Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#51 Le 19/09/2014, à 18:39

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

quelqu'un saurait quoi faire ?


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#52 Le 20/09/2014, à 03:30

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

J'étais en train de télécharger boot-repair mais il y a une fenêtre "Réparateur de démarrage qui s'ouvre charge et s' arrete pendant déjà 10 minutes ... Dois-je attendre encore un peu ...? J' ai du mal à utiliser le PC donc un boot-info e parait approprié pour pouvoir vous/m' aider !
Cordialement .


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#53 Le 20/09/2014, à 04:54

F50

Re : Je ne récupère jamais ma définition originale au redémarrage .

Ton problème est d'ordre graphique et boot-repair n'y changera rien. Je ne sais comment tu as installé buntu mais tu avais 6 xorg.conf après tes tentatives d'installer nvidia, pas étonnant que ce soit devenu un merdier. Étant donné que ça marchait avec nouveau, il faut trouver pourquoi ça ne veut plus ou réinstaller (ce qui prendrait moins de temps à ce stade).

#54 Le 20/09/2014, à 05:20

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Vous pensez vraiment qu'il faudrait ré-installer l'OS ? Mais il est vrai que je n' ai jamais eu de parametrage parfait de l' affichage , aussi bien au démarrage (qui changeait en arrivant sur le bureau) ! Donc bon , peut être qu'en repartant à zéro , ce serait mieux ..., en installant ,dés que les MAJ sont fini, Nvidia setting et les pilotes proprio .. au moins je n' aurais plus à m' en occupé et je ne ferais donc pas de doublons ...


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#55 Le 20/09/2014, à 05:21

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Puis-je garder mes données ? Fichiers, musique, films , programmes actuels ?


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#56 Le 20/09/2014, à 06:04

F50

Re : Je ne récupère jamais ma définition originale au redémarrage .

Pour tes fichiers musique, films, vidéos etc. Bien sur, il te suffit de démarrer sur un live cd et de copier/coller ces derniers sur un DD externe, une fois la nouvelle install faite tu n'auras qu'à les recopier dans ton nouveau /home. Pour les programmes, il te suffiras de les installer à nouveau. En revanche, je ne copierais pas tes fichiers de configurations de ton actuel /home étant donné que ton système ne fonctionne pas et qu'il y en a peut-être certains qui ne sont pas fiables ou corrompus.

P.S. Je pense effectivement que la réinstallation est la meilleure voie étant donné la situation où te trouve, qui t'échappes du fait que tu as fais dysfonctionner le système. Il vaut mieux repartir sur des bases propres, ça prendra moins de temps que d'essayer de trouver midi à quatorze heure. Teste la machine en live cd avant l'installation, histoire d'avoir un aperçu.

Dernière modification par fcn50 (Le 20/09/2014, à 06:09)

#57 Le 20/09/2014, à 09:25

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Bon merci , c'est fait ! Quel pilote me conseille tu du coup pour que je retrouve une belle résolution ?
Et si je parametre l' affichage via Nvidia settings seulement une fois , est ce que ça enregistrera seulement un Xorg.conf du coup ?


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#58 Le 20/09/2014, à 13:03

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

J'ai installé le pilote proprio Nvidia 304 , et au reboot quand je vais dans le Nvidia settings ; je règle comme c'était avant et je clique sur ; "Apply" et ça ne change rien du tout et ça quitte le Nividia settings .. Que faire ? Il manque des installs nvidia ?


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#59 Le 21/09/2014, à 06:10

F50

Re : Je ne récupère jamais ma définition originale au redémarrage .

Si :

Cyrustik a écrit :

Quel pilote me conseille tu du coup pour que je retrouve une belle résolution ?

Pour ensuite :

Cyrustik a écrit :

J'ai installé le pilote proprio Nvidia 304

Évite de poser la question si c'est pour y répondre par toi-même.

Quel est le modèle et comment ton moniteur est-il  branché ?

#60 Le 21/09/2014, à 22:44

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

La fiche technique LCD-Compare de ce produit est en cours de préparation et va bientôt être mise à jour.
En attendant, voici quelques informations déjà disponibles sur ce produit :

Téléviseur de 117 cm / 16:9
Résolution : 1920 x 1080
Luminosité : 430 cd/m²
Contraste : 5000:1
Temps de réponse : 6 ms
Fréquence max : 50Hz
Angle de vision : 178°
Tuner TNT HD
Puissance audio : 2 x 6 W
2 entrées HDMI 1.3
Port USB
Dimensions nettes : 112.9 x 29.6 x 76.6 cm
Couleur : noir
Référence (EAN et/ou UPC) :     3700474772126
Autres Dénominations :     Continental Edison CELCD46HD3

Il est branché en Hdmi


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#61 Le 22/09/2014, à 12:37

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Bon bin je croyais que le pîlote 331 aurait régler mon soucis  mais une fois que j' ai réglé ma résolution voulu , j'enregistre (en ayant ouvert Nvidia settings avec "sudo") ma résolution et reboot pour voir si "enfin" ma résolution reste ..
Et bien j' ai toujours le même souci d' une marge à droite et en bas et j' ai la possibilité de "bouger" le bureau entier !!
Je vous joint mon Xorg.conf au cas ou ...

