Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 06/02/2013, à 20:46

methyl

[Résolu] Acer iconia pau-30 carte graphique intel et Separate X screen

Bonjour a tous,

Je ne parvient pas depuis un petit moment a faire ce que je veux avec mon serveur X.
J'aimerais que mes 2 écrans soit utilisable via  "export DISPLAY=:0.0" et "export DISPLAY=:0.1"

J'ai  bien mes 2 écrans en :0.0 et :0.1 mais je ne parvient pas a appliqué une "inverted" rotation de 180° mon 2 ème écran et donc inversé.

J'ai mon 2eme écran tactile connecté au Screen1 mais je ne trouve pas les information

A la basse je fais ce choix car les ecran tactile au moment de la redimension beug

xrandr --output LVDS2 --mode 1366x768 --pos 0x768 --rotate inverted --output LVDS1 --mode 1366x768 --pos 0x0 --rotate normal
xinput set-prop "pointer:Cypress Semiconductor CYTCB4S-01001" "Coordinate Transformation Matrix"  1 0 0 0 0.5 0 0 0 1
xinput set-prop "pointer:Cypress Semiconductor CYTCB4S-01002" "Coordinate Transformation Matrix" -1 0 1 0 -0.5 1 0 0 1

provoque un comportement étrange du tactile le curseur saute
iconia beug tactile
avec un seul écran pas de problème.

xrandr --output LVDS2 --off --output LVDS1 --mode 1366x768 --pos 0x0 --rotate normal
xinput set-prop "pointer:Cypress Semiconductor CYTCB4S-01001" "Coordinate Transformation Matrix"  1 0 0 0 1 0 0 0 1
xinput set-prop "pointer:Cypress Semiconductor CYTCB4S-01002" "Coordinate Transformation Matrix"  1 0 0 0 1 0 0 0 1

iconia test

Section "Device"
	Identifier "Intel0"
	Driver     "intel"
	BusID	   "PCI:0:2:0"
	Option     "ZaphodHeads" "LVDS1"
        Option     "monitor-LVDS1" "Monitor0"
	Option     "AccelMethod"  "sna"
	Screen     0
EndSection

Section "Device"
	Identifier "Intel1"
	Driver     "intel"
	BusID	   "PCI:0:2:0"
	Option     "ZaphodHeads" "LVDS2"
        Option     "monitor-LVDS2" "Monitor1"
	Option     "AccelMethod"  "sna"
#	Option     "RandRRotation" "on"#[  8614.876] (WW) intel(1): Option "RandRRotation" is not used
#        Option     "Rotate" "Right" #[  8614.582] (**) intel(0): Option "Rotate" "Right" is not used
	Screen     1


EndSection

Section "ServerFlags"
        Option "AutoAddDevices"     "false"
        Option "AutoEnableDevices"  "false"
        Option "AllowMouseOpenFail" "on"
        Option "AllowEmptyInput" "on"
        Option "ZapWarning"         "on"
        Option "HandleSepcialKeys"  "off" # Zapping on
        Option "DRI2" "on"
	Option "Xinerama" "false"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Intel0"
	Monitor        "Monitor0"
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Intel1"
	Monitor        "Monitor1"

EndSection

Section "ServerLayout"
	Identifier "default"
	Screen     "Screen0" 0 0
	Screen     "Screen1" 0 0
#	Screen      0  "Screen0" 0 0
#	Screen      1  "Screen1" Below "Screen0"
        InputDevice "Mouse0" "CorePointer"
        InputDevice "lvds1touchscreen" "CorePointer"
        InputDevice "Keyboard0" "CoreKeyboard"
EndSection


Section "InputDevice"
        Identifier      "keyboard0"
        Driver          "evdev"
        Option          "Device"                "/dev/input/by-id/usb-_USB_Keyboard-event-kbd"
        Option "xkb_rules" "evdev"
        Option "xkb_model" "evdev"
        Option "xkb_layout" "fr"
        Option "GrabDevice" "on" 
EndSection



Section "InputDevice"
        Identifier "Mouse0"
        Driver "evdev"
        Option "Device" "/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse"
        Option "GrabDevice" "on"

