Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

PengouinPdt · Le 02/01/2015, à 19:00

Par contre, en modifiant le fichier /etc/bumblebee/bumblebee.conf pour qu'il lance le pilote nouveau, après l'avoir redémarré, j'ai ceci comme messages :

$ sudo service bumblebeed restart
bumblebeed stop/waiting
bumblebeed start/running, process 36328

:/etc/bumblebee$ optirun glxspheres64 
[23245.857957] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[23245.857993] [ERROR]Aborting because fallback start is disabled.

Mon fichier /var/log/Xorg.8.log : http://paste.ubuntu.com/9660315/

Dernière modification par PengouinPdt (Le 02/01/2015, à 19:01)

ArchangeGabriel · Le 02/01/2015, à 19:55

Tu peux mettre ton fichier Xorg.8.log quand ça fonctionne avec NVIDIA, et ton fichier bumblebee.conf quand tu essaies nouveau ? Et aussi, si tu peux jeter un œil du côté de dmesg voir s’il y a des trucs bizarres, c’est bien.

PengouinPdt · Le 02/01/2015, à 20:17

Mon Xorg.8.log avec fonctionnement ok Nvidia : http://paste.ubuntu.com/9660673/

Bumblebee.conf pour nouveau : http://paste.ubuntu.com/9660694/
Je modifie la ligne 'Driver=' en 'Driver=nouveau'. Ce n'est pas bon ?

Dmesg : http://paste.ubuntu.com/9660691/

ArchangeGabriel · Le 02/01/2015, à 20:22

Si c’est bon. Un ls du dossier /etc/modprobe.d ?

Par contre, tu n’utilises pas le driver 331 actuellement, mais le 304.

Du coup, ça me donne a priori un argument contre le premier changement, si tu pouvais retester avec un driver 331 ou supérieur, ce serait intéressant.

PengouinPdt · Le 02/01/2015, à 21:40

Arff, c'est le problème de travailler sur deux laptop différents. Crétin que je suis ...

Je vais upgrader le driver nvidia...

-----

:~$ ls /etc/modprobe.d/
alsa-base.conf               blacklist-watchdog.conf
bbswitch.conf                bumblebee.conf
blacklist-ath_pci.conf       dkms.conf
blacklist.conf               fbdev-blacklist.conf
blacklist-firewire.conf      iwlwifi.conf
blacklist-framebuffer.conf   mlx4.conf
blacklist-modem.conf         nvidia-319-updates_hybrid.conf
blacklist-oss.conf           radeon-kms.conf
blacklist-rare-network.conf  vmwgfx-fbdev.conf

----

Xorg.8.log avec 331 : http://paste.ubuntu.com/9661185/

----

Après, je peux tester avec les versions 340, 343, ou 346 puisque j'ai les dépôts PPA xorg-xedgers ... comme tu veux ?!

Dernière modification par PengouinPdt (Le 02/01/2015, à 21:57)

ArchangeGabriel · Le 03/01/2015, à 03:29

OK, pas besoin de tester un driver plus récent, c’est dans le 331 que cette option a été introduite, et j’ai vu ce que je voulais voir donc. Du coup, ironiquement, c’est sur les machines qui peuvent en avoir besoin que laisser cette option par défaut induit une légère régression, tandis que sur les machines qui n’en ont pas besoin, cela conduit à une légère amélioration. Bref, on va attendre un peu plus de retours là-dessus avant de prendre une décision.

Pour nouveau, ton problème vient du fichier /etc/modprobe.d/nvidia-319-updates_hybrid.conf. Il contient probablement un truc du style alias nouveau off, tu peux supprimer ce fichier sans problème et réessayer nouveau.

F50 · Le 03/01/2015, à 04:12

@ ArchangeGabriel : Ok je saisi pour PRIME & VDPAU. Gaara et d'autres m'avais dit qu'il fallait un dm pour PRIME mais si c'est spécifique à buntu... D'ailleurs, ces deux lignes à ajouter pour starter bumblebee avec Mint m'on permis de résoudre mon souci, comme quoi, tout ne semble pas si clair que ça suivant les différentes install.

Qu'amène ces dernières modifs (diff etc.), la reconnaissance de l'écran par le pilote nvidia ?

ArchangeGabriel · Le 03/01/2015, à 12:49

@fcn50: La première modif’ permet aux gens qui veulent utiliser un écran externe sur un port relié à la carte NVIDIA de ne pas changer leur configuration en permanence. Elle permet de démarrer optirun même si la carte NVIDIA n’a pas d’écran connecté (raison pour laquelle nous avions "UseDisplayDevice" "none"), et de détecter correctement un écran s’il est connecté. Seulement, sur les « vieilles » machines Optimus, comme celle de PenguinPdt, la carte NVIDIA semble détecter plus ou moins la présence de l’écran du portable et tente de le configurer, ce qui ne sert à rien et fait perdre du temps.

La seconde modif, c’est une manière plus propre de désactiver la détection des périphériques d’E/S sur le deuxième serveur X, car il ne servent à rien sur celui-ci et que les configurer fait perdre du temps.

PengouinPdt · Le 03/01/2015, à 14:39

ArchangeGabriel a écrit :

(...)
Pour nouveau, ton problème vient du fichier /etc/modprobe.d/nvidia-319-updates_hybrid.conf. Il contient probablement un truc du style alias nouveau off, tu peux supprimer ce fichier sans problème et réessayer nouveau.

Malheureusement, non !

Fichier nvidia-319-updates_hybrid.conf supprimé !

:~$ ll /etc/modprobe.d/
total 80
drwxr-xr-x   2 root root  4096 janv.  3 13:35 ./
drwxr-xr-x 171 root root 12288 janv.  3 13:32 ../
-rw-r--r--   1 root root  2507 févr. 13  2013 alsa-base.conf
-rw-r--r--   1 root root    46 sept. 15  2013 bbswitch.conf
-rw-r--r--   1 root root   325 avril 18  2013 blacklist-ath_pci.conf
-rw-r--r--   1 root root  1603 avril 18  2013 blacklist.conf
-rw-r--r--   1 root root   210 avril 18  2013 blacklist-firewire.conf
-rw-r--r--   1 root root   677 avril 18  2013 blacklist-framebuffer.conf
-rw-r--r--   1 root root   156 févr. 13  2013 blacklist-modem.conf
lrwxrwxrwx   1 root root    41 sept. 15  2013 blacklist-oss.conf -> /lib/linux-sound-base/noOSS.modprobe.conf
-rw-r--r--   1 root root   583 avril 18  2013 blacklist-rare-network.conf
-rw-r--r--   1 root root  1077 avril 18  2013 blacklist-watchdog.conf
-rw-r--r--   1 root root  1069 août  12 11:27 bumblebee.conf
-rw-r--r--   1 root root   127 oct.  31  2012 dkms.conf
-rw-r--r--   1 root root   456 nov.  18 16:38 fbdev-blacklist.conf
-rw-r--r--   1 root root   347 avril 18  2013 iwlwifi.conf
-rw-r--r--   1 root root   104 avril 18  2013 mlx4.conf
-rw-r--r--   1 root root    26 août  16  2013 radeon-kms.conf
-rw-r--r--   1 root root    30 août   2  2012 vmwgfx-fbdev.conf

:~$ optirun glxspheres64 
[  405.119140] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NOUVEAU(0): [drm] failed to set drm interface version.

[  405.119184] [ERROR]Aborting because fallback start is disabled.

Fichier Xorg.8.log : http://paste.ubuntu.com/9664785/

----

Maintenant, est-ce que ce n'est tout simplement pas parce que ma CG - reconnue comme NVIDIA GPU GeForce GT 525M (GF108) - ne serait pas supportée par le driver nouveau.

En effet, si j'en crois ce que le fichier Xorg ci-dessus restitue :

[ 404.998] (II) NOUVEAU driver
[ 404.998] (II) NOUVEAU driver for NVIDIA chipset families :
[ 404.998] RIVA TNT (NV04)
[ 404.998] RIVA TNT2 (NV05)
[ 404.998] GeForce 256 (NV10)
[ 404.998] GeForce 2 (NV11, NV15)
[ 404.998] GeForce 4MX (NV17, NV18)
[ 404.998] GeForce 3 (NV20)
[ 404.998] GeForce 4Ti (NV25, NV28)
[ 404.998] GeForce FX (NV3x)
[ 404.998] GeForce 6 (NV4x)
[ 404.998] GeForce 7 (G7x)
[ 404.998] GeForce 8 (G8x)
[ 404.998] GeForce GTX 200 (NVA0)
[ 404.998] GeForce GTX 400 (NVC0)
[ 404.998] (--) using VT number 8

Non ?!

Dernière modification par PengouinPdt (Le 03/01/2015, à 14:43)

PengouinPdt · Le 03/01/2015, à 14:55

Grrr ...
Maintenant, j'ai beau remettre le fichier bumblebee.conf, sans implémentation de l'option Driver ... il démarre sur nouveau quand même.
Si je mets "Driver=nvidia", il démarre sur nouveau !
Si je change "Kernel=nvidia-current" par "Kernel=nvidia-331-updates", toujours avec l'option "Driver=nvidia", il démarre toujours sur nouveau ?!