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 331.20  (buildd@rhenium)  Wed Dec  4 16:24:23 UTC 2013

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CON LED TV"
    HorizSync       14.0 - 68.0
    VertRefresh     48.0 - 62.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 650"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "1920x1080_60 +0+0 {viewportout=1852x1041+34+19}; nvidia-auto-select +0+0 {viewportout=1852x1041+34+19}; 1920x1080_50 +0+0 {viewportout=1850x1040+35+19}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Cordialement
PS : je précise que je ne vois pas la barre de tache en bas   

sudo nvidia-xconfig
[sudo] password for cyrustik: 

Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as
'/etc/X11/xorg.conf.nvidia-xconfig-original'
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

Dernière modification par Cyrustik (Le 24/09/2014, à 12:49)


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#62 Le 22/09/2014, à 12:54

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

En fait je viens de trouver mais ne sais pas comment le corriger .. quand je redémarre le Nvidia settings oubli tout simplement ma config' elle se remet en auto , et change la configuration toute seule .. comment sauver ma config pour qu' elle revienne a la normale au reboot ? Merci !!


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#63 Le 22/09/2014, à 12:58

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Même quand je lis une vidéo en plein écran , je peux bouger l' image ! C'est pour bien vous faire comprendre mon soucis !


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#64 Le 22/09/2014, à 13:16

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Il y a pas mal d'erreur non ?:
1411388114.png

http://pix.toile-libre.org/?img=1411388114.png

Dernière modification par Cyrustik (Le 22/09/2014, à 13:17)


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#65 Le 22/09/2014, à 13:32

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Mon Xsession :

#!/bin/sh
#
# /etc/X11/Xsession
#
# global Xsession file -- used by display managers and xinit (startx)

# $Id: Xsession 967 2005-12-27 07:20:55Z dnusinow $

set -e

PROGNAME=Xsession

message () {
  # pretty-print messages of arbitrary length; use xmessage if it
  # is available and $DISPLAY is set
  MESSAGE="$PROGNAME: $*"
  echo "$MESSAGE" | fold -s -w ${COLUMNS:-80} >&2
  if [ -n "$DISPLAY" ] && which xmessage > /dev/null 2>&1; then
    echo "$MESSAGE" | fold -s -w ${COLUMNS:-80} | xmessage -center -file -
  fi
}

message_nonl () {
  # pretty-print messages of arbitrary length (no trailing newline); use
  # xmessage if it is available and $DISPLAY is set
  MESSAGE="$PROGNAME: $*"
  echo -n "$MESSAGE" | fold -s -w ${COLUMNS:-80} >&2;
  if [ -n "$DISPLAY" ] && which xmessage > /dev/null 2>&1; then
    echo -n "$MESSAGE" | fold -s -w ${COLUMNS:-80} | xmessage -center -file -
  fi
}

errormsg () {
  # exit script with error
  message "$*"
  exit 1
}

internal_errormsg () {
  # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
  # One big call to message() for the sake of xmessage; if we had two then
  # the user would have dismissed the error we want reported before seeing the
  # request to report it.
  errormsg "$*" \
           "Please report the installed version of the \"x11-common\"" \
           "package and the complete text of this error message to" \
           "<debian-x@lists.debian.org>."
}

# initialize variables for use by all session scripts

OPTIONFILE=/etc/X11/Xsession.options

SYSRESOURCES=/etc/X11/Xresources
USRRESOURCES=$HOME/.Xresources

SYSSESSIONDIR=/etc/X11/Xsession.d
USERXSESSION=$HOME/.xsession
USERXSESSIONRC=$HOME/.xsessionrc
ALTUSERXSESSION=$HOME/.Xsession
ERRFILE=$HOME/.xsession-errors

# attempt to create an error file; abort if we cannot
if (umask 077 && touch "$ERRFILE") 2> /dev/null && [ -w "$ERRFILE" ] &&
  [ ! -L "$ERRFILE" ]; then
  chmod 600 "$ERRFILE"
elif ERRFILE=$(tempfile 2> /dev/null); then
  if ! ln -sf "$ERRFILE" "${TMPDIR:=/tmp}/xsession-$USER"; then
    message "warning: unable to symlink \"$TMPDIR/xsession-$USER\" to" \
             "\"$ERRFILE\"; look for session log/errors in" \
             "\"$TMPDIR/xsession-$USER\"."
  fi
else
  errormsg "unable to create X session log/error file; aborting."
fi