EndSection

Section "InputDevice"
        Identifier "lvds1touchscreen"
        Driver "evdev"
        Option "device" "/dev/input/by-id/usb-Cypress_Semiconductor_CYTCB4S-01001_1B0B08E9022A0430-event-if00"
EndSection


Section "Monitor"
    Identifier     "Monitor1"
EndSection

Section "Monitor"
	Identifier     "Monitor0"
#    Option "Rotate"  "inverted" provoque >>>
#(EE) 
#(EE) Backtrace:
#(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x7f6a6fc80b76]
#(EE) 1: /usr/bin/X (0x7f6a6fad8000+0x1ac9a9) [0x7f6a6fc849a9]
#(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f6a6edfe000+0xfcb0) [0x7f6a6ee0dcb0]
#(EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6a6c7ee000+0xae4a2) [0x7f6a6c89c4a2]
#(EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6a6c7ee000+0xb4426) [0x7f6a6c8a2426]
#(EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6a6c7ee000+0x6b74b) [0x7f6a6c85974b]
#(EE) 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6a6c7ee000+0x5ce0f) [0x7f6a6c84ae0f]
#(EE) 7: /usr/bin/X (BlockHandler+0x44) [0x7f6a6fb31c34]
#(EE) 8: /usr/bin/X (WaitForSomething+0x114) [0x7f6a6fc7df24]
#(EE) 9: /usr/bin/X (0x7f6a6fad8000+0x557e1) [0x7f6a6fb2d7e1]
#(EE) 10: /usr/bin/X (0x7f6a6fad8000+0x4456a) [0x7f6a6fb1c56a]
#(EE) 11: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7f6a6da8376d]
#(EE) 12: /usr/bin/X (0x7f6a6fad8000+0x448ad) [0x7f6a6fb1c8ad]
#(EE) 
#(EE) Segmentation fault at address 0x0
#Fatal server error:
#Caught signal 11 (Segmentation fault). Server aborting
EndSection

Mon bute final et obtenir ceci:
iconia final
C'est pour cette raison que la souris du bas ne doit pas être la même que celle du haut pour crée un touchpad virtuel vos idée et commentaire son les bienvenu

Merci a tous

Dernière modification par methyl (Le 07/02/2013, à 23:09)

Hors ligne

#2 Le 07/02/2013, à 15:19

methyl

Re : [Résolu] Acer iconia pau-30 carte graphique intel et Separate X screen

Avec

xdotool mousemove --screen 1 110 110

pour  faire passé la souris sur le screen 1
il ne manque plus que écran tactile du bas (l'image et toujours retourné mais c'est pas essentiel)