Une idée ?

----

J'aurais dû sauvegarder le fichier avant de le supprimer ... Grrr !

Quelqu'un pour me restituer le contenu, svp !?

Dernière modification par PengouinPdt (Le 03/01/2015, à 14:58)

F50 · Le 03/01/2015, à 15:53

J'ai pas de /etc/bumblebee/xorg.conf.d/10-dummy.conf mais voici mon hybrid.conf :

# This file was installed by nvidia-331
# Do not edit this file manually

blacklist nouveau
blacklist lbm-nouveau
alias nouveau off
alias lbm-nouveau off

ArchangeGabriel · Le 03/01/2015, à 16:45

@PenguinPdt: Il faudrait le contenu de dmesg correspondant (il y a un grand progrès tout de même, il utilise nouveau quand tu lui demandes, et plus nvidia). Et pour nouveau, dans /etc/modprobe.d, ceux des fichiers bbswitch.conf, bumblebee.conf et dkms.conf. Tu as essayé de redémarrer aussi ?

PengouinPdt · Le 03/01/2015, à 17:20

dmesg : http://paste.ubuntu.com/9665529/

Concernant les fichiers que tu me demandes :

$ cat /etc/modprobe.d/bbswitch.conf 
options bbswitch load_state=0 unload_state=0

:/etc/bumblebee$ cat /etc/modprobe.d/bumblebee.conf 
# installed by bumblebee-nvidia

# do not automatically load nouveau as it may prevent nvidia from loading
blacklist nouveau
# do not automatically load nvidia as it's unloaded anyway when bumblebeed
# starts and may fail bumblebeed to disable the card in a race condition.
blacklist nvidia
blacklist nvidia-current
blacklist nvidia-current-updates
# 304
blacklist nvidia-304
blacklist nvidia-304-updates
blacklist nvidia-experimental-304
# 310
blacklist nvidia-310
blacklist nvidia-310-updates
blacklist nvidia-experimental-310
# 313
blacklist nvidia-313
blacklist nvidia-313-updates
blacklist nvidia-experimental-313
# 319
blacklist nvidia-319
blacklist nvidia-319-updates
blacklist nvidia-experimental-319
# 325
blacklist nvidia-325
blacklist nvidia-325-updates
blacklist nvidia-experimental-325
# 331
blacklist nvidia-331
blacklist nvidia-331-updates
blacklist nvidia-experimental-331
# 340
blacklist nvidia-340
blacklist nvidia-340-updates
blacklist nvidia-experimental-340
# 343
blacklist nvidia-343
blacklist nvidia-343-updates
blacklist nvidia-experimental-343

:/etc/bumblebee$ cat /etc/modprobe.d/dkms.conf 
# modprobe information used for DKMS modules
#
# This is a stub file, should be edited when needed,
# used by default by DKMS.

Non, je n'ai pas redémarré depuis ce matin, après les modifications de nouveau.
Mais, bon je vais le faire - bien que je ne croies pas que cela change grand chose !
Allez, zou ...

----

Eh, beh, ça fonctionne correctement après le reboot ...
J'en perds mon latin !
Et, je n'ai même pas récrit le fichier "hybrid.conf" ...
Une explication ?

Dernière modification par PengouinPdt (Le 03/01/2015, à 17:29)

ArchangeGabriel · Le 03/01/2015, à 20:46

Euh il y a que ma dans le dmesg ? T’as pas sinon un /var/log/kern.log ? J’ai besoin de voir la partie où nouveau a été testé.

Explication : dans certains cas, nouveau refuse de rendre la main, et après impossible de démarrer nvidia vu que nouveau est déjà là. Après reboot, plus de nouveau puisqu’il ne démarre pas automatiquement, donc nvidia peut fonctionner.

PengouinPdt · Le 03/01/2015, à 23:44

ArchangeGabriel a écrit :

Euh il y a que ma dans le dmesg ? T’as pas sinon un /var/log/kern.log ? J’ai besoin de voir la partie où nouveau a été testé.
.

Je te fournis cela dès que je peux.

ArchangeGabriel a écrit :

Explication : dans certains cas, nouveau refuse de rendre la main, et après impossible de démarrer nvidia vu que nouveau est déjà là. Après reboot, plus de nouveau puisqu’il ne démarre pas automatiquement, donc nvidia peut fonctionner.

Un moyen de le décharger ? le killer ?

Alcatorda · Le 15/01/2015, à 12:03

Bonjour à tous,

J'ai fait l'erreur ( :D ) d'acheter il y a quelques jours un HP Pavilion 17-xxxx. Core I7, GeForce 840M. Mal m'en a pris, car je suis depuis confronté aux problèmes posés par Optimus, ayant voulu y installer une Mint 17.1. :D
Après m'être longuement renseigné sur cette technologie, avoir lu de nombreux sujets à ce propos, celui-ci entre autres, j'ai procédé à l'installation de Bumblebee en suivant le tuto de la documentation Ubuntu-fr.

J'ai commencé par Primus en lieu et place de VirtualGL, ce dernier n'étant pas disponible dans les dépôts.
Sans succès.

J'ai changé la version du pilote NVIDIA, j'ai trifouillé dans les fichiers de configuration selon les conseils que je lisais dans la doc ou sur ce fil de discussion.
Puis via le dépôt bumblebee/stable, je suis passé à VirtualGL.
Sans succès.

Re-test de plusieurs pilotes, du 309 au 340, en passant par le 331.
Enlevé, puis remis, les lignes particulières à Mint dont il est fait mention en fin de doc.
Re-bidouillé les fichiers de configuration…
Rien n'y fait.

Dans tous les cas, quoi que je fasse, au moment de lancer mon

optirun glxgears

ou

optirun -b primus glxgears

Je suis inévitablement confronté au même message d'erreur :

[ 2501.935694] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) 

[ 2501.935774] [ERROR]Aborting because fallback start is disabled.

Seuls les nombres en début de ligne changent.
Sans doute suis-je passé à côté de quelque chose.

C'est pourquoi je me tourne vers vous. Je peux continuer sur ma lancée ou réinstaller ma Mint pour repartir sur une base propre selon vos conseils.

D'avance merci pour votre aide,
Alcatorda.

ArchangeGabriel · Le 15/01/2015, à 15:29

@PenguinPdt : Désolé, je n’avais pas vu ton message. J’attends toujours un log, et pour ce qui est de le décharger, ça dépend pourquoi il bloque. Tu peux essayer un "sudo modprobe -r nouveau".

@Alcatorda : Il nous faut le contenu de dmesg pour t’aider.

Alcatorda · Le 16/01/2015, à 08:27

C'est sympa de prendre le temps de fouiller là-dedans. :)