# truncate ERRFILE if it is too big to avoid disk usage DoS
if [ "`stat -c%s \"$ERRFILE\"`" -gt 500000 ]; then
  T=`mktemp -p "$HOME"`
  tail -c 500000 "$ERRFILE" > "$T" && mv -f "$T" "$ERRFILE" || rm -f "$T"
fi

exec >>"$ERRFILE" 2>&1

echo "$PROGNAME: X session started for $LOGNAME at $(date)"

# sanity check; is our session script directory present?
if [ ! -d "$SYSSESSIONDIR" ]; then
  errormsg "no \"$SYSSESSIONDIR\" directory found; aborting."
fi

# Attempt to create a file of non-zero length in /tmp; a full filesystem can
# cause mysterious X session failures.  We do not use touch, :, or test -w
# because they won't actually create a file with contents.  We also let standard
# error from tempfile and echo go to the error file to aid the user in
# determining what went wrong.
WRITE_TEST=$(tempfile)
if ! echo "*" >>"$WRITE_TEST"; then
  message "warning: unable to write to ${WRITE_TEST%/*}; X session may exit" \
          "with an error"
fi
rm -f "$WRITE_TEST"

# use run-parts to source every file in the session directory; we source
# instead of executing so that the variables and functions defined above
# are available to the scripts, and so that they can pass variables to each
# other
SESSIONFILES=$(run-parts --list $SYSSESSIONDIR)
if [ -n "$SESSIONFILES" ]; then
  set +e
  for SESSIONFILE in $SESSIONFILES; do
    . $SESSIONFILE
  done
  set -e
fi

exit 0

# vim:set ai et sts=2 sw=2 tw=80:

Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#66 Le 22/09/2014, à 13:56

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Quelqu'un de patient(^^) pourrait m' aider ?


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#67 Le 23/09/2014, à 05:54

F50

Re : Je ne récupère jamais ma définition originale au redémarrage .

Ton écran est une TV ce qui n'est pas la même chose qu'un moniteur, je pense que l'histoire des bords noirs provient d'un réglage sur le TV > underscan.

Cyrustik a écrit :

Il y a pas mal d'erreur non ?:

Il n'y a aucune erreur. Ces dernières s'il y en a, peuvent êtres consultées dans /var/log/Xorg.0.log et pas dans /etc/X11/ qui est un dossier de configuration.

Cyrustik a écrit :

Mon Xsession :

Je me répète, OUBLIE ce fichier que tu ne dois toucher en aucun cas ! Il n'a rien avoir avec ton problème.

#68 Le 23/09/2014, à 08:14

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

D'accord , merci de ta précision  , alors je te transmet le contenu de mon fichier /var/log/Xorg.0.log "mais j' ai aussi un fichier (que je ne peux pas ouvrir avec gedit) qui s' appelle /var/log/Xorg.0.log.old" :