Xorg.0.log

[  2314.567] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[  2314.572] X Protocol Version 11, Revision 0
[  2314.574] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu
[  2314.576] Current Operating System: Linux acer 3.5.0-23-generic #35-Ubuntu SMP Thu Jan 24 13:15:40 UTC 2013 x86_64
[  2314.576] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=76ae1e5c-cfbb-4a31-8d0f-63f1bb008c37 ro
[  2314.580] Build Date: 27 November 2012  07:44:35AM
[  2314.581] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support) 
[  2314.582] Current version of pixman: 0.26.0
[  2314.584] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2314.584] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2314.589] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb  7 15:10:42 2013
[  2314.590] (==) Using config file: "/etc/X11/xorg.conf"
[  2314.591] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2314.591] (==) ServerLayout "default"
[  2314.591] (**) |-->Screen "Screen0" (0)
[  2314.591] (**) |   |-->Monitor "Monitor0"
[  2314.592] (**) |   |-->Device "Intel0"
[  2314.592] (**) |-->Screen "Screen1" (1)
[  2314.592] (**) |   |-->Monitor "Monitor1"
[  2314.592] (**) |   |-->Device "Intel1"
[  2314.592] (**) |-->Input Device "Mouse0"
[  2314.592] (**) |-->Input Device "lvds1touchscreen"
[  2314.592] (**) |-->Input Device "keyboard0"
[  2314.592] (**) Option "AllowMouseOpenFail" "on"
[  2314.592] (**) Option "Xinerama" "false"
[  2314.592] (**) Option "AutoAddDevices" "false"
[  2314.592] (**) Option "AutoEnableDevices" "false"
[  2314.592] (**) Option "DRI2" "on"
[  2314.592] (**) Not automatically adding devices
[  2314.592] (**) Not automatically enabling devices
[  2314.592] (==) Automatically adding GPU devices
[  2314.592] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  2314.592] 	Entry deleted from font path.
[  2314.592] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  2314.592] 	Entry deleted from font path.
[  2314.592] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  2314.592] 	Entry deleted from font path.
[  2314.592] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  2314.592] 	Entry deleted from font path.
[  2314.592] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  2314.592] 	Entry deleted from font path.
[  2314.592] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[  2314.592] 	Entry deleted from font path.
[  2314.592] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[  2314.592] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  2314.592] (II) Loader magic: 0x7f47e444ec40
[  2314.592] (II) Module ABI versions:
[  2314.592] 	X.Org ANSI C Emulation: 0.4
[  2314.592] 	X.Org Video Driver: 13.0
[  2314.592] 	X.Org XInput driver : 18.0
[  2314.592] 	X.Org Server Extension : 7.0
[  2314.592] (II) config/udev: Adding drm device (/dev/dri/card0)
[  2314.594] (--) PCI:*(0:0:2:0) 8086:0046:1025:047e rev 2, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00004050/8
[  2314.594] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2314.595] Initializing built-in extension Generic Event Extension
[  2314.596] Initializing built-in extension SHAPE
[  2314.597] Initializing built-in extension MIT-SHM
[  2314.598] Initializing built-in extension XInputExtension
[  2314.599] Initializing built-in extension XTEST
[  2314.600] Initializing built-in extension BIG-REQUESTS
[  2314.601] Initializing built-in extension SYNC
[  2314.601] Initializing built-in extension XKEYBOARD
[  2314.602] Initializing built-in extension XC-MISC
[  2314.603] Initializing built-in extension SECURITY
[  2314.604] Initializing built-in extension XINERAMA
[  2314.605] Initializing built-in extension XFIXES
[  2314.606] Initializing built-in extension RENDER
[  2314.607] Initializing built-in extension RANDR
[  2314.608] Initializing built-in extension COMPOSITE
[  2314.608] Initializing built-in extension DAMAGE
[  2314.609] Initializing built-in extension MIT-SCREEN-SAVER
[  2314.610] Initializing built-in extension DOUBLE-BUFFER
[  2314.611] Initializing built-in extension RECORD
[  2314.612] Initializing built-in extension DPMS
[  2314.612] Initializing built-in extension X-Resource
[  2314.613] Initializing built-in extension XVideo
[  2314.614] Initializing built-in extension XVideo-MotionCompensation
[  2314.615] Initializing built-in extension XFree86-VidModeExtension
[  2314.615] Initializing built-in extension XFree86-DGA
[  2314.616] Initializing built-in extension XFree86-DRI
[  2314.617] Initializing built-in extension DRI2
[  2314.617] (II) LoadModule: "glx"
[  2314.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2314.617] (II) Module glx: vendor="X.Org Foundation"
[  2314.617] 	compiled for 1.13.0, module version = 1.0.0
[  2314.617] 	ABI class: X.Org Server Extension, version 7.0
[  2314.617] (==) AIGLX enabled
[  2314.618] Loading extension GLX
[  2314.618] (II) LoadModule: "intel"
[  2314.618] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  2314.618] (II) Module intel: vendor="X.Org Foundation"
[  2314.618] 	compiled for 1.13.0, module version = 2.20.9
[  2314.618] 	Module class: X.Org Video Driver
[  2314.618] 	ABI class: X.Org Video Driver, version 13.0
[  2314.618] (II) LoadModule: "evdev"
[  2314.618] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2314.618] (II) Module evdev: vendor="X.Org Foundation"
[  2314.618] 	compiled for 1.13.0, module version = 2.7.3
[  2314.618] 	Module class: X.Org XInput Driver
[  2314.618] 	ABI class: X.Org XInput driver, version 18.0
[  2314.618] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[  2314.619] (--) using VT number 7

