECURITY
[     9.515] Initializing built-in extension XINERAMA
[     9.515] Initializing built-in extension XFIXES
[     9.515] Initializing built-in extension RENDER
[     9.515] Initializing built-in extension RANDR
[     9.515] Initializing built-in extension COMPOSITE
[     9.515] Initializing built-in extension DAMAGE
[     9.515] Initializing built-in extension MIT-SCREEN-SAVER
[     9.515] Initializing built-in extension DOUBLE-BUFFER
[     9.515] Initializing built-in extension RECORD
[     9.515] Initializing built-in extension DPMS
[     9.515] Initializing built-in extension Present
[     9.515] Initializing built-in extension DRI3
[     9.515] Initializing built-in extension X-Resource
[     9.515] Initializing built-in extension XVideo
[     9.515] Initializing built-in extension XVideo-MotionCompensation
[     9.515] Initializing built-in extension SELinux
[     9.515] Initializing built-in extension XFree86-VidModeExtension
[     9.515] Initializing built-in extension XFree86-DGA
[     9.515] Initializing built-in extension XFree86-DRI
[     9.515] Initializing built-in extension DRI2
[     9.515] (II) LoadModule: "glx"
[     9.516] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     9.521] (II) Module glx: vendor="X.Org Foundation"
[     9.521] 	compiled for 1.15.1, module version = 1.0.0
[     9.521] 	ABI class: X.Org Server Extension, version 8.0
[     9.521] (==) AIGLX enabled
[     9.521] Loading extension GLX
[     9.521] (==) Matched intel as autoconfigured driver 0
[     9.521] (==) Matched nvidia as autoconfigured driver 1
[     9.521] (==) Matched nouveau as autoconfigured driver 2
[     9.521] (==) Matched intel as autoconfigured driver 3
[     9.522] (==) Matched modesetting as autoconfigured driver 4
[     9.522] (==) Matched fbdev as autoconfigured driver 5
[     9.522] (==) Matched vesa as autoconfigured driver 6
[     9.522] (==) Assigned the driver to the xf86ConfigLayout
[     9.522] (II) LoadModule: "intel"
[     9.522] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.524] (II) Module intel: vendor="X.Org Foundation"
[     9.524] 	compiled for 1.15.1, module version = 2.99.910
[     9.524] 	Module class: X.Org Video Driver
[     9.524] 	ABI class: X.Org Video Driver, version 15.0
[     9.524] (II) LoadModule: "nvidia"
[     9.524] (WW) Warning, couldn't open module nvidia
[     9.524] (II) UnloadModule: "nvidia"
[     9.524] (II) Unloading nvidia
[     9.524] (EE) Failed to load module "nvidia" (module does not exist, 0)
[     9.524] (II) LoadModule: "nouveau"
[     9.524] (WW) Warning, couldn't open module nouveau
[     9.524] (II) UnloadModule: "nouveau"
[     9.524] (II) Unloading nouveau
[     9.524] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     9.524] (II) LoadModule: "modesetting"
[     9.524] (WW) Warning, couldn't open module modesetting
[     9.524] (II) UnloadModule: "modesetting"
[     9.524] (II) Unloading modesetting
[     9.524] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     9.524] (II) LoadModule: "fbdev"
[     9.524] (WW) Warning, couldn't open module fbdev
[     9.524] (II) UnloadModule: "fbdev"
[     9.524] (II) Unloading fbdev
[     9.524] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.524] (II) LoadModule: "vesa"
[     9.524] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.525] (II) Module vesa: vendor="X.Org Foundation"
[     9.525] 	compiled for 1.15.0, module version = 2.3.3
[     9.525] 	Module class: X.Org Video Driver
[     9.525] 	ABI class: X.Org Video Driver, version 15.0
[     9.525] (==) Matched intel as autoconfigured driver 0
[     9.525] (==) Matched nvidia as autoconfigured driver 1
[     9.525] (==) Matched nouveau as autoconfigured driver 2
[     9.525] (==) Matched intel as autoconfigured driver 3
[     9.525] (==) Matched modesetting as autoconfigured driver 4
[     9.525] (==) Matched fbdev as autoconfigured driver 5
[     9.525] (==) Matched vesa as autoconfigured driver 6
[     9.525] (==) Assigned the driver to the xf86ConfigLayout
[     9.525] (II) LoadModule: "intel"
[     9.525] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.525] (II) Module intel: vendor="X.Org Foundation"
[     9.525] 	compiled for 1.15.1, module version = 2.99.910
[     9.525] 	Module class: X.Org Video Driver
[     9.525] 	ABI class: X.Org Video Driver, version 15.0
[     9.525] (II) UnloadModule: "intel"
[     9.525] (II) Unloading intel
[     9.525] (II) Failed to load module "intel" (already loaded, 32553)
[     9.525] (II) LoadModule: "nvidia"
[     9.525] (WW) Warning, couldn't open module nvidia
[     9.525] (II) UnloadModule: "nvidia"
[     9.525] (II) Unloading nvidia
[     9.525] (EE) Failed to load module "nvidia" (module does not exist, 0)
[     9.525] (II) LoadModule: "nouveau"
[     9.525] (WW) Warning, couldn't open module nouveau
[     9.525] (II) UnloadModule: "nouveau"
[     9.525] (II) Unloading nouveau
[     9.525] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     9.525] (II) LoadModule: "modesetting"
[     9.525] (WW) Warning, couldn't open module modesetting
[     9.525] (II) UnloadModule: "modesetting"
[     9.525] (II) Unloading modesetting
[     9.525] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     9.525] (II) LoadModule: "fbdev"
[     9.525] (WW) Warning, couldn't open module fbdev
[     9.525] (II) UnloadModule: "fbdev"
[     9.525] (II) Unloading fbdev
[     9.525] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.525] (II) LoadModule: "vesa"
[     9.526] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.526] (II) Module vesa: vendor="X.Org Foundation"
[     9.526] 	compiled for 1.15.0, module version = 2.3.3
[     9.526] 	Module class: X.Org Video Driver
[     9.526] 	ABI class: X.Org Video Driver, version 15.0
[     9.526] (II) UnloadModule: "vesa"
[     9.526] (II) Unloading vesa
[     9.526] (II) Failed to load module "vesa" (already loaded, 0)
[     9.526] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     9.526] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     9.526] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     9.526] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     9.526] (II) VESA: driver for VESA chipsets: vesa
[     9.526] (++) using VT number 1