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=5db35289-3a5f-428d-b854-33f80bf48f53 ro quiet splash rcutree.rcu_idle_gp_delay=1 vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c8aefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c8af000-0x000000009ceaefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ceaf000-0x000000009cfaefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfaf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion 17 Notebook PC /2282, BIOS F.11 08/07/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00FFC00000 mask 7FFFC00000 write-protect
[    0.000000]   5 base 0100000000 mask 7F00000000 write-back
[    0.000000]   6 base 01DF600000 mask 7FFFE00000 uncachable
[    0.000000]   7 base 01DF800000 mask 7FFF800000 uncachable
[    0.000000]   8 base 01E0000000 mask 7FE0000000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1df400000-0x1df5fffff]
[    0.000000]  [mem 0x1df400000-0x1df5fffff] page 2M
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1dc000000-0x1df3fffff]
[    0.000000]  [mem 0x1dc000000-0x1df3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1dbffffff]
[    0.000000]  [mem 0x180000000-0x1bfffffff] page 1G
[    0.000000]  [mem 0x1c0000000-0x1dbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x9c8aefff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0x9c7fffff] page 2M
[    0.000000]  [mem 0x9c800000-0x9c8aefff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[    0.000000]  [mem 0x9cfff000-0x9cffffff] page 4k
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x348ae000-0x3644efff]
[    0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000009cffe210 0000BC (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.000000] ACPI: FACP 000000009cff8000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
[    0.000000] ACPI: DSDT 000000009cfe3000 011187 (v01 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 000000009cfaa000 000040
[    0.000000] ACPI: UEFI 000000009cffd000 000236 (v01 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: FPDT 000000009cffb000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: MSDM 000000009cffa000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: ASF! 000000009cff9000 0000A5 (v32 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: HPET 000000009cff7000 000038 (v01 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: APIC 000000009cff6000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: MCFG 000000009cff5000 00003C (v01 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 000000009cfe1000 0010BF (v01 HPQOEM 2282     00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 000000009cfdf000 000028 (v01 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: LPIT 000000009cfde000 000094 (v01 HPQOEM 2282     00000000 HP   00040000)
[    0.000000] ACPI: ASPT 000000009cfdc000 000034 (v07 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: DBGP 000000009cfdb000 000034 (v01 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 000000009cfda000 000539 (v01 HPQOEM 2282     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009cfd9000 000AD8 (v01 HPQOEM 2282     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009cfd5000 0034C1 (v01 HPQOEM 2282     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009cfce000 003625 (v01 HPQOEM 2282     00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009cfd4000 000405 (v01 HPQOEM 2282     00001000 ACPI 00040000)
[    0.000000] ACPI: CSRT 000000009cfd2000 0000C4 (v01 HPQOEM 2282     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
[    0.000000]   NODE_DATA [mem 0x1df5f9000-0x1df5fdfff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1df5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x9c8aefff]
[    0.000000]   node   0: [mem 0x9cfff000-0x9cffffff]
[    0.000000]   node   0: [mem 0x100000000-0x1df5fffff]
[    0.000000] On node 0 totalpages: 1556044
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9955 pages used for memmap
[    0.000000]   DMA32 zone: 637104 pages, LIFO batch:31
[    0.000000]   Normal zone: 14296 pages used for memmap
[    0.000000]   Normal zone: 914944 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 56
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c8af000-0x9ceaefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ceaf000-0x9cfaefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfaf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801df200000 s86400 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1531708
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=5db35289-3a5f-428d-b854-33f80bf48f53 ro quiet splash rcutree.rcu_idle_gp_delay=1 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6013948K/6224176K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 210228K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:1016 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2593.850 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.70 BogoMIPS (lpj=10375400)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000035] Security Framework initialized
[    0.000055] AppArmor: AppArmor initialized
[    0.000056] Yama: becoming mindful.
[    0.000690] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002562] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003341] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.003353] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.003572] Initializing cgroup subsys memory
[    0.003577] Initializing cgroup subsys devices
[    0.003579] Initializing cgroup subsys freezer
[    0.003581] Initializing cgroup subsys blkio
[    0.003582] Initializing cgroup subsys perf_event
[    0.003585] Initializing cgroup subsys hugetlb
[    0.003608] CPU: Physical Processor ID: 0
[    0.003609] CPU: Processor Core ID: 0
[    0.003613] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003613] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004709] mce: CPU supports 7 MCE banks
[    0.004723] CPU0: Thermal monitoring enabled (TM1)
[    0.004735] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.004735] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.004735] tlb_flushall_shift: 6
[    0.004857] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.005987] ACPI: Core revision 20131115
[    0.016951] ACPI: All ACPI Tables successfully acquired
[    0.018585] ftrace: allocating 28541 entries in 112 pages
[    0.033296] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073005] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
[    0.073011] TSC deadline timer enabled
[    0.073020] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.073027] ... version:                3
[    0.073028] ... bit width:              48
[    0.073029] ... generic registers:      4
[    0.073030] ... value mask:             0000ffffffffffff
[    0.073031] ... max period:             0000ffffffffffff
[    0.073032] ... fixed-purpose events:   3
[    0.073033] ... event mask:             000000070000000f
[    0.074779] x86: Booting SMP configuration:
[    0.089270] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.074781] .... node  #0, CPUs:      #1 #2 #3
[    0.117916] x86: Booted up 1 node, 4 CPUs
[    0.117919] smpboot: Total of 4 processors activated (20750.80 BogoMIPS)
[    0.562159] devtmpfs: initialized
[    0.564300] EVM: security.selinux
[    0.564302] EVM: security.SMACK64
[    0.564303] EVM: security.ima
[    0.564304] EVM: security.capability
[    0.564351] PM: Registering ACPI NVS region [mem 0x9ceaf000-0x9cfaefff] (1048576 bytes)
[    0.565152] pinctrl core: initialized pinctrl subsystem
[    0.565207] regulator-dummy: no parameters
[    0.565238] RTC time:  6:21:50, date: 01/16/15
[    0.565271] NET: Registered protocol family 16
[    0.565371] cpuidle: using governor ladder
[    0.565372] cpuidle: using governor menu
[    0.565414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.565415] ACPI: bus type PCI registered
[    0.565417] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.565474] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.565476] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.587680] PCI: Using configuration type 1 for base access
[    0.587848] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.587849] mtrr: probably your BIOS does not setup all CPUs.
[    0.587850] mtrr: corrected configuration.
[    0.588591] bio: create slab <bio-0> at 0
[    0.588739] ACPI: Added _OSI(Module Device)
[    0.588741] ACPI: Added _OSI(Processor Device)
[    0.588742] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.588743] ACPI: Added _OSI(Processor Aggregator Device)
[    0.592813] ACPI: Executed 1 blocks of module-level executable AML code
[    0.599145] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.600397] ACPI: SSDT 000000009ce6fc18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20121018)
[    0.600919] ACPI: Dynamic OEM Table Load:
[    0.600921] ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20121018)
[    0.602266] ACPI: SSDT 000000009ce6f618 0005AA (v01  PmRef    ApIst 00003000 INTL 20121018)
[    0.602857] ACPI: Dynamic OEM Table Load:
[    0.602859] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20121018)
[    0.606122] ACPI: SSDT 000000009ce6ed98 000119 (v01  PmRef    ApCst 00003000 INTL 20121018)
[    0.606639] ACPI: Dynamic OEM Table Load:
[    0.606641] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20121018)
[    0.823015] ACPI: Interpreter enabled
[    0.823025] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.823032] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.823052] ACPI: (supports S0 S3 S4 S5)
[    0.823054] ACPI: Using IOAPIC for interrupt routing
[    0.823086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.823240] ACPI: No dock devices found.
[    0.842442] ACPI: Power Resource [NVP3] (on)
[    0.842466] ACPI: Power Resource [NVP2] (on)
[    0.852054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.852060] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.852137] \_SB_.PCI0:_OSC invalid UUID
[    0.852138] _OSC request data:1 1f 0 
[    0.852142] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.852829] PCI host bridge to bus 0000:00
[    0.852832] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.852834] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.852836] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.852838] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.852840] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[    0.852848] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.852974] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.852987] pci 0000:00:02.0: reg 0x10: [mem 0xb5000000-0xb53fffff 64bit]
[    0.852995] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.853000] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.853119] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.853128] pci 0000:00:03.0: reg 0x10: [mem 0xb5610000-0xb5613fff 64bit]
[    0.853273] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.853291] pci 0000:00:14.0: reg 0x10: [mem 0xb5600000-0xb560ffff 64bit]
[    0.853348] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.853427] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.853456] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.853477] pci 0000:00:16.0: reg 0x10: [mem 0xb5618000-0xb561801f 64bit]
[    0.853544] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.853658] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.853671] pci 0000:00:1b.0: reg 0x10: [mem 0xb5614000-0xb5617fff 64bit]
[    0.853732] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.853834] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[    0.853895] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.853979] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.854004] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
[    0.854065] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.854148] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.854174] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[    0.854236] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.854318] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.854342] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.854408] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.854492] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.854518] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[    0.854579] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.854672] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.854705] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.854913] pci 0000:00:1d.0: reg 0x10: [mem 0xb561c000-0xb561c3ff]
[    0.856087] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.856182] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.856215] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.856424] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.856439] pci 0000:00:1f.2: reg 0x10: [io  0x6088-0x608f]
[    0.856446] pci 0000:00:1f.2: reg 0x14: [io  0x6094-0x6097]
[    0.856452] pci 0000:00:1f.2: reg 0x18: [io  0x6080-0x6087]
[    0.856459] pci 0000:00:1f.2: reg 0x1c: [io  0x6090-0x6093]
[    0.856466] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.856473] pci 0000:00:1f.2: reg 0x24: [mem 0xb561b000-0xb561b7ff]
[    0.856509] pci 0000:00:1f.2: PME# supported from D3hot
[    0.856617] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.856631] pci 0000:00:1f.3: reg 0x10: [mem 0xb5619000-0xb56190ff 64bit]
[    0.856651] pci 0000:00:1f.3: reg 0x20: [io  0x6040-0x605f]
[    0.856807] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.856873] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[    0.856877] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.856880] pci 0000:00:1c.1:   bridge window [mem 0xb4000000-0xb4ffffff]
[    0.856886] pci 0000:00:1c.1:   bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
[    0.856974] pci 0000:08:00.0: [14e4:4365] type 00 class 0x028000
[    0.857005] pci 0000:08:00.0: reg 0x10: [mem 0xb5500000-0xb5507fff 64bit]
[    0.857170] pci 0000:08:00.0: supports D1 D2
[    0.857172] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.862412] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.862417] pci 0000:00:1c.2:   bridge window [mem 0xb5500000-0xb55fffff]
[    0.862492] pci 0000:09:00.0: [10ec:8136] type 00 class 0x020000
[    0.862509] pci 0000:09:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.862537] pci 0000:09:00.0: reg 0x18: [mem 0xb5404000-0xb5404fff 64bit]
[    0.862555] pci 0000:09:00.0: reg 0x20: [mem 0xb5400000-0xb5403fff 64bit]
[    0.862629] pci 0000:09:00.0: supports D1 D2
[    0.862631] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.862680] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.870400] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.870403] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.870406] pci 0000:00:1c.3:   bridge window [mem 0xb5400000-0xb54fffff]
[    0.870482] pci 0000:0a:00.0: [10de:1341] type 00 class 0x030200
[    0.870501] pci 0000:0a:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
[    0.870520] pci 0000:0a:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.870538] pci 0000:0a:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.870551] pci 0000:0a:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.870563] pci 0000:0a:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.878408] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[    0.878411] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.878415] pci 0000:00:1c.4:   bridge window [mem 0xb3000000-0xb3ffffff]