[  2314.621] (II) intel(0): using device path '/dev/dri/card0'
[  2314.621] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 (Timo Aaltonen <tjaalton@ubuntu.com>)
[  2314.621] (II) intel(1): using device path '/dev/dri/card0'
[  2314.621] (II) intel(1): SNA compiled: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 (Timo Aaltonen <tjaalton@ubuntu.com>)
[  2314.622] (II) intel(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 24/32
[  2314.622] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  2314.622] (==) intel(0): RGB weight 888
[  2314.622] (==) intel(0): Default visual is TrueColor
[  2314.622] (**) intel(0): Option "AccelMethod" "sna"
[  2314.622] (**) intel(0): Option "ZaphodHeads" "LVDS1"
[  2314.622] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[  2314.622] (**) intel(0): Framebuffer tiled
[  2314.622] (**) intel(0): Pixmaps tiled
[  2314.622] (**) intel(0): 3D buffers tiled
[  2314.622] (**) intel(0): Throttling enabled
[  2314.622] (**) intel(0): Delayed flush enabled
[  2314.622] (**) intel(0): "Tear free" disabled
[  2314.622] (**) intel(0): Forcing per-crtc-pixmaps? no
[  2314.622] (II) intel(0): Output LVDS1 using monitor section Monitor0
[  2314.628] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[  2314.740] (II) intel(0): EDID for output LVDS1
[  2314.740] (II) intel(0): Manufacturer: AUO  Model: 303c  Serial#: 1
[  2314.740] (II) intel(0): Year: 2009  Week: 1
[  2314.740] (II) intel(0): EDID Version: 1.3
[  2314.740] (II) intel(0): Digital Display Input
[  2314.740] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[  2314.740] (II) intel(0): Gamma: 2.20
[  2314.740] (II) intel(0): No DPMS capabilities specified
[  2314.740] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  2314.740] (II) intel(0): First detailed timing is preferred mode
[  2314.740] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[  2314.740] (II) intel(0): blueX: 0.150 blueY: 0.600   whiteX: 0.313 whiteY: 0.329
[  2314.740] (II) intel(0): Manufacturer's mask: 0
[  2314.740] (II) intel(0): Supported detailed timing:
[  2314.740] (II) intel(0): clock: 69.3 MHz   Image Size:  309 x 173 mm
[  2314.740] (II) intel(0): h_active: 1366  h_sync: 1404  h_sync_end 1426 h_blank_end 1436 h_border: 0
[  2314.740] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 803 v_border: 0
[  2314.740] (II) intel(0): Unknown vendor-specific block f
[  2314.740] (II) intel(0):  AUO
[  2314.740] (II) intel(0):  B140XW03 V0
[  2314.740] (II) intel(0): EDID (in hex):
[  2314.740] (II) intel(0): 	00ffffffffffff0006af3c3001000000
[  2314.740] (II) intel(0): 	01130103801f11780ac8a59e57549226
[  2314.740] (II) intel(0): 	99505400000001010101010101010101
[  2314.740] (II) intel(0): 	010101010101121b5646500023302616
[  2314.740] (II) intel(0): 	360035ad100000180000000f00000000
[  2314.740] (II) intel(0): 	00000000000000000020000000fe0041
[  2314.740] (II) intel(0): 	554f0a202020202020202020000000fe
[  2314.740] (II) intel(0): 	004231343058573033205630200a0004
[  2314.740] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[  2314.740] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  2314.740] (II) intel(0): Printing probed modes for output LVDS1
[  2314.741] (II) intel(0): Modeline "1366x768"x60.1   69.30  1366 1404 1426 1436  768 771 777 803 -hsync -vsync (48.3 kHz eP)
[  2314.741] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[  2314.741] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[  2314.741] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2314.741] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2314.741] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2314.741] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2314.741] (II) intel(0): Output LVDS1 connected
[  2314.741] (II) intel(0): Using exact sizes for initial modes
[  2314.741] (II) intel(0): Output LVDS1 using initial mode 1366x768
[  2314.741] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  2314.741] (==) intel(0): DPI set to (96, 96)
[  2314.741] (II) Loading sub module "dri2"
[  2314.741] (II) LoadModule: "dri2"
[  2314.741] (II) Module "dri2" already built-in
[  2314.741] (II) intel(1): Creating default Display subsection in Screen section
	"Screen1" for depth/fbbpp 24/32