[     9.527] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.3 (Timo Aaltonen <tjaalton@debian.org>)
[     9.527] (WW) Falling back to old probe method for vesa
[     9.528] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[     9.528] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[     9.528] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     9.528] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     9.528] (==) intel(0): RGB weight 888
[     9.528] (==) intel(0): Default visual is TrueColor
[     9.528] (**) intel(0): Framebuffer tiled
[     9.528] (**) intel(0): Pixmaps tiled
[     9.528] (**) intel(0): "Tear free" disabled
[     9.528] (**) intel(0): Forcing per-crtc-pixmaps? no
[     9.528] (II) intel(0): Output eDP1 has no monitor section
[     9.528] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[     9.528] (II) intel(0): Output VGA1 has no monitor section
[     9.528] (II) intel(0): Output HDMI1 has no monitor section
[     9.528] (II) intel(0): Output VIRTUAL1 has no monitor section
[     9.528] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     9.528] (==) intel(0): DPI set to (96, 96)
[     9.528] (II) Loading sub module "dri2"
[     9.528] (II) LoadModule: "dri2"
[     9.528] (II) Module "dri2" already built-in
[     9.528] (II) UnloadModule: "vesa"
[     9.528] (II) Unloading vesa
[     9.528] (==) Depth 24 pixmap format is 32 bpp
[     9.530] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     9.530] (==) intel(0): Backing store enabled
[     9.530] (==) intel(0): Silken mouse enabled
[     9.531] (II) intel(0): HW Cursor enabled
[     9.531] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     9.531] (==) intel(0): DPMS enabled
[     9.531] (II) intel(0): [DRI2] Setup complete
[     9.531] (II) intel(0): [DRI2]   DRI driver: i965
[     9.531] (II) intel(0): [DRI2]   VDPAU driver: i965
[     9.531] (II) intel(0): direct rendering: DRI2 Enabled
[     9.531] (==) intel(0): hotplug detection: "enabled"
[     9.531] (--) RandR disabled
[     9.536] (II) SELinux: Disabled on system
[     9.546] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     9.546] (II) AIGLX: enabled GLX_ARB_create_context
[     9.547] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     9.547] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     9.547] (II) AIGLX: enabled GLX_INTEL_swap_event
[     9.547] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     9.547] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     9.547] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     9.547] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     9.547] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     9.547] (II) AIGLX: Loaded and initialized i965
[     9.547] (II) GLX: Initialized DRI2 GL provider for screen 0
[     9.549] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     9.568] (II) intel(0): Setting screen physical size to 508 x 285
[     9.581] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     9.599] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     9.599] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.599] (II) LoadModule: "evdev"
[     9.599] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.600] (II) Module evdev: vendor="X.Org Foundation"
[     9.600] 	compiled for 1.15.0, module version = 2.8.2
[     9.600] 	Module class: X.Org XInput Driver
[     9.600] 	ABI class: X.Org XInput driver, version 20.0
[     9.600] (II) Using input driver 'evdev' for 'Power Button'
[     9.600] (**) Power Button: always reports core events
[     9.600] (**) evdev: Power Button: Device: "/dev/input/event2"
[     9.600] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.600] (--) evdev: Power Button: Found keys
[     9.600] (II) evdev: Power Button: Configuring as keyboard
[     9.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     9.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.600] (**) Option "xkb_rules" "evdev"
[     9.600] (**) Option "xkb_model" "pc105"
[     9.600] (**) Option "xkb_layout" "ch"
[     9.600] (**) Option "xkb_variant" "fr"
[     9.602] (II) XKB: generating xkmfile /tmp/server-53A4CFD27CBE694B87E57086754C176B71A8EEB5.xkm
[     9.610] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     9.610] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.610] (II) Using input driver 'evdev' for 'Video Bus'
[     9.610] (**) Video Bus: always reports core events
[     9.610] (**) evdev: Video Bus: Device: "/dev/input/event7"
[     9.610] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     9.610] (--) evdev: Video Bus: Found keys
[     9.610] (II) evdev: Video Bus: Configuring as keyboard
[     9.610] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event7"
[     9.610] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     9.610] (**) Option "xkb_rules" "evdev"
[     9.610] (**) Option "xkb_model" "pc105"
[     9.610] (**) Option "xkb_layout" "ch"
[     9.610] (**) Option "xkb_variant" "fr"
[     9.610] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     9.610] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.610] (II) Using input driver 'evdev' for 'Power Button'
[     9.610] (**) Power Button: always reports core events
[     9.610] (**) evdev: Power Button: Device: "/dev/input/event0"
[     9.610] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.610] (--) evdev: Power Button: Found keys
[     9.610] (II) evdev: Power Button: Configuring as keyboard
[     9.610] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[     9.610] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     9.610] (**) Option "xkb_rules" "evdev"
[     9.610] (**) Option "xkb_model" "pc105"
[     9.610] (**) Option "xkb_layout" "ch"
[     9.610] (**) Option "xkb_variant" "fr"
[     9.611] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[     9.611] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.611] (II) Using input driver 'evdev' for 'Video Bus'
[     9.611] (**) Video Bus: always reports core events
[     9.611] (**) evdev: Video Bus: Device: "/dev/input/event6"
[     9.611] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     9.611] (--) evdev: Video Bus: Found keys
[     9.611] (II) evdev: Video Bus: Configuring as keyboard
[     9.611] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3d/LNXVIDEO:00/input/input7/event6"
[     9.611] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[     9.611] (**) Option "xkb_rules" "evdev"
[     9.611] (**) Option "xkb_model" "pc105"
[     9.611] (**) Option "xkb_layout" "ch"
[     9.611] (**) Option "xkb_variant" "fr"
[     9.611] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding drm device (/dev/dri/card1) card1 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[     9.611] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[     9.611] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     9.611] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[     9.611] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event8)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel PCH Headphone Front (/dev/input/event12)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.612] (II) config/udev: Adding input device HDA Intel PCH Headphone Surround (/dev/input/event11)
[     9.612] (II) No input driver specified, ignoring this device.
[     9.612] (II) This device may have been added with another device file.
[     9.612] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     9.612] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.612] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     9.612] (**) AT Translated Set 2 keyboard: always reports core events
[     9.612] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[     9.612] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     9.612] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     9.612] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     9.612] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     9.612] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     9.612] (**) Option "xkb_rules" "evdev"
[     9.612] (**) Option "xkb_model" "pc105"
[     9.612] (**) Option "xkb_layout" "ch"
[     9.612] (**) Option "xkb_variant" "fr"
[     9.612] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[     9.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     9.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     9.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     9.612] (II) LoadModule: "synaptics"
[     9.612] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     9.613] (II) Module synaptics: vendor="X.Org Foundation"
[     9.613] 	compiled for 1.15.0, module version = 1.7.4
[     9.613] 	Module class: X.Org XInput Driver
[     9.613] 	ABI class: X.Org XInput driver, version 20.0
[     9.613] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     9.613] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.613] (**) Option "Device" "/dev/input/event4"
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5668 (res 43)
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4756 (res 68)
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.648] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[     9.660] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[     9.660] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     9.660] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     9.660] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     9.660] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.660] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     9.660] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     9.661] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[     9.661] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     9.661] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[     9.661] (**) Dell WMI hotkeys: always reports core events
[     9.661] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[     9.661] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[     9.661] (--) evdev: Dell WMI hotkeys: Found keys
[     9.661] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[     9.661] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event5"
[     9.661] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[     9.661] (**) Option "xkb_rules" "evdev"
[     9.661] (**) Option "xkb_model" "pc105"
[     9.661] (**) Option "xkb_layout" "ch"
[     9.661] (**) Option "xkb_variant" "fr"
[     9.909] (II) intel(0): EDID vendor "AUO", prod id 4413
[     9.909] (II) intel(0): Printing DDC gathered Modelines:
[     9.909] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    31.298] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse1)
[    31.298] (II) No input driver specified, ignoring this device.
[    31.298] (II) This device may have been added with another device file.
[    31.300] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event14)
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[    31.300] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[    31.300] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event14"
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[    31.300] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[    31.300] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[    31.300] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[    31.300] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input15/event14"
[    31.300] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 13)
[    31.300] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4

À part ça, la machine est calme (pas de ventilo mode hélico, il n'est pas audible) et températures : MB 56°, CPU 54°, DD 35°. Si quelqu'un pouvait me dire si les températures sont normales pour un portable, histoire de comparer, ce serait sympa (c'est mon 1er portable).

Merci.

Dernière modification par fcn50 (Le 28/11/2014, à 14:52)

ArchangeGabriel · Le 28/11/2014, à 15:30

Ok, je n’ai malheureusement pas le temps de regarder tout ça dans le détail aujourd’hui (planning très chargé avec diverses réunions jusque tard dans la nuit), donc il va te falloir attendre demain. En attendant ton ordinateur est utilisable en l’état donc c’est pas trop dramatique, par contre est-ce que tu peux me copier quelque part le /var/log/Xorg.0.log.old si tu n’as pas redémarré de nouveau depuis le reboot ayant suivi la purge ?

Et sinon, est-ce que tu peux me donner le modèle exact de ton portable ?

Merci et à demain.

F50 · Le 28/11/2014, à 19:43

Pas de souci, c'est déjà sympa de me donner ton aide. En effet, rien de dramatique, la machine tourne parfaitement avec l'Intel donc, c'est pas la guerre. Pour /Xorg.0.log.old, malheureusement, j'ai vu ton message trop tard, en plus je fais du Bleachbit après chaque session.

Pour la machine, c'est une Alienware 14, je te poste lshw dès qu'elle est à nouveau en branle.

Merci et bon boulot.

F50 · Le 29/11/2014, à 07:21

Je viens de voir qu'il y a bien un Xorg.0.log.old, le voici :