[    17.106] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    17.107] X Protocol Version 11, Revision 0
[    17.107] Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
[    17.107] Current Operating System: Linux Xubuntu 3.2.0-68-generic #102-Ubuntu SMP Tue Aug 12 22:02:15 UTC 2014 x86_64
[    17.107] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-68-generic root=UUID=2e5a2653-5b91-4784-a48c-2151984f4378 ro quiet splash
[    17.107] Build Date: 16 October 2013  04:41:23PM
[    17.107] xorg-server 2:1.11.4-0ubuntu10.14 (For technical support please see http://www.ubuntu.com/support) 
[    17.107] Current version of pixman: 0.30.2
[    17.107] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    17.107] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.107] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 22 18:57:40 2014
[    17.107] (==) Using config file: "/etc/X11/xorg.conf"
[    17.107] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.145] (==) ServerLayout "Layout0"
[    17.145] (**) |-->Screen "Screen0" (0)
[    17.145] (**) |   |-->Monitor "Monitor0"
[    17.145] (**) |   |-->Device "Device0"
[    17.145] (**) |-->Input Device "Keyboard0"
[    17.145] (**) |-->Input Device "Mouse0"
[    17.145] (**) Option "Xinerama" "0"
[    17.145] (==) Automatically adding devices
[    17.145] (==) Automatically enabling devices
[    17.145] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.145] 	Entry deleted from font path.
[    17.145] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    17.145] 	Entry deleted from font path.
[    17.145] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    17.145] 	Entry deleted from font path.
[    17.145] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    17.145] 	Entry deleted from font path.
[    17.145] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    17.145] 	Entry deleted from font path.
[    17.145] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    17.145] 	Entry deleted from font path.
[    17.145] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    17.145] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    17.145] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    17.145] (WW) Disabling Keyboard0
[    17.145] (WW) Disabling Mouse0
[    17.145] (II) Loader magic: 0x7feb7439bb00
[    17.145] (II) Module ABI versions:
[    17.145] 	X.Org ANSI C Emulation: 0.4
[    17.145] 	X.Org Video Driver: 11.0
[    17.145] 	X.Org XInput driver : 16.0
[    17.145] 	X.Org Server Extension : 6.0
[    17.146] (--) PCI:*(0:1:0:0) 10de:0fc6:3842:2653 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    17.146] (II) Open ACPI successful (/var/run/acpid.socket)
[    17.146] (II) LoadModule: "extmod"
[    17.146] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    17.146] (II) Module extmod: vendor="X.Org Foundation"
[    17.146] 	compiled for 1.11.3, module version = 1.0.0
[    17.146] 	Module class: X.Org Server Extension
[    17.146] 	ABI class: X.Org Server Extension, version 6.0
[    17.146] (II) Loading extension MIT-SCREEN-SAVER
[    17.146] (II) Loading extension XFree86-VidModeExtension
[    17.146] (II) Loading extension XFree86-DGA
[    17.146] (II) Loading extension DPMS
[    17.146] (II) Loading extension XVideo
[    17.146] (II) Loading extension XVideo-MotionCompensation
[    17.146] (II) Loading extension X-Resource
[    17.146] (II) LoadModule: "dbe"
[    17.146] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    17.147] (II) Module dbe: vendor="X.Org Foundation"
[    17.147] 	compiled for 1.11.3, module version = 1.0.0
[    17.147] 	Module class: X.Org Server Extension
[    17.147] 	ABI class: X.Org Server Extension, version 6.0
[    17.147] (II) Loading extension DOUBLE-BUFFER
[    17.147] (II) LoadModule: "glx"
[    17.147] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    17.162] (II) Module glx: vendor="NVIDIA Corporation"
[    17.162] 	compiled for 4.0.2, module version = 1.0.0
[    17.162] 	Module class: X.Org Server Extension
[    17.162] (II) NVIDIA GLX Module  331.20  Wed Oct 30 17:36:48 PDT 2013
[    17.162] (II) Loading extension GLX
[    17.162] (II) LoadModule: "record"
[    17.162] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    17.162] (II) Module record: vendor="X.Org Foundation"
[    17.162] 	compiled for 1.11.3, module version = 1.13.0
[    17.162] 	Module class: X.Org Server Extension
[    17.162] 	ABI class: X.Org Server Extension, version 6.0
[    17.162] (II) Loading extension RECORD
[    17.162] (II) LoadModule: "dri"
[    17.162] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    17.163] (II) Module dri: vendor="X.Org Foundation"
[    17.163] 	compiled for 1.11.3, module version = 1.0.0
[    17.163] 	ABI class: X.Org Server Extension, version 6.0
[    17.163] (II) Loading extension XFree86-DRI
[    17.163] (II) LoadModule: "dri2"
[    17.163] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.163] (II) Module dri2: vendor="X.Org Foundation"
[    17.163] 	compiled for 1.11.3, module version = 1.2.0
[    17.163] 	ABI class: X.Org Server Extension, version 6.0
[    17.163] (II) Loading extension DRI2
[    17.163] (II) LoadModule: "nvidia"
[    17.163] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    17.163] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.163] 	compiled for 4.0.2, module version = 1.0.0
[    17.163] 	Module class: X.Org Video Driver
[    17.163] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:16:53 PDT 2013
[    17.163] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.163] (++) using VT number 7