[  2314.741] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[  2314.741] (==) intel(1): RGB weight 888
[  2314.741] (==) intel(1): Default visual is TrueColor
[  2314.741] (**) intel(1): Option "AccelMethod" "sna"
[  2314.741] (**) intel(1): Option "ZaphodHeads" "LVDS2"
[  2314.741] (--) intel(1): Integrated Graphics Chipset: Intel(R) Arrandale
[  2314.741] (**) intel(1): Framebuffer tiled
[  2314.741] (**) intel(1): Pixmaps tiled
[  2314.741] (**) intel(1): 3D buffers tiled
[  2314.741] (**) intel(1): Throttling enabled
[  2314.741] (**) intel(1): Delayed flush enabled
[  2314.741] (**) intel(1): "Tear free" disabled
[  2314.741] (**) intel(1): Forcing per-crtc-pixmaps? no
[  2314.790] (II) intel(1): Output LVDS2 using monitor section Monitor1
[  2314.796] (--) intel(1): found backlight control interface acpi_video0 (type 'firmware')
[  2314.908] (II) intel(1): EDID for output LVDS2
[  2314.908] (II) intel(1): Not using default mode "320x240" (doublescan mode not supported)
[  2314.908] (II) intel(1): Not using default mode "400x300" (doublescan mode not supported)
[  2314.908] (II) intel(1): Not using default mode "400x300" (doublescan mode not supported)
[  2314.908] (II) intel(1): Not using default mode "512x384" (doublescan mode not supported)
[  2314.908] (II) intel(1): Not using default mode "640x480" (doublescan mode not supported)
[  2314.908] (II) intel(1): Not using default mode "640x512" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "800x600" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "896x672" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "928x696" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "960x720" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "576x432" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "680x384" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "680x384" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "700x525" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "720x450" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "800x512" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "840x525" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "840x525" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "960x540" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "960x600" (doublescan mode not supported)
[  2314.909] (II) intel(1): Not using default mode "1024x768" (doublescan mode not supported)
[  2314.909] (II) intel(1): Printing probed modes for output LVDS2
[  2314.909] (II) intel(1): Modeline "1366x768"x60.1   69.30  1366 1404 1426 1436  768 771 777 803 -hsync -vsync (48.3 kHz eP)
[  2314.909] (II) intel(1): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[  2314.909] (II) intel(1): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[  2314.909] (II) intel(1): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2314.909] (II) intel(1): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2314.909] (II) intel(1): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2314.909] (II) intel(1): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2314.909] (II) intel(1): Output LVDS2 connected
[  2314.909] (II) intel(1): Using exact sizes for initial modes
[  2314.909] (II) intel(1): Output LVDS2 using initial mode 1366x768
[  2314.909] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  2314.909] (==) intel(1): DPI set to (96, 96)
[  2314.909] (II) Loading sub module "dri2"
[  2314.909] (II) LoadModule: "dri2"
[  2314.909] (II) Module "dri2" already built-in
[  2314.909] (==) Depth 24 pixmap format is 32 bpp
[  2314.909] (II) intel(0): SNA initialized with Ironlake backend
[  2314.909] (==) intel(0): Backing store disabled
[  2314.909] (==) intel(0): Silken mouse enabled
[  2314.910] (II) intel(0): HW Cursor enabled
[  2314.910] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2314.913] (==) intel(0): DPMS enabled
[  2314.913] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[  2314.913] (II) intel(0): [DRI2] Setup complete
[  2314.913] (II) intel(0): [DRI2]   DRI driver: i965
[  2314.913] (II) intel(0): direct rendering: DRI2 Enabled
[  2314.913] (==) intel(0): hotplug detection: "enabled"
[  2314.913] (--) RandR disabled
[  2314.914] (II) intel(1): SNA initialized with Ironlake backend
[  2314.914] (==) intel(1): Backing store disabled