[    0.878419] pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.879180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.879229] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.879277] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.879327] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.879372] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.879418] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.879463] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.879508] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.879968] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.879976] ACPI: \_SB_.PCI0: notify handler is installed
[    0.880030] Found 1 acpi root devices
[    0.880077] ACPI : EC: GPE = 0x8, I/O: command/status = 0x66, data = 0x62
[    0.880162] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.880165] vgaarb: loaded
[    0.880167] vgaarb: bridge control possible 0000:00:02.0
[    0.880311] SCSI subsystem initialized
[    0.880353] libata version 3.00 loaded.
[    0.880372] ACPI: bus type USB registered
[    0.880386] usbcore: registered new interface driver usbfs
[    0.880393] usbcore: registered new interface driver hub
[    0.880412] usbcore: registered new device driver usb
[    0.880509] PCI: Using ACPI for IRQ routing
[    0.885997] PCI: pci_cache_line_size set to 64 bytes
[    0.886061] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.886063] e820: reserve RAM buffer [mem 0x9c8af000-0x9fffffff]
[    0.886065] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.886066] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[    0.886139] NetLabel: Initializing
[    0.886140] NetLabel:  domain hash size = 128
[    0.886141] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.886153] NetLabel:  unlabeled traffic allowed by default
[    0.886201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.886207] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.888239] Switched to clocksource hpet
[    0.892734] AppArmor: AppArmor Filesystem Enabled
[    0.892756] pnp: PnP ACPI init
[    0.892768] ACPI: bus type PNP registered
[    0.893177] pnp 00:00: [dma 4]
[    0.893197] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.893216] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.893311] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.893372] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.893375] system 00:03: [io  0xffff] has been reserved
[    0.893376] system 00:03: [io  0xffff] has been reserved
[    0.893378] system 00:03: [io  0xffff] has been reserved
[    0.893382] system 00:03: [io  0x1800-0x18fe] could not be reserved
[    0.893383] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.893385] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.893387] system 00:03: [io  0x0380-0x0387] has been reserved
[    0.893390] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.893429] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.893459] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.893489] pnp 00:06: Plug and Play ACPI device, IDs SYN1ec0 SYN1e00 SYN0002 PNP0f13 (active)
[    0.893526] pnp 00:07: Plug and Play ACPI device, IDs HPQ6007 (active)
[    0.893800] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.893803] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.893805] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.893807] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.893809] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.893810] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.893812] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.893814] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.893816] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.893818] system 00:08: [mem 0x9fa20000-0x9fa20fff] has been reserved
[    0.893820] system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[    0.893822] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.894139] pnp: PnP ACPI: found 9 devices
[    0.894140] ACPI: bus type PNP unregistered
[    0.900089] pci 0000:0a:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.900123] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.900133] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[    0.900136] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.900140] pci 0000:00:1c.1:   bridge window [mem 0xb4000000-0xb4ffffff]
[    0.900143] pci 0000:00:1c.1:   bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
[    0.900149] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.900153] pci 0000:00:1c.2:   bridge window [mem 0xb5500000-0xb55fffff]
[    0.900160] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.900162] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.900166] pci 0000:00:1c.3:   bridge window [mem 0xb5400000-0xb54fffff]
[    0.900175] pci 0000:0a:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    0.900177] pci 0000:00:1c.4: PCI bridge to [bus 0a]
[    0.900179] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.900183] pci 0000:00:1c.4:   bridge window [mem 0xb3000000-0xb3ffffff]
[    0.900187] pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.900193] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.900195] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.900197] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.900198] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    0.900200] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.900202] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb4ffffff]
[    0.900204] pci_bus 0000:02: resource 2 [mem 0xb2000000-0xb2ffffff 64bit pref]
[    0.900205] pci_bus 0000:08: resource 1 [mem 0xb5500000-0xb55fffff]
[    0.900207] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.900209] pci_bus 0000:09: resource 1 [mem 0xb5400000-0xb54fffff]
[    0.900211] pci_bus 0000:0a: resource 0 [io  0x3000-0x3fff]
[    0.900212] pci_bus 0000:0a: resource 1 [mem 0xb3000000-0xb3ffffff]
[    0.900214] pci_bus 0000:0a: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.900248] NET: Registered protocol family 2
[    0.900464] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.900621] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.900752] TCP: Hash tables configured (established 65536 bind 65536)
[    0.900769] TCP: reno registered
[    0.900780] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.900810] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.900877] NET: Registered protocol family 1
[    0.900888] pci 0000:00:02.0: Boot video device
[    0.916393] PCI: CLS 64 bytes, default 64
[    0.916445] Trying to unpack rootfs image as initramfs...
[    1.435339] Freeing initrd memory: 28292K (ffff8800348ae000 - ffff88003644f000)
[    1.435344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.435347] software IO TLB [mem 0x988af000-0x9c8af000] (64MB) mapped at [ffff8800988af000-ffff88009c8aefff]
[    1.435411] Simple Boot Flag at 0x44 set to 0x1
[    1.435599] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[    1.435605] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[    1.435609] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[    1.435617] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[    1.435666] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.435668] Scanning for low memory corruption every 60 seconds
[    1.435905] Initialise system trusted keyring
[    1.435948] audit: initializing netlink socket (disabled)
[    1.435960] type=2000 audit(1421389309.984:1): initialized
[    1.466518] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.467500] zbud: loaded
[    1.467641] VFS: Disk quotas dquot_6.5.2
[    1.467678] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.468051] fuse init (API version 7.22)
[    1.468112] msgmni has been set to 11801
[    1.468162] Key type big_key registered
[    1.468482] Key type asymmetric registered
[    1.468484] Asymmetric key parser 'x509' registered
[    1.468512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.468542] io scheduler noop registered
[    1.468544] io scheduler deadline registered (default)
[    1.468565] io scheduler cfq registered
[    1.469176] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.469189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.469224] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    1.469225] vesafb: scrolling: redraw
[    1.469227] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.469734] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010f00000, using 5632k, total 5632k
[    1.611794] Console: switching to colour frame buffer device 200x56
[    1.753505] fb0: VESA VGA frame buffer device
[    1.753520] intel_idle: MWAIT substates: 0x11142120
[    1.753521] intel_idle: v0.4 model 0x45
[    1.753522] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.753651] ipmi message handler version 39.2
[    1.754533] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.754697] ACPI: AC Adapter [ADP1] (off-line)
[    1.754768] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.755238] ACPI: Lid Switch [LID0]
[    1.755270] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.755273] ACPI: Power Button [PWRB]
[    1.755299] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.755301] ACPI: Power Button [PWRF]
[    1.756262] [Firmware Bug]: Invalid critical threshold (0)
[    1.758128] thermal LNXTHERM:00: registered as thermal_zone0
[    1.758130] ACPI: Thermal Zone [TZ01] (43 C)
[    1.758150] GHES: HEST is not enabled!
[    1.758223] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.760862] Linux agpgart interface v0.103
[    1.761993] brd: module loaded
[    1.762568] loop: module loaded
[    1.762871] libphy: Fixed MDIO Bus: probed
[    1.762947] tun: Universal TUN/TAP device driver, 1.6
[    1.762948] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.762985] PPP generic driver version 2.4.2
[    1.763024] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.763028] ehci-pci: EHCI PCI platform driver
[    1.763141] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.763146] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.763158] ehci-pci 0000:00:1d.0: debug port 2
[    1.767080] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.767095] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb561c000
[    1.776792] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.776829] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.776831] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.776832] usb usb1: Product: EHCI Host Controller
[    1.776834] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    1.776835] usb usb1: SerialNumber: 0000:00:1d.0
[    1.776932] hub 1-0:1.0: USB hub found
[    1.776937] hub 1-0:1.0: 2 ports detected
[    1.777036] ehci-platform: EHCI generic platform driver
[    1.777042] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.777044] ohci-pci: OHCI PCI platform driver
[    1.777052] ohci-platform: OHCI generic platform driver
[    1.777057] uhci_hcd: USB Universal Host Controller Interface driver
[    1.777165] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.777169] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.777246] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.777263] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[    1.777318] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.777320] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.777322] usb usb2: Product: xHCI Host Controller
[    1.777323] usb usb2: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    1.777325] usb usb2: SerialNumber: 0000:00:14.0
[    1.777415] hub 2-0:1.0: USB hub found
[    1.777425] hub 2-0:1.0: 9 ports detected
[    1.778119] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.778122] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.778153] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.778154] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.778156] usb usb3: Product: xHCI Host Controller
[    1.778157] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    1.778159] usb usb3: SerialNumber: 0000:00:14.0
[    1.778247] hub 3-0:1.0: USB hub found
[    1.778254] hub 3-0:1.0: 4 ports detected
[    1.784866] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.792004] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.792008] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.792109] mousedev: PS/2 mouse device common for all mice
[    1.792247] rtc_cmos 00:04: RTC can wake from S4
[    1.792368] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.792395] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.792450] device-mapper: uevent: version 1.0.3
[    1.792510] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.792516] ledtrig-cpu: registered to indicate activity on CPUs
[    1.792604] TCP: cubic registered
[    1.792679] NET: Registered protocol family 10
[    1.792842] NET: Registered protocol family 17
[    1.792849] Key type dns_resolver registered
[    1.793063] Loading compiled-in X.509 certificates
[    1.793987] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    1.793999] registered taskstats version 1
[    1.796103] Key type trusted registered
[    1.797776] Key type encrypted registered
[    1.799369] AppArmor: AppArmor sha1 policy hashing enabled
[    1.799373] IMA: No TPM chip found, activating TPM-bypass!
[    1.799848] regulator-dummy: disabling
[    1.799912]   Magic number: 15:626:367
[    1.799992] rtc_cmos 00:04: setting system clock to 2015-01-16 06:21:51 UTC (1421389311)
[    1.800709] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.800711] EDD information not available.
[    1.800740] PM: Hibernation image not present or could not be loaded.
[    1.857846] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.857853] ACPI: Battery Slot [BAT0] (battery present)
[    1.858671] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.858673] Write protecting the kernel read-only data: 12288k
[    1.860488] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    1.861663] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    1.870305] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.874169] systemd-udevd[125]: starting version 204
[    1.885849] wmi: Mapper loaded
[    1.890515] [drm] Initialized drm 1.1.0 20060810
[    1.892886] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.892897] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.893822] ahci 0000:00:1f.2: version 3.0
[    1.893940] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[    1.901298] r8169 0000:09:00.0: irq 58 for MSI/MSI-X
[    1.901472] r8169 0000:09:00.0 eth0: RTL8106e at 0xffffc90010c82000, 38:63:bb:a6:6a:28, XID 10900800 IRQ 58
[    1.908889] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.908895] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.909844] scsi0 : ahci
[    1.910897] scsi1 : ahci
[    1.912440] scsi2 : ahci
[    1.913434] scsi3 : ahci
[    1.913486] ata1: SATA max UDMA/133 abar m2048@0xb561b000 port 0xb561b100 irq 57
[    1.913489] ata2: SATA max UDMA/133 abar m2048@0xb561b000 port 0xb561b180 irq 57
[    1.913490] ata3: DUMMY
[    1.913492] ata4: DUMMY
[    1.914351] [drm] Memory usable by graphics device = 2048M
[    1.914355] checking generic (c0000000 580000) vs hw (c0000000 10000000)
[    1.914357] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.914371] Console: switching to colour dummy device 80x25
[    1.953019] i915 0000:00:02.0: irq 59 for MSI/MSI-X