[    17.165] (II) Loading sub module "fb"
[    17.165] (II) LoadModule: "fb"
[    17.165] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.165] (II) Module fb: vendor="X.Org Foundation"
[    17.165] 	compiled for 1.11.3, module version = 1.0.0
[    17.165] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.165] (II) Loading sub module "wfb"
[    17.165] (II) LoadModule: "wfb"
[    17.166] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    17.166] (II) Module wfb: vendor="X.Org Foundation"
[    17.166] 	compiled for 1.11.3, module version = 1.0.0
[    17.166] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.166] (II) Loading sub module "ramdac"
[    17.166] (II) LoadModule: "ramdac"
[    17.166] (II) Module "ramdac" already built-in
[    17.166] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    17.166] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    17.166] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.166] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    17.166] (==) NVIDIA(0): RGB weight 888
[    17.166] (==) NVIDIA(0): Default visual is TrueColor
[    17.166] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.166] (**) NVIDIA(0): Option "Stereo" "0"
[    17.166] (**) NVIDIA(0): Option "SLI" "Off"
[    17.166] (**) NVIDIA(0): Option "MultiGPU" "Off"
[    17.166] (**) NVIDIA(0): Option "BaseMosaic" "off"
[    17.166] (**) NVIDIA(0): Stereo disabled by request
[    17.166] (**) NVIDIA(0): NVIDIA SLI disabled.
[    17.166] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[    17.166] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 {viewportout=1840x1035+40+22}; nvidia-auto-select +0+0 {viewportout=1810x1018+55+30}"
[    17.166] (**) NVIDIA(0): Enabling 2D acceleration
[    17.898] (II) NVIDIA(0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    17.898] (II) NVIDIA(0):     stereo.
[    17.898] drmOpenDevice: node name is /dev/dri/card0
[    17.902] drmOpenByBusid: Searching for BusID PCI:1:0:0
[    17.902] drmOpenDevice: node name is /dev/dri/card0
[    17.906] drmOpenByBusid: drmOpenMinor returns -1
[    17.912] drmOpenDevice: node name is /dev/dri/card1
[    17.916] drmOpenByBusid: drmOpenMinor returns -1
[    17.916] drmOpenDevice: node name is /dev/dri/card2
[    17.920] drmOpenByBusid: drmOpenMinor returns -1
[    17.920] drmOpenDevice: node name is /dev/dri/card3
[    17.924] drmOpenByBusid: drmOpenMinor returns -1
[    17.924] drmOpenDevice: node name is /dev/dri/card4
[    17.927] drmOpenByBusid: drmOpenMinor returns -1
[    17.927] drmOpenDevice: node name is /dev/dri/card5
[    17.931] drmOpenByBusid: drmOpenMinor returns -1
[    17.931] drmOpenDevice: node name is /dev/dri/card6
[    17.935] drmOpenByBusid: drmOpenMinor returns -1
[    17.935] drmOpenDevice: node name is /dev/dri/card7
[    17.939] drmOpenByBusid: drmOpenMinor returns -1
[    17.939] drmOpenDevice: node name is /dev/dri/card8
[    17.942] drmOpenByBusid: drmOpenMinor returns -1
[    17.942] drmOpenDevice: node name is /dev/dri/card9
[    17.946] drmOpenByBusid: drmOpenMinor returns -1
[    17.946] drmOpenDevice: node name is /dev/dri/card10
[    17.950] drmOpenByBusid: drmOpenMinor returns -1
[    17.950] drmOpenDevice: node name is /dev/dri/card11
[    17.954] drmOpenByBusid: drmOpenMinor returns -1
[    17.954] drmOpenDevice: node name is /dev/dri/card12
[    17.957] drmOpenByBusid: drmOpenMinor returns -1
[    17.957] drmOpenDevice: node name is /dev/dri/card13
[    17.961] drmOpenByBusid: drmOpenMinor returns -1
[    17.961] drmOpenDevice: node name is /dev/dri/card14
[    17.965] drmOpenByBusid: drmOpenMinor returns -1
[    17.965] drmOpenDevice: node name is /dev/dri/card15
[    17.969] drmOpenByBusid: drmOpenMinor returns -1
[    17.970] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 650 (GK107) at PCI:1:0:0 (GPU-0)
[    17.970] (--) NVIDIA(0): Memory: 2097152 kBytes
[    17.970] (--) NVIDIA(0): VideoBIOS: 80.07.35.00.56
[    17.970] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    17.971] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 650 at PCI:1:0:0
[    17.971] (--) NVIDIA(0):     CRT-0
[    17.971] (--) NVIDIA(0):     DFP-0
[    17.971] (--) NVIDIA(0):     CON LED TV (DFP-1) (boot, connected)
[    17.971] (--) NVIDIA(0):     DFP-2
[    17.971] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    17.971] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    17.971] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    17.971] (--) NVIDIA(0): CON LED TV (DFP-1): Internal Single Link TMDS
[    17.971] (--) NVIDIA(0): CON LED TV (DFP-1): 165.0 MHz maximum pixel clock
[    17.971] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[    17.971] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[    17.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    17.971] (**) NVIDIA(0):     device CON LED TV (DFP-1) (Using EDID frequencies has been
[    17.971] (**) NVIDIA(0):     enabled on all display devices.)
[    17.971] (WW) NVIDIA(GPU-0): The EDID for CON LED TV (DFP-1) contradicts itself: mode
[    17.971] (WW) NVIDIA(GPU-0):     "1920x1080" is specified in the EDID; however, the EDID's
[    17.971] (WW) NVIDIA(GPU-0):     valid VertRefresh range (48.000-62.000 Hz) would exclude
[    17.971] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (33.0 Hz); ignoring VertRefresh
[    17.971] (WW) NVIDIA(GPU-0):     check for mode "1920x1080".
[    17.974] (II) NVIDIA(0): Validated MetaModes:
[    17.974] (II) NVIDIA(0):     "nvidia-auto-select+0+0{viewportout=1840x1035+40+22}"
[    17.974] (II) NVIDIA(0):     "nvidia-auto-select+0+0{viewportout=1810x1018+55+30}"
[    17.974] (II) NVIDIA(0): Virtual screen size determined to be 1840 x 1035
[    18.014] (--) NVIDIA(0): DPI set to (45, 46); computed from "UseEdidDpi" X config
[    18.014] (--) NVIDIA(0):     option