[     9.507] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[     9.507] X Protocol Version 11, Revision 0
[     9.507] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[     9.507] Current Operating System: Linux Cockpit 3.13.0-40-generic #69-Ubuntu SMP Thu Nov 13 17:53:56 UTC 2014 x86_64
[     9.507] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=b34a3bf5-e23c-481a-af72-adb5f2ac8a2c ro
[     9.507] Build Date: 30 July 2014  12:21:54AM
[     9.507] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) 
[     9.507] Current version of pixman: 0.30.2
[     9.507] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     9.507] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.507] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 28 13:30:12 2014
[     9.508] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.509] (==) No Layout section.  Using the first Screen section.
[     9.509] (==) No screen section available. Using defaults.
[     9.509] (**) |-->Screen "Default Screen Section" (0)
[     9.509] (**) |   |-->Monitor "<default monitor>"
[     9.509] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     9.509] (==) Automatically adding devices
[     9.509] (==) Automatically enabling devices
[     9.509] (==) Automatically adding GPU devices
[     9.513] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/cyrillic,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[     9.513] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     9.513] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.513] (II) Loader magic: 0x7f299c0b3d40
[     9.513] (II) Module ABI versions:
[     9.513] 	X.Org ANSI C Emulation: 0.4
[     9.513] 	X.Org Video Driver: 15.0
[     9.513] 	X.Org XInput driver : 20.0
[     9.513] 	X.Org Server Extension : 8.0
[     9.513] (II) xfree86: Adding drm device (/dev/dri/card1)
[     9.513] (II) xfree86: Adding drm device (/dev/dri/card0)
[     9.514] (--) PCI:*(0:0:2:0) 8086:0416:1028:05a9 rev 6, Mem @ 0xd2000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[     9.514] (--) PCI: (0:1:0:0) 10de:0fe4:1028:05a9 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     9.514] Initializing built-in extension Generic Event Extension
[     9.514] Initializing built-in extension SHAPE
[     9.514] Initializing built-in extension MIT-SHM
[     9.514] Initializing built-in extension XInputExtension
[     9.514] Initializing built-in extension XTEST
[     9.514] Initializing built-in extension BIG-REQUESTS
[     9.515] Initializing built-in extension SYNC
[     9.515] Initializing built-in extension XKEYBOARD
[     9.515] Initializing built-in extension XC-MISC
[     9.515] Initializing built-in extension SECURITY
[     9.515] Initializing built-in extension XINERAMA
[     9.515] Initializing built-in extension XFIXES
[     9.515] Initializing built-in extension RENDER
[     9.515] Initializing built-in extension RANDR
[     9.515] Initializing built-in extension COMPOSITE
[     9.515] Initializing built-in extension DAMAGE
[     9.515] Initializing built-in extension MIT-SCREEN-SAVER
[     9.515] Initializing built-in extension DOUBLE-BUFFER
[     9.515] Initializing built-in extension RECORD
[     9.515] Initializing built-in extension DPMS
[     9.515] Initializing built-in extension Present
[     9.515] Initializing built-in extension DRI3
[     9.515] Initializing built-in extension X-Resource
[     9.515] Initializing built-in extension XVideo
[     9.515] Initializing built-in extension XVideo-MotionCompensation
[     9.515] Initializing built-in extension SELinux
[     9.515] Initializing built-in extension XFree86-VidModeExtension
[     9.515] Initializing built-in extension XFree86-DGA
[     9.515] Initializing built-in extension XFree86-DRI
[     9.515] Initializing built-in extension DRI2
[     9.515] (II) LoadModule: "glx"
[     9.516] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     9.521] (II) Module glx: vendor="X.Org Foundation"
[     9.521] 	compiled for 1.15.1, module version = 1.0.0
[     9.521] 	ABI class: X.Org Server Extension, version 8.0
[     9.521] (==) AIGLX enabled
[     9.521] Loading extension GLX
[     9.521] (==) Matched intel as autoconfigured driver 0
[     9.521] (==) Matched nvidia as autoconfigured driver 1
[     9.521] (==) Matched nouveau as autoconfigured driver 2
[     9.521] (==) Matched intel as autoconfigured driver 3
[     9.522] (==) Matched modesetting as autoconfigured driver 4
[     9.522] (==) Matched fbdev as autoconfigured driver 5
[     9.522] (==) Matched vesa as autoconfigured driver 6
[     9.522] (==) Assigned the driver to the xf86ConfigLayout
[     9.522] (II) LoadModule: "intel"
[     9.522] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.524] (II) Module intel: vendor="X.Org Foundation"
[     9.524] 	compiled for 1.15.1, module version = 2.99.910
[     9.524] 	Module class: X.Org Video Driver
[     9.524] 	ABI class: X.Org Video Driver, version 15.0
[     9.524] (II) LoadModule: "nvidia"
[     9.524] (WW) Warning, couldn't open module nvidia
[     9.524] (II) UnloadModule: "nvidia"
[     9.524] (II) Unloading nvidia
[     9.524] (EE) Failed to load module "nvidia" (module does not exist, 0)
[     9.524] (II) LoadModule: "nouveau"
[     9.524] (WW) Warning, couldn't open module nouveau
[     9.524] (II) UnloadModule: "nouveau"
[     9.524] (II) Unloading nouveau
[     9.524] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     9.524] (II) LoadModule: "modesetting"
[     9.524] (WW) Warning, couldn't open module modesetting
[     9.524] (II) UnloadModule: "modesetting"
[     9.524] (II) Unloading modesetting
[     9.524] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     9.524] (II) LoadModule: "fbdev"
[     9.524] (WW) Warning, couldn't open module fbdev
[     9.524] (II) UnloadModule: "fbdev"
[     9.524] (II) Unloading fbdev
[     9.524] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.524] (II) LoadModule: "vesa"
[     9.524] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.525] (II) Module vesa: vendor="X.Org Foundation"
[     9.525] 	compiled for 1.15.0, module version = 2.3.3
[     9.525] 	Module class: X.Org Video Driver
[     9.525] 	ABI class: X.Org Video Driver, version 15.0
[     9.525] (==) Matched intel as autoconfigured driver 0
[     9.525] (==) Matched nvidia as autoconfigured driver 1
[     9.525] (==) Matched nouveau as autoconfigured driver 2
[     9.525] (==) Matched intel as autoconfigured driver 3
[     9.525] (==) Matched modesetting as autoconfigured driver 4
[     9.525] (==) Matched fbdev as autoconfigured driver 5
[     9.525] (==) Matched vesa as autoconfigured driver 6
[     9.525] (==) Assigned the driver to the xf86ConfigLayout
[     9.525] (II) LoadModule: "intel"
[     9.525] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.525] (II) Module intel: vendor="X.Org Foundation"
[     9.525] 	compiled for 1.15.1, module version = 2.99.910
[     9.525] 	Module class: X.Org Video Driver
[     9.525] 	ABI class: X.Org Video Driver, version 15.0
[     9.525] (II) UnloadModule: "intel"
[     9.525] (II) Unloading intel
[     9.525] (II) Failed to load module "intel" (already loaded, 32553)
[     9.525] (II) LoadModule: "nvidia"
[     9.525] (WW) Warning, couldn't open module nvidia
[     9.525] (II) UnloadModule: "nvidia"
[     9.525] (II) Unloading nvidia
[     9.525] (EE) Failed to load module "nvidia" (module does not exist, 0)
[     9.525] (II) LoadModule: "nouveau"
[     9.525] (WW) Warning, couldn't open module nouveau
[     9.525] (II) UnloadModule: "nouveau"
[     9.525] (II) Unloading nouveau
[     9.525] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     9.525] (II) LoadModule: "modesetting"
[     9.525] (WW) Warning, couldn't open module modesetting
[     9.525] (II) UnloadModule: "modesetting"
[     9.525] (II) Unloading modesetting
[     9.525] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     9.525] (II) LoadModule: "fbdev"
[     9.525] (WW) Warning, couldn't open module fbdev
[     9.525] (II) UnloadModule: "fbdev"
[     9.525] (II) Unloading fbdev
[     9.525] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.525] (II) LoadModule: "vesa"
[     9.526] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.526] (II) Module vesa: vendor="X.Org Foundation"
[     9.526] 	compiled for 1.15.0, module version = 2.3.3
[     9.526] 	Module class: X.Org Video Driver
[     9.526] 	ABI class: X.Org Video Driver, version 15.0
[     9.526] (II) UnloadModule: "vesa"
[     9.526] (II) Unloading vesa
[     9.526] (II) Failed to load module "vesa" (already loaded, 0)
[     9.526] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     9.526] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     9.526] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     9.526] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     9.526] (II) VESA: driver for VESA chipsets: vesa
[     9.526] (++) using VT number 1