[    1.953034] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.953036] [drm] Driver supports precise vblank timestamp query.
[    1.953154] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.031157] fbcon: inteldrmfb (fb0) is primary device
[    2.089095] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.221455] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    2.221457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.221718] hub 1-1:1.0: USB hub found
[    2.221797] hub 1-1:1.0: 8 ports detected
[    2.233108] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.233122] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.234605] ata1.00: ATA-9: HGST HTS541075A9E680, JA2OA710, max UDMA/133
[    2.234607] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.237606] ata2.00: ATAPI: hp      DVDRW  DU8A5SHL, ZH63, max UDMA/100
[    2.238423] ata2.00: configured for UDMA/100
[    2.268029] ata1.00: configured for UDMA/133
[    2.268156] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541075A9 JA2O PQ: 0 ANSI: 5
[    2.268257] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.268259] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.268283] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.268294] sd 0:0:0:0: [sda] Write Protect is off
[    2.268295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.268321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.273187] scsi 1:0:0:0: CD-ROM            hp       DVDRW  DU8A5SHL  ZH63 PQ: 0 ANSI: 5
[    2.282049] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.282050] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.282193] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.282251] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.331350]  sda: sda1 sda2 sda3
[    2.331737] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.433247] tsc: Refined TSC clocksource calibration: 2593.995 MHz
[    2.493386] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.595674] usb 1-1.3: New USB device found, idVendor=064e, idProduct=c344
[    2.595675] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.595677] usb 1-1.3: Product: HP Truevision HD
[    2.595677] usb 1-1.3: Manufacturer: SuYin
[    2.595678] usb 1-1.3: SerialNumber: HF1017-P83A-OV01-REV0102
[    2.665479] usb 1-1.7: new full-speed USB device number 4 using ehci-pci
[    2.761001] usb 1-1.7: New USB device found, idVendor=0a5c, idProduct=216c
[    2.761002] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.761003] usb 1-1.7: Product: BCM43142A0
[    2.761004] usb 1-1.7: Manufacturer: Broadcom Corp
[    2.761005] usb 1-1.7: SerialNumber: 38B1DBF18DDE
[    2.801407] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800, board id: 2997, fw id: 1665536
[    2.850171] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    3.265874] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.433988] Switched to clocksource tsc
[    3.725999] Console: switching to colour frame buffer device 200x56
[    3.731004] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.731005] i915 0000:00:02.0: registered panic notifier
[    3.731380] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.731699] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.731797] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    3.731802] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff8801d60ffe38), AE_NOT_FOUND (20131115/psparse-536)
[    3.731857] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/LNXVIDEO:00/input/input6
[    3.739381] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.739711] acpi device:40: registered as cooling_device4
[    3.739776] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    3.739854] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.941569] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.291340] random: nonblocking pool is initialized
[   13.526756] Adding 7812092k swap on /dev/sda2.  Priority:-1 extents:1 across:7812092k FS
[   13.560395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.664705] systemd-udevd[378]: starting version 204
[   13.733430] lp: driver loaded but no devices found
[   13.737159] ppdev: user-space parallel port driver
[   13.749504] Initializing HPQ6001 module
[   13.749592] input: HP Wireless hotkeys as /devices/virtual/input/input8
[   13.754956] hp_accel: laptop model unknown, using default axes configuration
[   13.764747] lis3lv02d: 8 bits 3DC sensor found
[   13.777528] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[   13.788083] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   13.788090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.788094] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   13.788097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.788099] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   13.788102] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 2 (20131115/utaddress-251)
[   13.788106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.788107] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.789322] cfg80211: Calling CRDA to update world regulatory domain
[   13.791163] lib80211: common routines for IEEE802.11 drivers
[   13.791166] lib80211_crypt: registered algorithm 'NULL'
[   13.792638] wl: module license 'MIXED/Proprietary' taints kernel.
[   13.792643] Disabling lock debugging due to kernel taint
[   13.794168] wl: module verification failed: signature and/or  required key missing - tainting kernel
[   13.816600] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[   13.827351] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[   13.830581] lib80211_crypt: registered algorithm 'TKIP'
[   13.855807] HDA driver get symbol successfully from i915 module
[   13.857029] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[   13.860222] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[   13.882872] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   13.882933] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   13.882978] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[   13.888409] SKU: Nid=0x1d sku_cfg=0x4076a12d
[   13.888412] SKU: port_connectivity=0x1
[   13.888414] SKU: enable_pcbeep=0x1
[   13.888415] SKU: check_sum=0x00000006
[   13.888416] SKU: customization=0x000000a1
[   13.888418] SKU: external_amp=0x5
[   13.888419] SKU: platform_type=0x1
[   13.888420] SKU: swap=0x0
[   13.888421] SKU: override=0x1
[   13.888644] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.888645]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.888647]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   13.888648]    mono: mono_out=0x0
[   13.888649]    inputs:
[   13.888651]      Mic=0x1a
[   13.888653]      Internal Mic=0x12
[   13.888654] realtek: No valid SSID, checking pincfg 0x4076a12d for NID 0x1d
[   13.888656] realtek: Enabling init ASM_ID=0xa12d CODEC_ID=10ec0290
[   13.905761] kvm: disabled by bios
[   13.911505] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   13.911612] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   13.923259] device-mapper: multipath: version 1.6.0 loaded
[   13.953803] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[   14.035515] Linux video capture interface: v2.00
[   14.042330] Bluetooth: Core ver 2.17
[   14.042345] NET: Registered protocol family 31
[   14.042347] Bluetooth: HCI device and connection manager initialized
[   14.042353] Bluetooth: HCI socket layer initialized
[   14.042356] Bluetooth: L2CAP socket layer initialized
[   14.042360] Bluetooth: SCO socket layer initialized
[   14.047449] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c344)
[   14.048542] usbcore: registered new interface driver btusb
[   14.055317] input: HP Truevision HD as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
[   14.055361] intel_rapl: domain uncore energy ctr 4472:4472 not working, skip
[   14.055461] usbcore: registered new interface driver uvcvideo
[   14.055463] USB Video Class driver (1.1.1)
[   14.079165] input: HP WMI hotkeys as /devices/virtual/input/input16
[   14.079391] usb 1-1.7: Direct firmware load failed with error -2
[   14.079394] usb 1-1.7: Falling back to user helper
[   14.106611] Bluetooth: can't load firmware, may not work correctly
[   14.443970] cfg80211: World regulatory domain updated:
[   14.443974] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.443976] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.443977] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.443979] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.443980] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.443981] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.505210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.060982] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   15.600977] init: failsafe main process (733) killed by TERM signal
[   15.905655] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.905659] Bluetooth: BNEP filters: protocol multicast
[   15.905667] Bluetooth: BNEP socket layer initialized
[   15.906290] Bluetooth: RFCOMM TTY layer initialized
[   15.906297] Bluetooth: RFCOMM socket layer initialized
[   15.906300] Bluetooth: RFCOMM ver 1.11
[   16.205725] init: cups main process (870) killed by HUP signal
[   16.205732] init: cups main process ended, respawning
[   17.120275] r8169 0000:09:00.0 eth0: link down
[   17.120325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.120632] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.379150] init: samba-ad-dc main process (912) terminated with status 1
[   18.203548] bbswitch: version 0.8
[   18.203553] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   18.203556] bbswitch: Found discrete VGA device 0000:0a:00.0: \_SB_.PCI0.RP05.PEGP
[   18.203564] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   18.203611] bbswitch: detected an Optimus _DSM function
[   18.203623] pci 0000:0a:00.0: enabling device (0006 -> 0007)
[   18.203664] bbswitch: Succesfully loaded. Discrete card 0000:0a:00.0 is on
[   18.204871] bbswitch: disabling discrete graphics
[   18.204878] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   18.875864] init: plymouth-upstart-bridge main process ended, respawning
[   18.879553] init: plymouth-upstart-bridge main process (1417) terminated with status 1
[   18.879559] init: plymouth-upstart-bridge main process ended, respawning
[   35.543979] init: anacron main process (1153) killed by TERM signal
[   41.130141] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   41.130155] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.226257] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   41.226262] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.327520] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   41.327524] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.418436] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   41.418441] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.514424] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   41.514431] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.643513] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   41.643520] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.734556] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   41.734568] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.857663] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   41.857675] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   41.971701] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   41.971709] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.096817] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   42.096829] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.166909] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   42.166922] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.303055] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   42.303067] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.388999] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   42.389011] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.510099] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   42.510105] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.605222] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   42.605234] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.726320] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   42.726326] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.827378] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   42.827390] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   42.939398] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   42.939405] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   43.052425] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   43.052431] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   43.279633] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   43.279638] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   43.384131] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   43.384141] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   43.512036] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   43.512043] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   43.686083] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   43.686096] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   43.819058] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   43.819063] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   43.932246] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   43.932260] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.039791] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   44.039802] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.162581] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   44.162591] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.315008] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   44.315014] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.403601] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   44.403613] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.584809] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   44.584820] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.680716] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   44.680726] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.830863] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   44.830869] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   44.931934] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   44.931940] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   45.135447] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   45.135459] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   48.230898] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   48.230911] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   48.408273] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   48.408281] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   48.842462] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   48.842467] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   48.932485] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   48.932491] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   49.333831] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[   49.333845] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[   49.500985] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[   49.500991] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.