[  2314.914] (==) intel(1): Silken mouse enabled
[  2314.914] (II) intel(1): HW Cursor enabled
[  2314.914] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2314.917] (==) intel(1): DPMS enabled
[  2314.917] (II) intel(1): [XvMC] xvmc_vld driver initialized.
[  2314.917] (II) intel(1): [DRI2] Setup complete
[  2314.917] (II) intel(1): [DRI2]   DRI driver: i965
[  2314.917] (II) intel(1): direct rendering: DRI2 Enabled
[  2314.917] (WW) intel(1): Option "Below" is not used
[  2314.917] (WW) intel(1): Option "Rotate" is not used
[  2314.917] (==) intel(1): hotplug detection: "enabled"
[  2314.917] (--) RandR disabled
[  2314.930] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2314.930] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2314.930] (II) AIGLX: enabled GLX_ARB_create_context
[  2314.930] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2314.930] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[  2314.930] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2314.930] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2314.930] (II) AIGLX: Loaded and initialized i965
[  2314.930] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2314.930] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2314.930] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2314.930] (II) AIGLX: enabled GLX_ARB_create_context
[  2314.930] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2314.930] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[  2314.930] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2314.930] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2314.930] (II) AIGLX: Loaded and initialized i965
[  2314.930] (II) GLX: Initialized DRI2 GL provider for screen 1
[  2314.931] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[  2314.956] (II) intel(0): Setting screen physical size to 361 x 203
[  2314.956] (II) intel(1): switch to mode 1366x768 on crtc 5 (pipe 1)
[  2314.988] (II) intel(1): Setting screen physical size to 361 x 203
[  2315.000] (II) XKB: reuse xkmfile /tmp/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
[  2315.000] (II) Using input driver 'evdev' for 'Mouse0'
[  2315.000] (**) Option "CorePointer"
[  2315.000] (**) Mouse0: always reports core events
[  2315.000] (**) evdev: Mouse0: Device: "/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse"
[  2315.001] (--) evdev: Mouse0: Vendor 0x46d Product 0xc019
[  2315.001] (--) evdev: Mouse0: Found 12 mouse buttons
[  2315.001] (--) evdev: Mouse0: Found scroll wheel(s)
[  2315.001] (--) evdev: Mouse0: Found relative axes
[  2315.001] (--) evdev: Mouse0: Found x and y relative axes
[  2315.001] (II) evdev: Mouse0: Configuring as mouse
[  2315.001] (II) evdev: Mouse0: Adding scrollwheel support
[  2315.001] (**) evdev: Mouse0: YAxisMapping: buttons 4 and 5
[  2315.001] (**) evdev: Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2315.001] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[  2315.001] (II) evdev: Mouse0: initialized for relative axes.
[  2315.001] (**) Mouse0: (accel) keeping acceleration scheme 1
[  2315.001] (**) Mouse0: (accel) acceleration profile 0
[  2315.001] (**) Mouse0: (accel) acceleration factor: 2.000
[  2315.001] (**) Mouse0: (accel) acceleration threshold: 4
[  2315.001] (II) Using input driver 'evdev' for 'lvds1touchscreen'
[  2315.001] (**) Option "CorePointer"
[  2315.001] (**) lvds1touchscreen: always reports core events
[  2315.001] (**) evdev: lvds1touchscreen: Device: "/dev/input/by-id/usb-Cypress_Semiconductor_CYTCB4S-01001_1B0B08E9022A0430-event-if00"
[  2315.001] (--) evdev: lvds1touchscreen: Vendor 0x4b4 Product 0xc001
[  2315.001] (--) evdev: lvds1touchscreen: Found absolute axes
[  2315.001] (--) evdev: lvds1touchscreen: Found absolute multitouch axes
[  2315.001] (--) evdev: lvds1touchscreen: Found x and y absolute axes
[  2315.001] (--) evdev: lvds1touchscreen: Found absolute touchscreen
[  2315.001] (II) evdev: lvds1touchscreen: Configuring as touchscreen
[  2315.001] (**) evdev: lvds1touchscreen: YAxisMapping: buttons 4 and 5
[  2315.001] (**) evdev: lvds1touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2315.001] (II) XINPUT: Adding extended input device "lvds1touchscreen" (type: TOUCHSCREEN, id 7)