[     9.527] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.3 (Timo Aaltonen <tjaalton@debian.org>)
[     9.527] (WW) Falling back to old probe method for vesa
[     9.528] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[     9.528] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[     9.528] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     9.528] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     9.528] (==) intel(0): RGB weight 888
[     9.528] (==) intel(0): Default visual is TrueColor
[     9.528] (**) intel(0): Framebuffer tiled
[     9.528] (**) intel(0): Pixmaps tiled
[     9.528] (**) intel(0): "Tear free" disabled
[     9.528] (**) intel(0): Forcing per-crtc-pixmaps? no
[     9.528] (II) intel(0): Output eDP1 has no monitor section
[     9.528] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[     9.528] (II) intel(0): Output VGA1 has no monitor section
[     9.528] (II) intel(0): Output HDMI1 has no monitor section
[     9.528] (II) intel(0): Output VIRTUAL1 has no monitor section
[     9.528] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     9.528] (==) intel(0): DPI set to (96, 96)
[     9.528] (II) Loading sub module "dri2"
[     9.528] (II) LoadModule: "dri2"
[     9.528] (II) Module "dri2" already built-in
[     9.528] (II) UnloadModule: "vesa"
[     9.528] (II) Unloading vesa
[     9.528] (==) Depth 24 pixmap format is 32 bpp
[     9.530] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     9.530] (==) intel(0): Backing store enabled
[     9.530] (==) intel(0): Silken mouse enabled
[     9.531] (II) intel(0): HW Cursor enabled
[     9.531] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     9.531] (==) intel(0): DPMS enabled
[     9.531] (II) intel(0): [DRI2] Setup complete
[     9.531] (II) intel(0): [DRI2]   DRI driver: i965
[     9.531] (II) intel(0): [DRI2]   VDPAU driver: i965
[     9.531] (II) intel(0): direct rendering: DRI2 Enabled
[     9.531] (==) intel(0): hotplug detection: "enabled"
[     9.531] (--) RandR disabled
[     9.536] (II) SELinux: Disabled on system
[     9.546] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     9.546] (II) AIGLX: enabled GLX_ARB_create_context
[     9.547] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     9.547] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     9.547] (II) AIGLX: enabled GLX_INTEL_swap_event
[     9.547] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     9.547] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     9.547] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     9.547] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     9.547] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     9.547] (II) AIGLX: Loaded and initialized i965
[     9.547] (II) GLX: Initialized DRI2 GL provider for screen 0
[     9.549] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     9.568] (II) intel(0): Setting screen physical size to 508 x 285
[     9.581] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     9.599] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     9.599] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.599] (II) LoadModule: "evdev"
[     9.599] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.600] (II) Module evdev: vendor="X.Org Foundation"
[     9.600] 	compiled for 1.15.0, module version = 2.8.2
[     9.600] 	Module class: X.Org XInput Driver
[     9.600] 	ABI class: X.Org XInput driver, version 20.0
[     9.600] (II) Using input driver 'evdev' for 'Power Button'
[     9.600] (**) Power Button: always reports core events
[     9.600] (**) evdev: Power Button: Device: "/dev/input/event2"
[     9.600] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.600] (--) evdev: Power Button: Found keys
[     9.600] (II) evdev: Power Button: Configuring as keyboard
[     9.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     9.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.600] (**) Option "xkb_rules" "evdev"
[     9.600] (**) Option "xkb_model" "pc105"
[     9.600] (**) Option "xkb_layout" "ch"
[     9.600] (**) Option "xkb_variant" "fr"
[     9.602] (II) XKB: generating xkmfile /tmp/server-53A4CFD27CBE694B87E57086754C176B71A8EEB5.xkm
[     9.610] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     9.610] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.610] (II) Using input driver 'evdev' for 'Video Bus'
[     9.610] (**) Video Bus: always reports core events
[     9.610] (**) evdev: Video Bus: Device: "/dev/input/event7"
[     9.610] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     9.610] (--) evdev: Video Bus: Found keys
[     9.610] (II) evdev: Video Bus: Configuring as keyboard
[     9.610] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event7"
[     9.610] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     9.610] (**) Option "xkb_rules" "evdev"
[     9.610] (**) Option "xkb_model" "pc105"
[     9.610] (**) Option "xkb_layout" "ch"
[     9.610] (**) Option "xkb_variant" "fr"
[     9.610] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     9.610] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.610] (II) Using input driver 'evdev' for 'Power Button'
[     9.610] (**) Power Button: always reports core events
[     9.610] (**) evdev: Power Button: Device: "/dev/input/event0"
[     9.610] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.610] (--) evdev: Power Button: Found keys
[     9.610] (II) evdev: Power Button: Configuring as keyboard
[     9.610] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[     9.610] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     9.610] (**) Option "xkb_rules" "evdev"
[     9.610] (**) Option "xkb_model" "pc105"
[     9.610] (**) Option "xkb_layout" "ch"
[     9.610] (**) Option "xkb_variant" "fr"
[     9.611] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[     9.611] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.611] (II) Using input driver 'evdev' for 'Video Bus'
[     9.611] (**) Video Bus: always reports core events
[     9.611] (**) evdev: Video Bus: Device: "/dev/input/event6"
[     9.611] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     9.611] (--) evdev: Video Bus: Found keys
[     9.611] (II) evdev: Video Bus: Configuring as keyboard
[     9.611] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3d/LNXVIDEO:00/input/input7/event6"
[     9.611] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[     9.611] (**) Option "xkb_rules" "evdev"
[     9.611] (**) Option "xkb_model" "pc105"
[     9.611] (**) Option "xkb_layout" "ch"
[     9.611] (**) Option "xkb_variant" "fr"
[     9.611] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding drm device (/dev/dri/card1) card1 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[     9.611] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[     9.611] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     9.611] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[     9.611] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event8)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.611] (II) config/udev: Adding input device HDA Intel PCH Headphone Front (/dev/input/event12)
[     9.611] (II) No input driver specified, ignoring this device.
[     9.611] (II) This device may have been added with another device file.
[     9.612] (II) config/udev: Adding input device HDA Intel PCH Headphone Surround (/dev/input/event11)
[     9.612] (II) No input driver specified, ignoring this device.
[     9.612] (II) This device may have been added with another device file.
[     9.612] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     9.612] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.612] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     9.612] (**) AT Translated Set 2 keyboard: always reports core events
[     9.612] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[     9.612] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     9.612] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     9.612] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     9.612] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     9.612] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     9.612] (**) Option "xkb_rules" "evdev"
[     9.612] (**) Option "xkb_model" "pc105"
[     9.612] (**) Option "xkb_layout" "ch"
[     9.612] (**) Option "xkb_variant" "fr"
[     9.612] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[     9.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     9.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     9.612] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     9.612] (II) LoadModule: "synaptics"
[     9.612] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     9.613] (II) Module synaptics: vendor="X.Org Foundation"
[     9.613] 	compiled for 1.15.0, module version = 1.7.4
[     9.613] 	Module class: X.Org XInput Driver
[     9.613] 	ABI class: X.Org XInput driver, version 20.0
[     9.613] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     9.613] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.613] (**) Option "Device" "/dev/input/event4"
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5668 (res 43)
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4756 (res 68)
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     9.648] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.648] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[     9.660] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[     9.660] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     9.660] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     9.660] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     9.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     9.660] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.660] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     9.660] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     9.661] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[     9.661] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     9.661] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[     9.661] (**) Dell WMI hotkeys: always reports core events
[     9.661] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[     9.661] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[     9.661] (--) evdev: Dell WMI hotkeys: Found keys
[     9.661] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[     9.661] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event5"
[     9.661] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[     9.661] (**) Option "xkb_rules" "evdev"
[     9.661] (**) Option "xkb_model" "pc105"
[     9.661] (**) Option "xkb_layout" "ch"
[     9.661] (**) Option "xkb_variant" "fr"
[     9.909] (II) intel(0): EDID vendor "AUO", prod id 4413
[     9.909] (II) intel(0): Printing DDC gathered Modelines:
[     9.909] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    31.298] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse1)
[    31.298] (II) No input driver specified, ignoring this device.
[    31.298] (II) This device may have been added with another device file.
[    31.300] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event14)
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[    31.300] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[    31.300] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event14"
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[    31.300] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[    31.300] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[    31.300] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[    31.300] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[    31.300] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input15/event14"
[    31.300] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 13)
[    31.300] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[    31.300] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[  3051.102] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[  7666.206] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Close
[  7666.206] (II) UnloadModule: "evdev"
[  7666.206] (II) evdev: Dell WMI hotkeys: Close
[  7666.206] (II) UnloadModule: "evdev"
[  7666.206] (II) UnloadModule: "synaptics"
[  7666.206] (II) evdev: AT Translated Set 2 keyboard: Close
[  7666.206] (II) UnloadModule: "evdev"
[  7666.206] (II) evdev: Video Bus: Close
[  7666.206] (II) UnloadModule: "evdev"
[  7666.206] (II) evdev: Power Button: Close
[  7666.206] (II) UnloadModule: "evdev"
[  7666.206] (II) evdev: Video Bus: Close
[  7666.206] (II) UnloadModule: "evdev"
[  7666.206] (II) evdev: Power Button: Close
[  7666.206] (II) UnloadModule: "evdev"
[  7666.827] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[  7666.827] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  7666.827] (EE) 
Fatal server error:
[  7666.827] (EE) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[  7666.827] (EE) 
[  7666.827] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  7666.827] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  7666.827] (EE) 
[  7666.827] (EE) 
[  7666.827] (EE) Backtrace:
[  7666.829] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x7f299be2fd28]
[  7666.829] (EE) 1: /usr/bin/X (0x7f299bc87000+0x1aca19) [0x7f299be33a19]
[  7666.829] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f299ad84000+0x10340) [0x7f299ad94340]
[  7666.829] (EE) 3: /usr/bin/X (0x7f299bc87000+0x1b2d55) [0x7f299be39d55]
[  7666.829] (EE) 4: /usr/bin/X (CloseWellKnownConnections+0x2f) [0x7f299be308df]
[  7666.829] (EE) 5: /usr/bin/X (0x7f299bc87000+0x1b42e9) [0x7f299be3b2e9]
[  7666.829] (EE) 6: /usr/bin/X (0x7f299bc87000+0x1b5008) [0x7f299be3c008]
[  7666.830] (EE) 7: /usr/bin/X (0x7f299bc87000+0xb8ec9) [0x7f299bd3fec9]
[  7666.830] (EE) 8: /usr/bin/X (xf86CloseConsole+0x143) [0x7f299bd407a3]
[  7666.830] (EE) 9: /usr/bin/X (ddxGiveUp+0x6d) [0x7f299bd1c62d]
[  7666.830] (EE) 10: /usr/bin/X (0x7f299bc87000+0x59b54) [0x7f299bce0b54]
[  7666.830] (EE) 11: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0x7f29997c3ec5]
[  7666.830] (EE) 12: /usr/bin/X (0x7f299bc87000+0x44dde) [0x7f299bccbdde]
[  7666.830] (EE) 
[  7666.830] (EE) Segmentation fault at address 0x98
[  7666.830] (EE) 
FatalError re-entered, aborting
[  7666.830] (EE) Caught signal 11 (Segmentation fault). Server aborting
[  7666.830] (EE)

Le dernier Xorg.0.log :