ArchangeGabriel · Le 16/01/2015, à 11:21

Excuse-moi, j’aurai dû le préciser, il faut que cela corresponde à une session où tu as essayé optirun.

Alcatorda · Le 16/01/2015, à 12:28

J'aurai dû m'en douter, shame on me.

Avec VirtualGL :

[   18.148926] bbswitch: version 0.8
[   18.148942] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   18.148947] bbswitch: Found discrete VGA device 0000:0a:00.0: \_SB_.PCI0.RP05.PEGP
[   18.148956] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   18.149024] bbswitch: detected an Optimus _DSM function
[   18.149039] pci 0000:0a:00.0: enabling device (0006 -> 0007)
[   18.149087] bbswitch: Succesfully loaded. Discrete card 0000:0a:00.0 is on
[   18.150493] bbswitch: disabling discrete graphics
[   18.150501] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   18.842882] init: plymouth-upstart-bridge main process ended, respawning
[   18.846296] init: plymouth-upstart-bridge main process (1406) terminated with status 1
[   18.846303] init: plymouth-upstart-bridge main process ended, respawning
[   46.478907] bbswitch: enabling discrete graphics
[   46.788877] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:0a:00.0 on minor 1
[   46.788882] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.113  Mon Dec  1 21:08:13 PST 2014

Avec Primus :

[   17.929414] bbswitch: version 0.8
[   17.929419] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   17.929422] bbswitch: Found discrete VGA device 0000:0a:00.0: \_SB_.PCI0.RP05.PEGP
[   17.929428] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   17.929469] bbswitch: detected an Optimus _DSM function
[   17.929481] pci 0000:0a:00.0: enabling device (0006 -> 0007)
[   17.929518] bbswitch: Succesfully loaded. Discrete card 0000:0a:00.0 is on
[   17.931412] bbswitch: disabling discrete graphics
[   17.931421] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   18.640909] init: plymouth-upstart-bridge main process ended, respawning
[   18.643895] init: plymouth-upstart-bridge main process (1406) terminated with status 1
[   18.643901] init: plymouth-upstart-bridge main process ended, respawning
[   45.072077] bbswitch: enabling discrete graphics
[   45.387876] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:0a:00.0 on minor 1
[   45.387882] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.113  Mon Dec  1 21:08:13 PST 2014

ArchangeGabriel · Le 16/01/2015, à 12:53

Il n’y a rien d’autre après dans dmesg ? C’est bizarre… Et sinon, peux-tu également fournir le fichier /var/log/Xorg.8.log ? (Pas besoin de lancer optirun pour le générer, il doit déjà exister).

Alcatorda · Le 16/01/2015, à 14:51

Rien d'autre après.
Peut-être à force de bidouiller, installer, désinstaller, réinstaller… Je peux repartir sur un système propre si tu penses que c'est mieux.
Mais le message d'erreur est le même depuis le début.

Et je n'ai pas de Xorg.8.log, mais j'ai un Xorg.0.log :