[  2315.002] (II) evdev: lvds1touchscreen: initialized for absolute axes.
[  2315.002] (**) lvds1touchscreen: (accel) keeping acceleration scheme 1
[  2315.002] (**) lvds1touchscreen: (accel) acceleration profile 0
[  2315.002] (**) lvds1touchscreen: (accel) acceleration factor: 2.000
[  2315.002] (**) lvds1touchscreen: (accel) acceleration threshold: 4
[  2315.002] (II) Using input driver 'evdev' for 'keyboard0'
[  2315.002] (**) Option "CoreKeyboard"
[  2315.002] (**) keyboard0: always reports core events
[  2315.002] (**) evdev: keyboard0: Device: "/dev/input/by-id/usb-_USB_Keyboard-event-kbd"
[  2315.002] (--) evdev: keyboard0: Vendor 0x4d9 Product 0x1702
[  2315.002] (--) evdev: keyboard0: Found keys
[  2315.002] (II) evdev: keyboard0: Configuring as keyboard
[  2315.002] (II) XINPUT: Adding extended input device "keyboard0" (type: KEYBOARD, id 8)
[  2315.002] (**) Option "xkb_rules" "evdev"
[  2315.002] (**) Option "xkb_model" "evdev"
[  2315.002] (**) Option "xkb_layout" "fr"
[  2315.003] (II) XKB: reuse xkmfile /tmp/server-1773A72ADF3912178EB836318CC241E672AD6AB1.xkm
[  2315.005] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  2315.005] (II) AutoAddDevices is off - not adding device.
[  2315.005] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[  2315.005] (II) AutoAddDevices is off - not adding device.
[  2315.005] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  2315.005] (II) AutoAddDevices is off - not adding device.
[  2315.006] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  2315.006] (II) AutoAddDevices is off - not adding device.
[  2315.006] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  2315.006] (II) AutoAddDevices is off - not adding device.
[  2315.006] (II) config/udev: Adding drm device (/dev/dri/card0)
[  2315.006] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event15)
[  2315.006] (II) AutoAddDevices is off - not adding device.
[  2315.006] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event16)
[  2315.006] (II) AutoAddDevices is off - not adding device.
[  2315.006] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event17)
[  2315.006] (II) AutoAddDevices is off - not adding device.
[  2315.007] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event18)
[  2315.007] (II) AutoAddDevices is off - not adding device.
[  2315.007] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event5)
[  2315.007] (II) AutoAddDevices is off - not adding device.
[  2315.007] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event6)
[  2315.007] (II) AutoAddDevices is off - not adding device.
[  2315.007] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[  2315.007] (II) AutoAddDevices is off - not adding device.
[  2315.007] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[  2315.007] (II) AutoAddDevices is off - not adding device.
[  2315.008] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01002 (/dev/input/event12)
[  2315.008] (II) AutoAddDevices is off - not adding device.
[  2315.008] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01002 (/dev/input/mouse1)
[  2315.008] (II) AutoAddDevices is off - not adding device.
[  2315.008] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01002 (/dev/input/event8)
[  2315.008] (II) AutoAddDevices is off - not adding device.
[  2315.008] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01001 (/dev/input/event13)
[  2315.008] (II) AutoAddDevices is off - not adding device.
[  2315.008] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01001 (/dev/input/mouse2)
[  2315.008] (II) AutoAddDevices is off - not adding device.
[  2315.009] (II) config/udev: Adding input device Cypress Semiconductor CYTCB4S-01001 (/dev/input/event9)
[  2315.009] (II) AutoAddDevices is off - not adding device.
[  2315.009] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[  2315.009] (II) AutoAddDevices is off - not adding device.
[  2315.010] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[  2315.010] (II) AutoAddDevices is off - not adding device.
[  2315.010] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event11)
[  2315.010] (II) AutoAddDevices is off - not adding device.
[  2315.010] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[  2315.010] (II) AutoAddDevices is off - not adding device.