[     9.546] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[     9.546] X Protocol Version 11, Revision 0
[     9.546] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[     9.546] Current Operating System: Linux Cockpit 3.13.0-40-generic #69-Ubuntu SMP Thu Nov 13 17:53:56 UTC 2014 x86_64
[     9.546] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=b34a3bf5-e23c-481a-af72-adb5f2ac8a2c ro
[     9.546] Build Date: 30 July 2014  12:21:54AM
[     9.546] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) 
[     9.546] Current version of pixman: 0.30.2
[     9.546] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     9.546] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.546] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 29 05:26:55 2014
[     9.547] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.549] (==) No Layout section.  Using the first Screen section.
[     9.549] (==) No screen section available. Using defaults.
[     9.549] (**) |-->Screen "Default Screen Section" (0)
[     9.549] (**) |   |-->Monitor "<default monitor>"
[     9.549] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     9.549] (==) Automatically adding devices
[     9.549] (==) Automatically enabling devices
[     9.549] (==) Automatically adding GPU devices
[     9.552] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/cyrillic,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[     9.552] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     9.552] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.552] (II) Loader magic: 0x7f10abfe6d40
[     9.552] (II) Module ABI versions:
[     9.552] 	X.Org ANSI C Emulation: 0.4
[     9.552] 	X.Org Video Driver: 15.0
[     9.552] 	X.Org XInput driver : 20.0
[     9.552] 	X.Org Server Extension : 8.0
[     9.552] (II) xfree86: Adding drm device (/dev/dri/card1)
[     9.552] (II) xfree86: Adding drm device (/dev/dri/card0)
[     9.553] (--) PCI:*(0:0:2:0) 8086:0416:1028:05a9 rev 6, Mem @ 0xd2000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[     9.553] (--) PCI: (0:1:0:0) 10de:0fe4:1028:05a9 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     9.554] Initializing built-in extension Generic Event Extension
[     9.554] Initializing built-in extension SHAPE
[     9.554] Initializing built-in extension MIT-SHM
[     9.554] Initializing built-in extension XInputExtension
[     9.554] Initializing built-in extension XTEST
[     9.554] Initializing built-in extension BIG-REQUESTS
[     9.554] Initializing built-in extension SYNC
[     9.554] Initializing built-in extension XKEYBOARD
[     9.554] Initializing built-in extension XC-MISC
[     9.554] Initializing built-in extension SECURITY
[     9.554] Initializing built-in extension XINERAMA
[     9.554] Initializing built-in extension XFIXES
[     9.554] Initializing built-in extension RENDER
[     9.554] Initializing built-in extension RANDR
[     9.554] Initializing built-in extension COMPOSITE
[     9.554] Initializing built-in extension DAMAGE
[     9.554] Initializing built-in extension MIT-SCREEN-SAVER
[     9.554] Initializing built-in extension DOUBLE-BUFFER
[     9.554] Initializing built-in extension RECORD
[     9.554] Initializing built-in extension DPMS
[     9.554] Initializing built-in extension Present
[     9.554] Initializing built-in extension DRI3
[     9.554] Initializing built-in extension X-Resource
[     9.554] Initializing built-in extension XVideo
[     9.554] Initializing built-in extension XVideo-MotionCompensation
[     9.554] Initializing built-in extension SELinux
[     9.554] Initializing built-in extension XFree86-VidModeExtension
[     9.554] Initializing built-in extension XFree86-DGA
[     9.554] Initializing built-in extension XFree86-DRI
[     9.554] Initializing built-in extension DRI2
[     9.554] (II) LoadModule: "glx"
[     9.556] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     9.561] (II) Module glx: vendor="X.Org Foundation"
[     9.561] 	compiled for 1.15.1, module version = 1.0.0
[     9.561] 	ABI class: X.Org Server Extension, version 8.0
[     9.561] (==) AIGLX enabled
[     9.561] Loading extension GLX
[     9.561] (==) Matched intel as autoconfigured driver 0
[     9.561] (==) Matched nvidia as autoconfigured driver 1
[     9.561] (==) Matched nouveau as autoconfigured driver 2
[     9.561] (==) Matched intel as autoconfigured driver 3
[     9.561] (==) Matched modesetting as autoconfigured driver 4
[     9.561] (==) Matched fbdev as autoconfigured driver 5
[     9.561] (==) Matched vesa as autoconfigured driver 6
[     9.561] (==) Assigned the driver to the xf86ConfigLayout
[     9.561] (II) LoadModule: "intel"
[     9.561] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.563] (II) Module intel: vendor="X.Org Foundation"
[     9.563] 	compiled for 1.15.1, module version = 2.99.910
[     9.563] 	Module class: X.Org Video Driver
[     9.563] 	ABI class: X.Org Video Driver, version 15.0
[     9.563] (II) LoadModule: "nvidia"
[     9.563] (WW) Warning, couldn't open module nvidia
[     9.563] (II) UnloadModule: "nvidia"
[     9.563] (II) Unloading nvidia
[     9.563] (EE) Failed to load module "nvidia" (module does not exist, 0)
[     9.563] (II) LoadModule: "nouveau"
[     9.563] (WW) Warning, couldn't open module nouveau
[     9.563] (II) UnloadModule: "nouveau"
[     9.563] (II) Unloading nouveau
[     9.563] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     9.563] (II) LoadModule: "modesetting"
[     9.563] (WW) Warning, couldn't open module modesetting
[     9.563] (II) UnloadModule: "modesetting"
[     9.563] (II) Unloading modesetting
[     9.563] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     9.563] (II) LoadModule: "fbdev"
[     9.564] (WW) Warning, couldn't open module fbdev
[     9.564] (II) UnloadModule: "fbdev"
[     9.564] (II) Unloading fbdev
[     9.564] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.564] (II) LoadModule: "vesa"
[     9.564] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.564] (II) Module vesa: vendor="X.Org Foundation"
[     9.564] 	compiled for 1.15.0, module version = 2.3.3
[     9.564] 	Module class: X.Org Video Driver
[     9.564] 	ABI class: X.Org Video Driver, version 15.0
[     9.564] (==) Matched intel as autoconfigured driver 0
[     9.564] (==) Matched nvidia as autoconfigured driver 1
[     9.564] (==) Matched nouveau as autoconfigured driver 2
[     9.564] (==) Matched intel as autoconfigured driver 3
[     9.564] (==) Matched modesetting as autoconfigured driver 4
[     9.564] (==) Matched fbdev as autoconfigured driver 5
[     9.564] (==) Matched vesa as autoconfigured driver 6
[     9.564] (==) Assigned the driver to the xf86ConfigLayout
[     9.564] (II) LoadModule: "intel"
[     9.564] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.564] (II) Module intel: vendor="X.Org Foundation"
[     9.564] 	compiled for 1.15.1, module version = 2.99.910
[     9.564] 	Module class: X.Org Video Driver
[     9.564] 	ABI class: X.Org Video Driver, version 15.0
[     9.564] (II) UnloadModule: "intel"
[     9.564] (II) Unloading intel
[     9.564] (II) Failed to load module "intel" (already loaded, 32528)
[     9.564] (II) LoadModule: "nvidia"
[     9.564] (WW) Warning, couldn't open module nvidia
[     9.564] (II) UnloadModule: "nvidia"
[     9.564] (II) Unloading nvidia
[     9.564] (EE) Failed to load module "nvidia" (module does not exist, 0)
[     9.564] (II) LoadModule: "nouveau"
[     9.564] (WW) Warning, couldn't open module nouveau
[     9.564] (II) UnloadModule: "nouveau"
[     9.564] (II) Unloading nouveau
[     9.564] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     9.564] (II) LoadModule: "modesetting"
[     9.565] (WW) Warning, couldn't open module modesetting
[     9.565] (II) UnloadModule: "modesetting"
[     9.565] (II) Unloading modesetting
[     9.565] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     9.565] (II) LoadModule: "fbdev"
[     9.565] (WW) Warning, couldn't open module fbdev
[     9.565] (II) UnloadModule: "fbdev"
[     9.565] (II) Unloading fbdev
[     9.565] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.565] (II) LoadModule: "vesa"
[     9.565] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     9.565] (II) Module vesa: vendor="X.Org Foundation"
[     9.565] 	compiled for 1.15.0, module version = 2.3.3
[     9.565] 	Module class: X.Org Video Driver
[     9.565] 	ABI class: X.Org Video Driver, version 15.0
[     9.565] (II) UnloadModule: "vesa"
[     9.565] (II) Unloading vesa
[     9.565] (II) Failed to load module "vesa" (already loaded, 0)
[     9.565] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     9.565] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     9.565] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     9.565] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     9.565] (II) VESA: driver for VESA chipsets: vesa
[     9.565] (++) using VT number 1