[    18.014] (--) Depth 24 pixmap format is 32 bpp
[    18.014] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    18.014] (II) NVIDIA:     access.
[    18.018] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{viewportout=1840x1035+40+22}"
[    18.089] (II) Loading extension NV-GLX
[    18.117] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.117] (==) NVIDIA(0): Backing store disabled
[    18.118] (==) NVIDIA(0): Silken mouse enabled
[    18.118] (**) NVIDIA(0): DPMS enabled
[    18.118] (II) Loading extension NV-CONTROL
[    18.118] (II) Loading extension XINERAMA
[    18.118] (II) Loading sub module "dri2"
[    18.118] (II) LoadModule: "dri2"
[    18.119] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    18.119] (II) Module dri2: vendor="X.Org Foundation"
[    18.119] 	compiled for 1.11.3, module version = 1.2.0
[    18.119] 	ABI class: X.Org Server Extension, version 6.0
[    18.119] (II) NVIDIA(0): [DRI2] Setup complete
[    18.119] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    18.119] (--) RandR disabled
[    18.119] (II) Initializing built-in extension Generic Event Extension
[    18.119] (II) Initializing built-in extension SHAPE
[    18.119] (II) Initializing built-in extension MIT-SHM
[    18.119] (II) Initializing built-in extension XInputExtension
[    18.119] (II) Initializing built-in extension XTEST
[    18.119] (II) Initializing built-in extension BIG-REQUESTS
[    18.119] (II) Initializing built-in extension SYNC
[    18.119] (II) Initializing built-in extension XKEYBOARD
[    18.119] (II) Initializing built-in extension XC-MISC
[    18.119] (II) Initializing built-in extension SECURITY
[    18.119] (II) Initializing built-in extension XINERAMA
[    18.119] (II) Initializing built-in extension XFIXES
[    18.119] (II) Initializing built-in extension RENDER
[    18.119] (II) Initializing built-in extension RANDR
[    18.119] (II) Initializing built-in extension COMPOSITE
[    18.119] (II) Initializing built-in extension DAMAGE
[    18.121] (II) Initializing extension GLX
[    18.137] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    18.139] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.139] (II) LoadModule: "evdev"
[    18.139] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.140] (II) Module evdev: vendor="X.Org Foundation"
[    18.140] 	compiled for 1.11.3, module version = 2.7.0
[    18.140] 	Module class: X.Org XInput Driver
[    18.140] 	ABI class: X.Org XInput driver, version 16.0
[    18.140] (II) Using input driver 'evdev' for 'Power Button'
[    18.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.140] (**) Power Button: always reports core events
[    18.140] (**) evdev: Power Button: Device: "/dev/input/event1"
[    18.140] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.140] (--) evdev: Power Button: Found keys
[    18.140] (II) evdev: Power Button: Configuring as keyboard
[    18.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    18.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.140] (**) Option "xkb_rules" "evdev"
[    18.140] (**) Option "xkb_model" "pc105"
[    18.140] (**) Option "xkb_layout" "fr"
[    18.140] (**) Option "xkb_variant" "oss"
[    18.142] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[    18.142] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    18.142] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.142] (II) Using input driver 'evdev' for 'Power Button'
[    18.142] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.142] (**) Power Button: always reports core events
[    18.142] (**) evdev: Power Button: Device: "/dev/input/event0"
[    18.143] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.143] (--) evdev: Power Button: Found keys
[    18.143] (II) evdev: Power Button: Configuring as keyboard
[    18.143] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    18.143] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    18.143] (**) Option "xkb_rules" "evdev"
[    18.143] (**) Option "xkb_model" "pc105"
[    18.143] (**) Option "xkb_layout" "fr"
[    18.143] (**) Option "xkb_variant" "oss"
[    18.143] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[    18.143] (II) No input driver specified, ignoring this device.
[    18.143] (II) This device may have been added with another device file.
[    18.143] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[    18.143] (II) No input driver specified, ignoring this device.
[    18.143] (II) This device may have been added with another device file.
[    18.144] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[    18.144] (II) No input driver specified, ignoring this device.
[    18.144] (II) This device may have been added with another device file.
[    18.144] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4008 (/dev/input/event2)
[    18.144] (**) Logitech Unifying Device. Wireless PID:4008: Applying InputClass "evdev pointer catchall"
[    18.144] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4008'
[    18.144] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.144] (**) Logitech Unifying Device. Wireless PID:4008: always reports core events
[    18.144] (**) evdev: Logitech Unifying Device. Wireless PID:4008: Device: "/dev/input/event2"
[    18.144] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Vendor 0x46d Product 0xc52b
[    18.144] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found 20 mouse buttons
[    18.144] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found scroll wheel(s)
[    18.144] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found relative axes
[    18.144] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found x and y relative axes
[    18.144] (II) evdev: Logitech Unifying Device. Wireless PID:4008: Configuring as mouse
[    18.144] (II) evdev: Logitech Unifying Device. Wireless PID:4008: Adding scrollwheel support