ServerLayout "default"
|-->Screen "Screen0" (0)
|   |-->Monitor "Monitor0"
|   |-->Device "Intel0"
|-->Screen "Screen1" (1)
|   |-->Monitor "Monitor1"
|   |-->Device "Intel1"
|-->Input Device "Mouse0"
|-->Input Device "lvds1touchscreen"
|-->Input Device "keyboard0"


dir a |-->Input Device "lvds2touchscreen" que c'est le screen 1

Hors ligne

#3 Le 07/02/2013, à 23:04

methyl

Re : [Résolu] Acer iconia pau-30 carte graphique intel et Separate X screen

Re un peux de nouveau,

j'ai fini par trouvé une parade pour le moment avec les Multi-pointer X

petit programme pour joué avec les screens et les multiple pointeur j'ai pas réusi avec xdotool

//sudo aptitude install libxi-dev
#include <X11/extensions/XInput2.h>
#include <stdio.h>


int main(int argc, char *argv[]){
	Display *XSession = XOpenDisplay(NULL);

	int OriginScreen = 0;
	int id = atoi((argv[1]));
	int screen = atoi((argv[2]));
	int x=atoi((argv[3]));
	int y=atoi((argv[4]));
	XIWarpPointer (XSession, id , None ,RootWindow(XSession, screen), 0 , 0 , 0 , 0 , x , y ) ;
	XFlush(XSession);
	XCloseDisplay(XSession);
	printf("id%d screen%d\n", id,screen);
	exit(0);
}
gcc main.c -lXi

xinput create-master lvds2 #cree un 2 emme pointeur
xinput
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ lvds1touchscreen                          id=8    [slave  pointer  (2)]
⎜   ↳ lvds2touchscreen                          id=9    [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ keyboard0                                 id=7    [slave  keyboard (3)]
⎡ lvds2 pointer                                 id=10   [master pointer  (11)]
⎜   ↳ Mouse0                                    id=6    [slave  pointer  (10)]
⎜   ↳ lvds2 XTEST pointer                       id=12   [slave  pointer  (10)]
⎣ lvds2 keyboard                                id=11   [master keyboard (10)]
    ↳ lvds2 XTEST keyboard                      id=13   [slave  keyboard (11)]

xinput reattach 6 10
./a.out 6 1 0 0  #fais passé lvds1touchscreen et lvds2touchscreen les tactile sur ecran du bas

Source x-dual-head-one-graphic-card
https://wiki.archlinux.org/index.php/Multi-pointer_X

TO DO
Boir un café

xinput create-master lvds2
xinput reattach 2 1
./a.out 6 1 0 0  

sa marche bien avec la souri mais pas avec les tactile le curseur ne bouge plus

donc je résume:
écran LVDS2 et toujours inversé de 180 le tactile également je vais donc crée interface dans autre sens
pour utilisé les 2 écrans tactile je suis obligé utilisé la commande

./a.out 6 1 0 0 pour lvds2 
./a.out 6 0 0 0 pour lvds1 

je post des photo et la video conf numero de carte bleu  et code mutitouch qt utilisé si sa peux intérésé

j'ai donc rencontré 3 probléme a resoudre
- Coordinate Transformation Matrix
- Option "Rotate"  "inverted"
- xinput create-master lvds2 / xinput reattach 2 1 pour les tactile

un grand merci à toute les personne qui mon aidé pour la partie intel et lvds2

Dernière modification par methyl (Le 07/02/2013, à 23:09)

Hors ligne

#4 Le 10/03/2013, à 16:02

methyl

Re : [Résolu] Acer iconia pau-30 carte graphique intel et Separate X screen

Hors ligne

#5 Le 18/08/2014, à 09:57

methyl

Re : [Résolu] Acer iconia pau-30 carte graphique intel et Separate X screen

Suite >> http://forum.ubuntu-fr.org/viewtopic.ph … #p17752301

Dernière modification par methyl (Le 18/08/2014, à 10:13)

Hors ligne