[     9.566] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.3 (Timo Aaltonen <tjaalton@debian.org>)
[     9.566] (WW) Falling back to old probe method for vesa
[     9.567] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[     9.567] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[     9.567] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     9.567] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     9.567] (==) intel(0): RGB weight 888
[     9.567] (==) intel(0): Default visual is TrueColor
[     9.567] (**) intel(0): Framebuffer tiled
[     9.567] (**) intel(0): Pixmaps tiled
[     9.567] (**) intel(0): "Tear free" disabled
[     9.567] (**) intel(0): Forcing per-crtc-pixmaps? no
[     9.567] (II) intel(0): Output eDP1 has no monitor section
[     9.567] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[     9.567] (II) intel(0): Output VGA1 has no monitor section
[     9.567] (II) intel(0): Output HDMI1 has no monitor section
[     9.567] (II) intel(0): Output VIRTUAL1 has no monitor section
[     9.567] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     9.567] (==) intel(0): DPI set to (96, 96)
[     9.567] (II) Loading sub module "dri2"
[     9.567] (II) LoadModule: "dri2"
[     9.567] (II) Module "dri2" already built-in
[     9.567] (II) UnloadModule: "vesa"
[     9.567] (II) Unloading vesa
[     9.567] (==) Depth 24 pixmap format is 32 bpp
[     9.570] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     9.570] (==) intel(0): Backing store enabled
[     9.570] (==) intel(0): Silken mouse enabled
[     9.570] (II) intel(0): HW Cursor enabled
[     9.570] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     9.571] (==) intel(0): DPMS enabled
[     9.571] (II) intel(0): [DRI2] Setup complete
[     9.571] (II) intel(0): [DRI2]   DRI driver: i965
[     9.571] (II) intel(0): [DRI2]   VDPAU driver: i965
[     9.571] (II) intel(0): direct rendering: DRI2 Enabled
[     9.571] (==) intel(0): hotplug detection: "enabled"
[     9.571] (--) RandR disabled
[     9.574] (II) SELinux: Disabled on system
[     9.585] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     9.585] (II) AIGLX: enabled GLX_ARB_create_context
[     9.585] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     9.585] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     9.585] (II) AIGLX: enabled GLX_INTEL_swap_event
[     9.585] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     9.585] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     9.585] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     9.585] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     9.585] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     9.585] (II) AIGLX: Loaded and initialized i965
[     9.585] (II) GLX: Initialized DRI2 GL provider for screen 0
[     9.587] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     9.616] (II) intel(0): Setting screen physical size to 508 x 285
[     9.629] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     9.646] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     9.646] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.646] (II) LoadModule: "evdev"
[     9.646] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.647] (II) Module evdev: vendor="X.Org Foundation"
[     9.647] 	compiled for 1.15.0, module version = 2.8.2
[     9.647] 	Module class: X.Org XInput Driver
[     9.647] 	ABI class: X.Org XInput driver, version 20.0
[     9.647] (II) Using input driver 'evdev' for 'Power Button'
[     9.647] (**) Power Button: always reports core events
[     9.647] (**) evdev: Power Button: Device: "/dev/input/event2"
[     9.647] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.647] (--) evdev: Power Button: Found keys
[     9.647] (II) evdev: Power Button: Configuring as keyboard
[     9.647] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     9.647] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.647] (**) Option "xkb_rules" "evdev"
[     9.647] (**) Option "xkb_model" "pc105"
[     9.647] (**) Option "xkb_layout" "ch"
[     9.647] (**) Option "xkb_variant" "fr"
[     9.649] (II) XKB: generating xkmfile /tmp/server-53A4CFD27CBE694B87E57086754C176B71A8EEB5.xkm
[     9.657] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     9.657] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.657] (II) Using input driver 'evdev' for 'Video Bus'
[     9.657] (**) Video Bus: always reports core events
[     9.657] (**) evdev: Video Bus: Device: "/dev/input/event7"
[     9.657] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     9.657] (--) evdev: Video Bus: Found keys
[     9.658] (II) evdev: Video Bus: Configuring as keyboard
[     9.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event7"
[     9.658] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     9.658] (**) Option "xkb_rules" "evdev"
[     9.658] (**) Option "xkb_model" "pc105"
[     9.658] (**) Option "xkb_layout" "ch"
[     9.658] (**) Option "xkb_variant" "fr"
[     9.658] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     9.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.658] (II) Using input driver 'evdev' for 'Power Button'
[     9.658] (**) Power Button: always reports core events
[     9.658] (**) evdev: Power Button: Device: "/dev/input/event0"
[     9.658] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.658] (--) evdev: Power Button: Found keys
[     9.658] (II) evdev: Power Button: Configuring as keyboard
[     9.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[     9.658] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     9.658] (**) Option "xkb_rules" "evdev"
[     9.658] (**) Option "xkb_model" "pc105"
[     9.658] (**) Option "xkb_layout" "ch"
[     9.658] (**) Option "xkb_variant" "fr"
[     9.658] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[     9.658] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.658] (II) Using input driver 'evdev' for 'Video Bus'
[     9.658] (**) Video Bus: always reports core events
[     9.658] (**) evdev: Video Bus: Device: "/dev/input/event6"
[     9.658] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     9.658] (--) evdev: Video Bus: Found keys
[     9.658] (II) evdev: Video Bus: Configuring as keyboard
[     9.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3d/LNXVIDEO:00/input/input7/event6"
[     9.658] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[     9.658] (**) Option "xkb_rules" "evdev"
[     9.658] (**) Option "xkb_model" "pc105"
[     9.658] (**) Option "xkb_layout" "ch"
[     9.658] (**) Option "xkb_variant" "fr"
[     9.658] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     9.658] (II) No input driver specified, ignoring this device.
[     9.658] (II) This device may have been added with another device file.
[     9.658] (II) config/udev: Adding drm device (/dev/dri/card1) card1 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[     9.658] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[     9.658] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     9.658] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[     9.658] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[     9.659] (II) No input driver specified, ignoring this device.
[     9.659] (II) This device may have been added with another device file.
[     9.659] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event8)
[     9.659] (II) No input driver specified, ignoring this device.
[     9.659] (II) This device may have been added with another device file.
[     9.659] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[     9.659] (II) No input driver specified, ignoring this device.
[     9.659] (II) This device may have been added with another device file.
[     9.659] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[     9.659] (II) No input driver specified, ignoring this device.
[     9.659] (II) This device may have been added with another device file.
[     9.659] (II) config/udev: Adding input device HDA Intel PCH Headphone Front (/dev/input/event12)
[     9.659] (II) No input driver specified, ignoring this device.
[     9.659] (II) This device may have been added with another device file.
[     9.659] (II) config/udev: Adding input device HDA Intel PCH Headphone Surround (/dev/input/event11)
[     9.659] (II) No input driver specified, ignoring this device.
[     9.659] (II) This device may have been added with another device file.
[     9.659] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     9.659] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.659] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     9.659] (**) AT Translated Set 2 keyboard: always reports core events
[     9.659] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[     9.659] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     9.659] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     9.659] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     9.659] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     9.659] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     9.659] (**) Option "xkb_rules" "evdev"
[     9.659] (**) Option "xkb_model" "pc105"
[     9.659] (**) Option "xkb_layout" "ch"
[     9.659] (**) Option "xkb_variant" "fr"
[     9.659] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[     9.659] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     9.659] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     9.659] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     9.659] (II) LoadModule: "synaptics"
[     9.659] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     9.660] (II) Module synaptics: vendor="X.Org Foundation"
[     9.660] 	compiled for 1.15.0, module version = 1.7.4
[     9.660] 	Module class: X.Org XInput Driver
[     9.660] 	ABI class: X.Org XInput driver, version 20.0
[     9.660] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     9.660] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.660] (**) Option "Device" "/dev/input/event4"
[     9.696] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5668 (res 43)
[     9.696] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4756 (res 68)
[     9.696] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     9.696] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     9.696] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     9.696] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     9.696] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.696] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.708] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[     9.708] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[     9.708] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     9.708] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     9.708] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[     9.708] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     9.708] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     9.708] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     9.708] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     9.708] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.708] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     9.708] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     9.709] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[     9.709] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     9.709] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[     9.709] (**) Dell WMI hotkeys: always reports core events
[     9.709] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[     9.709] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[     9.709] (--) evdev: Dell WMI hotkeys: Found keys
[     9.709] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[     9.709] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event5"
[     9.709] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[     9.709] (**) Option "xkb_rules" "evdev"
[     9.709] (**) Option "xkb_model" "pc105"
[     9.709] (**) Option "xkb_layout" "ch"
[     9.709] (**) Option "xkb_variant" "fr"
[    10.433] (II) intel(0): EDID vendor "AUO", prod id 4413
[    10.433] (II) intel(0): Printing DDC gathered Modelines:
[    10.433] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[   162.365] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event14)
[   162.365] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[   162.366] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[   162.366] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[   162.366] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event14"
[   162.366] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[   162.366] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[   162.366] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[   162.366] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[   162.366] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[   162.366] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[   162.366] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[   162.366] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[   162.366] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   162.366] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input15/event14"
[   162.366] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 13)
[   162.366] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[   162.367] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[   162.367] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[   162.367] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[   162.367] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[   162.368] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse1)
[   162.368] (II) No input driver specified, ignoring this device.
[   162.368] (II) This device may have been added with another device file.

Et lshw :