[    18.144] (**) evdev: Logitech Unifying Device. Wireless PID:4008: YAxisMapping: buttons 4 and 5
[    18.144] (**) evdev: Logitech Unifying Device. Wireless PID:4008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.144] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input2/event2"
[    18.144] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4008" (type: MOUSE, id 8)
[    18.144] (II) evdev: Logitech Unifying Device. Wireless PID:4008: initialized for relative axes.
[    18.144] (**) Logitech Unifying Device. Wireless PID:4008: (accel) keeping acceleration scheme 1
[    18.144] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration profile 0
[    18.144] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration factor: 2.000
[    18.144] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration threshold: 4
[    18.145] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4008 (/dev/input/mouse0)
[    18.145] (II) No input driver specified, ignoring this device.
[    18.145] (II) This device may have been added with another device file.
[    18.145] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4003 (/dev/input/event3)
[    18.145] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "evdev keyboard catchall"
[    18.145] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4003'
[    18.145] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.145] (**) Logitech Unifying Device. Wireless PID:4003: always reports core events
[    18.145] (**) evdev: Logitech Unifying Device. Wireless PID:4003: Device: "/dev/input/event3"
[    18.145] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Vendor 0x46d Product 0xc52b
[    18.145] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found 1 mouse buttons
[    18.145] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found scroll wheel(s)
[    18.145] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found relative axes
[    18.145] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing relative x/y axes to exist.
[    18.145] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found absolute axes
[    18.145] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing absolute x/y axes to exist.
[    18.145] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found keys
[    18.145] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as mouse
[    18.145] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as keyboard
[    18.145] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Adding scrollwheel support
[    18.145] (**) evdev: Logitech Unifying Device. Wireless PID:4003: YAxisMapping: buttons 4 and 5
[    18.145] (**) evdev: Logitech Unifying Device. Wireless PID:4003: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.145] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input3/event3"
[    18.145] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4003" (type: KEYBOARD, id 9)
[    18.145] (**) Option "xkb_rules" "evdev"
[    18.145] (**) Option "xkb_model" "pc105"
[    18.145] (**) Option "xkb_layout" "fr"
[    18.145] (**) Option "xkb_variant" "oss"
[    18.145] (II) evdev: Logitech Unifying Device. Wireless PID:4003: initialized for relative axes.
[    18.145] (WW) evdev: Logitech Unifying Device. Wireless PID:4003: ignoring absolute axes.
[    18.146] (**) Logitech Unifying Device. Wireless PID:4003: (accel) keeping acceleration scheme 1
[    18.146] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration profile 0
[    18.146] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration factor: 2.000
[    18.146] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration threshold: 4
[    18.146] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event4)
[    18.146] (II) No input driver specified, ignoring this device.
[    18.146] (II) This device may have been added with another device file.
[    18.146] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event5)
[    18.146] (II) No input driver specified, ignoring this device.
[    18.146] (II) This device may have been added with another device file.
[    18.146] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event6)
[    18.146] (II) No input driver specified, ignoring this device.
[    18.146] (II) This device may have been added with another device file.
[    18.146] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event7)
[    18.146] (II) No input driver specified, ignoring this device.
[    18.146] (II) This device may have been added with another device file.
[    18.147] (II) config/udev: Adding input device HD-Audio Generic Line-Out (/dev/input/event8)
[    18.147] (II) No input driver specified, ignoring this device.
[    18.147] (II) This device may have been added with another device file.
[    18.599] (II) XKB: reuse xkmfile /var/lib/xkb/server-06D88AAF5356C6CF875D73CED515513D3FEA00ED.xkm
[    18.746] (II) NVIDIA(GPU-0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    18.746] (II) NVIDIA(GPU-0):     stereo.
[    18.759] (II) NVIDIA(GPU-0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    18.759] (II) NVIDIA(GPU-0):     stereo.
[    19.229] (II) NVIDIA(GPU-0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    19.230] (II) NVIDIA(GPU-0):     stereo.
[    19.393] (II) NVIDIA(GPU-0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    19.393] (II) NVIDIA(GPU-0):     stereo.
[    19.423] (II) NVIDIA(GPU-0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    19.464] (II) NVIDIA(GPU-0):     stereo.
[    77.634] (II) NVIDIA(0): Setting mode "DPY-2:1920x1080_60+0+0{viewportout=1852x1041+34+19}"
[    77.812] (II) NVIDIA(GPU-0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    77.812] (II) NVIDIA(GPU-0):     stereo.
[    77.832] (II) NVIDIA(GPU-0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision
[    77.832] (II) NVIDIA(GPU-0):     stereo.