[    18.462] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    18.462] X Protocol Version 11, Revision 0
[    18.462] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu
[    18.462] Current Operating System: Linux pikachu 3.13.0-37-generic #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 x86_64
[    18.462] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=5db35289-3a5f-428d-b854-33f80bf48f53 ro quiet splash rcutree.rcu_idle_gp_delay=1 vt.handoff=7
[    18.462] Build Date: 30 July 2014  12:21:54AM
[    18.462] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) 
[    18.462] Current version of pixman: 0.30.2
[    18.462] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.462] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.462] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 16 11:21:21 2015
[    18.487] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.491] (==) No Layout section.  Using the first Screen section.
[    18.491] (==) No screen section available. Using defaults.
[    18.491] (**) |-->Screen "Default Screen Section" (0)
[    18.491] (**) |   |-->Monitor "<default monitor>"
[    18.491] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    18.491] (==) Automatically adding devices
[    18.491] (==) Automatically enabling devices
[    18.491] (==) Automatically adding GPU devices
[    18.491] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.491] 	Entry deleted from font path.
[    18.491] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    18.491] 	Entry deleted from font path.
[    18.491] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    18.491] 	Entry deleted from font path.
[    18.491] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    18.491] 	Entry deleted from font path.
[    18.491] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    18.491] 	Entry deleted from font path.
[    18.491] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    18.491] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    18.491] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.491] (II) Loader magic: 0x7fd75f2f3d40
[    18.491] (II) Module ABI versions:
[    18.491] 	X.Org ANSI C Emulation: 0.4
[    18.491] 	X.Org Video Driver: 15.0
[    18.491] 	X.Org XInput driver : 20.0
[    18.491] 	X.Org Server Extension : 8.0
[    18.491] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.492] (--) PCI:*(0:0:2:0) 8086:0a16:103c:2282 rev 11, Mem @ 0xb5000000/4194304, 0xc0000000/268435456, I/O @ 0x00006000/64
[    18.492] Initializing built-in extension Generic Event Extension
[    18.492] Initializing built-in extension SHAPE
[    18.492] Initializing built-in extension MIT-SHM
[    18.492] Initializing built-in extension XInputExtension
[    18.492] Initializing built-in extension XTEST
[    18.492] Initializing built-in extension BIG-REQUESTS
[    18.492] Initializing built-in extension SYNC
[    18.492] Initializing built-in extension XKEYBOARD
[    18.492] Initializing built-in extension XC-MISC
[    18.492] Initializing built-in extension SECURITY
[    18.492] Initializing built-in extension XINERAMA
[    18.492] Initializing built-in extension XFIXES
[    18.492] Initializing built-in extension RENDER
[    18.492] Initializing built-in extension RANDR
[    18.492] Initializing built-in extension COMPOSITE
[    18.492] Initializing built-in extension DAMAGE
[    18.492] Initializing built-in extension MIT-SCREEN-SAVER
[    18.492] Initializing built-in extension DOUBLE-BUFFER
[    18.492] Initializing built-in extension RECORD
[    18.492] Initializing built-in extension DPMS
[    18.492] Initializing built-in extension Present
[    18.492] Initializing built-in extension DRI3
[    18.492] Initializing built-in extension X-Resource
[    18.492] Initializing built-in extension XVideo
[    18.492] Initializing built-in extension XVideo-MotionCompensation
[    18.492] Initializing built-in extension SELinux
[    18.492] Initializing built-in extension XFree86-VidModeExtension
[    18.492] Initializing built-in extension XFree86-DGA
[    18.492] Initializing built-in extension XFree86-DRI
[    18.492] Initializing built-in extension DRI2
[    18.492] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    18.492] (II) "glx" will be loaded by default.
[    18.492] (WW) "xmir" is not to be loaded by default. Skipping.
[    18.492] (II) LoadModule: "glx"
[    18.529] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.581] (II) Module glx: vendor="X.Org Foundation"
[    18.581] 	compiled for 1.15.1, module version = 1.0.0
[    18.581] 	ABI class: X.Org Server Extension, version 8.0
[    18.581] (==) AIGLX enabled
[    18.581] Loading extension GLX
[    18.581] (==) Matched intel as autoconfigured driver 0
[    18.581] (==) Matched intel as autoconfigured driver 1
[    18.581] (==) Matched modesetting as autoconfigured driver 2
[    18.581] (==) Matched fbdev as autoconfigured driver 3
[    18.581] (==) Matched vesa as autoconfigured driver 4
[    18.581] (==) Assigned the driver to the xf86ConfigLayout
[    18.581] (II) LoadModule: "intel"
[    18.581] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    18.601] (II) Module intel: vendor="X.Org Foundation"
[    18.601] 	compiled for 1.15.1, module version = 2.99.910
[    18.601] 	Module class: X.Org Video Driver
[    18.601] 	ABI class: X.Org Video Driver, version 15.0
[    18.601] (II) LoadModule: "modesetting"
[    18.602] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.602] (II) Module modesetting: vendor="X.Org Foundation"
[    18.602] 	compiled for 1.15.0, module version = 0.8.1
[    18.602] 	Module class: X.Org Video Driver
[    18.602] 	ABI class: X.Org Video Driver, version 15.0
[    18.602] (II) LoadModule: "fbdev"
[    18.602] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    18.602] (II) Module fbdev: vendor="X.Org Foundation"
[    18.602] 	compiled for 1.15.0, module version = 0.4.4
[    18.602] 	Module class: X.Org Video Driver
[    18.602] 	ABI class: X.Org Video Driver, version 15.0
[    18.602] (II) LoadModule: "vesa"
[    18.602] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.602] (II) Module vesa: vendor="X.Org Foundation"
[    18.602] 	compiled for 1.15.0, module version = 2.3.3
[    18.602] 	Module class: X.Org Video Driver
[    18.602] 	ABI class: X.Org Video Driver, version 15.0
[    18.602] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    18.602] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    18.602] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    18.602] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    18.602] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.602] (II) FBDEV: driver for framebuffer: fbdev
[    18.602] (II) VESA: driver for VESA chipsets: vesa
[    18.602] (++) using VT number 8