description: Ordinateur Transportable
    produit: Alienware 14 (Alienware 14)
    fabriquant: Alienware
    version: A09
    numéro de série: 5Q8FK12
    bits: 64 bits
    fonctionnalités: smbios-2.7 dmi-2.7 vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=portable family=00 frontpanel_password=disabled keyboard_password=disabled power-on_password=disabled sku=Alienware 14 uuid=44454C4C-5100-1038-8046-B5C04F4B3132
  *-core
       description: Carte mère
       produit: 07MJ2Y
       fabriquant: Alienware
       identifiant matériel: 0
       version: A01
       numéro de série: .5Q8FK12.CN129634AQ0029.
       emplacement: Type2 - Board Chassis Location
     *-firmware
          description: BIOS
          fabriquant: Alienware
          identifiant matériel: 0
          version: A09
          date: 04/23/2014
          taille: 128KiB
          capacité: 4032KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz
          fabriquant: Intel Corp.
          identifiant matériel: 4
          information bus: cpu@0
          version: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz
          numéro de série: To Be Filled By O.E.M.
          emplacement: U3E1
          taille: 800MHz
          capacité: 800MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cpufreq
          configuration: cores=4 enabledcores=4 threads=8
        *-cache:0
             description: L1 cache
             identifiant matériel: 9
             emplacement: L1 Cache
             taille: 32KiB
             capacité: 32KiB
             fonctionnalités: synchronous internal write-back instruction
        *-cache:1
             description: L2 cache
             identifiant matériel: a
             emplacement: L2 Cache
             taille: 256KiB
             capacité: 256KiB
             fonctionnalités: synchronous internal write-back unified
        *-cache:2
             description: L3 cache
             identifiant matériel: b
             emplacement: L3 Cache
             taille: 6MiB
             capacité: 6MiB
             fonctionnalités: synchronous internal write-back unified
     *-cache
          description: L1 cache
          identifiant matériel: 8
          emplacement: L1 Cache
          taille: 32KiB
          capacité: 32KiB
          fonctionnalités: synchronous internal write-back data
     *-memory
          description: Mémoire Système
          identifiant matériel: 29
          emplacement: Carte mère
          taille: 8GiB
        *-bank:0
             description: SODIMM DDR3 Synchrone 1600 MHz (0.6 ns)
             produit: M471B5173DB0-YK0
             fabriquant: Samsung
             identifiant matériel: 0
             numéro de série: E1A0ACC4
             emplacement: JDIMM2
             taille: 4GiB
             bits: 64 bits
             horloge: 1600MHz (0.6ns)
        *-bank:1
             description: SODIMM DDR3 Synchrone 1600 MHz (0.6 ns)
             produit: M471B5173DB0-YK0
             fabriquant: Samsung
             identifiant matériel: 1
             numéro de série: E1A0AC26
             emplacement: JDIMM1
             taille: 4GiB
             bits: 64 bits
             horloge: 1600MHz (0.6ns)
     *-pci
          description: Host bridge
          produit: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 06
          bits: 32 bits
          horloge: 33MHz
        *-pci:0
             description: PCI bridge
             produit: Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1
             information bus: pci@0000:00:01.0
             version: 06
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:40 portE/S:4000(taille=4096) mémoire:d0000000-d1ffffff portE/S:a0000000(taille=536870912)
           *-display
                description: VGA compatible controller
                produit: GK107M [GeForce GT 750M]
                fabriquant: NVIDIA Corporation
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: a1
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
                configuration: driver=nouveau latency=0
                ressources: irq:49 mémoire:d0000000-d0ffffff mémoire:a0000000-afffffff mémoire:b0000000-b1ffffff portE/S:4000(taille=128) mémoire:b2000000-b207ffff
        *-display
             description: VGA compatible controller
             produit: 4th Gen Core Processor Integrated Graphics Controller
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 06
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:45 mémoire:d2000000-d23fffff mémoire:c0000000-cfffffff portE/S:5000(taille=64)
        *-multimedia:0
             description: Audio device
             produit: Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
             fabriquant: Intel Corporation
             identifiant matériel: 3
             information bus: pci@0000:00:03.0
             version: 06
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi pciexpress bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             ressources: irq:48 mémoire:d2610000-d2613fff
        *-usb:0
             description: USB controller
             produit: 8 Series/C220 Series Chipset Family USB xHCI
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 05
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:41 mémoire:d2600000-d260ffff
        *-communication
             description: Communication controller
             produit: 8 Series/C220 Series Chipset Family MEI Controller #1
             fabriquant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 04
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             ressources: irq:44 mémoire:d2618000-d261800f
        *-usb:1
             description: USB controller
             produit: 8 Series/C220 Series Chipset Family USB EHCI #2
             fabriquant: Intel Corporation
             identifiant matériel: 1a
             information bus: pci@0000:00:1a.0
             version: 05
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:16 mémoire:d261d000-d261d3ff
        *-multimedia:1
             description: Audio device
             produit: 8 Series/C220 Series Chipset High Definition Audio Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1b
             information bus: pci@0000:00:1b.0
             version: 05
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi pciexpress bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             ressources: irq:47 mémoire:d2614000-d2617fff
        *-pci:1
             description: PCI bridge
             produit: 8 Series/C220 Series Chipset Family PCI Express Root Port #1
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: d5
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 portE/S:2000(taille=4096) mémoire:9fb00000-9fcfffff portE/S:9fd00000(taille=2097152)
        *-pci:2
             description: PCI bridge
             produit: 8 Series/C220 Series Chipset Family PCI Express Root Port #3
             fabriquant: Intel Corporation
             identifiant matériel: 1c.2
             information bus: pci@0000:00:1c.2
             version: d5
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:18 portE/S:3000(taille=4096) mémoire:d2500000-d25fffff
           *-network
                description: Ethernet interface
                produit: Killer E2200 Gigabit Ethernet Controller
                fabriquant: Qualcomm Atheros
                identifiant matériel: 0
                information bus: pci@0000:08:00.0
                nom logique: p2p1
                version: 10
                numéro de série: 34:e6:d7:04:70:73
                taille: 1Gbit/s
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=alx duplex=full ip=46.126.174.34 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
                ressources: irq:46 mémoire:d2500000-d253ffff portE/S:3000(taille=128)
        *-pci:3
             description: PCI bridge
             produit: 8 Series/C220 Series Chipset Family PCI Express Root Port #4
             fabriquant: Intel Corporation
             identifiant matériel: 1c.3
             information bus: pci@0000:00:1c.3
             version: d5
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:19 mémoire:d2400000-d24fffff
           *-generic:0
                description: Unassigned class
                produit: RTS5209 PCI Express Card Reader
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:09:00.0
                version: 01
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list
                configuration: driver=rtsx_pci latency=0
                ressources: irq:42 mémoire:d2401000-d2401fff
           *-generic:1
                description: SD Host controller
                produit: RTS5209 PCI Express Card Reader
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0.1
                information bus: pci@0000:09:00.1
                version: 01
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list
                configuration: driver=sdhci-pci latency=0
                ressources: irq:16 mémoire:d2400000-d24000ff
        *-usb:2
             description: USB controller
             produit: 8 Series/C220 Series Chipset Family USB EHCI #1
             fabriquant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: 05
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:19 mémoire:d261c000-d261c3ff
        *-isa
             description: ISA bridge
             produit: HM87 Express LPC Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 05
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             ressources: irq:0
        *-storage
             description: SATA controller
             produit: 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 05
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             ressources: irq:43 portE/S:5088(taille=8) portE/S:5094(taille=4) portE/S:5080(taille=8) portE/S:5090(taille=4) portE/S:5060(taille=32) mémoire:d261b000-d261b7ff
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: 8 Series/C220 Series Chipset Family SMBus Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 05
             bits: 64 bits
             horloge: 33MHz
             configuration: latency=0
             ressources: mémoire:d2619000-d26190ff portE/S:5040(taille=32)
     *-scsi:0
          identifiant matériel: 1
          nom logique: scsi0
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: WDC WD10JFCX-68N
             fabriquant: Western Digital
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/sda
             version: 82.0
             numéro de série: WD-WXB1E74FP2UL
             taille: 931GiB (1TB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=4096 signature=00084ebb
           *-volume:0
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 1
                information bus: scsi@0:0.0.0,1
                nom logique: /dev/sda1
                nom logique: /var
                version: 1.0
                numéro de série: 1492fd3e-0039-450d-9ae6-8c956133b93e
                taille: 3813MiB
                capacité: 3813MiB
                fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2014-11-25 07:16:52 filesystem=ext4 lastmountpoint=/var modified=2014-11-29 05:26:49 mount.fstype=ext4 mount.options=rw,noatime,data=ordered mounted=2014-11-29 05:26:49 state=mounted
           *-volume:1
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 2
                information bus: scsi@0:0.0.0,2
                nom logique: /dev/sda2
                nom logique: /home
                version: 1.0
                numéro de série: 901025c5-6f42-4225-a611-d5cf96ea8186
                taille: 927GiB
                capacité: 927GiB
                fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2014-11-25 07:17:05 filesystem=ext4 lastmountpoint=/home modified=2014-11-29 05:26:49 mount.fstype=ext4 mount.options=rw,noatime,data=ordered mounted=2014-11-29 05:26:49 state=mounted
     *-scsi:1
          identifiant matériel: 2
          nom logique: scsi4
          fonctionnalités: emulated
        *-cdrom
             description: DVD-RAM writer
             produit: DVD+-RW GS40N
             fabriquant: HL-DT-ST
             identifiant matériel: 0.0.0
             information bus: scsi@4:0.0.0
             nom logique: /dev/cdrom
             nom logique: /dev/sr0
             version: A100
             fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=open
     *-scsi:2
          identifiant matériel: 3
          nom logique: scsi5
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: INTEL SSDMCEAC12
             identifiant matériel: 0.0.0
             information bus: scsi@5:0.0.0
             nom logique: /dev/sdb
             version: LLLi
             numéro de série: CVLI4191009W120E
             taille: 111GiB (120GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=512 signature=000b79e2
           *-volume:0
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 1
                information bus: scsi@5:0.0.0,1
                nom logique: /dev/sdb1
                nom logique: /
                version: 1.0
                numéro de série: b34a3bf5-e23c-481a-af72-adb5f2ac8a2c
                taille: 31GiB
                capacité: 31GiB
                fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2014-11-25 07:15:11 filesystem=ext4 lastmountpoint=/ modified=2014-11-29 05:26:48 mount.fstype=ext4 mount.options=rw,noatime,discard,errors=remount-ro,commit=60,data=ordered mounted=2014-11-29 05:26:49 state=mounted
           *-volume:1
                description: Windows FAT volume
                fabriquant: mkfs.fat
                identifiant matériel: 2
                information bus: scsi@5:0.0.0,2
                nom logique: /dev/sdb2
                nom logique: /boot/efi
                version: FAT32
                numéro de série: f2bd-18f2
                taille: 298MiB
                capacité: 300MiB
                fonctionnalités: primary bootable fat initialized
                configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
           *-volume:2
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 3
                information bus: scsi@5:0.0.0,3
                nom logique: /dev/sdb3
                nom logique: /data
                version: 1.0
                numéro de série: 82d13a9c-cc8c-43fb-a09c-bb254a0fee19
                taille: 80GiB
                capacité: 80GiB
                fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2014-11-25 07:15:41 filesystem=ext4 modified=2014-11-29 05:26:49 mount.fstype=ext4 mount.options=rw,noatime,discard,commit=60,data=ordered mounted=2014-11-29 05:26:49 state=mounted
  *-battery
       description: Lithium Ion Battery
       produit: DELL 8X70T49A
       fabriquant: SANYO
       identifiant matériel: 1
       emplacement: Sys. Battery Bay
       capacité: 67000mWh
       configuration: voltage=10.8V