Par contre comment trouver le réglage qu'il me semble ne pas avoir ?


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#69 Le 23/09/2014, à 09:17

F50

Re : Je ne récupère jamais ma définition originale au redémarrage .

[    17.898] (II) NVIDIA(0): Display (CON LED TV (DFP-1)) does not support NVIDIA 3D Vision

Tout est dit ici :

[    17.971] (WW) NVIDIA(GPU-0): The EDID for CON LED TV (DFP-1) contradicts itself: mode <<<<<<<< !!!!!!!!!!!
[    17.971] (WW) NVIDIA(GPU-0):     "1920x1080" is specified in the EDID; however, the EDID's
[    17.971] (WW) NVIDIA(GPU-0):     valid VertRefresh range (48.000-62.000 Hz) would exclude
[    17.971] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (33.0 Hz); ignoring VertRefresh
[    17.971] (WW) NVIDIA(GPU-0):     check for mode "1920x1080".

En d'autres termes l'EDID de ton TV semble être pourri, ce que je supposais. Essaye de brancher un moniteur histoire de voir la réaction du système.

#70 Le 23/09/2014, à 11:47

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Je n' ai malheureusement plus de moniteur ... Mince ..Y-a-t-il une solution sinon pour celui ci .. juste pour enregistrer ma config xorg au reboot ! C'est relou ^^


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#71 Le 24/09/2014, à 06:46

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

....


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#72 Le 24/09/2014, à 08:43

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Dés que j'aurais testé sur moniteur , je te donnerais le retour ! En tout cas merci de ton aide ...


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#73 Le 24/09/2014, à 09:16

F50

Re : Je ne récupère jamais ma définition originale au redémarrage .

Tu as essayé de mettre la résolution voulue dans xorg.conf comme dans le lien au #15 ? Oui il faut tester avec un moniteur, les EDID des TV sont des fois à la louche, d'ailleurs, tu vois ce que Xorg.0.log en dit.

#74 Le 24/09/2014, à 12:56

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Je ne sais pas trop ce qu' est l' Edid ! Par contre je ne maitrise pas trop bien mon fichier Xorg , et c'est pour ça que j' ai tant de mal .Serait-il possible que tu me guide par rapport à ma config ? Dans ce cas dis moi ce que je dois te renvoyer pour que tu me guide ! Je ne sais pas comment faire une sauvegarde et encore moins comment la relancer aprés ...(si problème) !


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne

#75 Le 24/09/2014, à 13:02

Cyrustik

Re : Je ne récupère jamais ma définition originale au redémarrage .

Je viens de trouver ça dans mon xorg.conf.nvidia.xconfig-original (etc/X11) :

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 331.20  (buildd@rhenium)  Wed Dec  4 16:24:23 UTC 2013

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CON LED TV"
    HorizSync       14.0 - 68.0
    VertRefresh     48.0 - 62.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 650"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0 {viewportout=1840x1035+40+22}; nvidia-auto-select +0+0 {viewportout=1810x1018+55+30}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Tout en bas , dans la section Screen il y a 2 ligne ("methamodes" nvidia auto-select) qui m' intrigue car elles n' ont pas la même définition ... Le recalibrage défaillant ne viendrait pas de là juste pour info ?

Dernière modification par Cyrustik (Le 24/09/2014, à 13:06)


Processeur AMD A4-4000 Dual core 
Carte EVGA GTX650 SC Nvidia
Carte mère : GA-F2A55M-HD2
4Go de RAM.......Xubuntu 12.04.5 LTS

Hors ligne