[    18.605] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[    18.605] (WW) Falling back to old probe method for modesetting
[    18.605] (WW) Falling back to old probe method for fbdev
[    18.605] (II) Loading sub module "fbdevhw"
[    18.605] (II) LoadModule: "fbdevhw"
[    18.605] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    18.606] (II) Module fbdevhw: vendor="X.Org Foundation"
[    18.606] 	compiled for 1.15.1, module version = 0.0.2
[    18.606] 	ABI class: X.Org Video Driver, version 15.0
[    18.606] (WW) Falling back to old probe method for vesa
[    18.606] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    18.606] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    18.606] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.606] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    18.606] (==) intel(0): RGB weight 888
[    18.606] (==) intel(0): Default visual is TrueColor
[    18.606] (**) intel(0): Framebuffer tiled
[    18.606] (**) intel(0): Pixmaps tiled
[    18.606] (**) intel(0): "Tear free" disabled
[    18.606] (**) intel(0): Forcing per-crtc-pixmaps? no
[    18.606] (II) intel(0): Output eDP1 has no monitor section
[    18.606] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[    18.606] (II) intel(0): Output HDMI1 has no monitor section
[    18.606] (II) intel(0): Output VIRTUAL1 has no monitor section
[    18.606] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[    18.606] (==) intel(0): DPI set to (96, 96)
[    18.606] (II) Loading sub module "dri2"
[    18.606] (II) LoadModule: "dri2"
[    18.606] (II) Module "dri2" already built-in
[    18.606] (II) UnloadModule: "modesetting"
[    18.606] (II) Unloading modesetting
[    18.606] (II) UnloadModule: "fbdev"
[    18.606] (II) Unloading fbdev
[    18.607] (II) UnloadSubModule: "fbdevhw"
[    18.607] (II) Unloading fbdevhw
[    18.607] (II) UnloadModule: "vesa"
[    18.607] (II) Unloading vesa
[    18.607] (==) Depth 24 pixmap format is 32 bpp
[    18.607] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    18.607] (==) intel(0): Backing store enabled
[    18.607] (==) intel(0): Silken mouse enabled
[    18.607] (II) intel(0): HW Cursor enabled
[    18.607] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.607] (==) intel(0): DPMS enabled
[    18.607] (II) intel(0): [DRI2] Setup complete
[    18.607] (II) intel(0): [DRI2]   DRI driver: i965
[    18.607] (II) intel(0): [DRI2]   VDPAU driver: i965
[    18.607] (II) intel(0): direct rendering: DRI2 Enabled
[    18.607] (==) intel(0): hotplug detection: "enabled"
[    18.607] (--) RandR disabled
[    18.611] (II) SELinux: Disabled on system
[    18.624] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    18.624] (II) AIGLX: enabled GLX_ARB_create_context
[    18.624] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    18.624] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    18.624] (II) AIGLX: enabled GLX_INTEL_swap_event
[    18.624] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    18.624] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    18.624] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    18.624] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    18.624] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    18.624] (II) AIGLX: Loaded and initialized i965
[    18.624] (II) GLX: Initialized DRI2 GL provider for screen 0
[    18.626] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    18.644] (II) intel(0): Setting screen physical size to 423 x 238
[    18.657] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    18.659] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.659] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.659] (II) LoadModule: "evdev"
[    18.659] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.670] (II) Module evdev: vendor="X.Org Foundation"
[    18.670] 	compiled for 1.15.0, module version = 2.8.2
[    18.670] 	Module class: X.Org XInput Driver
[    18.670] 	ABI class: X.Org XInput driver, version 20.0
[    18.670] (II) Using input driver 'evdev' for 'Power Button'
[    18.670] (**) Power Button: always reports core events
[    18.670] (**) evdev: Power Button: Device: "/dev/input/event2"
[    18.670] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.670] (--) evdev: Power Button: Found keys
[    18.670] (II) evdev: Power Button: Configuring as keyboard
[    18.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    18.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.670] (**) Option "xkb_rules" "evdev"
[    18.670] (**) Option "xkb_model" "pc105"
[    18.670] (**) Option "xkb_layout" "fr"
[    18.670] (**) Option "xkb_variant" "bepo"
[    18.672] (II) XKB: reuse xkmfile /var/lib/xkb/server-67FEE248AE005BC59703A41C491A0AE89C6B8239.xkm
[    18.672] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    18.672] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.672] (II) Using input driver 'evdev' for 'Video Bus'
[    18.673] (**) Video Bus: always reports core events
[    18.673] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    18.673] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.673] (--) evdev: Video Bus: Found keys
[    18.673] (II) evdev: Video Bus: Configuring as keyboard
[    18.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event6"
[    18.673] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.673] (**) Option "xkb_rules" "evdev"
[    18.673] (**) Option "xkb_model" "pc105"
[    18.673] (**) Option "xkb_layout" "fr"
[    18.673] (**) Option "xkb_variant" "bepo"
[    18.673] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    18.673] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.673] (II) Using input driver 'evdev' for 'Video Bus'
[    18.673] (**) Video Bus: always reports core events
[    18.673] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    18.673] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.673] (--) evdev: Video Bus: Found keys
[    18.673] (II) evdev: Video Bus: Configuring as keyboard
[    18.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/LNXVIDEO:00/input/input6/event5"
[    18.673] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    18.673] (**) Option "xkb_rules" "evdev"
[    18.673] (**) Option "xkb_model" "pc105"
[    18.673] (**) Option "xkb_layout" "fr"
[    18.673] (**) Option "xkb_variant" "bepo"
[    18.673] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.673] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.673] (II) Using input driver 'evdev' for 'Power Button'
[    18.673] (**) Power Button: always reports core events
[    18.673] (**) evdev: Power Button: Device: "/dev/input/event1"
[    18.673] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.673] (--) evdev: Power Button: Found keys
[    18.673] (II) evdev: Power Button: Configuring as keyboard
[    18.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    18.673] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    18.673] (**) Option "xkb_rules" "evdev"
[    18.673] (**) Option "xkb_model" "pc105"
[    18.673] (**) Option "xkb_layout" "fr"
[    18.673] (**) Option "xkb_variant" "bepo"
[    18.673] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    18.673] (II) No input driver specified, ignoring this device.
[    18.673] (II) This device may have been added with another device file.
[    18.673] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    18.673] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    18.674] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[    18.674] (II) No input driver specified, ignoring this device.
[    18.674] (II) This device may have been added with another device file.
[    18.674] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[    18.674] (II) No input driver specified, ignoring this device.
[    18.674] (II) This device may have been added with another device file.
[    18.674] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[    18.674] (II) No input driver specified, ignoring this device.
[    18.674] (II) This device may have been added with another device file.
[    18.674] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    18.674] (II) No input driver specified, ignoring this device.
[    18.674] (II) This device may have been added with another device file.
[    18.674] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    18.674] (II) No input driver specified, ignoring this device.
[    18.674] (II) This device may have been added with another device file.
[    18.674] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event15)
[    18.674] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[    18.674] (II) Using input driver 'evdev' for 'HP Truevision HD'
[    18.674] (**) HP Truevision HD: always reports core events
[    18.674] (**) evdev: HP Truevision HD: Device: "/dev/input/event15"
[    18.674] (--) evdev: HP Truevision HD: Vendor 0x64e Product 0xc344
[    18.674] (--) evdev: HP Truevision HD: Found keys
[    18.674] (II) evdev: HP Truevision HD: Configuring as keyboard
[    18.674] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16/event15"
[    18.674] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 10)
[    18.674] (**) Option "xkb_rules" "evdev"
[    18.674] (**) Option "xkb_model" "pc105"
[    18.674] (**) Option "xkb_layout" "fr"
[    18.674] (**) Option "xkb_variant" "bepo"
[    18.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    18.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.674] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.674] (**) AT Translated Set 2 keyboard: always reports core events
[    18.674] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    18.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    18.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    18.675] (**) Option "xkb_rules" "evdev"
[    18.675] (**) Option "xkb_model" "pc105"
[    18.675] (**) Option "xkb_layout" "fr"
[    18.675] (**) Option "xkb_variant" "bepo"
[    18.675] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[    18.675] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    18.675] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    18.675] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    18.675] (II) LoadModule: "synaptics"
[    18.675] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.675] (II) Module synaptics: vendor="X.Org Foundation"
[    18.675] 	compiled for 1.15.0, module version = 1.7.4
[    18.675] 	Module class: X.Org XInput Driver
[    18.675] 	ABI class: X.Org XInput driver, version 20.0
[    18.675] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    18.675] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.675] (**) Option "Device" "/dev/input/event4"
[    18.692] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    18.692] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5656 (res 41)
[    18.692] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4712 (res 58)
[    18.692] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    18.692] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    18.692] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    18.692] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    18.692] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    18.692] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.692] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.704] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[    18.704] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    18.704] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    18.704] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    18.704] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[    18.704] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    18.704] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    18.704] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    18.704] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    18.704] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.704] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    18.704] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    18.704] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[    18.704] (II) No input driver specified, ignoring this device.
[    18.704] (II) This device may have been added with another device file.
[    18.704] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    18.704] (II) No input driver specified, ignoring this device.
[    18.704] (II) This device may have been added with another device file.
[    18.705] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event14)
[    18.705] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    18.705] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    18.705] (**) HP WMI hotkeys: always reports core events
[    18.705] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event14"
[    18.705] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    18.705] (--) evdev: HP WMI hotkeys: Found keys
[    18.705] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    18.705] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event14"
[    18.705] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    18.705] (**) Option "xkb_rules" "evdev"
[    18.705] (**) Option "xkb_model" "pc105"
[    18.705] (**) Option "xkb_layout" "fr"
[    18.705] (**) Option "xkb_variant" "bepo"
[    18.706] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[    18.706] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    18.706] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[    18.706] (**) HP Wireless hotkeys: always reports core events
[    18.706] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event7"
[    18.706] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[    18.706] (--) evdev: HP Wireless hotkeys: Found keys
[    18.706] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[    18.706] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[    18.706] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 14)
[    18.706] (**) Option "xkb_rules" "evdev"
[    18.706] (**) Option "xkb_model" "pc105"
[    18.706] (**) Option "xkb_layout" "fr"
[    18.706] (**) Option "xkb_variant" "bepo"
[    30.870] (II) intel(0): EDID vendor "SDC", prod id 13908
[    30.870] (II) intel(0): Printing DDC gathered Modelines:
[    30.870] (II) intel(0): Modeline "1600x900"x0.0  128.78  1600 1648 1680 2298  900 902 907 934 -hsync -vsync (56.0 kHz eP)
[    30.870] (II) intel(0): Modeline "1600x900"x0.0   85.85  1600 1648 1680 2298  900 902 907 934 -hsync -vsync (37.4 kHz e)
[    32.439] (II) XKB: reuse xkmfile /var/lib/xkb/server-7E8F79371A177BBDC9CEE380DA0552C5B989A44C.xkm
[    32.545] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.587] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.589] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.592] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.595] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.597] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.600] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.603] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.605] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.608] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    34.611] (II) XKB: reuse xkmfile /var/lib/xkb/server-D78D1A4D5C7C8901CDBC996411B9D691D33B5450.xkm
[    46.290] (II) config/udev: Adding drm device (/dev/dri/card1) card1 /sys/devices/pci0000:00/0000:00:1c.4/0000:0a:00.0/drm/card1
[    46.290] (II) xfree86: Adding drm device (/dev/dri/card1)
[    46.290] (II) LoadModule: "modesetting"
[    46.290] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    46.291] (II) Module modesetting: vendor="X.Org Foundation"
[    46.291] 	compiled for 1.15.0, module version = 0.8.1
[    46.291] 	Module class: X.Org Video Driver
[    46.291] 	ABI class: X.Org Video Driver, version 15.0
[    46.291] xf86: found device 1

ArchangeGabriel · Le 17/01/2015, à 02:40

Euh… Bon on va peut-être repartir sur une install propre, à tout hasard avant cela peux-tu donner le retour de la commande suivante :

optirun -vv glxinfo

Alcatorda · Le 17/01/2015, à 11:06

[54601.600187] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[54601.600813] [INFO]Configured driver: nvidia
[54601.601051] [DEBUG]optirun version 3.2.1 starting...
[54601.601081] [DEBUG]Active configuration:
[54601.601089] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[54601.601099] [DEBUG] X display: :8
[54601.601107] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-331:/usr/lib32/nvidia-331
[54601.601117] [DEBUG] Socket path: /var/run/bumblebee.socket
[54601.601125] [DEBUG] Accel/display bridge: auto
[54601.601134] [DEBUG] VGL Compression: proxy
[54601.601141] [DEBUG] VGLrun extra options: 
[54601.601149] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[54601.601219] [DEBUG]Using auto-detected bridge virtualgl
[54601.607793] [INFO]Response: No - error: [XORG] (EE) 

[54601.607824] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) 

[54601.607832] [DEBUG]Socket closed.
[54601.607867] [ERROR]Aborting because fallback start is disabled.
[54601.607877] [DEBUG]Killing all remaining processes.

ArchangeGabriel · Le 17/01/2015, à 11:27

Et donc pas de Xorg.8.log ? Et rien de plus dans le dmesg ? Jamais rien vu d’aussi étrange. Un dernier truc à tester :

sudo stop bumblebeed (ou la commande équivalente pour arrêter un démon)
sudo bumblebeed -vv

Puis dans un autre terminal, la commande optirun d’avant.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#776 Le 02/01/2015, à 19:00

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#777 Le 02/01/2015, à 19:55

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#778 Le 02/01/2015, à 20:17

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#779 Le 02/01/2015, à 20:22

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#780 Le 02/01/2015, à 21:40

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#781 Le 03/01/2015, à 03:29

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#782 Le 03/01/2015, à 04:12

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#783 Le 03/01/2015, à 12:49

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#784 Le 03/01/2015, à 14:39

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#785 Le 03/01/2015, à 14:55

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#786 Le 03/01/2015, à 15:53

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#787 Le 03/01/2015, à 16:45

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#788 Le 03/01/2015, à 17:20

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#789 Le 03/01/2015, à 20:46

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#790 Le 03/01/2015, à 23:44

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#791 Le 15/01/2015, à 12:03

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#792 Le 15/01/2015, à 15:29

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#793 Le 16/01/2015, à 08:27

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#794 Le 16/01/2015, à 11:21

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#795 Le 16/01/2015, à 12:28

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#796 Le 16/01/2015, à 12:53

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#797 Le 16/01/2015, à 14:51

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#798 Le 17/01/2015, à 02:40

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#799 Le 17/01/2015, à 11:06

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

#800 Le 17/01/2015, à 11:27

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Pied de page des forums