Lspci -v :

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: d0000000-d1ffffff
	Prefetchable memory behind bridge: 00000000a0000000-00000000bfffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 45
	Memory at d2000000 (64-bit, non-prefetchable) [size=4M]
	Memory at c0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 5000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 48
	Memory at d2610000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0, IRQ 41
	Memory at d2600000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 44
	Memory at d2618000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0, IRQ 16
	Memory at d261d000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 47
	Memory at d2614000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 9fb00000-9fcfffff
	Prefetchable memory behind bridge: 000000009fd00000-000000009fefffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d2500000-d25fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	Memory behind bridge: d2400000-d24fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0, IRQ 19
	Memory at d261c000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
	Subsystem: Dell Device 05a9
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Device 05a9
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 43
	I/O ports at 5088 [size=8]
	I/O ports at 5094 [size=4]
	I/O ports at 5080 [size=8]
	I/O ports at 5090 [size=4]
	I/O ports at 5060 [size=32]
	Memory at d261b000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
	Subsystem: Dell Device 05a9
	Flags: medium devsel
	Memory at d2619000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 5040 [size=32]

01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 05a9
	Flags: bus master, fast devsel, latency 0, IRQ 49
	Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
	Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Memory at b0000000 (64-bit, prefetchable) [size=32M]
	I/O ports at 4000 [size=128]
	Expansion ROM at b2000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

08:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 10)
	Subsystem: Dell Device 05ac
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at d2500000 (64-bit, non-prefetchable) [size=256K]
	I/O ports at 3000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: alx

09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
	Subsystem: Dell Device 05ac
	Flags: bus master, fast devsel, latency 0, IRQ 42
	Memory at d2401000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci

09:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
	Subsystem: Dell Device 05ac
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at d2400000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

lsmod :

lsmod
Module                  Size  Used by
snd_hda_codec_hdmi     46368  1 
snd_hda_codec_realtek    65580  1 
ip6t_REJECT            12939  1 
xt_hl                  12521  6 
ip6t_rt                13537  3 
nf_conntrack_ipv6      18894  8 
nf_defrag_ipv6         34768  1 nf_conntrack_ipv6
ipt_REJECT             12541  1 
xt_LOG                 17717  10 
xt_limit               12711  13 
xt_tcpudp              12884  18 
xt_addrtype            12635  4 
nf_conntrack_ipv4      15012  8 
nf_defrag_ipv4         12758  1 nf_conntrack_ipv4
snd_hda_intel          56451  3 
xt_conntrack           12760  16 
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
nouveau              1097199  0 
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
ip6table_filter        12815  1 
x86_pkg_temp_thermal    14205  0 
ip6_tables             27025  1 ip6table_filter
intel_powerclamp       14705  0 
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
coretemp               13435  0 
snd_seq_midi           13324  0 
kvm_intel             143148  0 
snd_seq_midi_event     14899  1 snd_seq_midi
nf_conntrack_netbios_ns    12665  0 
snd_rawmidi            30144  1 snd_seq_midi
nf_conntrack_broadcast    12589  1 nf_conntrack_netbios_ns
kvm                   455785  1 kvm_intel
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
nf_nat_ftp             12770  0 
nf_nat                 21841  1 nf_nat_ftp
nf_conntrack_ftp       18638  1 nf_nat_ftp
nf_conntrack           96976  8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6
i915                  784207  6 
iptable_filter         12810  1 
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
ip_tables              27239  1 iptable_filter
mxm_wmi                13021  1 nouveau
crct10dif_pclmul       14289  0 
x_tables               34059  13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT
crc32_pclmul           13113  0 
ghash_clmulni_intel    13216  0 
snd_timer              29482  2 snd_pcm,snd_seq
ttm                    85150  1 nouveau
drm_kms_helper         55071  2 i915,nouveau
aesni_intel            55624  0 
aes_x86_64             17131  1 aesni_intel
lrw                    13286  1 aesni_intel
rtsx_pci_ms            18151  0 
gf128mul               14951  1 lrw
glue_helper            13990  1 aesni_intel
drm                   303102  7 ttm,i915,drm_kms_helper,nouveau
snd                    69322  16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
ablk_helper            13597  1 aesni_intel
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
memstick               16966  1 rtsx_pci_ms
mei_me                 18627  0 
i2c_algo_bit           13413  2 i915,nouveau
mei                    82276  1 mei_me
soundcore              12680  1 snd
lpc_ich                21080  0 
serio_raw              13462  0 
dell_wmi               12761  0 
sparse_keymap          13948  1 dell_wmi
wmi                    19177  3 dell_wmi,mxm_wmi,nouveau
video                  19476  2 i915,nouveau
mac_hid                13205  0 
nls_iso8859_1          12713  1 
hid_generic            12548  0 
hid_logitech_dj        18581  0 
usbhid                 52659  0 
hid                   106148  3 hid_generic,usbhid,hid_logitech_dj
rtsx_pci_sdmmc         23274  0 
psmouse               106714  0 
sdhci_pci              23172  0 
ahci                   25819  6 
rtsx_pci               46202  2 rtsx_pci_ms,rtsx_pci_sdmmc
sdhci                  43015  1 sdhci_pci
alx                    32452  0 
libahci                32716  1 ahci
mdio                   13807  1 alx

Lspci prétend que le noyau utilise "nouveau" alors qu'il n'est pas installé.

Dernière modification par fcn50 (Le 29/11/2014, à 07:23)

F50 · Le 04/12/2014, à 07:49

Un ptit up

Jackobo · Le 04/12/2014, à 12:57

Bonjour fcn50,

Je vous conseille de suivre mon post publié ce matin sur le forum pour l'installation des drivers NVIDIA .
J'ai eu beaucoup de soucis avec les packages d'Ubuntu. Le pilote "nouveau" est entré en conflit avec votre driver NVIDIA dans votre cas.
Même s'il n'est pas installé par les packages deb, il y a quelque chose qui le fait croire qu"il utilise toujours le driver "nouveau".

Le tuto pour installer un driver NVIDIA :
http://forum.ubuntu-fr.org/viewtopic.php?id=1739251

Amicalement,
Jackobo

Dernière modification par Jackobo (Le 04/12/2014, à 13:00)

F50 · Le 04/12/2014, à 19:14

Salut Jackobo,

Merci pour cette info, je vais essayer plus tard, là je suis sur une autre machine. Question, ma carte est une Optimus, donc comment ça se passe, faut-il après installation du pilote Nvidia du site installer bumblebee, si oui, comment ? Ce dernier permet de swichter entre l'Intel peu gourmande et la Nvidia (gain en autonomie).

Je croyais Nvidia mieux pour nunux mais j'ai moins d'emmerdes avec mon AMD et son pilote du site constructeur qui fonctionne. Les pilotes buntu, je les ai toujours trouvé pourris et jamais installé après avoir vu la couleur.

Avec ce nouveau portable j'ai essayé d'installé plusieurs fois d'après la doc et le résultat est mon sujet ouvert ici-même.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 18/11/2014, à 09:17

[Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#2 Le 18/11/2014, à 09:21

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#3 Le 18/11/2014, à 09:34

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#4 Le 18/11/2014, à 10:09

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#5 Le 21/11/2014, à 19:25

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#6 Le 21/11/2014, à 19:35

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#7 Le 21/11/2014, à 19:43

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#8 Le 21/11/2014, à 19:52

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#9 Le 21/11/2014, à 19:56

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#10 Le 21/11/2014, à 20:12

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#11 Le 22/11/2014, à 00:32

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#12 Le 22/11/2014, à 02:45

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#13 Le 22/11/2014, à 17:24

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#14 Le 26/11/2014, à 12:34

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#15 Le 27/11/2014, à 19:44

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#16 Le 28/11/2014, à 09:20

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#17 Le 28/11/2014, à 10:58

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#18 Le 28/11/2014, à 12:57

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#19 Le 28/11/2014, à 14:45

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#20 Le 28/11/2014, à 15:30

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#21 Le 28/11/2014, à 19:43

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#22 Le 29/11/2014, à 07:21

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#23 Le 04/12/2014, à 07:49

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#24 Le 04/12/2014, à 12:57

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

#25 Le 04/12/2014, à 19:14

Re : [Résolu] Pilotes à installer pour Nvidia GT750M/intel HD4600 ?

Pied de page des forums